P 101 ep 2-d
•Download as PPT, PDF•
0 likes•321 views
The document outlines guidelines for a wildfire prevention sign program, including conveying clear messages, using proper sign placement and mounts, and maintaining signs. It discusses developing a sign plan that specifies sign locations and types. The document also describes procurement procedures for ordering signs from approved vendors.
Report
Share
Report
Share
Recommended
Maintenance Management of Provincial and Kabupaten Roads
This document provides an overview of a project and workshop to support provincial and kabupaten road maintenance management in Indonesia. [1] The project will conduct reviews and pilots to strengthen road maintenance practices at the local level over two phases. [2] The workshop will gather input from various provinces and kabupatens on their current practices, needs, and opportunities to inform the scope of the second phase pilots. [3] Participants will discuss topics like maintenance funding, procedures, procurement, and potential support in breakout groups.
Pkrmmp phase 2 ntb workshop draft 3 ty-session 0
This document outlines a workshop on road maintenance management planning and funding options. It discusses the need to improve road maintenance practices at the provincial and district levels in Indonesia. A two-phase project is proposed to: 1) review current maintenance practices and funding, and 2) develop a systematic planning approach for maintenance in selected provinces and districts as a pilot model. The scope of work includes drafting road maintenance policies and planning procedures, conducting network surveys and workshops, and identifying sustainable maintenance planning and funding sources. The goal is to demonstrate the benefits of improved maintenance practices and secure adequate long-term funding.
Construction of roads presentations
This document provides information about road construction and maintenance. It lists group members and contents before discussing the introduction, classification, materials, machinery, and maintenance of roads. Key points include the types of roads and their financing, materials used like asphalt and aggregates, and machinery such as compactors, pavers, and planers. Maintenance methods are described as replacing pavement layers through hot or cold paving of thin layers.
Road Construction
This document summarizes the construction of a 6.5 km private road located in Ranipur, Haridwar, India. It describes the various layers that make up the roadway, including earthwork, granular sub-base, wet mix macadam, bituminous macadam, bituminous concrete, and finishing touches like kerbs and shoulders. The layers are constructed in sequential order, with careful compaction and mixing of aggregates and binders at each stage to support vehicular traffic on the carriageway. Proper camber is built into the road surface to allow for water drainage off the sides of the paved area.
S290 Unit 12 part 2
This document introduces the FLAME method for assessing current and expected fire behavior. FLAME stands for Fireline Assessment Method and allows firefighters to systematically evaluate changes that could significantly impact rate of spread. It provides predictions that align with observations from fatality fires. FLAME assessments can range from initial descriptions of current conditions to full applications combining predictions with timelines. Key factors like fuel type, wind speed, and weather are considered. Examples demonstrate how changes in these factors, such as from grass to litter fuels or increases in wind speed, can dramatically increase or decrease rate of spread through calculation of rate of spread ratios.
S290 Unit 12 part 1
This document discusses gauging fire behavior and guiding fireline decisions. It outlines objectives related to applying fire behavior information to safety decisions, calculating safety zone size, and identifying important changes in fire behavior. It also discusses factors that influence fire behavior like flame length, rate of spread, fuel type, wind, and slope. The document emphasizes anticipating the "next big change" in fire behavior to stay safe and provides examples of how to estimate future fire spread using current observations.
S290 Unit 11
This document discusses extreme wildland fire behavior. It describes the four common denominators of tragedy fires as occurring in light fuels, during shifts in wind, and when fires respond to topography. Extreme fire behavior results from a combination of dry fuels, windy conditions, low humidity, and unstable atmosphere. Three stages of crown fire development are discussed: passive, active, and independent. Spotting can occur over long distances and is influenced by firebrand sources, transport mechanisms, and receptive fuels. Probability of ignition tables are provided to assess the chance of a firebrand igniting a fire based on temperature and fuel moisture levels.
S290 Unit 10
This document provides an overview of fuel moisture, including:
- Defining critical live fuel moisture thresholds and describing how moisture content varies between different fuel types.
- Explaining the relationships between environmental factors like relative humidity, wind, precipitation and soil moisture on fuel moisture content.
- Describing the fuel moisture timelag concept and how it varies based on fuel size, and how this informs how quickly fuels dry out.
- Detailing the four dead fuel moisture timelag categories and methods to determine moisture content for each category.
