Publications Web of Science Scopus Stasiak-Betlejewska

Appendix 3
THE LIST OF RESPONSES TO THE CANDIDATE’S OUTCOMES
Name of Candidate: Ing. Renata Stasiak-Betlejewska, PhD.
Publications in Web of Science:
1. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata); Kaye, M (Kaye, Michael);
Dyason, M (Dyason, Marilyn); Stachova, K (Stachova, Katarina),
Edited by: Houska, M (Houska, M); Krejci I (Krejci, I); Flegl, M (Flegl, M)
Title: STUDENTS' EXPECTATIONS IN THE TECHNICAL UNIVERSITY SERVICES
QUALITY ASSESSMENT
Source: EFFICIENCY AND RESPONSIBILITY IN EDUCATION 2014
Pages: 767-774
Published: 2014
Conference Title: 11th International Conference on Efficiency and Responsibility in
Education
Conference Date: JUN 05-06, 2014
Conference Location: Prague, CZECH REPUBLIC
Sponsor(s): Czech Univ Life Sci, Fac Econ & Management
Times Cited in BIOSIS Citation Index: 0
Times Cited in Chinese Science Citation Database: 0
Times Cited in Russian Science Citation Index: 0
Times Cited in SciELO Citation Index: 0
Times Cited in Web of Science Core Collection: 0
Total Times Cited: 0
ISBN: 978-80-213-2468-8
Accession Number: WOS:000351960900101
2. Grzegorzewska, E (Grzegorzewska, Emilia); Stasiak-Betlejewska, R (Stasiak-
Betlejewska, Renata)
Title: The Influence of Global Crisis on Financial Liquidity and Changes in Corporate Debt
of the Furniture Sector in Poland
Source: DRVNA INDUSTRIJA
Volume: 65
Issue: 4
Pages: 315-322
DOI: 10.5552/drind.2014.1342
Published: 2014
ISSN: 0012-6772

eISSN: 1847-1153
3. Borkowski, S (Borkowski, Stanislaw); Stasiak-Betlejewska, R (Stasiak-Betlejewska,
Renata)
Edited by: Supin, HCM (Supin, HCM); Palus, H (Palus, H)
Title: THE CONCEPT OF SOCIAL RESPONSIBILITY IN THE WOODWORKING AND
FURNITURE INDUSTRY AS A RESPONSE TO THE GREEN ECONOMY NEEDS
Source: POSITION AND ROLE OF THE FOREST BASED SECTOR IN THE GREEN
ECONOMY: PROCEEDINGS OF SCIENTIFIC PAPERS
Pages: 18-23
Published: 2014
Conference Title: 7th International Scientific Conference on Position and Role of the Forest
Based Sector in the Green Economy
Conference Date: MAY 21-23, 2014
Conference Location: Tech Univ Zvolen, Zvolen, SLOVAKIA
Conference Host: Tech Univ Zvolen
ISBN: 978-953-57822-1-6
4. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata)
Edited by: Supin, HCM (Supin, HCM); Palus, H (Palus, H)
Title: FOREST PROMOTIONAL COMPLEX AS A PROMOTION TOOL FOR THE
SUSTAINABLE FOREST ECONOMY MANAGEMENT
Source: POSITION AND ROLE OF THE FOREST BASED SECTOR IN THE GREEN
ECONOMY: PROCEEDINGS OF SCIENTIFIC PAPERS
Pages: 147-152
Published: 2014
Conference Title: 7th International Scientific Conference on Position and Role of the Forest
Based Sector in the Green Economy
Conference Date: MAY 21-23, 2014
Conference Location: Tech Univ Zvolen, Zvolen, SLOVAKIA
Conference Host: Tech Univ Zvolen
ISBN: 978-953-57822-1-6

5. Sujanova, J (Sujanova, Jana); Gabris, P (Gabris, Peter); Licko, M (Licko, Miroslav);
Pavlenda, P (Pavlenda, Pavel); Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata)
Edited by: Cegarra, JG (Cegarra, JG)
Title: Aspects of Knowledge Management in Slovak Industrial Enterprises
Source: PROCEEDINGS OF THE 13TH EUROPEAN CONFERENCE ON KNOWLEDGE
MANAGEMENT, VOLS 1 AND 2
Pages: 1135-1144
Published: 2012
Conference Title: 13th European Conference on Knowledge Management (ECKM)
Conference Date: SEP 06-07, 2012
Conference Location: Univ Politecnica Cartagena, SPAIN
Conference Host: Univ Politecnica Cartagena
ISBN: 978-1-908272-64-5
6. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata); Borkowski, S (Borkowski,
Stanislaw)
Edited by: Rybansky, R (Rybansky, R); Novakova, R (Novakova, R)
Title: CLUSTER AS AN ELEMENT SUPPORTING PASSIVE WOODEN BUILDING
DEVELOPMENT
Source: WOOD AND FURNITURE INDUSTRY IN TIMES OF CHANGE - NEW
TRENDS AND CHALLENGES
Pages: 97-107
Published: 2012
Conference Title: 5th International Conference on Wood and Furniture Industry in Times of
Change - New trends and challenges (WoodEMA)
Conference Location: Trnava, SLOVAKIA
Sponsor(s): Univ Ss Cyril & Methodius; Univ Ss Cyril & Methodius, Rector; Fac Mass
Media Commun, Dean
ISBN: 978-80-8105-374-0

7. Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata)
Edited by: Rybansky, R (Rybansky, R); Novakova, R (Novakova, R)
Title: EFFECTS OF PASSIVE HOUSE PROMOTING IN EUROPE
Source: WOOD AND FURNITURE INDUSTRY IN TIMES OF CHANGE - NEW
TRENDS AND CHALLENGES
Pages: 108-117
Published: 2012
Sponsor(s): Univ Ss Cyril & Methodius; Univ Ss Cyril & Methodius, Rector; Fac Mass
Media Commun, Dean
ISBN: 978-80-8105-374-0
8. Borkowski, S (Borkowski, Stanislaw); Stasiak-Betlejewska, R (Stasiak-Betlejewska,
Renata)
Edited by: Palus, H (Palus, H)
Title: ANALYSIS OF BENT FURNITURE PRODUCTION COSTS
Source: WOOD PROCESSING AND FURNITURE MANUFACTURING: PRESENT
CONDITIONS, OPPORTUNITIES AND NEW CHALLENGES
Pages: 109-115
Published: 2010
Conference Title: 3rd WoodEMA International Scientific Conference on Wood Processing
and Furniture Manufacturing - Present Conditions, Opportunities and New Challenges
Conference Date: OCT 06-08, 2010
Conference Location: Vyhne, SLOVAKIA
Sponsor(s): WoodEMA, i a
ISBN: 978-80-228-2160-5

