Radar speed signs
•Download as PPTX, PDF•
1 like•95 views
Radar speed signs are electronic devices that display the real-time speed of passing vehicles to make drivers aware if they exceed the speed limit using LED displays and radar sensors. They can be portable and powered by batteries or solar panels, pole-mounted and connected to external power, or mounted on trailers with external batteries or vehicle batteries. The signs are used by enforcement agencies to encourage safe driving and reduce speeding.
Report
Share
Report
Share
Recommended
Autonomous vehicles
An autonomous vehicle uses sensors like radar, LIDAR, GPS and computer vision to navigate without human input. Radar uses radio waves to determine distance, speed and track objects. LIDAR uses lasers to precisely map physical features. GPS provides maps, directions and real-time traffic data. Computer vision allows the vehicle to analyze images of the road and environment. Together these technologies allow autonomous vehicles to drive itself, potentially reducing accidents.
Bb4201362367
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Autonomous car
An autonomous car uses sensors like LIDAR, RADAR, cameras and ultrasonic sensors to navigate without human input. It has two seats and drives at the speed limit while maintaining a safe distance from other vehicles. LIDAR uses lasers to generate 3D maps of the environment while RADAR detects objects' speeds and positions using radio waves. Autonomous cars aim to minimize accidents by removing human error from driving and allow disabled people to drive. However, they have disadvantages like inability to handle heavy weather, slow speeds at intersections, high costs, and potential for system failures.
Controlling and Reducing of Speed for Vehicles Automatically By Using Rf Tech...
This document describes a system to automatically control and reduce vehicle speed using RF technology. The system uses RF transmitters mounted in areas like curves to transmit a signal when a vehicle enters that area. Receivers in the vehicle detect this signal and send it to a microcontroller which reduces the fuel flow, slowing the vehicle. This prevents accidents by reducing speed in hazardous areas. The document provides details on the system components, working, applications, advantages and conclusions.
C44091316
Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IRJET- Working of Autonomous Vehicles
This document discusses the working of autonomous vehicles. It describes how autonomous vehicles use various sensors like radar, lidar, ultrasonic sensors, wheel speed sensors, GPS, and cameras to perceive their surroundings and navigate without human input. It also discusses the processors used to make sense of the large amounts of data collected by the sensors and control the vehicle. The sensors work together to build a 3D map of the vehicle's environment to allow it to detect objects and obstacles and safely drive itself.
ADAS.pptx
The document discusses advanced driver assistance systems (ADAS) and the technologies used to enable them, including lidar, radar, stereo cameras, infrared cameras, and monocular cameras. It explains how each technology works by emitting light or radio waves and measuring their reflection to determine attributes of objects. The increasing use of automotive electronics requires design processes that balance reliability, costs, and development time. ADAS can help reduce accidents and are a key technology for autonomous vehicles.
Smartphone based ADAS
The document proposes a smartphone-based Advanced Driver Assistance System (ADAS) called smartDriver. It discusses existing ADAS apps that use smartphones or dedicated hardware. The proposed smartDriver would add features like pothole detection and augmented reality navigation to existing lane departure and collision warning systems. It outlines the system's features, advantages over existing options, required technologies (computer vision, machine learning), hardware/software needs, and a timeline for developing it in stages. Preliminary results from Simulink models demonstrate concepts like lane detection and animal detection.
Recommended
Autonomous vehicles
An autonomous vehicle uses sensors like radar, LIDAR, GPS and computer vision to navigate without human input. Radar uses radio waves to determine distance, speed and track objects. LIDAR uses lasers to precisely map physical features. GPS provides maps, directions and real-time traffic data. Computer vision allows the vehicle to analyze images of the road and environment. Together these technologies allow autonomous vehicles to drive itself, potentially reducing accidents.
Bb4201362367
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Autonomous car
An autonomous car uses sensors like LIDAR, RADAR, cameras and ultrasonic sensors to navigate without human input. It has two seats and drives at the speed limit while maintaining a safe distance from other vehicles. LIDAR uses lasers to generate 3D maps of the environment while RADAR detects objects' speeds and positions using radio waves. Autonomous cars aim to minimize accidents by removing human error from driving and allow disabled people to drive. However, they have disadvantages like inability to handle heavy weather, slow speeds at intersections, high costs, and potential for system failures.
