The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information.
Nissan forklift p frame - ps series service repair manualudfjjsjekkemm
This service manual provides information for servicing ATLET stackers. It describes the general scope and content of the manual, how to use it, important safety instructions, and provides technical data and specifications for the trucks. The manual is divided into tabs covering different truck systems and components. Safety is emphasized, including warnings about working on energized systems, blocking the mast and forks before service, and emergency release of hydraulic pressure.
Nissan forklift p frame - psd series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions for working on the vehicles, including ensuring the drive wheel is lifted and mast is locked before working. It outlines the structure of the manual, with sections covering specific subsystems, and technical data on the truck models. Recommended lubricants and consumables are listed.
Nissan forklift electric p01 series service repair manualfusjjefjkskemem
This document provides an introduction and overview of a service manual for Nissan forklifts models P01 and P02. It includes sections on how to use the manual, identification information, general precautions for maintenance and repair, and specifications for tightening standard bolts. The manual consists of 14 sections covering various systems of the forklift and how to service parts. Technical bulletins may be included with the manual to provide updates.
Nissan forklift o frame -opc series service repair manualfujsjefjkskekfm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift p frame - ps series service repair manualfjskekkwersmem
The document is a service manual for ATLET stackers and provides information about:
1) Safety instructions for working on the trucks, including lifting points and procedures.
2) Technical data and specifications for truck components like the traction motor, gearbox, hydraulic system and control system.
3) Recommended oils, greases and other incidental materials for maintenance and service.
Nissan forklift p frame - psh series service repair manualudfjjsjekkemm
This service manual provides information for servicing ATLET stackers. It describes the structure and contents of the manual, safety instructions that must be followed when working on the trucks, and provides general technical data and component specifications. Technicians should follow the safety protocols, such as removing the battery plug and using lifting points and locks, to prevent injury when servicing the trucks. The manual is divided into tabs covering the different mechanical systems to allow technicians to easily find relevant information.
Nissan forklift p frame - psh series service repair manualdufjdjskkemm
This service manual provides information for servicing ATLET stackers. It describes the general scope and content of the manual, how to use it, important safety instructions, and provides technical data and specifications for the trucks. Key points covered include:
- The manual covers ATLET's PS and PSH stacker models.
- It is organized by subsystem with tabs for things like masts, hydraulics, and electrical systems.
- Safety is paramount when working on trucks and precautions like disabling power, locking out masts, and clearing work areas must be followed.
- Technical data and specifications for truck components are provided for reference during service.
Nissan forklift p frame - ps series service repair manualufsikkdjskemds
This service manual provides information for servicing ATLET stackers. It describes the structure and contents of the manual, safety instructions that must be followed when working on the trucks, and provides general technical data and component specifications. Technicians should follow the safety guidelines, which include removing the battery plug before working on electrical or hydraulic systems, locking the mast during work, and not having other people near the truck during testing. The manual is intended to help technicians efficiently and safely service the trucks.
Nissan forklift p frame - ps series service repair manualudfjjsjekkemm
This service manual provides information for servicing ATLET stackers. It describes the general scope and content of the manual, how to use it, important safety instructions, and provides technical data and specifications for the trucks. The manual is divided into tabs covering different truck systems and components. Safety is emphasized, including warnings about working on energized systems, blocking the mast and forks before service, and emergency release of hydraulic pressure.
Nissan forklift p frame - psd series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions for working on the vehicles, including ensuring the drive wheel is lifted and mast is locked before working. It outlines the structure of the manual, with sections covering specific subsystems, and technical data on the truck models. Recommended lubricants and consumables are listed.
Nissan forklift electric p01 series service repair manualfusjjefjkskemem
This document provides an introduction and overview of a service manual for Nissan forklifts models P01 and P02. It includes sections on how to use the manual, identification information, general precautions for maintenance and repair, and specifications for tightening standard bolts. The manual consists of 14 sections covering various systems of the forklift and how to service parts. Technical bulletins may be included with the manual to provide updates.
Nissan forklift o frame -opc series service repair manualfujsjefjkskekfm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift p frame - ps series service repair manualfjskekkwersmem
The document is a service manual for ATLET stackers and provides information about:
1) Safety instructions for working on the trucks, including lifting points and procedures.
2) Technical data and specifications for truck components like the traction motor, gearbox, hydraulic system and control system.
3) Recommended oils, greases and other incidental materials for maintenance and service.
Nissan forklift p frame - psh series service repair manualudfjjsjekkemm
This service manual provides information for servicing ATLET stackers. It describes the structure and contents of the manual, safety instructions that must be followed when working on the trucks, and provides general technical data and component specifications. Technicians should follow the safety protocols, such as removing the battery plug and using lifting points and locks, to prevent injury when servicing the trucks. The manual is divided into tabs covering the different mechanical systems to allow technicians to easily find relevant information.
Nissan forklift p frame - psh series service repair manualdufjdjskkemm
This service manual provides information for servicing ATLET stackers. It describes the general scope and content of the manual, how to use it, important safety instructions, and provides technical data and specifications for the trucks. Key points covered include:
- The manual covers ATLET's PS and PSH stacker models.
- It is organized by subsystem with tabs for things like masts, hydraulics, and electrical systems.
- Safety is paramount when working on trucks and precautions like disabling power, locking out masts, and clearing work areas must be followed.
- Technical data and specifications for truck components are provided for reference during service.
Nissan forklift p frame - ps series service repair manualufsikkdjskemds
This service manual provides information for servicing ATLET stackers. It describes the structure and contents of the manual, safety instructions that must be followed when working on the trucks, and provides general technical data and component specifications. Technicians should follow the safety guidelines, which include removing the battery plug before working on electrical or hydraulic systems, locking the mast during work, and not having other people near the truck during testing. The manual is intended to help technicians efficiently and safely service the trucks.
