Affection Management is a mindset that helps cultural institutions build strong relationships with the different audiences and play a relevant role in their communities.
Powered by culture, innovation and connections.
This financial document summarizes Prophecy Coal Corp's condensed consolidated interim financial statements for the nine month period ended September 30, 2011. It includes the condensed consolidated interim statements of financial position, operations and comprehensive loss, changes in equity, and cash flows. Notes to the financial statements provide details on the nature of operations, basis of preparation of the financial statements, acquisitions and restatements, segmented information, cash and cash equivalents, and other assets and liabilities. Management is responsible for the preparation of the financial statements and maintaining internal controls, while the Board of Directors provides oversight.
Affection Management is a mindset that helps cultural institutions build strong relationships with the different audiences and play a relevant role in their communities.
Powered by culture, innovation and connections.
This financial document summarizes Prophecy Coal Corp's condensed consolidated interim financial statements for the nine month period ended September 30, 2011. It includes the condensed consolidated interim statements of financial position, operations and comprehensive loss, changes in equity, and cash flows. Notes to the financial statements provide details on the nature of operations, basis of preparation of the financial statements, acquisitions and restatements, segmented information, cash and cash equivalents, and other assets and liabilities. Management is responsible for the preparation of the financial statements and maintaining internal controls, while the Board of Directors provides oversight.
El documento discute tres posiciones sobre la definición de salud y enfermedad: biologista, ecologista y social. Cristina Laurell propone una posición social donde la salud-enfermedad es un problema colectivo determinado por procesos sociales. Define la enfermedad como manifestación de dichos procesos sociales que afectan las relaciones entre huésped, agente y ambiente. El objeto de estudio son grupos construidos por características sociales más que biológicas.
The passage discusses the importance of summarization for processing large amounts of text data. It notes that automatic summarization systems aim to condense long documents into shorter summaries while maintaining the most important concepts and entities. The challenges of building such systems include identifying the most salient pieces of information, organizing them coherently, and presenting the summary using natural language.
Margaret Mead was an influential 20th century anthropologist who studied how culture and environment shape human behavior and development. Her most famous work, Coming of Age in Samoa, analyzed the transition to adulthood in Samoan society and found that Samoan adolescents experienced less stress and conflict compared to American youth. However, Mead's work has also faced criticism for potentially misrepresenting Samoan culture. Overall, Mead was an early proponent of the view that gender roles and social norms are culturally determined rather than biologically fixed.
Electronic channels involve using the internet to reach end users and allow consumers to buy online. They are used for both business-to-business and business-to-consumer transactions. While electronic channels provide advantages like convenience of 24/7 purchasing and access to a wide selection of products, they also present challenges like security concerns, difficulties returning products, potential stock outs or delivery delays, and higher shipping costs compared to brick-and-mortar stores. Electronic channels can also cause conflicts with traditional retail channels if not properly coordinated between manufacturers, online retailers, and physical stores.
Prophecy Resource Corp. is focused on acquiring base and precious metal exploration properties in British Columbia. In 2008, the company conducted drilling programs at its Okeover copper-molybdenum property, located north of Powell River, BC. Drilling expanded the known mineralized area at the North Lake Zone and intersected intercepts grading up to 0.41% copper and 0.001% molybdenum over 12 meters. Prophecy has now earned a 60% interest in the Okeover property from Eastfield Resources Ltd. by spending over $1 million on exploration as required.
Prophecy Resource Corp is focused on acquiring base and precious metal exploration properties in British Columbia. It obtained an option to earn a 60% interest in the Okeover copper-molybdenum property from Eastfield Resources Ltd. Prophecy conducted drilling programs at Okeover in 2007 and 2008 that expanded the known mineralized area at the North Lake Zone, with highlights including 45.5 meters grading 0.33% copper. Prophecy has now earned a 60% interest in the Okeover property by spending over $1 million in exploration and intends to form a joint venture with Eastfield for further exploration and development.
- Prophecy Resource Corp. released unaudited financial statements for the quarter ended December 31, 2006. The statements have not been reviewed by an auditor.
- During the quarter, the company reported a net loss of $60,207 and ended with $135,119 in cash. The loss was primarily due to $55,304 in stock-based compensation for management fees.
- Cash flows included $4,822 used for deferred exploration costs and $19,000 used for deferred finance fees, while $4,833 was received from related parties.
This document provides the financial statements for Prophecy Resource Corp. as of September 30, 2008. It includes a balance sheet showing total assets of $1,355,633 including cash, investments, and mineral property assets, as well as total liabilities of $105,053 and shareholders' equity of $1,250,580. It also includes statements of operations showing a net loss of $75,326 for the year, comprehensive loss, and deficit, as well as statements of cash flows showing cash used by operating and investing activities and provided by financing activities. Notes to the financial statements provide additional details on nature of operations, accounting policies, and related party transactions.
This document provides information about a diploma in educational leadership and management from Dar-e-Arqam School in Abbottabad, Pakistan. The diploma aims to equip students with knowledge of educational management and leadership, enable them to apply research and theory to improve their institutions, and allow professional development through reflection. The document outlines several topics that will be covered in the program, including leadership styles, building a conducive learning environment, managing co-curricular activities, human resource management, and developing a strategic vision.
Prophecy Resource Corp.'s unaudited interim financial statements for the period ending June 30, 2008 show that the company had a net loss of $41,609. Assets included $16,137 in cash, $280,000 in short-term investments, and $1,046,240 in deferred exploration costs. Liabilities were $84,873 including $83,879 owed to related parties. Shareholders' equity was $1,243,731 with share capital of $1,352,176 and a deficit of $303,410.
Prophecy Resource Corp is focused on acquiring and exploring base and precious metal properties in British Columbia.
In the first quarter of 2008, the company spent $13,798 exploring its primary property, the Okeover copper-molybdenum
project. Exploration at Okeover in 2007 included expanding the existing North Lake resource zone through drilling and
discovering a new zone of mineralization at the South Breccia area through drilling. Prophecy plans to continue expanding
resources at North Lake and exploring the potential of the South Breccia discovery through additional drilling in 2008. As a
junior exploration company, Prophecy's level of operations is determined by its available
When sixteen year old Claire Wallhart discovers that she is a Night Hunter, her world is turned upside down. With the help of her instructor. Erik, she will fight off the evil creatures of the night in order to protect all man kind.
