Prantik Purkayastha is seeking a position in automation systems design, development, and commissioning. He has 9 years of experience as a project lead working on automation projects in steel mills, processing lines, and iron ore enrichment. He is proficient in PLC/DCS programming using platforms like Siemens, Codesys, and SCADA development. Some of his project experiences include automation of rolling mills, pickling lines, and iron ore washing plants. He is skilled in project planning, testing, commissioning, training end users, and developing technical staff.
- MuhammadShahid Bilal has 14 years of experience as an electronic engineer working with PLCs and automation controls in cement plants in Pakistan and Saudi Arabia.
- He holds a Bachelor's degree in Electronics Engineering and is seeking a managerial position to make full use of his skills and experience in programming various PLC software, maintaining instrumentation systems, and minimizing plant downtime.
- His experience includes extensive programming with Schneider PLC software, Siemens PLC software, ABB DCS software, frequency drives, and FLS automation software, as well as maintaining and calibrating various field instruments.
The document provides details about Ahmad Dasuki, including his contact information, objective, education history, technical skills, and professional experience working in instrumentation and control roles for oil and gas, semiconductor, and solar industries. He has over 15 years of experience maintaining and troubleshooting control systems including PLCs, drives, and SCADA systems. His most recent role is as Chief Electronic Technician at Transocean Indonesia where he is responsible for maintenance and repairs of electronic equipment on offshore rigs.
Atul N Jadhav has over 14 years of experience in process automation. He has expertise in DCS systems like Honeywell EPKS, Siemens PCS7, and ABB DCS. He is proficient in PLCs such as Siemens S7, Allen Bradley, and Honeywell PLCs. He has experience in SCADA systems including WinCC, Experion, and PanelView. Some of his responsibilities include project management, instrumentation, electrical and documentation. He has led many projects for clients in industries like dairy, oil and gas, and automotive. He holds a Bachelor's degree in engineering and is based in Nashik, India.
NISSI Engineering Solution Pvt Ltd is an engineering services company that was established in 2005 in Chennai, India. It provides electrical substation design, automation, retrofitting, testing and commissioning services. The company has experience working on projects in India and other countries like the Middle East, Africa, Indonesia and Australia. It has a team of over 150 engineers and technicians with expertise in various technologies from manufacturers like ABB, Siemens, Schneider and Alstom. NISSI aims to provide quality engineering services to its clients on time.
This curriculum vitae is for Kevin Pratt, who has over 20 years of experience as an electrician and control/commissioning engineer working with process control systems. He currently works as the director and control engineer at his own company, KP Controls, where he has worked on major projects for Diageo distilleries. Some of his responsibilities include design, documentation, programming, commissioning, training, and optimizing automation systems. He has extensive experience working with PLCs and HMIs from manufacturers such as Siemens, Allen-Bradley, and Schneider.
Uday Kiran Abbi is an experienced DCS-Process Engineer with over 6 years of experience in DCS/PLC hardware application maintenance and troubleshooting. He has expertise in DCS systems from Honeywell, Emerson, and Ovation and has experience commissioning power plants and oil and gas facilities. His professional experience includes roles at Honeywell India, Emerson Process Management, Korean Plant Service, and Sungentech Pvt Ltd where he performed tasks such as DCS/PLC installation, configuration, testing, commissioning, logic development, and maintenance.
Lalit Kumar has over 6 years of experience in industrial automation and electrical fields. He has technical expertise in Allen Bradley and Schneider PLCs, HMI software, network communication protocols, electrical installation and commissioning of instruments. He has experience managing automation projects for companies in various industries. His previous roles include electrical and automation engineer, senior engineer for services and sales, and project engineer where he performed tasks like PLC programming, SCADA development, drive commissioning, and factory acceptance testing.
Arun Verma is seeking senior level positions in project planning and management, maintenance, erection, and commissioning, preferably in the steel sector. He has over 15 years of experience in these areas, having worked on projects for companies like Bhushan Power & Steel Ltd., Mukand Ltd., Dabur Engineering Works, and ABB Ltd. His experience includes roles like senior manager, deputy manager, manager, and engineer. He is proficient in programming PLC systems, HMIs, and has experience commissioning systems for rolling mills, blast furnaces, and other steel and engineering projects.
- MuhammadShahid Bilal has 14 years of experience as an electronic engineer working with PLCs and automation controls in cement plants in Pakistan and Saudi Arabia.
- He holds a Bachelor's degree in Electronics Engineering and is seeking a managerial position to make full use of his skills and experience in programming various PLC software, maintaining instrumentation systems, and minimizing plant downtime.
- His experience includes extensive programming with Schneider PLC software, Siemens PLC software, ABB DCS software, frequency drives, and FLS automation software, as well as maintaining and calibrating various field instruments.
The document provides details about Ahmad Dasuki, including his contact information, objective, education history, technical skills, and professional experience working in instrumentation and control roles for oil and gas, semiconductor, and solar industries. He has over 15 years of experience maintaining and troubleshooting control systems including PLCs, drives, and SCADA systems. His most recent role is as Chief Electronic Technician at Transocean Indonesia where he is responsible for maintenance and repairs of electronic equipment on offshore rigs.
Atul N Jadhav has over 14 years of experience in process automation. He has expertise in DCS systems like Honeywell EPKS, Siemens PCS7, and ABB DCS. He is proficient in PLCs such as Siemens S7, Allen Bradley, and Honeywell PLCs. He has experience in SCADA systems including WinCC, Experion, and PanelView. Some of his responsibilities include project management, instrumentation, electrical and documentation. He has led many projects for clients in industries like dairy, oil and gas, and automotive. He holds a Bachelor's degree in engineering and is based in Nashik, India.
