Muhammad Zahir Ali Email: ali.zaheer.zaheer@gmail.com
Mobile: 00966- 599591922
Objective
To work in a dynamic organization where advancements are based on achievements, aspiring to
utilize my technical skills to maximum, while contributing to achieving a new high in company
excellence.
Work Experience – 3+ years.
1. worked as a 2G, 3G, LTE RF DT ENGINEER for Ericsson-MOBILY U-900.
(Mobicom, JEDDAH – Saudi Arabia APR-2014 to Dec-2015)
2. GSM Installation as a Telecom technician NSN
(FGC, Abha- Saudi Arabia Aug-2013 to Mar-2014)
3. Mobicom IT co. Islamabad Pakistan
Field Maintenance Engineer (FTTM,FTTX)- Aug 2012 – June-2013
Responsibilities Of DTE in 2G, 3G, LTE :
 Analysis of UMTS sites based on Coverage_RSCP,Quality_Ec/No, and plot pollution.
 Analysis of cell sites including Drive test with the help of TEMS 16.3 &Post processing TEMS
Discovery
 To check missing neighbors, Softer, soft, Hard Handovers and IRAT (3G to 2G) Handovers.
 Checking Co scrambling code issues.
 Single Cell Functionality Test (SCFT) to check all services (Voice Call,, SMS, MMS, R99,
HSDPA,and HSUPA) are functional after new site on-air.
 Analysis of Gsm sites based on coverage RxLev and pilot pollution.
 Create the legend of RSCP,Ec/No and Rxlev(dBM)
 Bench marking of 2G,3G of two different networks on idle and dedicated mode.
 Ability to check near/edge point throughput test
 How to check cell reselection test.
 Work on cluster of 3G and LTE.
 Create basic map thematic.
 ERAB test.
Tools Experienced:
Drive Test tool
 TEMS Investigation 16.3
Mapping Tools MS Office
 MAPINFO 12.5
 MCOM
 Google Earth
 Excel
 power point
Responsibilities ofTelecom technician
 Install the DC rectifiers in BTS.
 Install earth breakers in BTS.
 Install all power system in BTS.
 Install NSN RF modules ODUs and IDUs.
 Install RF antennas.
 Install and align the Microwave antenna .
 Use the compass to set azimuth of antennas.
 Use the GPS to reach on destination.
Responsibilities Field Maintenance Engineer:
 Inspection on Optical line Terminal7342,7360 Pat on sites.
 Inspection on Main Distribution unit 7342,7356 on Fttm sites.
 Maintenance Main Distribution unit 7342,7356 on Fttm sites.
 Maintenance Optical line Terminal ,Optical distribution frame.
 Maintenance SPLITTERS in STC Exchanges.
 Maintenance host Jumpering in Exchanges.
 Installation and Integration Main Distribution units.
Academic Achievements
Degree/Certificate University/Board From To Marks/CGPA
B.E Telecommunication NUML, Islamabad 2008 2012 2.5/4
DAE(electronics) PBTE,Lahore 2003 2007 67%
SSC (Computer Science) BISE,Rawalpindi 2001 2003 60%
Pakistan Engineering Council (PEC) Certification No.
 TELE/5215
 138 Cumulative Credit Hours
Major Courses
Courses In B.E Telecom Engineering
 Basic Electrical Engineering
 Computer Programming (C++)
 Computer Communication & Networking (CCN)
 Communication System
 Wireless & Mobile Communication
 RF & Microwave Engineering
 Transmission & Switching
 Telecom System
 Broad Band Communication Network
 Optical Fiber Communication
 Wave Propagation & Antennas
Courses in Diploma OfAssociate Engineer (DAE Electronics)
 Electrical Essentials & Networks
 Electrical Drawing
 Electronics Devices & Circuits
 Measuring Instruments
 Pulse & Digital Circuits
 Communication Systems
 TV Circuits & Systems
 Antenna & Transmission Lines
 Microwave & Radar
Personal Profile
Father’s Name : Muhammad Rafique
Date of Birth : 01-01-1986
Marital Status : Single
Nationality : Pakistani
Languages : English, Urdu and Partial Arabic
Iqama Status : Valid & Transferable

m.zaheer ali (1)

  • 1.
