The document is a service manual that provides information for servicing PS and PSH stacker trucks. It includes sections on safety instructions, technical data, component specifications, and recommended oils and greases. The manual describes the intended use, safety protocols, and procedures for inspection, maintenance and repair of the trucks. It also provides the truck designations, specifications for components like the traction motor and hydraulic system, and diagrams showing permitted lifting points and dimension designations.
Nissan forklift p frame - ppl series service repair manualfsejfjskefsmem
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details to correctly service the various models.
Nissan forklift p frame - psd series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions for working on the vehicles, including ensuring the drive wheel is lifted and mast is locked before working. It outlines the structure of the manual, with sections covering specific subsystems, and technical data on the truck models. Recommended lubricants and consumables are listed.
Nissan forklift electric p01 series service repair manualfusjjefjkskemem
This document provides an introduction and overview of a service manual for Nissan forklifts models P01 and P02. It includes sections on how to use the manual, identification information, general precautions for maintenance and repair, and specifications for tightening standard bolts. The manual consists of 14 sections covering various systems of the forklift and how to service parts. Technical bulletins may be included with the manual to provide updates.
Nissan forklift o frame -opc series service repair manualfujsjefjkskekfm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift p frame - ppd series service repair manualfjjskekskemmm
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, permitted lifting points, truck designations, dimensions and weights, component specifications, recommended materials, and other reference information needed for servicing the truck.
Nissan forklift p frame - ppl series service repair manualfjksekkmsemm
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details to correctly service the various models.
Nissan forklift p frame - ppl series service repair manualfujjsekskemme
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information. Safety must be followed, including proper lifting of the truck only at designated points and disconnecting power before working on electrical or hydraulic systems.
Nissan forklift p frame - ppf series service repair manualfjsjekskekmmme
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details to correctly service the various models.
Nissan forklift p frame - ppl series service repair manualfsejfjskefsmem
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details to correctly service the various models.
Nissan forklift p frame - psd series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions for working on the vehicles, including ensuring the drive wheel is lifted and mast is locked before working. It outlines the structure of the manual, with sections covering specific subsystems, and technical data on the truck models. Recommended lubricants and consumables are listed.
Nissan forklift electric p01 series service repair manualfusjjefjkskemem
This document provides an introduction and overview of a service manual for Nissan forklifts models P01 and P02. It includes sections on how to use the manual, identification information, general precautions for maintenance and repair, and specifications for tightening standard bolts. The manual consists of 14 sections covering various systems of the forklift and how to service parts. Technical bulletins may be included with the manual to provide updates.
Nissan forklift o frame -opc series service repair manualfujsjefjkskekfm
This document is a service manual for ATLET picking trucks in the OP series. It provides general technical data and specifications for components such as the drive motor, gearbox, hydraulic system, control system, and fuses. Dimensions and diagrams are also included to show the overview of the motor compartment and identify major components. The manual instructs technicians on how to safely service the trucks and properly handle components.
Nissan forklift p frame - ppd series service repair manualfjjskekskemmm
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, permitted lifting points, truck designations, dimensions and weights, component specifications, recommended materials, and other reference information needed for servicing the truck.
Nissan forklift p frame - ppl series service repair manualfjksekkmsemm
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details to correctly service the various models.
Nissan forklift p frame - ppl series service repair manualfujjsekskemme
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information. Safety must be followed, including proper lifting of the truck only at designated points and disconnecting power before working on electrical or hydraulic systems.
Nissan forklift p frame - ppf series service repair manualfjsjekskekmmme
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details to correctly service the various models.
Nissan forklift p frame - ppc series service repair manualfhsjejfsekkkm
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information.
Nissan forklift p frame - ppc series service repair manualfjskekfmsmem
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information.
Nissan forklift p frame - ppd series service repair manualfjsekksmem
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details for quick and correct service of the truck.
Nissan forklift p frame - ppf series service repair manualfjjsekkfksmem
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on truck designations, dimensions, weights, specifications, safety instructions, and procedures for inspection, service, and troubleshooting. Diagrams illustrate permitted lifting points and dimensions. Tables provide data on truck types, lift heights, speeds, and components.
Nissan forklift p frame - psd series service repair manualdufjdjskkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Nissan forklift p frame - pll series service repair manualufjjjsekkmdm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - psl series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides information on the structure and content of the manual, as well as safety instructions for working on the machines. Technical data and component specifications for the PLL and PSD models are also included.
Nissan forklift p frame - pll series service repair manualkksjefkksem
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psd series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - pll series service repair manualfjskekdmmse
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psl series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Allison transmission 4000 series generation controls vocational models 4500 s...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks and fluid/filter changes. Proper maintenance like regularly checking and changing the transmission fluid is important for safe and reliable operation.