NISSI Engineering Solution Pvt Ltd is an engineering services company that was established in 2005 in Chennai, India. It provides electrical substation design, automation, retrofitting, testing and commissioning services. The company has experience working on projects in India and other countries like the Middle East, Africa, Indonesia and Australia. It has a team of over 150 engineers and technicians with expertise in various technologies from manufacturers like ABB, Siemens, Schneider and Alstom. NISSI aims to provide quality engineering services to its clients on time.
This curriculum vitae is for Kevin Pratt, who has over 20 years of experience as an electrician and control/commissioning engineer working with process control systems. He currently works as the director and control engineer at his own company, KP Controls, where he has worked on major projects for Diageo distilleries. Some of his responsibilities include design, documentation, programming, commissioning, training, and optimizing automation systems. He has extensive experience working with PLCs and HMIs from manufacturers such as Siemens, Allen-Bradley, and Schneider.
Uday Kiran Abbi is an experienced DCS-Process Engineer with over 6 years of experience in DCS/PLC hardware application maintenance and troubleshooting. He has expertise in DCS systems from Honeywell, Emerson, and Ovation and has experience commissioning power plants and oil and gas facilities. His professional experience includes roles at Honeywell India, Emerson Process Management, Korean Plant Service, and Sungentech Pvt Ltd where he performed tasks such as DCS/PLC installation, configuration, testing, commissioning, logic development, and maintenance.
Lalit Kumar has over 6 years of experience in industrial automation and electrical fields. He has technical expertise in Allen Bradley and Schneider PLCs, HMI software, network communication protocols, electrical installation and commissioning of instruments. He has experience managing automation projects for companies in various industries. His previous roles include electrical and automation engineer, senior engineer for services and sales, and project engineer where he performed tasks like PLC programming, SCADA development, drive commissioning, and factory acceptance testing.
Arun Verma is seeking senior level positions in project planning and management, maintenance, erection, and commissioning, preferably in the steel sector. He has over 15 years of experience in these areas, having worked on projects for companies like Bhushan Power & Steel Ltd., Mukand Ltd., Dabur Engineering Works, and ABB Ltd. His experience includes roles like senior manager, deputy manager, manager, and engineer. He is proficient in programming PLC systems, HMIs, and has experience commissioning systems for rolling mills, blast furnaces, and other steel and engineering projects.
Krishna Gopal Solanki has over 7 years of experience as a telecom engineer working with companies such as Ericsson, Hayat Communication, and Huawei. He has hands-on experience with 2G, 3G, and 4G networks and equipment from Ericsson, Nokia, and Huawei. Currently, he works as a senior RAN engineer for Ericsson Globel India where he performs tasks such as LTE network integration, software upgrades, and troubleshooting.
Repairs and maintenance of aircraft systems at Warner Robins
Air Logistics Center was tethered to an unreliable proprietary
control system prone to running the wrong recipes. The result:
irreparable damage to expensive airplane parts. Working with
PREMIER System Integrators, the organization implemented
a new solution with tightly integrated FactoryTalk® Batch,
Historian, VantagePoint® and ThinManager® software. The
new system has improved reliability and flexibility, boosting
utilization by 50 percent and saving tens of thousands of dollars
in under 60 days.
Siddhartha Saxena is seeking an assembly shop maintenance engineer position. He has over 4 years of experience in maintenance engineering. He has worked at Marriott Courtyard hotel in Agra as a maintenance engineer since 2015, where he controlled hotel systems through PLC panels and maintained various utilities. Prior to this, he worked at Atlas Copco from 2012-2014 as a service engineer, maintaining assembly tools and keeping records. He has technical skills in preventative maintenance, communication protocols, calibration, and optimization. He holds certifications as a certified service technician and has completed various trainings.
Nikhil Valsala Gangadharan is seeking a position in Signalling Engineering. He has over 4 years of experience in designing, testing, and commissioning railway signalling systems. His expertise includes designing signalling circuits and interfaces, conducting factory and site acceptance tests, debugging application logic, and establishing communication between data loggers and signalling interlocking systems. Currently he is working as a Junior Executive at Siemens Rail Automation Pvt Ltd and is involved in various signalling installation projects across Indian railways.
Rami Abou Omeira is an Egyptian engineer with 10 years of experience in telecommunications as a senior engineer for 2G, 3G, and 4G networks. He has managed projects in multiple countries and has experience working with Nokia, Alcatel-Lucent, Huawei, Ericsson, and Motorola. Currently he works as a back office engineer for Ericsson, providing support to field engineers.
Ram Kumar is a competent professional with over 4 years of experience in field instrumentation, control systems, automation, and technical support. He currently works as an Executive Engineer for Yokogawa India Limited. He has extensive experience working with DCS systems like Yokogawa CENTUM VP and Honeywell systems. Some of his key skills include loop configuration, control logic design, commissioning activities, and troubleshooting field devices. He is seeking new assignments in project management, automation, installation, and commissioning.
Muhammad Shahzad Ali is an electrical engineer with over 9 years experience managing projects and testing/commissioning substations up to 380kV in Saudi Arabia. He has a BSc in Electrical Engineering and is a registered professional engineer in Saudi Arabia and Pakistan. He is proficient in testing protection relays such as those from Siemens, ABB, and Areva. He is skilled in commissioning activities including busbar testing and transformer energization.
Jim Phillips has over 28 years of experience in industrial controls including project management, PLC and HMI design, programming and commissioning. He has a BSEE from Auburn University and expertise with Allen Bradley, Wonderware and other automation systems. His experience spans various industries and includes designing control systems, programming PLCs/HMIs, and managing projects from design through commissioning. He is seeking permanent or contract employment utilizing his extensive automation background.
Rizwan Ahmad is a telecom and networks engineer based in the UAE with over 10 years of experience. He holds certifications in CCNA and MCSE. He has worked as a project engineer and site engineer for various telecom companies in Pakistan and the UAE, managing projects involving installation and configuration of networking equipment from Cisco, HP, Microsoft and more. He is proficient in technologies including routing, switching, wireless, Windows server administration, and project management software. He aims to leverage his technical skills and experience in a communications or IT engineering and management role.
