This document is a service manual for New Holland construction equipment models C227, C232, C238, L213, L215, L218, L220, L223, L225, and L230. It contains instructions for testing and installing the primary hydraulic pump. The test procedure involves using a flowmeter to measure pump output at various pressures and engine speeds. Installation involves aligning the pump splines with the coupling and securing it with bolts using Loctite.
Jcb tm320 tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 wm tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying machines using identification and component plates, which contain serial numbers. It also details two types of fasteners used - zinc plated and Dacromet. Tables are included specifying torque settings for UNF and metric grade fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 s tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the type of fastener and not mix zinc and Dacromet components.
This document is the service manual for JCB Drivetrain Systems Ltd's SD 70/PT axles. It provides general information, safety guidelines, routine maintenance procedures, and technical specifications. The manual is organized into sections covering hydraulics, axles, brakes, and other components. It includes lists of torque specifications and recommended service tools. Updates to the manual are documented, with changes noted for each issue.
Jcb sd55 3 piece axles service repair manualiekkdmmem
This document is a service manual for JCB drivetrain systems that provides general information and safety instructions. It contains sections covering general information, care and safety, routine maintenance, hydraulics, axles, and brakes. The care and safety section emphasizes that safety must come first when performing any maintenance or repair work. It contains warnings about operating, maintenance, and general safety. Technicians are expected to follow all safety procedures and replace any worn components.
This manual provides information on routine maintenance and repair of JCB drivetrain axles. It outlines procedures for identifying axles by their serial number plate and build identification. The document instructs technicians to use correct replacement parts, renew all seals and gaskets during reassembly, and lubricate components properly. Technicians are advised to quote the full serial number when ordering parts to ensure the correct components for the specific axle build.
This service manual provides information on routine maintenance and repairs for JCB drivetrain systems axles. It details procedures for identifying axles by their serial plate numbers and build identifications. The manual instructs technicians to use correct replacement parts, renew all seals and gaskets during reassembly, and lubricate components properly. Technicians are advised to quote full serial numbers when ordering parts to ensure the correct components are obtained.
Jcb tm320 tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 wm tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying machines using identification and component plates, which contain serial numbers. It also details two types of fasteners used - zinc plated and Dacromet. Tables are included specifying torque settings for UNF and metric grade fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 s tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the fastener type.
Jcb tm310 tier3 telescopic wheeled loader service repair manualiekkdmmem
This document provides information about identifying JCB machines and their components, as well as torque settings for fasteners. It describes identifying the machine using the identification plate and serial numbers stamped on major components. It also explains how to identify the type of fastener (zinc plated or Dacromet) by their color and part number suffix. Tables with torque settings are provided for UNF Grade 'S' and metric Grade 8.8 fasteners under lubricated and unlubricated conditions. Instructions are given to only use the relevant torque settings for the type of fastener and not mix zinc and Dacromet components.
This document is the service manual for JCB Drivetrain Systems Ltd's SD 70/PT axles. It provides general information, safety guidelines, routine maintenance procedures, and technical specifications. The manual is organized into sections covering hydraulics, axles, brakes, and other components. It includes lists of torque specifications and recommended service tools. Updates to the manual are documented, with changes noted for each issue.
Jcb sd55 3 piece axles service repair manualiekkdmmem
This document is a service manual for JCB drivetrain systems that provides general information and safety instructions. It contains sections covering general information, care and safety, routine maintenance, hydraulics, axles, and brakes. The care and safety section emphasizes that safety must come first when performing any maintenance or repair work. It contains warnings about operating, maintenance, and general safety. Technicians are expected to follow all safety procedures and replace any worn components.
This manual provides information on routine maintenance and repair of JCB drivetrain axles. It outlines procedures for identifying axles by their serial number plate and build identification. The document instructs technicians to use correct replacement parts, renew all seals and gaskets during reassembly, and lubricate components properly. Technicians are advised to quote the full serial number when ordering parts to ensure the correct components for the specific axle build.
This service manual provides information on routine maintenance and repairs for JCB drivetrain systems axles. It details procedures for identifying axles by their serial plate numbers and build identifications. The manual instructs technicians to use correct replacement parts, renew all seals and gaskets during reassembly, and lubricate components properly. Technicians are advised to quote full serial numbers when ordering parts to ensure the correct components are obtained.
Jcb jz140 tier 3 isuzu tracked excavator service repair manual from 1789429 t...iekkdmmem
This document contains safety notices and warnings for operating heavy machinery. It lists general safety practices such as wearing proper protective equipment, not operating under the influence of drugs or alcohol, and being aware of hazards in the work area. It also provides warnings specific to machine operation, such as not exceeding design limits, avoiding sparks in hazardous atmospheres, and keeping hands and feet inside the vehicle while it is moving. The document emphasizes that safety is the operator's responsibility and failing to follow safety practices could result in injury or death.
Jcb jz140 tier 3 isuzu tracked excavator service repair manual from 1390000 t...iekkdmmem
This document contains a safety checklist for operating heavy machinery. It lists many potential hazards and provides warnings about how to avoid injuries. Operators are instructed to always be careful and alert, wear proper protective clothing, avoid distractions, inspect work sites for hazards, communicate clearly with others, and never operate faulty or modified equipment. Specific dangers highlighted include being struck by moving parts, electrocution from power lines, explosions in hazardous atmospheres, and falls from unsecured work platforms. The checklist emphasizes practicing new tasks safely and following all applicable regulations and manuals.
Jcb js290 tier iii auto tracked excavator service repair manual sn 01421200...iekkdmmem
This document provides torque settings for fasteners used on JCB machines. It discusses zinc plated, Dacromet plated, and yellow plated fasteners. Dacromet fasteners have a silver mottled appearance and lower torque settings than zinc or yellow plated fasteners. Tables are provided with torque settings for UNF and metric fasteners under lubricated and unlubricated conditions. The settings are intended for use when specific torque values are not provided elsewhere in the manual.
The document is a technical manual that provides instructions and specifications for repairing N Series engines that comply with EU/2002/88/CE regulations. It contains sections on general specifications, fuel systems, applications, overhaul procedures, required tools, and safety precautions. The sections are numbered and provide information on topics like specifications, torque values, tool lists, repair procedures, and maintenance schedules. Symbols are used to classify warnings and service operations. Conversion tables are provided for units of measurement. The manual must be followed closely to safely and properly repair the engines.
