Grifo
•
0 likes•249 views
The document appears to be a technical drawing or engineering specification sheet. It contains numeric measurements in different units for items A through D in rows 1 through 6. At the bottom are additional numeric values that may correspond to dimensions or specifications. The sheet was designed by Alejo and approved on 6/06/2016.
Report
Share
Report
Share
Download to read offline
Recommended
Planos tecnicos
This document contains engineering drawings across 3 sheets. Sheet 1 provides overall dimensions for a design and calls out details A and B to be shown at increased scales on further sheets. Sheet 2 contains enlarged detail views of sections A and B at the specified scales. Sheet 3 provides a section view of detail D-D at a scale of 1:1 and includes no other information.
Entrega grifo final Juan Ospina
This engineering drawing document contains details for sheet 1 of 1, including three sections labeled A, B, and C with dimensions and a scale of 1:1 or 2:1. It was drawn by Juan Ozpina on June 6, 2016 for an unspecified title, size, and revision number.
Plano y modelado grifería Mónica Cadena
The document contains technical drawings for plumbing fixtures (griferia) with measurements in millimeters. It includes general plans and a side view of the plumbing fixtures with labeled dimensions. The drawings were created by Mónica Cadena on May 6, 2016 and include a title block with her name and the date.
Presentacion final
This document contains engineering drawings for a faucet called "Grifo Armonia" including:
- Isometric, top, front and side views of the faucet at a scale of 1:3
- Isometric, top, front and side views of the faucet handle at a scale of 1:1
- Isometric, front, top and side views of the faucet base at scales of 1:1 and 1:2
- Cross sections A-A and B-B at a scale of 1:2
- Front and side views of the faucet with cross sections at a scale of 1:2
- Detail views A and B of parts at a
Grifo javier
The document contains engineering drawings for a faucet or tap including dimensions and specifications. There are three sheets showing different views of the faucet with labels for parts and scales. The drawings include details like dimensions, tolerances, titles, dates, and approval signatures.
BRACKET.0001
This document contains engineering drawings for a bracket, including dimensions, tolerances, and bend specifications. Fifteen bends are specified, most at 90 degrees but some at 44 or 88 degrees, with radii ranging from 0.016 to 0.75 inches. The drawing includes two tables with dimensional specifications across eight numbered rows and bend details across fifteen numbered rows.
protfolio concept
This document contains drawings and part lists for an angle support assembly. The drawings depict the individual parts that make up the assembly including a base, jaw, key, screws, and handle rod. The part list identifies 5 parts that are included in the assembly by part number and quantity.
Weldments Demo
The document appears to be an engineering drawing showing the dimensions and features of a welded assembly. It includes labeled views and measurements for various parts that are to be welded together, including rectangular sections of different lengths, thicknesses and widths. The drawing also lists the date it was drawn, the part number, title and other production details.
Recommended
Planos tecnicos
This document contains engineering drawings across 3 sheets. Sheet 1 provides overall dimensions for a design and calls out details A and B to be shown at increased scales on further sheets. Sheet 2 contains enlarged detail views of sections A and B at the specified scales. Sheet 3 provides a section view of detail D-D at a scale of 1:1 and includes no other information.
Entrega grifo final Juan Ospina
This engineering drawing document contains details for sheet 1 of 1, including three sections labeled A, B, and C with dimensions and a scale of 1:1 or 2:1. It was drawn by Juan Ozpina on June 6, 2016 for an unspecified title, size, and revision number.
Plano y modelado grifería Mónica Cadena
The document contains technical drawings for plumbing fixtures (griferia) with measurements in millimeters. It includes general plans and a side view of the plumbing fixtures with labeled dimensions. The drawings were created by Mónica Cadena on May 6, 2016 and include a title block with her name and the date.
Presentacion final
This document contains engineering drawings for a faucet called "Grifo Armonia" including:
- Isometric, top, front and side views of the faucet at a scale of 1:3
- Isometric, top, front and side views of the faucet handle at a scale of 1:1
- Isometric, front, top and side views of the faucet base at scales of 1:1 and 1:2
- Cross sections A-A and B-B at a scale of 1:2
- Front and side views of the faucet with cross sections at a scale of 1:2
- Detail views A and B of parts at a
Grifo javier
The document contains engineering drawings for a faucet or tap including dimensions and specifications. There are three sheets showing different views of the faucet with labels for parts and scales. The drawings include details like dimensions, tolerances, titles, dates, and approval signatures.