K. Phani is seeking a new position with over 15 years of experience in telecommunications including transmission, data, switches, and fiber. He has experience with equipment from companies like Lucent, NEC, and ZTE. Currently he works as a Deputy Manager at Tata Teleservices handling network switches. He is looking to utilize his experience in areas like transmission monitoring, switch operations and maintenance, and fault isolation.
Abhishek Sarkar is seeking a challenging position in a professional organization where he can enhance his skills. He has 2 years of experience in PLC logic development, commissioning, and maintenance of PLC and MCC panels in steel plants. He is currently working as an Engineering Executive at Control Desk Solutions, where he has experience developing logic and HMIs using Siemens automation platforms. He has a Bachelor's degree in Electrical and Electronics Engineering and is proficient in PLC control systems, SCADA applications, and project implementation.
This resume is for Jim Phillips, an electrical controls engineer and project manager with over 28 years of experience in industrial automation. He has extensive experience designing, programming, installing, and commissioning PLC, HMI, and SCADA systems using various Allen Bradley and Wonderware software. His background includes project management, system integration, personnel management, and working with clients in various industries globally.
Richard Lemin is a senior engineer seeking a field-based role focused on commissioning. He has over 15 years of experience in controls engineering, commissioning, and maintenance across various industries. His background includes roles in railway signaling, oil and gas turbine controls, and currently as a team leader for a global engineering firm. He has extensive training and qualifications in electrical and controls systems.
Garry Douglas is seeking a new position utilizing his 29 years of experience in maintenance fields. He has held supervisory roles overseeing teams that install, maintain, and repair electrical systems. His experience includes programming PLC controls, troubleshooting equipment issues, and ensuring safety procedures are followed.
This curriculum vitae summarizes the qualifications and experience of Stephen W. Smith, an electrical engineer with 35 years of experience. It outlines his extensive skills in PLC, SCADA, HMI, and industrial network programming, design, and maintenance. It also provides details of his employment history and roles with various companies, demonstrating a track record of managing engineering teams and implementing process improvements.
Genex Probe is a drive test tool from Huawei that can test GSM, GPRS, and WCDMA networks. It involves connecting hardware like a dongle, mobile phone, and GPS to the tool. Users can then configure test plans for different types of tests, like voice calls or PESQ testing. The tool assists with tasks like importing BTS data, recording and analyzing log files, and outputting test data.
Nawal kishore Prasad has over 8 years of experience in the telecom sector, currently working as a Project Coordinator for Welkin Telecom Infra Pvt Ltd on Reliance Jio projects in Jharkhand Circle. He is responsible for installation, commissioning, and testing activities. He has hands-on experience with 3G and 4G networks and equipment from manufacturers like ZTE, Ericsson, and Samsung. As Project Coordinator, his responsibilities include planning and executing rollout schedules, coordinating with installation vendors, and ensuring quality and customer satisfaction. Previously he has held roles as Cluster Lead for Tata Docomo and STEL networks, overseeing operations and maintenance.
The REMC team presented on the status of their electric vehicle motor controller project. They discussed their mission to design a reliable motor controller for their vehicle that will achieve 85% efficiency and protect components from dangerous conditions. They reviewed the history of past unreliable controllers and outlined their current work reverse engineering the previous design and prototyping an updated power stage board with a new driver chip and MOSFETs. Their goals are to populate the prototype board by semester's end, have the new design fabricated by March 1st, complete in-vehicle testing by March 15th in preparation for the April competition.
V.R. Gokulakrishnan is seeking an opportunity in development and planning with over 6 years of experience in power system protection and automation. He holds a B.E. in Electrical and Electronics Engineering from SRM Valliammai Engineering College. His experience includes relay testing, protection schemes, substation automation systems, and commissioning of electrical substations up to 33kV levels in India and abroad. Currently he works as a Testing Engineer for DanwayEME in Dubai commissioning 33/11kV substations.
Job Thomas Skaria is an automation engineer with over 3 years of experience working with PLCs, SCADA, HMIs, drives, and DCS systems. He has a Bachelor's degree in Electronics and Telecommunication Engineering and is a Certified Automation Engineer. Some of the projects he has worked on include a motor testing panel using Siemens PLC and drives, a process control system for a bakery wafer line, an automatic crane for packaging, and an air pollution control system. He is currently working as a senior technician in Dubai.
Sujit Das has 12 years of experience in electrical engineering and automation systems for process plants, machine tools industries, and substations. He has expertise in PLC programming, SCADA development, CNC systems, servo drives, VFD drives, and designing electrical systems. Some of his responsibilities include designing, installing, and commissioning automation, electrical, and power management systems for various industries. He is proficient in software such as Eplan, AutoCAD, Solid Edge, and PLC programming packages from Siemens and GE Fanuc.
Pankaj Pal provides a summary of his experience and qualifications for a middle management role in automation and instrumentation. He has over 5 years of experience in project engineering, design, software development, commissioning, and technical support of automation systems. He is proficient in PLC programming, SCADA application development, loop testing, commissioning, and network configuration. He has worked on numerous automation projects in industries such as oil and gas extraction, water treatment, power generation, and grain storage.
Krishna Gopal Solanki has over 7 years of experience as a telecom engineer working with companies such as Ericsson, Hayat Communication, and Huawei. He has hands-on experience with 2G, 3G, and 4G networks and equipment from Ericsson, Nokia, and Huawei. Currently, he works as a senior RAN engineer for Ericsson Globel India where he performs tasks such as LTE network integration, software upgrades, and troubleshooting.
Repairs and maintenance of aircraft systems at Warner Robins
Air Logistics Center was tethered to an unreliable proprietary
control system prone to running the wrong recipes. The result:
irreparable damage to expensive airplane parts. Working with
PREMIER System Integrators, the organization implemented
a new solution with tightly integrated FactoryTalk® Batch,
Historian, VantagePoint® and ThinManager® software. The
new system has improved reliability and flexibility, boosting
utilization by 50 percent and saving tens of thousands of dollars
in under 60 days.
