Rao Chenna-CV

CV of Rao. S. K. Chenna
Page :1 of 8
From :
Chenna S. K. Rao.
Plot No. - 68, Do. No.: 70-17-7/7A
Sasikanth Nagar, R.T.A. Office Road
KAKINADA - 533 003
Andhra Pradesh State, INDIA
Mobile : 0091-9573332250 - India (GMT+05:30)
Mobile : 0091-9885144088 - India (GMT+05:30)
Tel. No. : 0091-884-2351641 / 2343155 - India
E-mail Address: chskrao@rediffmail.com
chskrao@gmail.com
Date : 18/10/2016
To Place : Kakinada
HR Manager
Respected Sir,
Sub : Application for the Post of “Maintenance Planner / Planning Engineer or any suitable post”
Ref. :
This letter is in response to the above subject and reference; I wish to apply for the above position.
My present assignment was completed on 18th July-2016 and I am currently at home in the pursuit of my
next opportunity.
I have passed B. Tech., (Degree in Mechanical Engineering) in 1983. I am a competent Planning Engineer /
Supervisor / Planner with 30 years overseas experience within the Oil / Gas / Petrochemical / Industries. I
consider myself suitably skilled and experienced in the above post and would like to apply.
Please find my updated CV enclosed herewith for your reference, consideration, approval and further
processing. I hope that you will be able to match my background and experience against the vacancies on
your present or future requirement. Any further information you may require, I will gladly provide at any time.
Looking forward to your favorable reply and the opportunity to work for you.
Yours faithfully.
Rao
Rao.S.K.Chenna.
 Mobile:0091-9573332250 - India (GMT+05.30)
 Mobile:0091-9885144088 - India (GMT+05.30)
Phone: 0091-884-2351641 – India (GMT+05.30)
 Email: chskrao@rediffmail.com / chskrao@gmail.com
Enclosures : As above.

Page :2 of 8
CV for “Maintenance Planner / Planning Engineer or any suitable post”
PERSONAL :
Full Name : CHENNA SIVA KOTESWARA RAO
Date of Birth : 4th August, 1957.
Marital status : Married.
Nationality : Indian.
Permanent Address : Plot No : 68, Do.No.:70-17-7/7A, (near) Water Tank,
Sasikanth Nagar, R.T.O. Office Road,
KAKINADA - 533 003, Andhra Pradesh State, INDIA.
Telephone Number : 0091-884- 2351641 / 2343155 (India) (GMT+05:30)
Mobile Number : 0091-9573332250 (India) (GMT+05:30)
0091-9885144088 (India) (GMT+05:30)
E-mail Address : chskrao@rediffmail.com
chskrao@gmail.com
Passport Details : No.: Z-3747084 issued at Visakhapatnam (India),
On 1st June 2016 and Valid up-to 31st May-2026.
Education Qualification : B.Tech., (Degree in Mechanical Engineering)
From : Jawaharlal Nehru Technological University.
Kakinada, Andhra Pradesh State, INDIA.
: Computer Languages and Applications.
From :Shramik Vidyapeeth, Hyderabad, A.P.State, INDIA.
Ministry of Human Resource Dept., Govt. of India.
: Auto-Cad & Auto-Lisp.
From : Central Institute of Tool Design.
Hyderabad, A.P. State, Government of India Society.
Computer Exposure : Microsoft Office (Word, Excel, Access, Power Point, etc.,), Auto-Cad,
Visio, Planning Projects (MS Projects, Primavera-P6) and utilization of the
Computerized Maintenance Management System (CMMS) on Immpower,
SAP and AMOS systems.
Expected Salary : Negotiable
Availability : As soon as possible / 2 weeks
Current Location : India
Availability of Interview : Any Time.
EMPLOYMENT HISTORY :
Organisation Position Period(mm/yy)
1. MODEC Ghana Ltd, Ghana, West Africa Maintenance Planner (FPSO) 04/10 to 07/06
2. HESS,Equatorial Guinea, West Africa Maintenance Planner (FPSO) 04/08 to 03/10
3. Al Furat Petroleum Company (SHELL), Syria. Planning Engineer (Maint. & Eng.) 09/06 to 03/08
4. Al Furat Petroleum Company (SHELL), Syria. Planning Supervisor (Maintenance) 08/97 to 12/05
5. Qatar General Petroleum Corporation, Qatar. Planning Supervisor (Shutdown) April to June 97
6. Nagarjuna Fertilizer and Chemicals Ltd, India. Site Engineer (Construction) 08/96 to 03/97
7. National Methanol Company, Saudi Arabia. Area Planner (Maintenance) 02/95 to 01/96
8. Kuwait National Petroleum Co., Kuwait. Mechanical Engineer (EPC) 07/92 to 03/94
9. Hyderabad Allwyn Limited, India. Assistant Manager (Maintenance) 01/87 to 06/92
10. The Andhra Sugars Limited, India. Mechanical Engineer (Maintenance) 06/84 to 12/86