Nissan forklift p frame - ps series service repair manualdufjdjskkemm
This service manual provides information for servicing ATLET stackers. It describes the general scope and content of the manual, how to use it, important safety instructions, and provides technical data and specifications for the trucks. Key points covered include:
- The manual covers ATLET's PS and PSH stacker models.
- It is organized by subsystem with tabs for things like masts, hydraulics, and electrical systems.
- Safety is paramount when working on trucks and precautions like disabling power, locking masts, and clearing work areas must be followed.
- Technical data and specifications for truck components are provided for reference during service.
Nissan forklift p frame - psh series service repair manualfjskekkwersmem
The document is a service manual that provides information for servicing PS and PSH stacker trucks. It includes sections on safety instructions, technical data, component specifications, and recommended oils and greases. The manual describes the intended use, safety protocols, and procedures for inspection, maintenance and repair of the trucks. It also provides the truck designations, specifications for components like the traction motor and hydraulic system, and diagrams showing permitted lifting points and dimension designations.
Nissan forklift p frame - psd series service repair manualdufjdjskkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Nissan forklift p frame - pll series service repair manualufjjjsekkmdm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - psl series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides information on the structure and content of the manual, as well as safety instructions for working on the machines. Technical data and component specifications for the PLL and PSD models are also included.
Nissan forklift p frame - pll series service repair manualkksjefkksem
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psd series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - pll series service repair manualfjskekdmmse
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psl series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Case ih magnum 250 tractor service repair manual [z8 rx06001 ]fhsjejfsekkkm
This document is a service manual that provides information on maintenance and repair for various systems on Magnum tractors models 225, 250, 280, 310 and 335. It includes sections covering distribution systems, power production, power train, travelling, body and structure, working arm, and introduction/safety information. The manual provides specifications, diagrams and instructions for tasks such as adjusting regulated hydraulic pressure, testing hydraulic pump flow, and servicing other components.
Case ih axial flow 9230 combine service repair manual (pin ydg222001 and above)fhsjejfsekkkm
This service manual provides maintenance and repair information for Axial-Flow 7230, 8230, and 9230 combines with PIN numbers starting with YDG222001. The manual includes sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments/headers, product feeding, threshing, and other systems. It provides detailed information on maintenance, troubleshooting, and repair of components.
Massey ferguson mf397 t tractor service parts catalogue manual (part number ...fhsjejfsekkkm
This document provides part numbers and descriptions for components of a Massey Ferguson 397 T tractor engine. It includes lists of parts for the engine assembly, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each item lists the part number, quantity, description, and additional comments as needed.
Massey ferguson mf 1130 tractor service parts catalogue manualfhsjejfsekkkm
This document provides a parts list and exploded diagrams for the cylinder block of a Massey Ferguson 1100/1130 tractor with a gas engine. It includes 58 numbered parts with descriptions and part numbers. Annotations provide additional part number options and notes for different engine serial number ranges. Diagrams show the assembly of the cylinder block and related components.
Massey ferguson mf 690 tractor (gb) service parts catalogue manual (part numb...fhsjejfsekkkm
This document provides a parts list for the engine installation of an MF 690 tractor. It includes 23 numbered parts for the engine, with descriptions and part numbers. Belts, bolts, nuts, dowels and other basic parts are included. The fan, bearing assembly and Perkins engine are listed.
Massey ferguson mf 675 tractor (gb) service parts catalogue manual (part numb...fhsjejfsekkkm
This document provides a parts list for an MF 675 tractor engine. It includes 24 items related to the engine installation, 26 items for the cylinder block, 20 items for the crankshaft, pistons and connecting rods, 34 items for the cylinder head, 12 items for the rocker shaft, and 30 items for the timing gear and camshaft. The parts are identified by number, description, and other identifying information.
Massey ferguson mf 550 tractor (gb) service parts catalogue manual (part numb...fhsjejfsekkkm
This document provides a parts list for an MF 550 tractor engine. It includes 3 pages of detailed parts listings with images of the engine components. The parts are grouped into sections for the cylinder block, cylinder head, crankshaft, and other engine systems like air induction/exhaust and timing gears. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 387 tractor service parts catalogue manual (part number 3...fhsjejfsekkkm
This document contains parts listings and diagrams for the engine of a Massey Ferguson 387 tractor. It includes 6 pages describing parts for the engine block, cylinder head, crankshaft, pistons, connecting rods, and rocker shaft. The listings include part numbers, quantities, descriptions, and other identifying information for replacement and servicing of engine components.
Massey ferguson 6290 tractor service parts catalogue manual (part number 163...fhsjejfsekkkm
This document provides part numbers and descriptions for engine components of Massey Ferguson 6270, 6280, and 6290 tractors. It includes listings for the engine, belts, clutches, fans, brackets, covers, starters, alternators, fasteners, hoses, and other engine parts. Footnotes provide additional details and specifications for some parts. The document appears to be a reference guide for maintenance and repair of engines for the listed tractor models.
John deere la115 lawn tractor service repair technical manual (tm103419)fhsjejfsekkkm
This technical manual provides instructions for servicing John Deere LA series tractors models LA105, LA115, LA125, LA135, LA145, LA155, LA165 and LA175. The manual contains sections on specifications, component locations, schematics, theory of operation, diagnostics, testing, repair and safety information. Safety messages in the document warn technicians of hazards and recommend precautions to take when working on the equipment.
Caterpillar cat 430 e backhoe loader (prefix mxb) service repair manual (mxb0...fhsjejfsekkkm
The document provides instructions for disassembling the transmission of a 430E Backhoe Loader. It lists required tools and gives step-by-step instructions to remove the transmission case, drain the oil, and disassemble internal components like gears, shafts, seals and bearings. Detailed illustrations accompany each step to show how to use specialty tools to compress springs, remove retaining rings, and press off hardened components from the transmission case.
