This document provides information about measuring errors of analog and digital instruments. For analog instruments, accuracy is typically expressed as a percentage of the full scale reading. The error can be ±3% of the measured value if it is in the last third of the scale, but increases if further from the full scale value. Digital multimeters have resolution defined by the number of display digits, such as ±0.05% for 31⁄2 digits. They may also have automatic or manual range selection to ensure accurate readings in the optimal scale region.
Osnove elektrotehnike vežbe gradivo za 2. test
Literatura
Nadica Miljkovic ETF Instrumentacija za elektricna merenja
M.Mitrovic, A. Zekic, FF, Didaktika fizike
INternet
This document discusses the effects of electricity on the human body, measures to protect workers, and providing first aid. It lists several links to resources about the physiological effects of electricity, shock current paths, Ohm's Law, safe work practices, emergency response, common hazards, safe circuit design, safe meter usage, and electric shock data. Students are given questions to check their understanding and assigned a translation homework from the provided texts for a good grade.
This document provides information about measuring errors of analog and digital instruments. For analog instruments, accuracy is typically expressed as a percentage of the full scale reading. The error can be ±3% of the measured value if it is in the last third of the scale, but increases if further from the full scale value. Digital multimeters have resolution defined by the number of display digits, such as ±0.05% for 31⁄2 digits. They may also have automatic or manual range selection to ensure accurate readings in the optimal scale region.
Osnove elektrotehnike vežbe gradivo za 2. test
Literatura
Nadica Miljkovic ETF Instrumentacija za elektricna merenja
M.Mitrovic, A. Zekic, FF, Didaktika fizike
INternet
This document discusses the effects of electricity on the human body, measures to protect workers, and providing first aid. It lists several links to resources about the physiological effects of electricity, shock current paths, Ohm's Law, safe work practices, emergency response, common hazards, safe circuit design, safe meter usage, and electric shock data. Students are given questions to check their understanding and assigned a translation homework from the provided texts for a good grade.
4. 1. Проводност материјала
Задатак
Израдите програм за micro:bit којим ћете уз помоћу крокодилки испитивати електричну
проводност различитих материјала. Прислањањем крокодилки на материјал на панелу
micro:bita нека се прикаже квачица ако материјал проводи струју, односно икс ако не проводи.
Примена microbit – а у физици
11. mBot
mBot robot
mBot robot je posebno dizajniran edukacioni alat za sticanje znanja i veština u STEM području.
12. mBot
mBot robot
Softver za programiranje mBot robota zove se mBlock i moguće ga je preuzeti na PC ili pametni u
ređaj s linka: http://www.mblock.cc/software/. mBlock je grafički softver za programiranje u kojem
se program izrađuje povlačenjem i spajanjem blokova kôda. Isprogramirati se može način kretanja
robota, rad motora, komunikacija među robotima, svetljenje dioda, senzori i drugo.
13. Senzor za praćenje linije
• Senzor za praćenje linije se nalazi ispod robota. Sastoji se od dva
senzora, senzora 1 i 2, od kojih svaki ima infracrveni odašiljač i
infracrveni prijemnik.
• Infracrveni odašiljač neprekidno emituje infracrvenu svetlost tokom
kretanja mBota. Infracrveno svetlo se reflektuje kada se mBot
susreće s belom ili nekom drugom svetlom površinom i tada
prijemnik prima infracrveni signal i upravljačkoj pločici šalje
vrednost 1.
• Ako se infracrveno svetlo apsorbuje ili se ne može odraziti (na
tamnim površinama), prijemnik neće primiti infracrveni signal, ali
šalje vrednost 0.
15. Zadatak
• Isprogramirajte mBot tako da se kreće
praćenjem crne linije na stazi koju ste dobili uz
robota (ležeća osmica).
• mBot neka prati crnu liniju s oba senzora
unutar linije. Pritiskom na C mBot neka krene s
izvršavanjem programa.
17. Ultrazvučni senzor
(senzor za prepoznavanje prepreka)
• Ultrazvučni senzor je elektronski modul za
merenje udaljenosti robota od nekog drugog
objekta (prepreke). Može detektovati prepreke
na udaljenosti od 3 do 400 cm (pod uglom od
30⁰). Povezuje se na port sa žutom oznakom.
19. Zadatak
• Isprogramirajte mBot da se kreće sve dok ne
naiđe na prepreku. Kad naiđe na prepreku
neka se zaustavi na udaljenosti manjoj od 10
centimetara od nje i neka upali crvena svetla.
Pritiskom na B neka krene s vožnjom prema
prepreci i dok se vozi neka svetli zeleno.