Multi-Link’s Cell Signal Amplifier connects directly to any M2M enabled cellular application or cellular device and provides up to 15dB gain in uplink signal strength (e.g. a router, modem, module, or gateway).
The ML-CSA 3500 3G Cell Signal Amplifier is superior to other cell amplifiers & hi-gain antennas:
Passive Bypass Technology is a fail-safe feature that is designed to allow the cell signal amplifier to bypass itself during loss of power, when a fault is detected, or when amplification is not needed. NO other device has this feature and it’s vital for applications that are mission-critical for safety, security & liability reasons, e.g. Fire & Security Alarms and Patient Monitoring.
Auto Gain & Oscillation Control will automatically adjust the gain and output power to provide signal consistency if a signal anomaly occurs and to prevent interference with the Carrier’s network. If amplification is not needed, the booster goes into Passive Bypass Mode.
Variable Input Power Ranges: +8.0 to 36.0 VDC which is beneficial for applications with a variety of power requirements.
FCC & IC Certified and Carrier Pre-Approved
Powertxt Duo allows quick and easy remote power control of two connected devices through the 3G GSM (mobile) network. Commands are sent via SMS messaging and can
be used to control one or both power outlets in tandem or individually. Powertxt Duo will also send instant SMS alerts when on-site power has been lost or restored, so technicians can respond accordingly --- saving labor, money, and downtime.
The ML-CSA 3550 UL 3G Cell Signal Amplifier is a “Plug & Play” device that connects in-line with any M2M cell-enabled router, modem, module, or gateway. It enhances downlink and boosts UPLINK cell signal strength by up to 15dB to lock in data connections. Premier Uplink Connectivity is essential for M2M devices to connect to the cell tower for real-time monitoring & control.
The ML-CSA 3550 UL is certified and in compliance with UL 1610 Standard, making it
an essential component in wireless burglar alarm installations.
Multi-Link Product Line Card 2016 *RevisedScott Shelton
Founded in 1987, Multi-Link, Inc. is a USA-based manufacturer dedicated to the development and marketing of high quality telecommunications devices, including remote power control management, telephone line-sharing, and industrial grade POTS line and Ethernet wireless extenders. Our products are used by SOHOs to Fortune 500 companies, state and federal government agencies, and industry best VARs & datacom Integrators.
Used in a wide variety of commercial and government applications to improve communications and service efficiencies, Multi-Link customers have achieved millions of dollars in telecommunications and service costs savings, typically with an ROI in less than 90 days.
Powertxt Duo allows quick and easy remote power control of two connected devices through the 3G GSM (mobile) network. Commands are sent via SMS messaging and can
be used to control one or both power outlets in tandem or individually. Powertxt Duo will also send instant SMS alerts when on-site power has been lost or restored, so technicians can respond accordingly --- saving labor, money, and downtime.
The ML-CSA 3550 UL 3G Cell Signal Amplifier is a “Plug & Play” device that connects in-line with any M2M cell-enabled router, modem, module, or gateway. It enhances downlink and boosts UPLINK cell signal strength by up to 15dB to lock in data connections. Premier Uplink Connectivity is essential for M2M devices to connect to the cell tower for real-time monitoring & control.
The ML-CSA 3550 UL is certified and in compliance with UL 1610 Standard, making it
an essential component in wireless burglar alarm installations.
Multi-Link Product Line Card 2016 *RevisedScott Shelton
Founded in 1987, Multi-Link, Inc. is a USA-based manufacturer dedicated to the development and marketing of high quality telecommunications devices, including remote power control management, telephone line-sharing, and industrial grade POTS line and Ethernet wireless extenders. Our products are used by SOHOs to Fortune 500 companies, state and federal government agencies, and industry best VARs & datacom Integrators.
Used in a wide variety of commercial and government applications to improve communications and service efficiencies, Multi-Link customers have achieved millions of dollars in telecommunications and service costs savings, typically with an ROI in less than 90 days.
The MBR1000 includes both wired and wireless WAN interfaces to provide the ultimate flexibility in Internet connectivity for your enterprise. The Cradlepoint MBR1000 is the first 3G router of any kind with a native ExpressCard slot and WiFi/802.11 ‘N’ technology.
Designed for any type of M2M cell data collection and remote site equipment access, the ML-4G LTE CDS is a highly customizable communications system featuring a high speed 4G LTE gateway that is certified on all major US cellular networks. Improves reliability for cell communications and future proofs for later expansion needs.
WA211 Outdoor IEEE802.11a/n Wireless AP WoMasterWoMaster
WA211A and WA211B are the high performance IEEE 802.11a/n compliant waterproof outdoor (IP55) wireless access point with 2T2R MIMO data, rate up to 300Mbps and wireless coverage up to 2km. WA211 is equipped with 2 external 5dBi antennas, whilst WA211B has internal directional high power, high gain 13dBi antenna. The 5G + auto channel selection effectively prevents traffic congestion. The web-based utility brings easy and secure management and firmware upgrade. WA211 series is an ideal cost-effective high speed wireless communication solution with multiple operation modes for outdoor surveillance applications.