Controlling and Reducing of Speed for Vehicles Automatically By Using Rf Tech...
This document describes a system to automatically control and reduce vehicle speed using RF technology. The system uses RF transmitters mounted in areas like curves to transmit a signal when a vehicle enters that area. Receivers in the vehicle detect this signal and send it to a microcontroller which reduces the fuel flow, slowing the vehicle. This prevents accidents by reducing speed in hazardous areas. The document provides details on the system components, working, applications, advantages and conclusions.
C44091316
Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IRJET- Working of Autonomous Vehicles
This document discusses the working of autonomous vehicles. It describes how autonomous vehicles use various sensors like radar, lidar, ultrasonic sensors, wheel speed sensors, GPS, and cameras to perceive their surroundings and navigate without human input. It also discusses the processors used to make sense of the large amounts of data collected by the sensors and control the vehicle. The sensors work together to build a 3D map of the vehicle's environment to allow it to detect objects and obstacles and safely drive itself.
ADAS.pptx
The document discusses advanced driver assistance systems (ADAS) and the technologies used to enable them, including lidar, radar, stereo cameras, infrared cameras, and monocular cameras. It explains how each technology works by emitting light or radio waves and measuring their reflection to determine attributes of objects. The increasing use of automotive electronics requires design processes that balance reliability, costs, and development time. ADAS can help reduce accidents and are a key technology for autonomous vehicles.
Smartphone based ADAS
The document proposes a smartphone-based Advanced Driver Assistance System (ADAS) called smartDriver. It discusses existing ADAS apps that use smartphones or dedicated hardware. The proposed smartDriver would add features like pothole detection and augmented reality navigation to existing lane departure and collision warning systems. It outlines the system's features, advantages over existing options, required technologies (computer vision, machine learning), hardware/software needs, and a timeline for developing it in stages. Preliminary results from Simulink models demonstrate concepts like lane detection and animal detection.
RFID based car PARKING SYSTEM
In this project “RFID based Car Parking System” we have shown the concept of an automatic car parking system. As in the modern world everything is going automatic we have built a system which will automatically sense the entry and exit of cars through the gate and then display the number of cars in the parking lot.
Check-ins and check-outs will be handled in a fast manner without having to stop the cars so that traffic jam problem will be avoided during these processes. Since there won't be any waiting during check-ins and check-outs the formation of emission gas as a result of such waiting will be avoided. Therefore, by this project we develop a parking system for an organization to have automated parking system for making best use of space, decreasing the man power and providing authentication for the vehicles from avoiding the theft.
Even we can set a maximum capacity of cars .We have developed a microcontroller which is used to sense the movement of cars and depending upon whether there is a capacity of cars to enter, it either opens the gate or not. It is also possible to open a gate when any car enters in the parking lot or close the door when a car exits from the parking lot with help of RFID.
There are two sets of sensors: one on the first gate (entry gate) and one on the second gate (exit gate). When a car arrives at the door the microcontroller receives the signal from the entry sensors and then checks whether there is a capacity of cars to be accommodated. Simultaneously it will also display the number of cars present in the parking lot on a LCD screen and also opens the gate. When a car moves out of the parking area the microcontroller reduces the count displayed accordingly and also closes the gate .The sensing of entry and exit of cars is done with the help of Infrared transmitters and receivers. Before the door the Infrared transmitter is mounted on one side and the receiver is placed directly in front of the transmitter across the door. When a car arrives the Infrared beam is blocked by the car and the receiver is devoid of Infrared rays and its output changes. This change in output is sensed by the microcontroller and accordingly it increments the count and opens the door if there is some capacity. The procedure for the exit of the cars is similar as the entry.
DRIVER LESS CAR
This document discusses automated or driverless cars. It describes how driverless cars use sensors like LIDAR and radar along with artificial intelligence, GPS, and Google Maps to navigate without human intervention. The car's AI software is connected to all sensors and controls systems like steering and brakes based on input from sensors and maps. Major companies developing driverless car technology include Google, GM, Ford, Audi, BMW, Volkswagen and Volvo. Benefits include eliminating accidents from human error, improving traffic flow, and allowing passengers to work or rest while the car drives itself.