BRACKET.0001
This document contains engineering drawings for a bracket, including dimensions, tolerances, and bend specifications. Fifteen bends are specified, most at 90 degrees but some at 44 or 88 degrees, with radii ranging from 0.016 to 0.75 inches. The drawing includes two tables with dimensional specifications across eight numbered rows and bend details across fifteen numbered rows.
protfolio concept
This document contains drawings and part lists for an angle support assembly. The drawings depict the individual parts that make up the assembly including a base, jaw, key, screws, and handle rod. The part list identifies 5 parts that are included in the assembly by part number and quantity.
Weldments Demo
The document appears to be an engineering drawing showing the dimensions and features of a welded assembly. It includes labeled views and measurements for various parts that are to be welded together, including rectangular sections of different lengths, thicknesses and widths. The drawing also lists the date it was drawn, the part number, title and other production details.
Project 8-35
This engineering drawing shows the details for a Homework Project 8-35, including dimensions for 8 different parts labeled A through D. It was drawn by Brian Terrill on February 1st, 2016 for a project measuring 95 inches by 50 inches.
45 Deg Final Pipe line
This document is a technical drawing for a 45 degree final pipe line. It contains 16 labeled sections from A to P and notes that it is sheet 1 of 1. The drawing was created by Abdullah Abdelazeem on September 9, 2015 for a 45 degree final pipe line.
Hub III
This document contains details for two separate parts labeled Detail A and Detail B, both drawn to a scale of 1:1. It also includes basic dimensioning for several features labeled A through D, identifies the sheet as sheet 1 of 1, and provides metadata such as the date, drawing number, title, size, and revision level. The document was produced using an Autodesk educational product.
Capex
This document outlines historical and projected capital expenditures (Capex), depreciation & amortization (D&A), and other key metrics for an asset from 2014-2027. It shows:
1) Capex has increased each period from $1.3B in 2014 to a forecasted $35.2B in 2025 while D&A has also risen from $231.9M to a projected $17B for 2027.
2) Various Capex-to-revenue and D&A-to-revenue percentages are provided for comparison over time.
3) D&A is forecasted out annually showing declining amounts each year as assets depreciate.
chapter7 question#5
This document contains a technical drawing with dimensions and specifications for a mechanical part. It includes views showing the part from different angles and with labeled dimensions. Key details are that it has 4 holes, a hexagonal shape with 0.75 inch sides, and a surface marked to be rounded and have 0.12 inch fillets.
Part Rak Sepatu
This document contains engineering drawings for a 3-tier shoe rack. It includes 7 different views of the shoe rack at various scales, from 1:1 to 2:1, as well as 2 detail views at scales of 1/2 and 1/3. The drawings show the dimensions and specifications for all parts of the shoe rack, which is made of wood, and was drawn by Mohammad Zakir and approved on December 7, 2013.
prezentacija
The document contains data from 11 questions (Q1-Q11) with measurements for variables a through l. For each question, the data is presented in tables with the variables on the y-axis and the questions identified on the x-axis. Charts are then shown graphing the variables for selected questions.
10000ltrs Mixing Machine
This document appears to be a technical drawing containing measurements and specifications for a mechanical part. It includes 12 numbered measurements in millimeters. The drawing is sheet 1 of 1, was drawn on 4/4/2014, and is for a part being manufactured by KMT Precision Engineering Ltd in Ota.
Intro VAE
This document summarizes a seminar presented by Panichi Sumimoto on September 2, 2018 at Bread House about introducing variational autoencoders (VAEs). The presentation covered the basics of VAEs, how they can be used for image generation tasks, and extensions like VAE-GANs that combine VAEs with generative adversarial networks. Examples of datasets used for training included CelebA, CelebA-HQ and LSUN bedrooms.
Ut t04
The document contains two tables showing measurements for points on a shell plan and roof plan. The shell plan table lists point numbers, measurements for 15 points, and notes N/A for some empty cells. The roof plan table similarly lists 6 points and measurements, along with labels for various locations around the roof perimeter.
Cuisine sheet plan
This document contains architectural drawings for a cuisine design project including floor plans, elevations, and callouts showing wall dimensions. The floor plan shows the layout of the space with room names and dimensions. Elevation drawings show the space from two sides with level lines and dimensional callouts. Details include wall construction dimensions and cabinetry.