Communication that isn’t limited by time and place. No need for fixed lines or secondary networks. The Modula II GSM-R Call Station allows for operation even in remote areas, transferring voice and data communication via GSM-R networks.
The Modula II GSM-R is virtually unlimited.
Do you need to handle emergency calls, transmit data or control signals to a central station with guaranteed reliability? Do you need a mobile emergency call facility and information stations that can be put into operation at short notice?
Would you like to control and monitor disparate systems without fixed network connections?
All of these situations can be addressed by the Modula II GSM-R Call Station.
Wherever there is no landline connection and when it would be prohibitively expensive to lay a cable often an issue on the railways! The Modula II GSM-R call station offers the perfect solution.
Smart plug for home automation
* Direct remote control (BLE) of devices and appliances from Smartphone
* Control devices and appliances over internet with iTAS internet gateway
* EMR relay (230VAC, up to 15A)
* Schedule multiple timers and calendars to turn on/ off devices/ appliances
* Energy consumption measurement of the devices and appliances
The MBR1000 includes both wired and wireless WAN interfaces to provide the ultimate flexibility in Internet connectivity for your enterprise. The Cradlepoint MBR1000 is the first 3G router of any kind with a native ExpressCard slot and WiFi/802.11 ‘N’ technology.
Designed for any type of M2M cell data collection and remote site equipment access, the ML-4G LTE CDS is a highly customizable communications system featuring a high speed 4G LTE gateway that is certified on all major US cellular networks. Improves reliability for cell communications and future proofs for later expansion needs.
WA211 Outdoor IEEE802.11a/n Wireless AP WoMasterWoMaster
WA211A and WA211B are the high performance IEEE 802.11a/n compliant waterproof outdoor (IP55) wireless access point with 2T2R MIMO data, rate up to 300Mbps and wireless coverage up to 2km. WA211 is equipped with 2 external 5dBi antennas, whilst WA211B has internal directional high power, high gain 13dBi antenna. The 5G + auto channel selection effectively prevents traffic congestion. The web-based utility brings easy and secure management and firmware upgrade. WA211 series is an ideal cost-effective high speed wireless communication solution with multiple operation modes for outdoor surveillance applications.
Communication that isn’t limited by time and place. No need for fixed lines or secondary networks. The Modula II GSM-R Call Station allows for operation even in remote areas, transferring voice and data communication via GSM-R networks.
The Modula II GSM-R is virtually unlimited.
Do you need to handle emergency calls, transmit data or control signals to a central station with guaranteed reliability? Do you need a mobile emergency call facility and information stations that can be put into operation at short notice?
Would you like to control and monitor disparate systems without fixed network connections?
All of these situations can be addressed by the Modula II GSM-R Call Station.
Wherever there is no landline connection and when it would be prohibitively expensive to lay a cable often an issue on the railways! The Modula II GSM-R call station offers the perfect solution.
Smart plug for home automation
* Direct remote control (BLE) of devices and appliances from Smartphone
* Control devices and appliances over internet with iTAS internet gateway
* EMR relay (230VAC, up to 15A)
* Schedule multiple timers and calendars to turn on/ off devices/ appliances
* Energy consumption measurement of the devices and appliances
The best way to efficient maintaining and securing your business operation is through monitoring.
Constantly checking your essential equipment is always been ways to prevent failure and unexpected break down however due to fast changing society manual monitoring is already out of league.
Linkwise developed it’s solution for this dilemma, in order to make an efficient, cost-effective and reliable monitoring system that is capable to send a critical alarm via SMS text message and Email.
For more information Visit: https://linkwisetech.com/
TP-LINK 500Mbps Gigabit Powerline Adapter TL-PA511 turns your existing powerline into a high speed network with no need for new wires or drilling. The twin pack design of TL-PA511KIT helps establish a powerline network initially. No configuration is required, simply plug your adapters into your power sockets and you can establish networking infrastructure in a flash. With a speed of up to 500Mbps, TL-PA511 transmits multiple HD streams and even 3D movies to every room, making it a great choice for an easy to build multimedia entertainment network.
Choosing how to get data from your network and into your monitoring & security tools is just as important as the tools themselves. Implementing Network TAPs (Terminal Access Point) is one of today’s best methods for creating permanent, in-line monitoring ports for your packet analyzers, intrusion detection systems (IDS), data retention compliance devices, and other analytic network tools like Wireshark and Snort.
Ruggedized Wireless 40 Mbps Ethernet Extender | Another ruggedized unit in the ZipLink Series by Multi-Link, the ZipLink-Ethernet model extends 40 Mbps of VoIP-grade bandwidth up to one mile. It can accommodate 100 VoIP calls simultaneously with remaining bandwidth left for internet access, file sharing, video streaming, etc.
Multi-Link Presentation for ZipLink SeriesScott Shelton
Don't let "Last Mile" obstacles derail your installation project or bust your budget.