Hyundai r170 w 9 wheel excavator service repair manualiekkdmmem
Here are the key steps to disassemble the transmission based on the information provided:
1. Drain the transmission oil through the screw plug into a suitable collector.
2. Remove the lube oil pump, downshift interlock, speed transmitter, bleeder, compression spring and ball.
3. Remove the threaded element with O-ring from the bore.
4. Remove the lubrication nipple, screw plugs, and bleeder valve.
5. Loosen the bolt connection of the input housing equally as it is subject to a cup spring.
Hyundai r160 lc 7a crawler excavator service repair manualiekkdmmem
This section provides instructions for removing and installing the boom, arm, and bucket cylinders on the excavator. The key steps are:
1. Fully extend the arm and bucket, lower the work equipment to the ground, and stop the engine before removal. Relieve hydraulic pressure.
2. Disconnect hydraulic hoses and greasing lines, and secure pins and rods to prevent parts from falling during removal.
3. Remove mounting pins and bolts, then sling and remove cylinder assemblies.
4. Installation is the reverse of removal. Bleed air from cylinders after installing. Check hydraulic oil level and for leaks.
Hyundai r140 w 7a wheel excavator service repair manualiekkdmmem
This document contains sections related to the service manual of an excavator. Section 1 provides general safety hints and specifications. Section 2 describes the structure and function of components such as the pump device, control valve, swing device, and transmission. Section 3 covers the hydraulic system including circuits. Section 4 details the electrical system components and circuits. Section 5 outlines the mechatronics systems. Section 6 is about troubleshooting. Section 7 includes maintenance standards. Section 8 provides instructions for disassembly and assembly of components. Section 9 lists component mounting torques.
Hyundai r55 w 7 wheel excavator service repair manualiekkdmmem
1. Remove the cover and O-ring from the geared pump section.
2. Remove the springs and spring seat from the main pump section.
3. Remove the rotary group, shaft, hanger, bearing and cover from the main pump section.
4. Remove the control piston by taking out its mounting bolts.
Hyundai r36 n 7 mini excavator service repair manualiekkdmmem
This service manual provides instructions for maintaining a hydraulic excavator. It outlines the machine's components and systems, including the engine, pumps, controls, hydraulics, undercarriage, and electrical equipment. The manual describes inspection and maintenance procedures organized by service intervals. Technicians should follow the procedures to properly service the excavator, replace worn parts, and troubleshoot any issues. Maintaining the machine according to this manual will help ensure long life and prevent failures and problems.
Hyundai hb100 backhoe loader service repair manualiekkdmmem
This document contains sections on safety, specifications, operational checks, engine systems, power train systems, brake systems, steering systems, work equipment, electrical systems, and troubleshooting guides for various components. It provides information on component locations, electrical circuits, monitoring systems, switch specifications, and testing and adjustment procedures. The sections cover the structure and function of components, operational checks and troubleshooting, tests and adjustments, and disassembly and reassembly instructions.
New holland w130 wheel loader service repair manualiekkdmmem
This document provides instructions for removing and installing the engine and radiator on a CNH America LLC W110 and W130 Wheel Loader. The steps include: parking the machine safely, disconnecting electrical and hydraulic systems, attaching lifting equipment to the engine compartment, and removing hoses, lines, and mounting hardware to separate the engine from the loader frame. Reinstallation involves reversing these steps and reconnecting all components.
New holland tt75 tier3 engine, 2 wd tractor service repair manualiekkdmmem
The document is a service manual for tractor models TT55, TT65, and TT75. It contains safety information and instructions for servicing various tractor systems, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, and electrical systems. The manual provides part numbers and diagrams to aid technicians in maintenance and repairs. Safety is emphasized throughout, warning technicians to follow procedures, wear protective equipment, and avoid hazards like operating machinery with the engine running.
New holland ts135 a tractor service repair manualiekkdmmem
This document is a service manual for New Holland TS100A, TS110A, TS115A, TS125A, TS130A, and TS135A tractors. It provides instructions and specifications for separating the front axle and front support from the engine on these tractor models. The summary includes torque values for fasteners, lists any special tools required, and provides a step-by-step procedure for separating the front axle and support. Health and safety warnings and environmental considerations are also addressed at the beginning.
New holland tk4040 tractor service repair manualiekkdmmem
This document is a service manual for tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. It contains introduction sections on safety rules, basic instructions, and consumables to be used during service. The bulk of the manual provides technical content on the engine, clutch, transmission, rear axle system, power take-off, brakes and controls, hydraulic systems, steering clutches, tracks and track suspension, electrical systems, and the platform, cab, and bodywork of the tractors.
New holland tk80 ma tractor service repair manualiekkdmmem
This document is a repair manual for CNH America LLC tractor models TK75VA, TK80A, TK80MA, TK90A, TK90MA, and TK100A. It contains sections covering the engine, clutch, transmissions, rear mechanical drive, braking system, hydraulic systems, steering clutches, suspension and tracks, and electrical system. The document provides general safety and handling instructions for working on and operating the tractors, and warns that all maintenance and repairs should only be performed by authorized technicians according to the instructions. It also contains lubrication charts and emissions warranty information.
New holland td90 tractor service repair manualiekkdmmem
This document is the service manual for TD60-TD95 straddle mount model tractors. It contains sections on general information, the engine system, clutches, mechanical transmission (12x4), reverser (12x12) and other systems. Each section provides specifications, views, removal/installation instructions, and troubleshooting information for the components in that system. The manual is intended to guide service technicians in repairing and maintaining these tractors.
New holland t8.420 (cvt) tractor service repair manualiekkdmmem
This document is a service manual that provides information on servicing and repairing various systems for tractor models T8.275, T8.300, T8.330, T8.360, T8.390, and T8.420, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. The manual contains safety instructions, torque specifications, fluid capacities and provides section references to detailed information on troubleshooting and repairing individual tractor systems.
New holland t8.380 smart trax continuously variable transmission (cvt) tracto...iekkdmmem
The document is a service manual that provides maintenance instructions for engine components of various tractor models. It includes sections on the engine and crankcase, cylinder heads, air cleaners and lines, fuel filters, fuel tanks, fuel injection system, engine lubrication system, aftercooler, engine cooling system, fan and drive, and selective catalytic reduction exhaust treatment. Each section provides detailed instructions, specifications, and diagrams for servicing the corresponding component.