X11
The document is a technical drawing showing the final design layout for pipes, tanks, and their positions. It includes dimensions for various pipes and tanks, including five large tanks ranging in size from 1900 to 5700 units, and smaller connecting pipes and tanks. The drawing also lists part names corresponding to labels on the diagram.
Boiler 3 & 4 Assembly
This document discusses converting Boilers 3 and 4 from coal to gas at the Acacia Boilers plant. Boilers 3 and 4 will be modified to run on gas instead of coal to reduce emissions. The conversion of these two boilers to gas will help the Acacia Boilers plant lower its environmental impact.
Tbk toeic hki 16đh 8_cđ
This document contains a class schedule for the first semester of the 2012 school year for class DH16 CD8. It lists 87 classes with information about the class name, meeting days and periods, number of students, room number, and instructor for each class. The classes cover a range of subjects and meet on different days from Monday to Friday during periods 1 through 7.
Entwistle_Geoffrey_CAD_Portfolio_January_2015
This document contains technical drawings and specifications for several mechanical parts and assemblies:
1) An aluminum 4-cylinder engine block with detailed dimensions and notes specifying the material and scale of views.
2) A hinge pin assembly with dimensions for several subcomponents to be made from various materials like 3D printed plastic and machined metal.
3) A sheet metal sled cutout pattern with dimensions for a part to be cut from 14-gauge steel sheet.
4) An exploded view assembly drawing of a ball switcher machine with a parts list and notes on materials for the components.
Impementing cellular manufacturing
The document discusses the implementation of cellular manufacturing at Pakistan Spring & Engineering Co. It aims to shorten lead times, reduce inventory, improve quality, simplify production scheduling and reduce setup time. It proposes organizing machines into cells based on the parts and operations. It analyzes the production operations and recommends forming two cells - a U-shaped cell for the first cluster with in-sequence moves and a rectangular cell for the second cluster with backtracking moves. This would significantly reduce transportation and motion waste.
Abrazadera
This document appears to contain a technical drawing, as it includes dimensions, tolerances, and references to parts like an "ABRAZADERA". The drawing includes labeled lines denoting lengths, widths, depths, and radii for various sections of what is likely a mechanical assembly or part. Key dimensions shown are 54mm, 13mm, 9mm, and 46mm.
Base
This document appears to be a bill of materials or parts list containing various items and their quantities. It includes several line items with descriptions like A, B, C, D and their corresponding quantities which range from 1 to 100. The document also lists a 'BASE' quantity twice and was designed, checked and approved by Lenovo on November 23, 2021.
2016 2017-ppqs-algebra-ms (1)
This document provides a list of 11 past paper questions from the 2016 and 2017 IGCSE Extended Mathematics exams. Each question is identified by the exam paper and question number. The document summarizes topical past paper answers for the Algebra section of the exam. MrMannMaths watermarks appear between groups of questions.
COMPUTER MOUSE-1
This parts list document contains 5 items needed to build a computer mouse including an ABS plastic base, lateral grip, and cover, a rubber scroll wheel, and ABS plastic side buttons. The document provides the material, description, and quantity of each part.
Post marxismo, neo marxismo, диамат, диалектический материализм, dialektičesk...
Post marxismo, neo marxismo, диамат, диалектический материализм, dialektičesk...UNIVERSITY OF COIMBRA
Saggio post marxista su Walter Benjamin, di Massimo MorigiIFRS16
The International Accounting Standards Board (IASB) and Financial Accounting Standards Board (FASB) released new global lease accounting standards in 2016 that will significantly impact companies. The new guidance requires all leases to be reported on company balance sheets by recognizing new assets and liabilities for operating leases. It also expands what is considered part of the lease term and requires reassessment of lease accounting due to contract modifications. Preparing for the changes, which take effect in January 2019, may require upgrades to leasing software and systems and will involve analyzing thousands of leases.
More Related Content
What's hot
Project 8-35
This engineering drawing shows the details for a Homework Project 8-35, including dimensions for 8 different parts labeled A through D. It was drawn by Brian Terrill on February 1st, 2016 for a project measuring 95 inches by 50 inches.
45 Deg Final Pipe line
This document is a technical drawing for a 45 degree final pipe line. It contains 16 labeled sections from A to P and notes that it is sheet 1 of 1. The drawing was created by Abdullah Abdelazeem on September 9, 2015 for a 45 degree final pipe line.
