ST&F provides hubs for graders and hi-rail assemblies for cranes used on railroads. They also have a 6-inch bore Mazak CNC lathe for larger turning jobs in the heavy equipment industry.
It is a PPT presentation on Summer Training of 4 weaks in Diesel locomotive Works, varanasi, which contains Introduction of Diesel Locomotive Works, Varanasi and 4 shops
1. SMS (Sheet Metal Shop)
2. SAS (Sub Assembly Shop)
3. TMS (Truck Machine Shop)
4. LFS (Loco Frame Shop)
It is a Vocational Training Report (Summer Training Report) of 4 weaks in DLW, Varanasi, which consists introduction of DLW, Varanasi and 4 shops SMS (Sheet Metal Shop), SAS (Sub Assembly Shop), TMS (Truck Machine Shop) and LFS (Loco Frame Shop).
The O'Brien MET-TRACK® Workstation Crane (Workstation Bridge Crane) is a pre-engineered modular crane that allows for easy relocation and/or expansion by simply adding runway sections and/or additional bridges.
These workstation cranes are equipped with splice joints that connect the track sections and are completed with vertical and horizontal adjustment screws, facilitating precise alignment of the track sections.
Floor mounted workstation cranes are not a permanent part of your factory and therefore can easily be relocated in the future. The installation is often much simpler and does not apply stresses to the building roof structure.
Ceiling mounted workstation cranes are ideal when floor space is limited or access by other equipment is required where floor support steel would normally be needed. This option does require that the support structure is suitable for the loads imposed.
The World of Tanks Marks of Excellence can boast their battle prowess by accomplishing Marks of Excellence, a new player performance recognition system for World of Tanks on console.
It is a PPT presentation on Summer Training of 4 weaks in Diesel locomotive Works, varanasi, which contains Introduction of Diesel Locomotive Works, Varanasi and 4 shops
1. SMS (Sheet Metal Shop)
2. SAS (Sub Assembly Shop)
3. TMS (Truck Machine Shop)
4. LFS (Loco Frame Shop)
It is a Vocational Training Report (Summer Training Report) of 4 weaks in DLW, Varanasi, which consists introduction of DLW, Varanasi and 4 shops SMS (Sheet Metal Shop), SAS (Sub Assembly Shop), TMS (Truck Machine Shop) and LFS (Loco Frame Shop).
The O'Brien MET-TRACK® Workstation Crane (Workstation Bridge Crane) is a pre-engineered modular crane that allows for easy relocation and/or expansion by simply adding runway sections and/or additional bridges.
These workstation cranes are equipped with splice joints that connect the track sections and are completed with vertical and horizontal adjustment screws, facilitating precise alignment of the track sections.
Floor mounted workstation cranes are not a permanent part of your factory and therefore can easily be relocated in the future. The installation is often much simpler and does not apply stresses to the building roof structure.
Ceiling mounted workstation cranes are ideal when floor space is limited or access by other equipment is required where floor support steel would normally be needed. This option does require that the support structure is suitable for the loads imposed.
The World of Tanks Marks of Excellence can boast their battle prowess by accomplishing Marks of Excellence, a new player performance recognition system for World of Tanks on console.
This Presentation Contains Railway engineering concepts. The contents covered are Permanent way: Requirement, its component. Feel free to write in Comment Section or drop a line in my Inbox amanbathla710@gmail.com.
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaArjun Gaur
The presentation is related to my Internship at D.M.W, Patiala, one of the primate manufacturers for Indian Railways. The project assigned to me was to study the rehabilitation and remanufacturing of the Engine Block of a locomotive. Although there may be some minute loop holes in the presentation as it has been 2 years since I left that very place, but more or less everything is same. In fact, it was during my training that the Ministry of Railways decided to manufacture and roll out Multi- Genset loco called WDM 2G. So for any basic queries regarding the presentation feel free to contact.
Improving Bucketwheel Reclaimer Performance and Asset Integrity using SCADA DataMark Biggs
Discusses how SCADA data can be used to:
- Determine if machines are operating within their AS4324.1 design load envelope.
- Tracking actual fatigue cycles to the design assumptions.
- Using 3D heat maps to find patterns in overload trips and find root causes
- Increase production rates i.e. digging efficiency via changes to the stockpile shape and reducing "air digging".
Summer Training Report,DIESEL LOCOMOTIVE WORKS,VARANASI(DLW)Vivek Yadav
Summer Training Report,
Locomotive Manufacturing Workshops(EES,LTS,LFS,HMS)
DIESEL LOCOMOTIVE WORKS, VARANASI(DLW),
MECHANICAL ENGINEERING,
Diesel locomotive works (DLW) is production unit under the ministry of railways. This was set up in collaboration with American Locomotive Company (ALCO) USA in 1961 and the first locomotive was rolled out in 1964. This unit produces diesel electronic locomotives and DG sets for Indian railways and other customers in India and abroad.
This Presentation Contains Railway engineering concepts. The contents covered are Permanent way: Requirement, its component. Feel free to write in Comment Section or drop a line in my Inbox amanbathla710@gmail.com.
Presentation on Remanufacturing of Engine Block of a locomotive at DMW, PatialaArjun Gaur
The presentation is related to my Internship at D.M.W, Patiala, one of the primate manufacturers for Indian Railways. The project assigned to me was to study the rehabilitation and remanufacturing of the Engine Block of a locomotive. Although there may be some minute loop holes in the presentation as it has been 2 years since I left that very place, but more or less everything is same. In fact, it was during my training that the Ministry of Railways decided to manufacture and roll out Multi- Genset loco called WDM 2G. So for any basic queries regarding the presentation feel free to contact.
Improving Bucketwheel Reclaimer Performance and Asset Integrity using SCADA DataMark Biggs
Discusses how SCADA data can be used to:
- Determine if machines are operating within their AS4324.1 design load envelope.
- Tracking actual fatigue cycles to the design assumptions.
- Using 3D heat maps to find patterns in overload trips and find root causes
- Increase production rates i.e. digging efficiency via changes to the stockpile shape and reducing "air digging".
Summer Training Report,DIESEL LOCOMOTIVE WORKS,VARANASI(DLW)Vivek Yadav
Summer Training Report,
Locomotive Manufacturing Workshops(EES,LTS,LFS,HMS)
DIESEL LOCOMOTIVE WORKS, VARANASI(DLW),
MECHANICAL ENGINEERING,
Diesel locomotive works (DLW) is production unit under the ministry of railways. This was set up in collaboration with American Locomotive Company (ALCO) USA in 1961 and the first locomotive was rolled out in 1964. This unit produces diesel electronic locomotives and DG sets for Indian railways and other customers in India and abroad.
1. Other capabilities by ST&F for the heavy equipment industry:
Hubs for Graders
Hi-Rail assemblies for cranes used on the railroad
Our 6” Bore M5 Mazak for Larger turning jobs.