Page :3 of 8
STATEMENT OF CAREER AIMS:
I have enjoyed a successful career in Mechanical Engineering in the Middle East and India, progressing to
my most recent position as Maintenance Planner with MODEC Company,Ghana, West Africa. I plan to
continue the development of my career in a new environment where my technical and organizational skills
can make a very positive contribution. I would like to take this opportunity to expand my skills by working in a
wide variety of areas in a fast-paced environment.
I am looking forward for a permanent position or contract staff position in Maintenance Planning or
Implementation of CMMS systems within the oil/gas/Mining or utility/Process industry in drilling, operations
and maintenance or EPC construction.
SUMMARY OF EXPERIENCE:
I am a Mechanical Engineering Graduate with over 30 years experience in Oil & Gas, Refinery, Production
Engineering Industry and Chemical & Fertilizers in Planning, Maintenance, Engineering, and Construction
Departments dealing with :
 Providing support to asset and project teams in term of planning activities and activity calendars,
management of asset opportunity lists, and schedule support for the various projects through detailed
schedule developments, monitoring, and controls.
 Plans and advises on implementation strategies for new projects. Prepare and regularly update Onshore
/ Offshore integrated schedules for Maintenance, Engineering and Construction of different project
schedules in MS Projects / Primavera P6. Analyze and highlight potential clashes. Analyze Onshore /
Offshore resource workload and requirements based on the schedule. Onshore / Offshore activity
duration analysis verses estimates. Onshore / Offshore activities yearly statistics showing utilization.
Detailed planning for project upgrades and modification works.
 Plans / schedules preventive maintenance work orders, daily routine jobs related to maintenance
facilities and follow up the scheduled jobs with maintenance in coordination with Operations personnel.
Estimates / plan materials and all other resources for turnaround / shutdown jobs. Initiates / prepares
the plans & actual progress reports for integrated, shutdown and PM / CM jobs.
 Experience in preparing an Integrated Planning, 7-day / 14-day / 90-day / 2-years plans & shutdown plan
& daily planning, scheduling & Estimation on MS Projects, Primavera-P6 and utilization of the
Computerized Maintenance Management System (CMMS) on Immpower, SAP&AMOS.
 Preparation of Mechanical Specifications, Vendor Bid evaluation, Vendor drawing review, and ordering
spare parts etc.
 Installation of Plants & Machinery, Repair and Preventive Maintenance of equipments in Process
Industries and Production Industries.
 Maintenance and Repair of sophisticated computerized semi-automatic machines operating on Hydro
Pneumatic systems in production industries and High precision Tool Room machines etc.,
WORK EXPERIENCE:
1. MODEC Ghana Ltd., Ghana, West Africa April-2010 to July-2016
(Operator by “Tullow Ghana Ltd”)
I worked as an Offshore Maintenance Planner at FPSO Kwame Nkrumah, Jubilee field project (MV21),
Ghana, West Africa for Tullow Ghana Limited from 30th March-2010 with 4 Weeks ON and 4 Weeks
OFF leave schedule with the responsibilities of:
 Ensure that the Computer Maintenance Management System (CMMS) – AMOS is fully implemented
and properly utilized in planning activities whilst taking account of field requirements.
 Ensure to utilize AMOS Maintenance Management System for the data update and closure of work
activities. Track the work orders and requests flow and assure data integrity.
 The primary responsibility includes implementation of preventative maintenance programs for all
production equipment and other service equipment.
 The Update / input of equipment tag structure, maintenance procedures / job descriptions, resource
requirement, etc., into the AMOS CMMS to develop a planned maintenance program and maintain
asset & PM master data. Data entry in different CMMS applications
 Organizing the 14-day and 90-day planning meetings with all Department Heads and OIM.
 Prepare weekly and monthly routine and preventive maintenance plan through corrective and
preventive maintenance planning program AMOS CMMS)
 Prepare by the use of MS project for two weekly look ahead maintenance schedules and 90-day plan.
 Coordinate with all departments to evaluate progress and update against 14-day / 90-day plans and
developing a new planning and implementation activities