More Related Content
Similar to Nissan forklift p frame - ppc series service repair manual
Nissan forklift p frame - ps series service repair manualdufjdjskkemm
This service manual provides information for servicing ATLET stackers. It describes the general scope and content of the manual, how to use it, important safety instructions, and provides technical data and specifications for the trucks. Key points covered include:
- The manual covers ATLET's PS and PSH stacker models.
- It is organized by subsystem with tabs for things like masts, hydraulics, and electrical systems.
- Safety is paramount when working on trucks and precautions like disabling power, locking masts, and clearing work areas must be followed.
- Technical data and specifications for truck components are provided for reference during service.
Nissan forklift p frame - psh series service repair manualfjskekkwersmem
The document is a service manual that provides information for servicing PS and PSH stacker trucks. It includes sections on safety instructions, technical data, component specifications, and recommended oils and greases. The manual describes the intended use, safety protocols, and procedures for inspection, maintenance and repair of the trucks. It also provides the truck designations, specifications for components like the traction motor and hydraulic system, and diagrams showing permitted lifting points and dimension designations.
Nissan forklift p frame - psd series service repair manualdufjdjskkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Nissan forklift p frame - pll series service repair manualufjjjsekkmdm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - psl series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides information on the structure and content of the manual, as well as safety instructions for working on the machines. Technical data and component specifications for the PLL and PSD models are also included.
Nissan forklift p frame - pll series service repair manualkksjefkksem
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psd series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - pll series service repair manualfjskekdmmse
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psl series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Similar to Nissan forklift p frame - ppc series service repair manual (9)
Case ih magnum 250 tractor service repair manual [z8 rx06001 ]fhsjejfsekkkm
This document is a service manual that provides information on maintenance and repair for various systems on Magnum tractors models 225, 250, 280, 310 and 335. It includes sections covering distribution systems, power production, power train, travelling, body and structure, working arm, and introduction/safety information. The manual provides specifications, diagrams and instructions for tasks such as adjusting regulated hydraulic pressure, testing hydraulic pump flow, and servicing other components.
Case ih axial flow 9230 combine service repair manual (pin ydg222001 and above)fhsjejfsekkkm
This service manual provides maintenance and repair information for Axial-Flow 7230, 8230, and 9230 combines with PIN numbers starting with YDG222001. The manual includes sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments/headers, product feeding, threshing, and other systems. It provides detailed information on maintenance, troubleshooting, and repair of components.
Massey ferguson mf397 t tractor service parts catalogue manual (part number ...fhsjejfsekkkm
This document provides part numbers and descriptions for components of a Massey Ferguson 397 T tractor engine. It includes lists of parts for the engine assembly, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each item lists the part number, quantity, description, and additional comments as needed.
Massey ferguson mf 1130 tractor service parts catalogue manualfhsjejfsekkkm
This document provides a parts list and exploded diagrams for the cylinder block of a Massey Ferguson 1100/1130 tractor with a gas engine. It includes 58 numbered parts with descriptions and part numbers. Annotations provide additional part number options and notes for different engine serial number ranges. Diagrams show the assembly of the cylinder block and related components.
Massey ferguson mf 690 tractor (gb) service parts catalogue manual (part numb...fhsjejfsekkkm
This document provides a parts list for the engine installation of an MF 690 tractor. It includes 23 numbered parts for the engine, with descriptions and part numbers. Belts, bolts, nuts, dowels and other basic parts are included. The fan, bearing assembly and Perkins engine are listed.
Massey ferguson mf 675 tractor (gb) service parts catalogue manual (part numb...fhsjejfsekkkm
This document provides a parts list for an MF 675 tractor engine. It includes 24 items related to the engine installation, 26 items for the cylinder block, 20 items for the crankshaft, pistons and connecting rods, 34 items for the cylinder head, 12 items for the rocker shaft, and 30 items for the timing gear and camshaft. The parts are identified by number, description, and other identifying information.
Massey ferguson mf 550 tractor (gb) service parts catalogue manual (part numb...fhsjejfsekkkm
This document provides a parts list for an MF 550 tractor engine. It includes 3 pages of detailed parts listings with images of the engine components. The parts are grouped into sections for the cylinder block, cylinder head, crankshaft, and other engine systems like air induction/exhaust and timing gears. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 387 tractor service parts catalogue manual (part number 3...fhsjejfsekkkm
This document contains parts listings and diagrams for the engine of a Massey Ferguson 387 tractor. It includes 6 pages describing parts for the engine block, cylinder head, crankshaft, pistons, connecting rods, and rocker shaft. The listings include part numbers, quantities, descriptions, and other identifying information for replacement and servicing of engine components.
Massey ferguson 6290 tractor service parts catalogue manual (part number 163...fhsjejfsekkkm
This document provides part numbers and descriptions for engine components of Massey Ferguson 6270, 6280, and 6290 tractors. It includes listings for the engine, belts, clutches, fans, brackets, covers, starters, alternators, fasteners, hoses, and other engine parts. Footnotes provide additional details and specifications for some parts. The document appears to be a reference guide for maintenance and repair of engines for the listed tractor models.
John deere la115 lawn tractor service repair technical manual (tm103419)fhsjejfsekkkm
This technical manual provides instructions for servicing John Deere LA series tractors models LA105, LA115, LA125, LA135, LA145, LA155, LA165 and LA175. The manual contains sections on specifications, component locations, schematics, theory of operation, diagnostics, testing, repair and safety information. Safety messages in the document warn technicians of hazards and recommend precautions to take when working on the equipment.
Caterpillar cat 430 e backhoe loader (prefix mxb) service repair manual (mxb0...fhsjejfsekkkm
The document provides instructions for disassembling the transmission of a 430E Backhoe Loader. It lists required tools and gives step-by-step instructions to remove the transmission case, drain the oil, and disassemble internal components like gears, shafts, seals and bearings. Detailed illustrations accompany each step to show how to use specialty tools to compress springs, remove retaining rings, and press off hardened components from the transmission case.