Smart Parking system .pptx
With the vast growing influx of population in the developed, industrially and technologically sound urban cities, an urgent need to make the cities smart is surmounted. The cities are made smart utilizing data sharing, artificial intelligence, machine learning, analytics, and thousands of RFID tags and sensors. One of the significant concerns of today's smart cities is the growing need to manage the vehicles on-road as well as to create sufficient and well-managed parking lots to prevent urban areas from traffic congestion. This leads to a call for highly automated parking management system self-sufficient in guiding the driver to an available parking space in the nearby area. This project deals with the prototype of the smart parking system (S.P system). The proposed smart parking system collects the parking availability status and assists drivers in finding parking space that effectively reduces the traffic problems and mismanagement across the cities to a great extent.
Presentation automatic speed controller
This document describes an automatic speed control system for vehicles that uses an RF transmitter to set a maximum speed limit. The system aims to reduce reckless driving and accidents by limiting vehicle speed based on the location, such as near schools or in dangerous areas. It works by using RFID tags on road signs that are detected by an RF receiver in the vehicle, which then controls the vehicle speed via a microcontroller not to exceed the set limit for that area. The goal is to enhance safety by preventing excessive speeding through automated controls.
Wireless Rash Driving Detection
To develop a device that detect rash driving on highways and to alert the traffic authorities wirelessly the speed details and any speed violation and avoid accidents due to rash driving on highways. With the help of this system the speed will be calculated by a Microcontroller program and if the vehicle crosses the speed limit a buzzer sounds alerting the police both at the location and wirelessly at the control room.
Auto pilot mode/Autonomus car
This document describes the components and working of an autonomous vehicle system. It lists the major components as LADAR, RADAR, ultrasonic sensors, cameras, wheel encoders, GPS system, and a control unit. It provides details on how each component works, such as how LADAR uses lasers to measure distance and RADAR uses radio waves. The control unit receives input from all components to send commands to the vehicle and navigate safely. Potential advantages are fewer accidents and saved time, while disadvantages include higher costs and need for advanced GPS.
Automotive RADAR Adoption—An Overview
2015 D-STOP Symposium session by Ram Mirwani of AWR/National Instruments.
Get symposium details: http://ctr.utexas.edu/research/d-stop/education/annual-symposium/
Embeded in radar
This document discusses embedded systems and radar. It defines an embedded system as a combination of computer hardware and software designed for a specific function. It then defines radar as using radio detection and ranging, describing how radar works and the types of radar. It lists the common hardware and software used in radar and describes some of its features, advantages, disadvantages, operational attributes, and how it compares to lidar.
Embeded in radar
This document discusses embedded systems and radar. It defines an embedded system as a combination of computer hardware and software designed for a specific function. It then defines radar as using radio detection and ranging, describing how radar works and the types of radar. It lists the common hardware and software used in radar and describes some of its features, advantages, disadvantages, operational attributes, and how it compares to lidar.
Solar RFID tags manufacturers - POXO.pptx
Poxo RFID's exceptional range of solar-powered RFID tags. Our innovative solutions combine renewable energy and advanced tracking technology, providing seamless asset management for various industries. Trust Poxo RFID's expertise and elevate your tracking capabilities with our reliable, eco-friendly RFID tags. visit for more details: https//poxo.in/
Autonomouscar
The document provides an overview of driverless or autonomous vehicles. It discusses the history and components of these vehicles, including sensors like LIDAR, radar and cameras. The document explains how artificial intelligence analyzes sensor data to navigate autonomously. Potential advantages are reduced accidents and increased road capacity, while obstacles include handling various weather conditions and temporary construction zones. Several companies aim to release autonomous vehicle technologies between 2014 and 2020.
Radar Simulators From Digilogic Systems
Digilogic's RTES has been designed to meet the demands for a multi-functional platform where you can test and evaluate radar systems. It offers the User-friendly Scenario Generator that will help the User to simulate the complex scenario, and they do it realistically. Be it a seeker relevant to radar or surveillance, tracking, or radar, simulator is the ideal tool to figure out their performance and reliability under different circumstances.
