My understanding of microworlds
•Download as PPTX, PDF•
0 likes•128 views
Y
Yr05This document describes several geometric shapes that can be created using microworld programming procedures. Each shape is defined by a procedure that uses repeats, forward movements, and right turns of specific degrees and pixel distances to form a square, rectangle, triangles, parallelogram, vortex, pentagon, and dodecagon.
Report
Share
Report
Share
![Square
Procedure: repeat 4 [fd 50 rt 90]
Forward fifty pixels, right turn 90
degrees four times= a square](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Angus' MicroWorld Project
This document describes how to create different shapes in the MicroWorlds programming environment using basic commands like forward, right, and repeat. It provides code to generate a square, rectangle, various triangles, pentagon, parallelogram, trapezium, rhombus, octagon, and donut pattern. For each shape, it explains the logic behind the commands, such as dividing the number of sides by 360 to determine the angle to turn for regular polygons.
Microworlds
This document contains instructions for drawing several shapes using Logo programming commands. It includes how to draw a square by repeating a turn and forward movement 4 times, a rectangle by turning and moving forward specific distances, two triangles of different sizes using turns and forward movements, a pentagon using turns and forward movements of set distances, a trapezium with turns and forward movements of varying distances, a circle by repeating a turn and forward movement 900 times, and a pattern by repeating a forward and turn movement 500 times. The document also provides a guide for the Logo programming commands used such as forward, left turn, right turn, back, clear screen, and pen down.
Surface mine (1)
Find the minimum required operating room for parallel cuts.
The required values are given below;
Bench height=40 ft.
The minimum clearance b/w the outer truck tire & safety berm=5 ft.
Bench face angle=70◦
Truck capacity=85 tons
Truck Width=16 ft.
Tire rolling radius=4 ft.
Working bench=102 ft.
Cut width=60 ft.
Swell factor=0.90
Holes Diameter=12 (1/4) inches
Mathematics Quiz on Area on Perimeter for class 7
PPT. prepared by me, student of class 7, Amity International School, Sector - 43, Gurgaon for the benefit of those students who want to learn Area and Perimeter for competitive exams.
Microworlds project Cecilia
This document contains Logo code that defines shapes like squares, rectangles, triangles, pentagons, trapezoids, and circles. It also contains a procedure to draw a windmill by repeating the scalene triangle procedure 15 times.
Hacker Librarian meets Curious Faculty: Building Workflows in a Multi-discipl...
This document summarizes the work of an open education librarian at a community college to build workflows for faculty open education projects. It outlines the librarian's role, principles of project management, and results from a faculty survey on open education which identified top concerns about connectivity, quality assurance, and copyright understanding. It then provides examples of open projects from different academic departments and outlines the general faculty workflow developed, from an initial meeting to assess needs and plan the project.
Open Modernisms
by Stephen Ross, Matt Huculak, & James Gifford University of Victoria & Fairleigh Dickinson University
BCcampus Open Pedagogy Effective Learning Design Matrix
The document discusses open pedagogy and effective learning design. It presents a matrix that compares open versus not open resources and approaches, and effective versus not effective learning design. Open resources and approaches involve using open educational resources (OER) and requiring students to publicly share their work. Effective learning design is described as authentic, flexible, learner-centered, and involving creative assignments that invite reflection and real-world learning with student choice. The document argues that combining open resources with effective learning design can provide greater academic freedom and opportunities for reflection and improvement compared to traditional closed approaches.
Recommended
Angus' MicroWorld Project
This document describes how to create different shapes in the MicroWorlds programming environment using basic commands like forward, right, and repeat. It provides code to generate a square, rectangle, various triangles, pentagon, parallelogram, trapezium, rhombus, octagon, and donut pattern. For each shape, it explains the logic behind the commands, such as dividing the number of sides by 360 to determine the angle to turn for regular polygons.
