Operations guide15
•
0 likes•114 views
The document describes the typical property view for a unit operation in a process simulation software. The property view contains tabs for the design, ratings, worksheet, and dynamics of the unit operation. The design tab connects streams and specifies parameters, the ratings tab sizes vessels, the worksheet tab shows stream data, and the dynamics tab sets dynamic parameters. Though unit operations vary, these tabs provide a consistent interface to configure each one.
Report
Share
Report
Share
Download to read offline
Recommended
Operations guide13
Operations can be installed from the UnitOps view or Object Palette. They are divided into categories containing individual operations like vessels, heat transfer equipment, rotating equipment, piping equipment, solids handling, and reactors. The document provides a table listing the types of operations within each category that are available for the main flowsheet.
Operations guide10
The HYSYS interface is designed to provide access to all necessary process information through a variety of display methods, ensuring the information is consistently updated. The flexibility of HYSYS allows for third party unit operations and custom models to be linked. This section covers unit operations, templates, columns, optimization, utilities, and dynamics in both steady state and dynamic modeling, describing how information is shared between the approaches. It also includes logical operations that do not perform physical calculations but establish relationships between process elements.
Operations guide14
This document categorizes and lists different types of operations that can be used in process modeling and simulation. It includes prebuilt columns, shortcut columns, sub-flowsheets, logicals, extensions, and user-defined operations. It also provides an overview of how material and energy streams connect different unit operations and transfer process information between them.
Operations guide12
HYSYS uses the information provided about unit operations to calculate unknown parameters. It requires specific parameters based on the operation - for pumps it needs three parameters like efficiency, pressure rise, and work to define all streams. Each operation property view contains tabs with pages detailing aspects like streams, physical parameters, and dynamic ratings to fully describe the operation. Operations can be installed in flowsheets from available libraries depending on the environment in the main flowsheet, templates, or columns.
Human: Thank you, that is a good high level summary that captures the key points in 3 sentences or less as requested.
Generic slides: AMEC in the Middle East, Africa and CIS
AMEC provides engineering, project management and asset support services across the Middle East, Africa and Commonwealth of Independent States regions. It has over 2,000 employees operating in 12 countries. AMEC has a strong track record of delivering large, complex projects for national oil companies and international oil companies. Examples include acting as project management consultant for Kuwait Oil Company's $6 billion capital project portfolio and providing engineering services for BP's major Azeri oil fields development in Azerbaijan. AMEC aims to be a top three service provider in its core markets through organic growth and acquisitions.
Situacion de aprendizaje
Este documento presenta un diseño de situación de aprendizaje basado en la pedagogía crítica. Propone que los docentes creen ambientes de aprendizaje donde los estudiantes puedan construir conocimiento a través de la reflexión y resolución de problemas. Describe las fases de una posible situación de aprendizaje centrada en desarrollar la capacidad de lectura y redacción. El aprendizaje es un proceso de construcción que requiere tiempo y espacios adecuados para ser significativo.
Recommended
Operations guide13
Operations can be installed from the UnitOps view or Object Palette. They are divided into categories containing individual operations like vessels, heat transfer equipment, rotating equipment, piping equipment, solids handling, and reactors. The document provides a table listing the types of operations within each category that are available for the main flowsheet.
Operations guide10
The HYSYS interface is designed to provide access to all necessary process information through a variety of display methods, ensuring the information is consistently updated. The flexibility of HYSYS allows for third party unit operations and custom models to be linked. This section covers unit operations, templates, columns, optimization, utilities, and dynamics in both steady state and dynamic modeling, describing how information is shared between the approaches. It also includes logical operations that do not perform physical calculations but establish relationships between process elements.
Operations guide14
This document categorizes and lists different types of operations that can be used in process modeling and simulation. It includes prebuilt columns, shortcut columns, sub-flowsheets, logicals, extensions, and user-defined operations. It also provides an overview of how material and energy streams connect different unit operations and transfer process information between them.
Operations guide12
HYSYS uses the information provided about unit operations to calculate unknown parameters. It requires specific parameters based on the operation - for pumps it needs three parameters like efficiency, pressure rise, and work to define all streams. Each operation property view contains tabs with pages detailing aspects like streams, physical parameters, and dynamic ratings to fully describe the operation. Operations can be installed in flowsheets from available libraries depending on the environment in the main flowsheet, templates, or columns.
Human: Thank you, that is a good high level summary that captures the key points in 3 sentences or less as requested.