Solar traffic signal modules used for traffic lighting
This document discusses solar traffic signal modules that use solar power and LED lights for traffic control applications. The solar panels power the lights and charge batteries, providing electricity without needing wiring or trenching. The solar traffic lights can be permanently installed on poles or temporarily used on trailers to control traffic intersections. They utilize the latest LED and electronic technologies, including solar charging, batteries, and wireless communication between linked traffic lights.
RFID Based School Children Security System
This document describes an RFID-based school children security system that aims to safely transport children to and from school. The system uses RFID tags on the children to monitor their entry and exit from the bus and sends notifications to parents. It also includes sensors to monitor the bus speed, detect if the driver has been drinking alcohol, and ensure children are not left on the bus. The system is intended to address issues where children are sometimes forgotten and not dropped off at the correct bus stop. It uses a microcontroller, GSM module, RFID reader, LCD display, proximity sensor, and alcoholic sensor. The document provides details on the hardware and software components used and concludes the system endeavors to provide safe transportation for school children
Final Senior Design Posterwork
This document discusses using LiDAR to guide a small vehicle through motion control algorithms. It will implement a SPI bus for communication between an Arduino, computer and LiDAR sensor. A solar array will also be added to promote energy efficiency. The LiDAR will scan the vehicle's surroundings in a 360 degree area to track objects. Simultaneous localization and mapping (SLAM) will be used to map stationary objects and track the vehicle's position and orientation as it moves. The project will utilize a specific Hokuyo LiDAR sensor and implement an Extended Kalman Filter to estimate and correct the vehicle's position without using GPS.
12682076.ppt
This document outlines a graduation project for a smart parking system. It describes the motivations for the project, which are to save time and reduce fuel consumption by allowing drivers to reserve parking spots remotely. The system methodology and components are explained, including Arduino, ultrasonic sensors, LCD display, RFID reader, servo motor, ESP8266 WiFi module, RGB LEDs, and a telnet application. The main components are interconnected and work together to identify reserved vehicles and direct them to their spots through color-coded LEDs and an automated gate. A SWOT analysis is provided and the document concludes with recommendations and proposals for future work.
Career Opportunities in Electric vehicles and Autonomous vehicles .pptx
The document discusses career opportunities in electrical engineering. It outlines opportunities in various industries such as automotive, electric vehicles, and autonomous vehicles. Some key roles mentioned include electric motor design, battery management systems, vehicle integration, power electronics, and software development for autonomous functions. The document provides online resources for learning more about these topics on platforms like Udemy and YouTube. It emphasizes the need for interdisciplinary skills to succeed in future roles and encourages starting to learn relevant technologies.
3PG17ME018.pptx
This presentation provides an overview of autonomous vehicles. It discusses the key hardware used in autonomous cars, including RADAR, optics like cameras, LIDAR, GPS, processors and wheel speed sensors. The hardware collects data that is processed by electronic control units and software to navigate autonomously. Potential advantages are managing traffic flow and reducing accidents, while challenges include actions like a car being switched off or hackers changing routes. The first commercially available driverless car was the Navia. In conclusion, autonomous vehicles integrated with vehicle communication systems have potential to reduce crashes and congestion.
Datacommunication presentation
The document discusses self-driving cars, including their history beginning with Google's driverless car project led by 15 engineers. It describes the vehicular hardware used such as radar, video cameras, LIDAR, GPS, and processors. The hardware collects sensor data that is processed by AI to determine how the car should accelerate, brake, and steer to safely reach the destination. While self-driving cars may provide benefits, challenges remain around handling heavy weather and differentiating objects. The document predicts autonomous vehicles could be ready for market in 4-5 years.
Smart mobility solutions
The document discusses several smart mobility solutions including:
- Advanced driver assistance systems using LiDAR, depth sensing, and vehicle data exchange platforms.
- Electric vehicles like expandable electric cars that can narrow to fit small spaces and connected folding electric scooters.
- Safety systems like cabin occupancy sensors, distracted driving prevention, and crosswalk safety alerts.
