The document discusses local cycling policy in Delft, Netherlands. It notes that 26% of all transportation in Delft is by bicycle. It outlines the four pillars of Delft's cycling policy: 1) developing a comprehensive cycling network with grids at the city, district, and neighborhood level; 2) providing sufficient bicycle parking facilities; 3) prioritizing road safety; and 4) implementing school programs to promote safe cycling. The cycling network in Delft aims to make cycling fast, comfortable, and safe for trips between 1-5 km by creating a long-term interconnected vision and taking advantage of infrastructure projects to close missing links.
As it does every January, Atlas Van Lines reviews data on the origins and destinations of interstate moves during the last 12 months. The 2011 Migration Patterns study results provide a snapshot of relocation patterns, showing an overall increase in the number of moves over last year.
As it does every January, Atlas Van Lines reviews data on the origins and destinations of interstate moves during the last 12 months. The 2011 Migration Patterns study results provide a snapshot of relocation patterns, showing an overall increase in the number of moves over last year.
Introduction
The shaper machine is a machine that can make slots and grooves using a thin cutting tool. The linear cutting motion is provided by the “Whitworth Quick-Return Mechanism“. While the feed motion is supplied by the mechanism illustrated in this report "The shaper feed Mechanism”. During shaping, cutting and infeed motions are carried out by the tool, while the feed motion is performed by the table carrying the work piece.
The Shaper Feed Mechanism
- By using a combination of various shaped links we can change the rotating motion supplied by the motor to a linear cyclic motion.
- In order to obtain a precise groove width and a calculated cyclic longitudinal pitch the use of this mechanism was important.
Operation: (From figure 1)
• Gear (1) obtaining its motion from the quick feed mechanism’s input rotates.
• The gear moves the link (2).
• Body (3) and the ratchet wheel (4) are mounted on the same shaft. Motion is transmitted from link 2 to body (3).
• Body (3) contains a pawl which reciprocates about its axis moving the ratchet wheel with it.
• The gear rotates a screw which is mounted on its shaft.
• The nut mounted on the screw moves linearly providing the motion of the table resulting in the feed motion.
The UK Market for Agri-Food and Horticultural Products: opportunities for Dut...DutchEmbassy
The Embassy of the Netherlands commissioned leading agri-food consultancy Promar International to review the UK agri-food and horticultural market. The purpose of the research was to identify opportunities in the UK agri-food market for Dutch food and drink Small and Medium Sized Enterprises (SME’s) (1-5 year time horizon). The research was carried out between April and June 2013, consisting of:
-Desk-based analysis of a significant body of published information and data.
-Supplemented by telephone interviews with industry leaders.
This report documents key analysis, insights and conclusions.
Introduction
The shaper machine is a machine that can make slots and grooves using a thin cutting tool. The linear cutting motion is provided by the “Whitworth Quick-Return Mechanism“. While the feed motion is supplied by the mechanism illustrated in this report "The shaper feed Mechanism”. During shaping, cutting and infeed motions are carried out by the tool, while the feed motion is performed by the table carrying the work piece.
The Shaper Feed Mechanism
- By using a combination of various shaped links we can change the rotating motion supplied by the motor to a linear cyclic motion.
- In order to obtain a precise groove width and a calculated cyclic longitudinal pitch the use of this mechanism was important.
Operation: (From figure 1)
• Gear (1) obtaining its motion from the quick feed mechanism’s input rotates.
• The gear moves the link (2).
• Body (3) and the ratchet wheel (4) are mounted on the same shaft. Motion is transmitted from link 2 to body (3).
• Body (3) contains a pawl which reciprocates about its axis moving the ratchet wheel with it.
• The gear rotates a screw which is mounted on its shaft.
• The nut mounted on the screw moves linearly providing the motion of the table resulting in the feed motion.
The UK Market for Agri-Food and Horticultural Products: opportunities for Dut...DutchEmbassy
The Embassy of the Netherlands commissioned leading agri-food consultancy Promar International to review the UK agri-food and horticultural market. The purpose of the research was to identify opportunities in the UK agri-food market for Dutch food and drink Small and Medium Sized Enterprises (SME’s) (1-5 year time horizon). The research was carried out between April and June 2013, consisting of:
-Desk-based analysis of a significant body of published information and data.
-Supplemented by telephone interviews with industry leaders.
This report documents key analysis, insights and conclusions.
2. introduction
Rik Grashoff
• GreenLeft party
• Alderman in Delft
from 1998-2006
• Alderman in
Rotterdam 2008-
2010
• MP 2010-2012
3. Welcome to The Netherlands
• 26% of all transportation by bicycle
• Bicycle is the main transportation method
on trips between 1 and 5 km.
• Dutch people cycle on average
900 km/year
• Cycling is safe, fast and comfortable
6. Welcome to Delft
• Population of nearly 100,000
• Located between two bigger cities
• Well connected to railway network
• 20.000 students, High educated population
• Compact
11. How to create a city-wide
cycling network
• Make a long time vision > 20 Years!
• Emphasize first on most important
relations within the city
• Take advance of every action on
infrastructure to improve: creating
missing links, safety measures etc.
• Use the principles of integrated
design