The document describes products manufactured and supplied by Sri Shakthi Industries for power transmission lines and substations. It lists various insulator hardware fittings up to 230kV, power connectors for high voltage substations, and accessories for transmission line conductors and ground wires. The company details are also provided.
FR-4 is a woven glass fabric with epoxy resin system. It is primarily used in the printed circuit board industry. It is flame retardant, meeting UL94 flammability classification of V-0.
RG58 and LMR400 all coax cables. This article is going to talk about the detailed information about RG58 and LMR400, and interpret the differences between them.
If you want to learn more, try to follow the below link to see the article.
https://www.utmel.com/components/rg58-vs-lmr400-which-one-is-better?id=1492
RT/duroid® 6006/6010LM microwave laminates are
ceramic-PTFE composites designed for electronic
and microwave circuit applications requiring a
high dielectric constant. RT/duroid 6006 laminate
is available with a dielectric constant value of 6.15
and RT/duroid 6010LM laminate has a dielectric
constant of 10.2.
FR-4 is a woven glass fabric with epoxy resin system. It is primarily used in the printed circuit board industry. It is flame retardant, meeting UL94 flammability classification of V-0.
RG58 and LMR400 all coax cables. This article is going to talk about the detailed information about RG58 and LMR400, and interpret the differences between them.
If you want to learn more, try to follow the below link to see the article.
https://www.utmel.com/components/rg58-vs-lmr400-which-one-is-better?id=1492
RT/duroid® 6006/6010LM microwave laminates are
ceramic-PTFE composites designed for electronic
and microwave circuit applications requiring a
high dielectric constant. RT/duroid 6006 laminate
is available with a dielectric constant value of 6.15
and RT/duroid 6010LM laminate has a dielectric
constant of 10.2.
Resistance,bundled conductor,skin effect,proximity effect
Proximity effect depends on:
Frequency of the current
Conductor size
Permeability of material
Bundle conductors in transmission line chandan kumar
Bundled Conductors are used in transmission lines where the voltage exceeds 230 kV.
At such high voltages, ordinary conductors will result in excessive corona and noise which may affect communication lines.
The increased corona will result in significant power loss. Bundle conductors consist of three or four conductors for each phase.
The conductors are separated from each other by means of spacers at regular intervals. Thus, they do not touch each other.
insulators, conductors, transformer and ac motorsChippa Srikanth
it is basic to know of insulator conductor, transformer and ac motors. it is very useful to all electrical engineers. it is not only for engineers it is easily under standed by every one.
Complete details of EHV Transmission Line. Consolidated this presentation from those experts who had contributed separately on slider share and other web pages.Thanks for their valuable inputs.
This is the simple ppt explaining about the main components of the power systems. especially we are determining the insulators and its types with real time pictures which are attractive,
Resistance,bundled conductor,skin effect,proximity effect
Proximity effect depends on:
Frequency of the current
Conductor size
Permeability of material
Bundle conductors in transmission line chandan kumar
Bundled Conductors are used in transmission lines where the voltage exceeds 230 kV.
At such high voltages, ordinary conductors will result in excessive corona and noise which may affect communication lines.
The increased corona will result in significant power loss. Bundle conductors consist of three or four conductors for each phase.
The conductors are separated from each other by means of spacers at regular intervals. Thus, they do not touch each other.
insulators, conductors, transformer and ac motorsChippa Srikanth
it is basic to know of insulator conductor, transformer and ac motors. it is very useful to all electrical engineers. it is not only for engineers it is easily under standed by every one.
Complete details of EHV Transmission Line. Consolidated this presentation from those experts who had contributed separately on slider share and other web pages.Thanks for their valuable inputs.
This is the simple ppt explaining about the main components of the power systems. especially we are determining the insulators and its types with real time pictures which are attractive,
As a technique, crimping can produce long-lasting joints, efficiently and easily with very little training. Nowadays, Crimping has taken the place of soldering in many electrical applications and now is the most extensively used way for connections. When crimped properly, the strands remain individual even upon entering the insulation crimp, making the chances of strands breaking low,which ensure mechanically stability and corrosion-resistance. The proper crimping requires the contact, corresponding wire, and the most essential part--a suitable crimping tool.
