PTC introduces Mathcad 15.0 M030, a maintenance release that builds on Mathcad 15.0 F000 by making adjustments for compatibility with newer PTC products and providing fixes for known issues. Some key fixes include resolving issues with calculating determinants of small matrices, integral solutions, and symbolic calculations. Mathcad 15.0 M030 also enables conversion of worksheets to the MCDX format required for Mathcad Prime 3.0. The release continues support for Microsoft Windows and interoperability with PTC Creo and Windchill products.
How Accurate is Future Facilities 6Sigma DCXRobert Schmidt
We know that our customers need accurate results that they can rely on to make critical decisions. We understand these challenges, and we’ve worked hard to ensure that 6SigmaDCX achieves this. Since the first release of the software, we’ve used the expertise of our internal development and engineering teams to develop room-scale models and their individual components. Furthermore, independent audits have been carried out by R&D establishments and educational bodies to validate the 6SigmaDCX software. The results of these audits, along with positive messages from end users, show that 6SigmaDCX provides the accuracy needed to make critical decisions about your facility’s performance.
How Accurate is Future Facilities 6Sigma DCXRobert Schmidt
We know that our customers need accurate results that they can rely on to make critical decisions. We understand these challenges, and we’ve worked hard to ensure that 6SigmaDCX achieves this. Since the first release of the software, we’ve used the expertise of our internal development and engineering teams to develop room-scale models and their individual components. Furthermore, independent audits have been carried out by R&D establishments and educational bodies to validate the 6SigmaDCX software. The results of these audits, along with positive messages from end users, show that 6SigmaDCX provides the accuracy needed to make critical decisions about your facility’s performance.
PTC announces the availability of PTC Mathcad Prime® 3.1 engineering calculation software, designed for engineers who want to analyze, solve, document and share vital calculations and design intent. This new version allows users to better connect engineering calculations to other applications and processes including PTC Creo® 3.0 and other third-party tools.
PTC Introduces PTC Mathcad® Prime™ 3.0; Supports the Most Advanced Engineerin...PTC
NEEDHAM, MA – October 2, 2013 – PTC (Nasdaq: PMTC) today announced the availability of PTC Mathcad Prime 3.0, the latest version of its engineering calculation software designed for solving, analyzing and sharing engineering design knowledge. PTC Mathcad Prime 3.0 has significantly improved its calculation capabilities to allow more complex equations to be solved, faster. PTC Mathcad offers hundreds of mathematical functions, the unlimited ability for users to define their own, the capability to solve equations both numerically and symbolically, and the power to solve the most complex systems of equations.
PTC announces the availability of PTC Mathcad Prime® 3.1 engineering calculation software, designed for engineers who want to analyze, solve, document and share vital calculations and design intent. This new version allows users to better connect engineering calculations to other applications and processes including PTC Creo® 3.0 and other third-party tools.
PTC Introduces PTC Mathcad® Prime™ 3.0; Supports the Most Advanced Engineerin...PTC
NEEDHAM, MA – October 2, 2013 – PTC (Nasdaq: PMTC) today announced the availability of PTC Mathcad Prime 3.0, the latest version of its engineering calculation software designed for solving, analyzing and sharing engineering design knowledge. PTC Mathcad Prime 3.0 has significantly improved its calculation capabilities to allow more complex equations to be solved, faster. PTC Mathcad offers hundreds of mathematical functions, the unlimited ability for users to define their own, the capability to solve equations both numerically and symbolically, and the power to solve the most complex systems of equations.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
2. Microsoft Excel 2007 Support
Various components that previously supported only Microsoft Excel 2003 .xls format
can now handle Microsoft Excel 2007 .xlsx and .xlsm format.
•
New READEXCEL and WRITEEXCEL functions to read and write data to and from Excel
2007 file format
•
New READCSV and WRITECSV functions for access to data files in comma-separated
value format
New Integrated Capabilities from Mathcad Partners
Mathcad 15.0 offers integrated capabilities and access to rich engineering and analytical
toolsets provided by the following strategic Mathcad partners:
•
Kornucopia®—Offers a broad collection of functions and interactive templates
specifically designed to easily and quickly blend Experimental Data, Simulation
Results (FEA and others), Analytical Calculations, and Analysis Algorithms into more
accurate, reusable, well documented Mathcad worksheets.
