Muhammad Raza Abbas is an electrical technician with over 7 years of experience in erection, commissioning, start up, maintenance, and shutdown activities for various industries in Pakistan. He holds a B-Tech in Electrical Power Engineering and certificates in computer applications and electrical technology. Currently he works as an electrical technician at Pak-American Fertilizer, where his responsibilities include supervising maintenance of electrical systems, generators, motors, transformers, and more. He also has experience planning and executing shutdowns, installing and troubleshooting instruments, and training junior staff.

1. Muhammad Raza Abbas
House # 1796/6m, Mohalla Hazarian Wala,
O/s Dehli Gate Multan,
Punjab, PAKISTAN
+92-3146112455
+92-61-4581199
eng.razaabbas@gmail.com
Skype raza.abbas253
Objective
More than 7 years of working experience in erection, commissioning, start up and
maintenance activities in Descon Engineering Projects and Fertilizer. Experience of shut
down in different industries. Currently Working as Electrical Technician at Pak-American
Fertilizer, Pakistan from 2010.
Educational Qualification
B-Tech (Electric al Power) 2010 B.Z. University Multan.
D.A.E. (Electrical Technology) 2007 P.B.T.E. Lahore.
Vocational Training Certificat 2006 G.T.T.I. Multan.
(Electricien GRADE-III)
S.SC. 2004 B.I.S.E Multan.
Certificate Of Competency
Certificate Of Competency as a competent Electrical Supervisor.
Reg. No. E/M309
Computer Skills
Certificate in Computer Applications (CCA) 2011 (G.T.T.I.) Multan, Pakistan.
MS Office, Auto CAD, HTML,CSS.
Working Experience (Electrical Technician)
• Recently working as Electrical Technician at Pak-American Fertilizer Mianwali ,
Pakistan from June 2011 .
• Worked as an Electrical Technician in IPC (International Petrochemical Chemicals
Limited) Lahore, Pakistan from Aug 2008 to Apr 2010.
• Worked as an Electrical Technician in Children Hospital Complex Multan from Sep
2007 to Jul 2008.
Page 1 of 3

2. Job Responsibilities
• To supervise and mange all Maintenance and Operation activities on electrical
systems, control room and equipment in assigned field, covering generators & controls,
L.V/ H.V motors & control circuits, transformers, cables, H.V overhead lines, electrical
pumps and Electrical protection systems.
• Experience of cable laying, cable termination, megger testing, VFD controlling.
• To supervise and participate in preventive, corrective and troubleshooting maintenance
of 210KVA, 500KVA Diesel Generators.
• To supervise the installation of transmitters, control valves and other field instruments
according to Plot Plan and P&I drawings.
• To read / understand the loop sheets, cause & effects and schematic diagrams.
• To supervise and participate in preventive, corrective and troubleshooting
maintenance, and testing of all plant instrument & control systems equipment.
• To supervise, coordinate and participate in the preventive, corrective and
troubleshooting / maintenance activities of the plant equipment at the assigned
location.
• To participate in the planning, scheduling and execution of shutdown and major
overhaul maintenance activities.
• To assist the section head in establishing priorities, making improvements on work
methods and to participate in evaluating modification proposals, failure analysis and
unscheduled shutdowns.
• Experience of electrical fault finding, preventative maintenance, and repairs of the
following equipment: Centrifugal gas compressors, Air compressors – Reciprocating and
screw, High pressure water injection pumps, Sea water lift pumps for process and fire
fighting. Centrifugal submersible lift pumps, General types of oil and water pumps,
Centrifugal, screw, gear, plunger, piston or diaphragm pumps.
• To comply with Organization's Health, Safety and Environment (HSE) Environment as
well as Work Permit, policies and procedures and also promote awareness of its use
among the staff.
• To prepare the list of spares, tools and other material required for the maintenance jobs
and issue the Purchase/Material requisitions for the Section Head approval.
• To inspect and confirm that the specifications are in line with the requirement of the
received 'direct charge' and ‘stock Materials’.
• To conduct Toolbox meetings with subordinates for discussing safety and methods of
completing job tasks.
• To evaluate equipment performance problems and to suggest modification / available
new technology to reduce overall maintenance cost.
• To direct and participate in performing maintenance of instrument and control systems
and advise on the maintenance schedule based on the analysis.
• To interface and coordinate with other sections in sorting out equipment problems and
maintenance activities.
• To supervise, manages and coordinates his Assistant's activities efficiently so as to reach above
described objectives. Maintain relations with the Contractor's electrical erection teams so that
interactions between Owner's specialists and Contractor's erection teams function smoothly.
• To plan Pre shutdown arrangements such as instruments spare listing and ordering,
work schedule preparation and updating, revising data for instrument, can read and
interpret instrument drawings, Job safety analysis preparation, preparing job plans for
plant instruments.
• To monitor and ensure that the shutdown maintenance jobs are carried out within the
scheduled time frame.
• To remove, dismantle, overhaul/repair and install electric, pneumatic, electronic or
hydraulic control system such as control valves and actuators, recorders, measuring and
recording instruments in the field or in the workshop.
Page 2 of 3

3. • To identify and use a variety of test and measurement equipments including digital and
analog voltmeters, pneumatic and smart calibrators.
• To perform preventive and emergency maintenance on all equipment on site, as well as
during machine scheduled or unscheduled shutdowns.
• To perform modification of control circuits and/or control loops as per the plant change
request and update all related plant drawings to reflect the actual changes.
• To assist other sections such as electrical, mechanical and workshop in the repair and
troubleshooting of their instrument and electronic related systems and test equipment.
• To perform upgrade and retrofitting of new control instruments to the existing panels
in the field and main control room.
• To train and develop the assigned junior staff.
Vocational Training Courses
• One year Vocational Training Course in Electrical Technology from Govt. Technical
Training Institute of (G.T.T.I.) Multan (Pakistan) in 2006.
• 3 month NAVTEC- TEVETA SPECIAL TRAINING PROGRAMME certificate in
MOTOR WINDING and placed in A+
grade.
Special Training
Fire Fighting,
On the Job / Off the Job Safety and Emergency Handling
Participated in Emergency Discussion, Training and Presentations
Personal Information
Father’s Name Altaf Hussain
Date of Birth July 05, 1988
Marital Status Married
C. N. I. C. # 36302-0536046-3
Passeport # EU1010461
Nationality Pakistani
Page 3 of 3