- Explaining moisture of extinction and how it differs between various fuel models and natural fuel complexes.
- Providing a process and tables to determine moisture content of
Recommended
Maintenance Management of Provincial and Kabupaten Roads
This document provides an overview of a project and workshop to support provincial and kabupaten road maintenance management in Indonesia. [1] The project will conduct reviews and pilots to strengthen road maintenance practices at the local level over two phases. [2] The workshop will gather input from various provinces and kabupatens on their current practices, needs, and opportunities to inform the scope of the second phase pilots. [3] Participants will discuss topics like maintenance funding, procedures, procurement, and potential support in breakout groups.
Pkrmmp phase 2 ntb workshop draft 3 ty-session 0
This document outlines a workshop on road maintenance management planning and funding options. It discusses the need to improve road maintenance practices at the provincial and district levels in Indonesia. A two-phase project is proposed to: 1) review current maintenance practices and funding, and 2) develop a systematic planning approach for maintenance in selected provinces and districts as a pilot model. The scope of work includes drafting road maintenance policies and planning procedures, conducting network surveys and workshops, and identifying sustainable maintenance planning and funding sources. The goal is to demonstrate the benefits of improved maintenance practices and secure adequate long-term funding.
Construction of roads presentations
This document provides information about road construction and maintenance. It lists group members and contents before discussing the introduction, classification, materials, machinery, and maintenance of roads. Key points include the types of roads and their financing, materials used like asphalt and aggregates, and machinery such as compactors, pavers, and planers. Maintenance methods are described as replacing pavement layers through hot or cold paving of thin layers.
Road Construction
This document summarizes the construction of a 6.5 km private road located in Ranipur, Haridwar, India. It describes the various layers that make up the roadway, including earthwork, granular sub-base, wet mix macadam, bituminous macadam, bituminous concrete, and finishing touches like kerbs and shoulders. The layers are constructed in sequential order, with careful compaction and mixing of aggregates and binders at each stage to support vehicular traffic on the carriageway. Proper camber is built into the road surface to allow for water drainage off the sides of the paved area.
S290 Unit 12 part 2
This document introduces the FLAME method for assessing current and expected fire behavior. FLAME stands for Fireline Assessment Method and allows firefighters to systematically evaluate changes that could significantly impact rate of spread. It provides predictions that align with observations from fatality fires. FLAME assessments can range from initial descriptions of current conditions to full applications combining predictions with timelines. Key factors like fuel type, wind speed, and weather are considered. Examples demonstrate how changes in these factors, such as from grass to litter fuels or increases in wind speed, can dramatically increase or decrease rate of spread through calculation of rate of spread ratios.
S290 Unit 12 part 1
This document discusses gauging fire behavior and guiding fireline decisions. It outlines objectives related to applying fire behavior information to safety decisions, calculating safety zone size, and identifying important changes in fire behavior. It also discusses factors that influence fire behavior like flame length, rate of spread, fuel type, wind, and slope. The document emphasizes anticipating the "next big change" in fire behavior to stay safe and provides examples of how to estimate future fire spread using current observations.
S290 Unit 11
This document discusses extreme wildland fire behavior. It describes the four common denominators of tragedy fires as occurring in light fuels, during shifts in wind, and when fires respond to topography. Extreme fire behavior results from a combination of dry fuels, windy conditions, low humidity, and unstable atmosphere. Three stages of crown fire development are discussed: passive, active, and independent. Spotting can occur over long distances and is influenced by firebrand sources, transport mechanisms, and receptive fuels. Probability of ignition tables are provided to assess the chance of a firebrand igniting a fire based on temperature and fuel moisture levels.
S290 Unit 10
This document provides an overview of fuel moisture, including:
- Defining critical live fuel moisture thresholds and describing how moisture content varies between different fuel types.
- Explaining the relationships between environmental factors like relative humidity, wind, precipitation and soil moisture on fuel moisture content.
- Describing the fuel moisture timelag concept and how it varies based on fuel size, and how this informs how quickly fuels dry out.
- Detailing the four dead fuel moisture timelag categories and methods to determine moisture content for each category.
- Explaining moisture of extinction and how it differs between various fuel models and natural fuel complexes.