Publications in Scopus:
1. Borkowski, K. S., Stasiak-Betlejewska, K. R., & Náprstková, N. (2011). The kaizen
philosophy in the aluminium products improvement. Manufacturing Technology, 11,
2-5. Retrieved from www.scopus.com
2. Borkowski, S., Stasiak-Betlejewska, R., & Torok, A. (2013). Theoretical investigation
of supply chain service level in hungary and poland. Transport and
Telecommunication, 14(2), 93-101. doi:10.2478/ttj-2013-0008
3. Czajkowska, A., & Stasiak-Betlejewska, R. (2015). Quality management tools
applying in the strategy of logistics services quality improvement. Serbian Journal of
Management, 10(2), 225-234. doi:10.5937/sjm10-8095
4. Czajkowska, A., Stasiak-Betlejewska, R., & Borade, A. B. (2015). Analysis of quality
control results in the lift truck elements production. Periodica Polytechnica
Transportation Engineering, 43(3), 168-171. doi:10.3311/PPtr.7962
5. Deshmukh, S. J., Stasiak-Betlejewska, R., Ingole, S., & Bhuyar, L. (2014). DSS for
rural domestic energy planning - case study of a block in central india. International
Journal of Energy Sector Management, 8(1), 27-55. doi:10.1108/IJESM-06-2013-
0007
6. Grladinović, T., Perić, I., Stasiak-Betlejewska, R., & Škoda, P. (2013). Increasing the
productivity of enterprises with the 20 keys method. Paper presented at the 24th
International Scientific Conference: Wood is Good - User Oriented Material,
Technology and Design, Proceedings, 35-40. Retrieved from www.scopus.com
7. Grzegorzewska, E., & Stasiak-Betlejewska, R. (2015). The influence of global crisis
on financial liquidity and changes in corporate debt of the furniture sector in poland.
[Utjecaj svjetske krize na financijsku likvidnost i promjene u dugovanjima korporacija
u sektoru proizvodnje namještaja u Poljskoj] Drvna Industrija, 65(4), 315-322.
doi:10.5552/drind.2014.1342
8. Perić, I., Grladinović, T., Starčević, I., & Stasiak-Betlejewska, R. (2013). On
enhancing of production planning in wood processing and furniture manufacturing.
Paper presented at the 24th International Scientific Conference: Wood is Good - User
Oriented Material, Technology and Design, Proceedings, 119-125. Retrieved
from www.scopus.com
9. Stacho, Z., & Stasiak-Betlejewska, R. (2014). Approach of organisations operating in
slovakia to employee's performance evaluation. Economic Annals-XXI, 5-6, 82-85.
Retrieved from www.scopus.com
10. Stasiak-Betlejewska, R. (2015). Construction product quality improvement with
applying production problems analysis. Manufacturing Technology, 15(5), 756-761.
11. Stasiak-Betlejewska, R. (2013). Constructions of the energy-saving wooden houses
and its advantages on the example of polish construction. Paper presented at the 24th
International Scientific Conference: Wood is Good - User Oriented Material,
Technology and Design, Proceedings, 143-150. Retrieved from www.scopus.com
12. Stasiak-Betlejewska, R. (2015). Value engineering application in the american
transportation industry. Periodica Polytechnica Transportation Engineering, 43(4),
206-210. doi:10.3311/PPtr.8448
13. Stasiak-Betlejewska, R. (2012). Value engineering as the way of quality problems
solving in the steel construction management. Manufacturing Technology, 12(13)
14. Stasiak-Betlejewska, R., & Borkowski, S. (2014). The machines operation
effectiveness in the furniture production in the context of toyota production system
applying. Paper presented at the 25th International Scientific Conference: New

Materials and Technologies in the Function of Wooden Products, Proceedings, 113-
119. Retrieved from www.scopus.com
15. Sujanova, J., Gabris, P., Licko, M., Pavlenda, P., & Stasiak-Betlejewska, R. (2012).
Aspects of knowledge management in slovak industrial enterprises. Paper presented at
the Proceedings of the European Conference on Knowledge Management, ECKM, ,
2 1135-1144. Retrieved from www.scopus.com
A. List of works cited in publications by other authors listed in SCI, SSCI
Work cited no. 1 (unabridged quotation including the IF):
2) (unabridged quotation including the IF)
Responses: 1) (unabridged quotation including the IF)
2) (unabridged quotation including the IF)
Work citated no. 1
Title: CLUSTER AS AN ELEMENT SUPPORTING PASSIVE WOODEN BUILDING
DEVELOPMENT
Author(s): Stasiak-Betlejewska, R (Stasiak-Betlejewska, Renata); Borkowski, S (Borkowski,
Stanislaw)
Edited by: Rybansky R; Novakova R
Source: WOOD AND FURNITURE INDUSTRY IN TIMES OF CHANGE - NEW TRENDS
AND CHALLENGES Pages: 97-107 Published: 2012
Times Cited in Web of Science: 1
Cited Reference Count: 8
Abstract: Cluster is effective element which can support innovative activity realized on
analyzed region. Cluster is also an example of promoting different companies' network acting
for sharing knowledge among enterprises acting in the same branch. An article shows cluster's
idea concerning wooden and passive building realized in polish conditions.
Language: English
Document Type: Proceedings Paper
Conference Sponsors: Univ Ss Cyril & Methodius, Univ Ss Cyril & Methodius, Rector, Fac
Mass Media Commun, Dean
Author Keywords: region; cluster; competition; enterprise
Addresses: [Stasiak-Betlejewska, Renata; Borkowski, Stanislaw] Czestochowa Tech Univ,
Fac Management, Inst Prod Engn, PL-42201 Czestochowa, Poland.
Reprint Address:
E-mail Addresses: renatastasiak@wp.pl
Publisher: UNIV SS CYRIL & METHODIUS TRNAVA-UCM TRNAVA
Publisher Address: FAC MASS MEDIA COMMUNICATION, NAM J HERDU 2 917 01,

TRNAVA, SLOVAK REPUBLIC 2012, SLOVAKIA
Web of Science Categories: Business; Management
Research Areas: Business & Economics
IDS Number: BDJ64
ISBN: 978-80-8105-374-0
Source Item Page Count: 11
By: Greger, K (Greger, Kresimir); Segotic, K (Segotic, Ksenija); Grladinovic, T (Grladinovic,
Tomislav); Blcanic, K (Bicanic, Kristina); Peric, I (Peric, Ivana)
Title: CRITERIA RANKING IN ASSESSING TECHNOLOGICAL PROCESS
CAPABILITY IN FURNITURE MANUFACTURING
Source: SUMARSKI LIST
Volume: 137
Issue: 5-6
Pages: 279-285
Published: 2013
Abstract: Today's trend of world market globalization, competition and ever greater demands
of customers have highlighted the quality of products and services as the key factor in
conquering the market. It all impacts wood processing and furniture manufacturing in the
Republic of Croatia due to its constant orientation to export as the only way of achieving
market competitiveness.
Research polygons were two factories of board furniture. Relevant data for considered
products were gathered over 1.5 years, and then processed to determine factors with strongest
influence on the process capability of each polygon. The criteria for determining
technological processes capability were selected using Analytic Hierarchy Process (AHP)
method. Research has shown that the most influencing criteria on technological process
capability are human, material and machine. Based on obtained results, this paper is a
contribution to the discussion on traditional and modern quality assurance models, and
represents scientific grounds for implementing a suitable stability and capability model.
Times Cited in Web of Science: 0
ISSN: 0373-1332
Work citated no. 2
Title: Aspects of knowledge management in Slovak industrial enterprises
(2012) Proceedings of the European Conference on Knowledge Management,
ECKM, 2, pp. 1135-1144. Cited 4 times.
Authors: Sujanova, J.a
, Gabris, P.a
, Licko, M.a
, Pavlenda, P.a
, Stasiak-Betlejewska, R.b
a
Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in
Bratislava, Trnava, Slovakia
b
Faculty of Management, Czestochowa University of Technology, Czestochowa, Poland

