This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
CATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK Service Repair Manualkjmsfm eiokid
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis, Mast and Options: Foreword
Chassis, Mast and Options: General Information
Chassis, Mast and Options: Vehicle Electrical Components
Chassis, Mast and Options: Power Train
Chassis, Mast and Options: Transfer Units
Chassis, Mast and Options: Rear Axle
Chassis, Mast and Options: Brake System
Chassis, Mast and Options: Steering System
Chassis, Mast and Options: Hydraulic System
Chassis, Mast and Options: Mast and Forks
Chassis, Mast and Options: Service Data
Chassis, Mast and Options: Options
Controller: Foreword
Controller: Controller
Controller: Troubleshooting for Control Circuits
Controller: Motors
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
CATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK Service Repair Manualkjmsfm eiokid
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis, Mast and Options: Foreword
Chassis, Mast and Options: General Information
Chassis, Mast and Options: Vehicle Electrical Components
Chassis, Mast and Options: Power Train
Chassis, Mast and Options: Transfer Units
Chassis, Mast and Options: Rear Axle
Chassis, Mast and Options: Brake System
Chassis, Mast and Options: Steering System
Chassis, Mast and Options: Hydraulic System
Chassis, Mast and Options: Mast and Forks
Chassis, Mast and Options: Service Data
Chassis, Mast and Options: Options
Controller: Foreword
Controller: Controller
Controller: Troubleshooting for Control Circuits
Controller: Motors
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT EP16NT FORKLIFT LIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Nissan forklift o frame -opc series service repair manual
1. SERVICE MANUAL
Machine: OP
Manual nr: 005949
ATLET SERVICE MANUAL
Edition 2008B
General information and technical data
1.1 Introduction ...................................................................................................................1.1
1.2 General information, OP series ...................................................................................1.2
1.3 How to use the manual .................................................................................................1.3
1.3.1 History .............................................................................................................1.3
1.3.2 Symbol key ......................................................................................................1.4
1.4 Tips before next step ....................................................................................................1.5
1.4.1 Lifting points ....................................................................................................1.5
1.4.2 Safety instructions ...........................................................................................1.6
1.4.3 General safety risks when working on fork trucks ...........................................1.6
1.4.4 Environmentally hazardous waste – environment ...........................................1.7
1.4.5 Handling ..........................................................................................................1.7
1.4.6 Trouble shooting ..............................................................................................1.8
1.5 Data OP ..........................................................................................................................1.9
1.6 Dimensions and weights ............................................................................................1.13
1.6.1 Dimensions OP .............................................................................................1.13
1.7 Overview of motor compartment ...............................................................................1.14
1.8 Component specification ...........................................................................................1.15
1.9 Tightening torque .......................................................................................................1.17
1.9.1 Conversion table ...........................................................................................1.18
1.9.2 Bolt types and tensile grades ........................................................................1.18
2. ATLET SERVICE MANUAL
1.10 Lubrication chart ...................................................................................................... 1.20
1.10.1 Lubrication chart OP ................................................................................... 1.20
1.10.2 Symbol explanations, lubrication chart ....................................................... 1.21
1.11 Recommended oil and grease types ...................................................................... 1.22
1.12 Colour of the truck in accordance with NCS colour codes .................................. 1.23
1.13 Colour codes for Atlet’s wiring diagrams .............................................................. 1.24
1.14 Designations for electrical components ................................................................ 1.25
1.15 Technical abbreviations ........................................................................................... 1.26
1.16 Recommended replacement ................................................................................... 1.27
3. General information and technical data 1.1
Introduction SERVICE MANUAL
Edition 2008B
1 General information and technical data
00000000
1.1 Introduction
This manual describes the service procedures for ATLET picking trucks in the OP
series. Use the manual for quick and correct service of respective truck models.
You may find contradictions in the manual compared to the models supplied due to
optional designs and the like.
Warning!
If the truck is rebuilt after delivery or supplemented in such a manner that
safety may be affected, ATLET AB or its authorised representative should be
contacted.
The content of this service manual is protected by copyright law and may not be
copied, fully or in part, without written permission. The material has undergone
careful examination with regard to correctness. Subject to alteration.
In the event of inconsistent information in the Swedish and translated editions, it is
the Swedish edition that applies.