- Providing a process and tables to determine moisture content of
S290 Unit 9
This document discusses observing weather conditions on wildland fires. It describes the importance of weather observations for firefighter safety and monitoring fire behavior. Key tools for taking observations in the field include the belt weather kit, hand-held meters, and remote automated weather stations. The document provides guidance on when, how often and where to take observations, and covers techniques for using tools like the sling psychrometer to measure temperature, humidity and calculate dewpoint. Critical weather indicators that require close monitoring are also outlined.
S290 Unit 8
This document discusses various fire weather and predictive service products that help firefighters plan activities and determine fire potential. It describes products from Predictive Services groups within Geographic Area Coordination Centers that monitor fire weather and produce 7-day and monthly fire outlooks. It also discusses National Weather Service fire weather products like planning forecasts, NFDRS forecasts, spot forecasts, Red Flag Warnings, and smoke management forecasts that provide critical weather information for fire management. The importance of meteorologists like Incident Meteorologists on fires is also noted.
S290 Unit 7
This document provides an overview of wind systems and their effects on wildland fire behavior. It begins by defining wind and discussing how wind is the most critical factor influencing fire behavior. It then describes general winds caused by high and low pressure systems, as well as local winds like slope and valley winds. Critical winds that can drastically impact fires, such as cold fronts, foehn winds, and thunderstorm winds, are also outlined. The document provides details on characteristics and fire impacts of different wind types to help understand how winds affect wildland fire.
S290 Unit 6 part 2
The document discusses various atmospheric conditions and processes that can influence wildland fire behavior, including:
- Four lifting processes that can cause thunderstorms: thermals, orographic lift, frontal lift, and jet stream lift.
- The three stages of thunderstorm development: cumulus, mature, and dissipating.
- Visual indicators of stable and unstable atmospheric conditions.
- Different cloud types and groups, including six clouds that are critical for wildland firefighters to be aware of due to their implications for fire behavior.
S290 Unit 6 part 1
Atmospheric stability refers to the atmosphere's resistance to vertical air movement. There are three types of stability: stable, unstable, and neutral. Stable atmospheres suppress vertical air movement, while unstable atmospheres enhance it. Temperature lapse rates determine stability - a dry adiabatic lapse rate of -5.5°F per 1,000 feet indicates unstable air, while rates less than -5.5°F/1,000 feet indicate stable air. Moisture also impacts stability, with dry air generally being more stable. Understanding stability is important because it influences wildland fire behavior, with unstable conditions associated with extreme fire behavior.
S290 Unit 5
This document discusses concepts related to temperature and humidity, including:
- The relationship between dry bulb temperature, wet bulb temperature, dew point temperature, and relative humidity. As moisture increases, these values converge.
- Typical daily variations in temperature and relative humidity, with higher temperatures and lower humidity during the day and the reverse at night.
- How to use a psychrometric table to determine relative humidity, dew point, and wet bulb temperatures from dry bulb temperature.
- Factors like topography, vegetation, clouds, and wind that influence local temperature and humidity. Temperature and humidity vary based on aspects, elevation, and proximity to trees and cloud cover.
- Characteristics of continental and maritime air masses
S290 Unit 4
This document provides an overview of basic weather processes and the earth's atmosphere. It describes the structure and composition of the atmosphere, including the different layers. The troposphere, where nearly all weather occurs, contains over 75% of the atmosphere's gases. Temperature decreases with altitude in the troposphere and mesosphere and increases in the stratosphere and thermosphere. The key drivers of weather are solar radiation and the greenhouse effect of certain gases that retain heat in the lower atmosphere. Factors like terrain, moisture, and cloud cover also influence surface temperatures.
S290 Unit 3
This document covers wildland fuel characteristics and their impact on fire behavior. It discusses the components of fuels, including ground, surface and aerial fuels. It describes seven key fuel characteristics - loading, size/shape, compactness, horizontal/vertical continuity, moisture content and chemical content. It also defines the four dead fuel timelag categories and explains how fuel models are used to predict fire behavior based on typical fuel characteristics.
S290 Unit 2
This document covers Unit 2 of a training on topographic influences on wildland fire behavior. It discusses how topography affects fuels, fire spread, and barriers to fire spread. Specific topics include how elevation influences vegetation types; how slope, aspect, and drainages impact fire spread direction and rate; how ridges, canyons, and barriers interact with fire; and methods for determining slope in the field. The objectives are to understand topographic map features, and how topography influences fuels, fire behavior, and barriers.