Generic slides: AMEC in the Middle East, Africa and CIS
AMEC provides engineering, project management and asset support services across the Middle East, Africa and Commonwealth of Independent States regions. It has over 2,000 employees operating in 12 countries. AMEC has a strong track record of delivering large, complex projects for national oil companies and international oil companies. Examples include acting as project management consultant for Kuwait Oil Company's $6 billion capital project portfolio and providing engineering services for BP's major Azeri oil fields development in Azerbaijan. AMEC aims to be a top three service provider in its core markets through organic growth and acquisitions.
Situacion de aprendizaje
Este documento presenta un diseño de situación de aprendizaje basado en la pedagogía crítica. Propone que los docentes creen ambientes de aprendizaje donde los estudiantes puedan construir conocimiento a través de la reflexión y resolución de problemas. Describe las fases de una posible situación de aprendizaje centrada en desarrollar la capacidad de lectura y redacción. El aprendizaje es un proceso de construcción que requiere tiempo y espacios adecuados para ser significativo.
Wag the dog 1
La película Wag the Dog trata sobre un presidente de Estados Unidos que comete un grave error antes de las elecciones. Su equipo de campaña contrata a un productor de cine para crear una gran farsa que engaña al público y eleva la popularidad del presidente. Los medios de comunicación ayudan a distribuir esta falsa información sin verificar los hechos, afectando negativamente a la sociedad estadounidense y mostrando cómo los gobiernos pueden manipular a la gente a través de los medios.
Energia sustentável
La energía sustentable es un tema importante para el futuro de nuestro planeta. Provee alternativas renovables a los combustibles fósiles que contaminan el medio ambiente. Estas opciones como la energía solar, eólica e hidráulica son más limpias y ayudarán a preservar los recursos naturales para las generaciones futuras.
Sthephaniacuadro de texto
La interfaz de usuario de una aplicación de presentaciones incluye una barra de título, una barra de menú y botones para cambiar entre vistas de diapositivas, notas y zoom.
Lidia rosa
Este documento clasifica diferentes tipos de redes según su tecnología de transmisión y escala. Describe redes broadcast, point-to-point, LAN, MAN, WAN, redes inalámbricas, Internet, intranet y extranet. Además, distingue entre redes de comunicación, redes conmutadas y redes de difusión.
Shank worksheet
Giroux argues that media representations of youth reflect adults' concerns rather than youth identity, and do not necessarily reflect reality. Acland argues that media representations of delinquent youth reinforce societal norms by depicting unacceptable "deviant" youth behavior, allowing for increased state control over youth through actions like ASBOs. Hebdige examines subcultures as groups that feel neglected by societal standards and develop their own identity in opposition to mainstream values. The document discusses applying these theoretical lenses to representations of youth in different texts.
MAH i3 2012-Destination Tulsa-spreads
1. Tulsa, Oklahoma will host the U.S. Nationals for Arabian horses for the next five years and offers attractions for visitors to explore between competitions, including museums, parks, restaurants, and shopping.
2. The article recommends several dining options near the competition venue ranging from steakhouses to Thai and barbecue, as well as farmers markets to shop.
3. In addition to eating and shopping, the article suggests family-friendly activities like the zoo and museums, along with architectural tours and parks for walking dogs or enjoying the scenery.
Teoria conductual
La anorexia y la bulimia son trastornos alimenticios graves que afectan principalmente a las mujeres. La anorexia implica dejar de comer y hacer ejercicio excesivo, mientras que la bulimia se caracteriza por atracones de comida seguidos de vómitos. Ambas condiciones suelen desarrollarse como resultado de problemas familiares o escolares previos y tienen repercusiones psicológicas como la ansiedad y la baja autoestima, así como biológicas como la pérdida de peso y los cambios menstruales. Est
Simulation for Automation of Manufacturing, Filling And Capping The Bottles
ABSTRACT: The industries require large amount of labour to increase the production rate. The low cost industrial automation process is best suitable for small scale industries to increase the production rate of bottle manufacturing, filling with liquid and capping the bottles. In the present work the electric circuits for the above process have been designed and simulated. The sequence of operations are such as automatic clamping, unclamping, injecting the molten material, filling and capping process of the bottles, which is achieved through the use of simple devices like limit switches, relays, electrical controls, pneumatic actuators and sensors. The sequence of operation is tested and simulated by using Fluidsim Pneumatic simulation software.
