3. ACKNOWLEDGMENT
I Milli Jain, Student Of Dezyne E’cole’ College, Am Extremely Grateful To Each And Every Individual Who
Has Contributed In Successful Completion Of My Project.
I Express My Gratitude Towards My Mentors For Their Guidance And Constant Supervision As Well As For
Providing The Necessary Information And Support Regarding The Completion Of My Project.
This Project Has Been Created Under The Guidance Of Ms. Divya Sharma.
I am Thankful To Dezyne E’cole College.
Thank You
Due Regards
Milli Jain
4. SYNOPSIS
This Project Report On Anthropometrics Has Been Created And Developed By Me, During My Study Of
Commercial And Residential Spaces, Confirming To NSQF Level 5 And 6 Of NSDC.
While Developing This Project I Have Learned About Various Human Dimensions, Which Made Me
Understand The Standard Human Dimensions Required For Designing Public As Well As Residential
Spaces Like Retail Stores, Offices, Restaurants, Residential Buildings, Etc.
All The Detail Drawing Showcasing Human Body Dimensions Are Being Prepared Using Auto Cad And
Google Sketch And Are Presented In Further Pages.
I Request You To Kindly Go Through My Project Pages.
85. R E S I D E N T I A L
1. What Is Residential Anthropometrics?
2. Anthropometrics Of Seating
3. Living Spaces
4. Dining Spaces
5. Cooking Spaces
6. Sleeping Spaces
7. Bathroom Spaces
8. Laundry Room Spaces
9. Closet Spaces
86. R E S I D E N T I A L
What Is Residential Anthropometrics?
The Fascination Of Philosophers, Artists, Theoreticians And Architects With Human Body Sizes Dates Back Many
Centuries. During The Middle Ages, Dionysius, Monk Of Phourna Of Agrapha, Wrote Of Man’s Body Sizes As
“Nine Heads Tall”.
This Was The People’s Historic Involvement With Body Size, However, The Science Dealing Specifically With The
Measurement Of Human Body To Determine The Differences In Individuals, Groups, Etc., Is Termed As
Anthropometrics.
During The Course Of Time, A Significant Amount Of Anthropometric Data Has Been Amassed. Unfortunately For
Designer, However, The Thrust Of Much Of The Efforts In This Area Was For Taxonomic Purposes, Physiological
Studies, Etc. And Not Primarily For The Ergonomic Implications Of Body Sizes. It Was Not Until The 1940s That The
Need For Anthropometric Data, Generated In A Variety Of Industrial Fields, But Primarily In The Aircraft Industry.
It Is Essential, Due To The Many Variables Involved, That The Data Selected Be Appropriate To The User Of The
Space Or Furniture To Be Designed. It Becomes Necessary For The Intended User Population To Be Properly
Defined In Terms Of Such Factors Like Age, Sex, Occupation And Ethnicity.
87. R E S I D E N T I A L
Anthropometrics Of Seating
The Design Of Seating Can Be Traced At Least To Antiquity. The Stool, For Example, Had Already Been
Developed Into Valued Article Of Furniture By The Egyptians As Far Back As 2050 B.C. And Chair As Far Back As
1600 B.C. Despite Its Ubiquity And Long History, However Seating Is The Most Poorly Designed Elements Of
Interior Space. One Of The Major Difficulties In The Design Of Seating Is That Sitting Is, Quite Frequently, Viewed
As A Static Activity While In Actually , It Is A Rather Dynamic One.
Paradoxically, A Chair That Is Anthropometrically Correct May Not Necessarily Be Comfortable As Well. If The
Design, However, Is Simply Not Responsive At All To Human Dimensions And Body Size, There Is No Question That
The Seating Will, In Fact, Be Uncomfortable.
Another Difficulty Is That Very Little Data Are Available With Respect To The Bio Mechanism Of Chair Design And
Practically No Research Has Been Published With Respect To “Comfort”
It Should Be Noted That The Dimensions Taken Are Taken From The Compressed Seat Padding Or Cushion
Surface. In The Design Of Seating, The Relative Resiliency And Compressive Qualities Of Cushion Are Therefore
Extremely Important.
And The Drawings On The Following Pages Examines All These Conditions And Should Be Helpful Only A Few Of
The Many Designs Situation That Require Knowledge Of Human Dimensions.
88.
89. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
This diagram shows the more
critical measurements to be
considered in the design of the
typical work or secretarial chair.
To function properly its design
must be responsive to human
dimension. Anthropometrically,
the two most common and
important measurements are
buttock-popliteal length popliteal
height. Provisions for support of
the lumbar region by proper
location of a backrest is essential
for a successful design.
Inch cm.
A 17 43.2
B 13.5-15 33.6-38.1
C 14-19 35.6-48.2
D 5-7.5 12.7-19
E 4-8 1.2-20.3
Work /Secretarial Chair
A
Seat Width
Side View Plan View
B
Seatdepth
C
SeatheightD
E
FSeat
reference
point
Backrest
Reference
point
90. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
This top diagram shows
dimensions for a general purpose
chair intended for brief periods
of use.
The bottom diagram shows the
dimensions for an executive
chair, a type intended for a longer
duration of use. The buttock
popliteal length governs the seat
depth. The very large person,
however, would find that such a
depth might leave a substantial
portion of his thigh unsupported.
Executive Chair
C
Seat Width
Inch cm.
A 31-33 78.7-83.8
B 15.5-16 39.4-40.6
C 16-17 40.6-43.2
C
SeatHeight
A
B
15
14
Seat reference
point
Backrest
Reference
point
Side View Plan View
91. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc- ID + 1 Year Residential
Design Diploma
This top diagram shows
dimensions for a general purpose
chair intended for brief periods of
use.
The bottom diagram shows the
dimensions for an executive
chair, a type intended for a longer
duration of use. The buttock
popliteal length governs the seat
depth. The very large person,
however, would find that such a
depth might leave a substantial
portion of his thigh unsupported.
General Purpose Chair
C
Seat Width
Inch cm.
D 17-24 43.2-61
E 0-6 0-15.2
F 15.5-18 39.4-45.7
G 8-10 20.3-25.4
h 12 30.5
I 18-20 45.7-50.8
J 24-28 61-71.1
K 23-29 58.4-73.7
C
Seatheight
D
15
F
E
Seat
reference
point
Backrest
Reference
point
Side View Plan View
92. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The easy chair, is a difficult chair
type to design or establish
guidelines for, since it is
primarily indented for
relaxation and comfort qualities
which are highly personal.
Design should allow the user to
change posture. The drawing in
the bottom provides basic
dimensional information for the
design of a drafting stool, which
is similar in many respects to
the secretarial chair
Inch cm.
A 16-17 40.6-43.2
B 8.5-9 21.6-22.9
C 10-12 25.4-30.5
D 16.5-17.5 41.9-44.5
E 18-24 45.7-61
Easy Chair
E
A
Seatheight
Seat reference point
Backrest
Reference
point
Side View
93. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The easy chair, is a difficult chair
type to design or establish
guidelines for, since it is primarily
indented for relaxation and
comfort qualities which are highly
personal. Design should allow the
user to change posture. The
drawing in the bottom provides
basic dimensional information for
the design of a drafting stool,
which is similar in many respects
to the secretarial chair
Inch cm.
F 6-9 15.2-22.9
G 10 adjust. 25.4 adjust.
H 15.5-16 39.4-40.6
I 12 max. 30.5 max
J 30 adjust. 76.2 adjust.
K 15 38.1
L 12-14 30.5-35.6
Drafting Chair/ Stool
C
Seat Width
24
H
SeatDepth
L
F
H
GI
15
14
J
16
Side View Plan View
94. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The drawings shows the basic
dimensions for a design of
banquette seating. The lack of
arm rest makes it difficult to
define seat boundaries. The user
therefore tends to establish his
own territory by assuming the
desired sitting posture and
placing personal articles next to
him.
Because of many hidden
psychological factors involved,
the actual efficiency of this
seating type in terms of capacity
is questionable. The diagram
indicates two possible seating
situations , each dictated by the
anthropometrics involved.
Inch cm.