Abstract: The article deals with the different aspects of the knowledge management. The first
part of the article is the analysis of the knowledge management on the governmental level -
specifically the Slovak Republic knowledge economy strategy Minerva 2.0. It is focused on
the impact of this strategy on the four main areas: innovations, human resources, research and
development and information and communication technologies with the emphasis on the
industrial enterprises. As a source for the analysis have been used data from the Statistical
Office of the Slovak Republic and EU surveys and reports like: Innovation Union Scoreboard
2011, The Global Information Technology Report 2012, Innovation Union Competitiveness
report 2011 and others. The results of the analysis brought up several problem areas:
financing of the research and development, integration of the Slovak research and
development in the EU research area, disproportion between the number of the technical
sciences and theory graduates and industrial enterprises demands, participation and in EU
research programmes like FP7. Second part of the article pay attention to the knowledge
management maturity level in Slovak industrial enterprises. The assessment was oriented on
the culture, structure and technologies. For those areas was designed the questionnaire for the
qualitative research of the knowledge management maturity in Slovak industrial enterprises.
The article contains selected questions oriented on the knowledge strategy implementation, C
level management participation in the knowledge management strategy implementation,
orientation of the innovation activities, knowledge areas and organizational culture
orientation. Results of the knowledge management maturity level in Slovak industrial
enterprises does not allowed us to define correlations between the selected knowledge
management areas. The main conclusion from the presented analyse is the disparity between
the strategy and its implementation. There is not a clear direction between the knowledge
strategy, knowledge areas, innovation activities and organizational culture. The knowledge
management implementation in industrial enterprises does not have stable pillars to support
the incorporation of the knowledge management process into the business process.
Author Keywords
Industrial enterprises; Innovation; Knowledge economy; Knowledge management maturity;
Knowledge strategy; Organizational culture
Index Keywords
Business Process, Global information technology, Industrial enterprise, Information and
Communication Technologies, Innovation activity, Knowledge areas, Knowledge
economy, Knowledge management strategy, Knowledge strategy, Level
management, Maturity levels, Organizational cultures, Problem areas, Qualitative
research, Research and development, Research programmes, Slovak Republic, Statistical
Offices, Technical science; Competition, Information technology, Innovation, Knowledge
management, Research, Surveys; Management science
Conference name: 13th European Conference on Knowledge Management, ECKM 2012
Conference date: 6 September 2012 through 7 September 2012
Conference location: Cartagena
Conference code: 94375
ISSN: 20488963
ISBN: 9781908272638
Language of Original Document: English
Abbreviated Source Title: Proc. Eur. Conf. Knowl. Manage., ECKM
Document Type: Conference Paper
Source: Scopus

Relich, M.a
, Witkowski, K.a
, Saniuk, S.a
, Šujanová, J.b
Material demand forecasting: An ERP system perspective
(2014) Applied Mechanics and Materials, 527, pp. 311-314.
a
University of Zielona Góra, Poland
b
Slovak University of Technology in Bratislava, Institute of Industrial Engineering,
Management and Quality, Slovakia
Abstract
This paper investigates various problems associated with the parameter specification for
material requirements planning (MRP) in a typical ERP system. The choice of a suitable MRP
procedure and its parameters can reduce excessive quantities of materials and, consequently,
cost. The proposed approach is dedicated for MRP procedure based on the forecasting of
material demand and inventory that can be obtained with the use of techniques for nonlinear
function identification, such as fuzzy-neural system and neural networks. An example is
presented which compares the different forecasting models for material demand and
inventory. © (2014) Trans Tech Publications, Switzerland.
Author Keywords
Inventory management; Logistics; Lot size; Material requirements planning
Source: Scopus
Relich, M.
Knowledge acquisition for new product development with the use of an ERP database
(2013) 2013 Federated Conference on Computer Science and Information Systems, FedCSIS
2013, art. no. 6644180, pp. 1285-1290. Cited 1 time.
University of Zielona Gora, ul. Licealna 9, 65-216 Zielona Gora, Poland
Abstract
Nowadays, a considerable number of enterprises develop new products using an Enterprise
Resource Planning (ERP) system. One of the modules of a typical ERP system concerns
project management. Functionalities of this module consist of defining resources, company
calendars, sequence of project tasks, task duration etc. in order to obtain a project schedule.
These parameters can be defined by the employees according to their knowledge, or they can
be connected with data from previous completed projects. The paper investigates using an
ERP database to identify critical factors, i.e. variables that significantly influence on new
product development. Project duration and cost is estimated by a fuzzy neural system that
uses data of completed projects stored in an ERP system. © 2013 Polish Information
Processing Society.
Source: Scopus
Stacho, Z.a
, Urbancová, H.b
, Stachová, K.a
Organisational arrangement of human resources management in organisations operating in
Slovakia and Czech Republic
(2013) Acta Universitatis Agriculturae et Silviculturae Mendelianae
Brunensis, 61 (7), pp. 2787-2799.
a
School of Economics and Management in Public Administration in Bratislava, Department
of Management, Furdekova 16, 851 04 Bratislava, Slovakia

