The quality inspection report summarizes measurement results for a part inspected on March 14, 2019. Key measurements included a best fit alignment analysis, cross sections, linear and radial dimension checks, and 3D comparison to a reference model. Some measurements such as linear dimension 2 were out of tolerance. Custom views and group measurements for flatness and parallelism were also reported. In summary, the report presents quantitative inspection results for part dimensions and alignments.

1. Quality Inspection Report.

2. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Reference Data - HEALED_BODY_1

3. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Measured Data - Akim_3.Leios

4. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Best Fit Alignment1
Min. -0,2579
Max. 0,2579
Avg. -0,0062
RMS 0,0985
Std. Dev. 0,0983
Var. 0,0097
+Avg. 0,0827
-Avg. -0,0749

5. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Cross Section1

6. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Name Result Name Reference Value Tolerance Actual Value Deviation
Linear Dim.2 Result Data - 1 5,6 ±0,1 5,3407 -0,2593

7. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Cross Section2

8. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Name Result Name Reference Value Tolerance Actual Value Deviation
Radial Dim.2 Result Data - 1 1 -0,5 ~ 0 1,2946 0,2946
Radial Dim.3 Result Data - 1 1 -0,5 ~ 0 1,1567 0,1567

9. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : 3D Compare1
Min. -0,4903
Max. 0,4904
Avg. -0,0025
RMS 0,1115
Std. Dev. 0,1115
Var. 0,0124
+Avg. 0,0929
-Avg. -0,079
In Tol.(%) 66,8998
Out Tol.(%) 33,1002
Over Tol.(%) 16,5885
Under Tol.(%) 16,5116

10. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Name Min. Max. Avg. RMS Std. Dev. Var. +Avg. -Avg.
3D Compare1 -0,4903 0,4904 -0,0025 0,1115 0,1115 0,0124 0,0929 -0,079

11. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Group1

12. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Name Result Name Tolerance Deviation Reference Value Actual Value
Linear Dim.1 Result Data - 1 ±0,2 -0,0231 6,85 6,8269
Linear Dim.3 Result Data - 1 ±0,075 0,0272 8,175 8,2022
Linear Dim.4 Result Data - 1 ±0,1 0,3317 113,79 114,1217
Radial Dim.1 Result Data - 1 ±0,075 -0,0238 6,175 6,1512
Name Result Name Tolerance Actual Value Bonus Tolerance
Parallelism1 Result Data - 1 0,3 0,0901 0
Parallelism2 Result Data - 1 0,3 0,1539 0
Parallelism3 Result Data - 1 0,4 0,3524 0
Parallelism4 Result Data - 1 0,4 0,6182 0
Parallelism5 Result Data - 1 0,4 0,2622 0
Parallelism6 Result Data - 1 0,4 0,4663 0
Parallelism7 Result Data - 1 0,2 2,2124 0
Parallelism8 Result Data - 1 0,4 0,022 0
Parallelism9 Result Data - 1 0,4 0,5663 0
Parallelism10 Result Data - 1 0,4 0,1114 0
Parallelism11 Result Data - 1 0,4 0,4419 0
Parallelism12 Result Data - 1 0,4 0,1297 0
Parallelism13 Result Data - 1 0,4 0,7574 0
Parallelism14 Result Data - 1 0,4 0,4945 0
Parallelism15 Result Data - 1 0,4 0,3814 0
Position1 Result Data - 1 0,3 4,1148 0
Position2 Result Data - 1 0,3 1,4627 0
Position3 Result Data - 1 0,3 1,5015 0
Position4 Result Data - 1 0,5 3,6135 0
Position5 Result Data - 1 0,5 4,0088 0
Position6 Result Data - 1 0,4 1,8587 0
Position7 Result Data - 1 0,4 1,8679 0

13. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View1

14. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View2

15. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View3

16. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View5

17. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View6

18. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View7

19. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View8

20. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View9

21. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View10

22. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View11

23. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View12

24. Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Date Mar 14, 2019
Unit mm
Department [Department]
Inspector [Inspector]
Product Name [Product Name]
Part Name [Part Name]
Result Data - 1 : Custom View13

25. Evatronix SA
Przybyly 2, 43-300 Bielsko-Biala Poland
www.evatronix.com
www.evixscan3d.com
+48 33 499 59 00 • office@evatronix.com