D 30 76.2
E 24 61
Banquette Seating
DD
D
EEEE
Low density High density
95. R E S I D E N T I A L
Living Spaces
The Variety Of Human Activities That Occur Within Residential Spaces, Whether They Be Studio Apartments, Two
And Three BHK Or Suburban Houses, Is Formidable. It Is Within This Single Environment That People Sleep, Dine,
Read, Mediate, Entertain, Do Housework, Read Cook, Bathe, Etc. It Is Also Between These Spaces That People
Spend At Least Half Of Their Walking Hours And Are Subjected To Most Of The Physical Injuries They Are Likely To
Sustain During The Course Of Their Lifetime.
The Various Activities And Elements Of Furniture Usually Associated With Living Spaces Result In Many Levels Of
Interface Between The Human Body And The Physical Components Of The Space. The Most Obvious Is Between
The User And The Chair Or Sofa. In This Regard Seat Height Must Take Into Consideration Popliteal Height, While
Seat Depth Must Be Responsive To Buttock-popliteal Length.
The Possibilities Are Almost Endless And The Drawings On The Following Pages Examines All These Conditions And
Should Be Helpful Only A Few Of The Many Designs Situation That Require Knowledge Of Human Dimensions.
96.
97. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The top drawing deals with the
male dimensions based on 95th
percentile data, the maximum
body breadth dimension is 22.8
in. or 57.9 in., with a nude
subject. The overall dimension
therefore include, the individual
width allowances and the width
of the sofa arm construction,
which obviously can vary
depending on personal design
preference.
Inch Cm
A 42-48 106.7-121.9
B 6-9 15.2-22.9
C 3-6 7.6-15.2
D 28 71.1
E 62-68 157.2-172.7
F 90-96 228.6-243.8
G 40-46 101.6-116.8
H 26 66
I 58-64 147.3-162.6
J 84-90 213.4-228.6
Sofa Seating/ Males
D
15B
24
DD
A
C
C
F
24
15B
DD
A
E
C
98. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The top drawing deals with the
male dimensions based on 95th
percentile data, the maximum
body breadth dimension is 22.8
in. or 57.9 in., with a nude
subject. The overall dimension
therefore include, the individual
width allowances and the width
of the sofa arm construction,
which obviously can vary
depending on personal design
preference.
In spaces where seating is to be
used by both sexes, the larger
dimensions should apply.
Inch Cm
A 42-48 106.7-121.9
B 6-9 15.2-22.9
C 3-6 7.6-15.2
D 28 71.1
E 62-68 157.2-172.7
F 90-96 228.6-243.8
G 40-46 101.6-116.8
H 26 66
I 58-64 147.3-162.6
J 84-90 213.4-228.6
Sofa Seating/ Females
E
24
15B
HH
G
C
I
24
H H H
J
15B
G
C
99. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The top drawing examines the
relationship of the female and
male body dimensions to arm
chair seating in order to
determine the amount of space
the seated body requires.
The bottom drawing is essentially
informative and its purpose is to
suggest allowances for
comfortable circulation relating
to corner lounge seating
situation.
Corner Lounge Chair Seating (Male And Female)
Inch Cm
A 34-40 86.4-101.6
B 28 71.1
C 42-48 106.7-121.9
D 6-9 15.2-22.9
E 3 7.6
F 32-38 81.3-96.5
G 26 66
H 40-46 101.6-116.8
I 48-60 121.9-152.4
J 3-6 7.6-15.2
H
15
10
D
B
A
D 15
C
F
G
10
E
100. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The top drawing examines the
relationship of the female and
male body dimensions to arm
chair seating in order to
determine the amount of space
the seated body requires.
The bottom drawing is essentially
informative and its purpose is to
suggest allowances for
comfortable circulation relating
to corner lounge seating
situation.
Corner Lounge Chair Seating With Circulation (Male And Female)
Inch Cm
A 34-40 86.4-101.6
B 28 71.1
C 42-48 106.7-121.9
D 6-9 15.2-22.9
E 3 7.6
F 32-38 81.3-96.5
G 26 66
H 40-46 101.6-116.8
I 48-60 121.9-152.4
J 3-6 7.6-15.2
Varies AF
10
10
10
C
B
15
H
101. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The drawing is based on a
conversational grouping in which
the clearance between the front
of the seat and the edge of the
table is limited between 16 and
18 inches.
Inch cm.
A 18-24 45.7-61
B 15.5-16 39.4-40.6
C 16-17 40.6-43.2
D 30 76.2
E 24 61
F 12-18 30.5-45.7
Lounge Seating Clearances
A
B BC
D DVaries
F
E
15
6
102. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
Inch cm.
A 30-36 76.2-91.4
B 16-18 40.6-45.7
C 12-16 30.5-40.6
Lounge Seating Clearances Relationships The drawing is based on a
conversational grouping in which
the clearance between the front
of the seat and the edge of the
table is limited between 16 and
18 inches.
A
B
Varies
24
c
Lounge chair
103. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The drawing suggests an overall
allowance for easy chair or
reclining chair seating, including
footrest. The buttock-leg length of
the larger person is the most
significant anthropometric
measurement is establishing this
clearance. It should also be noted
that the height of the footrest is
also a function of seat height. The
footrest should be a few inches
below the height of the seat.
Inch cm.
A 60-68 152.4-172.7
B 14-17 40.6-43.2
Reclining Chair With Footrest
A
Head rest
15
18
B
Foot rest
104. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The configuration of the furniture
is not intended as a realistic
illustration of any specific
element of furniture but rather as
a general representation of
furniture types normally found in
a living space
Wall Unit (Access By Male) Wall Unit (Access By Female)
BA
F
23
Storage
cabinet
Activity
zone
Inch cm.
A 18-24 45.7-61
B 48-58 121.9-147
C 36-40 91.4-101
D 46-52 116.8-132
E 30-36 76-91
F 72 182.9
G 69 175.5
G
23
Storage
cabinet
Activity
zone
DA
105. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
Inch cm.
F 72 182.9
G 69 175.5
H 42-50 106-127
I 12-16 30.5-40.6
J 18 45.7
K 24-32 61-81
L 39-42 99.1-106
M 36-39 91.4-99.1
Wall- Mounted Bar Unit
(Access By Male)
Wall- Mounted Bar Unit
(Access By Female)
The configuration of the furniture
is not intended as a realistic
illustration of any specific
element of furniture but rather as
a general representation of
furniture types normally found in
a living space
H
I
Line of
cabinet
I J
K
F
L
Line of
cabinet
I I J
H
K
G
M
106. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
The drawing suggests the
relationship between human
dimensions and the display of art
work. Eye height is the significant
anthropometric body
measurement here. It should be
noted, however, that the visual
angle in which small detail can be
sharply defined without rotating
the eyes is only about 1 degree.
Inch cm.
A 16-24 40.6-61
B 60-78 152.4-198.1
C 30-42 76.2-106.7
D 36 91.4
Display Of Art Work
A
B
C
2
DVaries
Assumemin.heightof96”
107. R E S I D E N T I A L
Dining Spaces
In Examining The Relationship Between Human Dimension And Dining Spaces, The Areas Of Most Concern To
The Designers Are The Clearance Around The Table And The Number Of People A Table Of A Particular Size
Can Accommodate. The Clearances Between The Edge Of The Table And The Wall Or And Other Physical
Obstruction Must At The Very Least Accommodate Two Elements (1) The Space Occupied By The Chair (2) The
Maximum Body Breadth Of A Person Of Larger Body Size As He Circulates Between The Chair And The Wall.
It Should Also Be Noted That The Size Of The Place Setting Will Determine How Much Table Area Will Be
Available For Centrally Located Shared Elements, Such As Beverages Or Serving Dishes.
Too Often In Calculating The Number Of People To Be Accommodated Around The Table, The Designer Relies
Exclusively On Plastic Furniture Templates Or On The Application Of A 24” Or 61 Cm, Centre To The Centre Chair
Spacing, Instead Of Considering The Maximum Body Breadth Of A Person Of Larger Body Size.
The Drawing On The Following Pages Examines All These Conditions And Should Be Helpful In Establishing An
Approach For Individual Design Analysis.
108.