S290 Unit 1
This document covers the fire environment and behavior. It discusses the three components of the fire environment triangle: fuels, weather, and topography. It also describes the three methods of heat transfer - conduction, convection, and radiation - and three methods of transporting firebrands. The relationship between flame height/length and fireline intensity is explained. Primary environmental factors affecting ignition, intensity, and rate of spread are listed. Different fire intensities are related to their environments. Standard fire behavior terminology is also introduced.
S290 Unit 0
This document provides an introduction to the S-290 Intermediate Wildland Fire Behavior course. It outlines the purpose of the course, which is to provide students with knowledge of wildland fire behavior applicable to safe and effective fire management. The objectives are to describe how fuels, weather, and topography influence fire behavior and safety, and to interpret wildland fire behavior and weather information. The document also reviews class expectations, evaluation methods, where this course fits within the fire behavior curriculum, and pre-course work.
Cabin Point Protection in Alaska
This document provides guidance on point protection strategies for structures like cabins threatened by wildfire in Alaska. It discusses developing a protection plan considering factors like time, fuels, resources. Key strategies include plumbing and defending the site with sprinklers during the fire, plumbing and leaving equipment to activate later, or conducting a burnout around the site in advance. The document provides detailed instructions on setting up sprinkler systems, installing sprinklers, positioning pumps, and other preparations to effectively protect structures from wildfire. Thorough planning, mapping, and considering logistics are emphasized.
AK Orientation part 2
The document provides guidance on firefighting strategies for tussock tundra at different relative humidity levels. It recommends direct attack using hand crews and retardant at 30% RH, with flame lengths up to 3 feet. At 20-30% RH, hand crews can work the flanks with aerial support, with potential 10 foot flame lengths at 15 mph winds. Below 20% RH, indirect tactics such as establishing control lines and burnout are recommended. It also stresses vigilance against potential spot fires and keeping an escape route available.
AK Orientation part 1
This document provides information for firefighters on fire behavior in black spruce forests in Alaska. It discusses how fire behavior changes based on relative humidity, from smoldering at 60% RH to dangerous crowning and spotting at 30% RH or lower. Specific predictions are given for rate of spread, flame lengths, and area growth at different humidity levels. Fuel models for predicting fire behavior in black spruce are also presented. The summary warns firefighters not to underestimate fires in black spruce, as conditions can change rapidly.
S215 unit 10
The document summarizes the final unit of a course. It states that the instructor will review the course material and explain the final exam process, which will be 75 multiple choice questions to be completed in 1 hour, requiring a score of 70% or higher to pass. It also notes there is an optional field exercise that reinforces key topics covered in the course through practical application.
S215 unit 9
The document discusses assessing the effectiveness of action plans and conducting after action reviews. It lists seven items that must be considered when assessing an action plan: whether the initial strategy and tactics are still valid and effective; if forecasts and predictions are still accurate; whether communication is adequate; if trigger points and management action points are still appropriate; if the plan accounts for new forecasts; and if resources need adjusting. It also indicates that action plans may need updating if the scenario changes, and that after action reviews identify lessons learned to improve future response.
S215 unit 8
This unit discusses tactical operations and resource use in the wildland-urban interface. It identifies different tactics for confronting a fire at a structure, including full or partial containment around the structure or no containment. The unit also outlines tactical uses of various resources like hand crews, aircraft, heavy equipment, and engines at interface incidents. Finally, it discusses methods for protecting structures during firing operations, such as burning out versus backfiring.
S215 unit 7
This document outlines the key points from a training unit on tactics for fighting fires in the wildland-urban interface. It discusses evaluating a structure's exterior, preparing the exterior, preparing the interior, and tasks to perform after the fire front passes. Example tasks include covering openings, clearing defensible space, and patrolling after the fire to check for hotspots. The presentation walks through a simulated wildfire scenario and how tactics may need to change based on fire growth and behavior. Maintaining vigilance even after the fire winds down is emphasized.
S215 unit 6
This document discusses structure protection tactics for wildland firefighting. It outlines seven structure protection tactical actions including defensive actions taken before, during, and after a fire front arrives, and offensive actions taken to suppress a wildfire before it reaches structures. Both static tactics like anchor and hold where resources remain in place, and dynamic tactics like bump and run where resources are mobile are described. Structure protection involves understanding when different tactics are appropriate based on current and predicted fire behavior.