New holland t8.380 continuously variable transmission (cvt) tractor service r...iekkdmmem
The document is a service manual that provides specifications and repair instructions for engines and other components of tractor models T8.320, T8.350, T8.380, T8.410, and T8.435. It contains sections on the engine and crankcase, cylinder heads, air/fuel systems, lubrication systems, cooling systems, and electrical systems. Repair procedures are listed by component and illustrated with diagrams.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Jcb jz140 tier 3 isuzu tracked excavator service repair manual from 1789429 t...iekkdmmem
This document contains safety notices and warnings for operating heavy machinery. It lists general safety practices such as wearing proper protective equipment, not operating under the influence of drugs or alcohol, and being aware of hazards in the work area. It also provides warnings specific to machine operation, such as not exceeding design limits, avoiding sparks in hazardous atmospheres, and keeping hands and feet inside the vehicle while it is moving. The document emphasizes that safety is the operator's responsibility and failing to follow safety practices could result in injury or death.
Jcb jz140 tier 3 isuzu tracked excavator service repair manual from 1390000 t...iekkdmmem
This document contains a safety checklist for operating heavy machinery. It lists many potential hazards and provides warnings about how to avoid injuries. Operators are instructed to always be careful and alert, wear proper protective clothing, avoid distractions, inspect work sites for hazards, communicate clearly with others, and never operate faulty or modified equipment. Specific dangers highlighted include being struck by moving parts, electrocution from power lines, explosions in hazardous atmospheres, and falls from unsecured work platforms. The checklist emphasizes practicing new tasks safely and following all applicable regulations and manuals.
Jcb js290 tier iii auto tracked excavator service repair manual sn 01421200...iekkdmmem
This document provides torque settings for fasteners used on JCB machines. It discusses zinc plated, Dacromet plated, and yellow plated fasteners. Dacromet fasteners have a silver mottled appearance and lower torque settings than zinc or yellow plated fasteners. Tables are provided with torque settings for UNF and metric fasteners under lubricated and unlubricated conditions. The settings are intended for use when specific torque values are not provided elsewhere in the manual.
The document is a technical manual that provides instructions and specifications for repairing N Series engines that comply with EU/2002/88/CE regulations. It contains sections on general specifications, fuel systems, applications, overhaul procedures, required tools, and safety precautions. The sections are numbered and provide information on topics like specifications, torque values, tool lists, repair procedures, and maintenance schedules. Symbols are used to classify warnings and service operations. Conversion tables are provided for units of measurement. The manual must be followed closely to safely and properly repair the engines.
Hyundai r170 w 9 wheel excavator service repair manualiekkdmmem
Here are the key steps to disassemble the transmission based on the information provided:
1. Drain the transmission oil through the screw plug into a suitable collector.
2. Remove the lube oil pump, downshift interlock, speed transmitter, bleeder, compression spring and ball.
3. Remove the threaded element with O-ring from the bore.
4. Remove the lubrication nipple, screw plugs, and bleeder valve.
5. Loosen the bolt connection of the input housing equally as it is subject to a cup spring.
Hyundai r160 lc 7a crawler excavator service repair manualiekkdmmem
This section provides instructions for removing and installing the boom, arm, and bucket cylinders on the excavator. The key steps are:
1. Fully extend the arm and bucket, lower the work equipment to the ground, and stop the engine before removal. Relieve hydraulic pressure.
2. Disconnect hydraulic hoses and greasing lines, and secure pins and rods to prevent parts from falling during removal.
3. Remove mounting pins and bolts, then sling and remove cylinder assemblies.
4. Installation is the reverse of removal. Bleed air from cylinders after installing. Check hydraulic oil level and for leaks.
Hyundai r140 w 7a wheel excavator service repair manualiekkdmmem
This document contains sections related to the service manual of an excavator. Section 1 provides general safety hints and specifications. Section 2 describes the structure and function of components such as the pump device, control valve, swing device, and transmission. Section 3 covers the hydraulic system including circuits. Section 4 details the electrical system components and circuits. Section 5 outlines the mechatronics systems. Section 6 is about troubleshooting. Section 7 includes maintenance standards. Section 8 provides instructions for disassembly and assembly of components. Section 9 lists component mounting torques.
Hyundai r55 w 7 wheel excavator service repair manualiekkdmmem
1. Remove the cover and O-ring from the geared pump section.
2. Remove the springs and spring seat from the main pump section.
3. Remove the rotary group, shaft, hanger, bearing and cover from the main pump section.
4. Remove the control piston by taking out its mounting bolts.
Hyundai r36 n 7 mini excavator service repair manualiekkdmmem
This service manual provides instructions for maintaining a hydraulic excavator. It outlines the machine's components and systems, including the engine, pumps, controls, hydraulics, undercarriage, and electrical equipment. The manual describes inspection and maintenance procedures organized by service intervals. Technicians should follow the procedures to properly service the excavator, replace worn parts, and troubleshoot any issues. Maintaining the machine according to this manual will help ensure long life and prevent failures and problems.
Hyundai hb100 backhoe loader service repair manualiekkdmmem
This document contains sections on safety, specifications, operational checks, engine systems, power train systems, brake systems, steering systems, work equipment, electrical systems, and troubleshooting guides for various components. It provides information on component locations, electrical circuits, monitoring systems, switch specifications, and testing and adjustment procedures. The sections cover the structure and function of components, operational checks and troubleshooting, tests and adjustments, and disassembly and reassembly instructions.
New holland w130 wheel loader service repair manualiekkdmmem
This document provides instructions for removing and installing the engine and radiator on a CNH America LLC W110 and W130 Wheel Loader. The steps include: parking the machine safely, disconnecting electrical and hydraulic systems, attaching lifting equipment to the engine compartment, and removing hoses, lines, and mounting hardware to separate the engine from the loader frame. Reinstallation involves reversing these steps and reconnecting all components.
New holland tt75 tier3 engine, 2 wd tractor service repair manualiekkdmmem
The document is a service manual for tractor models TT55, TT65, and TT75. It contains safety information and instructions for servicing various tractor systems, including the engine, transmission, axles, brakes, hydraulics, steering, wheels, and electrical systems. The manual provides part numbers and diagrams to aid technicians in maintenance and repairs. Safety is emphasized throughout, warning technicians to follow procedures, wear protective equipment, and avoid hazards like operating machinery with the engine running.