Page :4 of 8
 Creating and updating the reference plan for all shutdown activities to be undertaken during facility
turnaround outages and major job plans.
 Review and analyze completed preventive maintenance documentation and generate exception
reports.Generate maintenance KPI reports
 Provide the AMOS Training for new persons and training to enhance effectiveness of maintenance
activities. Assist in development of nationalization program.
 Assist with resource planning for maintenance and coordination of specialist support services.
 Ensure proper resource planning and sourcing for the implementation and completion of planned
maintenance plans and activities as per schedule.
 Analyze and record critical operational and maintenance issues related to the equipment’s, plants and
utilities availability.
 Co-ordinate with contractors / vendors and logistics to ensure smooth implementation of scheduled
work.
 Interface with warehouse, purchasing and store personnel on day-to-day inquiries on material
deliveries, technical information input etc.
 AMOS Data correction / entry in different CMMS applications
a. Material Stock Item Number :- attach / arrange in line with Equipment Number
b. Asset Equipment description:- Text correction various
c. Asset Equipment Number:- Serial #, Type, Model, Manufacturer etc.
d. Asset Equipment’s to arrange in line with Equipment Hierarchy.
e. Asset Equipment’s Routine Schedule to Check / correct various.
f. Asset Equipment :- Various Job Description Task Instruction Check / Correct.
g. Asset Equipment Criticality :-Provide information to the AMOS System Asset Controller.
2. Amerada HESS Equatorial Guinea Inc., West Africa April-2008 to March-2010
(Sponsored by “Wood Group Equatorial Guinea Ltd”)
I worked as an Onshore Maintenance Planner for HESS Company (FPSO/Offshore Platforms/TLP’s)
from April 2008 with 7 weeks ON and 3 weeks OFF rotation at Bata Wood Group Engineering Office, is
based onshore and is the focal point of HESS’s integrated planning effort.I am responsible for
developing, preparing, maintaining and analyzing the integrated scheduling thereby helping to ensure all
work conducted offshore is carried out in a safe, efficient and synchronized manner. This covers the
planning of all disciplines including Drilling, Well Engineering and Operations, Maintenance, Integrity and
Projects with the responsibilities of :
 Collate planning information from the onshore and offshore work owners and develop schedules to
represent this work in the integrated plan. The schedules are required to contain all phases of the
work, including engineering, procurement, fabrication, delivery, and installation and commissioning.
 Contact the offshore planning team and other offshore work owners on a daily basis to discuss any
issues with the plan and to obtain progress updates.
 Responsible for the creation and development of the operations &maintenance, integrated 90-day plan
including major maintenance, engineering and construction activities in MS Projects and Major
shutdown plans and other relevant plans as requested by various departments.
 Develop and update activity plans for projects, construction services and maintenance activities in
conjunction with project engineers, design engineers, construction & maintenance engineers.
 Reviews schedule data, and identify and acquire the information needed to complete work logics to
interface between assigned disciplines or specialties.
 Establishes and implements methods for determining activity durations within assigned disciplines or
specialties.
 Early warning of plan delays and proposals for mitigation to Project Engineers / Construction /
Maintenance Coordinators for resolution.
 Maintains the integrated plan high-level information database and People on Board (POB) forecast.
 Attend regular planning meetings with offshore operations groups to ensure the plan is communicated
and clashes are avoided and to ensure the plans are current and prioritized.
 Interface on a regular / daily basis with all offshore engineers, work owners and planner for
maintenance planning, maintenance activity reporting, and SAP daily service entry.
 Retrieve and input planning information in SAP (4.6c) and creating work orders & PR, etc.,
 Provide planning services in support of engineering, construction and maintenance activities.
 Maintain & updates Projects weekly reports database in MS Access and produce output reports as
requested and required for information and for weekly updates.