Charlotte Sale on her experiences on 'Britain's Next Big Thing', from the Hid...Hidden Art
Charlotte Sale on her experiences taking part in the TV programme 'Britain's Next Big Thing' and selling her products to Liberty, taken from the Hidden Art Forum 2011: Making Sales
This document contains a Bahasa Melayu exam with multiple sections. Section A contains an image and instructions to write 5 sentences describing the bus stop scene. Section B asks the student to choose one of three essay prompts and write a response of at least 80 words. The prompts are about a school carnival, ways to respect teachers, or an essay ending with a given sentence about realizing teachers care about students. Section C instructs the student to write 4 moral values learned from a given excerpt in under 50 words per value.
Rangkuman dokumen tersebut adalah:
1) Dokumen tersebut merupakan rancangan tahunan pendidikan seni visual untuk tingkatan 4 yang mencakupi berbagai bidang dan teknik seni rupa seperti menggambar, membuat corak, membentuk, dan membuat binaan;
2) Setiap minggu akan diajarkan satu bidang dan teknik tertentu beserta hasil pembelajaran, objektif, dan catatan yang terkait;
3) Pelajaran
Dokumen tersebut membahasikan pendekatan didik hibur dalam pengajaran bahasa Malaysia di sekolah. Ia menjelaskan konsep didik hibur, objektifnya, dan bagaimana aktiviti seperti nyanyian dan lakonan dapat digunakan untuk meningkatkan pembelajaran bahasa secara menyeronokan.
Gibbscam solution for mill/turn machinettehnologie
GibbsCAM is a CAM software solution for programming multitasking mill-turn CNC machines. It was founded in 1982 and acquired by Cimatron in 2008. GibbsCAM allows for integrated CAD data processing, machine simulation, and post-processing for multitasking mill-turn machines. It provides capabilities for multi-axis milling, turning, and live tooling operations to maximize productivity on multi-turret and multi-spindle machines.
El documento discute tres posiciones sobre la definición de salud y enfermedad: biologista, ecologista y social. Cristina Laurell propone una posición social donde la salud-enfermedad es un problema colectivo determinado por procesos sociales. Define la enfermedad como manifestación de dichos procesos sociales que afectan las relaciones entre huésped, agente y ambiente. El objeto de estudio son grupos construidos por características sociales más que biológicas.
The passage discusses the importance of summarization for processing large amounts of text data. It notes that automatic summarization systems aim to condense long documents into shorter summaries while maintaining the most important concepts and entities. The challenges of building such systems include identifying the most salient pieces of information, organizing them coherently, and presenting the summary using natural language.
Margaret Mead was an influential 20th century anthropologist who studied how culture and environment shape human behavior and development. Her most famous work, Coming of Age in Samoa, analyzed the transition to adulthood in Samoan society and found that Samoan adolescents experienced less stress and conflict compared to American youth. However, Mead's work has also faced criticism for potentially misrepresenting Samoan culture. Overall, Mead was an early proponent of the view that gender roles and social norms are culturally determined rather than biologically fixed.
Electronic channels involve using the internet to reach end users and allow consumers to buy online. They are used for both business-to-business and business-to-consumer transactions. While electronic channels provide advantages like convenience of 24/7 purchasing and access to a wide selection of products, they also present challenges like security concerns, difficulties returning products, potential stock outs or delivery delays, and higher shipping costs compared to brick-and-mortar stores. Electronic channels can also cause conflicts with traditional retail channels if not properly coordinated between manufacturers, online retailers, and physical stores.
Prophecy Resource Corp. is focused on acquiring base and precious metal exploration properties in British Columbia. In 2008, the company conducted drilling programs at its Okeover copper-molybdenum property, located north of Powell River, BC. Drilling expanded the known mineralized area at the North Lake Zone and intersected intercepts grading up to 0.41% copper and 0.001% molybdenum over 12 meters. Prophecy has now earned a 60% interest in the Okeover property from Eastfield Resources Ltd. by spending over $1 million on exploration as required.
Prophecy Resource Corp is focused on acquiring base and precious metal exploration properties in British Columbia. It obtained an option to earn a 60% interest in the Okeover copper-molybdenum property from Eastfield Resources Ltd. Prophecy conducted drilling programs at Okeover in 2007 and 2008 that expanded the known mineralized area at the North Lake Zone, with highlights including 45.5 meters grading 0.33% copper. Prophecy has now earned a 60% interest in the Okeover property by spending over $1 million in exploration and intends to form a joint venture with Eastfield for further exploration and development.
- Prophecy Resource Corp. released unaudited financial statements for the quarter ended December 31, 2006. The statements have not been reviewed by an auditor.
- During the quarter, the company reported a net loss of $60,207 and ended with $135,119 in cash. The loss was primarily due to $55,304 in stock-based compensation for management fees.
- Cash flows included $4,822 used for deferred exploration costs and $19,000 used for deferred finance fees, while $4,833 was received from related parties.
This document provides the financial statements for Prophecy Resource Corp. as of September 30, 2008. It includes a balance sheet showing total assets of $1,355,633 including cash, investments, and mineral property assets, as well as total liabilities of $105,053 and shareholders' equity of $1,250,580. It also includes statements of operations showing a net loss of $75,326 for the year, comprehensive loss, and deficit, as well as statements of cash flows showing cash used by operating and investing activities and provided by financing activities. Notes to the financial statements provide additional details on nature of operations, accounting policies, and related party transactions.
This document provides information about a diploma in educational leadership and management from Dar-e-Arqam School in Abbottabad, Pakistan. The diploma aims to equip students with knowledge of educational management and leadership, enable them to apply research and theory to improve their institutions, and allow professional development through reflection. The document outlines several topics that will be covered in the program, including leadership styles, building a conducive learning environment, managing co-curricular activities, human resource management, and developing a strategic vision.
