Metal fabrication - Canada and United states - November 2017
•Download as PPTX, PDF•
0 likes•48 views
This document provides a summary and analysis of the metal fabrication market in Canada and the United States in November 2017. It includes an agenda with topics like commodity indexes, automotive and agricultural equipment sales, steel production, and metal processing center shipments. The document was created by Paul Young, a CPA and subject matter expert in various fields including risk management, reporting, and supply chain management. It analyzes current industry data and trends to give an overview of the state of the metal fabrication market in November 2017.
Report
Share
Report
Share
Recommended
Steel Industry – Canada and USA – January 2018
Steel is important industry for both Canada and United States
Both Canada and USA have seen steel plants shutter since 2008
Local content rules will drive steel production, especially as it relates to infrastructure projects
Canada and Brazil are the top exporters of steel into the United States.
Tariffs do not work as all they do is forced up consumer prices
Steel Industry - Canada and United States - January 2018
Steel is important industry for both Canada and United States
Both Canada and USA have seen steel plants shutter since 2008
Local content rules will drive steel production, especially as it relates to infrastructure projects
Manufacturing - Canada– August 2017
Paul Young, a CPA and CGA, prepared a report in October 2017 on the state of the Canadian manufacturing sector in August 2017. The report included statistics from StatsCanada on manufacturing sales by key sector, durable goods vs non-durable goods, GDP, wages, and employment in manufacturing. It also provided the Purchasing Managers' Index for Canada and discussed the positions of the Liberal Party of Canada and the Canadian Manufacturers and Exporters organization on manufacturing issues.
Economy - Alberta - July 2017 - analysis and commentary
This document provides an analysis of Alberta's economy in July 2017 by Paul Young, a CPA and CGA. It includes brief summaries of GDP and GDP by sector in Alberta from 2014 to 2017, with little change observed except in public administration. Charts on oil prices/oil rigs, oil production in Canada, and employment in Alberta are referenced. Sources are provided for per capita spending in Alberta compared to BC and criticism of Alberta's Minister of Finance for out-of-control government agency spending. Contact information is included for Paul Young.
Manufacturing in Crisis
Manufacturing has gone through many changes over the past 40 years. MFG are always looking at better ways to make their products as well as deal with consumer trends.
Decline in manufacturing has led to less union jobs. Major unions need to change their approach including how they managed training and skills development for their members.
Manufacturing| Canada| November 2018
Manufacturing sales fell 1.4% to $57.3 billion in November, the second consecutive monthly decrease. The decline
in November mainly reflected lower sales of petroleum and coal products. Excluding this industry, manufacturing
sales rose 0.2%.
Supply Chain Management - United States - October 2017
This document provides a summary of supply chain management in the United States in September 2017. It was authored by Paul Young, a CPA and supply chain management expert. The document outlines that Class 8 truck sales increased 29% month-over-month in September 2017, surpassing 2016 year-to-date numbers. Commodity and freight transportation indexes are also discussed. The outlook for the 2017 Christmas retail season is predicted to be stronger than previous years. Contact information is provided for Paul Young.
Steel market - Canada and United States - September 2017
This document is a presentation by Paul Young from October 2017 about the steel markets in Canada and the United States in September 2017. It provides an overview and agenda that includes steel production, metal fabrication trends in key segments, and steel processing center changes. Sources of information are cited from organizations like Worldsteel and Scotiabank.
Recommended
Steel Industry – Canada and USA – January 2018
Steel is important industry for both Canada and United States
Both Canada and USA have seen steel plants shutter since 2008
Local content rules will drive steel production, especially as it relates to infrastructure projects
Canada and Brazil are the top exporters of steel into the United States.
Tariffs do not work as all they do is forced up consumer prices
Steel Industry - Canada and United States - January 2018
Steel is important industry for both Canada and United States
Both Canada and USA have seen steel plants shutter since 2008
Local content rules will drive steel production, especially as it relates to infrastructure projects
Manufacturing - Canada– August 2017
Paul Young, a CPA and CGA, prepared a report in October 2017 on the state of the Canadian manufacturing sector in August 2017. The report included statistics from StatsCanada on manufacturing sales by key sector, durable goods vs non-durable goods, GDP, wages, and employment in manufacturing. It also provided the Purchasing Managers' Index for Canada and discussed the positions of the Liberal Party of Canada and the Canadian Manufacturers and Exporters organization on manufacturing issues.