- Security solutions like automotive cybersecurity platforms, driver safety apps, and firewalls to protect connected vehicles from hacking.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
More Related Content
Similar to Radar speed signs
RFID based car PARKING SYSTEM
In this project “RFID based Car Parking System” we have shown the concept of an automatic car parking system. As in the modern world everything is going automatic we have built a system which will automatically sense the entry and exit of cars through the gate and then display the number of cars in the parking lot.
Check-ins and check-outs will be handled in a fast manner without having to stop the cars so that traffic jam problem will be avoided during these processes. Since there won't be any waiting during check-ins and check-outs the formation of emission gas as a result of such waiting will be avoided. Therefore, by this project we develop a parking system for an organization to have automated parking system for making best use of space, decreasing the man power and providing authentication for the vehicles from avoiding the theft.
Even we can set a maximum capacity of cars .We have developed a microcontroller which is used to sense the movement of cars and depending upon whether there is a capacity of cars to enter, it either opens the gate or not. It is also possible to open a gate when any car enters in the parking lot or close the door when a car exits from the parking lot with help of RFID.
There are two sets of sensors: one on the first gate (entry gate) and one on the second gate (exit gate). When a car arrives at the door the microcontroller receives the signal from the entry sensors and then checks whether there is a capacity of cars to be accommodated. Simultaneously it will also display the number of cars present in the parking lot on a LCD screen and also opens the gate. When a car moves out of the parking area the microcontroller reduces the count displayed accordingly and also closes the gate .The sensing of entry and exit of cars is done with the help of Infrared transmitters and receivers. Before the door the Infrared transmitter is mounted on one side and the receiver is placed directly in front of the transmitter across the door. When a car arrives the Infrared beam is blocked by the car and the receiver is devoid of Infrared rays and its output changes. This change in output is sensed by the microcontroller and accordingly it increments the count and opens the door if there is some capacity. The procedure for the exit of the cars is similar as the entry.
DRIVER LESS CAR
This document discusses automated or driverless cars. It describes how driverless cars use sensors like LIDAR and radar along with artificial intelligence, GPS, and Google Maps to navigate without human intervention. The car's AI software is connected to all sensors and controls systems like steering and brakes based on input from sensors and maps. Major companies developing driverless car technology include Google, GM, Ford, Audi, BMW, Volkswagen and Volvo. Benefits include eliminating accidents from human error, improving traffic flow, and allowing passengers to work or rest while the car drives itself.
Smart Parking system .pptx
With the vast growing influx of population in the developed, industrially and technologically sound urban cities, an urgent need to make the cities smart is surmounted. The cities are made smart utilizing data sharing, artificial intelligence, machine learning, analytics, and thousands of RFID tags and sensors. One of the significant concerns of today's smart cities is the growing need to manage the vehicles on-road as well as to create sufficient and well-managed parking lots to prevent urban areas from traffic congestion. This leads to a call for highly automated parking management system self-sufficient in guiding the driver to an available parking space in the nearby area. This project deals with the prototype of the smart parking system (S.P system). The proposed smart parking system collects the parking availability status and assists drivers in finding parking space that effectively reduces the traffic problems and mismanagement across the cities to a great extent.
Presentation automatic speed controller
This document describes an automatic speed control system for vehicles that uses an RF transmitter to set a maximum speed limit. The system aims to reduce reckless driving and accidents by limiting vehicle speed based on the location, such as near schools or in dangerous areas. It works by using RFID tags on road signs that are detected by an RF receiver in the vehicle, which then controls the vehicle speed via a microcontroller not to exceed the set limit for that area. The goal is to enhance safety by preventing excessive speeding through automated controls.
Wireless Rash Driving Detection
To develop a device that detect rash driving on highways and to alert the traffic authorities wirelessly the speed details and any speed violation and avoid accidents due to rash driving on highways. With the help of this system the speed will be calculated by a Microcontroller program and if the vehicle crosses the speed limit a buzzer sounds alerting the police both at the location and wirelessly at the control room.
Auto pilot mode/Autonomus car
This document describes the components and working of an autonomous vehicle system. It lists the major components as LADAR, RADAR, ultrasonic sensors, cameras, wheel encoders, GPS system, and a control unit. It provides details on how each component works, such as how LADAR uses lasers to measure distance and RADAR uses radio waves. The control unit receives input from all components to send commands to the vehicle and navigate safely. Potential advantages are fewer accidents and saved time, while disadvantages include higher costs and need for advanced GPS.