Siddhartha Saxena is seeking an assembly shop maintenance engineer position. He has over 4 years of experience in maintenance engineering. He has worked at Marriott Courtyard hotel in Agra as a maintenance engineer since 2015, where he controlled hotel systems through PLC panels and maintained various utilities. Prior to this, he worked at Atlas Copco from 2012-2014 as a service engineer, maintaining assembly tools and keeping records. He has technical skills in preventative maintenance, communication protocols, calibration, and optimization. He holds certifications as a certified service technician and has completed various trainings.
Nikhil Valsala Gangadharan is seeking a position in Signalling Engineering. He has over 4 years of experience in designing, testing, and commissioning railway signalling systems. His expertise includes designing signalling circuits and interfaces, conducting factory and site acceptance tests, debugging application logic, and establishing communication between data loggers and signalling interlocking systems. Currently he is working as a Junior Executive at Siemens Rail Automation Pvt Ltd and is involved in various signalling installation projects across Indian railways.
Rami Abou Omeira is an Egyptian engineer with 10 years of experience in telecommunications as a senior engineer for 2G, 3G, and 4G networks. He has managed projects in multiple countries and has experience working with Nokia, Alcatel-Lucent, Huawei, Ericsson, and Motorola. Currently he works as a back office engineer for Ericsson, providing support to field engineers.
Ram Kumar is a competent professional with over 4 years of experience in field instrumentation, control systems, automation, and technical support. He currently works as an Executive Engineer for Yokogawa India Limited. He has extensive experience working with DCS systems like Yokogawa CENTUM VP and Honeywell systems. Some of his key skills include loop configuration, control logic design, commissioning activities, and troubleshooting field devices. He is seeking new assignments in project management, automation, installation, and commissioning.
Muhammad Shahzad Ali is an electrical engineer with over 9 years experience managing projects and testing/commissioning substations up to 380kV in Saudi Arabia. He has a BSc in Electrical Engineering and is a registered professional engineer in Saudi Arabia and Pakistan. He is proficient in testing protection relays such as those from Siemens, ABB, and Areva. He is skilled in commissioning activities including busbar testing and transformer energization.
Jim Phillips has over 28 years of experience in industrial controls including project management, PLC and HMI design, programming and commissioning. He has a BSEE from Auburn University and expertise with Allen Bradley, Wonderware and other automation systems. His experience spans various industries and includes designing control systems, programming PLCs/HMIs, and managing projects from design through commissioning. He is seeking permanent or contract employment utilizing his extensive automation background.
Rizwan Ahmad is a telecom and networks engineer based in the UAE with over 10 years of experience. He holds certifications in CCNA and MCSE. He has worked as a project engineer and site engineer for various telecom companies in Pakistan and the UAE, managing projects involving installation and configuration of networking equipment from Cisco, HP, Microsoft and more. He is proficient in technologies including routing, switching, wireless, Windows server administration, and project management software. He aims to leverage his technical skills and experience in a communications or IT engineering and management role.
K. Phani is seeking a new position with over 15 years of experience in telecommunications including transmission, data, switches, and fiber. He has experience with equipment from companies like Lucent, NEC, and ZTE. Currently he works as a Deputy Manager at Tata Teleservices handling network switches. He is looking to utilize his experience in areas like transmission monitoring, switch operations and maintenance, and fault isolation.
Abhishek Sarkar is seeking a challenging position in a professional organization where he can enhance his skills. He has 2 years of experience in PLC logic development, commissioning, and maintenance of PLC and MCC panels in steel plants. He is currently working as an Engineering Executive at Control Desk Solutions, where he has experience developing logic and HMIs using Siemens automation platforms. He has a Bachelor's degree in Electrical and Electronics Engineering and is proficient in PLC control systems, SCADA applications, and project implementation.
This resume is for Jim Phillips, an electrical controls engineer and project manager with over 28 years of experience in industrial automation. He has extensive experience designing, programming, installing, and commissioning PLC, HMI, and SCADA systems using various Allen Bradley and Wonderware software. His background includes project management, system integration, personnel management, and working with clients in various industries globally.
Richard Lemin is a senior engineer seeking a field-based role focused on commissioning. He has over 15 years of experience in controls engineering, commissioning, and maintenance across various industries. His background includes roles in railway signaling, oil and gas turbine controls, and currently as a team leader for a global engineering firm. He has extensive training and qualifications in electrical and controls systems.
Garry Douglas is seeking a new position utilizing his 29 years of experience in maintenance fields. He has held supervisory roles overseeing teams that install, maintain, and repair electrical systems. His experience includes programming PLC controls, troubleshooting equipment issues, and ensuring safety procedures are followed.
This curriculum vitae summarizes the qualifications and experience of Stephen W. Smith, an electrical engineer with 35 years of experience. It outlines his extensive skills in PLC, SCADA, HMI, and industrial network programming, design, and maintenance. It also provides details of his employment history and roles with various companies, demonstrating a track record of managing engineering teams and implementing process improvements.
Genex Probe is a drive test tool from Huawei that can test GSM, GPRS, and WCDMA networks. It involves connecting hardware like a dongle, mobile phone, and GPS to the tool. Users can then configure test plans for different types of tests, like voice calls or PESQ testing. The tool assists with tasks like importing BTS data, recording and analyzing log files, and outputting test data.
Nawal kishore Prasad has over 8 years of experience in the telecom sector, currently working as a Project Coordinator for Welkin Telecom Infra Pvt Ltd on Reliance Jio projects in Jharkhand Circle. He is responsible for installation, commissioning, and testing activities. He has hands-on experience with 3G and 4G networks and equipment from manufacturers like ZTE, Ericsson, and Samsung. As Project Coordinator, his responsibilities include planning and executing rollout schedules, coordinating with installation vendors, and ensuring quality and customer satisfaction. Previously he has held roles as Cluster Lead for Tata Docomo and STEL networks, overseeing operations and maintenance.