Economy - Alberta - July 2017 - analysis and commentary
This document provides an analysis of Alberta's economy in July 2017 by Paul Young, a CPA and CGA. It includes brief summaries of GDP and GDP by sector in Alberta from 2014 to 2017, with little change observed except in public administration. Charts on oil prices/oil rigs, oil production in Canada, and employment in Alberta are referenced. Sources are provided for per capita spending in Alberta compared to BC and criticism of Alberta's Minister of Finance for out-of-control government agency spending. Contact information is included for Paul Young.
Manufacturing in Crisis
Manufacturing has gone through many changes over the past 40 years. MFG are always looking at better ways to make their products as well as deal with consumer trends.
Decline in manufacturing has led to less union jobs. Major unions need to change their approach including how they managed training and skills development for their members.
Manufacturing| Canada| November 2018
Manufacturing sales fell 1.4% to $57.3 billion in November, the second consecutive monthly decrease. The decline
in November mainly reflected lower sales of petroleum and coal products. Excluding this industry, manufacturing
sales rose 0.2%.
Supply Chain Management - United States - October 2017
This document provides a summary of supply chain management in the United States in September 2017. It was authored by Paul Young, a CPA and supply chain management expert. The document outlines that Class 8 truck sales increased 29% month-over-month in September 2017, surpassing 2016 year-to-date numbers. Commodity and freight transportation indexes are also discussed. The outlook for the 2017 Christmas retail season is predicted to be stronger than previous years. Contact information is provided for Paul Young.
Steel market - Canada and United States - September 2017
This document is a presentation by Paul Young from October 2017 about the steel markets in Canada and the United States in September 2017. It provides an overview and agenda that includes steel production, metal fabrication trends in key segments, and steel processing center changes. Sources of information are cited from organizations like Worldsteel and Scotiabank.
Automotive Sector| May 2020| Analysis and Commentary
This document discusses automotive sales trends in the United States and Canada. It provides data on total annual automotive sales in both countries as well as sales numbers specifically for May 2020. It also covers topics around automation and productivity in the automotive sector, including the increasing use of laser welding, robotics, 3D printing, and efforts to reduce emissions and improve fuel standards. The document encourages reviewing additional material to learn more about related economic and policy issues.
Key Macro/Micro Indicators - Canada and USA - July 2020 and August 2020
This document provides an agenda for reviewing key macroeconomic indicators for Canada and the United States. It includes sections on GDP, housing, commodities, manufacturing sales, durable goods orders, retail sales, and other metrics for both countries for July and August 2020. Sources are cited from organizations like Statistics Canada, BMO, RBC, CIBC, TD Economics and US government agencies.
Key industry and Economic Indicators - Canada and USA - June 2017 and May 2017
This document summarizes key market and economic indicators for Canada and the US in May and June 2017. It includes statistics on steel production, freight transportation, automotive sales, oil sector activity, and other indicators. Paul Young provides contact information and background as a CPA and expert in financial solutions, risk management, and various sectors of the economy. Sources are provided for each set of economic data.
Automotive sector - December 2017
- The document provides an overview of the automotive sector in December 2017, focusing on sales, production volumes, and plug-in electric vehicle trends in various regions.
- Key points include that the automotive sector is important to both consumer spending and trade between Canada, US, and Mexico. Almost 10% of US vehicle sales are now electric vehicles. Norway has strong incentives for electric vehicles which have led to over half of new car sales being electric or hybrid. The future of the North American automotive sector may be impacted by renegotiations of NAFTA.
Agriculture and Mining sector - Canada and USA - August 2017
Here is a look at mining and ag sector for Canada. The presentation will look at capital purchases as well as commodity prices.
The presentation will also discuss government policies like taxation and Agenda 2030.
Automotive Market - August 2017
Paul Young, a CPA and CGA, analyzed the automotive market in August 2017. He looked at automotive production and sales numbers in Canada and the US. Electrical vehicle sales are growing in both countries according to sources. However, the Canadian automotive manufacturing sector has been shrinking as plants move to lower cost areas in the southern US and Mexico due to "Right to Work" laws.
Metal fabrication - Canada and United States - June 2017 and July 2017
Metal fabrication is key sector of the economy. This presentation looks at key areas of metal fabrication in terms of what is happening with the various sub sectors within metal fabrication.