Page :5 of 8
 Provide assistance in preparation of work packages at different stages as required for Project
Engineering & Construction Team.
 Update as-built drawings after completion of engineering and construction projects in Master copy
(Auto-Cad drawings)
 Ensures proper documentation and close out of maintenance work orders and any changes made to
maintenance procedures.
3. AL FURAT PETROLEUM COMPANY (AFPC) – Syria Sep-2006 to Mar-2008
(A joint venture of Syria Government and SHELL Petroleum Development B.V.)
(Sponsored by “Gray Mackenzie Oilfield Services” - GMOS)
This was my 2nd stint with AFPC. I worked as a Planning Engineer from September 2006 to March 2008
with 29 days ON & 28 days OFF rotation cycle in OME (Operations Maintenance& Engineering)
Department with the responsibilities of:
 Review and monitor the progress of maintenance and project schedules against plan and highlight
deviations to management through regular progress reports. (MS Project / Immpower-CMMS)
 Provide planning and scheduling support for asset and project work activities through close liaison with
the Project Engineers, Maintenance & Operations personnel.
 Provide information / advice to project managers and project teams on actions (progress, materials
&equipments) that can be taken or are necessary to achieve project goals and agreed milestones.
 Provide department input to Area shutdown planning and assist area planners for the preparation of
overall shutdown plans, ad hoc plans and other regular plans.
 Provide weekly, monthly plans and performance (KPIs) against the plan with backlog details,
forthcoming shutdown warnings with dates & shutdown jobs list to each section head & supervisor.
 Coordinate with department staff in the areas, contractors and area planners to prepare the
department integrated plans and to monitor site progress against plan.
 Prepare and issue the monthly project schedule reports, regular reports and other analytical project
support reports, when required. Detailed planning plans for project upgrades & modification works.
 Prepare & issue integrated 7-day, 14-day & 90-day plans for all sections and annual plan for
department involvement in S/D and Non-S/D related inspections of static equipment.
 Attend 14-day and 90-day planning meetings in the field and proactively include department activities
based on the Engineering completion dates and Maintenance priorities.
 Attend at area coordination, planning meetings and to provide feedback to section heads on all
Engineering and Maintenance Service contract planning issues. Prepare and issue a planning
overview of all priority activities at the meeting.
 Attend area engineering, planning meetings with contractors. Issue a weekly report on contractor’s
compliance with the department integrated plan and availability of sufficient resources to meet
planning requirements.
4. AL FURAT PETROLEUM COMPANY (AFPC) – Syria Aug-1997 to Dec-2005
(A joint venture of Syria Government and SHELL Petroleum Development B.V.)
(Sponsored by “Gray Mackenzie Oilfield Services” GMOS)
I worked as Maintenance Planning Supervisor from August 1997 to December 2005 with rotation
schedule 29 days ON & 28 days OFF at AFPC in OTS (Operations Technical Support) Department with
the responsibilities of:
 Coordinate all activities required to ensure a steady workflow through all sub-sections of the OTS
Department sections (Central Workshops, Static, Inspection, Instrumentation and Commissioning
sections) and with production departments to satisfy their requirements.
 Receiving, administration and distribution of various incoming work orders / requests, ensure requests
are clear and correctly specified, when in doubt communicate with the respective originators. Review
and issue daily maintenance schedules and verify the work orders received from different areas have
been scheduled.
 Prepare and issue 14-day, 90-day, yearly, 2-yearly plans are done using MS Project. Prepare,
compile and issue various reports, e.g. Status report, Weekly, Two weekly plans compliance report
and monthly maintenance department report, Key Performance Indicators (KPIs) report etc.
 Development and implementation of a major overhaul maintenance program for critical equipment
located throughout the Oil field, and forward planning for materials & manpower requirements for
scheduled jobs and giving field personnel an up-to date status of all ongoing work.
 Prepare planning of individual jobs by taking priorities into account, to ensure a balanced workload,
minimizing overtime requirements; after consulting with concern section supervisors. Generate, issue
and follow-up of preventive and planned maintenance plans.

