This document provides specifications for three active studio monitor speakers - Models Solution.5, Solution.6, and Solution.8 - and one active subwoofer, Model Solution.10BS. The speakers are 2-way nearfield monitors with soft dome tweeters and Kevlar cone woofers, powered by bi-amplification, and include controls for levels and volume. The subwoofer is a 10-inch powered bass reflex design with a 200W amplifier and variable crossover and phase controls. Detailed specifications are given for the driver components, frequency response, power output, connections, and physical dimensions of each model.
1. The Resolution! The sound & Music!The Resolution! The sound & Music!
Powered studio monitor speaker series
2. Model: Solution.5
Configuration: 2‐way near‐field studio monitor
S A i M i (Bi A )System type: Active Monitor (Bi‐Amp)
HF Driver : 1.25 Inch soft‐dome tweeter
LF Driver : 5‐1/4 Inch Kevlar curved cone with high temperature voice coil and damped rubber surround
Frequency Response : 56Hz ~ 22kHz q y p
Crossover Freq.: 3.19kHz
HF Power :30 Watts
LF Power : 40 Watts
Peak SPL : 110 dB
Signal to Noise Ratio : 100dB typical A‐Weighted
Input Impedance :20 kΩ balanced, 10 kΩ unbalanced
Polarity :Positive signal at + input produce outward LF cone displacementPolarity :Positive signal at + input produce outward LF cone displacement
Input Connectors: RCA unbalanced input connector
1/4" TRS balanced/unbalanced input connector
XLR balanced input connector
Controls : HF Level Adjust : (‐2dB,‐1dB,0dB,+1dB)
LF Level Adjust : (‐2dB,‐1dB,0dB,+2dB)
Main Volume level: (‐30dB to +6dB)
I di t (LED) P / ffIndicator(LED) : Power on/off
Fuse Rating : Slow blow type , 100V ~120V T2.0AL ; 220V ~ 240V T1.0AL
Cabinet: Vinyl laminated high‐accoustic‐efficiency 3/4" MDF with accurate acoustic waveguide
Magnetic Shielding : Yes
Dimension: (D x W x H) 7.9" x 6.9" x 9.8" (200 x 176 x 250mm)
Weight. Net. 13.0lbs (5.9kg)
3. Model: Solution.6
Configuration: 2‐way near‐field studio monitor
System type: Active Monitor (Bi‐Amp)
HF Driver : 1.25 Inch soft‐dome tweeter
LF Driver : 6.5 Inch Kevlar curved cone with high temperature voice coil and damped rubber surround
Frequency Response : 45Hz ~ 27kHzFrequency Response : 45Hz 27kHz
Crossover Freq.: 3.19kHz
HF Power :25 Watts
LF Power : 60 Watts
Peak SPL : 111 dB
Signal to Noise Ratio : 100dB typical A‐Weighted
Input Impedance :20 kΩbalanced, 10 kΩ unbalanced
Polarity Positive signal at + input produce outward LF cone displacementPolarity : Positive signal at + input produce outward LF cone displacement
Input Connectors: RCA unbalanced input connector
1/4" TRS balanced/unbalanced input connector
XLR balanced input connector
Controls : HF Level Adjust (‐2dB,‐1dB,0dB,+1dB)
LF Level Adjust (‐2dB,‐1dB,0dB,+2dB)
Main Volume level (‐30dB to +6dB)
Indicator(LED) : Power on/off
Fuse Rating : Slow blow type , 100V ~120V T2.0AL ; 220V ~ 240V T1.0AL
Cabinet: Vinyl laminated high‐accoustic‐efficiency 3/4" MDF with accurate acoustic waveguide
Magnetic Shielding : YesMagnetic Shielding : Yes
Dimension: (D x W x H) 10" x 8.9" x 13.1" (259 x 225 x 330mm)
Weight. Net. 18.5lbs (8.4kg)
4. Model: Solution.8
Configuration: 2‐way near‐field studio monitor
System type: Active Monitor (Bi‐Amp)
HF Driver : 1.25 Inch soft‐dome tweeter
LF Driver : 8 Inch Kevlar curved cone with high temperature voice coil and damped rubber surround
Frequency Response : 35Hz ~ 27kHzFrequency Response : 35Hz 27kHz
Crossover Freq.: 2.0kHz
HF Power :25 Watts
LF Power : 70 Watts
Peak SPL : 114 dB
Signal to Noise Ratio : 100dB typical A‐Weighted
Input Impedance :20 kΩ balanced, 10 kΩ unbalanced
Polarity Positive signal at + input produce outward LF cone displacementPolarity :Positive signal at + input produce outward LF cone displacement
Input Connectors: RCA unbalanced input connector
1/4" TRS balanced/unbalanced input connector
XLR balanced input connector
Controls : HF Level Adjust (‐2dB,‐1dB,0dB,+1dB)
LF Level Adjust (‐2dB,‐1dB,0dB,+2dB)
Main Volume level (‐30dB to +6dB)
Indicator(LED) : Power on/off
Fuse Rating : Slow blow type , 100V ~120V T2.0AL ; 220V ~ 240V T1.0AL
Cabinet: Vinyl laminated high‐accoustic‐efficiency 3/4" MDF with accurate acoustic waveguide
Magnetic Shielding : YesMagnetic Shielding : Yes
Dimension: (D x W x H) 11.2" x 12.0" x 16.25" (285 x 304 x 413mm)
Weight. Net. 24.6lbs (11.2kg)
5. Model Solution.10BS
Configuration Bass‐reflex active powered subwoofer
System type Active Monitor Subwoofer
Woofer Driver
10 Inch composite (treated paper/Kevlar) cone with high temperature voice coil and damped
rubber surround
Frequency Response 35Hz ~ 200Hz
Crossover Freq. HP/LP linked filter switchable from 50‐200Hz ; 24dB/Octave 4th‐order alignment
Input Sensivity 85mV pink noise produces 100dBa output SPL at one meter with volume control at maximum
Amplifier Class A/B design, 200 Watts rating power at 4 ohm,
Peak SPL 110 dB Music and 113dB Peak
Signal to Noise Ratio 86dB (A‐Weighted)
T.H.D. at rated power 0.08%
Input Impedance 20 KΩ balanced, 10 KΩ unbalanced
Input Connectors Two RCA unbalanced input connectors
Two 1/4" TRS balanced/unbalanced input connectors
Two XLR balanced input connectorsTwo XLR balanced input connectors
Controls Volume/Gain control; variable crossover and phase control;
Indicator Power on (Blue), Standby (red)
Power Input Dual voltage(selectable switch) detachable grounded IEC power socket and cablep g ( ) g p
100V‐120V/ ~50/60Hz , 4.0A‐250V , low blow type fuse
220V‐240V/ ~50/60Hz 2.0A‐250V, low blow type fuse
Cabinet Vinyl laminated 3/4" MDF .
Dimensions(H x W x D) 15" x 14" x 16‐1/16"
Weitht. Net. 40.2lbs (18.24kg)