Hub III
This document contains details for two separate parts labeled Detail A and Detail B, both drawn to a scale of 1:1. It also includes basic dimensioning for several features labeled A through D, identifies the sheet as sheet 1 of 1, and provides metadata such as the date, drawing number, title, size, and revision level. The document was produced using an Autodesk educational product.
Capex
This document outlines historical and projected capital expenditures (Capex), depreciation & amortization (D&A), and other key metrics for an asset from 2014-2027. It shows:
1) Capex has increased each period from $1.3B in 2014 to a forecasted $35.2B in 2025 while D&A has also risen from $231.9M to a projected $17B for 2027.
2) Various Capex-to-revenue and D&A-to-revenue percentages are provided for comparison over time.
3) D&A is forecasted out annually showing declining amounts each year as assets depreciate.
chapter7 question#5
This document contains a technical drawing with dimensions and specifications for a mechanical part. It includes views showing the part from different angles and with labeled dimensions. Key details are that it has 4 holes, a hexagonal shape with 0.75 inch sides, and a surface marked to be rounded and have 0.12 inch fillets.
Part Rak Sepatu
This document contains engineering drawings for a 3-tier shoe rack. It includes 7 different views of the shoe rack at various scales, from 1:1 to 2:1, as well as 2 detail views at scales of 1/2 and 1/3. The drawings show the dimensions and specifications for all parts of the shoe rack, which is made of wood, and was drawn by Mohammad Zakir and approved on December 7, 2013.
prezentacija
The document contains data from 11 questions (Q1-Q11) with measurements for variables a through l. For each question, the data is presented in tables with the variables on the y-axis and the questions identified on the x-axis. Charts are then shown graphing the variables for selected questions.
10000ltrs Mixing Machine
This document appears to be a technical drawing containing measurements and specifications for a mechanical part. It includes 12 numbered measurements in millimeters. The drawing is sheet 1 of 1, was drawn on 4/4/2014, and is for a part being manufactured by KMT Precision Engineering Ltd in Ota.
Intro VAE
This document summarizes a seminar presented by Panichi Sumimoto on September 2, 2018 at Bread House about introducing variational autoencoders (VAEs). The presentation covered the basics of VAEs, how they can be used for image generation tasks, and extensions like VAE-GANs that combine VAEs with generative adversarial networks. Examples of datasets used for training included CelebA, CelebA-HQ and LSUN bedrooms.
Ut t04
The document contains two tables showing measurements for points on a shell plan and roof plan. The shell plan table lists point numbers, measurements for 15 points, and notes N/A for some empty cells. The roof plan table similarly lists 6 points and measurements, along with labels for various locations around the roof perimeter.
Cuisine sheet plan
This document contains architectural drawings for a cuisine design project including floor plans, elevations, and callouts showing wall dimensions. The floor plan shows the layout of the space with room names and dimensions. Elevation drawings show the space from two sides with level lines and dimensional callouts. Details include wall construction dimensions and cabinetry.
X11
The document is a technical drawing showing the final design layout for pipes, tanks, and their positions. It includes dimensions for various pipes and tanks, including five large tanks ranging in size from 1900 to 5700 units, and smaller connecting pipes and tanks. The drawing also lists part names corresponding to labels on the diagram.
Boiler 3 & 4 Assembly
This document discusses converting Boilers 3 and 4 from coal to gas at the Acacia Boilers plant. Boilers 3 and 4 will be modified to run on gas instead of coal to reduce emissions. The conversion of these two boilers to gas will help the Acacia Boilers plant lower its environmental impact.
Tbk toeic hki 16đh 8_cđ
This document contains a class schedule for the first semester of the 2012 school year for class DH16 CD8. It lists 87 classes with information about the class name, meeting days and periods, number of students, room number, and instructor for each class. The classes cover a range of subjects and meet on different days from Monday to Friday during periods 1 through 7.
Entwistle_Geoffrey_CAD_Portfolio_January_2015
This document contains technical drawings and specifications for several mechanical parts and assemblies:
1) An aluminum 4-cylinder engine block with detailed dimensions and notes specifying the material and scale of views.
2) A hinge pin assembly with dimensions for several subcomponents to be made from various materials like 3D printed plastic and machined metal.
3) A sheet metal sled cutout pattern with dimensions for a part to be cut from 14-gauge steel sheet.
4) An exploded view assembly drawing of a ball switcher machine with a parts list and notes on materials for the components.