New holland ts135 a tractor service repair manualiekkdmmem
This document is a service manual for New Holland TS100A, TS110A, TS115A, TS125A, TS130A, and TS135A tractors. It provides instructions and specifications for separating the front axle and front support from the engine on these tractor models. The summary includes torque values for fasteners, lists any special tools required, and provides a step-by-step procedure for separating the front axle and support. Health and safety warnings and environmental considerations are also addressed at the beginning.
New holland tk4040 tractor service repair manualiekkdmmem
This document is a service manual for tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. It contains introduction sections on safety rules, basic instructions, and consumables to be used during service. The bulk of the manual provides technical content on the engine, clutch, transmission, rear axle system, power take-off, brakes and controls, hydraulic systems, steering clutches, tracks and track suspension, electrical systems, and the platform, cab, and bodywork of the tractors.
New holland tk80 ma tractor service repair manualiekkdmmem
This document is a repair manual for CNH America LLC tractor models TK75VA, TK80A, TK80MA, TK90A, TK90MA, and TK100A. It contains sections covering the engine, clutch, transmissions, rear mechanical drive, braking system, hydraulic systems, steering clutches, suspension and tracks, and electrical system. The document provides general safety and handling instructions for working on and operating the tractors, and warns that all maintenance and repairs should only be performed by authorized technicians according to the instructions. It also contains lubrication charts and emissions warranty information.
New holland td90 tractor service repair manualiekkdmmem
This document is the service manual for TD60-TD95 straddle mount model tractors. It contains sections on general information, the engine system, clutches, mechanical transmission (12x4), reverser (12x12) and other systems. Each section provides specifications, views, removal/installation instructions, and troubleshooting information for the components in that system. The manual is intended to guide service technicians in repairing and maintaining these tractors.
New holland t8.420 (cvt) tractor service repair manualiekkdmmem
This document is a service manual that provides information on servicing and repairing various systems for tractor models T8.275, T8.300, T8.330, T8.360, T8.390, and T8.420, including the engine, transmission, axles, hydraulics, electrical systems, cab, and other components. The manual contains safety instructions, torque specifications, fluid capacities and provides section references to detailed information on troubleshooting and repairing individual tractor systems.
New holland t8.380 smart trax continuously variable transmission (cvt) tracto...iekkdmmem
The document is a service manual that provides maintenance instructions for engine components of various tractor models. It includes sections on the engine and crankcase, cylinder heads, air cleaners and lines, fuel filters, fuel tanks, fuel injection system, engine lubrication system, aftercooler, engine cooling system, fan and drive, and selective catalytic reduction exhaust treatment. Each section provides detailed instructions, specifications, and diagrams for servicing the corresponding component.
New holland t8.380 continuously variable transmission (cvt) tractor service r...iekkdmmem
The document is a service manual that provides specifications and repair instructions for engines and other components of tractor models T8.320, T8.350, T8.380, T8.410, and T8.435. It contains sections on the engine and crankcase, cylinder heads, air/fuel systems, lubrication systems, cooling systems, and electrical systems. Repair procedures are listed by component and illustrated with diagrams.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
3. Contents
INTRODUCTION
HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS A
PRIMARY HYDRAULIC POWER SYSTEM.............................................. A.10.A
SECONDARY HYDRAULIC POWER SYSTEM.......................................... A.12.A
HYDRAULIC COMMAND SYSTEM...................................................... A.14.A
HIGH-FLOW HYDRAULIC POWER SYSTEM ........................................... A.16.A
ELECTRICAL POWER SYSTEM ........................................................ A.30.A
LIGHTING SYSTEM...................................................................... A.40.A
ELECTRONIC SYSTEM ................................................................. A.50.A
FAULT CODES ........................................................................... A.50.A
ENGINE AND PTO IN ................................................................... B
ENGINE .................................................................................. B.10.A
FUEL AND INJECTION SYSTEM........................................................ B.20.A
AIR INTAKE SYSTEM.................................................................... B.30.A
ENGINE COOLANT SYSTEM ........................................................... B.50.A
STARTING SYSTEM ..................................................................... B.80.A
TRANSMISSION, DRIVE AND PTO OUT........................................ C
TRANSMISSION Hydrostatic............................................................. C.20.F
AXLES, BRAKES AND STEERING................................................. D
Final drive ................................................................................ D.15.A
Final drive Hydraulic drive ................................................................ D.15.C
STEERING Mechanical .................................................................. D.20.B
PARKING BRAKE Hydraulic ............................................................. D.32.C
WHEELS AND TRACKS Tracks ......................................................... D.50.B
WHEELS AND TRACKS Wheels......................................................... D.50.C
FRAME AND CAB ........................................................................ E
FRAME Primary frame ................................................................... E.10.B
SHIELD................................................................................... E.20.A
84522361 15/06/2011
4. USER CONTROLS AND SEAT .......................................................... E.32.A
USER CONTROLS AND SEAT Operator seat ........................................... E.32.C
USER PLATFORM ....................................................................... E.34.A
ENVIRONMENT CONTROL Air-conditioning system .................................... E.40.C
SAFETY SECURITY ACCESSORIES Safety ............................................ E.50.B
FRAME POSITIONING ................................................................. F
STABILISING Ballasting.................................................................. F.20.B
TOOL POSITIONING.................................................................... G
LIFTING .................................................................................. G.10.A
TILTING .................................................................................. G.20.A
LEVELLING .............................................................................. G.30.A
SECONDARY FUNCTIONS Hydraulic ................................................... G.90.C
HITCH AND WORKING TOOL ....................................................... H
BOOM Lift ................................................................................ H.20.B
ARM TOOL ATTACHMENT Tilt........................................................... H.30.C
SINGLE ARM Lift......................................................................... H.40.B
SINGLE ARM TOOL ATTACHMENT Tilt ................................................. H.50.C
EXCAVATING AND LANDSCAPING ............................................... J
DIGGING Non-articulated digging tools .................................................. J.20.B
CARRYING Unarticulated tools .......................................................... J.50.B
COUPLING Mechanical coupling......................................................... J.80.B
COUPLING Hydraulic coupling........................................................... J.80.C
84522361 15/06/2011
6. Contents
INTRODUCTION
Foreword - Ecology and the environment ...................................................... 3
Safety rules ..................................................................................... 4
2 - Series
Safety rules - Personal Safety .................................................................. 5
Safety rules ..................................................................................... 6
Basic instructions - Important notice regarding equipment servicing ........................... 7
Torque - Minimum tightening torques for normal assembly ..................................... 8
2 - Series
General specification - General Welding ..................................................... 13
84522361 15/06/2011
2
7. INTRODUCTION
Foreword - Ecology and the environment
Soil, air, and water are vital factors of agriculture and life in general. When legislation does not yet rule the treatment
of some of the substances which are required by advanced technology, sound judgement should govern the use and
disposal of products of a chemical and petrochemical nature.