Allison transmission 4000 series generation controls vocational models 4500 r...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It discusses the major components of the transmissions including the input module, torque converter, main housing, clutches, and control system. It provides warnings and cautions for working on the transmissions and outlines procedures for diagnosis, maintenance including fluid level checks and changes, and storage of the units. The document is technical in nature and aimed at transmission service technicians.
Allison transmission 4000 series generation controls vocational models 4500 h...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks, fluid and filter changes, and stall testing. The manual emphasizes the importance of following proper safety procedures and maintenance schedules to ensure safe and reliable operation of the transmissions.
Allison transmission 4000 series generation controls vocational models 4500 e...fjskekkwersmem
This document is the service manual for Allison Transmission's 4th generation vocational transmission models from 2005. It provides an introduction and overview of the transmission components and systems. It describes the major modules, unique features, model designations, exploded views, diagnostic procedures, storage and preservation methods, operating instructions, and specifications. It also contains important warnings and cautions for technicians serviding the transmissions.
Allison transmission 4000 series generation controls vocational models 4000 t...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks, fluid and filter changes, and stall testing. The manual emphasizes the importance of following safety procedures and maintaining proper transmission fluid levels and cleanliness.
Allison transmission 4000 series generation controls vocational models 4000 s...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks and fluid/filter changes. Proper maintenance like regularly checking and changing the transmission fluid is important for safe and reliable operation.
Allis chalmers models d 15, d-15 series ii tractor service repair manualfjskekkwersmem
This shop manual provides service information for Allis-Chalmers tractor models D-14, D-15, D-15 Series II, D-17, D-17 Series III, and D-17 Series IV. It describes the front system components, including both single and dual wheel tricycle configurations as well as adjustable and wide front axles. Procedures are provided for removing and servicing the front wheel assemblies, front forks or pedestals, and related components.
Partek sisu diesel engine 634 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these engine models.
Partek sisu diesel engine 620 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these diesel engines.
Partek sisu diesel engine 420 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these engine models.
Partek sisu diesel engine 320 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these engine models.
More Related Content
Similar to Nissan forklift p frame - psh series service repair manual
Nissan forklift p frame - ppc series service repair manualfhsjejfsekkkm
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information.
Nissan forklift p frame - ppc series service repair manualfjskekfmsmem
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on safety, designations, dimensions, specifications, maintenance preparations and troubleshooting procedures. The manual structure divides the truck into subsystems covered in tabs for relevant part information.
Nissan forklift p frame - ppd series service repair manualfjsekksmem
This document is a service manual for ATLET Low Picking Truck model PP*. It provides information on safety, technical specifications, components, and servicing instructions. Safety is the top priority when working on the truck. Always take proper precautions such as lifting the drive wheel, removing the battery plug, and locking the mast before starting any repairs. The manual is organized by subsystem and provides the necessary details for quick and correct service of the truck.
Nissan forklift p frame - ppf series service repair manualfjjsekkfksmem
The document is a service manual that provides technical data and service instructions for ATLET Low Picking Truck model PP*. It includes information on truck designations, dimensions, weights, specifications, safety instructions, and procedures for inspection, service, and troubleshooting. Diagrams illustrate permitted lifting points and dimensions. Tables provide data on truck types, lift heights, speeds, and components.
Nissan forklift p frame - psd series service repair manualdufjdjskkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Nissan forklift p frame - pll series service repair manualufjjjsekkmdm
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - psl series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides information on the structure and content of the manual, as well as safety instructions for working on the machines. Technical data and component specifications for the PLL and PSD models are also included.
Nissan forklift p frame - pll series service repair manualkksjefkksem
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psd series service repair manualufsikkdjskemds
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting electronics. Waste must be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - pll series service repair manualfjskekdmmse
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting all electronic units and the battery. Waste from repairs should be disposed of properly according to environmental regulations.
Nissan forklift p frame - psl series service repair manualudfjjsjekkemm
This document is a service manual for ATLET low lifters and stackers. It provides general information and technical data about the machines, including safety instructions, component specifications, recommended lubricants, and dimensions. It is intended to be used for correct service and repair of the trucks.
Similar to Nissan forklift p frame - psh series service repair manual (11)
Allison transmission 4000 series generation controls vocational models 4500 s...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks and fluid/filter changes. Proper maintenance like regularly checking and changing the transmission fluid is important for safe and reliable operation.
