Downloaded 12 times
Multiport valve
- 1. Multiport Flow Selector CompactAnd Economical Production Test Manifold
- 2. Design and Construction EmersonProcess Management – Valve Automation is a recognized leader in oil and gas flow automation solutions. The Bettis Multiport Flow Selector is the latest concept and the preferred choice in production test manifold design. The Multiport Flow Selector is compact, economical and reliable. Emerson Process Management – Valve Automation provides a broad product offering of automation and control solutions for the oil and gas industry. For more than 55 years, hydrocarbon producers have relied upon the Bettis product brand as an added assurance of safety, reliability and performance. Bettis innovations have set the brand apart and provided our clients with savings in both time and money. The Bettis Multiport Flow Selector (MPFS) provides a cost effective and compact means to improve production management and well optimization. The MPFS allows the selecting and diverting of well fluids from an individual well to a single test outlet, flow loop or sampling device. Connecting up to seven flow lines, the Multiport Flow Selector allows the combined fluids to flow through a separate group outlet, while simultaneously isolating any single well for testing. The unique flow selector is ideal for a variety of oil, gas and process applications and can be used either as a standalone device or with a multiphase meter. The MPFS can also be used for water injection for Enhanced Oil Recovery (EOR) projects. It provides control simplicity in an environment where size, weight and reliability are all key factors. The Multiport Flow Selector reduces the costs of installation, operation and maintenance of the well test system throughout its life cycle. Multiport Flow Selector Application And Features • More compact than either conventional two-way or three-way valve manifolds • Reduces number of isolation valves in production/test manifolds • Available with a multitude of trims and surface treatments for all operating environments • Available with two-wire communication for remote control and status indication • Reduced installation, operating and maintenance costs • Fitted with Bettis Multiport Control Actuator (MPA) • Field adjustable seal/seat with various materials for adverse service conditions • Operating temperature range: -20°F to +392°F (-29°C to +200°C)
- 3. Assembly and Features Fiveavailable sizes with multiple ANSI pressure ratings Size ANSI Class 150 300 600 900 1500 2500 2 x 4 X X X X 3 x 6 X X X X X 4 x 8 X X X X 4 x 10 X X 6 x 16 X X X X X X Model designations as follows: A x B ANSI rating, where; A = Well inlet/test outlet internal diameters (inches) B = Group outlet internal diameter (inches) Commercial Benefits Initial Purchase/Commissioning - Reduced number of valves - Reduced piping costs - Reduced automation costs - Reduced wiring costs - Reduced maintenance costs - Reduced skid weight and size Ownership/Maintenance - Reduced operating costs - Reduced parts cost - Reduced downtime - Reduced labor Vent Plug Well Inlet (1 of 7) Group Outlet Plug Seal Bettis Actuator Bonnet Lower Plug Seal O-Ring and Back-up Upper Plug Seal O-Ring and Back-up Test Outlet MSM Skid Assembly Inlet Flow lines (1 of 8) MPFS Test Outlet
- 4. The Bettis MultiportActuator (MPA) is an electronic system specifically designed to control and monitor the operation of the Multiport Flow Selector. It combines an exclusive solid state motor starter with control software to provide precise positioning of the Multiport Flow Selector within +/- one degree of the selected port, retaining that position even in the event of a power loss. The Multiport Actuator features include: Control Knob Home Port LED (On within 0.25° of home port) Over Torque LED (flashes when configured torque exceeded) Torque Display (15-99% torque displayed or port no.) Run LED (Red while running, Green within 2° of port) Port LED (Green when within 1°, Red within 2° of port) Alarm (Yellow flashes in alarm) Selector Knob Combined LOR Selector Integral Disconnect Electrical Enclosure Bettis 3000 Gearbox 4-Pole Motor Local Display Module (LDM) Manual Override Position Encoder • Certified explosion proof – Class I, Div I, Groups C & D – EEx d IIB T4 • Operating temperature range: – 58°F to +149°F (-50°C to +65°C) • Heavy duty gearbox with capacity of 3000 ft lbs • Wide range of 4-pole motors available for any voltage or torque • Configurable for MPFS from 3 to 8 ports • 12-bit encoder coupled directly to valve stem for position feedback • Precise motor control with microcontroller updates every 1 mS • Supports network protocols including Modbus, Modbus TCP/IP, Profibus DP, FOUNDATION™ fieldbus, DeviceNet and Ethernet • I/O and alarm monitoring • Dual configuration – factory or user setup Bettis Multiport Actuator (MPA)
- 5. Modular Versatility Multiport Flow Selectorsare less expensive than conventional manifolds in both initial purchase and ownership costs. MPFS can be installed as standalone or with a test separator or multiphase meter. Multiport Flow Selectors typically amortize the cost of automation over fewer than seven wells. Historically, connecting individual production wells or flowlines to a test separator required a multitude of valves that had to be opened by hand. In addition to the valves and shutoff devices, the system required considerable piping. The conventional two-way or three-way systems cost more initially, required higher operating costs, needed more maintenance and downtime and added to the personnel risks. The Multiport Flow Selector, with automated actuated control, is safer, less expensive, lighter weight and more compact than conventional systems. Requires 21 separate manual or actuated valves with associated piping Only requires seven valves Conventional 7-Well, Two-Way Valve Manifold Bettis Multiport Flow Selector Manifold • Less piping • More compact • Fewer control points Well 1 Well 2 Well 3 Well 4 Well 5 Well 6 Well 7 To Test Separator ToProduction • Less expensive • Less weight (especially critical for offshore applications) Well 1 Well 2 Well 3 Well 4 Well 5 Well 6 Well 7 ToProduction To Test Separator
- 6. DOC.6P.MFS.US Rev F06-15 www.emersonprocess.com/bettis ©2015 Emerson Process Management. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Bettis™ is a mark of one of the Emerson Process Management family of companies. All other marks are property of their respective owners. World Area Configuration Centers (WACC) offer sales support, service, inventory and commissioning to our global customers. Choose the WACC or sales office nearest you: NORTH & SOUTH AMERICA 19200 Northwest Freeway Houston, TX 77065 USA T +1 281 477 4100 F +1 281 477 2809 Av. Hollingsworth, 325, Iporanga Sorocaba, SP 18087-105 Brazil T +55 15 3238 3788 F +55 15 3228 3300 ASIA PACIFIC No. 9 Gul Road #01-02 Singapore 629361 T +65 6501 4600 F +65 6268 0028 No. 1 Lai Yuan Road Wuqing Development Area Tianjin 301700 P. R. China T +86 22 8212 3300 F +86 22 8212 3308 MIDDLE EAST & AFRICA P. O. Box 17033 Dubai United Arab Emirates T +971 4 811 8100 F +971 4 886 5465 P. O. Box 10305 Jubail 31961 Saudi Arabia T +966 3 340 8650 F +966 3 340 8790 24 Angus Crescent Longmeadow Business Estate East P.O. Box 6908; Greenstone; 1616 Modderfontein, Extension 5 South Africa T +27 11 451 3700 F +27 11 451 3800 EUROPE Asveldweg 11 7556 BR Hengelo (O) The Netherlands T +31 74 256 1010 F +31 74 291 0938 For complete list of sales and manufacturing sites, please visit www.emersonprocess.com/valveautomationlocations Or contact us at info.valveautomation@emerson.com