109. In cm
A 27 68.6
B 18 45.7
C 9 22.9
D 30 76.2
E 21 53.3
F 16 40.6
G 5 12.7
H 24 61.0
I 90 228.6
J 72 182.9
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
16th Jan.’ 2017 Dezyne E’cole College
www.dezyneecole.com
Milli jain
B.sc.ID & 1 Year Residential
Design. Diploma
Dining spaces
To determine table size it is
helpful to view the table as
consisting of two zones. The
place setting zone represents
the personal activity space
directly in front of the
individual diner ideally, it
should be of adequate size to
accommodate the necessary
dinnerware, silverware,
glassware, etc. The width of
this zone
Optimum shared
Access zone
Optimum place
setting zone
minimum place
setting zone
Minimum shared
Access zone
A
C
B
D
H
E
F
G
24
Optimum Place Setting Minimum Place Setting
110. In cm
A 27 68.6
B 18 45.7
C 9 22.9
D 30 76.2
E 21 53.3
F 16 40.6
G 5 12.7
H 24 61.0
I 90 228.6
J 72 182.9
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
16th Jan.’ 2017 Dezyne E’cole College
www.dezyneecole.com
Dining spaces
To determine table size it is
helpful to view the table as
consisting of two zones. The
place setting zone represents
the personal activity space
directly in front of the individual
diner ideally, it should be of
adequate size to accommodate
the necessary dinnerware,
silverware, glassware, etc.
Optimum shared
Access zone
Optimum place
setting zone
A
C
B
24
D D D
I
Optimum Place Setting for Three:
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
111. In cm
A 27 68.6
B 18 45.7
C 9 22.9
D 30 76.2
E 21 53.3
F 16 40.6
G 5 12.7
H 24 61.0
I 90 228.6
J 72 182.9
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dezyne E’cole College
www.dezyneecole.com
Milli jain
B.sc.ID & 1 Year Residential
Design. Diploma
Dining spaces
To determine table size it is
helpful to view the table as
consisting of two zones. The
place setting zone represents the
personal activity space directly in
front of the individual diner
ideally, it should be of adequate
size to accommodate the
necessary dinnerware,
silverware, glassware, etc.
Minimum shared
Access zone
Minimum place
setting zone
24
H H H
I
E
G
F
Minimum Place Setting for Three
16th Jan.’ 2017
112. In cm
A 54 137.2
B 12 30.5
C 30 76.2
D 48 121.9
E 18 45.7
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
Dining spaces
B C B
EE E
D
EC
A
OPTIMUM
SHARED
ACCESS ZONE
OPTIMUM
PLACE-SITTING
ZONE
Units arranged around the end of
table is illustrated. ,room size also
dictates the size of the table.
Much depends on the level of
comfort and Convenience
desired, which, within limits
,becomes a matter of personal
decision.
Optimum Table Width
17th Jan.’ 2017
113. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dezyne E’cole College
www.dezyneecole.com
Dining spaces
Minimum Table Width
In cm
F 42 106.7
G 9 22.9
H 24 61.0
I 40 101.6
J 16 40.6
K 10 25.4
K
G H G
J J
I
JH
F
MINIMUM PLACE-
SITTING ZONE
MINIMUM SHARED
ACCESS ZONE
A table for six based on a
minimal Increment ,room size
also dictates the size of the
table. Much depends on the
level of comfort and
Convenience desired, which,
within limits ,becomes a matter
of personal decision.
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
17th Jan.’ 2017
114. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dezyne E’cole College
www.dezyneecole.com
Dining spaces
Rectangular Table/Minimum Length And Width/Dining For Six
In Cm
G 9 22.9
H 24 61.0
I 40 101.6
J 16 40.6
K 10 25.4
L 116-128 294.6-
325.1
M 18-24 45.7-61.0
N 80 203.2
O 78-90 198.1-
228.6
l
MINIMUM SHARED
ACCESS ZONE
NM M
MMH
HHJ J
F
JJK
MINIMUM SHARED
ACCESS ZONE
GG
A table for six based on a
minimal Increment ,room size
also dictates the size of the
table. Much depends on the
level of comfort and
Convenience desired, which,
within limits ,becomes a matter
of personal decision.
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
O
17th Jan.’ 2017
115. Project Report Drawing Title Date of Submission Submitted to Submitted by
Anthropometric Dining Area
142
Dezyne E’cole College
www.dezyneecole.com
Inch Cm
A 96 – 102 243.8 – 259.1
B 18 – 24 45.7 – 61.0
C 12 30.52
D 30 76.2
E 132 – 144 335.3 – 365.8
F 96 243.8
G 18 45.7
H 54 137.2
The drawing applies the optimal
increment unit to the
rectangular table for formal
dining for six. The table size
shown is 54 by 96 inch. The size
will provide each person with an
individual place – setting zone of
18 by 30 inch, and will allow a
shared access zone at the center
of the table with a depth of 18
inch. The 30 inch width provided
for each person allows for elbow
room
A
DCB C
AAA
H
B
E
F
GDDG
Optimum Place –
Setting Zone
Shared Access Zone
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
Rectangular Table/ Optimum Length And Width / Dining For Six
18th Jan.’ 2017
116. Project Report Drawing Title Date of Submission Submitted to Submitted by
Anthropometric Dining space Dezyne E’cole College
www.dezyneecole.com
Inch Cm
B 18 – 24 45.7 – 61.0
D 30 76.2
G 18 45.7
I 36 – 42 91.4 – 106.7
J 48 min. 121.9 min.
The drawing shows a minimal,
square general purpose table for
informal dining. Although the
width and depth of the place –
setting zones are the same as in
the larger rectangular tables,
their angular configuration
reduces the area significantly as
well as the area of the shared
access zone. To allow clearances
for the chair and head-on
circulation behind the chair, a
minimum distance of 48 inch,
must be maintained between
the edge of the table and the
wall or nearest physical
obstruction. A clearance of 36 to
42 inch can be provided to allow
restricted circulation. This will
require a person to sidestep or
the seated person to adjust the
chair to allow passage.
G
I I J
B
D
Place – Setting
Zone
Shared Access Zone
Circulation Zone
Breakfast/ Kitchen Table For Four
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
18th Jan.’ 2017
117. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dinning Spaces Dezyne E’cole College
www.dezyneecole.com
F
H
16
I
C
G
B B D E
A
Circulation
zone
Sitting
zone
Table Diameter
Shared Access
Zone
Place Setting
Zone
24
36 in Diameter Breakfast/Kitchen Table For Four:
In cm
A 30 min. 76.2 min.
B 6 15.2
C 24 61.0
D 18-24 4507-61.0
E 12 30.5
F 48-54 121.9-137.2
G 36 91.4
H 30-36 76.2-91.4
I 114-126 289.6-320.0
The diagram illustrates a 36-in, or
91.4cm, diameter round table
seating four people and shows the
necessary clearances around the
perimeter. Four people cannot
function comfortably around such a
small table for anything but the
lightest snacks. The individual place-
setting zones are extremely
restricted and the shared access
zone at the center is too small to
accommodate in the way of serving
dishes platters.
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
18th Jan.’ 2017
118. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dinning Spaces Dezyne E’cole College
www.dezyneecole.com
In cm
C 24 61.0
D 18-24 4507-61.0
E 12 30.5
H 30-36 76.2-91.4
I 114-126 289.6-320.0
J 84-96 213.4-243.8
K 48 121.9
This Diameter Table Can Function
Adequately For Four People. The
Place-setting Zone Is Reasonably
Sufficient To Accommodate The
Various Place-setting Elements
And Provides Generous Elbow
Room As Well. Although The
Central Shared Access Zone Is
Restricted It Provides Far More
Space Than The 36-in,or 91.4-
cm.If Used For Light Snacks Or
Coffee the Table Can Seat Five.
The Clearance For Circulation Are
The Same As For The 36-in. Table
J
H
C
D
D
E
K
Table Diameter
24
Place
Setting
Zone
Shared
Access
Zone
Sitting
zone
K
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
48 In Diameter Circulation Table For Four
18th Jan.’ 2017
119. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dezyne E’cole College
www.dezyneecole.com
The optimal place-setting zone at
the beginning of this section was
established at 18 by 30 in, or 45.7
by 76.2 cm. the 60-inch or 152.4-
cm , diameter table shown at the
top of the page can easily , if not
luxuriously, accommodate four
such optimal zones . The
advantage of the round table is its
relative flexibility to accommodate
additional people .