Allison transmission 4000 series generation controls vocational models 4500 r...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It discusses the major components of the transmissions including the input module, torque converter, main housing, clutches, and control system. It provides warnings and cautions for working on the transmissions and outlines procedures for diagnosis, maintenance including fluid level checks and changes, and storage of the units. The document is technical in nature and aimed at transmission service technicians.
Allison transmission 4000 series generation controls vocational models 4500 h...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks, fluid and filter changes, and stall testing. The manual emphasizes the importance of following proper safety procedures and maintenance schedules to ensure safe and reliable operation of the transmissions.
Allison transmission 4000 series generation controls vocational models 4500 e...fjskekkwersmem
This document is the service manual for Allison Transmission's 4th generation vocational transmission models from 2005. It provides an introduction and overview of the transmission components and systems. It describes the major modules, unique features, model designations, exploded views, diagnostic procedures, storage and preservation methods, operating instructions, and specifications. It also contains important warnings and cautions for technicians serviding the transmissions.
Allison transmission 4000 series generation controls vocational models 4000 t...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks, fluid and filter changes, and stall testing. The manual emphasizes the importance of following safety procedures and maintaining proper transmission fluid levels and cleanliness.
Allison transmission 4000 series generation controls vocational models 4000 s...fjskekkwersmem
This document is an excerpt from an Allison Transmission service manual providing information on the 4000 product family of transmissions. It includes warnings and cautions for technicians, an overview of transmission components, diagnostic procedures, and guidelines for preventative maintenance including fluid level checks and fluid/filter changes. Proper maintenance like regularly checking and changing the transmission fluid is important for safe and reliable operation.
Allis chalmers models d 15, d-15 series ii tractor service repair manualfjskekkwersmem
This shop manual provides service information for Allis-Chalmers tractor models D-14, D-15, D-15 Series II, D-17, D-17 Series III, and D-17 Series IV. It describes the front system components, including both single and dual wheel tricycle configurations as well as adjustable and wide front axles. Procedures are provided for removing and servicing the front wheel assemblies, front forks or pedestals, and related components.
Partek sisu diesel engine 634 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these engine models.
Partek sisu diesel engine 620 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these diesel engines.
Partek sisu diesel engine 420 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these engine models.
Partek sisu diesel engine 320 series service repair manualfjskekkwersmem
This document is a workshop manual that provides specifications, construction details, and work instructions for servicing SisuDiesel 320, 420, 620, and 634 engines. It includes sections on technical data for engine components, construction details of the engine systems, and step-by-step instructions for tasks like removing the cylinder head, changing the camshaft bushings, and fitting new cylinder liners. The manual is intended as a guide for mechanics servicing these engine models.
Nissan forklift p frame - psl series service repair manualfjskekkwersmem
This document is a service manual for ATLET low lifters and stackers. It provides information on the structure and content of the manual, as well as safety instructions for working on the machines. Technical data and component specifications for the PLL and PSD models are also included.
Nissan forklift p frame - psd series service repair manualfjskekkwersmem
This document is a service manual for ATLET low lifters and stackers. It provides general safety instructions, technical specifications, dimensions, component details, and recommended lubricants. Permitted lifting points on the machines are marked with decals. Welding should only be done after disconnecting batteries and electronic units. Waste should be disposed of properly according to environmental regulations. The manual structure divides the machines into subsystems for easy reference to repair procedures.
Nissan forklift p frame - ps series service repair manualfjskekkwersmem
The document is a service manual for ATLET stackers and provides information about:
1) Safety instructions for working on the trucks, including lifting points and procedures.
2) Technical data and specifications for truck components like the traction motor, gearbox, hydraulic system and control system.
3) Recommended oils, greases and other incidental materials for maintenance and service.
Daewoo doosan dx340 lc 3, dx350lc-3 excavator service repair manual serial nu...fjskekkwersmem
This document provides maintenance instructions for track assemblies on various Doosan excavator models. It describes the components of the track assembly and procedures for inspecting, cleaning, adjusting track tension, and checking wear limits. Track tension is checked by measuring the distance between the track and frame, which should be 90-110mm under normal conditions and up to 370mm in muddy conditions. Tension is adjusted via grease fittings on the track tension cylinders. Wear limits and tolerances are provided for track links, rollers, and other components to determine when repair or replacement is needed. Safety precautions are outlined, including blocking the machine securely during inspection and adjusting pressure slowly when adjusting tension.
Daewoo doosan dx300 lca excavator service repair manual (serial number 5001 a...fjskekkwersmem
1) The swing reduction gear reduces the swing motor RPM to increase output torque for efficient work cycling with adequate power.
2) It is a two-stage planetary gearbox with two planet gears, two sun gears, and a two-stage output reduction engaging the ring gear.
