The document provides instructions for installing a sump pump system to drain water from under a home slab or in a crawl space. It describes drilling a hole in the slab, removing soil for better air flow or connecting to drain tiles, installing a suction point and sealed sump basket cover, and adding a sight hole to show the pump is functioning properly. It also recommends using a non-permeable material sealed to crawl space walls to create an air tight seal and checking air flow below the slab.

1. Drill a hole through the slab.

2. Remove soil for better air
flow or connect to drain tile.

3. Suction point into the sealed sump
basket cover. Pump continues to
function.

7. A device to show the system is
functioning properly.

11. Sump basket is sealed
and a sight hole is added.

12. Use a non-permeable
material sealed to all walls in
crawl spaces to create an
air tight seal.

15. PFE measure’s air flows below the slab to determine if proper air
flow can be achieved.