The fixture specifications document provides details for two lighting fixtures:
1) The LT1 fixture is a glass panel light with Kingda LEDs that provides 140 lumens per square foot and has a total wattage of 1455W for the first floor dining and bar areas.
2) The LT2 fixture is an uplight wall grazer with Lumencove LEDs that produces 421 lumens and has a total wattage of 271.7W for the first and second floor dining and bar areas. The fixture uses an electronic LED driver and is dimmable.
3) The document provides additional technical details for each fixture, including dimensions, material specifications, power requirements, and warranty
Translucent concrete, also known as light transmitting concrete or LiTraCon, was developed in 2001 by Hungarian architect Aron Losonczi. It is produced by embedding 4-5% optical glass fibers into a concrete mixture. This allows light to pass through the concrete while maintaining comparable strength to regular concrete. Some potential future applications of translucent concrete include translucent inserts on front doors, illuminated sidewalks and stairwells, and light-transmitting subway walls. However, the high cost and complex manufacturing process that requires precise fiber alignment currently limit its widespread use.
Building Materials assignment 1 (Concrete)Syafiq Zariful
This document provides information on five types of building materials: ferrocement, fiber reinforced concrete, gypsum concrete, stamped concrete, and translucent concrete. It discusses the constituents, properties, advantages, disadvantages and applications of each material. Ferrocement is a reinforced cement mortar with wire mesh. It has high tensile strength and is lightweight but labor intensive. Fiber reinforced concrete includes fibers to increase toughness. Gypsum concrete uses gypsum as a binder and is used for partitions and ceilings. Stamped concrete is colored and textured to resemble other materials. Translucent concrete allows light transmission and is used for ceilings and facades.
Litracon is a light-transmitting concrete invented by architect Aron Losonczy in 2001. It is produced by casting thousands of optical fibers directly into concrete mixtures. When light enters one end of the embedded fibers, it is transmitted through the concrete by total internal reflection in the fibers. Litracon has advantages like reduced lighting costs and illuminated structures, though it is more expensive than traditional concrete. Potential applications include translucent walls, ceilings, sidewalks, and other structures.
Transparent concrete is a concrete based building material with light-Tran missive properties due to embedded light optical elements usually Optical fibres. Light is conducted through the stone from one end to the other. Therefore the fibres have to go through the whole object. Transparent concrete is also known as the translucent concrete and light transmitting concrete because of its properties. It is used in fine architecture as a facade material and for cladding of interior walls. In this paper, to integrate the merits of concrete and optical fibre, for developing transparent concrete by arranging the high numerical aperture Plastic Optical Fibres (POF) or big diameter glass optical fibre into concrete. The main purpose is to use sunlight as a light source to reduce the power consumption of illumination and to use the optical fiber to sense the stress of structures and also use this concrete as an architectural purpose for good aesthetical view of the building.
The lighting design for the new headquarters building utilizes LED sources for energy efficient lighting. Various LED fixtures are proposed for ambient lighting, accent lighting, and task lighting throughout the building. Sensors and controls will be used to optimize energy savings through occupancy sensing and daylight harvesting. The functional goal is to use ambient light to mimic natural daylight while lower color temperature task lighting provides visual contrast.
This document provides lighting guidelines for conserving The Death of Socrates painting. It recommends using 2 Cree 7W LED lamps with a 50° beam angle, 94 CRI, 20% dimming capability, and 3000K color temperature. LED lights can achieve preservation targets while reducing power use by 83% compared to other light sources. Safety guidelines include using metal screens to limit illumination to 20 footcandles on the painting and keeping ambient light below 200 lux to optimize the painting's display lifetime.
This document provides specifications for various fluorescent and LED luminaires. It includes information on the housing, finishing, control gear, mounting, model, power consumption, light source, dimensions, light output, beam angle, lamp color, and replacement fluorescent lamps for each model. The models cover a range of product types including batten, industrial, and recessed, surface, and pendant luminaires. Specifications are provided for both fluorescent and LED module options.
The document describes Abtech Custom Solutions' philosophy of providing innovative designs to meet customers' exacting specifications. It provides an example of a low-level emergency escape luminaire called ExGuide that was a compact, rugged solution capable of temporary immersion and providing over 50,000 hours of use without maintenance. The document also describes Abtech's in-house lighting design team that can assist with project design requirements and provide photometric files for luminaire selection.
Translucent concrete, also known as light transmitting concrete or LiTraCon, was developed in 2001 by Hungarian architect Aron Losonczi. It is produced by embedding 4-5% optical glass fibers into a concrete mixture. This allows light to pass through the concrete while maintaining comparable strength to regular concrete. Some potential future applications of translucent concrete include translucent inserts on front doors, illuminated sidewalks and stairwells, and light-transmitting subway walls. However, the high cost and complex manufacturing process that requires precise fiber alignment currently limit its widespread use.
Building Materials assignment 1 (Concrete)Syafiq Zariful
This document provides information on five types of building materials: ferrocement, fiber reinforced concrete, gypsum concrete, stamped concrete, and translucent concrete. It discusses the constituents, properties, advantages, disadvantages and applications of each material. Ferrocement is a reinforced cement mortar with wire mesh. It has high tensile strength and is lightweight but labor intensive. Fiber reinforced concrete includes fibers to increase toughness. Gypsum concrete uses gypsum as a binder and is used for partitions and ceilings. Stamped concrete is colored and textured to resemble other materials. Translucent concrete allows light transmission and is used for ceilings and facades.