3) To remove it, drain oil, disconnect hoses and lines, remove bolts holding it to the frame, and lift it out as an assembly with the swing motor. Proper cleaning, inspection, and reinstallation is required for maintenance.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 50001 ...fjskekkwersmem
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning emphasizing the need to read all manuals fully and follow warnings and instructions for safe operation and maintenance. An overview of the engine section describes the main engine components. Procedures for replacing or removing the entire engine are also provided.
Daewoo doosan dx300 lc 5 excavator service repair manual serial number 1001 a...fjskekkwersmem
This document provides a summary of maintenance instructions for key components of a Doosan DX300LC-5 excavator. It includes sections on safety, specifications, general maintenance, the engine, upper structure, lower structure and chassis, front attachment, hydraulic and electrical systems, and optional equipment. Safety instructions are provided at the beginning emphasizing the need to read all manuals fully and follow warnings and instructions for safe operation and maintenance. An overview of the engine section describes the main engine components. Procedures for replacing or removing the entire engine are also provided.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 50001 ...fjskekkwersmem
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Daewoo doosan dx255 lc 3 excavator service repair manual serial number 1001 a...fjskekkwersmem
The document provides maintenance instructions for track assemblies on excavators. It describes the major components of the track assembly and instructions for checking and adjusting track tension. Track tension should be checked by measuring the distance between the bottom of the frame and the top of the track links and adjusting as needed based on terrain conditions. Wear limits and tolerances are provided for inspection and replacement of track components. Safety precautions are outlined when working on or adjusting the track assembly.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Nissan forklift p frame - psh series service repair manual
1. SERVICE MANUAL
Truck: PS PSH
Manual No: 119029
SERVICEMANUAL
Edition 2008B
1 General information and technical data
Service manual scope ................................................................................................... 1.3
General ................................................................................................................ 1.3
Scope of P series ................................................................................................ 1.3
How to use the manual .................................................................................................. 1.4
Structure .............................................................................................................. 1.4
Symbol key .......................................................................................................... 1.4
Safety instructions ......................................................................................................... 1.5
General ................................................................................................................ 1.5
Lifting the truck .................................................................................................... 1.6
Inspection/Preparations .................................................................................................. 1.6
Permitted lifting points .................................................................................................... 1.7
Welding of truck ................................................................................................... 1.7
Gas springs ......................................................................................................... 1.8
Atlet cares about the environment ....................................................................... 1.8
Environmental impact .......................................................................................... 1.8
Waste .................................................................................................................. 1.8
Preparations ................................................................................................................... 1.9
Service ................................................................................................................. 1.9
Troubleshooting ................................................................................................... 1.9
Data ................................................................................................................................ 1.10
Designations ...................................................................................................... 1.10
Truck designation ......................................................................................................... 1.10
Type designation .......................................................................................................... 1.11
Dimensions and weights .................................................................................... 1.14
Component specifications ................................................................................. 1.15
Recommended incidental material ............................................................................. 1.16
2. SERVICEMANUAL
1.2
Oil and grease ....................................................................................................1.16
Standards and abbreviations .......................................................................................1.17
Screws ...............................................................................................................1.17
Tightening torque, bolts and nuts ................................................................................ 1.17
Tightening torque for hydraulic connections ................................................................. 1.18
Conversion tables ......................................................................................................... 1.18
Standard abbreviations ......................................................................................1.19
Bolt types and tensile grades ....................................................................................... 1.20
Colour of truck ....................................................................................................1.21
Colour codes cabling .........................................................................................1.21
Designations ......................................................................................................1.22
3. General information and technical data / Service manual scope / General 1.3
SERVICEMANUAL
SM_PS_01_119028_2008B.fm
Edition 2008B
1 General information and technical data
Service manual scope
General
This manual describes the service procedure for ATLET stackers. Use the manual for
quick and correct service.
You may find inconsistencies in the manual compared to the models supplied due to
optional designs, upgrades and the like.
Warning!
If the truck is rebuilt after delivery or supplemented in such a manner that safety
may be compromised, ATLET or its authorised representative must be contacted.
Any modifications to the truck are only permitted by authorised personnel. Only in cases
where a truck manufacturer is no longer a going concern and where no other company
has taken over the operations of said truck manufacturer may the user change or modify
the truck, and then only providing the user:
• Arranges that the modification or change is designed, tested and implemented by
one or more industrial truck experts, and includes the safety aspect.
• Prepares and keeps permanent documentation covering design, tests and
implementation of the modification or change.
• Approves and makes appropriate changes to identification plate, decals, markings
and in the instruction manuals.
• Attaches a permanent and clearly visible sign or similar that details the way in
which the truck has been modified or changed together with the date of the
modification or change and the name and address of the organisation that carried
out the task.