Microworlds
This document contains instructions for drawing several shapes using Logo programming commands. It includes how to draw a square by repeating a turn and forward movement 4 times, a rectangle by turning and moving forward specific distances, two triangles of different sizes using turns and forward movements, a pentagon using turns and forward movements of set distances, a trapezium with turns and forward movements of varying distances, a circle by repeating a turn and forward movement 900 times, and a pattern by repeating a forward and turn movement 500 times. The document also provides a guide for the Logo programming commands used such as forward, left turn, right turn, back, clear screen, and pen down.
Surface mine (1)
Find the minimum required operating room for parallel cuts.
The required values are given below;
Bench height=40 ft.
The minimum clearance b/w the outer truck tire & safety berm=5 ft.
Bench face angle=70◦
Truck capacity=85 tons
Truck Width=16 ft.
Tire rolling radius=4 ft.
Working bench=102 ft.
Cut width=60 ft.
Swell factor=0.90
Holes Diameter=12 (1/4) inches
Mathematics Quiz on Area on Perimeter for class 7
PPT. prepared by me, student of class 7, Amity International School, Sector - 43, Gurgaon for the benefit of those students who want to learn Area and Perimeter for competitive exams.
Microworlds project Cecilia
This document contains Logo code that defines shapes like squares, rectangles, triangles, pentagons, trapezoids, and circles. It also contains a procedure to draw a windmill by repeating the scalene triangle procedure 15 times.
Hacker Librarian meets Curious Faculty: Building Workflows in a Multi-discipl...
This document summarizes the work of an open education librarian at a community college to build workflows for faculty open education projects. It outlines the librarian's role, principles of project management, and results from a faculty survey on open education which identified top concerns about connectivity, quality assurance, and copyright understanding. It then provides examples of open projects from different academic departments and outlines the general faculty workflow developed, from an initial meeting to assess needs and plan the project.
Open Modernisms
by Stephen Ross, Matt Huculak, & James Gifford University of Victoria & Fairleigh Dickinson University
BCcampus Open Pedagogy Effective Learning Design Matrix
The document discusses open pedagogy and effective learning design. It presents a matrix that compares open versus not open resources and approaches, and effective versus not effective learning design. Open resources and approaches involve using open educational resources (OER) and requiring students to publicly share their work. Effective learning design is described as authentic, flexible, learner-centered, and involving creative assignments that invite reflection and real-world learning with student choice. The document argues that combining open resources with effective learning design can provide greater academic freedom and opportunities for reflection and improvement compared to traditional closed approaches.
Camp reflection
Gus Harris reflects on his experiences at camp, including going down the giant slide which he was excited for. He found the flying fox, where campers zip line through the air, to be one of the best moments as it was scary but fun, especially braking at the end. Dance nights were also a favorite where the campers had fun dancing to many songs. However, Gus's overall favorite moment was going down the flying fox for the first time despite initial fear, finding it to be a thrilling experience.
Camp reflection
Gus Harris reflects on his experiences at camp, including going down the giant slide which he was excited for. He found the flying fox, where campers zip line through the air, to be one of the best moments as it was scary but fun, especially braking at the end. Dance nights were also a favorite where the campers had fun dancing to many songs. However, Gus's overall favorite moment was going down the flying fox for the first time despite initial fear, finding it to be a thrilling experience.
Camp reflection
Gus Harris reflects on his experiences at camp, including going down the giant slide which he was excited for. He found the flying fox, where campers zip line through the air, to be one of the best moments despite initial fear, enjoying the thrill and fun break at the end. Dance nights were also a favorite, with lots of dancing to many fun songs that got everyone excited. However, his absolute favorite moment was overcoming his scare to experience the enjoyment of zipping down the flying fox.
Maker day term 3
On Maker Day, the students participated in hands-on engineering activities divided into three sessions. In the first session, Aimee and her partner Samantha built racing cars out of materials provided, drilling holes and assembling wheels, motors, and other parts. Aimee had to leave this activity early for a music lesson. Her second activity was building solar boats, where she joined a group that attached solar panels, motors, and propellers to test how the boats moved in water. At the end, the classes reflected on their experiences building the machines.
Camp
1) The document describes a camper's first few days at camp, including getting to know their cabin mates, enjoying delicious food, and having a shower on the first day.