Caterpillar cat 430 e backhoe loader (prefix eat) service repair manual (eat0...fhsjejfsekkkm
The document provides instructions for removing and installing a steering cylinder on a 430E backhoe loader. It describes:
1) Removing the front axle, tie rods, and bolts to remove the steering cylinder.
2) Installing the steering cylinder by applying thread lock compound to the bolts and tightening to the specified torque. Reinstalling the tie rods.
3) Instructions are also provided for removing and installing a steering cylinder on a two-wheel drive 430E backhoe loader, which involves disconnecting hydraulic hoses.
Caterpillar cat 430 e backhoe loader (prefix ddt) service repair manual (ddt0...fhsjejfsekkkm
The document provides instructions for removing and installing the front drive shaft on a 430E Backhoe Loader. It lists the required tools and presents the removal procedure in 6 steps: 1) Remove bolts and lower the guard, 2) Remove bolts, 3) Remove bolts and remove the front drive shaft, 4) Install the front drive shaft and bolts, 5) Install bolts, and 6) Install the guard and bolts. The installation procedure is presented in 3 corresponding steps.
Caterpillar cat 430 d backhoe loader (prefix bnk) service repair manual (bnk0...fhsjejfsekkkm
The document provides instructions for assembling and installing the transmission on a 430D backhoe loader. It details assembling the various transmission components like bearings, gears, shafts, and cases. It also describes installing the assembled transmission into the vehicle and making final connections. The transmission assembly involves multiple steps of pressing, heating, and inserting components in the correct order.
Caterpillar cat 430 d backhoe loader (prefix bnk) service repair manual (bnk0...fhsjejfsekkkm
The document provides step-by-step instructions for disassembling the transmission of a 430D backhoe loader. It lists 30 steps to remove components like valves, seals, shafts, bearings and housings. Tools required are also listed. The transmission is first removed from the vehicle and then its major internal components are dismantled, with each part labeled in illustrations. Separate sections provide further instructions to disassemble individual components like the output shaft.
Caterpillar cat 430 d backhoe loader (prefix bnk) service repair manual (bnk0...fhsjejfsekkkm
The document provides instructions for assembling and disassembling components of the rear axle housing and final drive for a 430D Backhoe Loader. It includes step-by-step procedures for installing bearings and seals, adjusting end play, and installing planetary gears and carriers. The disassembly process is also outlined which involves removing snap rings, thrust washers, and draining differential fluid.
Caterpillar cat 430 d backhoe loader (prefix bml) service repair manual (bml0...fhsjejfsekkkm
The document provides instructions for removing and installing rear axle components on a 430D backhoe loader, including tie rods, the drive and steering axle, final drive, and more. The procedures include using various tools to remove nuts, bolts, pins, brackets, and other hardware. Detailed illustrations accompany each step to show how to properly support, position, and disassemble the various axle components.
Caterpillar cat 430 d backhoe loader (prefix bml) service repair manual (bml0...fhsjejfsekkkm
The document provides instructions for assembling and installing a transmission (direct drive) for a 430D backhoe loader. It describes cleaning and lubricating transmission components before assembly. It then provides step-by-step instructions to assemble the transmission case, input shaft, reverse shaft, output shafts, and final assembly. It describes using various tools and heating bearing cones to specified temperatures. Finally, it outlines installing the assembled transmission on the backhoe loader.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Nissan forklift p frame - ppc series service repair manual
1. SERVICE MANUAL
Machine: PP*
Manual No: 119036
SERVICEMANUAL
Edition 2008B
Service manual scope ................................................................................................... 1.3
General ................................................................................................................ 1.3
Scope of P series ................................................................................................ 1.3
How to use the manual .................................................................................................. 1.4
Structure .............................................................................................................. 1.4
Symbol key .......................................................................................................... 1.4
Safety instructions ......................................................................................................... 1.5
General ................................................................................................................ 1.5
Lifting the truck .................................................................................................... 1.6
Inspection/Preparations .................................................................................................. 1.6
Permitted lifting points .................................................................................................... 1.6
Welding of truck ................................................................................................... 1.8
Atlet cares about the environment ....................................................................... 1.8
Environmental impact .......................................................................................... 1.8
Waste .................................................................................................................. 1.8
Preparations ................................................................................................................... 1.9
Service ................................................................................................................. 1.9
Troubleshooting ................................................................................................... 1.9
Data PP* ........................................................................................................................ 1.10
Designations ...................................................................................................... 1.10
Truck designation ...................................................................................................... 1.10
Type designation .......................................................................................................... 1.11
Dimensions and weights .................................................................................... 1.14
Machine specification ................................................................................................... 1.15
Component specifications .............................................................................. 1.16
Recommended incidental material ............................................................................. 1.18
Oil and grease ................................................................................................... 1.18
Standards and abbreviations ...................................................................................... 1.19
2. SERVICEMANUAL
1.2
Screws ...............................................................................................................1.19
Tightening torque, bolts and nuts ................................................................................ 1.19
Bolt types and tensile grades ....................................................................................... 1.19
Tightening torque for hydraulic connections ......................................................1.21
Conversion tables ..............................................................................................1.21
Standard abbreviations ......................................................................................1.22
Colour of truck ....................................................................................................1.22
Colour codes cabling .........................................................................................1.23
Designations ......................................................................................................1.23
3. General information and technical data / Service manual scope / General 1.3
SERVICEMANUAL
SM_PPX_01_2008B.fm
Edition 2008B
1 General information and technical data
Service manual scope
General
This manual describes the service procedure for ATLET Low Picking Truck PP*. Use the
manual for quick and correct service of respective truck models.
You may find inconsistencies in the manual compared to the models supplied due to
optional designs, upgrades and the like.
Warning!
If the truck is rebuilt after delivery or supplemented in such a manner that safety
may be compromised, ATLET or its authorised representative must be contacted.