The content of this service manual is protected by copyright law and may not be copied,
fully or in part, without written permission. The material has undergone careful
examination with regard to correctness. We reserve the right to make alterations. In the
event of contradictory information in the Swedish and translated versions, the Swedish
edition takes precedence.
Modifications and updates will be distributed via ATLET AB Service Manual Change.
Scope of P series
The manual cover the PS and PSH stackers that are included in the P series of stackers
and low lifters.
4. 1.4 General information and technical data / How to use the manual / Structure
SERVICEMANUAL
How to use the manual
Structure
The manual is arranged according to the same principles as ATLET's spare part
catalogues, with the truck divided into one subsystem per tab.
Tabs 1 - 3 in this manual contain comprehensive information regarding technical data,
service instructions and tools.
Tabs 4-12 in the manual contain information limited to a specific part of the truck dealing
with the mechanical operation of the various components, for example, Masts (tab 6) and
Hydraulic System (tab 8).
The software is described under tab 10 “Electrical System” .
The main principle for extra accessories is to place them under the relevant tab.
Otherwise they are placed under tab 12 “Miscellaneous”. For this reason tab 12 is not
always included in the Service Manual.
For specific problems and information about procedures, look in the main index for the
correct section in the manual
Symbol key
Warning!
Indicates risk of personal injury.
Important!
Indicates risk of damage to truck.
Note!
Indicates general observations.
5. General information and technical data / Safety instructions / General 1.5
SERVICEMANUAL
Safety instructions
General
Extreme importance must be placed on precautionary measures to avoid accidents during
all work on the vehicle.
A general rule is always to implement preventive measures that are adapted to the type
of vehicle to be worked on. The general rules below must always be observed:
• Smoking or naked flames are strictly forbidden as there is a risk of explosion in the
vicinity of batteries and while working on gas equipped vehicles.
• The battery should always be protected during grinding work.
• Local fire regulations should be observed
• Always lift the drive wheel free from the floor during service work to prevent the
vehicle from moving.
• Remove the battery plug before working on the electrical system. The battery plug
may only be connected while troubleshooting, and when the greatest of care is
exercised, (with the truck raised).
• In order to avoid crushing injuries, always remove the battery plug when working
on or around masts and hydraulic units. The mast or hydraulic unit may be actuated
due to an electrical fault or a mistake while working.
Warning!
Having live current connected to the truck when working on and around the mast
can be fatal!
• When working on and around the lifting device and hydraulic unit, they must be
locked by using the mast lock, wooden blocks or some other appropriate means.
• No other persons should be in the vicinity of the truck when it is test run in
conjunction with repair work, in view of the risk of accidents or near-accidents
from the truck making an unexpected manoeuvre.
• The system should not be pressurised, e.g. the pump motor shut off and the forks in
lowest position, when dismantling parts of the hydraulic system.
6. 1.6 General information and technical data / Safety instructions / Lifting the truck
SERVICEMANUAL
• If the forks need to be released in emergency situations such as short circuits, push
the emergency release valve on the hydraulic unit, see Figure 1.1.
• Remove all metal objects such as watches, chains, glasses and rings when working
on the electrical system, or in its immediate vicinity. A short-circuit from such
objects may result in serious burn injuries.
Lifting the truck
Inspection/Preparations
• When the truck is lifted using a jack, make sure you secure it with blocks. The
truck must not rest on the jack while work is carried out.
• Ensure that straps, wires or chains have a sufficient lifting capacity before lifting
the truck.
• Ensure that the drive wheel runs free of the floor before troubleshooting the
electrics.
Figure 1.1 Emergency release valve on hydraulic unit
PS PSH
24 V
7. General information and technical data / Safety instructions / Welding of truck 1.7
SERVICEMANUAL
Permitted lifting points
Figure 1.2 shows where the permitted lifting points are located on the truck. The lifting
points are marked with a decal representing a lifting hook.
Warning!
Never lift the truck using points other than those specified.
Welding of truck
• For welding work, always disconnect the battery plug along with all connections to
controllers and regulators (applies to all electronic units). Following completion of
the welding work, connect all connectors to the electronic units first, followed by
the battery plug to the battery.
• Always connect the return current clamp as close to the welding area as possible to
eliminate damage to surrounding components.
Figure 1.2 Permitted lifting points
PS PSH
8. 1.8 General information and technical data / Safety instructions / Gas springs
SERVICEMANUAL
Gas springs
Warning!
During service and preventive maintenance it is important to check that the tiller
arm is raised up automatically when the driver releases it. If this does not happen it
should be reported to the truck supervisor, with the recommendation that the truck
be taken out of service until the requisite measures have been implemented.