Litracon is a light-transmitting concrete invented by architect Aron Losonczy in 2001. It is produced by casting thousands of optical fibers directly into concrete mixtures. When light enters one end of the embedded fibers, it is transmitted through the concrete by total internal reflection in the fibers. Litracon has advantages like reduced lighting costs and illuminated structures, though it is more expensive than traditional concrete. Potential applications include translucent walls, ceilings, sidewalks, and other structures.
Transparent concrete is a concrete based building material with light-Tran missive properties due to embedded light optical elements usually Optical fibres. Light is conducted through the stone from one end to the other. Therefore the fibres have to go through the whole object. Transparent concrete is also known as the translucent concrete and light transmitting concrete because of its properties. It is used in fine architecture as a facade material and for cladding of interior walls. In this paper, to integrate the merits of concrete and optical fibre, for developing transparent concrete by arranging the high numerical aperture Plastic Optical Fibres (POF) or big diameter glass optical fibre into concrete. The main purpose is to use sunlight as a light source to reduce the power consumption of illumination and to use the optical fiber to sense the stress of structures and also use this concrete as an architectural purpose for good aesthetical view of the building.
The lighting design for the new headquarters building utilizes LED sources for energy efficient lighting. Various LED fixtures are proposed for ambient lighting, accent lighting, and task lighting throughout the building. Sensors and controls will be used to optimize energy savings through occupancy sensing and daylight harvesting. The functional goal is to use ambient light to mimic natural daylight while lower color temperature task lighting provides visual contrast.
This document provides lighting guidelines for conserving The Death of Socrates painting. It recommends using 2 Cree 7W LED lamps with a 50° beam angle, 94 CRI, 20% dimming capability, and 3000K color temperature. LED lights can achieve preservation targets while reducing power use by 83% compared to other light sources. Safety guidelines include using metal screens to limit illumination to 20 footcandles on the painting and keeping ambient light below 200 lux to optimize the painting's display lifetime.
This document provides specifications for various fluorescent and LED luminaires. It includes information on the housing, finishing, control gear, mounting, model, power consumption, light source, dimensions, light output, beam angle, lamp color, and replacement fluorescent lamps for each model. The models cover a range of product types including batten, industrial, and recessed, surface, and pendant luminaires. Specifications are provided for both fluorescent and LED module options.
The document describes Abtech Custom Solutions' philosophy of providing innovative designs to meet customers' exacting specifications. It provides an example of a low-level emergency escape luminaire called ExGuide that was a compact, rugged solution capable of temporary immersion and providing over 50,000 hours of use without maintenance. The document also describes Abtech's in-house lighting design team that can assist with project design requirements and provide photometric files for luminaire selection.
Unibox is a UK-based manufacturer that creates advanced LED lighting solutions, including linear lighting, light engines, and display lighting. They offer expertise in creatively integrating lighting into retail and exhibition displays. Their modular LED light engine range includes options from energy efficient Eco boards up to higher density boards, suitable for a wide range of applications.
This document provides information about the Simon KUMA HID decorative light point, including:
- Details on its cylindrical design, mounting options, IP rating, and weight.
- Specifications for its reflectors, lamps, power, sockets, and photometric data.
- Dimensions, materials, finishes, and electrical parameters.
- Instructions for installation, maintenance, and certifications.
This document is a catalog from Gear-Up Electric Pvt. Ltd. that lists and describes their various LED lighting products and electrical wiring accessories. The catalog includes products for domestic, commercial, landscape, and industrial applications such as bulbs, tube lights, panel lights, dimmers, multi-plugs, and switches. The company aims to provide energy efficient LED lighting products and accessories while promoting cleanliness and energy savings.
This document describes plans for an interactive urban kiosk that generates renewable energy and provides various functions to users. It has modules that use wind and solar power to charge batteries and power electrical outputs. Users can charge devices, access wifi, take photos, and control lights and music playback with their smartphone. The kiosk has a commercial transaction area and can adapt its shape based on user interactions. Diagrams show its energy generation capabilities and structural and technical details.
Unibox produces several types of linear LED lighting solutions for retail displays and exhibitions, including the Capella, Mira, Polaris, Sirius, and Velorum models. The lights have adjustable features, different profiles, and power options to suit various display needs. They provide accent lighting, task lighting, shelf lighting, and more to effectively illuminate products on display.
This document summarizes and promotes Litepanels' professional LED lighting products. It describes how Litepanels fixtures are used worldwide in broadcast studios, film/TV productions, and photography. The document highlights Litepanels' wide range of LED fixtures, from on-camera lights to panels to Fresnel fixtures, which offer advantages over traditional lighting like energy efficiency and customizable lighting. It provides information on Litepanels' flagship product lines like the Sola Series daylight balanced LED Fresnels and the Astra 1x1 bi-color LED panel.