Any modifications to the truck are only permitted by authorised personnel. Only in cases
where a truck manufacturer is no longer a going concern and where no other company
has taken over the operations of said truck manufacturer may the user change or modify
the truck, and then only providing the user:
• Arranges that the modification or change is designed, tested and implemented by
one or more industrial truck experts, and includes the safety aspect.
• Prepares and keeps permanent documentation covering design, tests and
implementation of the modification or change.
• Approves and makes appropriate changes to identification plate, decals, markings
and in the instruction manuals.
• Attaches a permanent and clearly visible sign or similar that details the way in
which the truck has been modified or changed together with the date of the
modification or change and the name and address of the organisation that carried
out the task.
The content of this service manual is protected by copyright law and may not be copied,
fully or in part, without written permission. The material has undergone careful
examination with regard to correctness. We reserve the right to make alterations. In the
event of contradictory information in the Swedish and translated editions, it is the
Swedish edition that applies.
Modifications and updates will be distributed via ATLET AB Service Manual Change.
Scope of P series
This manual covers the Low Picking Trucks PPC, PPD, PPL, PPF and PPS. For a
description, see Table 1.1 “Truck designations” on page 10.
4. 1.4 General information and technical data / How to use the manual / Structure
SERVICEMANUAL
How to use the manual
Structure
The manual is arranged according to the same principles as ATLET's spare part
catalogues, with the truck divided into one subsystem per Tab.
Tabs 1-3 in this manual contain comprehensive information regarding technical data,
service instructions and tools.
Tabs 4-12 in the manual contain information limited to a specific part of the truck dealing
with the mechanical operation of the various components, for example, Masts (Tab 6) and
Hydraulic System (Tab 8).
The software is described under Tab 10.
The main principle for extra accessories is to place them under the relevant Tab.
Otherwise they are placed under Tab 12 “Miscellaneous”. For this reason Tab 12 is not
always included in the Service Manual.
For specific problems and information about procedures, look in the main index for the
correct section in the manual.
Symbol key
Warning!
Indicates risk of personal injury.
Important!
Indicates risk of damage to truck.
Note!
Indicates general observations.
5. General information and technical data / Safety instructions / General 1.5
SERVICEMANUAL
Safety instructions
General
Extreme importance must be placed on precautionary measures to avoid accidents during
all work on the vehicle.
A general rule is always to implement preventive measures that are adapted to the type
of vehicle to be worked on. The general rules below must always be observed:
• Smoking or naked flames are strictly forbidden as there is a risk of explosion in the
vicinity of batteries and while working on gas equipped vehicles.
• The battery should always be protected during grinding work.
• Local fire regulations should be observed.
• Always lift the drive wheel free from the floor during service work to prevent the
vehicle from moving.
• Remove the battery plug before working on the electrical system. The battery plug
may only be connected while troubleshooting, and when the greatest of care is
exercised, (with the truck raised).
• In order to avoid crushing injuries, always remove the battery plug when working
on or around masts and hydraulic units. The mast or hydraulic unit may be actuated
due to an electrical fault or a mistake while working.
Warning!
Having live current connected to the truck when working on and around the mast
can be fatal!
• When working on and around the lifting device and hydraulic unit, they must be
locked by using the mast lock, wooden blocks or some other appropriate means.
• No other persons should be in the vicinity of the truck when it is test run in
conjunction with repair work, in view of the risk of accidents or near-incidents
from the truck making an unexpected manoeuvre.
• The system should not be pressurised, e.g. the pump motor shut off and the forks in
lowest position, when dismantling parts of the hydraulic system.
• Remove all metal objects such as watches, chains, glasses and rings when working
on the electrical system, or in its immediate vicinity. A short-circuit from such
objects may result in serious burn injuries.
Warning!
Great caution must be observed when dismantling the gas springs.
1. Make sure that no other persons are in the vicinity or in the lengthwise direction
of the gas spring.
6. 1.6 General information and technical data / Safety instructions / Lifting the truck
SERVICEMANUAL
2. Stand to the side of the gas spring when removing.
Never point the gas spring at any person or part of the body.
Lifting the truck
Inspection/Preparations
• When the truck is lifted using a jack, make sure you secure it with blocks. The
truck must not rest on the jack while work is carried out.
• Ensure that straps, wires or chains have a sufficient lifting capacity before lifting
the truck.
• Ensure that the drive wheel runs free of the floor before troubleshooting the
electrics.
Permitted lifting points
Figure 1.1 shows where the permitted lifting points are located on the truck.
Warning!
Never lift the truck using points other than those specified.
Figure 1.1 Permitted lifting points
SM_PPX_01_0001A.eps
7. General information and technical data / Safety instructions / Lifting the truck 1.7
SERVICEMANUAL
.
Figure 1.2 shows where the jack is to be placed.
Figure 1.2 Lifting point, jack
8. 1.8 General information and technical data / Safety instructions / Welding of truck
SERVICEMANUAL
Welding of truck
• For welding work, always disconnect the battery plug along with all connections to
controllers and regulators (applies to all electronic units). Following completion of
the welding work, connect all connectors to the electronic units first, followed by
the battery plug to the battery.
• Always connect the return current clamp as close to the welding area as possible to
eliminate damage to surrounding components.
Atlet cares about the environment
The majority of our products consist of metal, and can be fully recycled.
Environmental impact
All products have an impact on the environment throughout their entire life cycle.
The consumption of energy during their use is one of the most important factors that
influences the environment.
Through correct care, maintenance and use, the consumption of energy can be reduced,
thereby alleviating the environmental impact.
Waste
Waste material in conjunction with repairs, maintenance, cleaning, or scrapping, must be
collected and disposed of in an environment-friendly way and in accordance with the
directives of the relevant country. Only carry out this type of work in areas intended for
this purpose.
Recyclable material should be taken care of by specialists.
Environmentally hazardous waste, such as oil filters, batteries and electronics, can have
a negative effect on the environment, or health, if handled incorrectly.
