PCB Gold Line
•
1 like•475 views
New Gold Line installed at our domestic bare printed circuit board (PCB) fabrication facility last December.
Report
Share
Report
Share
Download to read offline
Recommended
VTT Visions: Low Carbon Finland 2050
The EU low-carbon economy targets for 2050 are strict, but within Finland's reach, according to VTT. Greenhouse gas emissions can be reduced by as much as 90 per cent if clean energy technologies are developed and adopted at an accelerated pace in energy production, industry, housing and transport.
Low Carbon Finland 2050 is a self-financed strategic research project of VTT that supports VTT's own long-term operational planning. The project combines technological expertise from various areas of competence within VTT, from low-carbon and smart energy systems to foresight and energy system modelling.
New Historic Hotels Of Slovakia For Hhe
Historic Hotels of Slovakia -presentation at general assembly Historic Hotels of Europe, Portugal OC 2009
North American PCB Manufacturer
2013 Corporate Presentation for Saturn Electronics Corporation, domestic bare printed circuit board manufacturer.
Pcb cross-section
Domestic circuit board fabricator providing mircosectioning in in-house laboratory for cross sections on microvias.
PCB Certifications: Industry Evaluation
Results of a recent survey of the top 40 domestic bare printed circuit board manufacturers. The survey evaluated the PCB fabricators on the following quality system certifications: UL, ITAR, C 7000, AS9100 and TS16949.
Recommended
VTT Visions: Low Carbon Finland 2050
The EU low-carbon economy targets for 2050 are strict, but within Finland's reach, according to VTT. Greenhouse gas emissions can be reduced by as much as 90 per cent if clean energy technologies are developed and adopted at an accelerated pace in energy production, industry, housing and transport.
Low Carbon Finland 2050 is a self-financed strategic research project of VTT that supports VTT's own long-term operational planning. The project combines technological expertise from various areas of competence within VTT, from low-carbon and smart energy systems to foresight and energy system modelling.
New Historic Hotels Of Slovakia For Hhe
Historic Hotels of Slovakia -presentation at general assembly Historic Hotels of Europe, Portugal OC 2009
North American PCB Manufacturer
2013 Corporate Presentation for Saturn Electronics Corporation, domestic bare printed circuit board manufacturer.
Pcb cross-section
Domestic circuit board fabricator providing mircosectioning in in-house laboratory for cross sections on microvias.
PCB Certifications: Industry Evaluation
Results of a recent survey of the top 40 domestic bare printed circuit board manufacturers. The survey evaluated the PCB fabricators on the following quality system certifications: UL, ITAR, C 7000, AS9100 and TS16949.
SEC MBE PCB
New presentation for Saturn Electronics Corporation, Minority-Owned PCB Fabricator providing rigid and flexible circuit boards.
Transitioning from Rigid Fabricator to Flexible / Rigid-Flex PCB Fabrication
Transitioning from Rigid Fabricator to Flexible / Rigid-Flex PCB FabricationDomestic PCB Fabrication
Transitioning from rigid bare circuit board manufacturer to flexible / rigid-flex PCB fabricatorBare Board Reliability
PCBs are electronic real estate. Establishing the foundation for assembly, there is a direct correlation between the reliability of a final electronic product and the bare printed circuit board. There is much to knowing what it takes as both a buyer and a producer of of PCBs to ensure high-reliability PCB performance.
FR-4 PCBs for LED Applications: Testing Performance of PTH and Copper Pour In...
FR-4 PCBs for LED Applications: Testing Performance of PTH and Copper Pour In...Domestic PCB Fabrication
FR-4 Circuit Boards: Testing the performance of PTH and Copper Pour instead of Metal Core PCBs in LED Applications. From the June issue of SMT Magazine. RF-Microwave PCB
SEC uses PTFE for our customer's Radio Frequency Microwave High Bandwidth applications. PTFE hybrids utilize Teflon in the dielectric material of the printed circuit board. Often synthesized with other high speed materials, our PTFE hybrid boards for RFMW incorporate the use of ceramic and other high-speed resin systems.