Dimensional modelingowb11gr2 paper
This document describes the dimensional modeling features in Oracle Warehouse Builder 11gR2. It discusses how OWB allows users to efficiently model dimensions and cubes using wizards. It also covers how the dimension and cube operators can be used to implement loading processes with functionality for slowly changing dimensions, orphan management, and materialized view creation. However, the document notes that automatic binding of dimensions may overwrite manual changes and that some default settings, like temporary tables, cannot be disabled.
Atmospheric crude tower simulation
The document describes setting up and simulating an atmospheric crude distillation column in HYSYS. It involves characterizing the crude oil feed using assay data, installing a pre-fractionation train with a separator, heater and mixer to determine the feed to the column, and then installing the column along with defining steam and energy streams. The column is configured as a 29 stage ideal column with overhead, bottoms and side product draws using a built-in 3 stripper crude column template.
Workflow Manager
The document discusses how to use the Workflow Manager in an asset management system to configure automated responses, or "workflows", to events. It describes how to add, configure, edit, and delete workflows by setting rules with conditions and actions. Configuring a workflow involves choosing an event, adding conditions that must be met, and actions the system will perform in response.
Fluid power graphic symbols
This document provides standards for fluid power graphic symbols used in circuit diagrams for fluid power systems. It discusses the types of symbols commonly used, including pictorial, cutaway, and graphic symbols. Graphic symbols are preferred as they emphasize component function, are simple to draw, and can promote universal understanding. The document then describes rules for the symbols, including how to represent lines, basic shapes, flow direction, reservoirs, accumulators, filters, cylinders, actuators and more. It provides the specific graphic symbol for numerous fluid power components. The purpose is to standardize symbols to simplify the design, analysis and understanding of fluid power circuits.
Hyundai hb100 backhoe loader service repair manual
This document contains sections on safety, specifications, operational checks, engine systems, power train systems, brake systems, steering systems, work equipment, electrical systems, and troubleshooting guides for various components. It provides information on component locations, electrical circuits, monitoring systems, switch specifications, and testing and adjustment procedures. The sections cover the structure and function of components, operational checks and troubleshooting, tests and adjustments, and disassembly and reassembly instructions.
Flare System Process Design Manual - Flour Daniel
This document provides a revision list and table of contents for a flare system process design manual. The revision list summarizes changes made between the first and revised editions, including updates to several sections and appendices. The table of contents outlines the topics and subsections covered in the manual, such as design pressure and temperature selection, relieving devices, relief load calculation, and flare stack design.
UML 2.0 Changes
The document discusses changes between UML 1.x and UML 2.0. It provides an overview of UML 2.0 including new diagram types like timing diagrams and changes to existing diagrams. Key changes noted are increased precision, modularity, and rationalization through removing redundant concepts. The document then covers specific diagram updates, including activity diagrams now able to model workflow and state machines able to model object state. Advanced class diagram relationships and interfaces are also reviewed.
Use of Flow Simulation in designing a Suction Pump
Virtually test your product resulting in one final prototype with SolidWorks Flow Simulation..
Hyundai 33 df forklift truck service repair manual
The document describes the power train system of a vehicle. It includes the engine, transmission, drive shaft, drive axle, and brakes. The transmission uses a torque converter and power shift transmission to transfer power from the engine to the drive axle. It includes a control valve that regulates oil pressure and directs it to engage either the forward or reverse clutch, allowing the vehicle to shift gears automatically based on engine speed. The transmission case houses the transmission components and control valve, and includes an oil filter and parking brake.
More Related Content
Viewers also liked
Wag the dog 1
La película Wag the Dog trata sobre un presidente de Estados Unidos que comete un grave error antes de las elecciones. Su equipo de campaña contrata a un productor de cine para crear una gran farsa que engaña al público y eleva la popularidad del presidente. Los medios de comunicación ayudan a distribuir esta falsa información sin verificar los hechos, afectando negativamente a la sociedad estadounidense y mostrando cómo los gobiernos pueden manipular a la gente a través de los medios.
Energia sustentável
La energía sustentable es un tema importante para el futuro de nuestro planeta. Provee alternativas renovables a los combustibles fósiles que contaminan el medio ambiente. Estas opciones como la energía solar, eólica e hidráulica son más limpias y ayudarán a preservar los recursos naturales para las generaciones futuras.
Sthephaniacuadro de texto
La interfaz de usuario de una aplicación de presentaciones incluye una barra de título, una barra de menú y botones para cambiar entre vistas de diapositivas, notas y zoom.