The REMC team presented on the status of their electric vehicle motor controller project. They discussed their mission to design a reliable motor controller for their vehicle that will achieve 85% efficiency and protect components from dangerous conditions. They reviewed the history of past unreliable controllers and outlined their current work reverse engineering the previous design and prototyping an updated power stage board with a new driver chip and MOSFETs. Their goals are to populate the prototype board by semester's end, have the new design fabricated by March 1st, complete in-vehicle testing by March 15th in preparation for the April competition.
V.R. Gokulakrishnan is seeking an opportunity in development and planning with over 6 years of experience in power system protection and automation. He holds a B.E. in Electrical and Electronics Engineering from SRM Valliammai Engineering College. His experience includes relay testing, protection schemes, substation automation systems, and commissioning of electrical substations up to 33kV levels in India and abroad. Currently he works as a Testing Engineer for DanwayEME in Dubai commissioning 33/11kV substations.
Job Thomas Skaria is an automation engineer with over 3 years of experience working with PLCs, SCADA, HMIs, drives, and DCS systems. He has a Bachelor's degree in Electronics and Telecommunication Engineering and is a Certified Automation Engineer. Some of the projects he has worked on include a motor testing panel using Siemens PLC and drives, a process control system for a bakery wafer line, an automatic crane for packaging, and an air pollution control system. He is currently working as a senior technician in Dubai.
Sujit Das has 12 years of experience in electrical engineering and automation systems for process plants, machine tools industries, and substations. He has expertise in PLC programming, SCADA development, CNC systems, servo drives, VFD drives, and designing electrical systems. Some of his responsibilities include designing, installing, and commissioning automation, electrical, and power management systems for various industries. He is proficient in software such as Eplan, AutoCAD, Solid Edge, and PLC programming packages from Siemens and GE Fanuc.
Pankaj Pal provides a summary of his experience and qualifications for a middle management role in automation and instrumentation. He has over 5 years of experience in project engineering, design, software development, commissioning, and technical support of automation systems. He is proficient in PLC programming, SCADA application development, loop testing, commissioning, and network configuration. He has worked on numerous automation projects in industries such as oil and gas extraction, water treatment, power generation, and grain storage.
Prabhu is an instrumentation and controls automation engineer with over 7 years of experience working in Qatar and India. He is seeking a position utilizing his skills in configuring and troubleshooting PLCs, SCADA systems, and control loops. He has extensive experience designing, implementing, and commissioning instrumentation and control systems for water treatment, desalination, and wastewater plants.
Rajesh S provides a resume summarizing his education and work experience in electrical engineering and control systems. He has a B.Tech in Electrical Engineering from J.R.N. Rajasthan Vidyapeeth University and a diploma in Electrical and Electronics Engineering. His work experience includes developing PLC logic, electrical designs, commissioning machines, and troubleshooting at companies like Starrag India, Bharat Fritz Werner, Galaxy Machinery, and Reliance Instrument Corporation. He has skills in AutoCAD, ELCAD, CREO, Siemens, Fanuc, Allen Bradley, and Mitsubishi PLC programming.
Nirav Sangani is an automation engineer seeking a new position. He has over 3 years of experience in PLC programming, HMI development, process automation, and electrical maintenance. His skills include programming PLCs from Siemens, Omron, and other brands. He has experience commissioning systems in various industries like chemicals, cement, power, and more. His most recent role was as a project engineer at Horizon Microtech, where he programmed and commissioned many automation systems.
- Rajiv Kumar is seeking a position in industrial automation with over 5 years of experience in design, development, testing, and documentation of automation projects. He has expertise in C, C++, C#, Oracle PL/SQL, Linux, OpenVMS, and big data technologies like Hadoop, HDFS, MapReduce, Hive and Pig.
- He currently works as an automation consultant at Tata Steel Ltd where he has implemented various process control systems and optimized production processes. Previous experience includes roles at Special Software Pvt Ltd and Eventcy Software Solution Pvt Ltd.
- He has an B.Tech in Computer Science and Engineering and skills in technologies like Windows, Linux, Oracle, SQL, .NET framework
Kumaresan T is an electrical and electronics engineer seeking a career in industrial automation. He has over 6 years of experience in commissioning SAS and SCADA systems for various power and industrial projects in India and abroad. His technical skills include programming RTUs, configuring protocols like IEC 61850 and Modbus, designing HMIs, and testing and commissioning automation systems. He is currently working as a SAS commissioning engineer for ABB in Saudi Arabia.
This document contains a resume for Rabi Kumar Purohita. It summarizes his professional experience in railway and metro signaling projects over the past 11 years, including roles as a project warranty manager, team leader, and senior engineer. It also lists his educational qualifications and technical skills related to signaling systems, including interlocking, automatic train control, and data loggers.
N.Vidhyadaran has over 5 years of experience as an electrical and automation engineer specializing in testing and commissioning. He has strong skills in programming PLCs and VFDs, along with developing SCADA screens using Siemens software. Some of his project experience includes commissioning soft starters, VFDs, PLC panels and MCC panels for various industries. He is proficient in Siemens products and has undertaken many commissioning assignments and factory tests for equipment like VFDs, PLCs and MCC panels.
This resume is for Uday Kiran Abbi, an experienced DCS-Process Engineer seeking a new role applying expertise in DCS/PLC hardware, application maintenance, troubleshooting, programming, and project contributions. He has over 6 years of experience in roles such as Senior Commissioning Engineer at ABB GISPL and Senior Project Engineer at Honeywell India, working on projects including power plants, oil and gas facilities, and handling hardware engineering, controls design, testing, commissioning, and migrations. He has expertise in DCS/PLC systems such as Honeywell EPKS C300, Emerson DeltaV, and Ovation.
