8. PROVEN GREEN BUILDING PRODUCTS + COST EFFECTIVE = PRACTIVAL ALTERNATIVE

11. HEALTH CONCERNS AUSTRALIAN LABELS DON’T PROTECT US

15. P2000 - Air Tight Thermal Panel P2000 Special EPS Non conductive Reflective Radiant Barrier Non conductive Reflective Radiant Barrier

17. We trust the Polystyrene Cup Will multiple layers be more effective?

18. P2000 is Durable and Flexible

21. BCA P2000- 3 IN 1 APPLICATION VAPOUR BARRIER THERMAL BREAK EFFICIENT INSULATOR

23. WHAT DO YOU CURRENTLY DO TO PREVENT CONDENSATION FORMING INSIDE THE BUILDING ENVELOPE?

25. CONDENSATION DEMO 150W HALOGEN COLD TILES INSULATION

26. Fibrous Insulation NO vapour barrier P2000 Condensation Barrier Vapour Barrier

27. As we increase our insulation due to requirements in the Building Codes we create a greater Delta T. Delta T can be the temperature difference between the inside and the outside of a residence and anywhere where there is a difference of 8 degrees or more condensation will form. A fully sealed vapour barrier should be mandatory for any builder who does not want warranty calls for mould. Please remember mould is a warranty defect and condensation is very hard to prevent, if prevention is not properly applied at the beginning of construction the costs to rectifying this later are insurmountable in comparison PLEASE NOTE: Foil wraps generally don’t carry a warranty and being over 90% metal have the ability to corrode. We suggest using P2000 which has a 20 year product warranty. PREVENTION

28. Cavity fill vs. Continuous cover Thermal break

29. Only 16mm of P2000 is required to insulated the above configuration as per BCA

30. With only 9mm additional of product is equivalent to +6.0 R-Value in fiberglass