b
Faculty of Economics and Management, Czech University of Life Sciences Prague,
Kamycka 129, 165 21 Praha 6-Suchdol, Czech Republic
Abstract
A necessary condition of effective functioning of human resources management in an
organisation is the creation of adequate organisational conditions including the existence of a
human resources management department, its size, composition and responsibility, which are
formed following particular conditions of the given organisation. Competitive environment of
organisations operating in Slovakia and Czech Republic is growing with the process of world
economy globalisation, and it brings the need of flexibility in management, and therefore we
have to get used to changes also in the sphere of human resources management, and learn to
cope with new impulses and situations. At present, that predominantly includes spreading
effects of global financial and economic crisis, influencing all spheres of life in Slovakia and
in Czech Republic too. Handling this situation presupposes flexibility in assessment of
changes in environment where organisations operate, ability to detect all positive as well as
negative impacts and situations, and formulation of measures to enhance their own position
sensibly and cautiously. Due to the need of focusing of organisations on comprehensive
arrangement of human resources management, in questionnaire researches, we focused on
finding out whether and to what extent organisations operating in Slovakia (n = 340) and in
Czech Republic (n = 109) focus on human resources management arrangement. The objective
of the article is to compare results in the sphere of human resources in organisations operating
in Slovak and Czech Republics. The results show that 67% organisations in Slovakia and only
43% in the Czech Republic had a human resources management department which realised
followed human resources management functions and personnel strategy.
Author Keywords
Functional strategies; Human resources management; Human resources management
departments; Organisational strategy; Organisations operating in Slovakia; Outsourcing of
personnel activities
Document Type: Article
Source: Scopus
Work citated no.3
Stasiak-Betlejewska, R.
Value engineering as the way of quality problems solving in the steel construction
management
(2012) Manufacturing Technology, 12 (13), . Cited 2 times.
Institute of Production Engineering, Czestochowa University of Technology, Al. Armii
Krajowej 19B, 42-200 Czȩstochowa, Poland
Abstract
The study aim was discussion on the steel construction production with regard to quality
problems and its analysis by using value engineering. The most important elements of the
work should, however, discuss how an important factor for the company's production and
quality management are. Based on this explicit purpose developed the following hypothesis:
identification of the nonconformities location in the production process of steel constructions
and its causes contributes to the production improvement. The research result is identification
of nonconformities formation areas and presentation of the production process improvement
methodology by applying of quality tools and value engineering idea as well. The research
object was chosen company producing steel constructions for buildings. The examination
research findings come from 2011 year.
Author Keywords
Production management; Quality; Steel construction; Value engineering

Source: Scopus
Dian, M. The methodology of quality matrix in manufacturing quality process improvement
(2013) Manufacturing Technology, 13 (4), pp. 431-437.
Faculty of Technology and Production Management, University of J. E. Purkyne in Usti nad
Labem, Na Okraji 1000, 40096 Usti nad Labem, Czech Republic
Abstract
In each industrial entrepreneur organization around the globe a three dimensional objective
well known under the abbreviation QCD (Quality, Costs, and Delivery) is examined, pursued,
and evaluated on daily basis. The nowadays crucial philosophy pertaining to process
improvement in terms of quality assurance and significant cost reduction is that: "The quality
must be manufactured and not controlled up". In order to be successful on the market place it
is necessary to orchestrate, implement and carry out an advanced production quality assurance
system with appropriate tools of course accompanying with previously precisely organized
prototype and preserial stages of production. The article deals with a proposal of adequate
methodology and the experimental implementation of quality matrix into manufacturing
process assurance in order to improve a quality level and the whole QCD.© 2013 Published
by Manufacturing Technology.
Author Keywords
Process improvement; Quality assurance; Quality matrix; Quality tools
Source: Scopus
Polach, P. Utilization of multibody simulations at the trolleybus development
(2013) Manufacturing Technology, 13 (4), pp. 515-520.
Section of Materials and Mechanical Engineering Research, Research and Testing Institute
Pilsen, Czech Republic
Abstract
šKODA VÝZKUM s.r.o. (now VÝzkumnÝ a zkušebnÍ ústav Plzeň s.r.o.) cooperated on the
development of the NEOPLAN DMA low-floor articulated trolleybus intended for the Boston
city (the United States). Multibody modelsand finite element models of the trolleybus were
utilized in the stage of the vehicle design. The multibody modelsof the trolleybus were created
in the Alaska simulation tool and the simulations (running over a large road unevenness,start,
braking and driving through a bend) were aimed at determining forces acting in the
trolleybussuspension elements and radius rods. Time histories of the forces calculated using
multibody models were used asthe input data of the trolleybus finite element models.
Utilizing the finite element models the critical places of thetrolleybus body structure from the
point of view of high stresses were determined. At the measurement with thereal trolleybus
prototype these places were provided with strain gauges. © 2013 Published by Manufacturing
Technology.
Author Keywords
Constructional design; Dynamics; Multibody model; Trolleybus
Source: Scopus

Work citated no.4
Borkowski, K.S.a
, Stasiak-Betlejewska, K.R.a
, Náprstková, N.b
The Kaizen philosophy in the aluminium products improvement
(2011) Manufacturing Technology, 11, pp. 2-5. Cited 4 times.
a
Institute of Production Engineering, Czestochowa University of Technology, Al. Armii
Krajowej 19 B, 42-200 Czestochowa, Poland
b
Institute of Technology and Production Management, Jane Evangelista Purkyne University
in Ústí nad Labem, Pateurova 7, 400 01 Ústí nad Labem, Czech Republic
Abstract
Kaizen strategy is the most important Japanese management concept. Supporters of this by all
means an interesting management philosophy consider it as a basis for achieving success by
the company. The analyzed company X Stainless motivated by others companies market
successes decided to deepen the knowledge of the Kaizen philosophy, which resulted in the
implementation of this method of management in its ranks. The essence of Kaizen is to
change ways of thinking and way of production management. Underlying this theory, there is
the gradual but constant improvement of the status quo with the active involvement of every
management employee and the rest of the company workers. Kaizen educates employees
towards finding ways to better perform their duties. Performance of work is closely connected
with the observance of standards and the introduction of small improvements in order to
continue its improvement.
Author Keywords
Improvement; Kaizen; Quality
Source: Scopus
Nová, I., Machuta, J.
Squeeze casting results of aluminium alloys
(2013) Manufacturing Technology, 13 (1), pp. 73-79. Cited 4 times.
Faculty of Mechanical Engineering, Department of Engineering Technology, Technical
University of Liberec, Czech Republic
Abstract
The paper deals with a squeeze casting process. This process added a new knowledge in to
research in the branch by crystallization of aluminium alloys. Due to this purpose there was
designed a special tool, which was placed on hydraulic press. The squeeze casting was carried
out on an aluminium alloy (AlSi12, with 12 % silicon). The main aim was study of the
aluminium alloy structure, which was established at a pressure of crystallizing melt. In this
way of the material crystallization was produced a truncated cone part with the larger the base
(ø 100 mm × 105 mm). The structure of specimens was monitored on a light microscope and
was evaluated by means of software NIS Elements. The main results of the pressure melt to
fine crystalline structure, which is represented fine dendrites both on surface and in an interior
parts of the processed material. The influence of this pressure on the mechanical properties
was monitored too. © 2013 Published by Manufacturing Technology.
Author Keywords
Alloy AlSi12; Crystallization; Pressure; Structure
Source: Scopus