•
Truenumbers®—Register to download and install the Truenumbers application and
plug-in. They allow you to turn Mathcad numbers into Truenumbers for use in
Microsoft Office or on the Web.
To access these toolsets, click the Mathcad Tools menu.
Installing Mathcad 15.0 M030
For the most up-to-date installation information, see the Mathcad 15.0 Administrator’s
Guide. You can find the guide in the installation CD and on the Reference Documents
page at http://www.ptc.com/appserver/cs/doc/refdoc.jsp.
Coexistence with Previous Versions
If you have Mathcad 15.0 F000, Mathcad 15.0 M005, Mathcad 15.0 M010, or Mathcad
15.0 M020 installed, PTC recommends that you upgrade to the latest version and not
uninstall the prior one first. This method saves the user-defined settings. Previous
versions of Mathcad are automatically removed from the system during the upgrade.
Mathcad 15.0 M030 cannot be installed on a workstation currently running Mathcad 14.
Mathcad 14 must be uninstalled before installing Mathcad 15.0 M030. If you do not
uninstall Mathcad 14, the Mathcad 15.0 M030 installation process backs-up your Ebooks, templates, and user-defined DLLs; removes Mathcad 14; and then installs
Mathcad 15.0 M030.
You can however install Mathcad 15.0 M030 alongside any version of Mathcad Prime
and Mathcad 11, 12, and 13. You do not need to uninstall these versions of Mathcad
before you install Mathcad 15.0 M030, nor does installing Mathcad 15.0 M030
automatically remove these Mathcad installations.
Note: After Mathcad 14 is uninstalled, you should run a repair of Mathcad 11, 12, and 13
in that order if you have those versions installed.
2
Mathcad 15.0 M030
3. Restoring Mathcad 14.0 and Mathcad 15.0 Customized Information
When you uninstall Mathcad 14.0 or Mathcad 15.0, your electronic books, user-defined
DLLs, and any templates you have created are automatically backed up. To move the
backed up files to the Mathcad 15.0 M030 installation directory, follow these steps:
1. Open the folder %AppData%Mathcad14Installation Backup. For example,
D:UsersjsmithAppDataRoamingMathsoftMathcad14Installation
Backup. Verify that it contains the following subfolders: handbook, template and
userefi.
2. Copy all template files (*.mct) and subfolders from the Installation
Backuptemplate folder to C:Program Files (x86)MathcadMathcad
15template<language>. For example, for English, the folder is EN. You must
paste the files into their corresponding subfolders.
3. Copy all user-defined DLLs and subfolders from the Installation
Backupuserefi folder to C:Program Files (x86)MathcadMathcad
15userefi. You must paste the files into their corresponding subfolders.
4. To restore all your previously installed handbooks:
a. Open the folder %AppData%Mathcad14Installation Backuphandbook.
For example, the folder
D:UsersjsmithAppDataRoamingMathsoftMathcad14Installation
Backuphandbook contains the ROARKS.HBK and ROARKS folder.
b. Copy all *.hbk files and the corresponding E-books subfolders under the
Handbook folder to C:Program Files (x86)MathcadMathcad
15handbook .
For example, the ROARKS.HBK and ROARKS subfolder under
D:UsersjsmithAppDataRoamingMathsoftMathcad14
Installation Backuphandbook folder must be copied to C:Program
FilesMathcadMathcad 15Handbook.
You should now be able to open your previous Mathcad E-books from Help > Ebooks.
Contact technical support if you want to point to those E-books in an alternative
location.
Mathcad 15.0 M030
3
4. Documentation
To access Mathcad documentation from the PTC website, you must have a PTC account.
Licensing
Licensing options include commercial via a server or locked node, academic, and trial
licenses.
