RESUME
 Objective:
 To pursue a highly challenging career in the aeronautical / mechanical
engineering field, and work closely with a team of highly experienced
professionals, to enable myself to grow along with the firm, and prefer to work
in company with a reputable organization, where knowledge and experience
can be utilized in a professional way.
 Education:
 B.Sc. in Aeronautical Engineering , Jordan University of Science and
Technology, Irbid, Jordan [2007-2013]
 Experience:
 Colleges training in The King Abdullah II Design and Development Bureau
(KADDB) –2013 (2 months).
 Shops & CAMO training at Jordan Aircraft Maintenance Limited
(JorAMCo) – 2013 (6 months).
 Service Engineer - Aircraft Structure Engineer at Jordan Aviation
Airline – 11 October, 2014 to Present:
- Analyzing, investigating and provide repair solutions of structural damage and repair
data (structure metallic and composite).
- Work closely with Boeing and Airbus Structure Repair Team to provide damage
reports and proposing any repairs methods for any damages out of defined allowable
limits in SRM, SB etc.
- Responsible to liaise, discuss on technical matters with the manufacturer and other
OEM’s for assessment and repair of structural damage.
Mohammad Abu khalaf
Technical Service Engineer / Aircraft Structure
Cell Phone: +962777066354, +962799478402
E- mail: eng.mmzghoul@yahoo.com
Address: Amman - Jordan
Nationality: Jordanian
Marital status: Single
Place and date of birth: Zarqa, June 21th
, 1989
- Liaise and discuss on technical matters with customer, vendors and all other internal
departments in regards to assigned responsibility
- Provide technical advice to maintenance engineers related to aircraft structures or
associated equipment for out-of-scope damages, in consultation with the OEM.
- Evaluate upgrades for aircrafts (via Service Bulletins) from Boeing, Airbus or any
OEMs, and recommends incorporation.
- Monitor Airworthiness Directives from EASA and FAA, evaluate and ensure timely
compliance.
- Perform responsibilities for Continued Airworthiness and Technical Support tasks
related, Airframes, aircraft structures or Components as required
- Monitoring and participate in Boeing 737, 767 and A320 aircraft weighing and
prepare the weighing report.
- Prepare and check engineering documents such as Engineering Order, drawing and
etc.
- Responsible for monitoring and evaluation of defects in order to ensure correct
troubleshooting and defect clearance.

 Courses and Certificates:
 A training course in Matlab with the Consultative Center for Science and Technology (CCST)
at JUST.
 A training course in Aircraft Maintenance with the Consultative Center for Science and
Technology (CCST) at JUST.
 Human Factor, ETOPS, RVSM and Fuel Tank Safety Courses.
 Structure Repair for Engineer courses with Boeing.
 Weight and Balance courses with Boeing.

 Skills and abilities:
- MS Office Tools, ANSYS , Pro-engineer , Microsoft project and MatLab, and
Internet skilled user
- Ability to work under pressure, and handle multi tasks.
- Self-motivated, reliable and confident in working individually or as part of a
team with high degree of Commitment and team work spirit.
- Fast learner and always seek to expand my knowledge
- Key Responsibilities:
o To follow my trainers and learn as much as possible from them.
o Working in a team work environment.
o To proof myself and get the self-confidence.
- Languages:
o Arabic is my mother language.
o English: Good conversation, excellent writing, excellent reading.

 References
Mohammad Ali Zghoul
Job Title: Servicr Engineering Manager
Company Name: JorAMCO
Phone Number: +962.797500593
Email Address:mzghoul@joramco.com.jo
Yousef Bedour
Job Title: Team Leader / System engineer
Company Name: Jordan Aviation Airline
Phone Number: +962.776887579
Email Address: yousef.bedour@jordanaviation.jo

Mohammad abu khalaf cv

  • 1.
    RESUME  Objective:  Topursue a highly challenging career in the aeronautical / mechanical engineering field, and work closely with a team of highly experienced professionals, to enable myself to grow along with the firm, and prefer to work in company with a reputable organization, where knowledge and experience can be utilized in a professional way.  Education:  B.Sc. in Aeronautical Engineering , Jordan University of Science and Technology, Irbid, Jordan [2007-2013]  Experience:  Colleges training in The King Abdullah II Design and Development Bureau (KADDB) –2013 (2 months).  Shops & CAMO training at Jordan Aircraft Maintenance Limited (JorAMCo) – 2013 (6 months).  Service Engineer - Aircraft Structure Engineer at Jordan Aviation Airline – 11 October, 2014 to Present: - Analyzing, investigating and provide repair solutions of structural damage and repair data (structure metallic and composite). - Work closely with Boeing and Airbus Structure Repair Team to provide damage reports and proposing any repairs methods for any damages out of defined allowable limits in SRM, SB etc. - Responsible to liaise, discuss on technical matters with the manufacturer and other OEM’s for assessment and repair of structural damage. Mohammad Abu khalaf Technical Service Engineer / Aircraft Structure Cell Phone: +962777066354, +962799478402 E- mail: eng.mmzghoul@yahoo.com Address: Amman - Jordan Nationality: Jordanian Marital status: Single Place and date of birth: Zarqa, June 21th , 1989
  • 2.
    - Liaise anddiscuss on technical matters with customer, vendors and all other internal departments in regards to assigned responsibility - Provide technical advice to maintenance engineers related to aircraft structures or associated equipment for out-of-scope damages, in consultation with the OEM. - Evaluate upgrades for aircrafts (via Service Bulletins) from Boeing, Airbus or any OEMs, and recommends incorporation. - Monitor Airworthiness Directives from EASA and FAA, evaluate and ensure timely compliance. - Perform responsibilities for Continued Airworthiness and Technical Support tasks related, Airframes, aircraft structures or Components as required - Monitoring and participate in Boeing 737, 767 and A320 aircraft weighing and prepare the weighing report. - Prepare and check engineering documents such as Engineering Order, drawing and etc. - Responsible for monitoring and evaluation of defects in order to ensure correct troubleshooting and defect clearance.   Courses and Certificates:  A training course in Matlab with the Consultative Center for Science and Technology (CCST) at JUST.  A training course in Aircraft Maintenance with the Consultative Center for Science and Technology (CCST) at JUST.  Human Factor, ETOPS, RVSM and Fuel Tank Safety Courses.  Structure Repair for Engineer courses with Boeing.  Weight and Balance courses with Boeing.   Skills and abilities: - MS Office Tools, ANSYS , Pro-engineer , Microsoft project and MatLab, and Internet skilled user - Ability to work under pressure, and handle multi tasks. - Self-motivated, reliable and confident in working individually or as part of a team with high degree of Commitment and team work spirit. - Fast learner and always seek to expand my knowledge - Key Responsibilities: o To follow my trainers and learn as much as possible from them. o Working in a team work environment. o To proof myself and get the self-confidence. - Languages: o Arabic is my mother language. o English: Good conversation, excellent writing, excellent reading.   References Mohammad Ali Zghoul Job Title: Servicr Engineering Manager Company Name: JorAMCO Phone Number: +962.797500593 Email Address:mzghoul@joramco.com.jo Yousef Bedour Job Title: Team Leader / System engineer Company Name: Jordan Aviation Airline Phone Number: +962.776887579 Email Address: yousef.bedour@jordanaviation.jo