Greger, K., Šegotić, K., Grladinović, T., Bičanić, K., Perić, I.
Criteria ranking in assessing technological process capability in furniture manufacturing
[Rangiranje kriterija pri utvrdivanju sposobnosti tehnološkog procesa u proizvodnji
namještaja] (2013) Sumarski List, 137 (5-6), pp. 279-285.
Šumarski Fakultet Sveučilišta u Zagrebu, Svetošimunska 25, 10002 Zagreb, Croatia
Abstract
Today's trend of world market globalization, competition and ever greater demands of
customers have highlighted the quality of products and services as the key factor in
conquering the market. It all impacts wood processing and furniture manufacturing in the
Republic of Croatia due to its constant orientation to export as the only way of achieving
market competitiveness. Research polygons were two factories of board furniture. Relevant
data for considered products were gathered over 1.5 years, and then processed to determine
factors with strongest influence on the process capability of each polygon. The criteria for
determining technological processes capability were selected using Analytic Hierarchy
Process (AHP) method. Research has shown that the most influencing criteria on
technological process capability are human, material and machine. Based on obtained results,
this paper is a contribution to the discussion on traditional and modern quality assurance
models, and represents scientific grounds for implementing a suitable stability and capability
model.
Author Keywords
AHP method; Furniture manufacturing; Quality; Technological process capability and
stability
Source: Scopus
Michna, Š., Náprstková, N.
The use of fractography in the analysis of cracking after formed workpiece blank mechanical
machining from the ALCuSnBi alloy
(2012) Manufacturing Technology, 12 (13), .
Faculty of Production Technology and Mamagement, Department of Technology and
Material Engineering, Jan Evangelista Purkyně University in Ústí nad Labem, Na Okraji
1001, 400 01 Ústí nad Labem, Czech Republic
Abstract
The aim of the performed works was research on the causes of formed aluminum blanks
cracking in the range of the AlCuSnBi alloy rods where cracks appear during mechanical
machining (turning, drilling) of this range to the final part. AlCuSnBi alloy was invented as a
substitute for aluminum machining alloys Al - Cu type alloyed with lead. For the alloy were
performed qualitative and quantitative fractographic analysis of the fracture surface after
machining in order to determine possible causes cracking of the material and thus his lack of
strength during machining. Part of this paper is to the overall theoretical analysis of the issue.
This paper clearly documents that fractographic analysis methods can significantly and to the
extent required to provide answers to the causes of insufficient material strength during
machining. Also points out the possible causes of cracks in this alloy during machining and
ways to eliminate them.
Author Keywords
AlCuSnBi alloy; EDX analysis; Fractographic analysis; Machining
Source: Scopus

B. List of works cited in publications by other authors not listed in SCI, SSCI
Stasiak-Betlejewska, R., Borkowski, S., (2009) Controlling w odniesieniu do systemu
produkcyjnego. [In:] Cele i uwarunkowania funkcjonowania współczesnych przedsiębiorstw.
Red.nauk. Janusz Dworak, Tadeusz Falencikowski. Wyd.Wyż.Szk.Bank. Gdańsk. p.77-90
ISBN 978-83-61712-12-1
Responses:
Prístavka, M., Bujna, M., Korenko, M., Reliability monitoring of grain harvester in operating
conditions [Sledovanie spol'ahlivosti obilného kombajnu v prevádzkových podmienkach]
(2013) Journal of Central European Agriculture, 14 (4), pp. 1436-1443.
Stasiak-Betlejewska, R., Borkowski, S., Stability of the quality of pipes of the seam
(2007) Quality Materials Improvement, EDIS Publishing company, University of Żilina,
Żilina, Slovakia,. ISBN 978 - 80 - 8070742-2
Responses:
1) Naprstkova, N., Michna, S., Identification and evaluation of machining product defects in
teaching of students at college, (2013) Engineering for Rural Development, pp. 569-572.
Stasiak-Betlejewska, R., Borkowski, S.,Assessment of the CNC Machine Modernity Basing
on the ABC Technology Method (2009) W:TRANSCOM 2009. 8-th European Conference of
Young Research and Scientific Workers. Proceedings. Section 2. Economics and
Management., pp. 19-22. Żilina: University of Îilina, ISBN 978-80-554-0041
Responses:
Vetráková, M.a
, Potkány, M.b
, Hitka, M.b
, Outsourcing of facility management [Outsourcing
facility managementu] (2013) E a M: Ekonomie a Management, 16 (1), pp. 80-92.
Borkowski, S., Stasiak-Betlejewska, R., Analysis of anti-corrosion coating process on steel
constructions, (2010) Manufacturing technology, 10, pp. 27-29. ISSN1213-2489
Responses:
Kuśmierczak, S., Svobodová, J., Microscopic Evaluation of Protective Coating by Coated
Sheets after Corrosion Load, (2012) Manufacturing Technology, 12 (13).
Selejdak, J., Stasiak-Betlejewska, R., Determinants of quality of printing on foil (2007) J.
Machine Eng., 7 (2), pp. 111-117
Responses:
Horváth, E.a
, Hénap, G.b
, Török, A.c
, Harsányi, G.a
, Mechanical characterization of glass-
ceramics substrate with embedded microstructure (2012) Journal of Materials Science:
Materials in Electronics, 23 (12), pp. 2123-2129.

Stasiak-Betlejewska, R., Borkowski, S., Contemporary Developmental Orientations in the
Production on the Example of the Furniture Branch (2007) Nove Trendy V Manazerstve
Kvality, pp. 18-22.
3 rocnik medzinarodnoho seminara pedagogov studijneho programu Kvalita produkcie.
Zbornik prednasok. Trnava
Responses:
Jelačić, D.a
, Oblak, L.b
, Petrović, S.c
, Moro, M.a
, Barčić, A.P.a
, Ćošić, V.d
, Meloska, Ž.e
Wood sector media promotion in some South-East European countries [Medijska promocija
drvnog sektora u nekim zemljama jugoistočne europe] (2012) Drvna
Industrija, 63 (3), pp. 195-203.
Borkowski, S., Stasiak-Betlejewska, R., Analysis of Bent Furniture Production Costs
(2010) Wood Processing and Furniture Manufacturing: Present Conditions, Opportunities
and New Challenges, pp. 109-115. Vyhne
Responses:
Potkány, M.a
, Hajduková, A.a
, Teplická, K.b
Target costing calculation in the woodworking
industry to support demand at a time of global recession [Ukierunkowane kosztorysowanie w
przemyśle drzewnym w celu wsparcia popytu w okresie światowej recesji]
(2012) Drewno, 187, pp. 89-104.
Stasiak-Betlejewska, R., Borkowski, S., The Role of a Foreign Capital in a Process of the
Computerization of the Polish Bank Sector (2007) Ekonomika: Problemi teorii ta
praktiki, pp. 1749-1759. [In:] Zbornik naukovich prac'. Vip. 231. T. IX. Dnipropetrovs'k:
Wyd. DNU 2007
Responses:
Merková, M.a
, Drábek, J.b
, Jelačić, D.c
, Determinants of effects of foreign direct investment
in terms of Slovak Republic and wood-processing industry of Slovakia [Odrednice
učinkovitosti izravnih stranih ulaganja u uvjetima poslovanja Republike Slovačke i slovačke
drvoprerad{stroke}ivačke industrije] (2012) Drvna Industrija, 63 (2), pp. 129-142.
Borkowski, S., Stasiak-Betlejewska, R., Náprstková, N., The importace assessment of the
control and the standardization in the furniture production (2010) Strojírenská
Technologie, 14, p. 25. FVTM UJEP Ústí nad Labem
Responses:
Muller, M. Polymeric composites based on AL 2O 3 reinforcing particles (2011) Engineering
for Rural Development, pp. 423-427.
Work cited no.10 (unabridged quotation including the IF):
Stasiak-Betlejewska, R., Borkowski, S., An Analysis of Organisational Structures of Banks of
Poland (2008) Human Resource Management and Ergonomics, 2 (2), pp. 54-62. ISSN 1337-
0871
Responses:
Blašková, M., Creative proactive-concluding theory of motivating [Kūrybinguma skatinanti
motyvavimo teorija] (2010) Business: Theory and Practice, 11 (1), pp. 39-48.