10k sq ft expansion of Domestic Board House
Check out these pics of the recent expansion to our Metro Detroit facility
PCB Clean Room, Circuit Board Imaging
It's paramount that a bare board manufacturer be adamant about ensuring the integrity of their clean room's maintenance.
LED Thermal Management: Free Consultation with Clemens Lasance at IPC APEX Ex...
LED Thermal Management: Free Consultation with Clemens Lasance at IPC APEX Ex...Domestic PCB Fabrication
Clemens Lasance is a recognized LED thermal management in the electronics cooling community.
A former Principal Scientist at Philips Research Clemens' main focus was the thermal management of Light Emitting Diodes for electronic systems.
Thermal Management for LED Printed Circuit Boards
In December 2009, he participated in the Thermal Management webinar, "MCPCBs for
LED Applications".
He currently serves on the Editorial Board for Electronics Cooling magazine.Automotive Circuit Boards; Electronic Manufacturing
Automotive PCB Fabrication Manufacturing presentation from TS16949 certified Saturn Electronics Corporation featuring special section automotive heat transfer and the latest company updates to include
PCB Manufacturer, Domestic Circuit Board Production and Prototype
Saturn Electronics Corporation is a Top 10 U.S. domestic bare printed circuit board manufacturer providing low-to-high volume production as well as complex prototypes and advanced technologies such as blind and buried vias, heavy copper, PTFE hybrids for RFMW and metal core for LED thermal management.
PCB Multilayer Lamination, Multilam Process Tour for Circuit Board Production
PCB Multilayer Lamination, Multilam Process Tour for Circuit Board ProductionDomestic PCB Fabrication
Multilayer Lamination Installation.
In 2010, installed a three hot press plus one cold press system, each press with ten openings.
5,000 SF building expansion to house these 3 10-opening Burkle PC-controlled lamination system, which is the most Automated System in North American (N.A.).
In addition, hot oil is used to heat the platens, thereby ensuring heat is applied uniformly to panels.Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
More Related Content
More from Domestic PCB Fabrication
SEC MBE PCB
New presentation for Saturn Electronics Corporation, Minority-Owned PCB Fabricator providing rigid and flexible circuit boards.
Transitioning from Rigid Fabricator to Flexible / Rigid-Flex PCB Fabrication
Transitioning from Rigid Fabricator to Flexible / Rigid-Flex PCB FabricationDomestic PCB Fabrication
Transitioning from rigid bare circuit board manufacturer to flexible / rigid-flex PCB fabricatorBare Board Reliability
PCBs are electronic real estate. Establishing the foundation for assembly, there is a direct correlation between the reliability of a final electronic product and the bare printed circuit board. There is much to knowing what it takes as both a buyer and a producer of of PCBs to ensure high-reliability PCB performance.
FR-4 PCBs for LED Applications: Testing Performance of PTH and Copper Pour In...
FR-4 PCBs for LED Applications: Testing Performance of PTH and Copper Pour In...Domestic PCB Fabrication
FR-4 Circuit Boards: Testing the performance of PTH and Copper Pour instead of Metal Core PCBs in LED Applications. From the June issue of SMT Magazine. RF-Microwave PCB
SEC uses PTFE for our customer's Radio Frequency Microwave High Bandwidth applications. PTFE hybrids utilize Teflon in the dielectric material of the printed circuit board. Often synthesized with other high speed materials, our PTFE hybrid boards for RFMW incorporate the use of ceramic and other high-speed resin systems.
10k sq ft expansion of Domestic Board House
Check out these pics of the recent expansion to our Metro Detroit facility
PCB Clean Room, Circuit Board Imaging
It's paramount that a bare board manufacturer be adamant about ensuring the integrity of their clean room's maintenance.
LED Thermal Management: Free Consultation with Clemens Lasance at IPC APEX Ex...
LED Thermal Management: Free Consultation with Clemens Lasance at IPC APEX Ex...Domestic PCB Fabrication
Clemens Lasance is a recognized LED thermal management in the electronics cooling community.
A former Principal Scientist at Philips Research Clemens' main focus was the thermal management of Light Emitting Diodes for electronic systems.