S215 unit 5
The document discusses structure triage for wildland fires. It lists the four structure triage categories as defensible-prepare and hold, defensible-standalone, non-defensible-prepare and leave, and non-defensible-rescue. Firefighters must consider firefighter and public safety, fire behavior, surrounding fuels, available resources, and the structure's condition when determining the category. Conditions like over 25% roof involvement or interior room involvement may indicate a structure cannot be saved.
More Related Content
More from University of Alaska, Fairbanks
S290 Unit 9
This document discusses observing weather conditions on wildland fires. It describes the importance of weather observations for firefighter safety and monitoring fire behavior. Key tools for taking observations in the field include the belt weather kit, hand-held meters, and remote automated weather stations. The document provides guidance on when, how often and where to take observations, and covers techniques for using tools like the sling psychrometer to measure temperature, humidity and calculate dewpoint. Critical weather indicators that require close monitoring are also outlined.
S290 Unit 8
This document discusses various fire weather and predictive service products that help firefighters plan activities and determine fire potential. It describes products from Predictive Services groups within Geographic Area Coordination Centers that monitor fire weather and produce 7-day and monthly fire outlooks. It also discusses National Weather Service fire weather products like planning forecasts, NFDRS forecasts, spot forecasts, Red Flag Warnings, and smoke management forecasts that provide critical weather information for fire management. The importance of meteorologists like Incident Meteorologists on fires is also noted.
S290 Unit 7
This document provides an overview of wind systems and their effects on wildland fire behavior. It begins by defining wind and discussing how wind is the most critical factor influencing fire behavior. It then describes general winds caused by high and low pressure systems, as well as local winds like slope and valley winds. Critical winds that can drastically impact fires, such as cold fronts, foehn winds, and thunderstorm winds, are also outlined. The document provides details on characteristics and fire impacts of different wind types to help understand how winds affect wildland fire.
S290 Unit 6 part 2
The document discusses various atmospheric conditions and processes that can influence wildland fire behavior, including:
- Four lifting processes that can cause thunderstorms: thermals, orographic lift, frontal lift, and jet stream lift.
- The three stages of thunderstorm development: cumulus, mature, and dissipating.
- Visual indicators of stable and unstable atmospheric conditions.
- Different cloud types and groups, including six clouds that are critical for wildland firefighters to be aware of due to their implications for fire behavior.
S290 Unit 6 part 1
Atmospheric stability refers to the atmosphere's resistance to vertical air movement. There are three types of stability: stable, unstable, and neutral. Stable atmospheres suppress vertical air movement, while unstable atmospheres enhance it. Temperature lapse rates determine stability - a dry adiabatic lapse rate of -5.5°F per 1,000 feet indicates unstable air, while rates less than -5.5°F/1,000 feet indicate stable air. Moisture also impacts stability, with dry air generally being more stable. Understanding stability is important because it influences wildland fire behavior, with unstable conditions associated with extreme fire behavior.
S290 Unit 5
This document discusses concepts related to temperature and humidity, including:
- The relationship between dry bulb temperature, wet bulb temperature, dew point temperature, and relative humidity. As moisture increases, these values converge.
- Typical daily variations in temperature and relative humidity, with higher temperatures and lower humidity during the day and the reverse at night.
- How to use a psychrometric table to determine relative humidity, dew point, and wet bulb temperatures from dry bulb temperature.
- Factors like topography, vegetation, clouds, and wind that influence local temperature and humidity. Temperature and humidity vary based on aspects, elevation, and proximity to trees and cloud cover.
- Characteristics of continental and maritime air masses
S290 Unit 4
This document provides an overview of basic weather processes and the earth's atmosphere. It describes the structure and composition of the atmosphere, including the different layers. The troposphere, where nearly all weather occurs, contains over 75% of the atmosphere's gases. Temperature decreases with altitude in the troposphere and mesosphere and increases in the stratosphere and thermosphere. The key drivers of weather are solar radiation and the greenhouse effect of certain gases that retain heat in the lower atmosphere. Factors like terrain, moisture, and cloud cover also influence surface temperatures.