60-in (152.4-cm) diameter circular table for four/optimum seating
In Cm
A 96-108 243.8-
274.3
B 18-24 45.7-61.0
C 60 152.4
D 30 76.2
E 12 30.5
F 30-36 76.2-91.4
G 72 182.9
H 132-
144
335.3-
365.8
SHARED
ACCESS ZONE
sitting
zone
Place setting zone
24
F
E
C
A
D
BB
Sitting
zone
Table diameter
Dinning Spaces Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
19th Jan.’ 2017
120. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dezyne E’cole College
www.dezyneecole.com
Dinning Spaces
72-in (182.9-cm) diameter circular table for four/optimum scheme
In Cm
A 96-108 243.8-
274.3
B 18-24 45.7-61.0
C 60 152.4
D 30 76.2
E 12 30.5
F 30-36 76.2-91.4
G 72 182.9
H 132-
144
335.3-
365.8
The 72-inch or 182.9-cm ,
diameter table to seat six people,
with optimal place setting zones ,
would on balance , constitute a
more sensible choice than a 60-
inch diameter table to serve four .
Project Report Drawing Title Date of Submission
SHARED ACCESS
ZONESittingzone
Place setting
zone
D
B
E
24
G
H
22
Table diameter
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
19th Jan.’ 2017
121. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dining 20th Jan.’17 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
This drawing shows a 72”
diameter table that seats eight
people based on minimal place-
setting zone. Although the
effective depth of the zone is less
than provided in the optimal
arrangement, the central shared
zone is greater.
In Cm
A 132-144 335-365
B 30-36 76-91.4
C 72 182.9
D 18-24 45.9-61
E 12 30.5
F 24 61
G 50-54 127-137
H 50-60 127-152
I 54 137.2
J 86-102 218-259
k 90-96 228-243
72 In (182.9 Cm) Diameter Circulation Table For Eight/ Minimum Scheme:
E D
B C B
Shared access
zone
A
122. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dining spaces Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
This drawing shows the clearance
suggested for wheelchair access
to dining table and the space
required by a person standing,
arranging or otherwise preparing
food to be served.
In Cm
A 132-144 335-365
B 30-36 76-91.4
C 72 182.9
D 18-24 45.9-61
E 12 30.5
F 24 61
G 50-54 127-137
H 50-60 127-152
I 54 137.2
J 86-102 218-259
k 90-96 228-243
D
I
B
H
G
D
J
K
Dining
Table
Buffet
Overall table to wall dimension
Sitting
zone
Circulation zone
Standing
activity
zone
Min. clearance
Clearance Requirements Between Dining Table And Buffet:
20th Jan.’17
123. In Cm
A 30-36 76.2-91.4
B 18-24 45.7-61.0
C 16-17 40.6-42.2
D 7.5
min.
19.1 min.
E 29-30 73.7-76.2
F 48-60 121.9-152.4
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dining Dezyne E’cole College
www.dezyneecole.com
This drawing explores two basic
aspects of this relationship. The
first is the various locations of
the chair in relation to the table
during the course of the meal
and the clearance involved. The
chair may be relocated as many
as four times during the dining
process. At the beginning, it is
much closer to the table. Near
the end of the meal.
Minimum Chair Clearance / No Circulation
Minimum
clearance
B
Sitting
zone
A
Line of wall or
Obstruction
C
D
E
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
20th Jan.’17
124. In Cm
A 30-36 76.2-91.4
B 18-24 45.7-61.0
C 16-17 40.6-42.2
D 7.5
min.
19.1 min.
E 29-30 73.7-76.2
F 48-60 121.9-152.4
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Dining Dezyne E’cole College
www.dezyneecole.com
This drawing indicates that to
allow sufficient clearance for
someone to pass or serve. The
table should be located between
48 and 60 in. from the wall.
Minimum Clearance Behind Chair In Place
B
Sitting
zone
F
Line of wall or
Obstruction
C
D
E
A
Circulation
zone
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
20th Jan.’17
125. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Living spaces Dezyne E’cole College
www.dezyneecole.com
Inch Cm
A 132-162 335.3-411.5
B 66-81 167.6-205.7
C 30-36 76.2-91.4
D 18-24 45.7-61.0
E 36-42 91.4-106.7
F 29-30 73.7-76.2
G 27 68.6
H 19 48.3
The top drawing shows the
relationship of fixture height above
the table surface to a small and a
large person. The drawing also
indicates a minimal clearance
between the table and the wall,
with the chair minimally extended
from the table to permit one-lane
service circulation behind the
seated person.
D
B
H
E
G
F
C
24
Circulation
zone
Hanging
fixture
Line of wall or
obstruction
B
A
Sitting
zone
D C
Circulation
zone
Sitting
zone
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
Minimum Dining Area Width
21st Jan.’17
126. Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Living spaces Dezyne E’cole College
www.dezyneecole.com
In Cm
C 30-36 76.2-91.4
E 36-42 91.4-106.7
F 29-30 73.7-76.2
I 60-72 152.4-182.9
J 54-60 137.2-152.4
K 18 45.7
L 29-36 73.7-91.4
The bottom drawing provides
additional clearance information
and suggests a minimum distance
of 60 in, between table and wall to
accommodate one-lane head-on
circulation with the chair extended
a maximum distance from the
table.
I
Shelf
23
C J
E K
L
F
C
24
16
Overall Clearance From Edge
Of Table
Circulation
zone
Chair in
extended
position
service
zoneLine of wall or
obstruction
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
Minimum Clearance Behind Extended Chair
21st Jan.’17
127. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dining Area Dezyne E’cole College
www.dezyneecole.com
Inch Cm
A 12-18 30.5-45.7
B 90-96 228.6-
243.8
C 60 152.4
D 30-36 76.2-76.2
E 30 76.2
F 29-30 73.7-76.2
The top drawing show clearances
between the edge of the table
and the wall or nearest physical
obstruction to allow tow-lane
service circulation behind the
chair , with the chair away form
the table. a compressed minimal
clearance permitting head –on
one-lane circulation behind the
seated person, with the chair
minimally extended form the
table was established at 48inch.
EE
C D
BA
F
Circulation Zone/Tow people
Minimum Clearance For Tow Behind Extended Chair
Chair in
Extended Position
Milli Jain
B.sc.ID & 1 Year Residential
Design. Diploma
21st Jan.’17Residential Design
Basic Assignments
128. In Cm
D 30-36 76.2-91.4
E 30 76.2
F 29-30 73.7-76.2
G 101.5-110 257.8-
279.4
H 48-54 121.9-
137.2
I 17.5-20 44.5-50.8
J 36 91.4
K 18 45.7
L 16-17 40.6-43.2
M 7.5 min 19.1 min
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
23rd Jan.’ 2017 Dezyne E’cole College
www.dezyneecole.com
Dining spaces
G
service
zone
D
F
K
H
I J
M
The top drawing shows clearances
between the edge of the table and
the wall or nearest physical
obstruction to allow two-lane
service circulation behind the chair
with the chair away from the table.
the individual clearance show
require the table to be located 90
to 96 in or 228.6 to 243.8 cm from
the wall.
L14
12
Sitting
zone
circulation
zone
Table depth
line of wall Or
obstruction
banquette
Milli Jain
B.Sc- ID + 1 Year Residential
Design Diploma
Minimum Clearance For Tow Behind Extended Chair
129. R E S I D E N T I A L
The Height Of A Kitchen Work Counter , The Proper Clearances Between Cabinets Or Appliances For
Circulation , The Accessibility To Overhead Or Undercover Storage , And Proper Visibility Are Among The Primary
Consideration In The Design Of Cooking Spaces . All Must Be Responsive To Human Dimension And Body Size If
The If The Quality Of Interface Between The User Of Larger Body Size Must Be Taken Into Account As Well As The
Projection Of The Appliances .
Standard Kitchen Heights Manufactured Are All About 36 Inch Or 91.4 Cm . But Such A Height Does Not
Necessarily Accommodate The Body Dimension Of All User For All Tasks. The Drawing On The Following Pages
Examine The Question Of Human Dimension In Terms Of The Anthropometric Measurements .