Warning!
Observe the utmost caution when dismantling the gas springs.
1. Make sure that no other persons are in the vicinity or in the lengthwise direction
of the gas spring.
2. Stand to the side of the gas spring when removing.
3. Never point the gas spring at any person or part of the body.
Atlet cares about the environment
The majority of our products consist of metal, and can be fully recycled.
Environmental impact
All products have an impact on the environment throughout their entire life cycle.
The consumption of energy during their use is one of the most important factors that
influences the environment.
Through correct care, maintenance and use, the consumption of energy can be reduced,
thereby alleviating the environmental impact.
Waste
Waste material in conjunction with repairs, maintenance, cleaning, or scrapping, must be
collected and disposed of in an environment-friendly way and in accordance with the
directives of the relevant country. Only carry out this type of work in areas intended for
this purpose.
Recyclable material should be taken care of by specialists.
Environmentally hazardous waste, such as oil filters, batteries and electronics, can have
a negative effect on the environment, or health, if handled incorrectly.
9. General information and technical data / Preparations / Service 1.9
SERVICEMANUAL
Preparations
Service
• Go through all safety instructions
• Make sure that you have all the essential tools close at hand before starting work.
• Before disconnecting cabling or other electrical components, check the colour
codes and check for damage to cables or connections.
• When complex components are repaired and dismantled, work methodically to
avoid the risk of mixing component parts.
• When repairing or maintaining sensitive components, make sure that you use clean
tools and work on a clean work surface.
• Dismantle, inspect and adjust components according to the prescribed routines.
See relevant tab for detailed information.
Troubleshooting
When you suspect a faulty component, do not replace it immediately. Start by checking
the surrounding equipment and then run a complete troubleshooting procedure as
specified in the trouble shooting chart. Make sure you know the reason for the fault
before replacing a component.
10. 1.10 General information and technical data / Data / Designations
SERVICEMANUAL
Data
Designations
Truck designation
Explanation of model designation
Table 1.1 Truck designations
Truck type Type Load capacity
PS 125 Stacker 1250 kg
PSH 160 Pedestrian stacker 1600 kg
PSH 200 Pedestrian stacker 2000 kg
Example: PS 125 TV 299 = liftheight [cm]
Truck type
Load capacity * 10 [kg]
Mast type
Mast lift height [cm]
11. General information and technical data / Data / Designations 1.11
SERVICEMANUAL
Type designation
1. Model designation.
2. Type Serial No./Version (S=Special design)
3. Year of manufacture, week and guarantee limit in months
(providing that the service instructions in the warranty are observed).
4. Any load restrictions due to the positioning of the load on the forks (D) and/or
lifting height (Q).
Figure 1.3 Example of identification plate (–2006w36)
1
2
3
4
DD HH
QQ
ATLET OBERHAUSEN
H D QH D Q
MODELL
MODEL
MODELL
MODELE
SERIE NR.
SERIAL NO.
SERIEN NR.
NOMERO DESERIE
TILLV. ÅR
YEAR OF MANUF.
BAUJAHR
AN DE FABR
TILLÅTEN LAST
ACTUAL CAPACITY
WIRKLICHE TRAGFÄHIGKEIT
CAPACITE EFFECTIVE
LYFTHÖJD
LIFTHEIGHT
HUBHÖHE
HAUTEUR DE LEVEE
TYNGDPUNKTSAVSTÅND
BATTERISPÄNNING
BATTERY VOLTAGE
BATTERIESPANNUNG
TENSION DE LA BATTERIE
VIKT UTAN BATTERI
WEIGHT WITHOUT BATTERY
GEWICHT OHNE BATTERIE
MASSE SANS BATTERIE
MINSTA BATTERIVIKT
MINIMUM BATTERY WEIGHT
MINDESTGEWICHT DER BATTERIE
MASSE MINIMAL DE LA BATTERIE
MAXIMAL BATTERIVIKT
MAXIMUM BATTERY WEIGHT
HÖCHSTGEWICHT DER BATTERIE
MASSE MAXIMAL DE LA BATTERIE
LOAD CENTRE DISTANCE
LASTSCHWERPUNKT
DISTANCE DE CENTRE
MMMM MMMM KGKG
KG
VOLT-DC
KG
KG
160 SDTFV 800 A
A 10568/01 S
2003w01-6
8000
3600
600
500
1600
1000
24
1150
370
540
12. 1.12 General information and technical data / Data / Designations
SERVICEMANUAL
1. Model designation.
2. Type Serial No./Version (S=Special design)
3. Year of manufacture, week and guarantee limit in months
(providing that the service instructions in the warranty are observed).