Impementing cellular manufacturing
The document discusses the implementation of cellular manufacturing at Pakistan Spring & Engineering Co. It aims to shorten lead times, reduce inventory, improve quality, simplify production scheduling and reduce setup time. It proposes organizing machines into cells based on the parts and operations. It analyzes the production operations and recommends forming two cells - a U-shaped cell for the first cluster with in-sequence moves and a rectangular cell for the second cluster with backtracking moves. This would significantly reduce transportation and motion waste.
Abrazadera
This document appears to contain a technical drawing, as it includes dimensions, tolerances, and references to parts like an "ABRAZADERA". The drawing includes labeled lines denoting lengths, widths, depths, and radii for various sections of what is likely a mechanical assembly or part. Key dimensions shown are 54mm, 13mm, 9mm, and 46mm.
Base
This document appears to be a bill of materials or parts list containing various items and their quantities. It includes several line items with descriptions like A, B, C, D and their corresponding quantities which range from 1 to 100. The document also lists a 'BASE' quantity twice and was designed, checked and approved by Lenovo on November 23, 2021.
2016 2017-ppqs-algebra-ms (1)
This document provides a list of 11 past paper questions from the 2016 and 2017 IGCSE Extended Mathematics exams. Each question is identified by the exam paper and question number. The document summarizes topical past paper answers for the Algebra section of the exam. MrMannMaths watermarks appear between groups of questions.
COMPUTER MOUSE-1
This parts list document contains 5 items needed to build a computer mouse including an ABS plastic base, lateral grip, and cover, a rubber scroll wheel, and ABS plastic side buttons. The document provides the material, description, and quantity of each part.
What's hot (20)
Viewers also liked
Post marxismo, neo marxismo, диамат, диалектический материализм, dialektičesk...
Post marxismo, neo marxismo, диамат, диалектический материализм, dialektičesk...UNIVERSITY OF COIMBRA
Saggio post marxista su Walter Benjamin, di Massimo MorigiIFRS16
The International Accounting Standards Board (IASB) and Financial Accounting Standards Board (FASB) released new global lease accounting standards in 2016 that will significantly impact companies. The new guidance requires all leases to be reported on company balance sheets by recognizing new assets and liabilities for operating leases. It also expands what is considered part of the lease term and requires reassessment of lease accounting due to contract modifications. Preparing for the changes, which take effect in January 2019, may require upgrades to leasing software and systems and will involve analyzing thousands of leases.
Maltrato animal.arceo jimenez 204
Este documento resume la información sobre la Sociedad Valenciana Protectora de Animales y Plantas (SVPAP). Explica que la SVPAP es una asociación privada sin ánimo de lucro fundada en 1973 para proteger el bienestar animal. La sede de SVPAP y su clínica veterinaria se encuentran en Valencia, y también tienen un refugio para animales en San Antonio de Benagéber. El documento también discute brevemente los derechos de los animales y los motivos para evitar la violencia contra los animales.
Casa del anciano tizimin
La casa del anciano tiene como misión proporcionar atención integral física a las personas de edad avanzada para mejorar su calidad de vida. Sus valores incluyen el espíritu de servicio, el respeto, la acogida, la escucha activa y la misericordia. Su visión es convertirse en una institución líder en la ciudad de Tizimin y sus alrededores para brindar esperanza a las personas mayores y mejorar su futuro.
Réseaux Sociaux : pourquoi y aller et comment s'y mettre
Première approche des réseaux sociaux : l'essor des réseaux sociaux et les étapes essentielles pour se lancer.
Slides présentées lors de l'afterwork en partenariat avec les réseau Links.
La oruga glotona cuento
Este documento presenta información sobre un autor de pictogramas llamado Sergio Palao, cuya obra proviene de ARASAAC y está licenciada bajo CC (BY-NC-AS). También menciona una adaptación del cuento "El monstruo rosa" realizada por Mar Vieites Alonso.
Robert busen- Biografia
Robert Wilhelm Eberhard von Bunsen foi um químico alemão que viveu de 1811 a 1899. Ele fez descobertas importantes sobre a solubilidade de sais metálicos e desenvolveu métodos para produzir metais puros por eletrólise. Bunsen também estudou espectros de emissão de elementos aquecidos e aperfeiçoou o queimador de gás, inventado por Faraday, que é conhecido como bico ou queimador de Bunsen.