9. General information and technical data / Preparations / Service 1.9
SERVICEMANUAL
Preparations
Service
• Go through all safety instructions
• Make sure that you have all the essential tools close at hand before starting work.
• Before disconnecting cabling or other electrical components, check the colour
codes and check for damage to cables or connections.
• When complex components are repaired and dismantled, work methodically to
avoid the risk of mixing component parts.
• When repairing or maintaining sensitive components, make sure that you use clean
tools and work on a clean work surface.
• Dismantle, inspect and adjust components according to the prescribed routines.
See relevant Tab for detailed information.
Troubleshooting
When you suspect a faulty component, do not replace it immediately. Start by checking
the surrounding equipment and then run a complete troubleshooting procedure as
specified in the troubleshooting chart. Make sure you know the reason for the fault before
replacing a component.
10. 1.10 General information and technical data / Data PP* / Designations
SERVICEMANUAL
Data PP*
Designations
Truck designation
*See Key to model designation on page 13.
Table 1.1 Truck designations
Truck type PPL Low picking truck, low-lifters
PPD Low picking truck, low-lifters+driver-lift
PPF Low picking truck, fork-lift
PPC Low picking truck, fork-lift+driver-lift
PPS Low picking truck, scissor lift
PPS D* Low picking truck, scissor lift + operator lift
Load capacity PPL 2000 kg
PPD 2000 kg
PPF 1200 kg
PPC 1200 kg
PPS 2000 kg
11. General information and technical data / Data PP* / Designations 1.11
SERVICEMANUAL
Type designation
1. Model designation.
2. Type Serial No./Version (S=Special design)
3. Year of manufacture, week and guarantee limit in months
(providing that the service instructions in the warranty are observed).
4. Any load restrictions due to the positioning of the load on the forks (D) and/or
lifting height (Q).
Figure 1.3 Example of identification plate (–2006w36)
SM_PPX_01_0003A.eps
1
ModellModell
ModelModel
ModellModell
ModèleModèle
TillverkningsårTillverkningsår
Year of constructionYear of construction
BaujahrBaujahr
Année de constructionAnnée de construction
Tillåten lastTillåten last
Load capacityLoad capacity
TragfähigkeitTragfähigkeit
Charge limiteCharge limite
TyngdpunktsavståndTyngdpunktsavstånd
Distance of load centerDistance of load center
LastschwerpunktabstandLastschwerpunktabstand
Distance de centreDistance de centre
TillverkareTillverkare
ManufacturerManufacturer
HerstellerHersteller
FabriccatFabriccat
Serie nr.Serie nr.
Serial no.Serial no.
Serien-NrSerien-Nr
Nº de serieNº de serie
Batteri vikt min.Batteri vikt min.
Battery weight min.Battery weight min.
Batteriegewicht min.Batteriegewicht min.
Poids de batterie mini.Poids de batterie mini.
Batteri vikt max.Batteri vikt max.
Battery weight max.Battery weight max.
Batteriegewicht max.Batteriegewicht max.
Poids de batterie maxi.Poids de batterie maxi.
BatterispänningBatterispänning
BatteryvoltageBatteryvoltage
BatteriespannungBatteriespannung
Tension de la batterieTension de la batterie
Vikt utan batterieVikt utan batterie
Weight without batteryWeight without battery
KgKg
KgKg
KgKg
KgKg
Atlet AB Mölnlycke SwedenAtlet AB Mölnlycke Sweden
V- DCV- DC
Gewicht ohne BatterieGewicht ohne Batterie
Poids propre sans batteriPoids propre sans batteri2
3
4
12. 1.12 General information and technical data / Data PP* / Designations
SERVICEMANUAL
1. Model designation.
2. Type Serial No./Version (S=Special design)
3. Year of manufacture, week and guarantee limit in months
(providing that the service instructions in the warranty are observed).
4. Any load restrictions due to the positioning of the load on the forks (D) and/or
lifting height (Q).
Figure 1.4 Example of identification plate (2006w37–)
1
2
3
4
SM_PPX_01_0011A.eps
Model
Modell
Serial no.
Serie nr.
Year of manufacturing
Tillverkningsår
Load capacity
Tillåten last
Load centre distance
Tyngdpunktsavstånd
Weight without battery
Vikt utan batteri
Battery weight min.
Batterivikt min.
Battery weight max.
Batterivikt max.
Battery voltage
Batterispänning
Refernce number
Referensnummer
ATLET AB MÖLNLYCKE SWEDEN
13. General information and technical data / Data PP* / Designations 1.13
SERVICEMANUAL
Note!
In cases where the machine plate has been lost or become illegible, it must be re-
newed immediately. In order to identify the machine's serial number, there is a plate
located on each main component such as drive motor, gearbox, hydraulic unit,
TMC etc. For some machines there is even a plate attached inside the battery com-
partment, or serial number punched on the side of the mast.
Explanation of model designation
Figure 1.5 Example of plate with serial number.