Operating System Support
Operating System
Version
Microsoft Windows XP x32
Windows XP Professional SP2 and SP3 x32 Edition and
Windows XP Home Edition SP2 and SP3, Internet
Explorer 6.0 SP1 or later
Microsoft Windows XP x64
Windows XP Professional x64 Edition SP2 and SP3,
Internet Explorer 6.0 SP1 or later
Microsoft Windows Vista
Windows Vista Ultimate, Windows Vista Business, and
Vista Enterprise, Base OS (x32 and x64 editions) and
Service Pack 1, Internet Explorer 7.0
Microsoft Windows 7
Windows 7 Home Premium Edition, Windows7
Professional Edition, and Windows 7 Ultimate Edition,
Base OS (x32 or x64 editions), Internet Explorer 7.0 SP1
or later
System Requirements and Hardware Certification Information
The Mathcad installation process requires 1.75 GB hard disk space as follows:
•
350 MB on the drive to install the program
•
700 MB on the drive containing the %temp% folder
•
700 MB on the drive containing the %windir% folder
When the installation process is complete, the installer removes all data from the
%temp% and %windir% temporary folders. Refer to the Technical Support Knowledge
Base at http://www.ptc.com/support/mathcad.htm for more information.
Visit the Platform Support page for Mathcad 15.0 M030 for current system
requirements and certified hardware configurations:
http://www.ptc.com/partners/hardware/current/support.htm
4
Mathcad 15.0 M030
5. Interoperability
PTC Product
™
Interoperability with Mathcad 15.0 M030
Creo Parametric 2.0
Asynchronously map Creo Parametric input and output
parameters to associated Mathcad variables from within the
Mathcad Analysis Feature interface within Creo Parametric.
Creo Elements/Pro™ 5.0
(formerly Pro/ENGINEER®
Wildfire®)
Asynchronously map Creo Elements/Pro input and output
parameters to associated Mathcad variables from within the
Mathcad Analysis Feature interface within Creo
Elements/Pro.
Windchill Workgroup
Manager (Windchill
PDMLink®,
Pro/INTRALINK®,
Windchill ProjectLink™)
Work directly from Mathcad with these products. For
example, you can check in and checkout files to Windchill,
and you can open and save your Windchill files from
Mathcad. Maintain revisions and client-side viewables, and
retain necessary file associations.
Language Support
The Mathcad 15.0 M030 user interface, Online Help, Resource Center and
documentation are localized into French, German, Italian, Spanish, Japanese, Korean,
Simplified Chinese, and Traditional Chinese. Note that the Mathcad 15.0 M010 versions
of the User's Guide and Getting Started Guide are still valid for Mathcad 15.0 M030. The
Mathcad 15.0 M030 user interface and the Mathcad 15.0 User’s Guide are also localized
into Russian. The Online Help, Resource Center, and other documentation are not
available in Russian for Mathcad 15.0 M030.
Keyboard Shortcuts
The keyboard shortcuts for each language are linked from the main table of contents for
QuickSheets and Tutorials, under the Help menu.
Mathcad 15.0 M030
5
6. Notable Fixes for Mathcad 15.0
Customer-reported issues that were fixed with the Mathcad 15.0 releases follow:
SPR Number
Description
Mathcad 15.0 M030
1519535
1821593
Fixes an issue for calculating the determinant of small
matrices
1863725
Fixes an issue where the userdll header did not protect
input arrays such that, during coding of a dll, the program
was able to overwrite input array contents
1906857
Fixes an inline evaluation issue in a FOR loop with more
than 999 iterations
1969684
Fixes a calculation issue when solving a specific equation
1996504
Fixes a calculation issue with complementary error function
erfc
2035504
Fixes an issue on Windows 7.0 involving the display of
Mathcad document types on the desktop shortcut menu
command New
2115488
Fixes a calculation issue with an incorrect integral result
2124174
Fixes incorrect description of the function Odesolve in the
Insert Function menu
2133542
Fixes a calculation issue giving incorrect results for a
specific symbolic integral
2149249
Fixes an issue when using large datasets with the function
WRITEEXCEL
2162871
Fixes an issue with Trace operation on 2D plots
2172775
Fixes a zombie process issue that affected the conversion
functionality to PTC Mathcad Prime
2172778
Fixes a memory leak issue that affected the conversion
functionality to PTC Mathcad Prime
2183809
Fixes an issue with Mathcad installation that impacted
Windchill integration
2188982
6
Fixes a calculation issue with certain integral routines not