Manufacturing| Analysis and Commentary| August 2020
The document provides an agenda for analyzing and commenting on the manufacturing sector. It includes sections that will discuss recent data and trends regarding US and Canada industrial production and manufacturing activity. It also outlines how it will examine global manufacturing conditions. The document indicates it will analyze how technologies like artificial intelligence, robotic process automation, and analytics are increasingly being used in manufacturing to support workers and drive efficiency. Contact information is provided for Paul Young, the author of the analysis.
Key Metrics and Trends - Canada and United States - April 2017 and May 2017
This presentation looks at key sectors of the economy as part understanding what is happening with economy in both Canada and USA.
Gross Domestic Product (GDP) - Canada - June 2017
GDP is starting to slow down based on the June 2017 numbers. The goods producing sector are starting to see slower growth for the remainder of 2017.
Metal fabrication sector – Canada and United States - October 2017
This document summarizes recent trends in the metal fabrication sector in Canada and the United States. It discusses shipments from metal processing centers surging in October 2017 according to industry reports. Steel production numbers from October 2017 are also presented from the world steel organization. The document concludes by noting durable goods numbers from the United States in a BMO Capital Markets report. Contact information is provided for Paul Young, the author.
Automotive - Canada and USA - September 2017
Paul Young, a CPA and expert in various business fields, summarized automotive industry trends in Canada and the United States for September 2017. GM announced plans to introduce 18 new fully electric vehicles by 2023 as part of a shift away from gasoline. A trade deficit exists in North America due to automotive part exports to Mexico doubling since 2009 under NAFTA. GM's CAMI plant strike could impact ongoing union drives at Toyota and Honda plants in Ontario. Rising costs and taxes are hurting Canadian competitiveness in automotive manufacturing.
Raw Materials| Clean Technology Products
This presentation discusses clean technology raw materials, including rare metals production and markets. It notes that China dominates global production of many rare metals essential for clean technologies like electric vehicles and energy storage. The presentation also outlines major lithium, vanadium, graphite, and copper producers and discusses Canada's opportunities and challenges regarding developing its clean technology raw materials sector. It emphasizes the need for a balanced approach between environmental and economic priorities.
Manufacturing Sector| Canada| December 2018
Manufacturing is about 11% of GDP. MFG is under stress due to tax changes and excessive regulations
More and more Canadian manufacturing is adopting 3-D Printing - https://www.smitherspira.com/resources/2017/july/3d-printing-reaching-the-mainstream
Trudeau never had the answers for manufacturing other dangling a few carrots.
Key Macro and Micro Indicators| Canada and USA| May 2020 and June 2020
This document provides a summary of key macroeconomic and microeconomic indicators for Canada and the United States. It includes data on retail sales, manufacturing sales, oil rigs and pricing, inflation rates, GDP, personal income, consumer confidence, and other economic metrics. The presentation is delivered by Paul Young, a CPA and expert in academia, risk management, and various aspects of business and public policy. Sources of the economic data are noted throughout.
Provincial Forecast and Scorecard - Canada - October 2017
The document is a provincial forecast and scorecard for Canada authored by Paul Young, CPA, CGA in October 2017. It includes Paul's background and expertise, then outlines an agenda covering a fiscal update from BMO Economics, GDP forecast, provincial scorecard, and trade exposure. Risks are also listed such as cost competitiveness, NAFTA, government debt, and deficits.
GDP - Canada - August 2017
Canada's GDP for August 2017 is flat with July 2017 GDP. The economy is showing signs of slowing down.
Power generation - September 2017 - Canada
- This document provides a summary of power generation in Canada from September 2017. It includes information on power generation by source in Canada and blogs about BC Hydro and Ontario Power Generation. It also references the UN's Agenda 2030 sustainable development goals. The author is Paul Young, a CPA and subject matter expert in various fields, who provides his contact information.
Agriculture sector – Canada and United States – October 2017
The document is a report by Paul Young, CPA, CGA on the agriculture sectors in Canada and the United States in October 2017. It includes Paul Young's background and contact information. The agenda outlines that it will discuss the relationship between agricultural equipment sales and commodity prices, commodity price indexes, and statistics on food processing sales, exports and job creation from sources including the Association of Equipment Manufacturers and Scotia Bank.