Example: PPL T D 200
Truck type
T=Tiller arm
S=Servo
D=driver lift, only specified for
PPS
Load capacity/10
SER XXXXXX
WEEK XXXX
SER XXXXXX
WEEK XXXX
14. 1.14 General information and technical data / Data PP* / Dimensions and weights
SERVICEMANUAL
Dimensions and weights
Dimensions PP*
Figure 1.6 Positions for dimensions PP*
15. General information and technical data / Data PP* / Dimensions and weights 1.15
SERVICEMANUAL
Machine specification
No. PPL/PPD PPF/PPC PPS
1
1a
Lifting capacity, rated
Centre of gravity distance
Q
D
kg
mm
2000
600
1200
600
2000
1200
2
2a
2a
2b
2c
2d
Lift height
Mast height
Lift height, operator lift
Transport, free lift
Full free lift
Support arm lifting
H4
H3/H5
H2 T mast
H2 DT mast
mm
mm
mm
mm
mm
230 950
1502
900
1502
950
4
4a
4b
Lifting speed without load - with rated load
Lifting time without load - with rated load
Lift speed, operator lift with load, 100 kg
m/s
s
s
0,07-0,06
2,0-2,4
0,22-0,13
4,0-6,6
0.16-0.095
5.0-8.6
2.5
5
5a
Lowering speed without load - with rated load
Lowering time without load - with rated load
m/s
s
0,055-0,052
2,6-2,8
0,01-0,11
8,7-7,7
0.089-0.082
9.2-9.9
6 Driving speed without load - with rated load
Driving speed without load - with rated load
km/h
m/s
12,0-10,0
3,3-2,8
12,0-10,5
3,3-2,9
12-10
3.3-2.8
8 Reversing capacity without load - with rated
load
Max % 15 - 7 15 - 9 15 - 9
10 Swivel radius R2 mm 1430 + L2 1536 + L2 1536 + L2
11 Minimum aisle width, Ast incl. 200mm R2-
L2+load length +200
Load length 800mm
Load length 1000mm
Load length 1200mm
Ast
Ast
Ast
mm
mm
mm
13
13a
13b
13b
13c
13d
Height above protective roof
Seat height
Instep height
Entry height, fixed platform - operator lift
Floor height
Width, gate opening
H6
H7
Y1
mm
mm
mm
mm
mm
mm
123 (PPD 146) 123 (PPC 146)
123 - 146
14 Truck length L mm 1430 + L1 1536 + L1 1536 +L1
15
15c
Truck width
Platform length
B mm
mm
790
449
790
449
790
449
16 Fork length L1 mm 1150 - 2375 1000 - 2165 2400
17
17a
Width above fork grapples
Width between forks
V mm
mm
680 / 480
V - 350
700 / 540
V - 340/350
560
V - 370
19 Truck length to the withdrawn support surface
of the fork
L4 mm 1430 1536 1536
20
20a
Fork arm width - thickness
Fork height, lowered
B1
H1
mm
mm
175 - 55
85
170/175 - 65
85
185 - 70
85
21 Straddle lift height H8 mm 80
22
22a
Width between straddle lifts
Width above straddle lifts
B2 mm 246/266/386
495/515/635
230
520
23 Dimensions, front axle - fork support surface L2 mm 975 - 1465 650 - 1050 1610
24 Axle distance L3 mm 1251 + L2 1358 + L2 1358 + L2
25 Track, front, rear mm 500 / V - 175 500 / V-170/
175
500 / V-185
26 Ground clearance, half of axle distance mm 55 30 30
27 Service weight with/without battery kg 1125 - 665 1300 - 872 1500 - 1070
28 Max. axle pressure, front without/with rated
load
kg 825 - 1100 880 - 970 1050 - 1400
29 Max. axle pressure, rear without/with rated
load
kg 300 - 2050 420 - 1475 450 - 2300
16. 1.16 General information and technical data / Data PP* / Component specifications
SERVICEMANUAL
Component specifications
39
39a
Battery capacity
Battery voltage
kWh
Ah
V
7.2-14.4
300-600
24
7.2-14.4
300-600
24
7.2-14.4
300-600
24
41 Drive motor kW 2,2 AC 2,2 AC 2,2 AC
42 Speed control AC Transistor AC Transistor AC Transistor
43
43a
Lift motor. Output/duty cycle/connec. time
Hydraulic pressure
kW-%/min
MPa
2.2 - 12/10
16
2.2 - 12/10
16
3.0-12-10
20
44
44a
Wheel type
No. of drive/caster/load wheels
Vulkollan
2-4
Vulkollan
2-4
Solid
(Vulkolan std)
2-4
45
45a
45b
45c
Wheel dimensions
Load wheel D*width
Drive wheel D*width
Caster wheel D*width
mm
mm
mm
(4x) 85x70
(1x)230x90
(1x) 150x55
(4x) 85x70
(1x)230x90
(1x) 150x55
(4x) 85x70
(1x)230x90
(1x) 150x55
46 Steering system Tiller arm Tiller arm Tiller arm std/
Servo
47 Travel brake type - actuated part El. tractionm. El. tractionm. El. tractionm.
48 Parking brake type - actuated part El. tractionm. El. tractionm. El. tractionm.
Table 1.2 Component specifications
Component Specification
Traction motor Drive voltage 24V
Output standard 2.2 kW
60 min
Gearbox Gear ratio (standard) 15:1
Oil volume 0.85 litre
Hydraulic system Max pressure 21 MPa
Oil volume max 6.0 litre
Hydraulic unit (motor and pump) Output 2.2 kW
3,0 kW (PPS)
Control system for traction motor
(TMC)
Type FZ2007 AC1 CAN
Voltage 24 V
Max current 250A (RMS)
in 2 min
Fuses Operating fuse 1 pc 5 A
Pump motor fuse 1 pc 250 A
Traction motor fuse
1 pc
250 A
HVC Voltage 24 V
Max current, out 2A
EPS Voltage 24 V
17. General information and technical data / Data PP* / Component specifications 1.17
SERVICEMANUAL
Max current 50 A
Electric brake Braking force 25 Nm
Table 1.2 Component specifications
Component Specification
18. 1.18 General information and technical data / Recommended incidental material / Oil and grease
SERVICEMANUAL
Recommended incidental material
Oil and grease
Important!
Do not mix different lubricants, particularly synthetic oil with mineral oil as this can
affect the properties of the oil!