Rice breedingin india satyendra
The PPP describes the journey of rice breeding in India. It also describes the present status of rice breeding in respect of biotic and abiotic stresses in view of climate change. It also suggests some strategical points for future rice breeding programme.
Youthreach conference 2017
This presentation discusses how to use various information and communication technologies (ICT) to create, share, and organize educational content and learner records. It provides guidance on creating interactive quizzes using Kahoot and sharing presentations through SlideShare. It also demonstrates how to create instructional videos and embed them in PowerPoint presentations, convert presentations to video format, and upload videos to YouTube to share with other educators and learners. Integrated learner records are also discussed as a way to structure learning, communicate expectations to students, and make the educator's job easier.
Planificación anual-cuarto-grado 2017
Este documento presenta un ejemplo de planificación anual para el cuarto grado de primaria. Incluye los propósitos de aprendizaje organizados por áreas, la distribución del tiempo en unidades didácticas a lo largo de los tres trimestres y los enfoques transversales abordados. El objetivo es distribuir los aprendizajes del año a través de unidades didácticas integradas por trimestres.
CASTING -TARA'S BLOG
This document discusses casting choices for characters in a teen drama. It proposes using specific actors for the roles of Jess, Harry, Lola, Ethan, Susan, and Liv and Josh. For each role, it provides reasons why that actor fits the character, noting similarities between the actor's personality or interests and those of the character. It focuses on choosing actors that reflect the "archetypal teen image" and will help audiences relate to the characters and world of the story.
Planificación anual-primer-grado 2017
Este documento presenta un ejemplo de planificación anual para el primer grado de primaria. Incluye los propósitos de aprendizaje organizados por áreas para el año escolar, distribuidos en unidades didácticas a lo largo de cuatro bimestres. También presenta los enfoques transversales que se abordarán en cada unidad, así como las competencias transversales que los estudiantes desarrollarán durante el curso. El objetivo es distribuir de manera organizada los aprendizajes que se espera que los estudiantes desarroll
Viewers also liked (12)
Post marxismo, neo marxismo, диамат, диалектический материализм, dialektičesk...
Post marxismo, neo marxismo, диамат, диалектический материализм, dialektičesk...
Réseaux Sociaux : pourquoi y aller et comment s'y mettre
Réseaux Sociaux : pourquoi y aller et comment s'y mettre
More from alejo velandia
grifo
El documento presenta los planos técnicos y la ficha técnica de un grifo para lavaplatos. El grifo está hecho de acero inoxidable, mide 135 x 150 mm, y tiene un caudal de 0.5 GPM. Sus características incluyen una entrada de agua de 1/2 pulgadas, una presión de agua de 0.5 a 0.7 MPa, y una zona de detención de 17 cm. El grifo economiza agua hasta un 70% y tiene un diseño ergonómico y resistente.
grifo
El documento describe un grifo de lavamanos hecho de acero inoxidable con medidas de 135 x 150 mm. Tiene un caudal de 0.5 GPM, un diámetro de entrada de agua de 1/2 pulgadas y una presión de agua de 0.5 a 0.7 Mpa. Sus características incluyen piezas interiores resistentes a la corrosión, una zona de detención de 17 cm y la capacidad de ahorrar hasta un 70% de agua. El grifo fue inspirado en formas inorgánicas para proporcionar un manejo
Ensayo merdotecnia k
El documento describe las relaciones entre la mercadotecnia, la publicidad y el diseño industrial. Explica que la mercadotecnia es un proceso social que permite a las personas obtener lo que necesitan y desean a través de la creación y el intercambio de productos. También describe cómo la publicidad y el diseño industrial trabajan juntos para identificar las necesidades de los consumidores y crear productos que generen más consumismo y satisfagan esas necesidades. Finalmente, argumenta que estas tres áreas están estrechamente relacionadas y se enfocan en estudiar a
Ensayo merdotecnia k
El documento describe las relaciones entre la mercadotecnia, la publicidad y el diseño industrial. Explica que la mercadotecnia es un proceso social que permite a las personas obtener lo que necesitan y desean a través de la creación y el intercambio de productos. También describe cómo la publicidad y el diseño industrial usan técnicas visuales y de marketing para generar deseos de consumo y mantener a la humanidad bajo el dominio del mercado a través de la satisfacción constante de necesidades creadas. Finalmente, reconoce que estas tres á
Usb para blog
Este documento describe una memoria USB inspirada en los modelos de Lego Star Wars. La memoria USB es blanca y está diseñada para ser resistente, cómoda de agarrar y fácil de deslizar para conectar sin problemas al computador. El documento también incluye planos del producto y los pasos para usar la memoria USB.