IWISS with its sub-brand iCrimp offers crimping tools for virtually all types of electrical connections in the market, non-insulated, insulated, battery lug,open barrel, closed barrel, etc.
1.Made of high-quality steel, durable enough for long term service.
2.Accurate jaw design guarantees perfect crimping every time
3.Upgraded structure brings an effortless and stable operation
In the past decades, our team committed to R&D and released various new style crimping tools to make the crimping more efficiently and easily. To meet requirements in different countries, we also made the tools in both metric and imperial standards.
IWISS tools are designed to create more efficient power to make perfect crimping. We keep working to fulfill our commitment to providing every customer with high-quality tools for electrical applications.
Renewable energy will become progressively more important as time goes on. Convert light to electricity, solar power is an essential part of renewable energy supplies. In the past decades, due to the solar panel system is high performance and low-carbon,people carried extensive researches and have developed many applications on solar power, the cost of solar electricity is keeping falling. It reduces the use of fossil fuels and solves the issue of families in remote areas with stable and inexpensive electricity.The return of the photovoltaic system depends much on the number of solar connections. All solar connections must be installed properly and tightly for long-term resistance to extreme weather. To help people with the solar project, IWISS offers a wide selection of solar tools in single and in kits. Solar tool kit enables professional and efficient work with solar systems. From solar cable cutter to solar connector crimping tools,we keep our commitment to quality work. With help of tool quality and innovative design, our professional hand tools offer possibilities of workflow optimization also in the field of cable prefabrication. Gas-tight, corrosion proof and weather-resistant crimps help ensure minimal losses and good energy transmission even after years of use.
1. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
High Voltage Transmission Line Insulator Hardware’s
TRANSMISSION LINE INSULATOR HARDWARE FITTINGS UPTO 230KV
1. 230 KV Single Suspension Fittings for "Zebra" ACSR Free Centre Type with Pre-formed Armor rods.
2. 230 KV Single Tension Fittings for "Zebra" ACSR with Compression Type Dead end Assembly.
3. 230 KV Double Suspension Fittings for "Zebra" ACSR with Free Centre Type with Pre-formed Armor rods.
4. 230 KV Double Tension Fittings for "Zebra" ACSR with Compression Type Dead end Assembly.
5. 110KV Single Suspension Fittings for "Panther" ACSR with Free Centre Type.
6. 110KV Single Suspension Fittings for "Panther" ACSR with Compression Type Dead end Assembly.
7. Single Tension Fittings for Earth wire 7/3.55mm or 7/3.15mm size.
8. Single Suspension Fittings for Earth wire 7/3.55mm or 7/3.15mm.
9. 230 KV 6 Bolted Type Single Tension Fittings suitable for "Zebra" ACSR Conductor.
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries
2. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
10. 230/110 KV 4 Bolted Type Single Tension Fittings suitable for "Zebra/Panther" ACSR Conductor.
11. 230/110 KV 3 Bolted Type Single Tension Fittings suitable for "Zebra/Panther" ACSR Conductor.