2) On the second day, the camper participated in trust and initiative activities with their group. This included walking up a large hill and completing a challenging rope swinging task that required teamwork to get all group members on a small platform.
3) After overcoming difficulties through perseverance and different strategies, the group was able to complete the rope swinging task, making the camper proud of their accomplishment and learning that keeping trying leads to success.
A history of robots
The document provides a history of robots from ancient visions to modern achievements. It discusses early concepts and designs from Greek philosophers and inventors. The first modern robots were industrial machines in the 1960s that performed repetitive, dangerous tasks. Today's robots are more advanced and can have sensors to make decisions to complete complex tasks like packaging or military rescue operations. The document traces the progression of robot technology from simple machines to modern humanoid designs that mimic human abilities.
A History of Robots
The document provides a history of robots from ancient visions to modern achievements. It discusses early robotic concepts and inventions from Greek and Roman engineers. The first modern robots were industrial machines introduced in the 1960s that could perform repetitive, dangerous tasks. Today's robots are more advanced and can have sensors, control systems, and effectors that allow them to operate autonomously and assist humans in tasks that are difficult, risky, or time-consuming such as packaging items on an assembly line. The military has also developed robots to help with dangerous disposal and rescue missions.
Jesse rube goldberg machines reflection
The document describes the process of designing and building a Rube Goldberg machine over multiple sessions. It discusses the initial design plans, including required elements and rules. Key parts of the machine were then constructed, such as a marble run, pulley, and funnel. Modifications were made throughout the process, like adding a seesaw and gears. After modifications, the machine was tested and worked after several attempts. The final working machine had over 25 steps, from pushing a block to ringing a bell. Filming and editing was also done to create a movie documenting the machine.
Jesse's geometry through micro worlds
The document describes several programs created in MicroWorlds to generate different geometric shapes. The programs use variables, loops, and conditional statements to manipulate a turtle to draw the shapes. One program draws a star by repeating a section that increases the turtle's forward distance and changes its color. Another creates a disco bowling ball by calling a separate "turn" program and repeating a loop to draw concentric circles in different colors. A third makes a pinwheel with petals of a specified size by dividing 360 degrees by the number of petals.
Henry's shapes and angles
The document provides examples of code used to generate different shapes in the MicroWorlds programming environment. It demonstrates how to create squares, rectangles, triangles, pentagons, trapezoids, and patterns using the basic commands of fd, bk, rt, lt, and repeat. Key points made include that a square is a type of rectangle with all sides equal, and how to vary the side lengths and angles to generate different shapes like scalene triangles and trapezoids. Examples are given of combining shapes to make a house and using multiple turtles to create colored patterns.
Emmy's microworlds presentation
This document contains summaries of shapes and patterns created using the Microworlds programming environment. It discusses using repeat commands to more concisely create squares, rectangles, triangles, pentagons, quadrilaterals, and patterns. Specific formulas are provided for shapes like an equilateral triangle, trapezium, and a flower pattern made from repeating circles.
RGM refection
1. Emily, Jade, Clara, and Tilly built a Rube Goldberg machine using a cardboard tube, dominoes, a toy train, matchbox car, crochet ball, wooden wedge, and hole puncher to punch a piece of paper.
2. They went through several design changes before settling on using the hole puncher, and encountered problems like levers not working properly that they had to solve.
3. They incorporated four simple machines - an inclined plane, wedge, lever, and wheel and axle. The machine worked on their second try and they learned that perseverance leads to success.
Turtle shapes and commands on micro worlds!
This document provides instructions and summaries for drawing different shapes using turtle commands in a programming language. It describes how to draw a square with 4 equal sides and right angles, a rectangle with 2 longer parallel sides and 2 shorter parallel sides, two triangles with 45 and 135 degree angles, a pentagon with 5 sides and angles of 75, 45, and 90 degrees resembling a house, a rhombus with 4 sides that was difficult to draw correctly, an octagon drawn by repeating the commands "fd 50 rt 45" 8 times, and a random pattern using circles moving left and right without specific commands. The document was created by Ellie Ruggero in Class 5B.