Stasiak-Betlejewska, R., Rosak, J. The TOWS and SWOT method as the management
strategy of hospitals in Poland [In:] TRANSCOM 2007 7-th European Conference of Young
Research and Scientific Workers, Proceedings, Section 2, Economics and Management, Part
II L-Z, Zilina, Slovak Republic
Responses:
Khaminich, S.Y., Kasian, S.Y., Marketing priorities of commodity positioning at change of
enterprises financial flows, (2008) Actual Problems of Economics, (8), pp. 130-137.
Stasiak-Betlejewska, R., Rosak, J., Machelski, W., The accreditation and the ISO 9001:2000
system as quality determinants of medical services in Poland [In:] TRANSCOM 2007. 7-th
European Conference of Young Research and Scientific Workers, Proceedings, Section 2,
Economics and Management, Part II L-Z, Zilina, Slovak Republic
Responses:
Khaminich, S.Y., Kasian, S.Y., Marketing priorities of commodity positioning at change of
enterprises financial flows, (2008) Actual Problems of Economics, (8), pp. 130-137.
Sujanova, J.a
, Gabris, P.a
, Licko, M.a
, Pavlenda, P.a
, Stasiak-Betlejewska, R.b
a
Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in
Bratislava, Trnava, Slovakia, Aspects of knowledge management in Slovak industrial
enterprises (2012) Proceedings of the European Conference on Knowledge Management,
ECKM, 2, pp. 1135-1144.
Responses:
Stacho Z., Urbancová H., Stachová K., Organisational arrangement of human resources
management in organistaion operating in Slovakia and Czech Republic, Acta Universitatis
Agriculturae et Silviculturae Mendalianae, Vol. LXI No 7/2013. p. 2787-2799.
Stasiak-Betlejewska R., Piasecki P., Analysis of workers satisfaction in company logistic
operator. [In:] Human potential management in a company – Knowledge increase. Trnava:
AlumniPress, p.33-42. ISBN 978-80-8096-144-2.
Responses (1):
Kachanaková A., Stacho Z., Stachová K., Vybrane funckie riadenia ludskych zdrojov v
kontente zmien externeho prostredia organizacii, Zbornik prispevkov z medzinarodnej
redeckiej konferencje „Ekonomicky a socialny rozvoj Slovenska.Efektivnost verejnej spray –
Male a stredne podnikanie – europske hospodarstwo”, Vysoka Skola Ekonomie a
Manazementu verejnej spravy v Bratislave, p. 209 – 218. ISBN: 978-80-89600-07-6
Responses (1):
Stachová K., Stacho Z., Focus of organizations operating in Slovakia on organizational
culture, Management: Science and Education. Faculty of Management Science and
Informatics, University of Żilina, Institute of Management by University of Żilina. EDIS. p.
79-82.
Responses (3):
Stachová K., Stacho Z., Creation of innovative environment in industrial enterprises. Journal
Derew No2-3/2-13. p. 25-31. ISSN 0011-9008.
Responses (4):
Stachová K., Job analysis as a cross-selection function of human resource management.
MEST Journal. No July 2013. P.127-135. DOI 10.12709/mest.01.01.02.12

Rosak J., Stasiak-Betlejewska R., Clients’/Patients’ Satisfaction in Context of Medical
Services Quality. [In:] Human Resource Management and Ergonomics. Vol. II (2) 2008. p.47-
53. ISSN 1337-0871.
Responses:
Blasková M., Motivovanie l’udskeho potenciálu – modely, odporucania a inspircie. Żilinska
Univerzita v Żilinie v EDIS. 2012. CD. ISBN 978-80-554-0555-1.
Borkowski S., Stasiak-Betlejewska R., Identification of the Production Process Determinants
[In:] In Economy and Managemnet of Companies 2013. Medzinarodna vedecka konferencia,
2013. Zvolen. Technicka Univerzita vo Zvolene, p.44-51. ISBN 978-80-228-2565-8
Responses (1):
J. Sekulova, I. Nedeliak, Nove Skusenosti z Modelovania Informacnych a Business Procesov
v żeleznicej nakladnej preprave. Svet Dopravy. Vedecky – recenzowany online casopis. ISSN
1338-9629.
Responses (2):
E. Nedeliakova, J. Sekulova, I. Nedeliak, Nove moznosti integrovanych dopravnych systemov
v SR. Svet Dopravy. Vedecky – recenzowany online casopis. ISSN 1338-9629.
Konstanciak M., Stasiak-Betlejewska R., Borkowski S. 2010. Ważność elementów dachu
domu Toyoty w polskiej hucie. „Hutnik-Wiad.Hut.” R.77 nr 9. p.551-553.
Responses (1):
S. Borkowski, R. Ulewicz, P. Szklarzyk, The quality of glass packaging, Chapter 3. Quality in
the Toyota’s management principles. Borkowski S., Konstanciak M. (ed.) Samara. p. 43-58.
ISBN 978-5-98941-149-8.
Responses (2):
Konstanciak M., Jagusiak M.: Chapter 7. Characteristic of immaterial stores in the company
of steel constructions. [In:] Toyotarity. Knowledge using in service management. Ed. and
Scientific Elaboration Stanisław Borkowski, E.B. Tsoy. Publisher PTM, Warszawa 2010,
p.77 - 92 ISBN 978-83-61949-24-4.
Responses (3):
Selejdak J., Konstanciak M., Knop K. 2012. The Identification of Factors Determining Fabric
Quality. Chapter 7. W: Toyotarity. Quality and Machines Operating Conditions.
Monography. Editing and Scientific Elaboration Stanisław Borkowski, Jacek Selejdak.
Faculty of Logistics, University of Maribor, Celje. p. 75-87. ISBN: 978-961-6562-58-4.
Borkowski S., Stasiak-Betlejewska R. 2008. An Analysis of Toyota Principles Meaning in the
Production Company on the Example of the Mill [In:] Controlling a manazerstvo kvality v
podnikoch. Medzinarodna vedecka konferencia. Zvolen, Slovenska republika, p.85-91.
Responses:
Borkowski S., Krynke M., Pleszyniak M. Improvement of the Books Quality. Chapter 4. [In:]
Quality Product Improvement. Monography. Editing and Scientific Elaboration Stanisław
Borkowski, Robert Ulewicz. Publish.TRIPSOFT. Trnava 2011. p.45-54.
Konstanciak M., Stasiak-Betlejewska R., Borskowki S. 2010. Produkcja opakowań z tektury
falistej. Logistyka No 4, pp.78-81