Lidia rosa
Este documento clasifica diferentes tipos de redes según su tecnología de transmisión y escala. Describe redes broadcast, point-to-point, LAN, MAN, WAN, redes inalámbricas, Internet, intranet y extranet. Además, distingue entre redes de comunicación, redes conmutadas y redes de difusión.
Shank worksheet
Giroux argues that media representations of youth reflect adults' concerns rather than youth identity, and do not necessarily reflect reality. Acland argues that media representations of delinquent youth reinforce societal norms by depicting unacceptable "deviant" youth behavior, allowing for increased state control over youth through actions like ASBOs. Hebdige examines subcultures as groups that feel neglected by societal standards and develop their own identity in opposition to mainstream values. The document discusses applying these theoretical lenses to representations of youth in different texts.
MAH i3 2012-Destination Tulsa-spreads
1. Tulsa, Oklahoma will host the U.S. Nationals for Arabian horses for the next five years and offers attractions for visitors to explore between competitions, including museums, parks, restaurants, and shopping.
2. The article recommends several dining options near the competition venue ranging from steakhouses to Thai and barbecue, as well as farmers markets to shop.
3. In addition to eating and shopping, the article suggests family-friendly activities like the zoo and museums, along with architectural tours and parks for walking dogs or enjoying the scenery.
Teoria conductual
La anorexia y la bulimia son trastornos alimenticios graves que afectan principalmente a las mujeres. La anorexia implica dejar de comer y hacer ejercicio excesivo, mientras que la bulimia se caracteriza por atracones de comida seguidos de vómitos. Ambas condiciones suelen desarrollarse como resultado de problemas familiares o escolares previos y tienen repercusiones psicológicas como la ansiedad y la baja autoestima, así como biológicas como la pérdida de peso y los cambios menstruales. Est
Viewers also liked (12)
Similar to Operations guide15
Simulation for Automation of Manufacturing, Filling And Capping The Bottles
ABSTRACT: The industries require large amount of labour to increase the production rate. The low cost industrial automation process is best suitable for small scale industries to increase the production rate of bottle manufacturing, filling with liquid and capping the bottles. In the present work the electric circuits for the above process have been designed and simulated. The sequence of operations are such as automatic clamping, unclamping, injecting the molten material, filling and capping process of the bottles, which is achieved through the use of simple devices like limit switches, relays, electrical controls, pneumatic actuators and sensors. The sequence of operation is tested and simulated by using Fluidsim Pneumatic simulation software.
Dimensional modelingowb11gr2 paper
This document describes the dimensional modeling features in Oracle Warehouse Builder 11gR2. It discusses how OWB allows users to efficiently model dimensions and cubes using wizards. It also covers how the dimension and cube operators can be used to implement loading processes with functionality for slowly changing dimensions, orphan management, and materialized view creation. However, the document notes that automatic binding of dimensions may overwrite manual changes and that some default settings, like temporary tables, cannot be disabled.
Atmospheric crude tower simulation
The document describes setting up and simulating an atmospheric crude distillation column in HYSYS. It involves characterizing the crude oil feed using assay data, installing a pre-fractionation train with a separator, heater and mixer to determine the feed to the column, and then installing the column along with defining steam and energy streams. The column is configured as a 29 stage ideal column with overhead, bottoms and side product draws using a built-in 3 stripper crude column template.
Workflow Manager
The document discusses how to use the Workflow Manager in an asset management system to configure automated responses, or "workflows", to events. It describes how to add, configure, edit, and delete workflows by setting rules with conditions and actions. Configuring a workflow involves choosing an event, adding conditions that must be met, and actions the system will perform in response.
Fluid power graphic symbols
This document provides standards for fluid power graphic symbols used in circuit diagrams for fluid power systems. It discusses the types of symbols commonly used, including pictorial, cutaway, and graphic symbols. Graphic symbols are preferred as they emphasize component function, are simple to draw, and can promote universal understanding. The document then describes rules for the symbols, including how to represent lines, basic shapes, flow direction, reservoirs, accumulators, filters, cylinders, actuators and more. It provides the specific graphic symbol for numerous fluid power components. The purpose is to standardize symbols to simplify the design, analysis and understanding of fluid power circuits.