NOTICE: The following are recommendations which may be of assistance:
• Become acquainted with and ensure that you understand the relative legislation applicable to your country.
• Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, antifreeze, cleaning
agents, etc., with regard to their effect on man and nature and how to safely store, use and dispose of these
substances.
• Agricultural consultants will, in many cases, be able to help you as well.
HELPFUL HINTS
• Avoid filling tanks using cans or inappropriate pressurized fuel delivery systems which may cause considerable
spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of them contain substances which
may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when draining off used engine coolant mixtures, engine, gearbox and hydraulic oils, brake fluids,
etc. Do not mix drained brake fluids or fuels with lubricants. Store them safely until they can be disposed of in
a proper way to comply with local legislation and available resources.
• Modern coolant mixtures, i.e. antifreeze and other additives, should be replaced every two years. They should
not be allowed to get into the soil but should be collected and disposed of properly.
• Do not open the air-conditioning system yourself. It contains gases which should not be released into the at-
mosphere. Your NEW HOLLAND CONSTRUCTION dealer or air conditioning specialist has a special extractor
for this purpose and will have to recharge the system properly.
• Repair any leaks or defects in the engine cooling or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding as penetrating weld splatter may burn a hole or weaken them, allowing the loss of
oils, coolant, etc.
84522361 15/06/2011
3
8. INTRODUCTION
Safety rules
2 - Series
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual and on machine decals, you will find the signal words DANGER, WARNING, and CAUTION
followed by special instructions. These precautions are intended for the personal safety of you and those working
with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. The
color associated with DANGER is RED.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
The color associated with WARNING is ORANGE.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury. The color associated with CAUTION is YELLOW.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation which, if not avoided, could result in machine or property damage. The color
associated with Notice is BLUE.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information which clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
84522361 15/06/2011
4
9. INTRODUCTION
Safety rules - Personal Safety
Carefully study these precautions, and those included in the external attachment operators
manual, and insist that they be followed by those working with and for you.
1. Thoroughly read and understand this manual and the attachment operators manual before operating this or any
other equipment.
2. Be sure everyone is clear of the machine before starting. Blow the horn, if equipped, three times before starting
engine.
3. Only the operator should be on the machine when in operation. Never allow anyone to climb on to the machine
while it is in motion. If the machine is equipped with an Instructors Seat, this must only be used for training
purposes. Passengers must not be allowed to use the Instructors Seat.
4. Keep all shields in place. Never work around the machine or any of the attachments while wearing loose clothing
that might catch on moving parts.
5. Observe the following precautions whenever lubricating the machine or making adjustments.
• Disengage all clutching levers or switches.
• Lower the attachment, if equipped, to the ground or raise the attachment completely and engage
the cylinder safety locks . Completing these actions will prevent the attachment from lowering un-
expectedly.
• Engage the parking brake.
• Shut off the engine and remove the key.
6. Always keep the machine in gear while going downhill.
7. The machine should always be equipped with sufficient front or rear axle weight for safe operation.
8. Under some field conditions, more weight may be required at the front or rear axle for adequate stability. This
is especially important when operating in hilly conditions or/when using heavy attachments.
9. Always lower the attachment, shut off the engine, set the parking brake, engage the transmission gears and
remove the key before leaving the operators platform.
10. If the attachment or machine should become obstructed or plugged; set the parking brake, shut off the engine
and remove the key, engage the transmission gears, wait for all machine or attachment motion to come to a
stop, before leaving the operators platform to removing the obstruction or plug.
11. Never disconnect or make any adjustments to the hydraulic system unless the machine and/or the attachment
is lowered to the ground or the safety lock(s) is in the engaged position.
12. Use of the flashing lights is highly recommended when operating on a public road.
13. When transporting on a road or highway, use accessory lights and devices for adequate warning to the operators
of other vehicles. In this regard, check local government regulations. Various safety lights and devices are
available from your NEW HOLLAND CONSTRUCTION dealer.
14. Practice safety 365 days a year.
15. Keep all your equipment in safe operating condition.
16. Keep all guards and safety devices in place.
17. Always set the parking brake, shut off the engine and remove the key, engage the transmission gears, wait for all
machine or attachment motion to come to a stop, before leaving the operators platform to service the machine
and attachment.
18. Remember: A careful operator is the best insurance against an accident.
19. Extreme care should be taken in keeping hands and clothing away from moving parts.
84522361 15/06/2011
5
10. SERVICE MANUAL
HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS
C227 , C232 , C238 , L213 , L215 , L218 , L220 , L223 , L225 , L230
84522361 15/06/2011
A
11. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - Flow test Loader hydraulic pump
NOTE: Two persons are required to perform the flowmeter tests for safety to avoid possible injury. One person must
be seated in the operators seat when the engine is running. The second person is to control the flowmeter and take
the readings.
1. Park the machine on a level surface. Lower the
loader bucket to the floor. Stop the engine.
2. Disconnect the hose from the loader pump pressure
port (1) at Test Point 1. Install a plug in the hose.
Connect the flowmeter inlet hose to the fitting at the
pressure port (1) of the pump. If equipped with high
flow, disconnect the hose from the high flow pressure
port (2). Install a plug in the hose. Connect a second
flowmeter inlet hose to the fitting at the pressure port
(2) of the pump.
NOTE: The first picture is for models equipped with a hy-
draulic gear pump only. The second picture is for models
equipped with a hydraulic gear pump with high flow option.
931002073 1
931001956 2
3. Put the flowmeter outlet hose into the hydraulic reser-
voir. Use wire to fasten the flowmeter outlet hose be-
low the surface of the hydraulic oil.
4. Make sure that the oil level in the hydraulic reservoir
is correct.
5. Make sure that the pressure valve of the flowmeter
is opened completely.
6. The oil must be at operating temperature. If the oil
is not at operating temperature, run the engine at full
throttle and close the pressure valve of the flowmeter
until the pressure gauge indicates 103 bar (1500 psi).