Emmy's rube goldberg machine
The student was tasked with building a Rube Goldberg machine that performs a simple task for a school project. The machine had to fit within a specific size box and include a certain number of simple machines based on group size. The group of four students designed a machine over eight weeks that would turn a page in a book and place a lid on a bin. It was to use elements like a marble run, domino path, pulley system, and catapults. Building challenges arose from limited materials, but the students persevered and got their machine working, though it required modifications to elements like replacing catapults with wedges and inclined planes. In the end, they evaluated it as a successful project that they enjoyed creating
Rube goldberg reflection
Our group had to design a Rube Goldberg machine for a class project that was at least four simple machines long. We were given cardboard and other materials to use to build a contraption that would use a sequence of events to complete a simple task, such as turning on a light switch. Our biggest challenge was getting a pool ball to land in the right spot after being flicked by a gummy bear, so we adjusted our design to have the pool ball fall from a higher point.
Henry's shapes and angles
This document contains code examples and explanations for creating different shapes and patterns in the MicroWorlds programming environment. It demonstrates how to create basic shapes like squares, rectangles, triangles, pentagons, and trapezoids using different combinations of forward, backward, turn commands and repeating segments. More complex examples show how to combine multiple shapes to make a house and pattern designs using multiple turtles. Key concepts covered include using repeats and parameters to efficiently generate shapes, properties that define different quadrilateral and triangle types, and how to structure code to create scenes with multiple objects.
Turtle shapes and commands on micro worlds!
This document provides instructions and summaries for drawing different shapes using turtle commands in a programming language. It describes how to draw a square with 4 equal sides and right angles, a rectangle with 2 longer parallel sides and 2 shorter parallel sides, two triangles with 45 and 135 degree angles, a pentagon with 5 sides and angles of 75, 45, and 90 degrees resembling a house, a rhombus with 4 sides that was difficult to draw correctly, an octagon drawn by repeating the commands "fd 50 rt 45" 8 times, and a random pattern using circles moving left and right without specific commands. The document was created by Ellie Ruggero from class 5B.
Rube goldberg reflection
Our group had to design a Rube Goldberg machine for a class project that was at least four simple machines long. We were given cardboard and other materials to use to build a contraption that would use a sequence of events to accomplish the simple task of turning on a light switch. The biggest challenge was getting a gummy bear to flick a pool ball high enough as part of the chain reaction, so we adjusted our design to have the pool ball fall from a higher point instead.
Microworlds evie
Evie explored various shapes and patterns using a microworld program. She created squares, rectangles, triangles, pentagons, quadrilaterals, hexagons, and her own pattern. For each shape, she described the pattern used to generate it and key properties, such as the number of sides and whether the sides and angles were equal or different.
Rube goldberg machine by Reuben
This Rube Goldberg machine was made by Xavier and Bailey to complete a school task. It had to include at least as many simple machines as group members and steps, fit in a cardboard box, and perform an action.
Their initial design was too simple so they redesigned it. It starts with a toy car rolling down a ramp to hit a lever pulling a matchbox car to hit a pencil releasing a pullback car. This hits a lever flipping dominos up stairs turning on a fan when the last domino hits a weight attached to the fan dial. Despite challenges, their machine was the only one that moved energy uphill, and they were pleased with their problem-solving and final design.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
More Related Content
More from Yr05
Camp reflection
Gus Harris reflects on his experiences at camp, including going down the giant slide which he was excited for. He found the flying fox, where campers zip line through the air, to be one of the best moments as it was scary but fun, especially braking at the end. Dance nights were also a favorite where the campers had fun dancing to many songs. However, Gus's overall favorite moment was going down the flying fox for the first time despite initial fear, finding it to be a thrilling experience.
Camp reflection
Gus Harris reflects on his experiences at camp, including going down the giant slide which he was excited for. He found the flying fox, where campers zip line through the air, to be one of the best moments as it was scary but fun, especially braking at the end. Dance nights were also a favorite where the campers had fun dancing to many songs. However, Gus's overall favorite moment was going down the flying fox for the first time despite initial fear, finding it to be a thrilling experience.