Product Feature
■ Using the whole structure cooling technology, obtain efficient cooling performance;
■ Double coupling technology to achieve IP68 protection level, ultra high waterproof dust capacity
■ “Ultra Robust”Technology, single damage, other particle distribution of current constant
■ Useing flip chips technology for LEDS to avoid bolt die lamp risk
■ Human learning efficacy with light, realization, intensity of illumination and equality of
brightness road lighting effect.
Simon Lighting Light Points - Kuma Istanium LEDMktlighting
The document provides information about decorative LED light points from KUMA including:
- Minimalist cylindrical designs with diffusers and various finishes.
- Specifications for light points including LED types, power output, color temperature, IP ratings, materials, dimensions, and photometric distributions.
- Details on electrical parameters, control options, and certifications.
This document provides an overview and specifications for the Roadway Series 315 Cobrahead luminaire line from American Electric Lighting. Key details include:
- The luminaire is designed for roadway, parking, and outdoor lighting applications with a rugged die-cast aluminum housing.
- Electrical components are located on an easily interchangeable module for quick maintenance.
- It has a two-bolt mast arm mount as well as optional four-bolt mounting and features like an adjustable photocontrol receptacle.
- The luminaire is available with various wattage and source options, distributions, voltages, and accessories identified through a detailed ordering code. Specifications like dimensions and weight are also provided
The document describes Flux LED lightboxes, which are illuminated panels for retail and commercial use. They use edge lit technology with a bespoke LED light engine that illuminates a dot-matrix light guide plate for an even distribution of light. Two models are described: the Flux 10, a self-contained 11.5W LED light panel suitable for signage and shelving; and the Flux 18, an all-in-one 38W edge lit solution for illuminated displays with an aluminum frame and clear graphic lens. Both provide bright, even illumination for a variety of applications.
This document provides lighting design plans for the interior and exterior of a private residence. It includes floor plans showing the layout of the ground and first floors with lighting fixture locations. Technical documentation includes power and data layouts, as well as home automation details like lighting control, security, and HVAC integration. Interior lighting designs are provided for rooms like the kitchen, dining room, bedrooms, and bathrooms. Exterior lighting designs illuminate architectural features and landscaping.
This document is a product catalog from Liron Lighting that includes information about their various lighting products. It includes sections on commercial, ceiling, cabinet, and other types of lighting. For each product, it provides the product name, model number, specifications like wattage and dimensions, and a brief description of features. The catalog contains detailed technical specifications and descriptions for over a dozen different LED lighting fixtures and options.
The document provides information on lighting products from Hadar Lighting, including:
- A range of luminaires suitable for hazardous areas certified for Zone 1 and Zone 2, incorporating the latest technologies.
- Product lines include fluorescent, recessed, portable, bulkhead, wellglass, and LED luminaires.
- Detailed specifications, dimensions, ordering information, and installation guidelines are provided for various luminaire models.
This document provides information on Edison Opto Corp's lighting engine and module products, including:
- Light engines that use COB, PLCC, and other LED technologies for downlights, track lights, office lights, and more.
- High lumen street light, tunnel light, and outdoor modules for applications like road lamps.
- Waterproof and IP68 certified light strips for indoor and outdoor use.
- High/low bay lights for industrial applications.
Product details like power, lumens, CRI, and part numbers are provided for the different series.
Guangdong Yibai Optotech Co., Ltd is a reputable manufacturer of a variety of indoor and outdoor LED lighting products. Our products line covers LED high bay lights, LED stadium lights, LED floodlights, LED street lights, LED poultry lamps, LED tri-proof ceiling lights, and LED wall pack lights amongst others.
Located in Zhongshan, Guangdong, China, Yibai LED Lighting is a reputable manufacturer of a variety of indoor and outdoor LED lighting products. Our range includes LED high bay lights, LED stadium lights, LED flood lights, LED street lights, and smart lighting control systems, amongst others.
YIBAI is also a smart outdoor lighting solution provider and smart pole integrator. We provide comprehensive solutions of PLC, Zigbee, RF, LoRa, NB-loT, and GSM/LTE for street, tunnel, solar, and facade lighting to reduce energy consumption and operating costs substantially. The Central Management System integrates the remote lighting control and smart pole and also opens to various applications of smart city, such as smart parking, smart waste management, smart traffic, and so on
This document discusses different options for kitchen islands. It notes that islands can provide additional storage, food preparation space, and seating. There are various surface materials that should be chosen based on intended use. Islands can also include options like drop leaf sides, shelves, and cabinets to optimize storage and workspace. Properly selecting an island allows it to become a functional and stylish focal point in the kitchen.
Mini Beacon linear light catalog 20221019.pdfpalkighai97
This document provides specifications for several Mini Beacon linear light models, including:
- A 3-head linear down light with 6W or 12W output and dimensions of 70x32x58mm or 178x54x55mm.
- A 6-head linear spot light and wall washer with 6W or 12W output and dimensions of 85x46x58mm or 142x46x58mm.
- The lights feature Bridgelux COB LEDs with a CRI over 90, IP40 rating, and a lifetime over 5000 hours.