This document contains a resume for Sandeep L. Anugade, an automation professional with over 10 years of experience in hardware engineering, designing, commissioning, and executing automation projects for various industrial domains. It lists his technical skills and experience programming PLCs from Siemens and Allen-Bradley, along with HMIs, drives, and other industrial software. It also provides details on several automation projects he has worked on, including for power plants, hydroelectric plants, and automotive manufacturing facilities.
Melwin Miranda is seeking a career in a hi-tech corporate environment. He has over 2 years of experience in PLC programming, SCADA development, HMI design, and commissioning of continuous casting machines. He has worked on numerous projects for clients in India and abroad involving automation of casting machines using Rockwell, Siemens, and Mitsubishi controllers. His technical skills include ladder logic, various programming software, communication protocols, and configuration of drives and HMIs. He holds a Bachelor's degree in Electronics Engineering.
Mr. Pornprasert Suntawong is a 38-year-old automation engineer from Thailand with over 15 years of experience in automation projects for steel mills. He has extensive experience commissioning automation systems from Siemens including PLCs, HMIs, and DCS for various processes. Some of the key projects he has worked on include automation systems for mills in India, China, USA, and Thailand. He is proficient in languages, software, and industrial automation technologies.
Madhuraveeran g automation application engineerMadhura Magesh
Madhura is an automation application engineer with over 4 years of experience programming PLCs and designing control systems. He has a Bachelor's degree in electrical and electronics engineering. His skills include programming PLCs from various manufacturers in ladder logic, function block, and structured text. He also programs HMIs and has experience with SCADA systems. Some of his projects include designing control systems for a high speed press feeder machine, a seat belt buckle inspection machine, and commissioning automation on multiple production lines.
P. Dasu is an Industrial Automation Engineer seeking a challenging position in the field. He has over 2 years and 6 months of experience in automation. He is proficient in PLC programming, SCADA development, and site maintenance. He has expertise in ABB PLCs and SCADA Vantage software. Currently he is working as a Site Engineer for GGIPL on an ONGC project involving monitoring of production and drilling data across various sites in India.
Aravindan Ramu is an electrical engineer with over 15 years of experience in industrial automation projects. He has worked as a manager overseeing the electrical department at Melwire Rolling Pvt. Ltd in Sri Lanka for the past 3.9 years. Prior to that, he spent 5.4 years at Parker Hannifin in India as a senior project engineer and customer support engineer working on drive systems, PLCs, and SCADA projects. He has extensive experience commissioning and troubleshooting automation systems for various industries including metalworking, rubber, paper, and power.
This résumé is for Prashant R. Vispute, an Industrial Automation - System Analyst with over 11 years of experience. He is currently employed as an Assistant Manager - Projects at Fox Solutions in Nashik, India. The résumé outlines his technical expertise in areas like PLC, SCADA, DCS programming and various automation products. It also provides details of his role and responsibilities, key projects, education qualifications and personal details.
Sidharth Silla is seeking a position as an electrical engineer with experience in controls and automation using PLCs, HMIs, and SCADA systems. He has over 6 years of experience programming and configuring Allen Bradley and Siemens PLCs for applications in manufacturing, power generation, and distribution. His skills include ladder logic, HMI development, networking protocols, and automation tools like RSLogix 5000, FactoryTalk, and Step 7. Sidharth holds a Master's degree in Electrical Engineering and is authorized to work in the US for any employer.
This curriculum vitae is for Kallol Chatterjee, an Indian citizen currently located in Delhi NCR. He has over 15 years of experience in automation and drive applications working for companies like Siemens, Danieli Automation India, ABB Limited, and NELCO Limited. He holds a Bachelor of Engineering degree in Instrumentation and is pursuing an MBA in Marketing. He is seeking new opportunities to work on projects in industries like metals, mining, cement, pulp and paper, and oil and gas.
Scott McParland is a Mechatronics Engineer with 6 years of experience in automation engineering. He has experience programming PLCs and HMIs from manufacturers like Allen-Bradley, Rockwell, and Schneider. He has worked on projects for companies in various industries including oil and gas, automotive, and manufacturing. Mr. McParland is looking for a new position where he can continue working with control systems and SCADA. He believes his educational background and experience at both large and small companies has prepared him to work independently in fast-paced industrial environments.
1. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 1 of 9
TECHNOLOGY PROFESSIONAL
Self-motivated and goal-oriented professional, committed to pursuing a long-term career in
design, development and commissioning of automation systems. Offer a 9-year track record
as Project Lead demonstrating strong analytical and problem solving skills with experience
in Hot & Cold Rolling Mills, Processing Line, Steel making Processes(Blast Furnace)
and Iron-ore Enrichment Process, having proficiency in HiPAC(IPC) /PLC
programming/SCADA development/DCS, and ability to follow through with projects from
inception to completion.
Technical Expertise: Well versed in Siemens PLC/DCS programming (with STL/LAD,
SCL, CFC, and SFC), CODESYS , and SCADA development with WinCC, WinCC-Flexible
and COPADATA, familiar with Siemens PLC system/DCS with Siemens PCS7.
Project Planning & Management: Proven ability to plan, organize and lead projects/teams
in small groups, and to ensure testing and commissioning of industrial automation systems
with PLC/DCS and HMI.
Technical Support & Training: Demonstrated skills in training and supporting end users
and developing technical staff to achieve performance objectives.
Effective communicator, with proven ability to build strong working relationships.
