The document outlines the progress of various engineering tasks, detailing completed and ongoing processes for several components, including materials used and specific fabrication methods. It also lists upcoming tasks with target completion dates and describes cost-saving measures intended to improve efficiency. The tasks encompass a range of materials and processes, all aimed at optimizing the engineering workflow.

1. OPERATION MEETING NPI
WW1122
ENGINEERING TEAM
AMMAR & MARAN

2. CONTENTS
1. TASK SUMMARY (PASS & CURRENT)
2. TASK (PLAN FOR NEXT)
3. COST SAVING

3. TASK TASK DESCRIPTION(ASM PROJEK)
STATUS
( DONE/ IN-PROGRESS)
1
RF BAR/BRANCH(1024-401-1)- PROCESS DRAWING
-JOB ROUTER DONE
2
BRKT-SP HEATER(1016-463-1)- PROCESS DRAWING
-JOB ROUTER
DONE
3
SENSOR JOB/SUS(1015-947-1)- PROCESS DRAWING
-JOB ROUTER DONE
4
RF BAR /LOWER RC(1016-233-1)- PROCESS DRAWING
-JOB ROUTER
DONE
5
FIXER(1032-471-1)- PROCESS DRAWING
-JOB ROUTER DONE
TASK SUMMARY (PASS & CURRENT)

4. TASK DESCRIPTION ELABORATION
RF BAR/BRANCH(1024-401-1)
MATERIAL: A5052 4MM
PROCESS
1.LASERCUT
2.BUFFING
3.IPQA BUYOFF
4. MACHINING COUNTERSUNK
5.IPQA BUYOFF
6. BENDING
7.IPQA BUYOFF
8. IQA BUYOFF
9.FINISHING:CHROMATE
10. IQA BUYOFF
11. WIP STORE
PICTURE (If Available)
TASK 1

5. TASK DESCRIPTION ELABORATION
BRKT-SP HEATER(1016-463-1)
MATERIAL: SUS304 1MM
PROCESS
1.LASERCUT
2.BUFFING
3.IPQA BUYOFF
4. BENDING
5.IPQA BUYOFF
6.IQA BUYOFF
7. FINISHING: PICKLING AND
PASSIVATE
8.IQA BUYOFF
9. WIP STORE
PICTURE (If Available)
TASK 2

6. TASK DESCRIPTION ELABORATION
SENSOR JOB/SUS(1015-947-1)
MATERIAL: SUS304 1.5MM
PROCESS
1.LASERCUT
2.BUFFING
3.IPQA BUYOFF
4. BENDING
5.IPQA BUYOFF
6.IQA BUYOFF
7. FINISHING: PICKLING AND
PASSIVATE
8.IQA BUYOFF
9. WIP STORE
PICTURE (If Available)
TASK 3

7. TASK DESCRIPTION ELABORATION
RF BAR /LOWER RC(1016-233-1)
MATERIAL: A5052 4.0MM
PROCESS
1.LASERCUT
2.BUFFING
3.IPQA BUYOFF
4.IQA BUYOFF
5.FINISHING:CHROMATE
6. IQA BUYOFF
7. WIP STORE
PICTURE (If Available)
TASK 4

8. TASK DESCRIPTION ELABORATION
FIXER(1032-471-1)
MATERIAL: SUS304 5MM, 10.0MM
PROCESS PART 1
1.LASERCUT
2.BUFFING
3.IPQA BUYOFF
4.BENDING
5. IPQA BUYOFF
6. WIP STORE
PROCESS PART 2
1.LASERCUT
2.BUFFING
3.IPQA BUYOFF
4. WIP STORE
ASSEMBLY
1.WELDING
2.BUFFING
3.IPQA BUYOFF
4.IQA BUYOFF
5. FINISHING: PICKLING AND PASSIVATE
6.IQA BUYOFF
PICTURE (If Available)
TASK 5

9. TASK TASK DISCRIPTION
TARGET DATE TO
COMPLETE
1
BENCHMARK
CARD CLAMP(EMP4260A80H03L-LF)- PROCESS DRAWING
-JOB ROUTER
23/3/2022
2
ASM
COVER-DUCT-A(1024-666-01)-PROCESS DRAWING
-JOB ROUTER
22/3/2022
3
ASM
STOPPER-DOOR(1036-074-01)-PROCESS DRAWING
-JOB ROUTER
24/3/2022
4
ASM
COVER-/RF-R(1023-557-01)-PROCESS DRAWING
-JOB ROUTER
25/3/2022
ASM
COVER-/RF-L(1023-558-01)-PROCESS DRAWING 26/3/2022
TASK (PLAN FOR NEXT)

10. COST SAVING
SLOT TAB
Tab and slot
- Reduce cost for fabricate jig to positioning
and clamp the part
- Reduce cycle time