This document provides technical specifications for event spaces at Espace Saint-Marc including the Large Hall, Foyer, Communal Room, Projection Room, and Guest Room. Details include dimensions, capacities, equipment, lighting, sound, and electrical specifications for each room. The Large Hall can accommodate up to 1800 people standing or 800 seated and has a fully equipped stage and tiered seating. The other rooms provide additional breakout spaces and amenities.
Thorne & Derrick UK are specialist distributors of Hadar Hazardous Area Lighting ranges providing expert technical guidance, site surveys, competitive quotations, ex stock delivery and a comprehensive lighting design service - this includes Zone 1 and Zone 2 (ATEX) fluorescent, recessed, portable, bulkhead, wellglass and floodlights.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : flourescent, recessed, helideck, LED floodlight, bulkhead and well glass.
This document contains lighting design plans and specifications for the Salvatore Ferragamo flagship store on 5th Avenue. It includes details on various lighting fixtures from manufacturers like iGuzzini, DLC, Ambient, Luceplan, and Covelight that will be used throughout the store. Fixtures include downlights, panels, linear lights, fiber optics, and cove lighting to illuminate merchandise displays, architectural details, and general lighting. The lighting design was created by Jozhe Fonseca and retouched on April 9th, 2013.
This document provides lighting specifications and diagrams for different facility types including a hospital nurse station, patient room, and elementary school rooms. It lists various lighting fixtures from the Winona and Beta-Calco brands to be used for ambient, task, accent, and night lighting. Controls include WattStopper ceiling occupancy sensors, switches, dimming sensors, and a room controller. The lighting plans are intended to provide the right light levels and distributions for different functions within healthcare and educational facilities.
Unibox is a UK-based manufacturer that creates advanced LED lighting solutions, including linear lighting, light engines, and display lighting. They offer expertise in creatively integrating lighting into retail and exhibition displays. Their modular LED light engine range includes options from energy efficient Eco boards up to higher density boards, suitable for a wide range of applications.
This document provides information about the Simon KUMA HID decorative light point, including:
- Details on its cylindrical design, mounting options, IP rating, and weight.
- Specifications for its reflectors, lamps, power, sockets, and photometric data.
- Dimensions, materials, finishes, and electrical parameters.
- Instructions for installation, maintenance, and certifications.
This document is a catalog from Gear-Up Electric Pvt. Ltd. that lists and describes their various LED lighting products and electrical wiring accessories. The catalog includes products for domestic, commercial, landscape, and industrial applications such as bulbs, tube lights, panel lights, dimmers, multi-plugs, and switches. The company aims to provide energy efficient LED lighting products and accessories while promoting cleanliness and energy savings.
This document describes plans for an interactive urban kiosk that generates renewable energy and provides various functions to users. It has modules that use wind and solar power to charge batteries and power electrical outputs. Users can charge devices, access wifi, take photos, and control lights and music playback with their smartphone. The kiosk has a commercial transaction area and can adapt its shape based on user interactions. Diagrams show its energy generation capabilities and structural and technical details.
Unibox produces several types of linear LED lighting solutions for retail displays and exhibitions, including the Capella, Mira, Polaris, Sirius, and Velorum models. The lights have adjustable features, different profiles, and power options to suit various display needs. They provide accent lighting, task lighting, shelf lighting, and more to effectively illuminate products on display.
This document summarizes and promotes Litepanels' professional LED lighting products. It describes how Litepanels fixtures are used worldwide in broadcast studios, film/TV productions, and photography. The document highlights Litepanels' wide range of LED fixtures, from on-camera lights to panels to Fresnel fixtures, which offer advantages over traditional lighting like energy efficiency and customizable lighting. It provides information on Litepanels' flagship product lines like the Sola Series daylight balanced LED Fresnels and the Astra 1x1 bi-color LED panel.
Product Feature
■ Using the whole structure cooling technology, obtain efficient cooling performance;
■ Double coupling technology to achieve IP68 protection level, ultra high waterproof dust capacity
■ “Ultra Robust”Technology, single damage, other particle distribution of current constant
■ Useing flip chips technology for LEDS to avoid bolt die lamp risk
■ Human learning efficacy with light, realization, intensity of illumination and equality of
brightness road lighting effect.
Simon Lighting Light Points - Kuma Istanium LEDMktlighting
The document provides information about decorative LED light points from KUMA including:
- Minimalist cylindrical designs with diffusers and various finishes.
- Specifications for light points including LED types, power output, color temperature, IP ratings, materials, dimensions, and photometric distributions.
- Details on electrical parameters, control options, and certifications.
This document provides an overview and specifications for the Roadway Series 315 Cobrahead luminaire line from American Electric Lighting. Key details include:
- The luminaire is designed for roadway, parking, and outdoor lighting applications with a rugged die-cast aluminum housing.
- Electrical components are located on an easily interchangeable module for quick maintenance.
- It has a two-bolt mast arm mount as well as optional four-bolt mounting and features like an adjustable photocontrol receptacle.
- The luminaire is available with various wattage and source options, distributions, voltages, and accessories identified through a detailed ordering code. Specifications like dimensions and weight are also provided
The document describes Flux LED lightboxes, which are illuminated panels for retail and commercial use. They use edge lit technology with a bespoke LED light engine that illuminates a dot-matrix light guide plate for an even distribution of light. Two models are described: the Flux 10, a self-contained 11.5W LED light panel suitable for signage and shelving; and the Flux 18, an all-in-one 38W edge lit solution for illuminated displays with an aluminum frame and clear graphic lens. Both provide bright, even illumination for a variety of applications.