Continue to run the engine at full throttle until the
temperature of the oil is 52°C (125°F). Then open
the pressure valve completely.
7. Make sure that the pressure valves are opened com-
pletely. Adjust the engine speed to 2300 r/min (rpm)
and read the flow gauge. Read the flow and record
the reading as test number 1 .
8. Slowly close the pressure valve on the flowmeter on
the loader pump until the pressure gauge indicates
97 bar (1400 psi). Keep the engine running at 2300
r/min (rpm). Read the flow and record the reading as
test number 2 .
84522361 15/06/2011
A.10.A / 111
12. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
9. Slowly close the pressure valve on the flowmeter un-
til the pressure gauge indicates 124 bar (1800 psi).
Keep the engine running at 2300 r/min (rpm). Read
the flow and record the reading as test number 3.
10. Slowly close the pressure valve on the flowmeter un-
til the pressure gauge indicates 152 bar (2200 psi).
Keep the engine running at 2300 r/min (rpm). Read
the flow and record the reading as test number 4.
11. Open the pressure valve completely. If the high flow
pump is installed, repeat steps 8 thru 10 on the high
flow section. Then decrease the engine speed to low
idle and stop the engine.
NOTE: Understanding the results of the tests are outlined
in the steps below.
12. If the output at minimum pressure was less than
the specification for Gear Pump Flow to Loader
(Machine in Neutral) refer to PRIMARY HY-
DRAULIC POWER SYSTEM - General specifi-
cation (A.10.A), the problem can be a restriction
between the reservoir and the gear pump, or the
problem can be a badly worn or damaged gear
pump.
13. If the output at minimum pressure was more
than the specification refer to PRIMARY HY-
DRAULIC POWER SYSTEM - General specifica-
tion (A.10.A), there are no problems between the
reservoir and the gear pump. However, the gear
pump can be worn or damaged and still have good
flow at minimum pressure.
14. Loss of output at 152 bar (2200 psi) indicates that
the gear pump is worn or damaged. To determine
the efficiency of the gear pump, divide the flow indi-
cation from test number 4 by the flow indication from
test number 1. This answer multiplied by 100 is the
percent efficiency of the gear pump. If the efficiency
of the gear pump is less than 70%, repair or replace
the gear pump. If the efficiency of the gear pump is
more than 70%, the pump is good.
84522361 15/06/2011
A.10.A / 112
13. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - Install
NOTE: Before pump installation, apply Molykote G-4700 (P/N 86983138) to the pump and the coupling splines. Pre-fill
the pump with clean hydraulic oil. Inspect O-ring on the pump pilot and replace if necessary. Lubricate the O-ring with
clean hydraulic oil.
1. Hold the pump in the mounting location. Rotate the
gear pump shaft until it aligns with the coupling (1)
splines at the rear of the hydrostatic pump. Shown
with call out (X) After the splines are aligned, move
the pump inward until the mounting flange is flush
with the mounting surface of the hydrostatic pump.
93111555A 1
2. Apply Loctite 243 to the pump mounting bolts (4). In-
stall washers on the bolts and install the bolts into the
pump mounting flange. Tighten the mounting bolts .
931001928 2
3. Connect gear pump hydraulic hoses (A) and (B), as
shown.
931001956 3
4. Connect the gear pump supply hose (1) and tighten
hose clamp.
931001955 4
84522361 15/06/2011
A.10.A / 113
14. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
5. Connect case drain hose (2) and secure with clamp.
931001963 5
6. Connect hydraulic hose (3), as shown.
931001972 6
7. Connect left hand side drive motor hoses (C) and (D).
931001971 7
8. Connect right hand side motor hoses (5) and (6).
931001970 8
84522361 15/06/2011
A.10.A / 114
15. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
9. Connect the top hydraulic hose (7).
931001966 9
10. Connect the oil supply hose (8) and tighten hose
clamp.
931001965 10
11. Connect right hand side hydraulic tube (9).
931001964 11
12. Connect charge pressure switch (10) and secure
with nut.
931001963 12
84522361 15/06/2011
A.10.A / 115
16. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
13. Connect the right hand side back up alarm connec-
tions (11).
931001962 13
14. Connect the left hand side back up alarm connec-
tions (12).
931002115 14
15. Connect the control wires (E) and (F) located on the
bottom of pumps.
931001961 15
84522361 15/06/2011
A.10.A / 116
17. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Charge pump - Pressure test
Testing the low-pressure charge system is safer and usually more informative than going into the high-pressure test
ports. To obtain as much system information as possible, charge pressure readings must be taken in neutral as well
as working the system in both the forward and reverse directions.
With the system in neutral, only charge pressure is present in the closed loop. At this time, the leakage from the
system is the least and the charge pressure is the highest. As the system is pressurized, the leakage from the system
will increase and the charge pump flow will make up for this leakage. With more of the charge pump oil flowing to
the closed loop, less oil will flow across the charge pressure relief valve, and therefore the pressure will be slightly
less. If the leakage from the system is excessive, the charge pressure will drop off more. This slight drop in charge
pressure between the system in neutral and with the system under load indicates the condition of the closed loop
system components.
1. Raise and securely block the unit off the ground.
2. Remove the brake release lines from the tee fitting
that connects to the B port (1) of the brake valve (2)
and cap lines.
931002074 1
3. Cap the tee fitting that connects to the B port of the
brake valve.
4. Connect a 4,137 kPa (41 bar) (600 psi) pressure
gauge to the charge pressure test port. Remove the
hose from the tee fitting and install a 4,137 kPa(600
psi) pressure gauge.
5. If the hydraulic oil is not at operating temperature,
run the engine at full throttle and hold the bucket con-
trol lever in the ROLLBACK position for 30 seconds.
Then return the bucket control lever to NEUTRAL for
15 seconds. Repeat this cycle until the temperature
of the oil is at least 52°C (125°F).
6. Continue to run the engine at full throttle. Read
the pressure gauge and record the Charge Pressure
reading. Stop the engine.
7. The pressure reading must be 25 - 28 bar (362 - 410
psi) or the relief valve must be adjusted with shims.
8. If the pressure is correct, go to step 10. If the pres-
sure is not correct, loosen the cap on the hydraulic
reservoir. Remove the plug, shim(s), spring, and
poppet for the charge pressure relief valve.