Prophecy Resource Corp.'s unaudited interim financial statements for the period ending June 30, 2008 show that the company had a net loss of $41,609. Assets included $16,137 in cash, $280,000 in short-term investments, and $1,046,240 in deferred exploration costs. Liabilities were $84,873 including $83,879 owed to related parties. Shareholders' equity was $1,243,731 with share capital of $1,352,176 and a deficit of $303,410.
Prophecy Resource Corp is focused on acquiring and exploring base and precious metal properties in British Columbia.
In the first quarter of 2008, the company spent $13,798 exploring its primary property, the Okeover copper-molybdenum
project. Exploration at Okeover in 2007 included expanding the existing North Lake resource zone through drilling and
discovering a new zone of mineralization at the South Breccia area through drilling. Prophecy plans to continue expanding
resources at North Lake and exploring the potential of the South Breccia discovery through additional drilling in 2008. As a
junior exploration company, Prophecy's level of operations is determined by its available
When sixteen year old Claire Wallhart discovers that she is a Night Hunter, her world is turned upside down. With the help of her instructor. Erik, she will fight off the evil creatures of the night in order to protect all man kind.
Charlotte Sale on her experiences on 'Britain's Next Big Thing', from the Hid...Hidden Art
Charlotte Sale on her experiences taking part in the TV programme 'Britain's Next Big Thing' and selling her products to Liberty, taken from the Hidden Art Forum 2011: Making Sales
This document contains a Bahasa Melayu exam with multiple sections. Section A contains an image and instructions to write 5 sentences describing the bus stop scene. Section B asks the student to choose one of three essay prompts and write a response of at least 80 words. The prompts are about a school carnival, ways to respect teachers, or an essay ending with a given sentence about realizing teachers care about students. Section C instructs the student to write 4 moral values learned from a given excerpt in under 50 words per value.
Rangkuman dokumen tersebut adalah:
1) Dokumen tersebut merupakan rancangan tahunan pendidikan seni visual untuk tingkatan 4 yang mencakupi berbagai bidang dan teknik seni rupa seperti menggambar, membuat corak, membentuk, dan membuat binaan;
2) Setiap minggu akan diajarkan satu bidang dan teknik tertentu beserta hasil pembelajaran, objektif, dan catatan yang terkait;
3) Pelajaran
Dokumen tersebut membahasikan pendekatan didik hibur dalam pengajaran bahasa Malaysia di sekolah. Ia menjelaskan konsep didik hibur, objektifnya, dan bagaimana aktiviti seperti nyanyian dan lakonan dapat digunakan untuk meningkatkan pembelajaran bahasa secara menyeronokan.
Gibbscam solution for mill/turn machinettehnologie
GibbsCAM is a CAM software solution for programming multitasking mill-turn CNC machines. It was founded in 1982 and acquired by Cimatron in 2008. GibbsCAM allows for integrated CAD data processing, machine simulation, and post-processing for multitasking mill-turn machines. It provides capabilities for multi-axis milling, turning, and live tooling operations to maximize productivity on multi-turret and multi-spindle machines.
The document describes a CNC training center concept in Timisoara, Romania. The training center would be a partnership between industry and the Polytechnic University of Timisoara. It would equip technical schools with modern CNC machine tools and technologies to inspire students to pursue careers in manufacturing. The goal is to address the shortage of skilled technicians in Romania by training students and workers through courses on CNC machining, programming, and CAD/CAM software. The training center would help connect educational institutions to industry and improve technical education programs.
This document describes a local initiative to establish a Computer Aided Manufacturing (CAM) program at a university. The program would [1] help students learn CAD/CAM software and CNC machining through classes and hands-on experience, [2] allow industry partners to demonstrate and test new tools and technologies, and [3] help train local industry workforce on advanced manufacturing processes. The university plans to create a new research center with CNC machine tools, CAD/CAM software, and support from industry partners to develop skilled technicians and connect academic programs to real-world manufacturing needs.
The document summarizes an event called Demo Metal that will take place from May 30th to June 2nd, 2012 in Bucharest, Romania. The event will focus on the metalworking industry and feature demonstrations of metalworking machines, organization of the production process into levels, know-how transfer presentations, networking opportunities, and communication between exhibitors and visitors. The goal is to attract professionals in industries like automotive, engineering, and aerospace to see the latest products and trends and develop business partnerships. The event aims to efficiently showcase relevant suppliers and maximize opportunities for contact between attendees.
Kaeser Kompressoren is a family-owned German company established in 1919. It is a global leader in compressed air systems, known for its premium, energy-efficient compressors, blowers, dryers and other compressed air products manufactured in Germany. The document outlines Kaeser's extensive product portfolio, engineering and consultation services, and comprehensive global service network, establishing it as an expert partner for efficient compressed air solutions.