Cooking Space
130.
131. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
COUNTER AND BASE CABINET / GENERAL CLEARANCES
The drawing of the page illustrates
some of the basic horizontal
clearances required in a kitchen. It
shows the clearances between two
counters with base cabinet.
code inch cm
A 60-66 152.4-167.6
B 48 min. 121.9 min.
C 24-30 61.0-76.2
D 36 91.4
E 48 121.9
F 12-13 30.5-33.0
G 76 max. 193.0 max.
H 72 max. 182.9 max.
I 59 149.9
J 25.5 64.8
K 24-26 61.0-66.0
L 15 min. 38.1 min.
M 18 45.7
N 35-36 88.9-91.4
O 69 max. 175.3 max.
Anthropometric Cooking Spaces 13 Feb 2017
A
Circulation
Zone
B
C D
Counter
with Base
Cabinet
Counter
with Base
Cabinet
2
4
Work zone
Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
132. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
CABINET REACH COMPARISONS
The drawing of the page deals with
vertical clearances . The height of
the shelf , shown in broken lines ,
with the overhead cabinets is
within reach , allowing for the
projection of the base cabinet .
Anthropometric Cooking Spaces
F
Zone of most
comfortable reach
Shelf
Max.ReachwithoutbaseCabinetFemale
Mal
e
K
J
I
M
N
H
Max.ReachwithbaseCabinetFemale
Mal
e
code inch cm
A 60-66 152.4-167.6
B 48 min. 121.9 min.
C 24-30 61.0-76.2
D 36 91.4
E 48 121.9
F 12-13 30.5-33.0
G 76 max. 193.0 max.
H 72 max. 182.9 max.
I 59 149.9
J 25.5 64.8
K 24-26 61.0-66.0
L 15 min. 38.1 min.
M 18 45.7
N 35-36 88.9-91.4
O 69 max. 175.3 max.
13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
133. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
WORKCOUNTER / BREAKFAST BAR
The drawing shows some of the
more important horizontal and
vertical clearances related to a
typical breakfast bar .it should be
noted that a bar height of 36 inch
or 91.4 cm , requires that the stool
be equipped with a footrest .
code inch cm
A 18 min. 45.7 min.
B 7.5 min. 19.1 min.
C 32 81.3
D 30 76.2
E 4 max. 10.2 max.
F 4 10.2
G 22-24.5 55.9-62.2
H 36 45.7
I 36 91.4
J 42 106.7
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
WORKCOUNTER
G
A
C
Work Counter
B
C
D
Breakfast Bar
E
Overhead Storage
DH
BREAKFAST BAR
134. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
MIX AND PREPARATION CENTER
The drawing shows the critical
counter work zone of a standing
user. The outer perimeter reach of
the user having the smaller body
size . The 18 inch or 45.7 cm
dimension indicated was adapted
from 5 percentile female data .
Anthropometric Cooking Spaces
Critical work
counter zone
H
I
J
G
RefrigeratorSink
Line of
Cabinets
Counter space shared with sink and
refrigerator center
code inch cm
A 18 min. 45.7 min.
B 7.5 min. 19.1 min.
C 32 81.3
D 30 76.2
E 4 max. 10.2 max.
F 4 10.2
G 22-24.5 55.9-62.2
H 18 45.7
I 36 91.4
J 42 106.7
13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
135. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
The drawing shows the horizontal
clearances involved in the vicinity
of the dish washing area. While
loading or unloading the
dishwasher , a clearance of at least
40 inch or 101.6 cm is
recommended to accommodate
the human body .
code inch cm
A 70-76 177.8-193.0
B 40 min. 101.6 min.
C 30-36 76.2-91.4
D 18 45.7
E 24 min. 61.0 min.
F 28-42 71.1-106.7
G 18 min. 45.7 min.
H 12 min. 30.5 min.
I 24-26 61.0-66.0
J 57 min. 144.8 min.
K 35-36 88.9-91.4
L 22 min. 55.9 min.
M 3 7.6
N 4 10.2
Anthropometric Cooking Spaces
SINK CENTER
work zone
A
Sink
Line of
Cabinets
E
F
G
Dishwasher
B C
Circulation
Zone
Min. Clearances between
counter and wall or other
obstruction
Min. Clearances between edge of sink and corner
counter
Min. Counter
space Req. for
either side of sink
Min. Counter
space Req. for
either side of sink
24
13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
136. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces
SINK CENTER
The drawing of the page shows a
sectional view through the same
area . The recommended counter
height is between 35 and 36 inch or
88.9 to 91.4 cm .
code inch cm
A 70-76 177.8-193.0
B 40 min. 101.6 min.
C 30-36 76.2-91.4
D 18 45.7
E 24 min. 61.0 min.
F 28-42 71.1-106.7
G 18 min. 45.7 min.
H 12 min. 30.5 min.
I 24-26 61.0-66.0
J 57 min. 144.8 min.
K 35-36 88.9-91.4
L 22 min. 55.9 min.
M 3 7.6
N 4 10.2
13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
Clearance Required Between Top
Edge Of Sink And Lower Edge Of
Possible Wall Cabinet Work Zone
Lower Edge Of Possible
Wall Cabinet Located
Over Sink
Window
Sink
Base Cabinet
ClearanceRequiredBetweenFloor
AndLowerEdgeOfPossibleWall
Cabinet
LK
BI
C
N
Dead
Space
Wall Cabinet
137. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Cooking Spaces
The drawing on this page deal
primarily with the vertical
dimensions related to the
refrigerator installation within the
kitchen . The drawing illustrates a
typical floor-standing refrigerator
installation as well as a below
counter installation .
REFRIGERATOR CENTER / TYPICAL REFRIGERATOR
LOCATIONS
code inch cm
A 36 91.4
B 11-14 27.9-35.6
C 25.5 64.8
D 35-36 88.9-91.4
E 59 149.9
F 55-69.5 139.7-176.5
G 30-36 76.2-91.4
B
Zone of
most
comfortable
reach
C
D
E
F
A
Typical Under
counter
Refrigerator
work
zone
13 Feb 2017Anthropometric Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
138. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Cooking Spaces
The drawing suggest the
possibility of a third type of
refrigerator that might be wall
mounted or located on the top of
the counter , so that most of its
surface would fall within this
shaded area .
REFRIGERATOR CENTER /
PROPOSED REFRIGERATOR
LOCATIONS
code inch cm
A 36 91.4
B 11-14 27.9-35.6
C 25.5 64.8
D 35-36 88.9-91.4
E 59 149.9
F 55-69.5 139.7-176.5
G 30-36 76.2-91.4
13 Feb 2017Anthropometric Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
Work Zone
C
G
A
Zone Of
Most
Comfortabl
e Reach
D
E
139. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
RANGE CENTER
The drawing illustrates the
clearances related to range centers.
code inch cm
A 48 121.9
B 40 101.6
C 15 38.1
D 21-30 53.3-76.2
E 1-3 2.5-7.6
F 15 38.1
G 19.5-46 49.5-116.8
H 12 30.5
I 17.5 44.5
J 96-101.5 243.8-257.8
K 24-27.5 61.0-66.9
L 24-26 61.0-66.0
M 30 76.2
N 60 152.4
O 35-36.25 88.9-92.1
P 24 61.0
Q 35 88.9
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
Standardwidth
D
A
Range
Line of hood
above range
Line of wall
cabinets above
Min clearance between appliances
Range work zone
Wall oven work zone
Min
counter
space
required
foreither
sideof
range
Min
counter
space
required
toone
sideof
oven
Min
counter
space
required
foreither
sideof
range
Standardwidth
B
B
GH
C
F
B
E
140. Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces
RANGE CENTER
The drawing shows the clearances
of range work zone and wall oven
work zone .
code inch cm
A 48 121.9
B 40 101.6
C 15 38.1
D 21-30 53.3-76.2
E 1-3 2.5-7.6
F 15 38.1
G 19.5-46 49.5-116.8
H 12 30.5
I 17.5 44.5
J 96-101.5 243.8-257.8
K 24-27.5 61.0-66.9
L 24-26 61.0-66.0
M 30 76.2
N 60 152.4
O 35-36.25 88.9-92.1
P 24 61.0
Q 35 88.9
Circulation
Clearances
B
Range Work zone
Wall Oven Work zone
B
K A L
J
I
P
O
N
Standard Depth Min. Clearances between appliances Standard Depth
Storage
for rarely
used
items only
Storage for
rarely used
items only
Ventilati
on hood
Range
Broiler
Wall
Oven
Q
13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
141. R E S I D E N T I A L
Sleeping Spaces
The Drawings On The Following Pages Explore The Relationship Of Human Dimension To The Various
Components Of Sleeping Spaces, The Obvious Being The Bed Itself, Both In Its Conventional Form And In
Its Overhead Space-saving Design. Sleeping Space And Circulation Are Basic Considerations To Be
Taken. These Pages Are Related To Dimension Of A Room Occupying Bed, Closet, Storage, Etc. The
Following Drawings Examine Human Body Size, In Relation To The Various Design Situations Mentioned,
In Terms Of The Anthropometric Considerations.