Responses:
Ingaldi M., Jagusiak-Kocik M. Productivity of the Production System as the Measurements of
Its Production Effects. Chapter 12. [In:] Product Quality Improvement and Companies'
Competitiveness. Monography. Editing and Scientific Elaboration Stanisław Borkowski,
Manuela Ingaldi. University of Malibor, Celje Słowenia 2013, s.144-154, 133-143 978-961-
6562-69-0
Knop K., Jagusiak M., Stasiak-Betlejewska R.: Chapter 12. The application of ABC and
FMEA method to define critical parts and subassemblies of closing machine Gopak,
Production Engineering, red. Borkowski S., Ulewicz R., wyd. Novosibirsk State Technical
University, Novosibirsk 2009, p. 111
Responses:
Selejdak J., Konstanciak M. Praktyczne wykorzystanie instrumentów jakości w procesie
wytwarzania szyn. Hutnik – wiadomości hutnicze. T.79 nr 12, p.952-955
Knop K., Jagusiak M., Stasiak-Betlejewska R. 2009. Chapter 12. The Application of ABC
and FMEA Method to Define Critical Parts and Subassemblies of Closing Machine Gopak.
[In:] Production Engineering. Ed. and Scientific Elaboration Borkowski S., Ulewicz R.
Publisher Novosibirsk State Tech. Univ. Novosibirsk.
Responses (1):
Konstanciak M., Jagusiak-Kocik M. Chapter 5. Importance of the Machine Up-to-Dateness in
the Printing Services. [In:] Quality Control as Process Improvement Factor. Monography.
Editing and Scientific Elaboration Stanisław Borkowski, Manuela Konstanciak.
Ofic.Wydaw.Stowarzyszenia Menedżerów Jakości i Produkcji (SMJiP) Częstochowa 2012, p.
68-83. 978-83-934225-3-1
Responses (2):
Konstanciak M., Jagusiak M., Chapter 4. Analysis of Quality of the Steel Construction on the
Example of the Glass Rack. [In:] Determinants of Product Quality. Monography. Editing and
Scientific Elaboration Stanisław Borkowski, Manuela Konstanciak. Wyd. Liga-Press, Lviv
2011. p. 50-65. 978-966-397-150-3.
Responses (3):
Konstanciak M. Analiza niezgodności konstrukcji stalowych na przykładzie barierki. [In:]
Wybrane zagadnienia produkcji i zarządzania w przedsiębiorstwie. Pr. zbior. pod red. Jerzego
Siwki. Wyd.WIPMiFS PCzęst. Częstochowa 2011. p. 66-76. ISBN 978-83-87745-39-4
Responses (4):
Konstanciak M., Jagusiak M. Chapter 6. Quality analysis of steel constructions on the
example of steel guard-rail. W:Toyotarity. Knowledge using in production management. Ed.
and Scientific Elaboration Stanisław Borkowski, Marcin Nabiałek. Publisher Yurii V.
Makovetsky, Dnipropetrovsk 2010, p. 89 – 104 ISBN 978-966-1507-41-7
Responses (5):
Konstanciak M., Borkowski S., Chapter 6. Analysis of incompatibilities of the plastic
products on the example of car doorsill cover. W: Toyotarity. Standardization in enterprises.
Ed. and Scientific Elaboration Borkowski S., Konstanciak M. Publisher Yurii V. Makovetsky,
Dnipropetrovsk 2010, p. 87- 102, ISBN 978-966-1507-43-1
Borkowski S., Stasiak-Betlejewska R. 2011. Value Analysis in the Insurance Services
Concerning the Construction Investment. Chapter 6. W: Service Processes Improvement.

Monography. Editing and Scientific Elaboration Borkowski S., Jelacić D., Stasiak-
Betlejewska R. Publisher Damir Jelacić. Zagreb.
Responses:
Borkowski S., Knop K., Sitek E. 2013. Heijunka in a clothing company as area of Value
Engeenering. Chapter 6. W: Improvement's Factors in Enterprises/Products Development.
Monography. Editing and Scientific Elaboration Stanisław Borkowski, Piotr Sygut. Faculty of
Logistics, University of Maribor, Celje. s. 42-53. ISBN: 978-961-6562-73-7.
Knop K., Stasiak- Betlejewska R. 2009. Quality problems in the process of labeling glass
packages. Chapter 5. W: Evaluation of Production Processes. Ed. and Scientific Elaboration
Borkowski S., Novak A. Novosibirsk State Tech Univ. Novosibirsk. p. 51-60.
Responses (1):
Borkowski S., Knop K. 2010. Analysis of Quality Problems in Production Concerning
Tomato Concentrate. Chapter 3. W:Toyotarity. Standardization in Enterprises. Monography.
Ed. and Scientific Elaboration Stanisław Borkowski, Manuela Konstanciak. Wyd.Yurii V.
Makovetsky. Dnipropetrovsk. s. 43-58. ISBN: 978-966-1507-43-1.
Responses (2):
Knop K., Selejdak J. 2010. Implementation of FMEA Method to Improvement of Quality Food
Product. Chapter 12. W: Quality and Processes Improvement. Ed. and Scientific Elaboration
Borkowski S., Czaja P. Wyd. Endi Miletić. Sisak. s. 131-142. ISBN: 978-953-56242-2-6.
BORKOWSKI, Stanisław; STASIAK-BETLEJEWSKA, Renata; NÁPRSTKOVÁ, Nataša.
The Kaizen philosophy in the aluminium products improvement. Manufacturing Technology,
2011, Vol. 11, No 11, December, s. 2-5. ISSN 1213‐2489
Responses (1):
Borkowski S., Knop K., Szklarzyk P. 2014. Using a CTQ tree and a QFD matrix for
identification the areas needing improvement in the product – farm truck trailer. 5th
International Conference ICTKI 2014. New Technology Knowledge and Information 2014.
Litoměřice, 29. – 30. 1. 2014. Česká republika. Litoměřice. Czech Republic. PAPERS
PROCEEDINGS. ISBN: 978–80–7414–679-4, str. 21.
Stasiak-Betlejewska R., Mielczarek K., Obońska E.: Analysis of Production Process Factors
in the Food Articles Production. Chapter 4. In: Toyotarity. Realization of Production/Services
Processes. Ed.and Scientific Elaboration Borkowski S., Selejdak J. Publisher Yurii V.
Makovetsky. Dnipropetrovsk 2011, s. 43-52.
Responses (1):
BORKOWSKI S., SZKLARZYK P., KNOP K. 2013. Evaluation of superiors with the use of
12th golden rules of Toyota and the BOST research in a company from machinery branch.
Chapter 8. W: Toyotarity. Management of Intellectual Values. Monography. Editing and
Scientific Elaboration Borkowski S., Rosak-Szyrocka J. Aeternitas Publishing House, Alba
Iulia, Romania. ISBN:978-605-5343-80-4