Prezentare sisteme complete pentru robotizari de sudare
1. Bine ati venit la Dinse – Sisteme de sudare
Specialistul dvs. in aplicatiile de sudare
29.05.2012 DEMO METAL 2012 1
2. Dinse – Sisteme complete de sudare
„Sisteme complete pentru
automatizari / robotizari de
sudare“
DEMO METAL
31.05.2012
29.05.2012 DEMO METAL 2012 2
3. Dinse – Sisteme complete de sudare
Sumar prezentare:
► Date tehnice generale ale surselor de sudare
► Procese de sudare
► Torte de sudare pentru diverse aplicatii
► Accesorii sudare
29.05.2012 DEMO METAL 2012 3
4. Dinse – Sisteme complete de sudare
Date tehnice invertoare
sudare DIX PI
29.05.2012 DEMO METAL 2012 4
5. Invertor sudare DIX PI
Componenta de baza: „Modulul Invertor“
-Primary Clocked Inverter-
29.05.2012 DEMO METAL 2012 5
6. Invertor sudare DIX PI
Schema constructiva a sistemului
Bloc invertor 1-DSP*
Bloc invertor 2-DSP*
Unitate de
control a
puterii
DSP* *DSP=Digital Signal Processor
Unitate racire
Unitatea Derulator sarma
Telecomanda
principala de DSP*
Interfete control
Interfata robotizata
29.05.2012 DEMO METAL 2012 6
7. Invertor sudare DIX PI
Date tehnice Gama DIX PI
270 400 500 600
Plaja curent 5-270A 5-390 A 5-500A 5-600A
Curent sudare la 40 % DC 270A 380 A >500A 600A
Curent sudare la 60 % DC 230A 350 A 500A 590A
Curent sudare la 100 % DC 190A 310 A 450A 500A
Bloc invertor / Module invertoare 1/1 1/2 2/3 2/4
Greutatea (aproximativa) 42kg 43 kg 59kg 60kg
Alimentare electrica 3/PE AC 400 V
-20% / +25%
Tolerante ridicate pentru tensiunea de alimentare
datorita utilizarii PFC (power factor correction)
29.05.2012 DEMO METAL 2012 7
8. Invertor sudare DIX PI
Principalele componente ale sursei DIX PI
Placa comanda Interfata automatizare
derulator sarma
WFC DVC/DVE
Placa optionala Placa principala de
pentru aplicatii Push- control
Pull WFC WF-PP
Module invertoare
Unitate de racire cu
lichid
29.05.2012 DEMO METAL 2012 8
9. Invertor sudare DIX PI
Design-ul mecanic optimizat
permite:
► Obtinerea unui debit optimizat de
aer pentru racirea sursei
► Reducerea cantitatii de praf care
intra in interiorul sursei, aerul
circuland numai prin fantele speciale
din blocurile de aluminiu
► Instalarea in imediata apropiere a
unui perete
► Realizarea unor blocuri invertoare
simetrice
► Separarea unitatii de control si
invertorului
29.05.2012 DEMO METAL 2012 9
10. Invertor sudare DIX PI
Telecomanda DIX RP 100E permite:
► Alegerea procesului
► Alegerea materialului
► Alegerea diametrului sarmei
► Alegerea tipului de gaz
► Lucrul cu job-urile
► Afisarea pe display a
caracteristicilor speciale si
utilizarea sau modificarea lor
► Lucrul cu meniul sistemului
► Functii de baza
► Acces nivel utilizator pe baza
de cheie hardware
► Afisare mesaje eroare
► Conectarea/deconectarea in
timpul operarii sursei
29.05.2012 DEMO METAL 2012 10
11. Invertor sudare DIX PI
Unitate de racire cu lichid DIX CM1200/5 si CM1500/5 CAN:
► Pompa de racire de
calitate
► Conexiune Bus cu
sistem de masurare a
temperaturii si debitului de
lichid de racire (optional)
► Adaptare rapida prin
intermediul CAN-Bus, cu
modul de detectie
automata (optional).
► Buton circulare lichid
► Capacitate rezervor 5l
► Putere pompa 1,2/1,5
kW conform EN 60974-2
29.05.2012 DEMO METAL 2012 11
12. Invertor sudare DIX PI
Derulatoare sarma WF
Derulator sarma DIX WF50 (110) SE-R/L
Derulator sarma pentru roboti Hollow
Wrist DIX WF50 (110) HR-R/L
29.05.2012 DEMO METAL 2012 12
13. Invertor sudare DIX PI
Interfete robotizare: Concept operational
Analogice si digitale Telecomanda
pentru retrofitinguri si
In timpul functionarii
automatizari de baza
sursei este posibila
cu cablaj discret
montarea/demontarea
Sisteme industriale telecomenzii
field bus si :
Profibus
DeviceNet
Software PC:
CANopen
Editor Job-uri
Ethernet IP
Managementul Job-
EtherCAT ... urilor
Interfata USB: Monitorizarea
Stick USB: sistemului
Incarcare/Salvare date Editare caracteristici
fara ajutorul PC-ului sudare (Nivelul
Expert)
29.05.2012 DEMO METAL 2012 13
15. Invertor sudare DIX PI
Procese si caracteristici de sudare disponibile
Standard (pana la 100 caracteristici diferite):
► FE (G2Si1 – G4Si1); ø sarma 0,8/1,0/1,2/1,6 mm; gaz protectie Ar82/CO218
► AlSi5; ø sarma 1,0/1,2/1,6 mm; gaz protectie Ar4.6
► AlMg3; ø sarma 1,0/1,2/1,6 mm; gaz protectie Ar4.6
► CrNi; ø sarma 0,8/1,0/1,2/1,6 mm; gaz protectie Ar98/CO2
► Caracteristici I/I (in curent pulsat)
29.05.2012 DEMO METAL 2012 15
16. Invertor sudare DIX PI
Procese si caracteristici de sudare disponibile
Caracteristici speciale (sunt posibile pana la 100
caracteristici diferite):
► RMT = Spray arc special
► HC MAG = Short arc special
► Brazare MIG
► Caracteristici U/I (in curent pulsat)
► Caracteristici standard optimizate/customizate
► Alte caracteristici
29.05.2012 DEMO METAL 2012 16
17. RMT – Rapid MIG/MAG Technology
► Un nou proces obtinut prin deplasarea
spray arc-ului conventional intr-o zona cu o
mai mica rezistenta electrica
► Arc electric extrem de bine focalizat si
foarte stabil, cu o putere cu circa 10% mai
mare la aceeasi viteza de avans a sarmei
(rata de depunere)
► Lungimea arcului ramane aceeasi ca in
cazul spray arc-ului conventional
► O mult mai buna patrundere
► Mai putine treceri in cazul sudurilor
multistrat prin reducerea unghiului de
sanfrenare
► In functie de aplicatie se pot obtine viteze
mai mari de sudare
► Disponibil pentru sudarea otelului carbon,
inoxului si aluminiului.