142.
143. Project Report Drawing Title Date of Submission Submitted to Submitted by
Anthropometric 29 Sept 2016 Dezyne E’cole College
www.dezyneecole.com
Piyush Raj Singh
1 Year Residential Design
Diploma
TWIN BED / CLEARANCES AND DIMENSION
The drawing illustrates the
clearances suggested between
singles beds to allow for circulation ,
access , and making up the beds . A
minimum of 36 inch or 91.4 cm is
recommended .
Sleeping Spaces
Page -
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
144. Project Report Drawing Title Date of Submission Submitted to Submitted by
Anthropometric 29 Sept 2016 Dezyne E’cole College
www.dezyneecole.com
Piyush Raj Singh
1 Year Residential Design
Diploma
Sleeping Spaces
Page -
SINGLE BED/CLEARANCES AND
DIMENSION
The drawing indicates a kneeling
activity which would require a
clearances of 37 to 39 inch or 93 to
99 cm, where a of low height is
involved .
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
145. code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
BEDROOM/VISION AND SIGHT
LINES
O
VARIES
WINDOW SILL
SINGLE BED
TOP OF MATTRESS
EYE LEVEL STANDING POSITION
DIMENSION VARIES WITH
FURNITURE PLAN
EYE LEVEL RECLINING
POSITION
VARYINGSILLHEIGHTSEYE LEVEL SEATED POSITION
N
P
Q
R
J
The relationship between sight lines
and the sill or head of a window is
critical if a view to the outside is a
design consideration. Eye height in
sitting, standing, and reclining
positions to varying sill height is
shown.
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
146. CLEANING REQUIREMENTS
The drawing illustrates the clearances
involved for vacuuming under the bed
. A work zone of 48 to 54 inch or,
121.9 to 137.2 cm, is suggested to
accommodate this activity .
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
F
C BB
AVARIES
SINGLE BEDSINGLE BED
PILLOW PILLOW
VARIES
CIRCULATION
ZONE
TOP OF MATTRESS
D
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
147. MAKE UP / DRESSING TABLE
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
TABLE
D
F
B
H
G
J
I
H
ACTIVITY
ZONE
TASK
SURFACE OR
MIRROREYE LEVEL
TOP OF TABLE
K
It is difficult chair type to be design
or establish guidelines for, since it is
primarily intended for relaxation
and comfort –qualities which are
highly personal.
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
148. The drawing of this page shows the
clearances required between a
dresser and the bed .
code inch cm
A 108-114 274.3-
289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-
332.7
G 46-62 116.8-
157.5LINE OF BED OR
OBSTRUCTION
TOP OF MATTRESS
M
MIRROR
DRAWER
DRAWER
Q
BED
O
P
N
EYE LEVEL
ACTIVITY
DRESSER /BED CLEARANCES
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
149. The drawing shows the vertical
clearances necessary to
accommodate an adult of large
body sizes . The most essential
body measurement
anthropometrically is sitting height .
code inch cm
A 108-114 274.3-
289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-
332.7
A
UNDER SLEEPING
AREA
REQUIREDMINCEILINGHEIGHT
STORAGE UNDER BED
LOWER BUNK BED
TOP OF MATTRESS
LOWER
SLEEPING AREA
LINE OF
CONVECTIONAL
96 IN CEILING
HEIGHT
TOP OF MATTRESS
UPPER BUNK BED
VARIES
CCDB
FE
IH
J
ADULT BULK BEDS/FRONT ELEVATION
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
150. The drawing shows that a horizontal
clearances of 46 to 52 inch or 116.8
to 157.5 cm , is necessary for
comfortable access to the under
bed storage .
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
ADULT BULK BEDS/END ELEVATION
LOWER BUNK BED
LOWER
SLEEPING AREA
TOP OF MATTRESS
VARIES
C
G
LINE OF CONVECTIONAL 96 IN CEILING HEIGHT
K
J
A
STORAGE UNDER BED DRAWER
UNDER
SLEEPING AREA
G
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
151. The drawing shows the vertical
clearances necessary to
accommodate children . The critical
anthropometric consideration is the
sitting height .
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
CHILDREN’S BUNK BEDS/END ELEVATION
LINE OF WALL
OR
OBSTRUCTIONTYPICALCEILINGHEIGHT
LOWER BUNK BED
UPPER BUNK BED
A
H I
J K
G
CB
FED
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
152. The drawing of this page illustrates
the vertical clearances necessary for
a loft bed . To ensure that a person
can circulate under the bed without
hitting his head .
code inch cm
A 108-114 274.3-289.6
B 36-39 91.4-99.1
C 36 91.4
D 18-22 45.7-55.9
E 30 76.2
F 82-131 208.3-332.7
G 46-62 116.8-157.5
SLEEPING LOFTS/END ELEVATION
HM
CIRCULATION
UNDER LOFT
O
P
L
N
R
Q
REQUIREDOVERALLMIN.HEIGHT
assumemin.clearancesbaseduponcodes
S
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
153. The drawing show the vertical
clearances related to male and female
closet and storage facilities .
code inch cm
A 64-68 162.6-172.7
B 72-76 182.9-193.0
C 12-18 30.5-45.7
D 8-10 20.3-25.4
E 20-28 50.8-71.1
F 34-36 86.4-91.4
G 10-12 25.4-30.5
H 60-70 152.4-177.8
I 69-72 175.3-182.9
J 76 193.0
K 68 172.7
L 42 106.7
M 46 116.8
N 30 76.2
O 18 45.7
CLOSET AND STORAGE FACILITIES/MALE CLOSET AND STORAGE FACILITIES/FEMALE
D
G
SHOE
SHELF
H
HIGH SHELF
E F
C D
I
D
A
HIGH SHELF
SHOE
SHELF
B
E F
C D
G
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
154. The drawing illustrates two various
types of walk-in storage facilities .
code inch cm
A 64-68 162.6-172.7
B 72-76 182.9-193.0
C 12-18 30.5-45.7
D 8-10 20.3-25.4
E 20-28 50.8-71.1
F 34-36 86.4-91.4
G 10-12 25.4-30.5
H 60-70 152.4-177.8
I 69-72 175.3-182.9
J 76 193.0
K 68 172.7
L 42 106.7
M 46 116.8
N 30 76.2
O 18 45.7
VARIES
C
CF
N
HANGING
STORAGE
O
MINDOOR
OPENING
E
WALK IN CLOSET AND STORAGE FACILITIESWALK IN CLOSET AND STORAGE FACILITIES
VARIES
EEF
HANGING
STORAGE
C
N
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Cooking Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
155. R E S I D E N T I A L
Bathroom Spaces
One Of The Most Dramatic Example Of A Design Situation Where Little Consideration Is Given To The
Relationship Of Human Dimension And Body Size To The Designed Environment Can Be Found In
Practically Every Bathroom , Private And Public . Few Designers , Builders And Users Give Any Thought To
The Height Above The Floor Of A Lavatory . Hours , If Not Days , May Be Spent In The Selection Of The
Appropriate Color , Fixtures ,Model Or Trim . The Fact Is That It Is Not Natural For The Human Body To
Assume A Stooped Postures While Washing The Hands And Face . This Postures Necessitated , However
Because Most Basin Heights Are Only About 30 Inch Or 76.2 Cm Above The Floor . It Is Interesting To Note
That 3 Inch Is Also The Average Height Of A Desk , Or Dining Table , Yet If A Person Were Forced To Write
Or Eat From A Standing Position , Each Of The Surfaces Would Have To Be Raised At Least 6 To 12 Inch
Or 15.2 To 30.5 Cm .