Thermal Management for LED Printed Circuit Boards
In December 2009, he participated in the Thermal Management webinar, "MCPCBs for
LED Applications".
He currently serves on the Editorial Board for Electronics Cooling magazine.Automotive Circuit Boards; Electronic Manufacturing
Automotive PCB Fabrication Manufacturing presentation from TS16949 certified Saturn Electronics Corporation featuring special section automotive heat transfer and the latest company updates to include
PCB Manufacturer, Domestic Circuit Board Production and Prototype
Saturn Electronics Corporation is a Top 10 U.S. domestic bare printed circuit board manufacturer providing low-to-high volume production as well as complex prototypes and advanced technologies such as blind and buried vias, heavy copper, PTFE hybrids for RFMW and metal core for LED thermal management.
PCB Multilayer Lamination, Multilam Process Tour for Circuit Board Production
PCB Multilayer Lamination, Multilam Process Tour for Circuit Board ProductionDomestic PCB Fabrication
Multilayer Lamination Installation.
In 2010, installed a three hot press plus one cold press system, each press with ten openings.
5,000 SF building expansion to house these 3 10-opening Burkle PC-controlled lamination system, which is the most Automated System in North American (N.A.).
In addition, hot oil is used to heat the platens, thereby ensuring heat is applied uniformly to panels.More from Domestic PCB Fabrication (20)
Transitioning from Rigid Fabricator to Flexible / Rigid-Flex PCB Fabrication
Transitioning from Rigid Fabricator to Flexible / Rigid-Flex PCB Fabrication
FR-4 PCBs for LED Applications: Testing Performance of PTH and Copper Pour In...
FR-4 PCBs for LED Applications: Testing Performance of PTH and Copper Pour In...
PCB Manufacturing: Bridging the Gap between Design and Fabrication
PCB Manufacturing: Bridging the Gap between Design and Fabrication
LED Thermal Management: Free Consultation with Clemens Lasance at IPC APEX Ex...
LED Thermal Management: Free Consultation with Clemens Lasance at IPC APEX Ex...
Automotive Circuit Boards; Electronic Manufacturing
Automotive Circuit Boards; Electronic Manufacturing
PCB Manufacturer, Domestic Circuit Board Production and Prototype
PCB Manufacturer, Domestic Circuit Board Production and Prototype
PCB Multilayer Lamination, Multilam Process Tour for Circuit Board Production
PCB Multilayer Lamination, Multilam Process Tour for Circuit Board Production
Recently uploaded
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
DevOps and Testing slides at DASA Connect
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
GridMate - End to end testing is a critical piece to ensure quality and avoid...
End to end testing is a critical piece to ensure quality and avoid regressions. In this session, we share our journey building an E2E testing pipeline for GridMate components (LWC and Aura) using Cypress, JSForce, FakerJS…
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
The Art of the Pitch: WordPress Relationships and Sales
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
UiPath Test Automation using UiPath Test Suite series, part 4
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Elevating Tactical DDD Patterns Through Object Calisthenics
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Recently uploaded (20)
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
FIDO Alliance Osaka Seminar: Passkeys and the Road Ahead.pdf
FIDO Alliance Osaka Seminar: Passkeys and the Road Ahead.pdf
GridMate - End to end testing is a critical piece to ensure quality and avoid...
GridMate - End to end testing is a critical piece to ensure quality and avoid...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Elizabeth Buie - Older adults: Are we really designing for our future selves?
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Epistemic Interaction - tuning interfaces to provide information for AI support
Epistemic Interaction - tuning interfaces to provide information for AI support
The Art of the Pitch: WordPress Relationships and Sales
The Art of the Pitch: WordPress Relationships and Sales
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
UiPath Test Automation using UiPath Test Suite series, part 4
UiPath Test Automation using UiPath Test Suite series, part 4
Elevating Tactical DDD Patterns Through Object Calisthenics
Elevating Tactical DDD Patterns Through Object Calisthenics
PCB Gold Line
- 1. Fully Automatic Immersion-Nickel Gold Line Installed December 2012
- 3. New Gold Line • Fully Automatic flight bar • Fully Automatic Timing