converging to a solution by adjusting the TOL value and
allowing you to manually set the TOL for the integrator
Fixes a WRITEEXCEL function output that resulted in an
array index error
Mathcad 15.0 M030
7. 2189469
Fixes a calculation error when replacing a string in a vector
with a scalar
2190598
Fixes a calculation error with solve block function Find
when using stack command
2194727
Fixes an issue with overlapping regions on opening
worksheets with OLE objects that do not have the associated
application
2194733
Fixes a calculation issue with a specific indefinite integral
2202079
Fixes a calculation issue when symbolically solving specific
integrals
2202083
Fixes a zombie process issue that affected the conversion
functionality to PTC Mathcad Prime
Mathcad 15.0 M020
1425866
Fixes an issue with incorrect results for the invlaplace
transform
1453863
Fixes an issue involving the display of floating toolbars
when more than one screen is involved
1943125
Fixes memory issues that occur while performing multiple
recalculations of a program that reads or writes data to an
external data file
2008206
Fixes an issue in which, after renaming a defined variable,
Mathcad continues to treat certain later references to
variables with the old name as if they were still defined
2015694
Fixes a crash when you attempt to open an e-book from a
local folder where the maximum filename size is exceeded
2018490
Fixes an issue with worksheet corruption with the normal
find function
2035300
Fixes a crash when you select and copy specific regions in a
worksheet
2047116
Fixes a memory issue resulting in crash in certain copy and
paste operations
2048135
Fixes an Out of Memory error for specific symbolic
calculations
2058106
Fixes a failure to borrow a license when you install Mathcad
silently
2060257
Fixes a crash when Mathcad tries to solve a specific complex
equation
Mathcad 15.0 M030
7
8. 2070478
2086451
Fixes a crash that occurs while Mathcad solves a particular
set of calculations symbolically
2097699
Fixes a crash when you select and copy specific regions in a
worksheet
2101947
Fixes an internal error when Mathcad tries to calculate a
specific worksheet
2103837
Fixes a crash caused by the use of a particular invalid
syntax (nested matrices) within a request for a symbolic
solution
2104207
Fixes the calculation of Ai, Bi, DAi, DBi and their scaled
counterparts when these functions occur in chained symbolic
calculations
2109282
Fixes a problem where “partial derivative” display format
for certain derivatives was lost when the worksheet was
saved and reopened.
2109574
Fixes a worksheet corruption issue related to circular chain
of style definitions
2111700
Updates the unhelpful error message This function
cannot be used here with a more helpful message when
you use the statespace function with certain improper
arguments
2112709
Fixes incorrect computation of symbolic limits in certain
very specific situations
2118368
Fixes an incorrect result when you are evaluating the rref
function numerically for a specific nonsquare matrix
2121711
Fixes a problem where certain controls were missing in the
interactive dialog for customizing 3D plots in Simplified
Chinese
2124483
Fixes a calculation error with the gcd function
2140151
Addresses a compatibility issue with Windows 7 Aeroenabled themes
2145756
Fixes a problem where the WRITEEXCEL command hangs
when writing to large files
2145757
8
Fixes a memory leak issue when you manipulate RGB
images
Fixes the calculation of the polyfitc function so that when
calculating the p-value for coefficients with negative Tvalues, the absolute value to the T-value is used
Mathcad 15.0 M030
9. 2146795
Fixes memory leak issues involving the MathcadArrayFree
API available to user-defined DLLs
2146985
Fixes a file conversion issue related to memory errors
Mathcad 15.0 M010
1412775
Fixes a problem with symbolic calculation of a single line
definition and evaluation combined with units
1417879
Addresses a false error message that appears when
symbolically evaluating e/n! from n=1 to infinity
1858746
Addresses a problem with an unchanging cursor during
worksheet recalculation
1893304,
2056070
Addresses a problem with a combination of an inline
evaluation containing units and a symbolic evaluation that
is followed by numerical evaluation
1971427
Addresses a problem with the display of the Mathcad file
icon when opening a file in some languages from a CAD
