The document is a letter from Engineers Australia assessing an individual's qualifications and skilled employment history for migration purposes. It determines that the individual's electrical engineering degree from Auckland University of Technology meets the requirements for an electrical engineer. It also assesses 7 years of overseas skilled employment as a metering engineer in Fiji as relevant to the assessment outcome. The assessment does not verify any claims made and final determination is at the discretion of immigration authorities.
Certificate IV in Electrical Instrumentation gives an understanding of Calibration and Commissioning of Pressure, Level, Density, Flow and Temperature Transmitters. It allows you to connect transmitters to PLC and program a sequence to control them according to the logic in the Ladder diagram.
Learn more about the course here:https://www.ausinet.com.au/cert-4-in-instrumentation-darwin/
Certificate III in Instrumentation and Control provides competencies to select, install, set up, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control.
To learn more about the course: https://www.ausinet.com.au/cert-3-instrumentation-darwin/
This qualification provides competencies to develop, select, install, commission, maintain and diagnose faults/malfunctions on electrical, instrumentation and control equipment and systems.
It includes ERAC requirements for an Electricians Licence.
On completion of this course, you will receive a Nationally recognised qualification.
learn more about the course here: https://www.ausinet.com.au/diploma-in-instrumentation-brisbane/
Certificate IV in Electrical Instrumentation gives an understanding of Calibration and Commissioning of Pressure, Level, Density, Flow and Temperature Transmitters. It allows you to connect transmitters to PLC and program a sequence to control them according to the logic in the Ladder diagram.
Learn more about the course here:https://www.ausinet.com.au/cert-4-in-instrumentation-darwin/
Certificate III in Instrumentation and Control provides competencies to select, install, set up, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control.
To learn more about the course: https://www.ausinet.com.au/cert-3-instrumentation-darwin/
This qualification provides competencies to develop, select, install, commission, maintain and diagnose faults/malfunctions on electrical, instrumentation and control equipment and systems.
It includes ERAC requirements for an Electricians Licence.
On completion of this course, you will receive a Nationally recognised qualification.
learn more about the course here: https://www.ausinet.com.au/diploma-in-instrumentation-brisbane/
Requirements to Become ICT Quality Assurance Engineer 263211.pptxRPL For Australia
Becoming an ICT Quality Assurance Engineer (263211) in Australia requires meeting certain requirements, including the ACS IT Skill Assessment. By fulfilling the educational qualifications, showcasing relevant work experience, and meeting the English language proficiency criteria, individuals can increase their chances of recognition and enhance their employability prospects in the dynamic field of ICT.
Dear Sir
I am on Visit Visa in Dubai.I am looking for a job Relevant to my field as well as my Area of Interest.I am B.Tech in Electrical Technology and looking for job.
I am also done a B.Tech in ( Electrical Technology ) 2011 pass-out, from Abasyn University, Peshawar, Affiliated to HEC, Islamabad
To carry on my passion for Renewable Energy by working as Solar Sales Consultant in a group of highly skilled individuals dedicated to developing the next Generation of Alternate Energy.
Here by i do attach a copy of my resume for your kind reference.
Regards,
Muhammad Amjad
Excellence Awards Judging- Thank You and Congratulations!Vijayananda Mohire
Received a letter from CEO, Engineers Australia, for being appointed to the post of a Panel Judge for a two years period. This is a position to judge the people or projects to enable fair and justifiable grant of awards under various categories.
Mohitesh Sharma - Engineers AU - Skills & Qualification Varification
1. All above advice is based on evidence as submitted, and the assessment does not constitute an opinion as to the veracity of claims made. Determination of points under
the skilled migration points test remains at the discretion of delegated officers of the Department of Immigration and Border Protection.
All assessment letters issued electronically can be verified by using our Outcome Verification Service available on Engineers Australia's website.
Engineers Australia
Engineering House, 11 National Circuit, Barton, ACT, 2600
Phone +61 2 6270 6555 | email: memberservices@engineersaustralia.org.au | web: www.engineersaustralia.org.au
1 of 1
EA ID: 5289704
Application ID: 34898
18 July 2016
Mr Mohitesh Sanjay Sharma
C/- Mohitesh Sharma [Metering Engineer]
Fiji Electricity Authority
2 Marlow Street
Suva Central +679
FIJI
Dear Mr Sharma,
Thank you for your Migration Skills Assessment Accredited Qualification application.
Engineers Australia is pleased to advise that your qualification from the following institution:
Institution Completed/Awarded Date
Auckland University of Technology (NZ) Awarded February 2009
meets the current requirement for the following occupation:
Occupational Classification ANZSCO Skill Level Occupation ANZSCO Code Date
Professional Engineer Skill Level 1 Electrical Engineer 233311 February
2009
Highest Relevant Qualification
Your qualification obtained from the below institution has been assessed as comparable to the listed
Australian Qualification Framework (AQF) level for the purposes of awarding points under the General
Skilled Migration points test:
Institution Completed / Awarded Date AQF Level
Auckland University of Technology
(NZ)
Awarded February 2009 Bachelor Honours Degree
Relevant Skilled Employment Assessment
Engineers Australia advises the following period of skilled employment has been assessed and
determined relevant in support of your assessment outcome:
Relevant Australian Skilled Employment Relevant Overseas Skilled Employment
- Nil - June 2009 to July 2016
Yours sincerely,
Dr Stacy Oerder
Qualifications Assessor, Engineers Australia