Camp reflection
Gus Harris reflects on his experiences at camp, including going down the giant slide which he was excited for. He found the flying fox, where campers zip line through the air, to be one of the best moments despite initial fear, enjoying the thrill and fun break at the end. Dance nights were also a favorite, with lots of dancing to many fun songs that got everyone excited. However, his absolute favorite moment was overcoming his scare to experience the enjoyment of zipping down the flying fox.
Maker day term 3
On Maker Day, the students participated in hands-on engineering activities divided into three sessions. In the first session, Aimee and her partner Samantha built racing cars out of materials provided, drilling holes and assembling wheels, motors, and other parts. Aimee had to leave this activity early for a music lesson. Her second activity was building solar boats, where she joined a group that attached solar panels, motors, and propellers to test how the boats moved in water. At the end, the classes reflected on their experiences building the machines.
Camp
1) The document describes a camper's first few days at camp, including getting to know their cabin mates, enjoying delicious food, and having a shower on the first day.
2) On the second day, the camper participated in trust and initiative activities with their group. This included walking up a large hill and completing a challenging rope swinging task that required teamwork to get all group members on a small platform.
3) After overcoming difficulties through perseverance and different strategies, the group was able to complete the rope swinging task, making the camper proud of their accomplishment and learning that keeping trying leads to success.
A history of robots
The document provides a history of robots from ancient visions to modern achievements. It discusses early concepts and designs from Greek philosophers and inventors. The first modern robots were industrial machines in the 1960s that performed repetitive, dangerous tasks. Today's robots are more advanced and can have sensors to make decisions to complete complex tasks like packaging or military rescue operations. The document traces the progression of robot technology from simple machines to modern humanoid designs that mimic human abilities.
A History of Robots
The document provides a history of robots from ancient visions to modern achievements. It discusses early robotic concepts and inventions from Greek and Roman engineers. The first modern robots were industrial machines introduced in the 1960s that could perform repetitive, dangerous tasks. Today's robots are more advanced and can have sensors, control systems, and effectors that allow them to operate autonomously and assist humans in tasks that are difficult, risky, or time-consuming such as packaging items on an assembly line. The military has also developed robots to help with dangerous disposal and rescue missions.
Jesse rube goldberg machines reflection
The document describes the process of designing and building a Rube Goldberg machine over multiple sessions. It discusses the initial design plans, including required elements and rules. Key parts of the machine were then constructed, such as a marble run, pulley, and funnel. Modifications were made throughout the process, like adding a seesaw and gears. After modifications, the machine was tested and worked after several attempts. The final working machine had over 25 steps, from pushing a block to ringing a bell. Filming and editing was also done to create a movie documenting the machine.
Jesse's geometry through micro worlds
The document describes several programs created in MicroWorlds to generate different geometric shapes. The programs use variables, loops, and conditional statements to manipulate a turtle to draw the shapes. One program draws a star by repeating a section that increases the turtle's forward distance and changes its color. Another creates a disco bowling ball by calling a separate "turn" program and repeating a loop to draw concentric circles in different colors. A third makes a pinwheel with petals of a specified size by dividing 360 degrees by the number of petals.
Henry's shapes and angles
The document provides examples of code used to generate different shapes in the MicroWorlds programming environment. It demonstrates how to create squares, rectangles, triangles, pentagons, trapezoids, and patterns using the basic commands of fd, bk, rt, lt, and repeat. Key points made include that a square is a type of rectangle with all sides equal, and how to vary the side lengths and angles to generate different shapes like scalene triangles and trapezoids. Examples are given of combining shapes to make a house and using multiple turtles to create colored patterns.
Emmy's microworlds presentation
This document contains summaries of shapes and patterns created using the Microworlds programming environment. It discusses using repeat commands to more concisely create squares, rectangles, triangles, pentagons, quadrilaterals, and patterns. Specific formulas are provided for shapes like an equilateral triangle, trapezium, and a flower pattern made from repeating circles.