TECHNICAL EXPERTISE
Automation Systems
Siemens S7-300 & S7-400, S7- 400H and Siemens PCS7 system
Danieli HIPAC controllers (VME/IPC)
Software Platforms
CodeSys, Step-7, PCS7, WinCC, WinCC Flexible,
COPADATA
Programming Language
STL/Ladder, SCL, C & VB-script
2. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 2 of 9
PROFESSIONAL EXPERIENCE
COMPANY: Danieli India Ltd. Kolkata, India
Senior Engineer: Aug’10- Jun’12
Asst. Manager: July’12 - Jun’15
Manager: July’15 onwards
Recently been entrusted with a project on HDGL, Push-Pull Pickling Line, CRM (UISC-
Abu Dhabi), where I am working as the Team Lead responsible for planning, organization
of a team of six members for the development and timely completion of it; Finalizing the test
procedure considering all the performance criteria, and final commissioning of the
Processing Line, ensuring all the performance specifications for the project to the best of
customer satisfaction.
Danieli India Ltd. is the market leader in steel making technologies and the automation of
the Melt-Shop, Rolling Mills and Mining industry.
PREVIOUS COMPANY: M/ S. Control Desk Solutions Pvt. Ltd Kolkata, India
Project Engineer: 2007- 2010
M/ S. Control Desk Solutions Pvt. Ltd. are a reputed Siemens System Integrator working in
the field of Automation & Drives.
Key Projects and Accomplishments:
Automation of 4-Stand Roughing mill (SAIL-BSL).
Time Frame: May 2015 – till date.
Hardware Platform: Danieli HiPaC controller (VME)- MVME 6100. Communication
interface over fiber optic with all the controllers for individual stands and the Speed
Master. Field communication is over ethercat and profibus.
Software Platform: CoDeSys Version 2.3.9.49 for VME application software.
Role: Commissioning Engineer No. of Team Members: 5
3. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 3 of 9
Accomplishments
• Establishment of the entire network.
• Commissioning of all the roller-table drives and Main-drives.
• Tuning of the side-guides was done.
• Stand#3 and Stand#4 were independently commissioned including edgers and
screw-down motors.
• Load-balancing of main motors was commissioned.
• Minimum tension control, for the edger motors were commissioned.
• Interface with Finishing Mill L1 automation tested.
• Gauge meter control was commissioned with corrections added to the HGC
position on the basis of error in force.
• Successful rolling with Level-2 setup done.
Site in Production. Commissioning Test performed successfully.
Finishing mill HAGC Control/ ACC and Hot-Plate Leveler at New Plate-mill
(SAIL-RSP).
Time Frame: Mar 2014 – Dec 2014.
Hardware Platform: Danieli HiPaC controller (VME)- MVME 7100. Communication
interface over Ethernet with Tracking and Speed master PLC (GE/Converteam
controllers) using EGD communication.
Software Platform: CoDeSys Version 2.3.9.42 for VME application software.
Role: Commissioning Engineer No. of Team Members: 3
Accomplishments
• Magnescale configuration was done to receive quadrature pulse from the
controller for the HGC cylinder positions.
• HGC cylinders were tuned to work in average and differential control with a
ramp rate of 12 mm/s.
• Dual circuit cylinders for bending were tuned to work in force control mode.
• Shifting cylinders are tuned to work in automatic mode as per set-up.
• Screw motors position control was commissioned using square-root position
control.
4. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 4 of 9
• Independent Force control for the HGC cylinders was commissioned for the
zeroing sequence.
• Stretch was calculated for a force of 45,000 kN. Maximum mill force is
90,000 kN.
• Gauge meter control was commissioned with corrections added to the HGC
position on the basis of error in force.
• Successful rolling with Level-2 setup done.
Site Commissioned. Commissioning Test performed successfully.
Crop Shear Optimization for HSM-Finishing Mill (BSL).
Time Frame: Sep 2013 – Dec 2013.
Hardware Platform: Danieli HiPaC- MVME 6100 controller. Operator Stations in the
Ethernet network communicating with the VME over TCP/IP through OPC.
Software Platform: CoDeSys Version 2.3.9.37 for VME application software,
SCADA- Intouch 10.5.
Role: Commissioning Lead No. of Team Members: 2
Accomplishments
• Independently derived the calculation of technological data (Mechanical data)
required for the calculation of Shear trajectory and synchronization of the
shear speed with material speed which is critical for accurate cutting of the
strip head and tail.
• Drive communication and data exchange finalization was performed.
• Finishing Mill entry speed was calibrated to correct for backward.
• Tuning parameters were adjusted to compensate for drive inertia before and
after acceleration.
• Successful commissioning of two line-scanning cameras used for profile
generation of strip-head and strip-tail which is used to decide the optimized
cut-length for head and tail.
FAT is successfully completed.
Site Commissioned.
5. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 5 of 9
Automation of Cold Reversing Mill (THAICHIN).
Time Frame: June 2013 – Aug 2013.
Hardware Platform: Siemens PLC-CPU 416-3DP for CRM auxiliary system and coil
loading/unloading, MVME 6100 controllers for HGC system and Speed-Master.
Connection between VME & PLC is through DP-DP coupler. Connection between
the HGC system controller and SPM is through the back-plane. Operator Stations in
the Ethernet network communicating with the PLC and VME over TCP/IP protocol.
Software Platform: Siemens Step-7 V5.5 SP3, SCADA-COPADATA Zenon V7.0,
CoDeSys Version 2.3.9.22 for VME application software.
Role: Senior Project Engineer No. of Team Members: 3
Accomplishments
• Independently developed the software for Mill auxiliary system following the
reference model given for the project.
• Coil tracking software was developed in SCL with interface with Level-2 for
coil identification and tracking data update.
• Extensively, followed the CoDeSys software for Speed- Master grasping
deeper understanding of all the technological blocks used for Speed &
Tension regulation.
• HGC system sequences for Mill zeroing, Mill stretch calculation and its
correction in mill force are thoroughly tested.
FAT is successfully completed.
Commissioning is due in 2015.
Automation of Push-Pull Pickling Line (THAICHIN).
Time Frame: June 2013 – Aug 2013.
Hardware Platform: Siemens PLC-CPU 416-3DP for Line and Pickling PLC.