29.05.2012 DEMO METAL 2012 17
18. RMT – Rapid MIG/MAG Technology
DIX PI 400:
► Material: otel carbon
► Grosime: 6 mm
► Corgon 82/18
► Curent: 300A
► Viteza de avans sarma: 11 m/min
► Viteza de sudare: 530 mm/min
► Pozitia tortei: Impins
► Fara sanfrenare
DIX PI 400:
► Material: otel carbon
► Grosime: 8 mm
► Corgon 82/18
► Curent: 300A
► Viteza de avans sarma: 11 m/min
► Viteza de sudare: 530 mm/min
► Pozitia tortei: Tras
► Fara sanfrenare
29.05.2012 DEMO METAL 2012 18
19. RMT – Rapid MIG/MAG Technology
DIX PI 500:
► Material: otel inalt aliat
► Grosime:10 mm
► Corgon 98/2
► Curent: 335A
► Viteza avans sarma: 14 m/min
► Pozitie torta: Tras
► Fara sanfrenare
RMT permite simplificarea operatiilor de pregatire a
imbinarilor:
► Unghi de sanfrenare de 30° in loc de 45°
► Mai putine treceri in cazul aplicatiilor de sudare
multistrat, rezultatul fiind reducerea timpilor de productie
► Reducerea deformatiilor termice
29.05.2012 DEMO METAL 2012 19
20. Dinse – Sisteme complete de sudare
Torte si solutii pentru sudare robotizata
29.05.2012 DEMO METAL 2012 20
21. Dinse – Sisteme complete de sudare
Un echipament – Doua tehnologii de sudare
TIG sau MIG/MAG – singurul lucru care se echimba este gatul de lebada.
Toate celelalte componente ale tortei raman neschimbate.
Sistem dublu separabil cu
Sistem dublu separabil cu
motor pentru aplicatii
motor pentru aplicatii
PUSH-PUSH / PUSH-PULL
PUSH-PUSH / PUSH-PULL
DIX MEPTTZ 600 SAZ
DIX MEPTTZ 600 SAZ
DIX TETZ 400 KD
DIX METZ 544
29.05.2012 DEMO METAL 2012 21
22. REVO.torch – torta cu rotatie infinita
Singura solutie existenta pe piata atat in varianta racita cu lichid cat si
in cea racita cu gaz
Interfata rotativa Dinse transmite lichidul de racire, curentul de sudare,
gazul de protectie si aerul comprimat.
• Rotatie nelimitata
• Set cabluri protejat impotriva
rasucirii
• Sistem dublu separabil
• Plaja de deviatie, in caz de
coliziune, de pana la 15°
• Optiune: modul protectie
anticoliziune integrat in derulator
sau extern
29.05.2012 DEMO METAL 2012 22
23. REVO.torch – torta cu rotatie infinita
DINSE REVO.torch
Este adecvata robotilor Hollow Wrist cu interfata
rotativa si poate fi racita cu gaz sau cu lichid
Alimentarea separata cu gaz de protectie reduce
pierderile de gaz si permite inceperea operatiei de
sudare imediat dupa purjare
Flexibilitate deosebita pentru o excelenta
accesibilitate
Consumabile DINSE standard pentru o utilizare
economica
29.05.2012 DEMO METAL 2012 23
24. REVO.torch – torta cu rotatie infinita
Optional:
Senzor anticoliziune DIX REMO 101
Instalare externa
Tehnologie patentata de catre DINSE
Functionare pneumatica – switch electric
Functioneaza cu gaz de protectie
29.05.2012 DEMO METAL 2012 24
25. ECO.torch – torta cu rotatie limitata ± 260⁰
Sunt disponibile doua versiuni atat in cazul tortelor
racite cu gaz cat si in cel al tortelor racite cu lichid:
► Versiunea rigida (S)
► Versiunea flexibila cu o plaja de deviatie de 15° (F)
Optional: Modul anticoliziune pentru oprirea imediata a
robotului in cazul unei nedorite coliziuni
29.05.2012 DEMO METAL 2012 25
26. ECO.torch – torta cu rotatie limitata ± 260⁰
Robustete exceptionala:
► fascicul cabluri rezistent la torsiune
► uzura redusa
► durata lunga de viata
► intervale lungi de mentenanta
Optimizarea procesului:
► rotatia pe axa a 6-a reduce costurile de programare
► accesibilitate optima la piesele de sudat
► senzor pentru detectia pieselor prin intermediul calotei
de gaz
29.05.2012 DEMO METAL 2012 26
27. ECO.torch – torta cu rotatie limitata ± 260⁰
Fascicul cabluri, DIX RET 320 – x, racire
cu gaz
► Schimbare liner pe la partea frontala
► Furtunul separat pentru alimentarea cu
gaz de protectie alimina pierderile de gaz si
permite reinceperea sudarii imediat dupa
purjare, fara a se mai pierde timp
Fascicul cabluri, DIX RETZ 620 – x, racire cu
lichid
► Schimbare liner pe la partea frontala
► Furtunul separat pentru alimentarea cu
gaz de protectie alimina pierderile de gaz
si permite reinceperea sudarii imediat
dupa purjare
► Lichidul de racire circula prin intregul gat
de lebada
► Duza de contact si calota de gaz sunt
racite in paralel
29.05.2012 DEMO METAL 2012 27
28. Gaturi de lebada standard METZ
„Luati conducerea prin calitate.“
Calitatea Premium DINSE
Circuit dublu foarte eficient pentru racirea cu
lichid
Productivitate ridicata
Constructie robusta
Stoc minimizat de consumabile
29.05.2012 DEMO METAL 2012 28
29. Gaturi de lebada standard METZ
Consumabilele
29.05.2012 DEMO METAL 2012 29
30. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
29.05.2012 DEMO METAL 2012 30
31. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
29.05.2012 DEMO METAL 2012 31
32. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
Calota gaz
Lungimea optima (nici prea scurta si nici prea lunga) asigura cea mai
buna rezistenta electrica posibila in arc
Forma optima asigura un debit constant de gaz si o excelenta
protectie a baii.
29.05.2012 DEMO METAL 2012 32
33. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
Izolator
Insertie izolatoare pentru protectia contra intoarcerii
arcului electric
29.05.2012 DEMO METAL 2012 33
34. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
Duza contact
Potrivire perfecta pentru obtinerea unui transfer de
putere optim
Aliaje selectate in scopul minimizarii uzurii
29.05.2012 DEMO METAL 2012 34
35. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
Adaptor duza contact
Permite schimbarea facila a duzei de contact chiar si
dupa foarte multe aplicatii de sudare
29.05.2012 DEMO METAL 2012 35
36. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
Difuzor gaz
Distributia optima a gazului in interiorul calotei de gaz
asigura un debit constant si o excelenta protectie a baii.