Page :6 of 8
 Maintain close contacts with the Central Planning section as well as the various Area Planning
sections in order to prevent clashing during shutdown, required workshop facility usage.
 Participating in the Filed Shutdown activates like, shut down meetings, preparation of the Scope of
Work (SoW) for the planned shutdown jobs, Estimate manpower, spares / materials and equipment in
consultation with Maintenance Engineers.
 Preparing Shutdown planning and scheduling, documentation packages, preparing material take of
listing and CMMS networks for major plant shutdowns.
 Develop action plan for plant major overhaul for, planned / opportunity shutdown based on out-
standing repair and inspection works from the work orders backlog.
 Organizing periodical planning meetings and takes minutes of meetings.
 Maintains a close follow of major schemes execution, analysis progress, report deviation from the
program and proposes alternatives.
 Liaise with Materials Engineer to ensure that materials take off lists are provided and that appropriate
material requisitions are processed for all work items in the shutdown.
 Review Contractor’s work plans & schedules and any proposed changes, to prepare progress reports
and update schedules & reviews critical items.
 Set up and maintain an information system with the section’s / shop’s customers on causes for delay
of planned completion dates for their job requests.
 Maintain a reporting system enabling fast access to information on jobs at hand in the various sections
as well as historical information on work completed.
 Preparation and administration of job release documents, ensure job / equipment history has been
recorded in CMMS, originators have been informed and arrange for collection.
 Estimation of resources, including spares and materials, required for the various work requests, in
close cooperation with the various section supervisors.
 Maintain close communication with the Supplies / Purchase department on spares requirements,
indicate expected changes in consumption patterns, advise on min / max stock levels. Communicate
discrepancies on the materials required and received.
 Assist the different sections in preparation, submission, receiving and follow up on all forms of material
requests, such as MR’s, MIV’s and LPO’s. Act as a focal point for all sections / shops on material and
equipment questions from the various supply sources.
 Maintain comprehensive records of all material orders for the various sections and expedite / chase
where required. Report status on a weekly basis to section supervisors and Head of Sections.
 Ensure that the Computer Maintenance Management System (CMMS) – Immpower is fully
implemented and properly utilized in planning activities whilst taking account of field requirements.
 Participates in preparation of Capital and Operations budgets (CAPEX & OPEX) along with Budget
Controller and Section Heads.
 Development of National Planning supervisor and provides information for on-the-job- training of staff
as required.
5. QATAR GENERAL PETROLEUM CORPORATION (QGPC - Qatar) April to June 1997
(Sponsored by “Specialized Oil Services” WLL - ASAHI) 3 months shutdown
Here I worked as a Shutdown Planning Supervisor with QGPCforNGL-1, NGL-2 & MEROX Plants 3
months shutdown works during April to June 1997 with the responsibilities of:
 Registering, Monitoring and Reporting on a daily basis, the availability levels at site of Contractor
resources (Equipment, plant and category wise manpower including Sub - Contractor’s manpower)
during the mobilization period, shutdown services and post shutdown period in the form of daily reports
and histograms.
 Monitoring and Controlling the progress of work at base location and recording the progress of each
shutdown activity with delays, delay causes and corrective action proposed and “ S ” curves showing
planned Vs actual progress reports submitted on a daily basis for review by QGPC representatives
using MS Projects & Primavera-P3 and other spreadsheets.
 Inputs all the plans into Primavera-P3 and updates them and produce plans & reports for QGPC.
 Attending daily site meetings to highlight problems in the area affecting services progress and for the
earliest notification of any delay caused by QGPC or by the Contractor or his Sub - Contractors
personnel.
 Analyze site progress report of shutdown and highlight to all concerned any changes in the critical pat h
due to rescheduling of activities.