This document provides lighting design plans for the interior and exterior of a private residence. It includes floor plans showing the layout of the ground and first floors with lighting fixture locations. Technical documentation includes power and data layouts, as well as home automation details like lighting control, security, and HVAC integration. Interior lighting designs are provided for rooms like the kitchen, dining room, bedrooms, and bathrooms. Exterior lighting designs illuminate architectural features and landscaping.
This document is a product catalog from Liron Lighting that includes information about their various lighting products. It includes sections on commercial, ceiling, cabinet, and other types of lighting. For each product, it provides the product name, model number, specifications like wattage and dimensions, and a brief description of features. The catalog contains detailed technical specifications and descriptions for over a dozen different LED lighting fixtures and options.
The document provides information on lighting products from Hadar Lighting, including:
- A range of luminaires suitable for hazardous areas certified for Zone 1 and Zone 2, incorporating the latest technologies.
- Product lines include fluorescent, recessed, portable, bulkhead, wellglass, and LED luminaires.
- Detailed specifications, dimensions, ordering information, and installation guidelines are provided for various luminaire models.
This document provides information on Edison Opto Corp's lighting engine and module products, including:
- Light engines that use COB, PLCC, and other LED technologies for downlights, track lights, office lights, and more.
- High lumen street light, tunnel light, and outdoor modules for applications like road lamps.
- Waterproof and IP68 certified light strips for indoor and outdoor use.
- High/low bay lights for industrial applications.
Product details like power, lumens, CRI, and part numbers are provided for the different series.
Guangdong Yibai Optotech Co., Ltd is a reputable manufacturer of a variety of indoor and outdoor LED lighting products. Our products line covers LED high bay lights, LED stadium lights, LED floodlights, LED street lights, LED poultry lamps, LED tri-proof ceiling lights, and LED wall pack lights amongst others.
Located in Zhongshan, Guangdong, China, Yibai LED Lighting is a reputable manufacturer of a variety of indoor and outdoor LED lighting products. Our range includes LED high bay lights, LED stadium lights, LED flood lights, LED street lights, and smart lighting control systems, amongst others.
YIBAI is also a smart outdoor lighting solution provider and smart pole integrator. We provide comprehensive solutions of PLC, Zigbee, RF, LoRa, NB-loT, and GSM/LTE for street, tunnel, solar, and facade lighting to reduce energy consumption and operating costs substantially. The Central Management System integrates the remote lighting control and smart pole and also opens to various applications of smart city, such as smart parking, smart waste management, smart traffic, and so on
This document discusses different options for kitchen islands. It notes that islands can provide additional storage, food preparation space, and seating. There are various surface materials that should be chosen based on intended use. Islands can also include options like drop leaf sides, shelves, and cabinets to optimize storage and workspace. Properly selecting an island allows it to become a functional and stylish focal point in the kitchen.
Mini Beacon linear light catalog 20221019.pdfpalkighai97
This document provides specifications for several Mini Beacon linear light models, including:
- A 3-head linear down light with 6W or 12W output and dimensions of 70x32x58mm or 178x54x55mm.
- A 6-head linear spot light and wall washer with 6W or 12W output and dimensions of 85x46x58mm or 142x46x58mm.
- The lights feature Bridgelux COB LEDs with a CRI over 90, IP40 rating, and a lifetime over 5000 hours.
This document provides technical specifications for event spaces at Espace Saint-Marc including the Large Hall, Foyer, Communal Room, Projection Room, and Guest Room. Details include dimensions, capacities, equipment, lighting, sound, and electrical specifications for each room. The Large Hall can accommodate up to 1800 people standing or 800 seated and has a fully equipped stage and tiered seating. The other rooms provide additional breakout spaces and amenities.
Thorne & Derrick UK are specialist distributors of Hadar Hazardous Area Lighting ranges providing expert technical guidance, site surveys, competitive quotations, ex stock delivery and a comprehensive lighting design service - this includes Zone 1 and Zone 2 (ATEX) fluorescent, recessed, portable, bulkhead, wellglass and floodlights.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : flourescent, recessed, helideck, LED floodlight, bulkhead and well glass.
Similar to Por Fin Bulla Gastrobar Restaurant (20)
This document contains lighting design plans and specifications for the Salvatore Ferragamo flagship store on 5th Avenue. It includes details on various lighting fixtures from manufacturers like iGuzzini, DLC, Ambient, Luceplan, and Covelight that will be used throughout the store. Fixtures include downlights, panels, linear lights, fiber optics, and cove lighting to illuminate merchandise displays, architectural details, and general lighting. The lighting design was created by Jozhe Fonseca and retouched on April 9th, 2013.
This document provides lighting specifications and diagrams for different facility types including a hospital nurse station, patient room, and elementary school rooms. It lists various lighting fixtures from the Winona and Beta-Calco brands to be used for ambient, task, accent, and night lighting. Controls include WattStopper ceiling occupancy sensors, switches, dimming sensors, and a room controller. The lighting plans are intended to provide the right light levels and distributions for different functions within healthcare and educational facilities.