Avoid trenching to hard to reach remote sites with the ZipLink 5.8GHz Ethernet Radio, a Wireless Phone Line & Ethernet Extender from Multi-Link. The ZipLink is a fast, affordable alternative to trenching cables through impassable terrain or across parking lots, streets, or concrete aprons. A typical trenching job would cost $3,500 to get started and average $200/hr in operations costs thereafter. At a fraction of the cost, the ZipLink could be installed and running in a few hours.
Don't Trench it, ZIP it! Don't let "Last Mile" obstacles derail your installation projects…Avoid trenching to hard to reach remote sites with the ZipLink 5.8GHz Ethernet Radio, a wireless Phone Line AND Ethernet Extender from Multi-Link.
The ACP 2.0 is a state-of-the art “Out of Band” Network Switch, Telephony Firewall, and telephone line sharing device….three solutions in one for remote network support.
Protecting access to information systems is becoming more critical in commercial and industrial applications, as are reliable, secure, and redundant communication paths. The ACP 2.0 provides these capabilities, while providing cost savings through phone line consolidation (line-sharing). Incoming calls are answered, screened, and automatically routed to phones, a fax machine, remote service ports, or remote information systems. Inbound and outbound calls are transparent.
Multi-Link Product Line Card 2013; Review latest products and pricing from Multi-Link, Inc. LineSharing Switches: The Stick, SR-3, ACP 2.0
Remote Rebooters: Power Stone; IP Power Stone 4000
Wireless POTS & Ethernet Extenders- The ZipLink
Reduce phone costs, improve connectivity, and secure your telecom and network equipment with Multi-Link’s ACP Series 2.0, Out-of-Band Network Switch & Call Router.
Multi-Link application note~ ISM band 12- 2012Scott Shelton
The purpose of this document is to provide some basic technical background on how equipment designed for the 2.4 GHz and 5.8 GHz ISM bands works. The Industrial, Scientific, and Medical (ISM) radio bands are radio bands (portions of the radio spectrum) reserved internationally for the use of radio frequency energy for industrial, scientific and medical purposes other than communications. Despite the intent of the original allocation, in recent years the fastest-growing uses of these bands have been for short-range, low power communications systems. Cordless phones, Bluetooth devices, NFC devices, and wireless computer networks all use the ISM bands.
Additionally, we will discuss key technical considerations that customers may need to be aware of when implementing equipment in these bands, and how Multi-Link design engineers have worked to improve reliability and security of our products in these bands, as well as co-existence with other equipment that may be in the area.
The IP4000 is an affordable and cost effective way to solve problems from the operations center, or even from a Smartphone. The primary feature of the device allows remote power control to two AC devices using either a web browser or MSN messenger. This device is a perfect tool for IT personnel supporting routers and network equipment in remote sites. The IP4000 provides the ability to either manually control power remotely over the internet, OR automatically by an internet monitoring feature that pings up to six IP addresses.
ZipLink is a fast, affordable alternative to trenching cables through impassable terrain or across parking lots, streets, or concrete aprons. A typical trenching job would cost $3,500 to get started and average $200/hr in operations costs thereafter. At a fraction of the cost, the ZipLink could be installed and running in few hours.
Multi-Link Inc. is offering a leasing program for corporate accounts installing The Stick for their own use. The program provides for rapid deployment, and long term product protection and support, all without any upfront equipment costs.
The SR-3 call processor is a passive line-sharing device that routes incoming phone (POTS) calls based on the “selective ring” service from the local telephone company.
1. NEW! M2M 3G Cell Signal Amplifier
with Passive Bypass Technology
The ML‐CSA 3500 3G Cell Signal Amplifier is an ancillary “Plug & Play” device that connects
in‐line with any cellular‐enabled router, modem, module, or gateway. ML‐CSA 3500 boosts
uplink cell signal strength by up to 15dB to lock in your connection with cell towers. A
dependable cell connection is crucial for real time datacom applications, monitoring &
control of remote assets, either FIXED or MOBILE!
• 15 dB Gain w/ increased Signal & Data Connectivity
• FCC & Industry Canada (IC) Certified AND Carrier Approved
• Full “Plug & Play” Kit
• Patented Passive Bypass Technology: Unique FAIL‐SAFE feature that ensures the connected
cell device stays online, even if amplifier loses power or goes in stand‐by mode. Vital for
mission‐critical applications for safety, security, and liability reasons.
• Patented Auto Gain & Oscillation Control: Incrementally adjusts the gain and output power
to optimize the cell signal strength and prevent interference with the carrier network. If
amplification is not needed, the booster goes into Passive Bypass Mode.
• Variable Input Power Range: +8.0 to 36.0 VDC for a variety of M2M applications.
EXCLUSIVE Features!
More Features
Contact us for more info! 800.535.4651 or sales@multi-link.net
122 Dewey Drive | Nicholasville, KY 40356 | multi‐link.net