Table 1.3 Recommended oil and grease table
Brand Gearbox oil
As per API grade
GL-5
Hydraulic oil
As per ISO VG 32, VG 15
Bearing
grease
NLGI 2
Lithium
baseNormal Cold store Normal
(32)
Cold store
(15)
BP BP Energear
HYPO
80W/140 EP
BP Energear
SHX-S
75W/140 EP
BP Bartran
HV-32
BP Bartran
SHF-S
Energrease
LC 2
Castrol Hypoy C
80 W/90
- Hyspin
SHS 32
Hydraulic oil
OM 15
Alt: Hyspin
AWH 15
LMx
Mobil Mobilube
HD 85 W/90
- DTE 13 M
SHS 32
Flowrex 1 Mobilplex 48
Shell Spirax HD
85 W/90
- Tellus oil
TX 32
Tellus oil T
15
Retinax EP2
Statoil /
Exxon
Gear way G5
80 W/90
- SHS 32 J 26 Uniway
LIX 625
Texaco Geartex EPC
80 W/90
- Rando oil
HDZ 32
Rando oil
HDZ 15
Hytex EP2
19. General information and technical data / Standards and abbreviations / Screws 1.19
SERVICEMANUAL
Standards and abbreviations
Screws
Tightening torque, bolts and nuts
The tightening torques in the table above are standard values. In some cases a specific
tightening torque is specified in the relevant sections. If no tightening torque is specified
in the service instructions, the values shown in the table above apply.
Bolt types and tensile grades
Table 1.4 Tightening torque, bolts and nuts
DIM Tensile grade
4.6 8.8 10.9 12.9
Nm Nm Nm Nm
M4 1.1 2.9 4.0 4.9
M5 2.2 5.7 8.1 9.7
M6 3.7 9.8 14 17
M8 8.9 24 33 40
M10 17 47 65 79
M12 30 81 114 136
M14 48 128 181 217
M16 74 197 277 333
M18 103 275 386 463
M20 144 385 541 649
Table 1.5
Figure Screw type Designation Tensile grade
M6S Hexagon screw 8.8
10.9
MC6S Hexagon hole screw 8.8
10.9
12.9
20. 1.20 General information and technical data / Standards and abbreviations / Screws
SERVICEMANUAL
Marking with the manufacturer's trademark, including the tensile grade, is compulsory
for bolts with a thread diameter from 5mm and in tensile grades according to the table
above. Marking only takes place when the shape of the product permits this.
MF6S Hexagon hole screw,
countersunk
10.9
MCS Slotted screw 4.6
MVBF Oval head screw,
countersunk
4.6
Figure 1.7 Example of marking
Table 1.5
Figure Screw type Designation Tensile grade
8.8
12.9
12.9
8.8
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. General information and technical data / Standards and abbreviations / Tightening torque for
SERVICEMANUAL
Tightening torque for hydraulic connections
Conversion tables
Table 1.6 Tightening torque for hydraulic connections
Tightening torque: Pipe thread / metric threads:
Metric fine
thread
Whitworth pipe
thread
MA (Nm) with
ring
MA (Nm) with elastic (O
ring coupling)
M10 x 1 G 1/8" 25 10
M12 x 1.5 30 20
M14 x 1.5 G 1/4" 50 30
M16 x 1.5 G 3/8" 80 35
M18 x 1.5 90 40
M20 x 1.5 G 1/2" 130 50
M22 x 1.5 150 60
M26 x 1.5 250 70
M27 x 1.5 G 3/4" 250 80
M27 x 2 250 90
G 1" 350 140
M33 x 2 400 140
M42 x 2 G 11/4" 600 240
M48 x 2 G 11/2" 800 300
Table 1.7 Conversion table, torque units
Newton metre
(Nm)
Kilopond metre
(kpm)
Pound force inch
(lbg x in)
Pound force foot
(lbf x ft)
1 0.10 8.85 0.74
9.81 1 86.80 7.23
0.11 0.01 1 0.08
1.36 0.14 12.00 1
23. 1.22 General information and technical data / Standards and abbreviations / Standard abbreviations
SERVICEMANUAL
Standard abbreviations
Colour of truck
0
The truck is painted in colours with the following NCS colour designations:
Table 1.8 Conversion table, pressure units
Pa
(N/m2)
Bar
(1mb=1hPa)
at
(kp/cm2)
dry
(mm Hg, 0 C)
atm
1 10 -5 1.020*10 -5 7.501*10 -3 9.869*10 -6
9.807*10 4 0.9807 1 735.6 0.9678
133.3 1.333*10 -3 1.360*10 -3 1 1.316*10 -3
1.013*10 5 1.013 1.033 760 1
Table 1.9 Conversion, table speed
m/s km/h
1 3.6
0.278 1
Table 1.10 Standard abbreviations
Magnitude Unit Designation
Current Ampere A
Voltage Volt V
Resistance Ohm Ω
Output Watt W
Torque Newton metre Nm
Pressure Pascal Pa
Table 1.11 NCS colour designations
Truck colour Designation
Yellow NCS 0070-Y20R
Medium grey NCS 7000
Dark grey NCS 8000
24. General information and technical data / Standards and abbreviations / Colour codes cabling
SERVICEMANUAL
Colour codes cabling
The colour coding for all the cables included in the truck are shown in Atlet's wiring
diagram. The abbreviations have the following meanings:
Note!
Two-colour cables are shown with both colour codes separated by a slash.
E.g. Blue and yellow cable is shown with colour code BL/Y.
Designations
Electric components usually have a designation of two letters:
Table 1.12 Colour codes for Atlet's wiring diagrams
Code Cable colour
Y Yellow
BL Blue
SB Black
W White
GN Green
GR Grey
R Red
BN Brown
VO Violet
P Pink
OR Orange
Table 1.13 First letter
Code Designation
A Component or function without its
own letter in the list
C Capacitor
D/V Diode
E Electrical component
F Fuse
I Indicator
K Connector/relay
L Coil/inductive element
25. 1.24 General information and technical data / Standards and abbreviations / Designations
SERVICEMANUAL
M Motor
P/X Connection
R Resistor
S Switch
T Terminal
Y Valve/brake
H Audible warning unit/light
G Battery
Table 1.14 Second letter
Code Designation
B Brake
C Control system
E Emergency function
F Forward
H Unit of time
K Key
L Lowering
M Manoeuvre
P Pump
R Reverse
S Speed
Table 1.13 First letter
Code Designation