The document discusses lighting strategies and fixture schedules for three different lighting designs:
1. High End Commercial Lighting uses track lighting with different lamp types for ambient and accent lighting, aiming for 15-40 fc ambient and 50-75 fc accent and task lighting.
2. Intermediate Retail Lighting uses partially concealed accent lights with task and ambient lighting, aiming for 35-45 fc ambient and 75-100 fc accent and task.
3. Intermediate Hospitality Lighting uses concealed ambient lighting with decorative task and directional accent lights in a low voltage design, aiming for 15-40 fc ambient and 35-50 fc accent and task.
The document describes Jane Meadow-Brook's herbal business that has brought her success, wealth, and entertainment. It also mentions her financial advisor Mr. Meadow-Brook who is described as tall with movie-star looks and a white streak in his dark hair. The rest of the document lists different types of light fixtures for a residential study.
This document describes a lighting installation project for Moynihan Station in New York City. It will feature a titanium and carbon fiber luminaire with both LED array and OLED light sources. The luminaire will have a longest perimeter of 63 feet, smallest of 21 feet, and mean perimeter of 42 feet. It will use 1170 flexible SMD LED modules across 60 meridians, totaling 2520 feet of light strip, providing 33 lumens per square foot of light output.
This document provides an inventory and description of the existing lighting fixtures at the West Side Tennis Club, including fixture types, locations, and lamping. It then outlines a proposed lighting renovation project, recommending replacements of various fixtures with new LED and CFL options to improve energy efficiency. New decorative fixtures are also proposed to enhance the historic character of the different spaces in keeping with a Tudor style.
This document contains technical information about building systems including moveable partitions, solar shading panels, skylights, and lighting fixtures that can track the sun as well as sections and views of an auditorium space. It provides product data and precedents for various sustainable and technologically advanced building elements.
This document discusses plans and concepts for lighting a botanical conference room for a cosmetics company. Gladiolus flowers symbolize meetings and will be used as decor. Various lighting fixtures like recessed cold cathodes, linear downlights, and suspended LEDs will be installed to establish image and enhance product colors from 20-50 fc. Occupancy sensors and dimming will be utilized for energy efficiency. Order sheets and specifications are provided for the lighting equipment and controls.
This document discusses several light source applications including the Nippo Linear Fluorescent Indirect Pendant, Cooper Lighting Biax (96W) SCG24 2x4ft Pendant, and Lightolier Opalescent LED Pendant. For each light source, calculations are provided.
This document discusses lighting calculations and concepts including luminance, radiosity, illuminance values, iteration, and luminaires. It likely contains technical information on how to calculate and measure lighting levels using various metrics and methods. The document appears to be providing information for lighting design and engineering.
The document provides details about Jean Nouvel's office tower design in Doha, Qatar. It describes how Nouvel aimed to transform the space into a poetic arena through careful design of surfaces, textures, and light. Specifically, it discusses how the front wall uses engraved openings and lighting to illuminate dramatic views, while louvers on the east side work like window coves to diffuse morning and midday light. A large back opening serves as a night sky observatory.
Automatic lighting controls like occupancy sensors and daylight sensors can significantly reduce energy usage from lighting. Occupancy sensors use passive infrared, ultrasonic, or dual technologies to detect human presence and turn lights on or off. Ultrasonic sensors emit ultrasonic waves and detect changes in frequency to detect movement, working well in partitioned spaces. Dual sensors combine infrared and ultrasonic for higher reliability. Daylight sensors dim or switch off lights based on natural light levels. Lighting management systems allow more advanced control and settings by combining sensor technologies and scheduling. Proper sensor placement and orientation is important for coverage and avoiding nuisance switching. Occupancy sensors come in different styles and with additional features for various applications.
History of lighting - display & exhibitJozhe Fonseca
This document provides a historical overview of the development of display and exhibit lighting from the 1860s to the late 1930s. Some of the key developments discussed include the first electrical illumination at Niagara Falls in 1879 using open arc lamps; early electric signs in New York and Chicago in the 1890s; the introduction of neon lighting by Georges Claude in 1910; elaborate lighting displays at world's fairs in the early 20th century; and the proliferation of electric signs in Times Square in the 1920s. The document traces the evolution of lighting technology for displays and exhibits over this period.
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
International Upcycling Research Network advisory board meeting 4Kyungeun Sung
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
Best Digital Marketing Strategy Build Your Online Presence 2024.pptxpavankumarpayexelsol
This presentation provides a comprehensive guide to the best digital marketing strategies for 2024, focusing on enhancing your online presence. Key topics include understanding and targeting your audience, building a user-friendly and mobile-responsive website, leveraging the power of social media platforms, optimizing content for search engines, and using email marketing to foster direct engagement. By adopting these strategies, you can increase brand visibility, drive traffic, generate leads, and ultimately boost sales, ensuring your business thrives in the competitive digital landscape.