Page :7 of 8
 Collecting and inputting data to record services performed and actual times and for checking the
availability of equipment, plant and material at the site on a daily basis throughout the shutdown
period.
 Tracing the shutdown equipment information and updating on the “ Teroman ” Computerized
Maintenance Management System (CMMS).
6. NAGARJUNA FERTILIZERS AND CHEMICALS LTD., (NFCL) (India) Aug-1996 to Mar-1997
(Ammonia and Urea Expansion Project - Kakinada - India)
(Contractor by “Petron Engineering Construction Ltd.,” Mumbai - India)
I worked with M/S Petron Engineering Construction Ltd., as Site Engineer at M/S Nagarjuna
Fertilizers and Chemicals Ltd., (NFCL) Kakinada - Ammonia and Urea Expansion Project with the
responsibilities of Fabrication & Erection works of Steel structures and Erection of Heavy equipment’s /
machinery jobs supervision at the work site.
 Preparation of the “Equipment Erection Schemes” (graphs) for equipment’s to be erected at different
elevations with available Crane capacity.
 Erection of different type of equipment’s at different elevations with the different Crane capacities.
 Alignment of Equipment’s both vertically and horizontally by using plumb, theodolite, dumpy-level,
spirit-level and water level tube etc.,
 Grouting of the equipment’s after alignment with special Cements / Compounds.
 Preparation of billing for the erected equipment’s.
 Fabrication and Erection of Reformer and Heaters as per drawings supplied by the client.
7. NATIONAL METHANOL COMPANY (NMC) (Saudi Arabia) Feb-1995 to Jan-1996
(Sponsored by “Al - Yusr Townsend & Bottum Company Ltd.” - AYTB)
I worked as Area Planner in the Maintenance Department with the responsibilities:
 Planning and coordination of maintenance activities to facilitate the execution of works in accordance
with set priorities.
 Scheduling of work to enable Production and Maintenance department to perform the work best suited
to the availability of equipment from production and resources form maintenance.
 Control of work to ensure that time schedules is adhered to along with interrelated work involving other
maintenance sections.
 Daily planning, scheduling, estimation of time for the maintenance works and inputting these details in
the computer. Planning of spare parts and ordering.
 Expediting with Engineering department, Warehouse and Purchase departments for the materials.
Resource planning such as manpower and materials.
 Preparation and Implementation of Planning, Scheduling & Monitoring of Preventive maintenance,
Routine maintenance and Shutdown / Turnaround activities with Computerized Maintenance
Management System (CMMS) on HP-9000 (Hewlett Packard) and with other software like MS
Projects, MS Excel, MS Word, and other spreadsheets.
 Preparing Shutdown planning and scheduling, documentation packages, preparing material take of
listing and CMMS networks for major plant shutdowns.
 Controls the development and utilization of the computerized maintenance planning system and
collection, storage and processing of maintenance data and information.
8. KUWAIT NATIONAL PETROLEUM CO., (KNPC) (RRP - Project, Kuwait) Jul-1992 to Mar-1994
(Sponsored by “Foster Wheeler Management Operations Ltd.,” U.S.A)
I had worked in Kuwait at KNPC, Mina Al-Ahmadi Refinery as a Mechanical Engineer in Engineering
Department to rebuild / restore Kuwait’s war damaged refineries. My job responsibilities include:
 Collection of technical details from the field and archives for purchase requests (PRs) raising purposes
and repairing & overhauling purpose in the field.
 Coordinate and carry out bid evaluation statements and vendor drawing review with other disciplines
and assist technical information from KNPC.
 Review Contractor’s work progress, plans & schedules and any proposed changes may require the
critical items and highlight them to the concern person / section.
 Review the items scheduled and highlight irregularities that impact the ‘Required on the site’ date.