Hyundai hb100 backhoe loader service repair manual
This document contains sections on safety, specifications, operational checks, engine systems, power train systems, brake systems, steering systems, work equipment, electrical systems, and troubleshooting guides for various components. It provides information on component locations, electrical circuits, monitoring systems, switch specifications, and testing and adjustment procedures. The sections cover the structure and function of components, operational checks and troubleshooting, tests and adjustments, and disassembly and reassembly instructions.
Flare System Process Design Manual - Flour Daniel
This document provides a revision list and table of contents for a flare system process design manual. The revision list summarizes changes made between the first and revised editions, including updates to several sections and appendices. The table of contents outlines the topics and subsections covered in the manual, such as design pressure and temperature selection, relieving devices, relief load calculation, and flare stack design.
UML 2.0 Changes
The document discusses changes between UML 1.x and UML 2.0. It provides an overview of UML 2.0 including new diagram types like timing diagrams and changes to existing diagrams. Key changes noted are increased precision, modularity, and rationalization through removing redundant concepts. The document then covers specific diagram updates, including activity diagrams now able to model workflow and state machines able to model object state. Advanced class diagram relationships and interfaces are also reviewed.
Use of Flow Simulation in designing a Suction Pump
Virtually test your product resulting in one final prototype with SolidWorks Flow Simulation..
Hyundai 33 df forklift truck service repair manual
The document describes the power train system of a vehicle. It includes the engine, transmission, drive shaft, drive axle, and brakes. The transmission uses a torque converter and power shift transmission to transfer power from the engine to the drive axle. It includes a control valve that regulates oil pressure and directs it to engage either the forward or reverse clutch, allowing the vehicle to shift gears automatically based on engine speed. The transmission case houses the transmission components and control valve, and includes an oil filter and parking brake.
Hyundai 25 df forklift truck service repair manual
The document describes the power train system of a vehicle. It includes the engine, transmission, drive shaft, drive axle, and brakes. The transmission uses a torque converter and power shift transmission to transfer power from the engine to the drive axle. It includes a control valve that regulates oil pressure and directs it to engage either the forward or reverse clutch, allowing the vehicle to shift gears automatically based on engine speed. The transmission case houses the transmission components and control valve, and includes an oil filter and parking brake.
Hyundai 20 df forklift truck service repair manual
The document describes the power train system of a vehicle. It includes the engine, transmission, drive shaft, drive axle, and brakes. The transmission uses a torque converter and power shift transmission to transfer power from the engine to the drive axle. It includes a control valve that regulates oil pressure and directs it to engage either the forward or reverse clutch, allowing the vehicle to shift gears automatically based on engine speed. The transmission case houses the transmission components and control valve, and includes an oil filter and parking brake.
Hyundai 30 df forklift truck service repair manual
The document describes the power train system of a vehicle. It includes the engine, transmission, drive shaft, drive axle, and brakes. The transmission uses a torque converter and power shift transmission to transfer power from the engine to the drive axle. It includes a control valve that regulates oil pressure and directs it to engage either the forward or reverse clutch, allowing the vehicle to shift gears automatically based on engine speed. The transmission case houses the transmission components and control valve, and includes an oil filter and parking brake.
General motors hydra-matic 4 l60e [2003 ð¦.rus]
This document provides information about the Hydra-matic 4L60-E transmission. It contains sections on the transmission's major mechanical components, principles of operation, power flow through each gear range, complete hydraulic circuits, lubrication points, part locations, and specifications. Detailed cutaway views and diagrams are provided to illustrate the mechanical and hydraulic functions and interactions of the transmission components.
Hyundai 30 d 7e forklift truck service repair manual
This document provides instructions for disassembling and assembling a steering unit. The main steps for disassembly are: removing the end cover and gearwheel set; taking out O-rings and cardan shaft; removing the distributor plate and check valve parts; pressing out the spool, sleeve, bearing races and thrust bearing; and disassembling the pressure relief valve. The main steps for assembly are: assembling the spool and sleeve with neutral position springs; fitting bearing races and thrust bearing; installing O-rings using an assembly tool; and installing the lip seal using an assembly tool. Proper lubrication and alignment of parts is important for correct assembly.
Hyundai 25 d 7e forklift truck service repair manual
This document provides instructions for disassembling and assembling a steering unit. The main steps for disassembly are: removing the end cover and gearwheel set; taking out O-rings and cardan shaft; removing the distributor plate and check valve parts; pressing out the spool, sleeve, bearing races and thrust bearing; and disassembling the pressure relief valve. The main steps for assembly are: assembling the spool and sleeve with neutral position springs; fitting bearing races and thrust bearing; installing O-rings using an assembly tool; and installing the lip seal using an assembly tool. Proper lubrication and alignment of parts is important for correct assembly.