Automotive RADAR Adoption—An Overview
2015 D-STOP Symposium session by Ram Mirwani of AWR/National Instruments.
Get symposium details: http://ctr.utexas.edu/research/d-stop/education/annual-symposium/
Embeded in radar
This document discusses embedded systems and radar. It defines an embedded system as a combination of computer hardware and software designed for a specific function. It then defines radar as using radio detection and ranging, describing how radar works and the types of radar. It lists the common hardware and software used in radar and describes some of its features, advantages, disadvantages, operational attributes, and how it compares to lidar.
Embeded in radar
This document discusses embedded systems and radar. It defines an embedded system as a combination of computer hardware and software designed for a specific function. It then defines radar as using radio detection and ranging, describing how radar works and the types of radar. It lists the common hardware and software used in radar and describes some of its features, advantages, disadvantages, operational attributes, and how it compares to lidar.
Solar RFID tags manufacturers - POXO.pptx
Poxo RFID's exceptional range of solar-powered RFID tags. Our innovative solutions combine renewable energy and advanced tracking technology, providing seamless asset management for various industries. Trust Poxo RFID's expertise and elevate your tracking capabilities with our reliable, eco-friendly RFID tags. visit for more details: https//poxo.in/
Autonomouscar
The document provides an overview of driverless or autonomous vehicles. It discusses the history and components of these vehicles, including sensors like LIDAR, radar and cameras. The document explains how artificial intelligence analyzes sensor data to navigate autonomously. Potential advantages are reduced accidents and increased road capacity, while obstacles include handling various weather conditions and temporary construction zones. Several companies aim to release autonomous vehicle technologies between 2014 and 2020.
Radar Simulators From Digilogic Systems
Digilogic's RTES has been designed to meet the demands for a multi-functional platform where you can test and evaluate radar systems. It offers the User-friendly Scenario Generator that will help the User to simulate the complex scenario, and they do it realistically. Be it a seeker relevant to radar or surveillance, tracking, or radar, simulator is the ideal tool to figure out their performance and reliability under different circumstances.
Solar traffic signal modules used for traffic lighting
This document discusses solar traffic signal modules that use solar power and LED lights for traffic control applications. The solar panels power the lights and charge batteries, providing electricity without needing wiring or trenching. The solar traffic lights can be permanently installed on poles or temporarily used on trailers to control traffic intersections. They utilize the latest LED and electronic technologies, including solar charging, batteries, and wireless communication between linked traffic lights.
RFID Based School Children Security System
This document describes an RFID-based school children security system that aims to safely transport children to and from school. The system uses RFID tags on the children to monitor their entry and exit from the bus and sends notifications to parents. It also includes sensors to monitor the bus speed, detect if the driver has been drinking alcohol, and ensure children are not left on the bus. The system is intended to address issues where children are sometimes forgotten and not dropped off at the correct bus stop. It uses a microcontroller, GSM module, RFID reader, LCD display, proximity sensor, and alcoholic sensor. The document provides details on the hardware and software components used and concludes the system endeavors to provide safe transportation for school children
Final Senior Design Posterwork
This document discusses using LiDAR to guide a small vehicle through motion control algorithms. It will implement a SPI bus for communication between an Arduino, computer and LiDAR sensor. A solar array will also be added to promote energy efficiency. The LiDAR will scan the vehicle's surroundings in a 360 degree area to track objects. Simultaneous localization and mapping (SLAM) will be used to map stationary objects and track the vehicle's position and orientation as it moves. The project will utilize a specific Hokuyo LiDAR sensor and implement an Extended Kalman Filter to estimate and correct the vehicle's position without using GPS.
12682076.ppt
This document outlines a graduation project for a smart parking system. It describes the motivations for the project, which are to save time and reduce fuel consumption by allowing drivers to reserve parking spots remotely. The system methodology and components are explained, including Arduino, ultrasonic sensors, LCD display, RFID reader, servo motor, ESP8266 WiFi module, RGB LEDs, and a telnet application. The main components are interconnected and work together to identify reserved vehicles and direct them to their spots through color-coded LEDs and an automated gate. A SWOT analysis is provided and the document concludes with recommendations and proposals for future work.