156.
157. Code In cm
A 15-18 38.1-45.7
B 28-30 71.1-76.2
C 37-43 94.0-109.2
D 32-36 81.3-91.4
E 26-32 66.0-81.3
F 14-16 35.6-40.6
G 30 76.2
H 18 45.7
I 21-26 53.3-66.0
Drawing illustrates some basic
anthropometric considerations
related to the lavatory area. The
most obvious problem concerns the
height of the lavatory above the
floor. Greater than the height at
which lavatories are normally
installed, presumably to
accommodate the majority of the
population. The drawing indicates
the ranges for adult males, females,
and children of lavatory heights
suitable to accommodate a greater
portion of the respective
populations.
BATHROOMS
LAVATORY/GENERAL ANTHROPOMETRIC CONSIDERATIONS
BA
Mirror and
medicine cabinet
C
Varies
Varies
Lavatory
D
E
Male
Child(8-9)
Female
Vanity storage
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
158. Drawing indicates horizontal
clearances recommended in the
lavatory area. The most obvious
problem concerns the height of
the lavatory above the floor.
Greater than the height at which
lavatories are normally installed,
presumably to accommodate the
majority of the population. The
drawing indicates the ranges for
adult males, females, and children
of lavatory heights suitable to
accommodate a greater portion of
the respective populations.
BATHROOMS
DOUBLE LAVATORY CLEARANCES
Varies
Wall or other
obstruction
Activity zone
Circulation
zone
G H I
F
Code In cm
A 15-18 38.1-45.7
B 28-30 71.1-76.2
C 37-43 94.0-109.2
D 32-36 81.3-91.4
E 26-32 66.0-81.3
F 14-16 35.6-40.6
G 30 76.2
H 18 45.7
I 21-26 53.3-66.0
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
159. Code In cm
A 48 121.9
B 30 76.2
C 19-24 48.3-61.0
D 27 min 68.6 min
E 18 45.7
F 37-43 94.0-109.2
G 72 max 182.9 max
H 32-36 81.3-91.4
I 69 max 175.3 max
J 16-18 40.6-45.7
K 26-32 66.0-81.3
L 32 81.3
M 20-24 50.8-61.0
The drawing deals primarily with
some of the more critical male
anthropometric considerations
developed on the preceding page.
In order to establish the location of
mirrors above the lavatory, eye
height should be taken into
consideration.
BATHROOMS
LAVATORY/MALE ANTHROPOMETRIC CONSIDERATIONS
A
Mirror and
medicine
cabinet
Lavatory
B
C
Activity zoneCirculation
zone
F
E
CD
Mirror and
medicine
cabinet
Activity zone
Lavatory
GProject Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
160. The drawing showing
anthropometric consideration
related to women and children,
respectively. Given the great
variability in body sizes to be
accommodated within a single
family, a strong case can be
presented for the development of a
height adjustment capability for the
lavatory.
BATHROOMS
LAVATORY/FEMALE AND CHILD ANTHROPOMETRIC CONSIDERATIONS
M
K
Light fixtures
J
Lavatory
Vanity
Storage
L
Mirrors
Shelf
C
Mirror and
medicine
cabinet
Lavatory
I
Vanity
Storage
H
Code In cm
A 48 121.9
B 30 76.2
C 19-24 48.3-61.0
D 27 min 68.6 min
E 18 45.7
F 37-43 94.0-109.2
G 72 max 182.9 max
H 32-36 81.3-91.4
I 69 max 175.3 max
J 16-18 40.6-45.7
K 26-32 66.0-81.3
L 32 81.3
M 20-24 50.8-61.0
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
161. D
B
Bidet
Activity
zone
Towel
bar
The drawing showing
anthropometric consideration
related to the individual water
closet and bidet. Drawing
suggests an activity zone or
clearance between the face of a
water closet to the line of the wall
or nearest obstruction of at least
24in. Accessories in front or to the
side of the user should be within
reach. Thumb tip arm reach
should both be taken into
accounting locating these items
anthropometrically.
BATHROOMS
WATER CLOSET BIGET
G
Activity
zone
C
W.C.
Toilet
paper
dispe
nser
Varie
s
C
Line of wall or
obstruction
Line of wall or
obstruction
Code In cm
A 12 min 30.5 min
B 28 min 71.1 min
C 24 min 61.0 min
D 52 min 132.1 min
E 12-18 30.5-45.7
F 12 30.5
G 40 101.6
H 18 45.7
I 30 76.2
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
162. The drawing showing
anthropometric consideration
related to the individual water
closet and bidet. The two
drawings of the individual bidet
illustrates in a similar manner
some of the basic
anthropometric requirements
and clearances suggested for a
typical installation.
BATHROOMS
WATER CLOSET
Activity
zone
Shelf
Toilet paper
dispenser
Varie
s
F
Line of wall or
obstruction
Varie
s
AE
BIGET
Towel bar
Soap
holder
Line of wall or
obstruction
A
Control
s
B C
D
Code In cm
A 12 min 30.5 min
B 28 min 71.1 min
C 24 min 61.0 min
D 52 min 132.1 min
E 12-18 30.5-45.7
F 12 30.5
G 40 101.6
H 18 45.7
I 30 76.2
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
163. The drawing showing
anthropometric consideration
related to the individual water
closet and bidet The drawing
showing water closet with some
of the horizontal clearances
required when water closet and
bidet are located side by side.
BATHROOMS
BIGET AND WATER CLOSET
Towel bar
Varies
A
Varies
VariesVariesA
Circulation zoneActivity zone
W.C
Bidet
Soap
holder
Shower
Code In cm
A 12 min 30.5 min
B 28 min 71.1 min
C 24 min 61.0 min
D 52 min 132.1 min
E 12-18 30.5-45.7
F 12 30.5
G 40 101.6
H 18 45.7
I 30 76.2
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
164. Code In cm
A 54 137.2
B 12 30.5
C 42 min 106.7 min
D 18 45.7
E 36 min 91.4 min
F 30 76.2
G 24 61.0
H 12 min 30.5 min
I 15 38.1
J 40-48 101.6-
121.9
The size of a shower can vary
greatly depending on the level of
comfort desired. Safety is also an
extremely important
consideration. Unless a fairly
reliable mixing value capable of
presetting a fixed and desirable
water temperature is provided,
care should be taken to locate
controls within reach but out of
direct line of the water path in
order to avoid scalding or freezing
while operating the controls.
BATHROOMS
MINIMUM SHOWER CLEARANCE
F
Temporary
storage
Varies
Circulation access zone
G
Vertical
grab bar
E
D
Seat
Shower
head
Controls
Horizontal
grab bars
A
B C
I
H
Shower
head
B C
A
Controls
J
Grab bars
Seat
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
165. The drawing clearance between
walls. It will not only accommodate
the variety of body positions shown,
but will also allow a small seating
surface. The height of the
adjustable shower should be within
reach of the adult of smaller body
size.
BATHROOMS
SHOWER/CHILD ANTHROPOMETRIC
CONSIDERATION
SHOWER/REACH AND CLEARANCES
Varies
Controls
Adj. Shower
head
Grab
bars
Temporary
storage
Seat
K
Shower
head
Grab
bars
Seat
Controls
Temporary
storage
K
J
L
Code In cm
A 54 137.2
B 12 30.5
C 42 min 106.7 min
D 18 45.7
E 36 min 91.4 min
F 30 76.2
G 24 61.0
H 12 min 30.5 min
I 15 38.1
J 40-48 101.6-
121.9
K 40-50 101.6-
127.0
L 72 min 182.9 min
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
166. SHOWER / TUB
code inch cm
A 18-21 45.7-53.3
B 40 101.6
C 15-22 38.1-55.9
D 30-34 76.2-86.4
E 40-50 101.6-127.0
F 66 167.6
G 12 30.5
H 18 45.7
I 26-27 66.0-68.6
J 40-44 101.6-111.8
K 66-70 167.6-177.8
L 56-60 142.2-152.4
The drawing illustrates some of the
basic clearances required for a
combination shower and tub.