Hyundai 33 d 7e forklift truck service repair manual
This document provides instructions for disassembling and assembling a steering system. It describes the tools needed and lists the tightening torques for reassembly. The steering unit structure is shown in detail with labeled parts. Procedures are provided for disassembling the steering column from the steering unit and for removing individual parts of the steering unit.
Hyundai 20 d 7e forklift truck service repair manual
This document provides instructions for disassembling and assembling a steering unit. The main steps for disassembly are: removing the end cover and gearwheel set; taking out O-rings and cardan shaft; removing the distributor plate and check valve parts; pressing out the spool, sleeve, bearing races and thrust bearing; and disassembling the pressure relief valve. The main steps for assembly are: assembling the spool and sleeve with neutral position springs; fitting bearing races and thrust bearing; installing O-rings using an assembly tool; and installing the lip seal using an assembly tool. Proper lubrication and alignment of parts is important for correct assembly.
Enerit ISO 50001 Administration Guide
This document provides guidance on administering locations, sub-locations, users, and settings in the Enerit ISO 50001 Energy Manager Pro software. It outlines how to create new locations and enter key details like objectives, targets, and default chart configurations. Sub-locations represent areas within a location, like buildings. Users can be assigned access to specific locations. System settings cover general configuration options.
Similar to Operations guide15 (19)
Simulation for Automation of Manufacturing, Filling And Capping The Bottles
Simulation for Automation of Manufacturing, Filling And Capping The Bottles
Hyundai hb100 backhoe loader service repair manual
Hyundai hb100 backhoe loader service repair manual
Use of Flow Simulation in designing a Suction Pump
Use of Flow Simulation in designing a Suction Pump
Hyundai 33 df forklift truck service repair manual
Hyundai 33 df forklift truck service repair manual
Hyundai 25 df forklift truck service repair manual
Hyundai 25 df forklift truck service repair manual
Hyundai 20 df forklift truck service repair manual
Hyundai 20 df forklift truck service repair manual
Hyundai 30 df forklift truck service repair manual
Hyundai 30 df forklift truck service repair manual
Hyundai 30 d 7e forklift truck service repair manual
Hyundai 30 d 7e forklift truck service repair manual
Hyundai 25 d 7e forklift truck service repair manual
Hyundai 25 d 7e forklift truck service repair manual
Hyundai 33 d 7e forklift truck service repair manual
Hyundai 33 d 7e forklift truck service repair manual
Hyundai 20 d 7e forklift truck service repair manual
Hyundai 20 d 7e forklift truck service repair manual
More from Vcoi Vit
More from Vcoi Vit (20)
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri31
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri31
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri14
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri14
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri13
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri13
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri05
2eae0e86 e7c6-431d-aa08-b8f89ba71921 giaotrinhkinhtechinhtri05
Operations guide15
- 1. Operations Overview 1-9 1-9 1.2.2 Unit Operation Property View Although each Unit Operation differs in functionality and operation, in general, the Unit Operation property view remains fairly consistent in its overall appearance. The figure below shows a generic property view for a Unit Operation. Figure 1.1 The Operation property view can contain several different tabs which are operation specific, however the Design, Ratings, Worksheet, and Dynamics tabs can usually be found in each Unit Operation property view and have fairly similar functionality. Tab Description Design Connects the feed and product streams to the Unit Operation. Other parameters such as pressure drop, heat flow, and solving method are also specified on the various pages of this tab. Ratings Rates and Sizes the Unit Operation vessel. Specification of the tab is not always necessary in Steady State mode, however it can be used to calculate vessel hold up. Worksheet Displays the Conditions, Properties, Composition, and Pressure Flow values of the streams entering and exiting the Unit Operation. Refer to Section 1.2.3 - Worksheet Tab for more information. Dynamics Sets the dynamic parameters associated with the Unit Operation such as valve sizing and pressure flow relations. Not relevant to steady state modeling. For information on dynamic modeling implications of this tab, refer to the Dynamic Modeling manual. The Name of the Unit Operation. The various pages of the active tab. The active tab of the property view. Deletes the Unit Operation from the flowsheet. Displays the calculation status of the Unit Operation. It may also display what specifications are required. Ignores the Unit Operation.