    Muhammad Zahir AliEmail: ali.zaheer.zaheer@gmail.com Mobile: 00966- 599591922 Objective To work in a dynamic organization where advancements are based on achievements, aspiring to utilize my technical skills to maximum, while contributing to achieving a new high in company excellence. Work Experience – 3+ years. 1. worked as a 2G, 3G, LTE RF DT ENGINEER for Ericsson-MOBILY U-900. (Mobicom, JEDDAH – Saudi Arabia APR-2014 to Dec-2015) 2. GSM Installation as a Telecom technician NSN (FGC, Abha- Saudi Arabia Aug-2013 to Mar-2014) 3. Mobicom IT co. Islamabad Pakistan Field Maintenance Engineer (FTTM,FTTX)- Aug 2012 – June-2013 Responsibilities Of DTE in 2G, 3G, LTE :  Analysis of UMTS sites based on Coverage_RSCP,Quality_Ec/No, and plot pollution.  Analysis of cell sites including Drive test with the help of TEMS 16.3 &Post processing TEMS Discovery  To check missing neighbors, Softer, soft, Hard Handovers and IRAT (3G to 2G) Handovers.  Checking Co scrambling code issues.  Single Cell Functionality Test (SCFT) to check all services (Voice Call,, SMS, MMS, R99, HSDPA,and HSUPA) are functional after new site on-air.  Analysis of Gsm sites based on coverage RxLev and pilot pollution.  Create the legend of RSCP,Ec/No and Rxlev(dBM)  Bench marking of 2G,3G of two different networks on idle and dedicated mode.  Ability to check near/edge point throughput test  How to check cell reselection test.  Work on cluster of 3G and LTE.
  • 2.
     Create basicmap thematic.  ERAB test. Tools Experienced: Drive Test tool  TEMS Investigation 16.3 Mapping Tools MS Office  MAPINFO 12.5  MCOM  Google Earth  Excel  power point Responsibilities ofTelecom technician  Install the DC rectifiers in BTS.  Install earth breakers in BTS.  Install all power system in BTS.  Install NSN RF modules ODUs and IDUs.  Install RF antennas.  Install and align the Microwave antenna .  Use the compass to set azimuth of antennas.  Use the GPS to reach on destination. Responsibilities Field Maintenance Engineer:  Inspection on Optical line Terminal7342,7360 Pat on sites.  Inspection on Main Distribution unit 7342,7356 on Fttm sites.  Maintenance Main Distribution unit 7342,7356 on Fttm sites.  Maintenance Optical line Terminal ,Optical distribution frame.  Maintenance SPLITTERS in STC Exchanges.  Maintenance host Jumpering in Exchanges.  Installation and Integration Main Distribution units.
  • 3.
    Academic Achievements Degree/Certificate University/BoardFrom To Marks/CGPA B.E Telecommunication NUML, Islamabad 2008 2012 2.5/4 DAE(electronics) PBTE,Lahore 2003 2007 67% SSC (Computer Science) BISE,Rawalpindi 2001 2003 60% Pakistan Engineering Council (PEC) Certification No.  TELE/5215  138 Cumulative Credit Hours Major Courses Courses In B.E Telecom Engineering  Basic Electrical Engineering  Computer Programming (C++)  Computer Communication & Networking (CCN)  Communication System  Wireless & Mobile Communication  RF & Microwave Engineering  Transmission & Switching  Telecom System  Broad Band Communication Network  Optical Fiber Communication  Wave Propagation & Antennas Courses in Diploma OfAssociate Engineer (DAE Electronics)  Electrical Essentials & Networks  Electrical Drawing
  • 4.
     Electronics Devices& Circuits  Measuring Instruments  Pulse & Digital Circuits  Communication Systems  TV Circuits & Systems  Antenna & Transmission Lines  Microwave & Radar Personal Profile Father’s Name : Muhammad Rafique Date of Birth : 01-01-1986 Marital Status : Single Nationality : Pakistani Languages : English, Urdu and Partial Arabic Iqama Status : Valid & Transferable