British columbia [ Analysis - July 2017
Here is a quick look at British Columbia. British Columbia is faced with a few issues including wild fires and change in government.
Retail Sales and Consumer Spending Analysis and Commentary - July 2023.pptx
Canadian retail sales dropped 0.3% in August, the first decline since March, as higher interest rates start to impact household budgets. Seven of the nine retail subsectors saw sales increases in July, led by food and beverage retailers, while motor vehicle and parts dealers saw the largest decrease. Excluding autos, retail sales in July rose 1%, double expectations. The report suggests Canadians are tightening spending as more face higher mortgage payments and gas prices due to Bank of Canada rate hikes aimed at slowing inflation.
Addressing issues with the Public Sector Governance Model.pptx
The key challenges facing Australian business leaders in 2023 include:
1. Talent acquisition, retention and training staff for digital transformation.
2. Implementing successful digital transformation while managing cyber risks.
3. Adapting to changing regulations and reporting requirements.
Health risks from COVID-19, social reputation concerns, and disruptive emerging technologies are also significant social challenges impacting Australian businesses. Over the next 3-5 years, talent management for digitization, cybersecurity, digital transformation, regulatory changes, and identifying new growth opportunities will be the top challenges according to business leaders.
More Related Content
Similar to Metal fabrication - Canada and United states - November 2017
Automotive Sector| May 2020| Analysis and Commentary
This document discusses automotive sales trends in the United States and Canada. It provides data on total annual automotive sales in both countries as well as sales numbers specifically for May 2020. It also covers topics around automation and productivity in the automotive sector, including the increasing use of laser welding, robotics, 3D printing, and efforts to reduce emissions and improve fuel standards. The document encourages reviewing additional material to learn more about related economic and policy issues.
Key Macro/Micro Indicators - Canada and USA - July 2020 and August 2020
This document provides an agenda for reviewing key macroeconomic indicators for Canada and the United States. It includes sections on GDP, housing, commodities, manufacturing sales, durable goods orders, retail sales, and other metrics for both countries for July and August 2020. Sources are cited from organizations like Statistics Canada, BMO, RBC, CIBC, TD Economics and US government agencies.
Key industry and Economic Indicators - Canada and USA - June 2017 and May 2017
This document summarizes key market and economic indicators for Canada and the US in May and June 2017. It includes statistics on steel production, freight transportation, automotive sales, oil sector activity, and other indicators. Paul Young provides contact information and background as a CPA and expert in financial solutions, risk management, and various sectors of the economy. Sources are provided for each set of economic data.
Automotive sector - December 2017
- The document provides an overview of the automotive sector in December 2017, focusing on sales, production volumes, and plug-in electric vehicle trends in various regions.
- Key points include that the automotive sector is important to both consumer spending and trade between Canada, US, and Mexico. Almost 10% of US vehicle sales are now electric vehicles. Norway has strong incentives for electric vehicles which have led to over half of new car sales being electric or hybrid. The future of the North American automotive sector may be impacted by renegotiations of NAFTA.
Agriculture and Mining sector - Canada and USA - August 2017
Here is a look at mining and ag sector for Canada. The presentation will look at capital purchases as well as commodity prices.
The presentation will also discuss government policies like taxation and Agenda 2030.
Automotive Market - August 2017
Paul Young, a CPA and CGA, analyzed the automotive market in August 2017. He looked at automotive production and sales numbers in Canada and the US. Electrical vehicle sales are growing in both countries according to sources. However, the Canadian automotive manufacturing sector has been shrinking as plants move to lower cost areas in the southern US and Mexico due to "Right to Work" laws.
Metal fabrication - Canada and United States - June 2017 and July 2017
Metal fabrication is key sector of the economy. This presentation looks at key areas of metal fabrication in terms of what is happening with the various sub sectors within metal fabrication.
Manufacturing| Analysis and Commentary| August 2020
The document provides an agenda for analyzing and commenting on the manufacturing sector. It includes sections that will discuss recent data and trends regarding US and Canada industrial production and manufacturing activity. It also outlines how it will examine global manufacturing conditions. The document indicates it will analyze how technologies like artificial intelligence, robotic process automation, and analytics are increasingly being used in manufacturing to support workers and drive efficiency. Contact information is provided for Paul Young, the author of the analysis.