12. Aluminum Earth Bond
--------------------------------------------------------------------------------------------------------------------------------------------------------------
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries
3. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
Power Connectors for High Voltage Substations
1. SWITCH END PAD CLAMPS / L CLAMPS / FLEXIBLE CLAMPS
1. Switch end pad clamp for Kundha
2. Switch end pad clamp for Panther
3. Switch end pad clamp for Mink
4. Switch end pad clamp for Zebra
5. Switch end pad clamp for 2" Bus
6. Switch end pad clamp for 3" Bus
7. Switch end pad clamp for Moose
8. Switch end pad clamp for Double Zebra
9. Switch end pad clamp for Double Kundha
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries
4. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
10. Switch end pad clamp for 25mm dia with tail
11. Switch end pad clamp for 25mm dia without tail
2. TEE CLAMPS
1. Tee clamp for Kundha to Kundha
2. Tee clamp for Zebra to Zebra
3. Tee clamp for 2" Bus to Kundha
4. Tee clamp for 2" Bus to Zebra
5. Tee clamp for 3" Bus to Kundha
6. Tee clamp for 3" Bus to Zebra
7. Tee clamp for Panther to Panther
8. Tee clamp for 25mm dia to 25mm dia
9. Tee clamp Moose to Moose
10. Tee clamp for 4" to Twin Moose
11. Tee clamp for 3" to Twin Kundha
12. Tee clamp for 3" to Twin Moose
13. Tee clamp quadruple Zebra
14. Tee clamp quadruple Zebra
3. SPACER
1. Spacer for Twin Moose
2. Spacer for Twin Zebra
3. Spacer for Twin Kundha
4. Spacer for Quadruple Moose
5. Twin spacer clamps for Kundha/Kundha
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries
5. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
6. Twin spacer clamps for Zebra/Zebra
7. Twin spacer clamps for Moose/Moose
4. CT BUSHING CLAMP
1. CT Bushing clamp conductor to Stud through Type
2. CT Bushing clamp conductor to Stud Tee Type
5. REDUCER CLAMPS
1. Reducer clamp 2" Bus to Kundha
2. Reducer clamp 3" Bus to Kundha
3. Reducer clamp 2" Bus to Zebra
4. Reducer clamp 3" Bus to Zebra
6. PARALLEL GROOVE CLAMPS
1. Parallel groove clamp for Kundha
2. Parallel groove clamp for Zebra
3. Parallel groove clamp for Moose
4. Parallel groove clamp for Leopard
5. Parallel groove clamp for Panther
6. Parallel groove clamp for Dog
7. SEATING BLOCK
1. Seating Block for 2" Bus
2. Seating Block for 3" Bus
3. Seating Block for 4" Bus
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries
6. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
8. FREE END CLAMPS
1. Free end clamp for 2" Bus
2. Free end clamp for 3" Bus
9. CORONA END CLAMPS
1. Corona end clamp for 2" Bus
2. Corona end clamp for 3" Bus
3. Corona end clamp for 4" Bus
10. BUS COUPLERS
1. Expansion bus coupler for 4" Bus
2. Rigid bus coupler for 3" to 2" Bus
3. Rigid bus coupler for 3" to 3" Bus
4. Rigid bus coupler for 2" to 2" Bus
11. WELDING SLEEVES
1. Welding sleeve for 2" IPS bus bar
2. Welding sleeve for 3" IPS bus bar
--------------------------------------------------------------------------------------------------------
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries
7. SRI SHAKTHI INDUSTRIES
Manufacturer’s of Power Connectors, Transmission Line Hardware
And Accessories
High Voltage Transmission Line and Ground Wire Accessories
TRANSMISSION LINE CONDUCTORS ACCESSORIES
1. Stock Bridge Vibration Dampers for "Zebra" ACSR
2. Stock Bridge Vibration Dampers for "Panther" ACSR
3. Mid Span Compression Joint for "Zebra" ACSR
4. Mid Span Compression Joint for "Panther" ACSR
5. Repair Sleeves for "Zebra" ACSR
6. Repair Sleeves for "Panther" ACSR
7. Pre-formed Armor Rod for "Zebra" ACSR
8. Pre-formed Armor Rod for "Panther" ACSR
9. Mid Span Compression Joint for 7/3/55 or 7/3.15mm
=========
SRI SHAKTHI INDUSTRIES PHONE & FAX: 044 2596 5263
91, G.M. PETTAI ROAD, CHENNAI – 600 0013 CELL NUMBER: +9198849 12228
srishakthindustries@gmail.com www.indiamart.com/srishakthi-industries