The document defines preventive maintenance as maintenance activities performed to prevent equipment failures from occurring. This includes regularly scheduled inspections, tests, and repairs to replace worn components before they fail. The goal is to preserve equipment reliability and avoid consequences of unexpected breakdowns. Key aspects mentioned include systematic checks to detect early issues, addressing problems before they become major defects, and proactively replacing parts based on deterioration records.

2. Preventive maintenance (PM) has the following meanings:
The care and servicing by personnel for the purpose of maintaining equipment and facilities in
satisfactory operating condition by providing for systematic inspection, detection, and
correction of incipient failures either before they occur or before they develop into major
defects.
Maintenance, including tests, measurements, adjustments, and parts replacement, performed
specifically to prevent faults from occurring.
The primary goal of maintenance is to avoid or mitigate the consequences of failure of
equipment. This may be by preventing the failure before it actually occurs which Planned
Maintenance and Condition Based Maintenance help to achieve. It is designed to preserve and
restore equipment reliability by replacing worn components before they actually fail. Preventive
maintenance activities include partial or complete overhauls at specified periods, oil changes,
lubrication and so on. In addition, workers can record equipment deterioration so they know to
replace or repair worn parts before they cause system failure. The ideal preventive maintenance
program would prevent all equipment failure before it occurs.
DEFINITION OF PREVENTIVE MAINTENANCE

3. TYPE OF COMPUTER PROBLEM

4. SOFTWARE

5. Below are links to information on individual STOP errors including what each STOP code means and any troubleshooting information I have on that
STOP error. I highly recommend checking for specific information on your particular STOP code firstTip: All STOP codes below are listed in order -
see How To Count in Hexadecimal for help. You may also search for the STOP code at the top of this page.
STOP Error 0x00000001 to STOP Error 0x0000005F
Complete list of STOP codes from STOP error 0x1 (0x00000001) to STOP error 0x5F (0x0000005F).
STOP Error 0x00000060 to STOP Error 0x000000BF
Complete list of STOP codes from STOP error 0x60 (0x00000060) to STOP error 0xBF (0x000000BF).
STOP Error 0x000000C1 to STOP Error 0x0000011D
Complete list of STOP codes from STOP error 0xC1 (0x000000C1) to STOP error 0x11D (0x0000011D).
STOP Error 0x00000121 to STOP Error 0xC0000221
Complete list of STOP codes from STOP error 0x121 (0x00000121) to STOP error 0xC0000221.
STOP Error 0xDEADDEAD: MANUALLY_INITIATED_CRASH1
STOP error 0xDEADDEAD means that the user deliberately initiated a crash dump from either the kernel debugger or the keyboard.
STOP code 0xDEADDEAD may also display "MANUALLY_INITIATED_CRASH1" on the same STOP message.
A Blue Screen of Death, also called a STOP Error, will appear when an issue is so serious that Windows must stop completely.
A Blue Screen of Death is usually hardware or driver related. Most BSODs show a STOP code that can be used to help figure out
the root cause of the Blue Screen of Death.
A Blue Screen of Death (BSOD), technically called a STOP error, occurs when Windows suffers a serious error and is forced to "stop" completely.
Since a blue screen error gives you no choice but to restart, troubleshooting one can be difficult. Luckily, almost every STOP error includes a STOP
code that can be used to research a fix.
BLUE SCREEN OF DEATH

6. There are few different ways that the "missing or corrupt hal.dll" error may present itself, with the first listing being the most common:
"Windows could not start because the following file is missing or corrupt:
<Windows root>system32hal.dll.
Please re-install a copy of the above file.""<Winnt_root>System32Hal.dll missing or corrupt:
Please re-install a copy of the above file."
"Cannot find WindowsSystem32hal.dll"
"Cannot find hal.dll"
The "missing or corrupt hal.dll" error displays shortly after the computer is first started. Windows XP has not yet fully loaded when this error
message appears.
Windows 8, 7, & Vista: Hal.dll errors in Windows 7, Windows 8, and Windows Vista are often a different issue entirely. See How To Fix Hal.dll Errors
in Windows 7, 8, and Vista for help.
Cause
Causes of the "missing or corrupt hal.dll" error include, naturally, a damaged hal.dll DLL file or a hal.dll file that has been deleted or moved
from its intended location.
Additional causes may include a damaged or missing boot.ini file or possibly a physically damaged hard drive.
MISSING OR CORRUPT hal.dll

7. PENDRIVE NOT DETECTED
After plugging in the device. Go to device manager (In run type "devmgmt.msc") In
Device manager go to "Universal serial bus controllers" It should list the storage
devices that you have connected to your PC. Right click and then click "Uninstall.
Remove the USB drive and restart your system.
Try connecting the device again, i think this should solve the problem.

8. HARDWARE

9. Right click on my computer and select manage.
You now have the computer management window open.
Beneath Services and Applications select services.
In the right pane, double click on Windows audio.
At the bottom service status should read Started.
If it says stopped, you found the problem click on start and enjoy!
SOUND CARD HAS STOPPED WORKING AFTER COUPLE OF TIME

10. Thank you