Key Metrics and Trends - Canada and United States - April 2017 and May 2017
This presentation looks at key sectors of the economy as part understanding what is happening with economy in both Canada and USA.
Gross Domestic Product (GDP) - Canada - June 2017
GDP is starting to slow down based on the June 2017 numbers. The goods producing sector are starting to see slower growth for the remainder of 2017.
Metal fabrication sector – Canada and United States - October 2017
This document summarizes recent trends in the metal fabrication sector in Canada and the United States. It discusses shipments from metal processing centers surging in October 2017 according to industry reports. Steel production numbers from October 2017 are also presented from the world steel organization. The document concludes by noting durable goods numbers from the United States in a BMO Capital Markets report. Contact information is provided for Paul Young, the author.
Automotive - Canada and USA - September 2017
Paul Young, a CPA and expert in various business fields, summarized automotive industry trends in Canada and the United States for September 2017. GM announced plans to introduce 18 new fully electric vehicles by 2023 as part of a shift away from gasoline. A trade deficit exists in North America due to automotive part exports to Mexico doubling since 2009 under NAFTA. GM's CAMI plant strike could impact ongoing union drives at Toyota and Honda plants in Ontario. Rising costs and taxes are hurting Canadian competitiveness in automotive manufacturing.
Raw Materials| Clean Technology Products
This presentation discusses clean technology raw materials, including rare metals production and markets. It notes that China dominates global production of many rare metals essential for clean technologies like electric vehicles and energy storage. The presentation also outlines major lithium, vanadium, graphite, and copper producers and discusses Canada's opportunities and challenges regarding developing its clean technology raw materials sector. It emphasizes the need for a balanced approach between environmental and economic priorities.
Manufacturing Sector| Canada| December 2018
Manufacturing is about 11% of GDP. MFG is under stress due to tax changes and excessive regulations
More and more Canadian manufacturing is adopting 3-D Printing - https://www.smitherspira.com/resources/2017/july/3d-printing-reaching-the-mainstream
Trudeau never had the answers for manufacturing other dangling a few carrots.
Key Macro and Micro Indicators| Canada and USA| May 2020 and June 2020
This document provides a summary of key macroeconomic and microeconomic indicators for Canada and the United States. It includes data on retail sales, manufacturing sales, oil rigs and pricing, inflation rates, GDP, personal income, consumer confidence, and other economic metrics. The presentation is delivered by Paul Young, a CPA and expert in academia, risk management, and various aspects of business and public policy. Sources of the economic data are noted throughout.
Provincial Forecast and Scorecard - Canada - October 2017
The document is a provincial forecast and scorecard for Canada authored by Paul Young, CPA, CGA in October 2017. It includes Paul's background and expertise, then outlines an agenda covering a fiscal update from BMO Economics, GDP forecast, provincial scorecard, and trade exposure. Risks are also listed such as cost competitiveness, NAFTA, government debt, and deficits.
GDP - Canada - August 2017
Canada's GDP for August 2017 is flat with July 2017 GDP. The economy is showing signs of slowing down.
Power generation - September 2017 - Canada
- This document provides a summary of power generation in Canada from September 2017. It includes information on power generation by source in Canada and blogs about BC Hydro and Ontario Power Generation. It also references the UN's Agenda 2030 sustainable development goals. The author is Paul Young, a CPA and subject matter expert in various fields, who provides his contact information.
Agriculture sector – Canada and United States – October 2017
The document is a report by Paul Young, CPA, CGA on the agriculture sectors in Canada and the United States in October 2017. It includes Paul Young's background and contact information. The agenda outlines that it will discuss the relationship between agricultural equipment sales and commodity prices, commodity price indexes, and statistics on food processing sales, exports and job creation from sources including the Association of Equipment Manufacturers and Scotia Bank.
British columbia [ Analysis - July 2017
Here is a quick look at British Columbia. British Columbia is faced with a few issues including wild fires and change in government.
