This document provides information about measuring errors of analog and digital instruments. For analog instruments, accuracy is typically expressed as a percentage of the full scale reading. The error can be ±3% of the measured value if it is in the last third of the scale, but increases if further from the full scale value. Digital multimeters have resolution defined by the number of display digits, such as ±0.05% for 31⁄2 digits. They may also have automatic or manual range selection to ensure accurate readings in the optimal scale region.
Osnove elektrotehnike vežbe gradivo za 2. test
Literatura
Nadica Miljkovic ETF Instrumentacija za elektricna merenja
M.Mitrovic, A. Zekic, FF, Didaktika fizike
INternet
This document provides information about measuring errors of analog and digital instruments. For analog instruments, accuracy is typically expressed as a percentage of the full scale reading. The error can be ±3% of the measured value if it is in the last third of the scale, but increases if further from the full scale value. Digital multimeters have resolution defined by the number of display digits, such as ±0.05% for 31⁄2 digits. They may also have automatic or manual range selection to ensure accurate readings in the optimal scale region.
Osnove elektrotehnike vežbe gradivo za 2. test
Literatura
Nadica Miljkovic ETF Instrumentacija za elektricna merenja
M.Mitrovic, A. Zekic, FF, Didaktika fizike
INternet
7. Примена microbit –а у физици
1. Брзина реакције
Jedna od poteškoca na koju nailazimo pri merenju vremena je brzina
naše reakcije.
To je jako kratki vremenski interval u kojem naše oko vidi početak nekog događaja,
mozak sve to analizira i šalje naredbu ruci za pocetak merenja.
Bitno je uskladiti početak merenja s početkom nekog događaja,
neke pojave koju želimo analizirati.
10. Примена microbit –а у физици
1. Брзина реакције
Како да израчунамо време реакције ?
𝑡 =
2ℎ
𝑔
Направимо нашу табелу у EXCEL-у
11. Примена microbit –а у физици
1. Брзина реакције помоћу micro:bit-a
Pritiskom na taster A počinje odbrojavanje (3, 2, 1)
nakon toga se nasumično na LED ekranu pojaviti jedna tačkica
čim ugledamo tačkicu pritisnemo taster B na micro:bit-u
na ekranu će se pojaviti vreme reakcije odnosno vreme koje nam je bilo
potrebno da bismo uočili tačkicu na LED ekranu
Ako pritisnemo taster B pre pojavljivanja tačkice, micro:bit ispisuje X
Zapišemo rezultat u tabelu