S290 Unit 3
This document covers wildland fuel characteristics and their impact on fire behavior. It discusses the components of fuels, including ground, surface and aerial fuels. It describes seven key fuel characteristics - loading, size/shape, compactness, horizontal/vertical continuity, moisture content and chemical content. It also defines the four dead fuel timelag categories and explains how fuel models are used to predict fire behavior based on typical fuel characteristics.
S290 Unit 2
This document covers Unit 2 of a training on topographic influences on wildland fire behavior. It discusses how topography affects fuels, fire spread, and barriers to fire spread. Specific topics include how elevation influences vegetation types; how slope, aspect, and drainages impact fire spread direction and rate; how ridges, canyons, and barriers interact with fire; and methods for determining slope in the field. The objectives are to understand topographic map features, and how topography influences fuels, fire behavior, and barriers.
S290 Unit 1
This document covers the fire environment and behavior. It discusses the three components of the fire environment triangle: fuels, weather, and topography. It also describes the three methods of heat transfer - conduction, convection, and radiation - and three methods of transporting firebrands. The relationship between flame height/length and fireline intensity is explained. Primary environmental factors affecting ignition, intensity, and rate of spread are listed. Different fire intensities are related to their environments. Standard fire behavior terminology is also introduced.
S290 Unit 0
This document provides an introduction to the S-290 Intermediate Wildland Fire Behavior course. It outlines the purpose of the course, which is to provide students with knowledge of wildland fire behavior applicable to safe and effective fire management. The objectives are to describe how fuels, weather, and topography influence fire behavior and safety, and to interpret wildland fire behavior and weather information. The document also reviews class expectations, evaluation methods, where this course fits within the fire behavior curriculum, and pre-course work.
Cabin Point Protection in Alaska
This document provides guidance on point protection strategies for structures like cabins threatened by wildfire in Alaska. It discusses developing a protection plan considering factors like time, fuels, resources. Key strategies include plumbing and defending the site with sprinklers during the fire, plumbing and leaving equipment to activate later, or conducting a burnout around the site in advance. The document provides detailed instructions on setting up sprinkler systems, installing sprinklers, positioning pumps, and other preparations to effectively protect structures from wildfire. Thorough planning, mapping, and considering logistics are emphasized.
AK Orientation part 2
The document provides guidance on firefighting strategies for tussock tundra at different relative humidity levels. It recommends direct attack using hand crews and retardant at 30% RH, with flame lengths up to 3 feet. At 20-30% RH, hand crews can work the flanks with aerial support, with potential 10 foot flame lengths at 15 mph winds. Below 20% RH, indirect tactics such as establishing control lines and burnout are recommended. It also stresses vigilance against potential spot fires and keeping an escape route available.
AK Orientation part 1
This document provides information for firefighters on fire behavior in black spruce forests in Alaska. It discusses how fire behavior changes based on relative humidity, from smoldering at 60% RH to dangerous crowning and spotting at 30% RH or lower. Specific predictions are given for rate of spread, flame lengths, and area growth at different humidity levels. Fuel models for predicting fire behavior in black spruce are also presented. The summary warns firefighters not to underestimate fires in black spruce, as conditions can change rapidly.
S215 unit 10
The document summarizes the final unit of a course. It states that the instructor will review the course material and explain the final exam process, which will be 75 multiple choice questions to be completed in 1 hour, requiring a score of 70% or higher to pass. It also notes there is an optional field exercise that reinforces key topics covered in the course through practical application.
S215 unit 9
The document discusses assessing the effectiveness of action plans and conducting after action reviews. It lists seven items that must be considered when assessing an action plan: whether the initial strategy and tactics are still valid and effective; if forecasts and predictions are still accurate; whether communication is adequate; if trigger points and management action points are still appropriate; if the plan accounts for new forecasts; and if resources need adjusting. It also indicates that action plans may need updating if the scenario changes, and that after action reviews identify lessons learned to improve future response.
S215 unit 8
This unit discusses tactical operations and resource use in the wildland-urban interface. It identifies different tactics for confronting a fire at a structure, including full or partial containment around the structure or no containment. The unit also outlines tactical uses of various resources like hand crews, aircraft, heavy equipment, and engines at interface incidents. Finally, it discusses methods for protecting structures during firing operations, such as burning out versus backfiring.