Connection between the two PLCs is through S7 connection over Ethernet. Software
Platform: Siemens Step-7 V5.5 SP3, SCADA-COPADATA Zenon V7.0. Connection
with Level 2 is over Ethernet with TCP native connection.
6. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 6 of 9
Role: Senior Project Engineer No. of Team Members: 3
Accomplishments
• Independently developed the software for Line control (Speed Master and
Tension Control) following the reference model given for the project.
• Coil & Line tracking software was developed in SCL with interface with
Level-2 for coil identification, machine set-up and production data.
• Developed a model for the interface with drives with external torque
compensation for the tension mode operation of Pay-off reel and the Tension
reel.
• Derived the calculation of strip head position correction required for the
accumulator in line.
FAT is successfully completed.
Commissioning is due in 2015.
Automation of Bar Finishing Area (SAIL-BHILAI).
Time Frame: Nov 2011 – Mar 2012.
Platform: Siemens Step-7 V5.4, SCADA-INTOUCH WONDERWARE , PLC-CPU
414-3DP with MPI connection between Mill-area main PLC, Bar cutting area PLC,
Wire & Rod-mill auxiliary PLC, and Bar-counting PLC; backplane communication
over S7 connection between Bar cutting area PLC & Layer Forming area PLC.
Operator Stations in the Ethernet network communicating with the PLCs over TCP/IP
protocol through Ethernet CPs.
Role: Project Engineer No. of Team Members: 3
Accomplishments
• Software Development of the project is complete.
• S7 connection between the two CPUs in multi-computing architecture was not
there in the original network drawing, which was corrected by the developer
himself.
FAT is successfully completed.
Commissioning is due in 2015.
7. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 7 of 9
Automation of Iron Ore Washing Plant (NISCO-IRAN).
Time Frame: Aug 2010 – Present.
Platform: Siemens Step-7 V5.4, SCADA-WINCC V6.2 , PLC-CPU 414-3DP with
MPI connection between Mill-area main PLC, Filtration area main PLC, Tailing PLC,
Stockpile PLC, WTP PLC and Crusher PLC, with four standalone Operator Stations
in the Ethernet network communicating with the PLCs over TCP/IP protocol through
Ethernet CPs.
Role: Project Engineer No. of Team Members: 5
Accomplishments
• Establishment of the profibus network and profibus-DP master/slave
communication with the vendor PLCs for AG-mill, Ball-mill, and Filter Press
etc.
• Communication with Synamics-S120 and Micromaster MM430 drives over
profibus and finalization of the control logic.
• Interfacing of the Belt scale controllers with the profibus network using Any-
bus converters, establishing communication and commissioning of the belt
scale.
• Commissioning of all the PID loops for the pump box, and the feed-rate
control to the AG-mill.
Site Commissioned.
Up gradation of old Step-5 (Siemens) PLC system to Step-7, H-system, and
redesign of the Software for Blast Furnace Charging System & Stoves (DSP-
Durgapur).
Time Frame: July 2008 – May 2009.
Platform: Siemens Step-7 V5.4, SCADA-WINCC V6.2 with AS-OS Engineering,
PLC-H-system (CPU 414-4H) with redundant network connection between Stock-
house PLC, Furnace PLC & Stove PLC with four standalone Operator Stations in the
network.
Role: Project Engineer No. of Team Members: 2
8. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 8 of 9
Accomplishments
• Design & develop Software application of the Stock house, Furnace
charging, and Stoves to ensure seamless transition of the process from old
system to the new one.
• Commissioning of the weighing system for Stock house through Siwarex-U
using IO communication.
• Integration of the Siemens system with Sinter fines PLC system (Schneider)
over Ethernet using MODBUS TCP/IP protocol.
• Point to Point communication between Siemens 400H system & S-5 system
for report data transfer to data server.
Site Commissioned.
Automation of the Blast Furnace Charging System & Hydraulic-based
Distributing Chute Cooling Circuit (TISCO).
Time Frame: Jan 2008 – Nov 2009.
Platform: Siemens PCS7 software, PLC-H-system (CPU 417-4H) with standalone
Operator Stations.
Role: Project Engineer No. of Team Members: 2
Design & develop Software application of the Stock house, Furnace-Top charging,
and Cooling circuit and its commissioning.
Accomplishments
• Commissioning of the PCS7 system with ES/OS engineering.
• Split range Controller application used to control pressure of the cooling
circuit accumulator.
• Proportional control logic used for the control of “Material Flow Gate” with
the position feedback through Grey Code Encoder.
• Stock-rod calibration with Grey Code Encoder.
• Communication between Siemens PLC and Honeywell PLC through OPC.
Site Commissioned.
9. PRANTIK PURKAYASTHA
336/A Purbalok,
Kolkata- 700099.
Mob: - (0) 9748686675
E-mail: prantik.purkayastha@gmail.com
Page 9 of 9
Level#1 Automation of The Electric Arc Furnace Material Handling System
(JSPL)
Time Frame: Mar '09 to June '09.
Platform: Siemens Step-7 V5.4, SCADA-WINCC V6.2, CPU-400 series, ring
configuration of the network between the AS and the remote I/O stations with OLM.
Role: Project Engineer No. of Team Members: 1
Design & develop Software application of the DRI and Flux charging into the EAF
and FAFA system comprising the material charging into the Ladle Furnace & EAF,
and the material charging into the bins.
Site Commissioned.
EDUCATION & TRAINING
I. Examination Passed: Graduation (AMIE) Electronics & Comm.
Engg.
Board/University/Institute: The Institution of Engineers (India)
Year of Passing: 2005
% of Marks: Sec-B: 57.0, Sec-A (Non Diploma): 56.5
II. Examination Passed: Senior School Certificate Examination (Science)
Board/University/Institute: C.B.S.E
Year of Passing: 1996
% of Marks: 56.0
III. Examination Passed: All India Secondary School Examination
Board/University/Institute: C.B.S.E
Year of Passing: 1994
% of Marks: 66.6