Career Opportunities in Electric vehicles and Autonomous vehicles .pptx
The document discusses career opportunities in electrical engineering. It outlines opportunities in various industries such as automotive, electric vehicles, and autonomous vehicles. Some key roles mentioned include electric motor design, battery management systems, vehicle integration, power electronics, and software development for autonomous functions. The document provides online resources for learning more about these topics on platforms like Udemy and YouTube. It emphasizes the need for interdisciplinary skills to succeed in future roles and encourages starting to learn relevant technologies.
3PG17ME018.pptx
This presentation provides an overview of autonomous vehicles. It discusses the key hardware used in autonomous cars, including RADAR, optics like cameras, LIDAR, GPS, processors and wheel speed sensors. The hardware collects data that is processed by electronic control units and software to navigate autonomously. Potential advantages are managing traffic flow and reducing accidents, while challenges include actions like a car being switched off or hackers changing routes. The first commercially available driverless car was the Navia. In conclusion, autonomous vehicles integrated with vehicle communication systems have potential to reduce crashes and congestion.
Datacommunication presentation
The document discusses self-driving cars, including their history beginning with Google's driverless car project led by 15 engineers. It describes the vehicular hardware used such as radar, video cameras, LIDAR, GPS, and processors. The hardware collects sensor data that is processed by AI to determine how the car should accelerate, brake, and steer to safely reach the destination. While self-driving cars may provide benefits, challenges remain around handling heavy weather and differentiating objects. The document predicts autonomous vehicles could be ready for market in 4-5 years.
Smart mobility solutions
The document discusses several smart mobility solutions including:
- Advanced driver assistance systems using LiDAR, depth sensing, and vehicle data exchange platforms.
- Electric vehicles like expandable electric cars that can narrow to fit small spaces and connected folding electric scooters.
- Safety systems like cabin occupancy sensors, distracted driving prevention, and crosswalk safety alerts.
- Security solutions like automotive cybersecurity platforms, driver safety apps, and firewalls to protect connected vehicles from hacking.
Similar to Radar speed signs (20)
Solar traffic signal modules used for traffic lighting
Solar traffic signal modules used for traffic lighting
Career Opportunities in Electric vehicles and Autonomous vehicles .pptx
Career Opportunities in Electric vehicles and Autonomous vehicles .pptx
Recently uploaded
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
A Deep Dive into ScyllaDB's Architecture
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Demystifying Knowledge Management through Storytelling
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
Recently uploaded (20)
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
Demystifying Knowledge Management through Storytelling
Demystifying Knowledge Management through Storytelling
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
Radar speed signs
- 2. Radar Speed Signs are the electronic devices that display the dynamic speed of the vehicles in real-time. The primary aim of the Radar Speed Sign is to slow down the vehicles as they move by making the drivers aware if they cross the permissible speed limits. The interactive signs consist of a series of LEDs with a RADAR device that sends and receives the signals.
- 3. Portable Radar Speed Signs- These devices are highly portable and are powered with the help of a rechargeable battery unit. They can be installed anywhere as per the requirements of the enforcement agencies on a temporary basis.
- 4. These Radar Speed Signs are powered by a Solar panel which gives it the flexibility to be used even in those places where there is no provision for power supply. The information is shared with the help of a GPRS enabled device which is again powered by the solar panel system.
- 5. The pole mounted version is the most common version of the Radar Speed Sign. It can be found anywhere and everywhere on roads, near school buildings, places of high traffic and more. They are powered by external power and also have a wired or wireless connectivity for data transfer.
- 6. These devices have the Radar Speed Signs mounted on specially designed trailers that also have an external power source like an alkaline battery for fulfilling its power requirements. Sometimes, the power requirement of the device is fulfilled by connecting it to the battery of the vehicle to which the trailer is attached.
- 7. Photonplay Systems Pvt. Ltd. http://www.photonplayinc.com/ +1 (800) 966-9329 inquiry@photonplayinc.com