Page :8 of 8
 Monitor critical materials and interface with procurement coordinators and expediting to improve
delivers.
 Supervise the operation of the Project archives, maintaining the records in good order and fully
available to support the project activities.
 Collection of all maintenance history reports after repairs on each Static and Rotating equipments for
as-build documentation preparation purpose.
9. HYDERABAD ALLWYN LIMITED. (Hyderabad - India) Jan-1987 to Jun-1992
(State Government Company, Andhra Pradesh State, India)
I worked as an Assistant Manager in the Maintenance Department with the responsibilities of
Supervision on manpower and plant machinery includes:
 Maintenance and repairing of sophisticated Semi-Automatic machines operating on Pneumatic,
Hydraulic and Electrically driven Production machines based on Electronic / Computerized control
systems, Press Shop-High tonnage presses &Tool Room-High precision machines etc.,
 Supervise the Utility equipment’s in service, repair and overhauling of Pumps, Compressors, Diesel
Engines, Blowers, Air conditions etc.,
 Attending the break down machines, corrective and troubleshooting of breakdown works. Diagnose
the faults using engineering drawings and manuals etc.,
 Collecting and Analyzing equipment maintenance data to establish equipment maintenance schedules
and accuracy of the data used to establish PM’s programs for all types of equipment’s and
implementation of preventive maintenance, shutdown maintenance and routine maintenance
schedules of machinery and equipment’s.
 Supervise the Utility equipment’s in service, repair and overhauling of Pumps, Compressors, Diesel
Engines, Blowers, Air conditions etc.,
 Planning of spare parts, consumables, import substitutions & indigenousation and inventory control.
 Preparation of Engineering specification selection, technical evaluation, checking of vendor drawings /
calculations.
 Preparation of feasibility reports, sketching engineering drawings and developments, fabrication and
erection works etc.,
10. THE ANDHRA SUGARS LIMITED. Jun-1983 to Dec-1987
(Chemical & Fertilizers Division, Kovvur - India)
I worked as a Mechanical Engineer in the Maintenance Department with the responsibilities:
 Plans, Schedules and Supervises on a daily basis, the activities of assigned personnel in a safe
manner, involved in the preventive maintenance, corrective maintenance / repairs and modification of
all mechanical equipment’s.
 Directing and participating with a crew of technicians in carrying out mechanical maintenance,
overhauling, breakdown repairs of static and rotating equipment’s such as pumps, diesel engines, air
compressors, valves and other ancillary and support service mechanical related equipment’s.
 Supervise the installation, maintenance, repair and testing of stationary and rotating equipment’s in the
plant, such as pumps, compressors, blowers and heat exchangers, filters and valves etc.,
 Supervise the maintenance and repair of machineries in the workshop includes Lathes, Drilling
machines, Milling machines, Slotting machine, Planning machine, Tool & Cutter grinding machine,
Power-saws, Plate bending and Cutting machines.
 Provides solutions for technical problems and recommendations for routine maintenance and major
turnarounds on all mechanical equipment’s.
 Participate in Shutdown and Turnaround maintenance planning meetings and implementation of
preventive maintenance works, Spare parts ordering and subordinates training.

Rao Chenna-CV

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (19)

Similar to Rao Chenna-CV

Similar to Rao Chenna-CV (20)

Rao Chenna-CV