More from alejo velandia (6)
Recently uploaded
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Actions and Commands:
Tap, Swipe, and Pinch
Rotate and Shake -Buttons -Menu Bars – Menus
Toolbars - Links- Action Panels
Hover Tools - Keyboard Actions- Drag-and-Drop
Typed Commands-Affordance-Direct Manipulation.
Forms and Controls:
Basics of Form Design
Patterns.
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
UNIT IV-VISUAL STYLE AND MOBILE INTERFACES.pptx
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!
Top Interior Designers in Bangalore.pdf1
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
一比一原版(UW毕业证)西雅图华盛顿大学毕业证如何办理
UW毕业证学历书【微信95270640】做UW文凭、办UW文凭、买UW文凭Q微信95270640买办国外文凭UW毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UW学历文凭、UW假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理西雅图华盛顿大学西雅图华盛顿大学毕业证假文凭流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！实伙伴平时山娃上学阿黑也摇头晃脑地跟去暑假用不着上学阿黑更是天天围着山娃转山娃上山除了察看埋下的野兽铁夹子看护早上逐上山的大黄牛外也觅着采草药摘红菇积攒起来拿到镇上卖山娃知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思片
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
一比一原版(Columbia毕业证)哥伦比亚大学毕业证如何办理
Columbia毕业证offer【微信95270640】☀《哥伦比亚大学毕业证购买》Q微信95270640《Columbia毕业证文凭补》文凭、本科、硕士、研究生学历都可以做,留信认证的作用：
1：该专业认证可证明留学生真实留学身份。
2：同时对留学生所学专业等级给予评定。
3：国家专业人才认证中心颁发入库证书
4：这个入网证书并且可以归档到地方
5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在网内查询个人身份证信息后，同步读取人才网入库信息。
6：个人职称评审加20分。
7：个人信誉贷款加10分。
8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才《文凭Columbia毕业证书原版制作Columbia成绩单》仿制Columbia毕业证成绩单哥伦比亚大学学位证书pdf电子图》。
办国外哥伦比亚大学哥伦比亚大学毕业证录取书教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1哥伦比亚大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外哥伦比亚大学哥伦比亚大学毕业证录取书办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。我们的亲人生我养我的父母您们的年迈的苍老换来了我们新一代的新鲜与活力无论我们在哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗的
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
Storytelling For The Web: Integrate Storytelling in your Design Process
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
Technoblade The Legacy of a Minecraft Legend.
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
Revolutionizing the Digital Landscape: Web Development Companies in India
Discover unparalleled creativity and technical prowess with India's leading web development companies. From custom solutions to e-commerce platforms, harness the expertise of skilled developers at competitive prices. Transform your digital presence, enhance the user experience, and propel your business to new heights with innovative solutions tailored to your needs, all from the heart of India's tech industry.
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
原版定做(penn毕业证书)美国宾夕法尼亚大学毕业证文凭学历证书原版一模一样
原版纸张【微信：741003700 】【(penn毕业证书)美国宾夕法尼亚大学毕业证、文凭学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Storytelling For The Web: Integrate Storytelling in your Design Process
Storytelling For The Web: Integrate Storytelling in your Design Process
Revolutionizing the Digital Landscape: Web Development Companies in India
Revolutionizing the Digital Landscape: Web Development Companies in India
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Connect Conference 2022: Passive House - Economic and Environmental Solution...
PDF SubmissionDigital Marketing Institute in Noida
PDF SubmissionDigital Marketing Institute in Noida
Grifo
- 1. 1 1 2 2 3 3 4 4 5 5 6 6 A A B B C C D D Alejo 6/06/2016 Designed by Checked by Approved by Date 1 / 1 Edition Sheet Date 1,87 1,44 0,88 1,29 2,28 2,19 2,31 0,79 2,04 2,45 1,39 3,472,26 2,26 2,77 3,47
- 2. 1 1 2 2 3 3 4 4 5 5 6 6 A A B B C C D D Alejo 6/06/2016 Designed by Checked by Approved by Date 1 / 1 Edition Sheet Date 44,23 8,59 R70,81 R84,52 30,00 6,48 44,99 11,88 2,50 30,00 2,02 9,37 85,44 30,26 6,48 44,99