Modifications and updates will be distributed via ATLET AB Service Manual
Change.
4. 1.2 General information and technical data
SERVICE MANUAL General information, OP series
1.2 General information, OP series
Picking trucks in the OP series include OPM, OPH, OPC and OPS.
5. General information and technical data 1.3
How to use the manual ATLET SERVICE MANUAL
1.3 How to use the manual
The manual is arranged according to the same principles as ATLET’s spare part
catalogues, i.e. a system consists of 12 sections, where sections 4 -12 contain
information limited to a specific part of the truck. For example, Chassis (section 4)
and Hydraulic System (section 8). Sections 1 - 3 in this manual contain more
comprehensive information regarding technical data, general service, instructions
and tools. The main principle for extra accessories is to place them under the
respective sections. Otherwise they are placed under section 12 “Miscellaneous”.
For this reason section 12 is not always included in the Service Manual.
For specific problems or information about procedures, look in the main index for
the correct section.
1.3.1 History
Important changes to be taken into consideration during service on the OP models.
Table 1.1
Date Chassis no. Changed
2001-03-20 OP1429 New connectors for steering and speed
controller units.
OP1107 New type of cable in the mast.
2001-03-20 OP1429 New attachment plate for both ends of the
electric cables in the mast.
2001-03-20 OP1429 New cabling in the platform.
2001-02-20 OP1429 The E4 card has been replaced with a module
with fixed resistance.
New version of regulator for main hydraulic
valve, with extra electronic filter for improved
reliability.
2001-06-15 OP1496 The Ergomast is welded.
Fixed forks welded at the platform.
OP1377 New type of chain. 5/8 inch.
Third chain removed.
2000-10-06 Alternative safety line available as accessory.
OP1431 Platform lighting changed to two halogen
lamps.
2001-05-14 New decals in new position.
6. 1.4 General information and technical data
SERVICE MANUAL How to use the manual
1.3.2 Symbol key
Warning!
Used with risk of personal injury.
Important!
Used with the risk of damage to the machine.
Note!
Used for general observation.
7. General information and technical data 1.5
Tips before next step ATLET SERVICE MANUAL
1.4 Tips before next step
0
1.4.1 Lifting points
Figure above shows where the permitted lifting points are placed on the truck.
When lifting complete truck: Lift in the first instance in the upper mast strut, point
A. Make sure not to damage the hydraulic pipe between the cylinders.
Lifting with jack: Lift at point C.
Figure 1.1 Lifting points
SM 150.1
B
C
A
8. 1.6 General information and technical data
SERVICE MANUAL Tips before next step
1.4.2 Safety instructions
When the truck is lifted using a jack, make sure you secure it with blocks. The truck
must not rest on the jack, while work is carried out.
Ensure that straps, wires or chains have a sufficient lifting capacity before lifting the
truck.
Pull out the battery plug before working on the electrical system.
Ensure that the drive wheel runs free of the floor before trouble shooting.
The system should not be pressurised, e.g. the pump motor shut off and the forks
down, when dismantling parts of the hydraulic system.
1.4.3 General safety risks when working on fork trucks
Extreme importance must be placed on precautionary measures to avoid accidents
during all work on the vehicle.
A general rule is to always implement preventive measures that are adapted to the
type of vehicle to be worked on. The general rules below must always be observed:
• Smoking or naked flames are strictly forbidden as there is a risk of explosion in
the vicinity of batteries and while working on gas equipped vehicles.
• The battery should always be protected during grinding work.
• The fire regulations for the building should also be observed.
The drive wheel should always be lifted up free from the floor during service work
to prevent the vehicle from moving. The vehicle must not rest solely on the jack, but
must be secured by some form of blocking.
To prevent injuries caused by crushing, the battery plug should always be pulled out
when working around the mast, reach carriage and hydraulic unit on electric Reach
Trucks. The mast, reach carriage and hydraulic unit can be actuated due to an
electrical fault or a mistake while working. The battery plug may only be connected
while trouble shooting, and when the greatest of care is exercised, (with the truck
raised).
Warning!
Standing on the reach carriage between the mast and battery partition with the
current connected to the truck can result in fatal injury!
When working on and around the mast and hydraulic unit, they must be locked by
using a mast lock, wooden blocks or some other appropriate means.