Dimension concerning the shower
head are similar to those indicated
on the preceding page .
C
Varies
B
A
D
E
Temporary
Storage Shower
Control
Controls
Seat
Non Slip
Surface
Angle
VariesC
F G
H
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
167. Drawing illustrates user enjoying
recycling and soaking for extended
periods, a large-size tub may not
necessarily be the wisest selection.
The length of the tub at the
bottom surface should
approximate the buttock-heel
length of the smaller user. This will
allow the feet to bear against the
end of the tub and act as a brace
to prevent the body from sliding
too far under the water.
BATHROOMS
TUB/RECLINING AND RELAXING
Line of wall or
obstruction
H
G
Seat
Angle
varies
C
Nonslip surface
F
Code In cm
C 42 min 106.7 min
F 66 167.6
G 12 min 30.5 min
H 18 max 45.7 max
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
168. Drawing indicates the necessity
to accommodate two people in
the tub at same time.
BATHROOMS
SINGLE AND DUAL BATHING
Grab
bar
L
I
J
K
Grab
bar
Code In cm
I 26-27 66.0-68.6
J 40-44 101.6-
111.8
K 66-70 167.6-
177.8
L 56-60 142.2-
152.4
Project Report Drawing Title Date of Submission Submitted to Submitted by
Residential Design
Basic Assignments
Anthropometric 23rd Nov.’ 2016 Dezyne E’cole College
www.dezyneecole.com
Milli Jain
B.Sc.- ID + 1 Year Residential
Design Diploma
169. R E S I D E N T I A L
Laundry Room Spaces
Home Laundry Includes The Process From Sorting Through Ironing Of Clothes And House Hold Linens ,
Including Pretreating Washing , Drying And Sprinkling . It Is Desirable To Plan Space For Specific Laundry
Process . Drying Area Should Be Accessible For Use Under All Climatic Conditions . To Control The
Moisture In The Room , Dryers Should Be Located To Permit Venting To The Outside Of The House .
Adequate Storage For Washing Equipment And Supplies Should Be Located Near The Place Of First Use
. Facilities For Hanging Drip-dry Garments After Washing Should Be Provided . In Locating The Washing
Equipment Consideration Should Be Given To Convenience Of Inter-related House Hold Activities ,
Distances From The Source Of Soled Clothes And Drying Areas And The Isolation Of Clutter .
170.
171. code inch
A 59
B 76
C 62
D 36
E 66
A
B
Work area
Dryer
Washer
C
D
LAUNDARY SPACES
Drawing illustrates the
arrangements of laundry
equipment. Space needed by the
single worker in front of equipment
or between equipment placed
opposite is indicated. Overall
dimensions of areas will vary with
type and size of equipment
selected. No allowance has been
made between the back of
equipment and the wall for
electrical, plumbing, and dryer vent
connections. The space required
will depend on the type of
installation used. counter space is
provided for sorting and folding
three washer loads of clothes.
ANGLE ARRANGEMENT CONVENTIONAL ARRANGEMENT
A
Work area
DryerWasher
E
D
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Laundry Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
172. code Key Inch
A Storage Closet 24
B Sorting Shelf 36
C Laundry Tray 24
D Washing Machine 30
E Dryer 30
F Ironer 60
G Ironing Board 48
D
C
B
A
E
F
G
Pole &
Shelf
( Open )
(Vent)
B
A
C
D
E
F
GH
Pole &
Shelf
To Kitchen
To Drying
Yard
( Open )
(Vent)
The ideal location of the laundry space is
a matter of preference. The laundry area
may be separate or combined with the
bathroom, the kitchen, the utility space,
or the corridor.
LAUNDARY SPACES
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Laundry Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
173. code Key Inch
A Storage Closet 24
B Sorting Shelf 24
C Laundry Tray 20
D Washing Machine 24
E Dryer 24
F Ironer 36
G Ironing Board 42
LAUNDARY SPACES
The sequence of laundering
operations determines the planning
of space and facilities and the
placing of equipment. Convenience
and time –and- space saving are
easily achieved by placing the
elements in their natural order of
use as mentioned in table. In
addition, storage closet or cabinets
will be necessary for soaps,
powders, bling, bleaches, starch,
basket, cloths pins ,iron ,etc.
KITCHEN AND LAUNDRY LAYOUT
To dining
room
Snack bar
Laundry
Des k
Shelf
4
Omit
E.P
3
1
5
6
Vent
7
Kitchen Closet
To hall
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Laundry Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
174. R E S I D E N T I A L
Closet Spaces
Closet Space Is Designed According To Human Needs , Preferences . Vertical Clearances Related To Male And Female
Closet And Storage Facilities Is Considered . The Closet Shelf Should Be Within Human Reach Whenever Is Possible . The
Height Of The High Shelf Has Been Established Based On Fifth Percentile Male And Female Data Order To Place It Within
Reach Of Individuals Of Smaller Body Size . The Location Of The Shelf Just Above The Rod Is Essentially A Function Of Rod
Height . The Clearances Between The Bottom Of The Shelf And The Top Of The Rod Should Allow For Easy Removal Of
The Hanger .
175.
176. Code In cm
A 64-68 162.6-172.7
B 72-76 182.9-193.0
C 12-18 30.5-45.7
D 8-10 20.3-25.4
E 20-28 50.8-71.1
F 34-36 86.4-91.4
G 10-12 25.4-30.5
H 60-70 152.4-177.8
I 69-72 175.3-182.9
It is difficult chair type to be design,
or establish guidelines for, since it is
primarily intended for relaxation
and comfort– qualities which are
highly personal.
CLOSET SPACES
CLOSET AND STORAGE FACILITIES/MALE CLOSET AND STORAGE FACILITIES/FEMALE
D
G
SHOE
SHELF
H
HIGH SHELF
E F
C D
I
D
A
HIGH SHELF
SHOE
SHELF
B
E F
C D
G
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Closet Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
177. Code In Cm
J 76 193.0
K 68 172.7
L 42 106.7
M 46 116.8
N 30 76.2
O 18 45.7
It is difficult chair type to be design
,or establish guidelines for , since it
is primarily intended for relaxation
and comfort –qualities which are
highly personal.
CLOSET SPACES
VARIES
C
CF
N
HANGING
STORAGE
O
MINDOOR
OPENING
E
WALK IN CLOSET AND STORAGE FACILITIESWALK IN CLOSET AND STORAGE FACILITIES
VARIES
EEF
HANGING
STORAGE
C
N
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Closet Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
178. CLOTHES CLOSET : The capacity of a
clothes closet depends upon the
accessible length of rod . Three types
of closet are common .
1. Reach-in Closet : The minimum
front to back depth of space for
hanging clothes is 24 inches . The
accessible rod length is equal to
the width of the door opening
plus 6 inch on each side .
2. Edge-in Closet : By providing an
edge of at least 18 inch , the
accessible rod length can be much
longer than the door width . This
requires less wall space than a full
front opening .
3. Walk-in Closet : This type
provides rods on one or both sides
of an access path at least 20 inch
wide . A wider access space within
the closet may be used as a
dressing area .
6”
Max.
6”
Max.
Accessible Rod Length Accessible Rod Length
24” min. 24” min. door
24” min. door
42”min.
AccessibleRod
Length.
24” min.24” min. 20” min.
68” min.
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Closet Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
179. 2’0”To3’0”
4’0” To 6’0”
6’0” & Larger 6’8” & Larger
2’0” To 4’0”
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric closet Spaces 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma
180. 3’0”To4’0”
4’0”To5’0”
4’0”&Larger
5’6”&Larger
5’0” & Larger 5’0” & Larger
Shelves Shelves
Dresser
Shelves
Project Report Drawing Title Date of Submission Submitted to Submitted by
Dezyne E’cole College
www.dezyneecole.com
Anthropometric Closet space 13 Feb 2017 Milli Jain
B.Sc- ID + 1 Year Residential Design
Diploma