RGM refection
1. Emily, Jade, Clara, and Tilly built a Rube Goldberg machine using a cardboard tube, dominoes, a toy train, matchbox car, crochet ball, wooden wedge, and hole puncher to punch a piece of paper.
2. They went through several design changes before settling on using the hole puncher, and encountered problems like levers not working properly that they had to solve.
3. They incorporated four simple machines - an inclined plane, wedge, lever, and wheel and axle. The machine worked on their second try and they learned that perseverance leads to success.
Turtle shapes and commands on micro worlds!
This document provides instructions and summaries for drawing different shapes using turtle commands in a programming language. It describes how to draw a square with 4 equal sides and right angles, a rectangle with 2 longer parallel sides and 2 shorter parallel sides, two triangles with 45 and 135 degree angles, a pentagon with 5 sides and angles of 75, 45, and 90 degrees resembling a house, a rhombus with 4 sides that was difficult to draw correctly, an octagon drawn by repeating the commands "fd 50 rt 45" 8 times, and a random pattern using circles moving left and right without specific commands. The document was created by Ellie Ruggero in Class 5B.
Emmy's rube goldberg machine
The student was tasked with building a Rube Goldberg machine that performs a simple task for a school project. The machine had to fit within a specific size box and include a certain number of simple machines based on group size. The group of four students designed a machine over eight weeks that would turn a page in a book and place a lid on a bin. It was to use elements like a marble run, domino path, pulley system, and catapults. Building challenges arose from limited materials, but the students persevered and got their machine working, though it required modifications to elements like replacing catapults with wedges and inclined planes. In the end, they evaluated it as a successful project that they enjoyed creating
Rube goldberg reflection
Our group had to design a Rube Goldberg machine for a class project that was at least four simple machines long. We were given cardboard and other materials to use to build a contraption that would use a sequence of events to complete a simple task, such as turning on a light switch. Our biggest challenge was getting a pool ball to land in the right spot after being flicked by a gummy bear, so we adjusted our design to have the pool ball fall from a higher point.
Henry's shapes and angles
This document contains code examples and explanations for creating different shapes and patterns in the MicroWorlds programming environment. It demonstrates how to create basic shapes like squares, rectangles, triangles, pentagons, and trapezoids using different combinations of forward, backward, turn commands and repeating segments. More complex examples show how to combine multiple shapes to make a house and pattern designs using multiple turtles. Key concepts covered include using repeats and parameters to efficiently generate shapes, properties that define different quadrilateral and triangle types, and how to structure code to create scenes with multiple objects.
Turtle shapes and commands on micro worlds!
This document provides instructions and summaries for drawing different shapes using turtle commands in a programming language. It describes how to draw a square with 4 equal sides and right angles, a rectangle with 2 longer parallel sides and 2 shorter parallel sides, two triangles with 45 and 135 degree angles, a pentagon with 5 sides and angles of 75, 45, and 90 degrees resembling a house, a rhombus with 4 sides that was difficult to draw correctly, an octagon drawn by repeating the commands "fd 50 rt 45" 8 times, and a random pattern using circles moving left and right without specific commands. The document was created by Ellie Ruggero from class 5B.
Rube goldberg reflection
Our group had to design a Rube Goldberg machine for a class project that was at least four simple machines long. We were given cardboard and other materials to use to build a contraption that would use a sequence of events to accomplish the simple task of turning on a light switch. The biggest challenge was getting a gummy bear to flick a pool ball high enough as part of the chain reaction, so we adjusted our design to have the pool ball fall from a higher point instead.
Microworlds evie
Evie explored various shapes and patterns using a microworld program. She created squares, rectangles, triangles, pentagons, quadrilaterals, hexagons, and her own pattern. For each shape, she described the pattern used to generate it and key properties, such as the number of sides and whether the sides and angles were equal or different.
Rube goldberg machine by Reuben
This Rube Goldberg machine was made by Xavier and Bailey to complete a school task. It had to include at least as many simple machines as group members and steps, fit in a cardboard box, and perform an action.