No other persons should be in the vicinity of the truck when it is test run in
conjunction with repair work, in view of the risk of accidents or near-accidents
caused by the truck making an unexpected manoeuvre.
When working on the gas equipment on gas driven vehicles the gas system should
be emptied first, if possible, by shutting the main tap and running the motor or
equipment until the system is empty and stops.
9. General information and technical data 1.7
Tips before next step ATLET SERVICE MANUAL
Escaping gas is heavier than air and has a tendency to collect in cavities, and can be
ignited by sparks or a naked flame. The machine should therefore be ventilated with
compressed air before service work is begun. Ventilation should also be carried out
after repairs before the motor or another unit is started, since sparks from the starter
or relays can cause explosions.
The system should not be pressurised, e.g. the pump motor shut off and the forks
down, when dismantling parts of the hydraulic system.
All metal objects such as watches and rings should be removed when working on
the electrical system, or in its immediate vicinity. A short-circuit from such objects
can result in serious burn injuries.
1.4.4 Environmentally hazardous waste – environment
Atlet AB takes care of the environment. Waste material in conjunction with repairs,
maintenance, cleaning, or scrapping, should be collected and disposed of in an
environment-friendly way and in accordance with the directives of respective
countries. Such work must only be carried out in areas intended for this purpose.
Environmentally hazardous waste, such as oil filters, batteries, hydraulic hoses and
electronics, can have a negative effect on the environment, or health, if handled
incorrectly. Recyclable material should be taken care of by specialised authorities.
1.4.5 Handling
Make sure that you have all the essential tools close at hand before starting work.
Before cabling or other electrical components are disconnected, check the colour
codes and check for damage to cables or connections.
When complex, complete components are repaired and dismantled, make sure that
you have good control of the different component parts to avoid the risk of confusion.
When repairing or maintaining sensitive components, make sure that you use clean
tools and work on a clean work surface.
Dismantle, inspect and adjust components according to the prescribed routines. See
respective sections for detailed information.
Make sure that gaskets and O-rings, etc. are replaced with new parts each time they
are dismantled.
Always use ATLET’s original spare parts.
Use the screws and bolts specified in the spare parts catalogue. Tighten according
to instructions. In those cases where the tightening torque is not specified, refer to
the table of standard tightening torque in section 1.7.
10. 1.8 General information and technical data
SERVICE MANUAL Tips before next step
1.4.6 Trouble shooting
When you suspect a faulty component, do not replace it immediately. First check
the surrounding equipment and carry out complete trouble shooting routines. Make
sure you know the reason for the fault before replacing a component.
11. General information and technical data 1.9
Data OP ATLET SERVICE MANUAL
1.5 Data OP
0
Figure 1.2 Type designations (example)
Load capacity/10
125 STV S 360 225 40 .../ / /
Narrow track S
Wide track B
Telescopic mast T
Telescopic free lift mast
Dual telescopic mast
Dual telescopic free lift mast DTF
DT
TF
Free visibility mast V
Stabilisers S
Adjustable straddle legs H
Lifting height in cm
Battery Ah/5
Battery charger Ampere
Model type OPM, OPC, OPH, OPS
SM 151.1E
12. 1.10 General information and technical data
SERVICE MANUAL Data OP
1. Type designation.
2. Serial number.
3. Year of manufacture and warranty period in months.
Figure 1.3 Machine name-plate (–2006w36)
D H
Q
ATLETAB MÖLNLYCKE SWEDEN
H D QH D Q
MODELL
MODEL
MODELL
MODELE
SERIE NR.
SERIAL NO.
SERIEN NR.
NOMERO DESERIE
TILLV. ÅR
YEAR OF MANUF.
