The document provides product information and specifications for various public utility shelters and accessories. It includes details on trolley shelters, smoking shelters, cycle shelters, bollards, balustrades, and other site protection and enclosure products. Materials typically include stainless steel, timber, and other durable, eco-friendly materials. Dimensions, load ratings, and finishes are specified for a range of standard and customizable options.

1. Public utilities

2. Trolley Shelters
• NTP - 3000 Single
• NTP - 3000S Double

3. NTP - 2300R Single
NTP - 2301R Double

4. Trolley Shelter
NTP – 2000 Single

5. Trolley Shelter – Eco – Friendly Timber
NTP - 9000 Single

6. Trolley Shelter Eco – Friendly Timber
NTP – 9001 Single

7. Trolley Shelter
NSTP – 4800
Bulk Storage Unit
Side Entry
Capacity 144 Trolleys

8. Trolley Shelter
NSTP – 8400
End Entry

9. SMOKING SHELTERS TO MEET
LEGISLATION
OPTIONS:
•SMOKING BINS
•SEATS
•SHELVES

10. • Grade 304 Stainless Steel as Standard
• Grade 316 for Coastal regions
• Stainless Steel to be polished 240 grit finish
• Width 1200mm, 1580mm 2000mm
• Height 80mm
• Tube Diameter optional:
60.3 Dia x 2.6mm
50.8 Dia x 2.0mm
• Important Note: The radius of the loops are
to safety standard, eliminating personal injury

11. DESIGNED STANDARD
STAINLESS TROLLEY
LOOP PARK

13. 1581 Stainless steel loop with bump rail
Designed to reduce damage to Trolleys
and reduce repair costs
Fitted at the end of each Trolley corral

15. NUTEK BUS SHELTERS
FROM OUR STANDARD RANGE

17. COVERED / ENCLOSED
WALKWAYS
STANDARD OR BESPOKE

18. COVERED WALKWAYS
SHOWING SIDE INFILL PANELS

19. CYCLE SHELTERS FOR ALL APPLICATIONS

21. MANUFACTURED BOLLARDS
FOR INTERNAL
AND
EXTERNAL PROTECTION

22. NNNN
NNNN
NNNN
NNNN
NNNN
NNNN
NN

23. • Designed to withstand impact from
vehicles
• To protect plant materials, roller
shutter doors, vulnerable corners of
buildings
• Galvanised steel prevents rusting
• Surface mounted bollards 200mm
high, 219mm diameter and 9.5mm
wall thickness
• Fixed using 4 x M16 x 150mm studs
and chemical resin anchors
• Canopy protection bollards

24. COLUMN
PROTECTION

25. COLUMN PROTECTION
• Grade 304 stainless steel, grade 316
Used in exterior use in coastal regions
• Stainless satin polish 240 grit finish
• 38mm minimum tube in two halves
• No protruding brackets above or below

26. • Grade 304 Stainless Steel
• Grade 316 for coastal regions, exterior use
• Stainless Steel, satin polish 240 grit finish
• 38mm tube in two halves with two fixing points
• Installed @ 750mm FFL to top of tube.
• Note: the radius of the fixing plates,
manufactured by Nutek in house

27. COLUMN
PROTECTION
DESIGNED TO BE
SAFE…
NO SHARP
EDGES!

28. • EXTERNAL & INTERNAL KEE KLAMP
• TO PROTECT PLANT, MATERIAL IN BACK OF HOUSE
• AREAS AND EXTERNAL YARDS.
• CAN BE ALSO BE USED FOR SLOPES AND CHANGE IN
FLOOR LEVELS

30. WAREHOUSE PROTECTION RAIL
• MILD STEEL
• GALVANISED
• 60MM X 40MM
• BOX SECTION
• VERY DURABLE

32. • STAINLESS STEEL LOW
LEVEL PROTECTION
• 2” (50MM) DIAMETER
• POTTED OR SURFACE -
MOUNTED

33. • CANOPY
• POST PROTECTION
• TROLLEY LOOPS
• ALL DESIGNED
• MANUFACTURED
• SUPPLIED
• INSTALLED BY NUTEK

34. NUTEK DESIGNS, MANUFACTURES
AND
INSTALLS NEW PRODUCTS FOR
RETAIL
ABOVE: CAGE MARSHALLING
BELOW LEFT: ENTRANCE LOBBY

35. STAINLESS STEEL
WINDBREAK AND
ANTI-RAM BOLLARDS

36. HOME DELIVERY CANOPIES
TO MEET ALL STANDARDS

37. • 100% PVC FREE
• OR RECYCLED MATERIAL
• BASE TRIM AND VERTICAL CORNER GUARDS
• RIDGID OR FLEXIBLE
• STAINLESS CORNER GUARDS

38. • HALF ROUND CORNER GUARD
• STAINLESS STEEL, BRUSHED
• 100% RECYCLABLE
• DOES NOT WEAR OR AGE
• LOWER CARBON FOOTPRINT-
THAN METAL AND INJECTION
MOULDED VERSIONS

40. The Boston Bumper® Series
Series 2000
Series 3300

41. • THE CORE IS MADE COMPLETELY
FROM RECYCLED MATERIAL.

42. Installation Instructions
Easy as 1-2-3
1. Attach the base and end/corner cap to the
desired surface by inserting #8 panhead screws
through the pre-slotted holes in both the end cap
and the base. Insert screws through the two
holes of end cap and tighten.
2a. Flexible Top: Butt end of the vinyl top against
end/corner cap face. While applying pressure, bend
back (banana peel) vinyl top so that vinyl legs are
positioned within the base grooves. Roll vinyl top over
full length of base, then tap with rubber mallet to
ensure vinyl is securely locked into the base.
2b. Rigid Top: Snap the Rigid Top over the Rigid
Base.
3. If necessary wipe clean with any household
cleaning product.

45. BALUSTRADE
• 1.5kN LOAD RATING FOR RETAIL ENVIRONMENT
• 48.3MM DIAMETER STAINLESS STEEL UPRIGHTS
• CAST STAINLESS STEEL FOOTPLATES WITH COVER PLATES
• 42.4MM DIAMETER STAINLESS STEEL HANDRAIL
10MMTHICK CLEAR GLASS
• 1100MM NOMINAL HEIGHT ON LEVEL AREAS
• ALL ABOVE ARE MINIMUM SPECIFICATIONS
Option
• 3.0kN LOAD RATING DESIGN AVAILABLE UPON REQUEST

46. • 1.5kN LOAD RATING FOR RETAIL ENVIRONMENT
• 48.3MM DIAMETER STAINLESS STEEL UPRIGHTS
• CAST STAINLESS STEEL FOOTPLATES WITH COVER PLATES
• 42.4MM DIAMETER STAINLESS STEEL HANDRAIL AT 10MM THICK
CLEAR GLASS
• 1100MM NOMINAL HEIGHT ON LEVEL AREAS
• 950MM NOMINAL HEIGHT ON RAKED AREA`S
ALL ABOVE ARE MINIMUM SPECIFACATIONS
Option
• 3.0kN LOAD RATING DESIGN AVAILABLE UPON REQUEST