Their initial design was too simple so they redesigned it. It starts with a toy car rolling down a ramp to hit a lever pulling a matchbox car to hit a pencil releasing a pullback car. This hits a lever flipping dominos up stairs turning on a fan when the last domino hits a weight attached to the fan dial. Despite challenges, their machine was the only one that moved energy uphill, and they were pleased with their problem-solving and final design.
More from Yr05 (20)
Recently uploaded
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
ScyllaDB monitoring provides a lot of useful information. But sometimes it’s not easy to find the root of the problem if something is wrong or even estimate the remaining capacity by the load on the cluster. This talk shares our team's practical tips on: 1) How to find the root of the problem by metrics if ScyllaDB is slow 2) How to interpret the load and plan capacity for the future 3) Compaction strategies and how to choose the right one 4) Important metrics which aren’t available in the default monitoring setup.
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
These are the slides for the presentation, "Component Testing: Bridging the gap between frontend applications" that was presented at QA or the Highway 2024 in Columbus, OH by Zachary Hamm.
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Containers & AI - Beauty and the Beast!?!
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Keywords: AI, Containeres, Kubernetes, Cloud Native
Event Link: https://meine.doag.org/events/cloudland/2024/agenda/#agendaId.4211
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
Introducing BoxLang : A new JVM language for productivity and modularity!
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
Discover the Unseen: Tailored Recommendation of Unwatched Content
The session shares how JioCinema approaches ""watch discounting."" This capability ensures that if a user watched a certain amount of a show/movie, the platform no longer recommends that particular content to the user. Flawless operation of this feature promotes the discover of new content, improving the overall user experience.
JioCinema is an Indian over-the-top media streaming service owned by Viacom18.
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
GlobalLogic Java Community Webinar #18 “How to Improve Web Application Perfor...
Під час доповіді відповімо на питання, навіщо потрібно підвищувати продуктивність аплікації і які є найефективніші способи для цього. А також поговоримо про те, що таке кеш, які його види бувають та, основне — як знайти performance bottleneck?
Відео та деталі заходу: https://bit.ly/45tILxj
Recently uploaded (20)
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
Introducing BoxLang : A new JVM language for productivity and modularity!
Introducing BoxLang : A new JVM language for productivity and modularity!
Discover the Unseen: Tailored Recommendation of Unwatched Content
Discover the Unseen: Tailored Recommendation of Unwatched Content
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
GlobalLogic Java Community Webinar #18 “How to Improve Web Application Perfor...
GlobalLogic Java Community Webinar #18 “How to Improve Web Application Perfor...
My understanding of microworlds
- 1. My understanding of microworlds By Rory Kearns
- 2. Square Procedure: repeat 4 [fd 50 rt 90] Forward fifty pixels, right turn 90 degrees four times= a square
- 3. Rectangle Procedure: repeat 2 [ fd 50 rt 90 fd 100 rt 90] Forward fifty pixels, right turn 90 degrees two times
- 4. Triangle (scalene and equilateral) procedure: repeat 3 [rt 120 fd 50] Right turn 120 degrees forward fifty pixels 3 times
- 5. Triangle (equilateral) procedure: pd fd 100 rt 120 fd 50 rt 90 fd 85 Pen down forward 100 pixels right turn 120 degrees forward 50 pixels right turn 90 degrees forward 85 pixels
- 6. parallelogram Procedure: repeat 4 [fd 50 rt 80 fd 50 rt 100] Forward fifty pixels right turn 80 degrees fd 50 rt 100 four times
- 7. vortex repeat 100 [pd repeat 11 [rt 32.727272 fd 50]] Pen down do eleven times rt 32.727272 forward fifty pixels 100 times
- 8. Pentagon Procedure: repeat 5 [rt 70 fd 50] right turn 70 degrees forward 50 pixels 5 times
- 9. dodecagon Procedure:repeat 12 [rt 30 fd 50] right turn 30 degrees forward 50 pixels 12 times