29.05.2012 DEMO METAL 2012 36
37. Gaturi de lebada standard METZ
Difuzor gaz
Adaptor duza contact
Duza contact
Izolator
Calota gaz
29.05.2012 DEMO METAL 2012 37
39. Gaturi de lebada standard METZ
Turul lichidului de racire
Returul lichidului de racire
Liner sarma
Gaz protectie
29.05.2012 DEMO METAL 2012 39
40. Gaturi de lebada standard METZ
DIX METZ 52x
Gaturi lebada: 0° DIX METZ 520
22° DIX METZ 522
45° DIX MFTZ 524
CO2 : 350A / 100% ED
Corgon: 300A / 100% ED
Diametru sarma: 0,8 – 1,2 mm
29.05.2012 DEMO METAL 2012 40
41. Gaturi de lebada standard METZ
DIX METZ 52x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 68 mm Ø 6 x 35 mm M6 plastic
DI = 9 mm M 6 x 28 mm
DI = 12 mm
DI = 15 mm
29.05.2012 DEMO METAL 2012 41
42. Gaturi de lebada standard METZ
DIX METZ 52x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 68 mm Ø 6 x 35 mm M6 plastic
DI = 9 mm M 6 x 28 mm
DI = 12 mm
DI = 15 mm
29.05.2012 DEMO METAL 2012 42
43. Gaturi de lebada standard METZ
DIX METZ 52x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 68 mm Ø 6 x 35 mm M6 plastic
DI = 9 mm M 6 x 28 mm
DI = 12 mm
DI = 15 mm
29.05.2012 DEMO METAL 2012 43
44. Gaturi de lebada standard METZ
DIX METZ 52x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 68 mm Ø 6 x 35 mm M6 plastic
DI = 9 mm M 6 x 28 mm
DI = 12 mm
DI = 15 mm
29.05.2012 DEMO METAL 2012 44
45. Gaturi de lebada standard METZ
DIX METZ 52x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 68 mm Ø 6 x 35 mm M6 plastic
DI = 9 mm M 6 x 28 mm
DI = 12 mm
DI = 15 mm
29.05.2012 DEMO METAL 2012 45
46. Gaturi de lebada standard METZ
DIX METZ 52x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 68 mm Ø 6 x 35 mm M6 plastic
DI = 9 mm M 6 x 28 mm
DI = 12 mm
DI = 15 mm
29.05.2012 DEMO METAL 2012 46
47. Gaturi de lebada standard METZ
DIX METZ 59x
Gaturi lebada: 0° DIX METZ 590
22° DIX METZ 592
45° DIX METZ 594
CO2 : 400A / 100% ED
Corgon: 350A / 100% ED
Diametru sarma: 0,8 – 1,2 mm
29.05.2012 DEMO METAL 2012 47
48. Gaturi de lebada standard METZ
DIX METZ 59x
Calota gaz: Duza contact: Difuzor gaz: Adaptor duza:
L = 46 mm M 6 x 28 mm plastic M6
M 8 x 28 mm M8
DI = 15 mm
29.05.2012 DEMO METAL 2012 48
49. Gaturi de lebada standard METZ
DIX METZ 59x
Calota gaz: Duza contact: Difuzor gaz: Adaptor duza:
L = 46 mm M 6 x 28 mm plastic M6
M 8 x 28 mm M8
DI = 15 mm
29.05.2012 DEMO METAL 2012 49
50. Gaturi de lebada standard METZ
DIX METZ 59x
Calota gaz: Duza contact: Difuzor gaz: Adaptor duza:
L = 46 mm M 6 x 28 mm plastic M6
M 8 x 28 mm M8
DI = 15 mm
29.05.2012 DEMO METAL 2012 50
51. Gaturi de lebada standard METZ
DIX METZ 59x
Calota gaz: Duza contact: Difuzor gaz: Adaptor duza:
L = 46 mm M 6 x 28 mm plastic M6
M 8 x 28 mm M8
DI = 15 mm
29.05.2012 DEMO METAL 2012 51
52. Gaturi de lebada standard METZ
DIX METZ 59x
Calota gaz: Duza contact: Difuzor gaz: Adaptor duza:
L = 46 mm M 6 x 28 mm plastic M6
M 8 x 28 mm M8
DI = 15 mm
29.05.2012 DEMO METAL 2012 52
53. Gaturi de lebada standard METZ
DIX METZ 54x
Gaturi lebada: 0° DIX METZ 540
22° DIX METZ 542
45° DIX METZ 544
CO2 : 450A / 100% ED
Corgon: 400A / 100% ED
Diametru sarma: 1,0 – 1,6 mm
29.05.2012 DEMO METAL 2012 53
54. Gaturi de lebada standard METZ
DIX METZ 54x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 76 mm Ø 8 x 45 mm M6 plastic
M8
DI = 13 mm M 6 x 28 mm
DI = 15 mm M 8 x 28 mm
DI = 18 mm
29.05.2012 DEMO METAL 2012 54
55. Gaturi de lebada standard METZ
DIX METZ 54x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 76 mm Ø 8 x 45 mm M6 plastic
M8
DI = 13 mm M 6 x 28 mm
DI = 15 mm M 8 x 28 mm
DI = 18 mm
29.05.2012 DEMO METAL 2012 55
56. Gaturi de lebada standard METZ
DIX METZ 54x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 76 mm Ø 8 x 45 mm M6 plastic
M8
DI = 13 mm M 6 x 28 mm
DI = 15 mm M 8 x 28 mm
DI = 18 mm
29.05.2012 DEMO METAL 2012 56
57. Gaturi de lebada standard METZ
DIX METZ 54x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gas:
L = 76 mm Ø 8 x 45 mm M6 plastic
M8
DI = 13 mm M 6 x 28 mm
DI = 15 mm M 8 x 28 mm
DI = 18 mm
29.05.2012 DEMO METAL 2012 57
58. Gaturi de lebada standard METZ
DIX METZ 54x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 76 mm Ø 8 x 45 mm M6 plastic
M8
DI = 13 mm M 6 x 28 mm
DI = 15 mm M 8 x 28 mm
DI = 18 mm
29.05.2012 DEMO METAL 2012 58
59. Gaturi de lebada standard METZ
DIX METZ 54x
Calota gaz: Izolator: Duza contact: Adaptor duza: Difuzor gaz:
L = 76 mm Ø 8 x 45 mm M6 plastic
M8
DI = 13 mm M 6 x 28 mm
DI = 15 mm M 8 x 28 mm
DI = 18 mm
29.05.2012 DEMO METAL 2012 59
60. Gaturi de lebada standard METZ
DIX METZ 57x