Practical eLearning Makeovers for EveryoneBianca Woods
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...Designforuminternational
India’s architectural landscape is a vibrant tapestry that weaves together the country's rich cultural heritage and its modern aspirations. From majestic historical structures to cutting-edge contemporary designs, the work of Indian architects is celebrated worldwide. Among the many firms shaping this dynamic field, Design Forum International stands out as a leader in innovative and sustainable architecture. This blog explores some of the best Indian architects, highlighting their contributions and showcasing the most famous architects in India.
1. LT14 Exterior wall Fixture James Clar - Square Eclipse
30 cm x 30 cm x 4 cm LED Microcontrollers Acrylic
Exterior Fixtures
2. 1st Fl. Control Zones
The central concept is an organic shaped ligthing design with the use of Materials that sparkle under grazing light and Fixtures
with points of LED light that look like they also sparkle.
9. 2nd Fl Fixtures
Modernus Light Plus LED Swing
Door
LT9 Lumenpulse Lumen-
dome Nano Color Changing
2-inch LED 48V DC Control
DMX
LT5 TAL - Drip - GX 5.3 9W
Dimmable
LT10 Accent Axo Light
Mind LED Pleton Recessed
Uplight - 4W LED 24V
3000k
LT12 WDM Lighting 32 Watt Dual
Port RGB LED Fiber Optic Illuminator
400 .75mm fibers
10. Surface Decorative Dandeli-
ons - Fragile Future 2 LED
2nd Fl Dinning Area Decorative Fixtures
Arturo Alvarez Planum wall lamp 37.75in x 37.75in - 4 X 24W HO
T5 Bi-Pin Fluorescent
15. Control Intent 1st and 2nd FL
2 units - 16-zone GRAFIK Eye QS Wireless with EcoSystem Main Unit
120-127 V or 220-240 V Model Number QSGRJ-16E
1st Floor Diagram 2nd Floor Diagram
Operating Hours Dimming Clock
16. Fixture Schedule
Fixture Schedule
Type/
Symbol Description Manufacturers Lamp W Location Notes Model
LT1 (886 Sq/ft)
Ambient Ceiling
Glass Panel Light
in steel frame
KINGDA LED 3500K 120V
140lm Sq/ft,
1.6W/ft
1455W 1st
Fl Dinning, Bar Electronic
LED Driver
Product 67
LT2
(11)Accent
Uplight
Wall Grazer
Lumencove RO
8°Beam, Orange
R230 G50 B35
Lumenpulse 24.7W 4´ LED
421lm
271.7W 1st
Fl Dining, Bar
2nd
Fl Dining, Bar
Electronic
LED Driver
Dimmable
LCS 120 48 RGB 1FX FR
FT CC Orange
LT3 (32) Accent
Downlight Wall
Grazer STR9 12°
24V Black
GVA lighting 24W 4´ LED
470lm 3500K
768W 1st
, 2nd
Fl, Staircase Electronic
LED Driver
Dimmable STR9
LT4
(4) Task
Suspended
Downlight
Raimond R43
D16.9”
Ox-ID 92 LEDs 15W
329lm 2700K
60W Driver in canopy
220V input
5V output
dimmable 30%
line voltage R, L
type incandescent
dimmer
ULMOLLEDR43A
LT5
(84) Task
Downlight
Round
Suspended Drip
TAL 9W LED MR16
GX 5.3
756W 1st
, 2nd
Fl Seated
Areas
Lutron Electronic
LED Driver
Dimmable 330 TI TUBE
LT6
(9) Accent Cloud
Wall Sconce
Aluminum
W3,78”
Foscarini 2.8W 35W
Replacement LED
Tower RV Bulb
G4 Bi-Pin 360lm
Warm White
25.2W 2nd
Fl Dinning Rooms,
Outside lounge
Lutron Electronic
LED Driver
Dimmable FOS-cloudwall
140005 10
LT7
(164’) Task Light
VENUS W
VarioLED™ LED 109l/ft
3700K 3.3W/ft
541W 1st
, 2nd
Fl Bars Electronic
LED Driver
0-10V Dimming
W TV IP68
LT8
(78’) Accent
Light Flex
VENUS Blue
R35 G150 B190
VarioLED™ LED 29lm/ft
3700K 2.6W/ft
203W 1st
, 2nd
Fl Bars,
Bathroom Lobby
Electronic
LED Driver
0-10V Dimming
RGB TV IP68
LT9
(14) Task Surface
Downlight
Lumendome
Nano 2”
Lumenpulse 2W LED 48V DC 28W 2nd
Fl Bathrooms Electronic
LED Driver
49 528
17. Fixture Schedule
Fixture Schedule
Type/
Symbol Description Manufacturers Lamp W Location Notes Model
LT10
(4) Accent
Light Mind LED
Pleton Recessed
Uplight
Fabbian 1 X 4W LED
3000k 24V
16W 2nd
Fl Bathroom
Lobby
Cricket 9 Watt Driver
FAB-A55102
Cricket D60 FAB-
CRICKET-D60F16-
F20-HOUSING
D60 F28 A60
LT11
(220) Accent
Modular
Synapse RGB
Luceplan 1W LED RGB
white
220W Staircase walls Electronic
24V transformer
LT12
(3) Ambient
Suspended
Downlight
Dual Port RGB
Illuminator
WDM Lighting 32 W LED Fiber
Optic 400 .75mm
fibers
96W Outdoor Area 12V DC transformer
LT13
(2) Decorative
LED DMX
Illuminator
WDM Lighting 80W LED White
4300lm 1050
fibers
6 in a bundle
cables
160W 2nd
Fl Dinning Rooms 12V DC transformer
LT14
(5) Decorative
Sconce Square
Eclipse 30 cm
x 30 cm x 4 cm
Acrylic
under KINGDA
LED Panel
James Clar LED Micro
controllers
1st
Fl Façade Electronic LED Driver
Lead Time: Place order 12 weeks prior to the installation
Note: To ensure on schedule installation, substitutions will not be accepted.