9. Inspect the parts of the charge relief valve. If the
parts are good, add shim(s) from the shim kit, refer
to parts manual, and repeat steps 5 through 9 until
the pressure is correct.
NOTICE: For the following test the machine MUST be
raised up on supports until the tires are above the floor.
This is a safety procedure if the hydraulic parking brakes
fail to hold.
84522361 15/06/2011
A.10.A / 117
18. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
10. After you get the correct charge pressure in NEU-
TRAL, do the following steps:
A. Start and run the engine at low idle. Increase
the engine speed to full throttle. If equipped with
2 speed, shift into transport (high) range. Slowly
move one of the direction control levers FORWARD
to load the hydrostatic piston pump and drive mo-
tor without decreasing the engine speed. DO NOT
Lug the Engine. Reduced engine speed causes de-
creased charge pump flow, which will affect the pres-
sure readings. Repeat for the opposite side (only
move one lever at a time).
B. Read the pressure gauge. The pressure must be
within 138 kPa (1.5 bar) (20 psi) of the pressure in
step 6.
C. Repeat Steps A and B with the direction control
levers in REVERSE.
Interpretation of the results:
Once the charge pressure meets specifications with
the levers in the neutral position, compare the pres-
sure readings under load with the neutral readings.
The readings should be highest with the levers in the
NEUTRAL position, for this is when the direct act-
ing charge relief has to handle the greatest amount
of oil flow. The maximum difference in charge pres-
sure readings between the system in neutral and
the system loaded in both directions must be not
greater than 138 kPa (1.5 bar) (20 psi). Any differ-
ence greater than 138 kPa (1.5 bar) (20 psi) indicates
excessive leakage from the closed loop, which will
require repair.
NOTE: The charge pressure drop indicates internal leak-
age from the system with the system under load. This is
caused by less oil flowing over the charge relief and there-
fore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed
on that side of the machine, but depending on what is dam-
aged in the system, the leakage may only show up under
heavy load conditions.
NOTE: To determine if the problem is in the pump or the
motor do the following:
11. On the side (left or right) that the charge pressure
dropped more than 138kPa (1.5 bar) (20psi), cap the
two high-pressure lines that supply the drive motor.
The lines can be capped at either the pump or at the
motor, which ever is easiest.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
12. With the lines capped to the drive motor, start and run
the engine at low idle. Increase the engine speed
to full throttle. Slowly move the direction control
lever that is being tested FORWARD to load the hy-
drostatic piston pump without decreasing the engine
speed. DO NOT Lug the Engine. Reduced engine
speed causes decreased charge pump flow, which
will affect the pressure readings.
84522361 15/06/2011
A.10.A / 118
19. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
13. Read the pressure gauge. The pressure must be
within 138 kPa (1.5 bar) (20 psi) of the pressure in
step 6.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
14. Repeat Steps 11 and 12 with the direction control
levers in REVERSE.
Interpretation of the results with the two high-pres-
sure lines capped to the drive motors:
If the charge pressure drops more than 138 kPa (1.5
bar) (20 psi) of the pressure in step 6, the leakage is
in the pump.
Remember that this is a closed loop hydrostatic sys-
tem. If one component fails, the debris will be sent
directly to the mating component and cause damage.
As this damage progresses, contamination will return
to the reservoir through the case drain system. At
the very least once a failure has occurred, the mat-
ing component in the hydrostatic system must be in-
spected for damage. If any contamination has been
returned to the reservoir, tear down and inspection
of both complete closed loop systems is necessary
since the same charge pump feeds them. Also, be-
cause the hydraulic system shares the reservoir with
the hydrostatic system, all lines, and components
must be thoroughly cleaned to prevent contamina-
tion from reentering the repaired system.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
84522361 15/06/2011
A.10.A / 119
20. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Charge pump - Pressure test (Machines Equipped with EH Controls)
1. Connect a 4,137 kPa (41 bar) (600 psi) pressure
gauge to test port, (1) see next figure.
NOTICE: For the following test the machine MUST be
raised up on supports until the tires are above the floor.
This is a safety procedure if the parking brakes fail to hold.
NOTE: You will need two people to perform this test. The
operator seat must be in the raised position to gain access
to the hydrostatic pump.
20111248 1
2. If the hydraulic oil is not at operating temperature run
the engine at full throttle and hold the bucket con-
trol lever in the ROLLBACK position for 30 seconds.
Then return the bucket control lever to NEUTRAL for
15 seconds. Repeat this cycle until the temperature
of the oil is at least 52°C (125°F).
3. Continue to run the engine at full throttle. Read
the pressure gauge and record the Charge Pressure
reading. Stop the engine.
4. The pressure must be a minimum of 2,413 kPa (24
bar) (350 psi) at full throttle.
5. If the pressure is correct go to step 7. If the pressure
is not correct loosen the cap on the hydraulic reser-
voir. Remove the plug, shim(s), spring, and poppet
for the charge relief valve. See figure below.
6. Inspect the parts of the charge relief valve (1). If the
parts are good, add shim(s) from the shim kit and
repeat steps 1 through 4 until the pressure is correct.
20111248 2
7. After you get the correct charge pressure in NEU-
TRAL, do the following steps.
NOTICE: For the following test the machine MUST be
raised up on supports until the tires are above the floor.
This is a safety procedure if the parking brakes fail to hold.
84522361 15/06/2011
A.10.A / 120
21. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
8. (A.) Start and run the engine at low idle. Engage the
parking brake. If equipped with 2 speed, shift into
transport (high) range.
(B.) Increase the engine speed to full throttle. Slowly
move the ground drive control lever FORWARD to
load the hydraulic piston pumps without decreasing
the engine speed.
(C.) Read the pressure gauge. The pressure must
be within 138 kPa (1.5 bar) (20 psi) of the pressure
in step 3.
(D.) Repeat Steps B and C with the ground drive
control lever in REVERSE position.
Interpretation of the results:
Once the charge pressure meets specifications with
the levers in the neutral position, compare the pres-
sure readings under load with the neutral readings.
The readings should be highest with the levers in the
NEUTRAL position, for this is when the direct act-
ing charge relief has to handle the greatest amount
of oil flow. The maximum difference in charge pres-
sure readings between the system in neutral and
the system loaded in both directions must be not
greater than 138 kPa (1.5 bar) (20 psi). Any differ-
ence greater than 138 kPa (1.5 bar) (20 psi) indicates
excessive leakage from the closed loop, which will
require repair.