BAUJAHR
AN DE FABR
TILLÅTEN LAST
ACTUAL CAPACITY
WIRKLICHE TRAGFÄHIGKEIT
CAPACITE EFFECTIVE
LYFTHÖJD
LIFTHEIGHT
HUBHÖHE
HAUTEURDE LEVEE
TYNGDPUNKTSAVSTÅND
BATTERISPÄNNING
BATTERY VOLTAGE
BATTERIESPANNUNG
TENSION DE LA BATTERIE
VIKT UTAN BATTERI
WEIGHT WITHOUT BATTERY
GEWICHT OHNE BATTERIE
MASSE SANS BATTERIE
MINSTA BATTERIVIKT
MINIMUM BATTERY WEIGHT
MINDESTGEWICHT DER BATTERIE
MASSE MINIMAL DE LA BATTERIE
MAXIMAL BATTERIVIKT
MAXIMUM BATTERY WEIGHT
HÖCHSTGEWICHT DER BATTERIE
MASSE MAXIMAL DE LA BATTERIE
LOAD CENTRE DISTANCE
LASTSCHWERPUNKT
DISTANCE DE CENTRE
MMMM MMMM KGKG
KG
VOLT-DC
KG
KG
1
2
3
13. General information and technical data 1.11
Data OP ATLET SERVICE MANUAL
1 Type designation.
2. Serial number.
3. Year of manufacture and warranty period in months.
Note!
In cases where the machine plate has been lost or become illegible, it must be
renewed immediately. In order to identify the machine's serial number, there
is a plate located on each main component such as drive motor, gearbox,
hydraulic unit, TMC etc. For some machines there is even a plate attached
inside the battery compartment, or serial number punched on the side of the
mast.
Figure 1.4 Machine name-plate (2006w37–)
Model
Modell
Serial no.
Serie nr.
Year of manufacturing
Tillverknings r
Weight without battery
Vikt utan batteri
Battery weight min.
Batterivikt min.
Battery weight max.
Batterivikt max.
Battery voltage
Batterisp nning
Refernce number
Referensnummer
ATLET AB M LNLYCKE SWEDEN
H (mm)
H
XXXXXXXX
Q (kg)D (mm)
D
Q
3
2
1
SMOP_010101.eps
14. 1.12 General information and technical data
SERVICE MANUAL Data OP
Figure 1.5 Example of plate with serial number.
Figure 1.6 Serial number
SER XXXXXX
WEEK XXXX
SER XXXXXX
WEEK XXXX
SM 153.1E
Serial number
15. General information and technical data 1.13
Dimensions and weights ATLET SERVICE MANUAL
1.6 Dimensions and weights
0
1.6.1 Dimensions OP
Figure 1.7
OK 384
L3=1695
730
795
885
760
L1
L
25
1000
H4
H7=175
L2=125
1702000
R2
785
930
B
B3
V
280
H1=85
H3
H5
H6
L4
16. 1.14 General information and technical data
SERVICE MANUAL Overview of motor compartment
1.7 Overview of motor compartment
0
Figure 1.8 Overview
Table 1.2
Position Designation Section
1 Distribution board 10
2 Drive unit 5
3 Hydraulic unit 8
4 Hydraulic tank 8
5 Hydraulic valve 8
6 Servo motor 7
SMOP_010100
1
2
3
4
56
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. General information and technical data 1.15
Component specification ATLET SERVICE MANUAL
1.8 Component specification
0
Table 1.3 Drive motor
Drive motor
(See also section 5, Drive motor)
Output standard 2.1 kW
Table 1.4 Gearbox
Gearbox
(See also section 5, Gearbox)
Gear ratio (standard) 14:1
Oil volume 1.8 litres
Table 1.5 Hydraulic system
Hydraulic system
Max pressure 15 MPa (= 150 kp/cm²)
Table 1.6 Hydraulic unit OPM
Hydraulic unit (motor and pump)
(See also section 8, Hydraulic unit)
Output 3.25 kW
Table 1.7 Hydraulic OPC/OPS
Hydraulic unit (motor and pump)
(See also section 8, Hydraulic unit)
Output 6.8 kW
Table 1.8 Hydraulic unit OPH
Hydraulic unit (motor and pump)
(See also section 8, Hydraulic unit)
Output 4.5 kW
19. 1.16 General information and technical data
SERVICE MANUAL Component specification
Table 1.9 Control system
Control system for motor
Type Curtis 1243 SEPEX Transistor
Voltage 24 V
Table 1.10 Fuses
Fuses
Control fuses 2 pcs. 7.5/10 A
Pump motor fuse 1 pcs. 250 A
Drive motor fuse 1 pcs. 160 A
Steering Supply 30 A
Emergency switch circuit 1 pcs. 7.5 A