application
1971450
Addresses a problem with opening a file from Mathcad in
some languages
1990321,
1990338,
1990387,
1990725
Addresses a problem with missing information in the setup
license agreement of the Excel add-in
1992079
Fixes a problem with sending an unsaved Mathcad file
1999572,
2073923
Fixes a problem with accessing handbooks that were
downloaded for Mathcad 14.0 after upgrading to Mathcad
15.0
2003017
Resolves a problem with missing search criteria in Windows
XP after installing Mathcad 15.0
2007304
Fixes a problem with assigning data to a variable using an
Excel component and an existing Excel 2007 file
2013054
Fixes a problem with rref function calculation
2015172
Addresses a problem of an inaccurate message about
Mathcad adapters and an inaccurate tooltip
2031800
Fixes a problem with a duplicated PTC Places icon in the
Open File dialog box
2031831
Fixes a problem with WRITEEXCEL function where decimal
numbers are converted to strings if Windows is set to use a
decimal comma
Mathcad 15.0 M030
9
10. 2035004
Fixes a problem with PDM actions that were missing in
Mathcad
2035612
Fixes a problem with adding a row to a matrix that was
pasted from Excel 2007
2045673
Addresses a problem with missing product code text boxes in
some languages in the license wizard
2046815
Addresses an installer issue for untranslated dialog boxes
for some languages
2050585
Fixes the problem with the installer deleting the user
templates and DLLs while upgrading from Mathcad 15.0
F000 to Mathcad 15.0 M005
2053486
Fixes a crash that occurs when opening Mathcad under a
Windows account name with double-byte characters
2055836
Addresses a problem with unavailable controls in the
Overview and Quick Tour of Mathcad tutorial specifically in
the Automation Example
2062986
Fixes a problem of different results for VHlookup and
Vlookup deprecated functions in Mathcad 15.0 and in
Mathcad Prime 1.0
2063201
Fixes a problem with density calculation for Chi-squared
probability
2067322
Fixes incorrect results returned by the eigenvals function
for skew symmetric matrices
207393
Addresses an issue of backing up and restoring Mathcad 14
E-books, templates, and user-defined DLLs after installing
Mathcad 15 M010
Mathcad 15.0 M005
1863876,
1980262
Addresses the problem of a Mathcad process running after
exiting a Mathcad session
1998193
Fixes incorrect search results in a search of the Resource
Center
2012625,
Fixes the problem of illegal Anova function calculation
2063227
2014092
Resolves a problem with opening a file containing an Excel
component that cannot be loaded
Mathcad 15.0 F000
N/A
10
Resolves all reported compatibility issues with Windows 7
Mathcad 15.0 M030
11. 1401398
Fixes the incorrect Invlaplace transform result Mathcad
returns for simple rational function
1406906
Fixes a problem in automation involving setting the value of
Greek letters
1425866
Fixes specific incorrect results from inverse Laplace
transform.
1454096
Resolves a problem borrowing the last license from a pool of
Mathcad licenses
1507803
Fixes a specific memory leak problem
1611658
Enhances the eigenvals and eigenvec functions for
handling special cases of real symmetric and Hermitian
matrices
1703193
Addresses a calculation problem that occurs when parsing or
displaying a cross-product equation
1734123
Extends the rref function to accept matrices of symbolic
expressions, not just scalars
1743813
Fixes a problem related to the export of data tables
containing integers and strings from Mathcad to Excel
1744290
Fixes a problem of incorrect result for symbolic definite
integral involving the sin function
1751901
Addresses a problem of incorrect result for the definite
integral of A*sin(2*pi*t/T) between 0 to T/2
1773587
Fixes a performance problem related to embedding a
Mathcad object in an Excel file
1779509
Fixes a problem related to delete and insert elements on a
matrix that is copied from Excel
1779925
Fixes a problem with Print and Print Preview in specific
situations involving the Microsoft Multilingual User
Interface
1792234
Corrects erroneous results when Mathcad multiplies uneven
arrays by truncating the calculations
1815545
Fixes a problem with silent installations of Mathcad under
the Windows Vista operating system
1841454
Resolves a problem related to saving a .mcd file as .xmcd
1863876
Corrects a situation where mathcad.exe continued to run
after exiting
Mathcad 15.0 M030
11