Gaturi lebada: 0° DIX METZ 570
22° DIX METZ 572
45° DIX METZ 574
CO2 : 550A / 100% ED
Corgon: 500A / 100% ED
Diametru sarma: 1,2 – 2,0 mm
29.05.2012 DEMO METAL 2012 60
61. Gaturi de lebada standard METZ
DIX METZ 57x
Calota gaz: Duza contact: Difuzor gaz:
L = 65 mm M 8 x xx mm ceramic
DI = 17 mm
29.05.2012 DEMO METAL 2012 61
62. Gaturi de lebada standard METZ
DIX METZ 57x
Calota gaz: Duza contact: Difuzor gaz:
L = 65 mm M 8 x xx mm ceramic
DI = 17 mm
29.05.2012 DEMO METAL 2012 62
63. Gaturi de lebada standard METZ
DIX METZ 57x
Calota gaz: Duza contact: Difuzor gaz:
L = 65 mm M 8 x xx mm ceramic
DI = 17 mm
29.05.2012 DEMO METAL 2012 63
64. Gaturi de lebada standard METZ
DIX METZ 57x
Calota gaz: Duza contact: Difuzor gaz:
L = 65 mm M 8 x xx mm ceramic
DI = 17 mm
29.05.2012 DEMO METAL 2012 64
65. Gaturi de lebada MFTZ
Retrofit simplu
Pentru echipamentele dvs. existente
furnizam gaturi de lebada perfect
compatibile. Acestea sunt realizate folosindu-
se cele mai bune materiale si tehnologii.
Schimbarea poate fi realizata rapid: pur si
simplu conectati gatul de lebada la torta
existenta si incepeti sudarea – TCP-ul
ramane neschimbat.
29.05.2012 DEMO METAL 2012 65
66. Gaturi de lebada MFTZ
Productivitate deosebita
Circuitul dublu pentru racire cu lichid permite
evacuarea unei mari cantitati de caldura,
oferind tortei posibilitatea de a lucra la puteri
mari si durate active ridicate – fapt ce
asigura beneficii economice deosebite.
29.05.2012 DEMO METAL 2012 66
67. Gaturi de lebada MFTZ
Reprezentare grafica fara consumabile
si piese de schimb
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
29.05.2012 DEMO METAL 2012 67
68. Gaturi de lebada MFTZ
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
Conexiuni alimentare
Toate mediile de alimentare sunt aduse
separat la destinatie
29.05.2012 DEMO METAL 2012 68
69. Gaturi de lebada MFTZ
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
Piulita de fixare
Garanteaza o pozitionare fixa si precisa a
gatului de lebada astfel incat se asigura
transmiterea in siguranta a curentului de
sudare.
29.05.2012 DEMO METAL 2012 69
70. Gaturi de lebada MFTZ
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
Unitatea de deviere
Pentru a garanta cunoscuta calitate DINSE
a gaturilor de lebada trebuie sa aducem
canalele de alimentare pe drumul cel bun.
29.05.2012 DEMO METAL 2012 70
71. Gaturi de lebada MFTZ
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
Tubul exterior
Permite circulatia lichidului de racire pana
la calota de gaz
29.05.2012 DEMO METAL 2012 71
72. Gaturi de lebada MFTZ
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
Manson calota gaz
Garanteaza o asezare optima a calotei de
gaz
29.05.2012 DEMO METAL 2012 72
73. Gaturi de lebada MFTZ
Unitatea de alimentare
Piulita de fixare
Unitatea de deviere
Tubul exterior
Manson calota gaz
Tub interior
Tubul interior
Permite circulatia lichidului de racire pana
la duza de gaz
29.05.2012 DEMO METAL 2012 73
74. Sistem de sudare Tandem
De ce sa utilizam tehnologia Tandem?
Numarul mare de posibilitati determina o
adaptare flexibila a arcului, a procesului de
topire si a adancimii de penetrare in functie de
fiecare aplicatie
Permite utilizarea a doua tipuri independente
de electrozi intr-un singur proces
Permite obtinerea unei mari productivitati
Doua potentiale diferite intr-o singura baie de
metal topit
Compatibil cu toate tipurile de surse
29.05.2012 DEMO METAL 2012 74
75. Sistem de sudare Tandem
Aplicatii:
Sudura de colt
Tehnologie PUSH-PULL pentru
alimentarea cu sarma
Doua sarme in acelasi arc
Adancime mare de penetrare
Excelenta umplere a rostului
29.05.2012 DEMO METAL 2012 75
76. Sistem de sudare Tandem
Caracteristica arcului
Viteza mare de sudare
Rata de depunere mare
Suprafata curata a cordonului de
sudura
Arcul mai lung reduce cantitatea de
stropi
29.05.2012 DEMO METAL 2012 76
77. Sistem de sudare Tandem
Componentele sistemului
Usor, robust si complet protejat datorita
carcasei din plastic
Compatibil cu toate sursele de sudare
existente pe piata
Derulator robust cu un cuplu de pornire
ridicat si caracteristici excelente pentru
alimentarea cu sarma
Torta racita cu lichid, prevazuta cu canale
separate pentru racirea directa a calotei
de gaz
29.05.2012 DEMO METAL 2012 77
78. Dinse - solutii speciale la cheie
Torte si gaturi de lebada proiectate in
functie de aplicatiile utilizatorului
29.05.2012 DEMO METAL 2012 78
80. Reductor gaz ECO.flow
Reductorul DINSE ECO.flow
nu realizeaza doar o
economie substantiala de
gaz de protectie ci permite
si imbunatatirea calitatii
sudurii.