18. Load Schedule
Zones Load Type Total Watts Dimming Location Descripiom
101 120V 1455W LED Driver
Dimming
1st
Fl LED Ceiling Surface Panel
102 24 Volt 48W LED Driver
Dimming
Lobby LED Wall Grazer
103 24V 6.6 W LED Driver
Dimming
Lobby LED Strip
104 120V 45W Driver in canopy
dimmable 30%
line voltage R, L
Lobby
1st Fl Dinning Room
LED Suspended Pendant
105 120V 171W LED Driver
Dimming
1st Fl Bar LED Pendants Pin Light
106 12V 121W Electronic
LED Driver
1st Fl Bar LED RGB Decorative Strip
107 12V 99W Electronic
LED Driver
1st Fl Bar LED Strip
108 24V 360W LED Driver
Dimmer
1st
Fl Dinning LED Grazers
109 120V 135W LED Driver
Dimming
1st
Fl Lounge LED Pendants Pin Light
110 24 Volt 296.4W LED Driver
Dimming
1st
Fl Lounge LED Grazing
111 24Volt 82.5 W LED Driver
Dimming
1st Fl Dinning Room
Staircase
LED Strip Task
112 24V 220W LED Driver
Dimming
Stairwell LED Decorative Modular
113 12V 72W Electronic
LED Driver
Staircase LED Grazer
114 12V 50W Electronic
LED Driver
Façade Exterior LED Sconce
115 120 Volt 99W Electronic
LED Driver
Dimmer
Kitchen Counter LED Pendants Pin Light
116 12V W Electronic
LED Driver
Women’s Bathroom LED Surface
Load Schedule and Controls 1st Fl Zones
19. Zones Load Type Total Watts Dimming Location Descripiom
201 24V 74W LED Driver
Dimming
2nd
Fl Bar LED Strip Task
202 24V 38.5W LED Driver
Dimming
2nd
Fl Bar LED Strip Decorative
203 24V 144W LED Driver
Dimming
2nd
Fl Bar LED Grazer
204 24 V 168W LED Driver 2nd
Fl Staircase,
Elevator Wall
LED Grazer
205 12V 160W Electronic
LED Driver
Dimming
2nd
Fl Dinning Rooms LED Illuminators, Surface Sparkle
206 48V 47W Electronic
LED Driver
Dimming
Women’s Bathroom LED Surface Downlights, LED Wall lights
207 24V 163W Electronic
LED Driver
Bathroom Lobby,
Corridor
LED Recessed Uplight, LED Grazer, LED Strip
208 48V 47W Electronic
LED Driver
Dimmer
Men’s Bathroom LED Surface Downlights, LED Wall lights
209 12V 96W LED Driver
Dimming
2nd
Fl Outdoor Lounge LED Illuminators, Optical IFibers
210 24V 11.2W LED Driver
Dimming
2nd
Fl Outdoor Lounge LED Sconce
211 24V 20 W LED Driver
Dimming
2nd
Fl Dinning Rooms LED Sconce
212 120V 135W Electronic
LED Driver
Dimming
2nd
Fl Dinning Room LED Pendants Pin Light
213 24V 92W Electronic
LED Driver
2nd
Fl Private Dinning LED Surface
214 24V 15W Driver in canopy
dimmable 30%
line voltage R, L
type Dimmer
2nd
Fl Private Dinning LED Suspended Downlight
215 120V 108W LED Driver
Dimmer
2nd
Fl Dinning Room LED Pendants Pin Light
216 24V LED Driver 2nd
Fl Private Dinning LED Decorative
Lead Time: Place order 12 weeks prior to the installation
Note: To ensure on schedule installation, substitutions will not be accepted.
Load Schedule and Controls 2nd Fl Zones
20. Control Narrative
Space Type MANUAL
ON
DIMMING
SWITCH
MULTI ZONE
SWITCH
SWITCH TIME CLOCK
ON
TIME CLOCK
OFF
OCCUPANCY
SENSOR ON
OCCUPANCY
SENSOR OFF
Lobby/
Reception
Ambient
Light
X X X X
Bar Area
X X X
Ground
Floor
Dinning
Rooms
X X X
Staircase
X X X
Kitchen
& Pantry X X X
2nd
Fl Bar
Area X X X X
2nd
Fl
Dinning X X X
Outside
Lounge X X X
Restroom
X X X X X
Private
Dinning X X X
Storage &
Offices X X X X X
Exterior
Lighting X X X X
Control Narrative