S215 unit 7
This document outlines the key points from a training unit on tactics for fighting fires in the wildland-urban interface. It discusses evaluating a structure's exterior, preparing the exterior, preparing the interior, and tasks to perform after the fire front passes. Example tasks include covering openings, clearing defensible space, and patrolling after the fire to check for hotspots. The presentation walks through a simulated wildfire scenario and how tactics may need to change based on fire growth and behavior. Maintaining vigilance even after the fire winds down is emphasized.
S215 unit 6
This document discusses structure protection tactics for wildland firefighting. It outlines seven structure protection tactical actions including defensive actions taken before, during, and after a fire front arrives, and offensive actions taken to suppress a wildfire before it reaches structures. Both static tactics like anchor and hold where resources remain in place, and dynamic tactics like bump and run where resources are mobile are described. Structure protection involves understanding when different tactics are appropriate based on current and predicted fire behavior.
S215 unit 5
The document discusses structure triage for wildland fires. It lists the four structure triage categories as defensible-prepare and hold, defensible-standalone, non-defensible-prepare and leave, and non-defensible-rescue. Firefighters must consider firefighter and public safety, fire behavior, surrounding fuels, available resources, and the structure's condition when determining the category. Conditions like over 25% roof involvement or interior room involvement may indicate a structure cannot be saved.
More from University of Alaska, Fairbanks (20)
P 101 ep 2-d
- 2. Objectives 1. Describe the principles and guidelines of a wildfire prevention sign program. 2. List the components of a sign plan. 3. Describe sign procurement procedures. 2D-02-P101-EP
- 3. Introduction Fire Prevention signing is an effective way of getting the message to the public. Fire Prevention Specialists can create a consistent, effective, and economic signing program. 2D-03-P101-EP
- 4. The Fire Prevention Signing Program 2D-04-P101-EP
- 5. Principles and Guidelines Provide basic principles, standards, and guidelines for the use, installation, and maintenance of signs and posters. 2D-05-P101-EP
- 6. Fire Prevention Sign and Poster Requirements Designed, installed, and maintained to meet the goals to effectively convey the fire prevention message 2D-06-P101-EP
- 7. Convey proper message 2D-07-P101-EP
- 8. Update signs Appropriate messages 2D-08-P101-EP
- 9. Convey clear, positive, friendly, and simple message 2D-09-P101-EP
- 10. Command attention 2D-10-P101-EP
- 11. • Visible display • Easy to read 2D-11-P101-EP
- 12. • Do not post on trees or fence posts 2D-12-P101-EP
- 13. Use proper, well maintained mounts 2D-13-P101-EP
- 14. Agency ID issues Consider interagency logo 2D-14-P101-EP
- 15. Placement 2D-15-P101-EP
- 16. Installation • Permits? • Right side of road 2D-16-P101-EP
- 17. Select Locations • Avoid dips • Place beyond crest of hill • Avoid being too close to trees 2D-17-P101-EP
- 18. The “Cone of Vision” Focal point more distant and narrower as speed increases 2D-18-P101-EP
- 19. Guidelines for installation Pg 6 in Sign Guide 2D-19-P101-EP
- 20. Avoid sign clutter 2D-20-P101-EP
- 21. Sign Mounts See page 25 in Sign Guide 2D-21-P101-EP
- 22. Sign Mounts 2D-22-P101-EP
- 23. Posters • Seasonal notices • Short lived material • Range in size from small for use on camp or recreation bulletin boards to larger 54” X 44” highway size 2D-23-P101-EP
- 24. Posters •Large •High speed 2D-24-P101-EP
- 25. Posters •Small •Slow speed 2D-25-P101-EP
- 26. Posters – Medium, low speed 2D-26-P101-EP
- 27. Maintenance 2D-27-P101-EP
- 28. The Sign Plan Most wildland agencies require field units to prepare an area sign plan. These plans give direction on all phases of the general signing program. Page 51 in Sign Guide 2D-28-P101-EP
- 29. Ordering Fire Prevention Signs/Posters • Procurement procedures • Ordering from Unicor Page 66 Sign Guide 2D-29-P101-EP
- 30. Summary and Review Lesson Objectives 1. Describe the principles and guidelines of a wildfire prevention signing program. 2. List the components of a sign plan. 3. Describe sign procurement procedures. 2D-30-P101-EP