Salvati gaz! … alegerea ECOnomica
29.05.2012 DEMO METAL 2012 80
81. Reductor gaz ECO.flow
Avantaje si beneficii
Reductor de gaze cu reglare in trepte,
cu economizor si debitmetru
incorporate.
Permite reducerea consumului de gaz
de protectie cu pana la 50%
Amortizare rapida a investitiei – in mai
putin de 6 luni
Garanteaza un debit de gaz stabil,
eliminand porozitatile si imbunatatind
astfel calitatea cordoanelor de sudura.
29.05.2012 DEMO METAL 2012 81
82. Reductor gaz ECO.flow
Reducere costuri
Testati-l chiar dumneavoastra! Care este economia pe care o veti realiza?
29.05.2012 DEMO METAL 2012 82
83. Dispozitiv blocare sarma DIX WB 1 / 2
De ce un sistem de blocare pentru
sarma?
Necesitatea utilizatorilor de a avea o mai
buna precizie
O mai buna determinare a lungimii
cordoanelor de sudura
Cordoane reproductibile
Alimentare controlata cu sarma
Identificarea punctelor de sudare prin
utilizarea senzorului tactil
29.05.2012 DEMO METAL 2012 83
84. Dispozitiv blocare sarma DIX WB 1 / 2
Avantajele dispozitivului de blocare
a sarmei:
Determinarea precisa a
cordonului si pozitiei acestuia
Lungime constanta a capatului
liber al sarmei in timpul
deplasarilor robotului fara a suda
Flexibil pentru toate aplicatiile
Permite utilizarea a diverse
calitati si diametre de sarma, de
la 0,8 – 2,4 mm.
29.05.2012 DEMO METAL 2012 84
85. Dispozitiv blocare sarma DIX WB 1 / 2
Poate fi utilizat pentru toate tipurile de
torte robotizate, atat mono separabile
cat si dublu separabile
Dispozitiv blocare WB 1 pentru sarme
cu diametre intre 0,8 – 1,6 mm
Dispozitiv blocare WB 2 pentru sarme
cu diametre intre 1,8 – 2,4 mm
Posibilitatea de inlocuire a tortelor
existente cu torte cu sistem de blocare
a sarmei integrat.
29.05.2012 DEMO METAL 2012 85
86. Dispozitiv blocare sarma DIX WB 1 / 2
Functionarea dispozitivului
de blocare:
29.05.2012 DEMO METAL 2012 86
87. Dispozitiv blocare sarma DIX WB 1 / 2
Componentele sistemului de
blocare:
Dispozitiv blocare sarma
Adaptor
Tub ghidare
29.05.2012 DEMO METAL 2012 87
88. Senzor anticoliziune SAS
Cu o plaja de deviatie de 20°,
senzorii anticoliziune DINSE ofera o
excelenta protectie impotriva
coliziunilor.
Intreruperea rapida in cazul unei
coliziuni si reintoarcerea automata,
foarte precisa a TCP-ului asigura o
utilizare complet lipsita de probleme.
29.05.2012 DEMO METAL 2012 88
89. Senzor anticoliziune SAS
DIX SAS 100/200
Acuratete de resetare
ridicata
+/- 0,03 mm
Plaja de deviatie 20°
Oprire de urgenta a
robotului foarte rapida.
29.05.2012 DEMO METAL 2012 89
92. Senzor anticoliziune SAS
Date tehnice:
Cuplul de intrerupere: 14,5 Nm (in functie de tipul
de senzor)
Plaja de reactie: 1° - 3°
Deviatia maxima: 20°
max. 140 mm pe baza unei
lungimi de 500 mm.
29.05.2012 DEMO METAL 2012 92
93. Dispozitive de verificare si recalibrare
Dispozitiv de verificare si recalibrare PV 100/ PV 150
Destinat verificarii si recalibrarii gaturilor de lebada
standard.
Dispozitiv de verificare PV 200/ PV 250
Destinat verificarii intregului ansamblu: torta,
suport si senzor
29.05.2012 DEMO METAL 2012 93
94. Dispozitive de verificare si recalibrare
Dispozitivul foarte precis de verificare si recalibrare asigura
o calitate ridicata a sudurii. Acesta este realizat dintr-un
aliaj de aluminiu de foarte buna calitate, avand o lunga
durata de exploatare si se utilizeaza pentru determinarea
foarte precisa a TCP-ului.
Permit testarea gaturilor de lebada standard in scopul
verificarii si ajustarii paralelismului si concentricitatii
tubului interior, tubului exterior si duzei de contact.
Dispozitiv ajustabil, prevazut cu gauri de fixare standard
pentru gaturile de lebada (pentru unghiuri de 0°/22°/45°).
Modulul de calibrare permite reajustarea tubului
interior si a celui exterior pentru obtinerea
concentricitatii acestora.
29.05.2012 DEMO METAL 2012 94
95. Dispozitive de verificare si recalibrare
Set calibrare JS 350/520 pentru MET35x si METZ52x
Modul calibrare JM 100 (pentru PV 100 si PV 150) Set calibrare JS 540 pentru METZ 54x
Set calibrare JS 560 pentru METZ 56x
Set calibrare JS 390/590
pentru MET 39x respectiv METZ 59x
29.05.2012 DEMO METAL 2012 95
96. Dinse – Sisteme complete de sudare
Dorim sa devenim partenerul dvs. pentru
intregul proces de sudare!
Va multumim pentru atentia acordata!
29.05.2012 DEMO METAL 2012 96
97. Dinse – Sisteme complete de sudare
Pentru orice intrebari si informatii va
asteptam la standurile nr. 47 si 50
29.05.2012 DEMO METAL 2012 97