4. Any load restrictions due to the positioning of the load on the forks (D) and/or
lifting height (Q).
Note!
In cases where the machine plate has been lost or become illegible, it must be re-
newed immediately. In order to identify the machine's serial number, there is a plate
located on each main component such as drive motor, gearbox, hydraulic unit,
Figure 1.4 Example of identification plate (2006w37–)
Model
Modell
Serial no.
Serie nr.
Year of manufacturing
Tillverkningsår
Weight without battery
Vikt utan batteri
Battery weight min.
Batterivikt min.
Battery weight max.
Batterivikt max.
Battery voltage
Batterispänning
Refernce number
Referensnummer
ATLET AB MÖLNLYCKE SWEDEN
H (mm)
H
XXXXXXXX
Q (kg)D (mm)
D
Q
1
2
3
4
13. General information and technical data / Data / Designations 1.13
SERVICEMANUAL
TMC etc. For some machines there is even a plate attached inside the battery com-
partment, or serial number punched on the side of the mast.
Figure 1.5 Example of plate with serial number.
SER XXXXXX
WEEK XXXX
SER XXXXXX
WEEK XXXX
14. 1.14 General information and technical data / Data / Dimensions and weights
SERVICEMANUAL
Dimensions and weights
Dimension designations
Figure 1.6 Positions for dimension designations
R2
a/2 a/2
LB
V
B1
LL
L1
L2
Ast
L
L3
1443.2
h1
h2
h3
h4
15. General information and technical data / Data / Component specifications 1.15
SERVICEMANUAL
Component specifications
Table 1.2 Component specifications
Component Specification PS 125 PSH 160/200
Traction motor Drive voltage 24V 24V
Output standard 1.1 kW
60 min
1.1 kW
60 min
Insulation resistance 25 MΩ 25 MΩ
Gearbox ZF Gear ratio (standard) 28.0:1 28.0:1
Oil volume 1.5 litre 1.5 litre
Hydraulic system Max pressure 150-160 bar 150-160 bar
Oil volume max 6.00 litre max 12.00 litre
Hydraulic unit (motor
& pump)
Output 2.2 kW 3.0 kW
Control system for
traction motor
Type FZ2009 AC0 CAN AC0 CAN
Voltage 24 V 24 V
Max current 150A (RMS)
in 2 min
150A (RMS)
in 2 min
Fuses Operating fuse 7.5 A (1 pc) 7.5 A (1 pc)
Pump motor fuse 80 A (1 pc) 80 A (1 pc)
Traction motor fuse 100 A (1 st) 100 A (1 st)
16. 1.16 General information and technical data / Recommended incidental material / Oil and grease
SERVICEMANUAL
Recommended incidental material
Oil and grease
Important!
Do not mix different lubricants, particularly synthetic oil with mineral oil as this can
affect the properties of the oil!
Table 1.3 Recommended oil and grease table
Brand Gearbox oil
As per API grade
GL-5
Hydraulic oil
As per ISO VG 32, VG 15
Bearing
grease
NLGI 2
Lithium
baseNormal Cold store Normal
(32)
Cold store
(15)
BP BP Energear
HYPO
80W-90
BP Energear
SHX
75W-90
BP Bartran
HV-32
BP Bartran
SHF-S
BP
Energrease
LC 2
Castrol - - Hyspin
SHS 32
Hydraulic oil
OM 15
Alt: Hyspin
AWH 15
LMx
Mobil - - DTE 13 M
SHS 32
Flowrex 1 Mobilplex 48
Shell - - Tellus oil
TX 32
Tellus oil T
15
Retinax EP2
Statoil /
Exxon
- - SHS 32 J 26 Uniway
LIX 625
Texaco - - Rando oil
HDZ 32
Rando oil
HDZ 15
Hytex EP2
17. General information and technical data / Standards and abbreviations / Screws 1.17
SERVICEMANUAL
Standards and abbreviations
Screws
Tightening torque, bolts and nuts
The tightening torques in the table above are standard values. In some cases a specific
tightening torque is specified in the relevant sections. If no tightening torque is specified
in the service instructions, the values shown in the table above apply.