NOTE: The charge pressure drop indicates internal leak-
age from the system with the system under load. This is
caused by less oil flowing over the charge relief and there-
fore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed
on that side of the machine, but depending on what is dam-
aged in the system, the leakage may only show up under
heavy load conditions.
NOTE: To determine if the problem is in the pump or the
motor do the following:
9. On the side (left or right) that the charge pressure
dropped more than 138kPa (1.5 bar) (20psi), cap the
two high-pressure lines that supply the drive motor.
The lines can be capped at either the pump or at the
motor, which ever is easiest.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
10. With the lines capped to the drive motor, start and run
the engine at low idle. Increase the engine speed
to full throttle. Slowly move the direction control
lever that is being tested FORWARD to load the hy-
drostatic piston pump without decreasing the engine
speed. DO NOT Lug the Engine. Reduced engine
speed causes decreased charge pump flow, which
will affect the pressure readings.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
84522361 15/06/2011
A.10.A / 121
22. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
11. Read the pressure gauge. The pressure must be
within 138 kPa (1.5 bar) (20 psi) of the pressure in
step 3.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
12. Repeat Steps 9 and 10 with the direction control
levers in REVERSE.
Interpretation of the results with the two high-pres-
sure lines capped to the drive motors:
If the charge pressure drops more than 138 kPa (1.5
bar) (20 psi) of the pressure in step 3, the leakage is
in the pump.
Remember that this is a closed loop hydrostatic sys-
tem. If one component fails, the debris will be sent
directly to the mating component and cause damage.
As this damage progresses, contamination will return
to the reservoir through the case drain system. At
the very least once a failure has occurred, the mat-
ing component in the hydrostatic system must be in-
spected for damage. If any contamination has been
returned to the reservoir, tear down and inspection
of both complete closed loop systems is necessary
since the same charge pump feeds them. Also, be-
cause the hydraulic system shares the reservoir with
the hydrostatic system, all lines, and components
must be thoroughly cleaned to prevent contamina-
tion from reentering the repaired system.
NOTE: The charge pressure drop indicates internal leakage from the system with the system under load. This is
caused by less oil flowing over the charge relief and therefore, the lower pressure. Excessive leakage (greater than
138 kPa (1.5 bar) (20 psi) will result in slower drive speed on that side of the machine, but depending on what is
damaged in the system, the leakage may only show up under heavy load conditions.
84522361 15/06/2011
A.10.A / 122
23. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Reservoir - Apply vacuum
1. Remove the cap from the hydraulic reservoir.
2. Install an adapter cap CAS1871 on the filler neck.
3. Connect the vacuum pump CAS10193 to the
adapter.
4. Start the vacuum pump.
84522361 15/06/2011
A.10.A / 123
24. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Reservoir - Filling
1. Lower the loader lift arms to the ground and shut off
the engine.
2. Clean the reservoir filler cap and the area around the
filler cap with cleaning solvent.
3. Turn the filler cap 1/2 turn to relieve air pressure from
the reservoir. Do not remove the filler cap from the
reservoir until the pressure is relieved.
4. Remove the filler cap from the reservoir.
5. Add the correct oil, CNH MAT3509, to the reservoir
until the proper oil level in the reservoir is established.
Fill the reservoir until the oil level is at the midpoint
of the sight gauge. Install the reservoir cap.
6. Start and run the engine and operate the hydraulics.
Lower the loader lift arms to the ground. Stop the
engine and check the oil level in the reservoir. Add
oil as required.
84522361 15/06/2011
A.10.A / 124
25. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Reservoir - Visual inspection
1. Check the reservoir for wear, cracks, and leaks. Re-
pair as required.
NOTICE: Do not modify the strainer, as any material that
gets past the strainer can go directly to the gear pump,
control valve, cylinders, and auxiliary hydraulic attachment
and cause major damage to these components.
2. Inspect the strainer. Remove and replace if the
strainer is dirty or clogged.
3. Inspect the return line port, and suction line port, for
cracks and debris buildup. Repair as required.
84522361 15/06/2011
A.10.A / 125
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Filter - Remove
Prior operation:
Reservoir - Apply vacuum (A.10.A).
1. The filter base can be removed by opening the rear
door and lifting the rear engine hood. Loosen and
remove the filter element (1) from the filter base.
2. Remove the ground wire (2).
93107491 1
3. Remove the inlet, (3), and outlet, (4), oil lines and
cap to prevent loss of oil.
4. Stop vacuum pump.
5. Loosen and remove the filter base mounting bolts (5).
93106865 2
6. Remove the filter base assembly from the unit.
84522361 15/06/2011
A.10.A / 126
28. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Filter - Install
Prior operation:
Reservoir - Apply vacuum (A.10.A).
1. Reinstall the filter base with the hardware previously
removed (1). Torque the mounting hardware to 20
Nm ( 15 lb ft).
93106865 1
2. Reinstall the hydraulic lines (2) and (3) and tighten
the lines to seat line on fittings; loosen and re-torque.
93107491 2
3. Stop vacuum pump.
4. Connect the ground wire (4) to the filter sensor.
93106865 3
5. Coat the seal ring on a new filter element with clean
10W-30 oil, and tighten the new filter element hand
tight 23.0 - 17.6 N·m (17 - 13 lb ft) .
84522361 15/06/2011
A.10.A / 127
29. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Oil cooler - Remove for models equipped with ISM engine
L213, L215, L218, L220
Prior operation:
Radiator - Remove (B.50.A).
1. Drain hydraulic oil reservoir by removing drain plug
(1).
931001657 1
2. If required, remove fan shroud mounting hardware
(1).
931001660 2
3. Remove engine oil dip stick mounting bolt (1).
931001661 3
84522361 15/06/2011
A.10.A / 128
30. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
4. Remove coolant overflow hose (1) and tank bracket
(2).
931001662 4
5. Remove fan shroud (1).
931002064 5
6. Label and disconnect cooler hydraulic lines (1) and
cap open ports.
931001666 6
7. Remove oil cooler mounting hardware (1) from both
left and right hand sides.
931001665 7
84522361 15/06/2011
A.10.A / 129
31. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
8. Remove oil cooler (1) from the machine.
931001667 8
Next operation:
Oil cooler - Install for machines equipped with ISM engine (A.10.A)
84522361 15/06/2011
A.10.A / 130