INTRODUCTION
DISPLAY BOARDS ARE PRIMARY THING IN ANY INSTITUTE, ORGANIZATION, PUBLIC UTILITY PLACES LIKE BUS
STOPS, RAILWAY STATIONS, PARKS, SHOPPING MALLS TO DISPLAY INFORMATION REGARDING PLATFORMS,
VARIOUS ADVERTISEMENTS ABOUT THE PRODUCTS, OR IMPORTANT NOTICES. PEOPLE ARE NOW ADAPTED
TO THE IDEA OF THE WORLD AT ITS FINGERTIPS.
WE NORMALLY USE A SIMPLE STATIC LED DISPLAY SCREEN TO CONVEY A MESSAGE. EARLIER, WHEN WE
WANT TO DISPLAY LARGE DATA, WE USED TO CHANGE MESSAGE FOR EVERY FEW INSTANCES. NOW
SCROLLING DISPLAYS ARE MORE PREFERRED TO STATIC. BY USING A PRE PROGRAMMED CONTROLLER, WE
CAN MAKE LED DISPLAY IN SCROLLING WAY. WE CAN ALSO MAKE LED TO ADOPTABLE BY USING PC
CONTROLLER BASED SYSTEM.
PURPOSE OF PROJECT
• In our project we have brought LED Display Board. We are using
LED Player 6.0 software to control the LED based Display Board.
By using this software we have a full control over the LED
Display. We are using this LED Display Board to display GATE
Questions and some important notices in our department.
LED MODULE
GENERAL INFORMATION
• The P10 single color is a high brightness, lower power consumption, long life time display module. Designed for semioutdoor use environment.
• Resolution of Module >Total LEDs in Module
• Q 40%
•
• This module LED display panel can be used to make any kind of large outdoor LED display panels by arranging modules in horizontal and vertical manner.
One panel has a width of 12 inches and height of 6 inches. Display has a resolution of 32*16 pixels thus there are total 512 LEDs. It has a good quality
plastic cabinet that makes it suitable for outdoor use. The module has whole control circuit built in and has a simple interface requiring only seven line
connections with controller board.
• 29
•
• Height of module : 6 Inches
• Width of module: 12 Inches
• Resolution of module: 32* 16 Pixels
• Total LED’S in module: 512
FEATURES
• ¼ duty scan drive
• Brightness: 3500nits to 4500nits
• • Max Power Consumption:20W
• • Input Voltage: 5V DC (Max. 7V)
• Input Current: 1.5A
• • Constant Voltage Drive.
• • IP65 Waterproof
• .
• Operating Temperature: -20°C to 50°C
• IW Pixel Configuration
• • High Viewing Angle
• • High Contrast Ratio with a perfect louver/cover

Presentation.pptx

  • 1.
    INTRODUCTION DISPLAY BOARDS AREPRIMARY THING IN ANY INSTITUTE, ORGANIZATION, PUBLIC UTILITY PLACES LIKE BUS STOPS, RAILWAY STATIONS, PARKS, SHOPPING MALLS TO DISPLAY INFORMATION REGARDING PLATFORMS, VARIOUS ADVERTISEMENTS ABOUT THE PRODUCTS, OR IMPORTANT NOTICES. PEOPLE ARE NOW ADAPTED TO THE IDEA OF THE WORLD AT ITS FINGERTIPS. WE NORMALLY USE A SIMPLE STATIC LED DISPLAY SCREEN TO CONVEY A MESSAGE. EARLIER, WHEN WE WANT TO DISPLAY LARGE DATA, WE USED TO CHANGE MESSAGE FOR EVERY FEW INSTANCES. NOW SCROLLING DISPLAYS ARE MORE PREFERRED TO STATIC. BY USING A PRE PROGRAMMED CONTROLLER, WE CAN MAKE LED DISPLAY IN SCROLLING WAY. WE CAN ALSO MAKE LED TO ADOPTABLE BY USING PC CONTROLLER BASED SYSTEM.
  • 2.
    PURPOSE OF PROJECT •In our project we have brought LED Display Board. We are using LED Player 6.0 software to control the LED based Display Board. By using this software we have a full control over the LED Display. We are using this LED Display Board to display GATE Questions and some important notices in our department.
  • 3.
  • 4.
    GENERAL INFORMATION • TheP10 single color is a high brightness, lower power consumption, long life time display module. Designed for semioutdoor use environment. • Resolution of Module >Total LEDs in Module • Q 40% • • This module LED display panel can be used to make any kind of large outdoor LED display panels by arranging modules in horizontal and vertical manner. One panel has a width of 12 inches and height of 6 inches. Display has a resolution of 32*16 pixels thus there are total 512 LEDs. It has a good quality plastic cabinet that makes it suitable for outdoor use. The module has whole control circuit built in and has a simple interface requiring only seven line connections with controller board. • 29 • • Height of module : 6 Inches • Width of module: 12 Inches • Resolution of module: 32* 16 Pixels • Total LED’S in module: 512
  • 5.
    FEATURES • ¼ dutyscan drive • Brightness: 3500nits to 4500nits • • Max Power Consumption:20W • • Input Voltage: 5V DC (Max. 7V) • Input Current: 1.5A • • Constant Voltage Drive. • • IP65 Waterproof • . • Operating Temperature: -20°C to 50°C • IW Pixel Configuration • • High Viewing Angle • • High Contrast Ratio with a perfect louver/cover