BORKOWSKI S., STASIAK-BETLEJEWSKA R., KNOP K. 2013. Superior leadership
qualities in the public administration. International Scientific Conference „Young V4 Science
2013“ School of Economics and Management in Public Administration in Bratislava.
Responses (1):
BORKOWSKI S., SZKLARZYK P., KNOP K. 2013. Evaluation of superiors with the use of
12th golden rules of Toyota and the BOST research in a company from machinery branch.
Chapter 8. W: Toyotarity. Management of Intellectual Values. Monography. Editing and
Scientific Elaboration Borkowski S., Rosak-Szyrocka J. Aeternitas Publishing House, Alba
Iulia, Romania. ISBN:978-605-5343-80-4
BORKOWSKI S., STASIAK-BETLEJEWSKA R., KNOP K. 2013. Managerial styles in the
county office. II. International Scientific Conference „Young V4 Science 2013“. School of
Economics and Management in Public Administration in Bratislava.
Responses (1):
BORKOWSKI S., KNOP K., MIELCZAREK K. 2013. An analysis of directing styles in the
production enterprise from the automotive branch. Chapter 12. W: Toyotarity. Strategic
Factors Development of Companies. Monography. Editing and Scientific Elaboration
Borkowski S., Hittmar S. Ankara. ISBN: 978-606-613-078-3.
JELACIC D., STASIAK-BETLEJEWSKA R. 2010. Managers Evaluation in Production
Plants of Wooden Industry. Chapter 7. In: Points of Woodworking Industry Development.
Monography. Ed. and Scientific Elaboration Borkowski S., Jelacic D., Stasiak-Betlejewska R.
Publisher Yurii V. Makovetsky. Dnipropetrovsk.
Responses (1):
BORKOWSKI S., KNOP K., MIELCZAREK K. 2013. An analysis of directing styles in the
production enterprise from the automotive branch. Chapter 12. W: Toyotarity. Strategic
Factors Development of Companies. Monography. Editing and Scientific Elaboration
Borkowski S., Hittmar S. Ankara. ISBN: 978-606-613-078-3.
KNOP, K., STASIAK-BETLEJEWSKA, R. 2009. Quality problems in the process of
labeling glass packages, Chapter 5, In: Evaluation of Production Processes. Ed. and Scientific
Elaboration Borkowski S., Novak A., Novosibirsk State Tech Univ., Novosibirsk 2009. ISBN
978-5-7782-1169-8.
Responses (1):
Borkowski S., Knop K. 2013. The Influence of Innovation on the Nonconformities Structure
in Production of Wooden Wares = Wpływ innowacyjności na strukturę niezgodności przy
produkcji wyrobów dla budownictwa. W: Ekonomika a manažment podnikov 2013. Zbornik
vedeckych prac. Technicka univerzita vo Zvolene. Economy and Management of Companies
2013. 8. medzinarodna vedecka konferencia. Proceedings of Scientific Papers. 19th-20th
September 2013, Zvolen, Slovak Republic. s. 27-35. ISBN: 978-80-228-2565-8.

C. List of three quotations of the greatest significance for the candidate, including
a short statement of reasons
1. Stasiak-Betlejewska R., Borkowski S. (2012) Cluster as an element supporting passive
wooden building development, [in:] WOOD AND FURNITURE INDUSTRY IN TIMES OF
CHANGE-NEW TRENDS AND CHALLENGES . Book Editor(s): Rybansky R.; Novakova
R., Conference: 5th International Conference on Wood and Furniture Industry in Times of
Change - New trends and challenges (WoodEMA) Location: Trnava, SLOVAKIA Date: JUN
06-08, 2012 Sponsor(s): Univ Ss Cyril & Methodius; Univ Ss Cyril & Methodius, Rector;
Fac Mass Media Commun, Dean. Pp. 97-107.
Responses:
By: Greger, K (Greger, Kresimir); Segotic, K (Segotic, Ksenija); Grladinovic, T (Grladinovic,
Tomislav); Blcanic, K (Bicanic, Kristina); Peric, I (Peric, Ivana),
Title: CRITERIA RANKING IN ASSESSING TECHNOLOGICAL PROCESS
CAPABILITY IN FURNITURE MANUFACTURING,
Source: SUMARSKI LIST
Volume: 137
Issue: 5-6
Pages: 279-285
Published: 2013
ISSN: 0373-1332
2. Borkowski, S., Stasiak-Betlejewska, R., Analysis of Bent Furniture Production Costs
(2010) Wood Processing and Furniture Manufacturing: Present Conditions, Opportunities
and New Challenges, pp. 109-115. Vyhne
Responses:
Potkány, M.a
, Hajduková, A.a
, Teplická, K.b
Target costing calculation in the woodworking
industry to support demand at a time of global recession [Ukierunkowane kosztorysowanie w
przemyśle drzewnym w celu wsparcia popytu w okresie światowej recesji]
(2012) Drewno, 187, pp. 89-104.
3. Work cited no. 6 (unabridged quotation including the IF):
Stasiak-Betlejewska, R., Borkowski, S., Contemporary Developmental Orientations in the
Production on the Example of the Furniture Branch (2007) Nove Trendy V Manazerstve
Kvality, pp. 18-22. 3 rocnik medzinarodnoho seminara pedagogov studijneho programu
Kvalita produkcie. Zbornik prednasok. Trnava
Responses:
Jelačić, D.a
, Oblak, L.b
, Petrović, S.c
, Moro, M.a
, Barčić, A.P.a
, Ćošić, V.d
, Meloska, Ž.e
Wood sector media promotion in some South-East European countries [Medijska promocija
drvnog sektora u nekim zemljama jugoistočne europe] (2012) Drvna
Industrija, 63 (3), pp. 195-203.
Short statement of reasons for listed above publications:
 Publications are included in Web of Science and Scopus
 Publications are related to issue analyzed in habilitation thesis focused on issues
related with production and services and its improvements ways

Candidate’s Statutory Declaration:
I hereby declare that all the information given on this form, including the specification of my
participation in achieving the outcomes, is true and correct.
I hereby confirm that the information given on this form is complete and accurate:
Name of the candidate’s employing institution:
Czestochowa University of Technology/Faculty of Management/Institute of Production
Engineering
Name and signature of the candidate’s superior:
In Częstochowa, Poland on 04.04.2016

Publications Web of Science Scopus Stasiak-Betlejewska

Recommended

Recommended

More Related Content

Similar to Publications Web of Science Scopus Stasiak-Betlejewska

Similar to Publications Web of Science Scopus Stasiak-Betlejewska (20)

Publications Web of Science Scopus Stasiak-Betlejewska