Table 1.4 Tightening torque, bolts and nuts
DIM Tensile grade
4.6 8.8 10.9 12.9
Nm Nm Nm Nm
M4 1.1 2.9 4.0 4.9
M5 2.2 5.7 8.1 9.7
M6 3.7 9.8 14 17
M8 8.9 24 33 40
M10 17 47 65 79
M12 30 81 114 136
M14 48 128 181 217
M16 74 197 277 333
M18 103 275 386 463
M20 144 385 541 649
18. 1.18 General information and technical data / Standards and abbreviations / Screws
SERVICEMANUAL
Tightening torque for hydraulic connections
Conversion tables
Table 1.5 Tightening torque for hydraulic connections
Tightening torque: Pipe thread / metric threads:
Metric fine
thread
Whitworth pipe
thread
MA (Nm) with
ring
MA (Nm) with elastic (O
ring coupling)
M10 x 1 G 1/8" 25 10
M12 x 1.5 30 20
M14 x 1.5 G 1/4" 50 30
M16 x 1.5 G 3/8" 80 35
M18 x 1.5 90 40
M20 x 1.5 G 1/2" 130 50
M22 x 1.5 150 60
M26 x 1.5 250 70
M27 x 1.5 G 3/4" 250 80
M27 x 2 250 90
G 1" 350 140
M33 x 2 400 140
M42 x 2 G 11/4" 600 240
M48 x 2 G 11/2" 800 300
Table 1.6 Conversion table, torque units
Newton metre
(Nm)
Kilopond metre
(kpm)
Pound force inch
(lbg x in)
Pound force foot
(lbf x ft)
1 0.10 8.85 0.74
9.81 1 86.80 7.23
0.11 0.01 1 0.08
1.36 0.14 12.00 1
Table 1.7 Conversion table, pressure units
Pa
(N/m2)
Bar
(1mb=1hPa)
at
(kp/cm2)
dry
(mm Hg, 0 C)
atm
1 10 -5 1.020*10 -5 7.501*10 -3 9.869*10 -6
9.807*10 4 0.9807 1 735.6 0.9678
19. General information and technical data / Standards and abbreviations / Standard abbreviations
SERVICEMANUAL
Standard abbreviations
133.3 1.333*10 -3 1.360*10 -3 1 1.316*10 -3
1.013*10 5 1.013 1.033 760 1
Table 1.8 Conversion, table speed
m/s km/h
1 3.6
0.278 1
Table 1.9 Standard abbreviations
Magnitude Unit Designation
Current Ampere A
Voltage Volt V
Resistance Ohm Ω
Output Watt W
Torque Newton metre Nm
Pressure Pascal Pa
Table 1.7 Conversion table, pressure units
Pa
(N/m2)
Bar
(1mb=1hPa)
at
(kp/cm2)
dry
(mm Hg, 0 C)
atm
20. 1.20 General information and technical data / Standards and abbreviations / Standard abbreviations
SERVICEMANUAL
Bolt types and tensile grades
Marking with the manufacturer's trademark, including the tensile grade, is compulsory
for bolts with a thread diameter from 5mm and in tensile grades according to the table
above. Marking only takes place when the shape of the product permits this.
Table 1.10
Figure Screw type Designation Tensile grade
M6S Hexagon screw 8.8
10.9
MC6S Hexagon hole screw 8.8
10.9
12.9
MF6S Hexagon hole screw,
countersunk
10.9
MCS Slotted screw 4.6
MVBF Oval head screw,
countersunk
4.6
Figure 1.7 Example of marking
8.8
12.9
12.9
8.8
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. General information and technical data / Standards and abbreviations / Colour of truck 1.21
SERVICEMANUAL
Colour of truck
0
The truck is painted in colours with the following NCS colour designations:
Colour codes cabling
The colour coding for all the cables included in the truck are shown in Atlet's wiring
diagram. The abbreviations have the following meanings:
Note!
Two-colour cables are shown with both colour codes separated by a slash.
E.g. Blue and yellow cable is shown with colour code BL/Y.
Table 1.11 NCS colour designations
Truck colour Designation
Yellow NCS 0070-Y20R
Medium grey NCS 7000
Dark grey NCS 8000
Table 1.12 Colour codes for Atlet's wiring diagrams
Code Cable colour
Y Yellow
BL Blue
SB Black
W White
GN Green
GR Grey
R Red
BN Brown
VO Violet
P Pink
OR Orange
23. 1.22 General information and technical data / Standards and abbreviations / Designations
SERVICEMANUAL
Designations
Electric components usually have a designation of two letters:
Table 1.13 First letter
Code Designation
A Component or function without its
own letter in the list
C Capacitor
D/V Diode
E Electrical component
F Fuse
I Indicator
K Connector
L Coil/inductive element
M Motor
P/X Connection
R Resistor
S Switch
T Terminal
Y Valve/brake
H Audible warning unit/light
G Battery
Table 1.14 Second letter
Code Designation
B Brake
C Control system
E Emergency function
F Forward
H Hour
K Key
L Lowering
M Manoeuvre
P Pump
R Reverse
S Speed