Similar to Metal fabrication - Canada and United states - November 2017 (20)
Automotive Sector| May 2020| Analysis and Commentary
Automotive Sector| May 2020| Analysis and Commentary
Key Macro/Micro Indicators - Canada and USA - July 2020 and August 2020
Key Macro/Micro Indicators - Canada and USA - July 2020 and August 2020
Key industry and Economic Indicators - Canada and USA - June 2017 and May 2017
Key industry and Economic Indicators - Canada and USA - June 2017 and May 2017
Agriculture and Mining sector - Canada and USA - August 2017
Agriculture and Mining sector - Canada and USA - August 2017
Metal fabrication - Canada and United States - June 2017 and July 2017
Metal fabrication - Canada and United States - June 2017 and July 2017
Manufacturing| Analysis and Commentary| August 2020
Manufacturing| Analysis and Commentary| August 2020
Key Metrics and Trends - Canada and United States - April 2017 and May 2017
Key Metrics and Trends - Canada and United States - April 2017 and May 2017
Metal fabrication sector – Canada and United States - October 2017
Metal fabrication sector – Canada and United States - October 2017
Key Macro and Micro Indicators| Canada and USA| May 2020 and June 2020
Key Macro and Micro Indicators| Canada and USA| May 2020 and June 2020
Provincial Forecast and Scorecard - Canada - October 2017
Provincial Forecast and Scorecard - Canada - October 2017
Agriculture sector – Canada and United States – October 2017
Agriculture sector – Canada and United States – October 2017
More from paul young cpa, cga
Retail Sales and Consumer Spending Analysis and Commentary - July 2023.pptx
Canadian retail sales dropped 0.3% in August, the first decline since March, as higher interest rates start to impact household budgets. Seven of the nine retail subsectors saw sales increases in July, led by food and beverage retailers, while motor vehicle and parts dealers saw the largest decrease. Excluding autos, retail sales in July rose 1%, double expectations. The report suggests Canadians are tightening spending as more face higher mortgage payments and gas prices due to Bank of Canada rate hikes aimed at slowing inflation.
Addressing issues with the Public Sector Governance Model.pptx
The key challenges facing Australian business leaders in 2023 include:
1. Talent acquisition, retention and training staff for digital transformation.
2. Implementing successful digital transformation while managing cyber risks.
3. Adapting to changing regulations and reporting requirements.
Health risks from COVID-19, social reputation concerns, and disruptive emerging technologies are also significant social challenges impacting Australian businesses. Over the next 3-5 years, talent management for digitization, cybersecurity, digital transformation, regulatory changes, and identifying new growth opportunities will be the top challenges according to business leaders.
Global Housing Market Analysis and Commentary- September 2023.pptx
Summary:
Homebuilders are walking a fine line when it comes to new projects as high mortgage rates curb demand.
New residential construction, including single-family homes and multifamily, dropped 11.3% month over month in August to 1.283 million units on a seasonally adjusted basis, according to Census Bureau data released Tuesday. That's down 14.8% compared with a year ago and well below the 1.44 million units economists surveyed by Bloomberg projected.
But authorized residential permits — an indicator of potential future activity — rose 6.9% to 1.543 million permits in August from July. That was still down 2.7% from last August. Single-family permits, though, were up 2% from July to 949,000. Multifamily permits came in at 535,000.
The data reflects two opposing forces builders are trying to balance: the ongoing need for new construction to fill in limited inventory and elevated mortgage rates that are hurting their biggest customer right now, the first-time homebuyer.
"High mortgage rates are clearly taking a toll on builder confidence and consumer demand, as a growing number of buyers are electing to defer a home purchase until long-term rates move lower," Robert Dietz, chief economist of the National Association of Home Builders, said Monday in a press release after builder confidence dropped for the second straight month.
Source: https://ca.finance.yahoo.com/news/homebuilders-face-a-tough-balancing-act-on-new-construction-amid-high-mortgage-rates-130744368.html
What is next for the Mining Sector.pptx
Blog – What is next for the Mining Sector – September 2023
The mining sector provides critical material that support solar, wind, and lithium-ion batteries as part of the green transition. https://www.iea.org/news/critical-minerals-market-sees-unprecedented-growth-as-clean-energy-demand-drives-strong-increase-in-investment
The mining sector products play a key role with the global GDP - https://www.yicaiglobal.com/news/global-mining-industry-value-was-69-of-world-gdp-last-year-china-says
Mining practices need to be sustainable including following all ESG policies - https://www.linkedin.com/advice/1/how-can-you-monitor-sustainable-mining-practices
Other links and sources –
Lithium Supply and Price - https://zbr.com.mx/en/sin-categoria-es/lithium-prices-fall-44-in-china-due-to-lack-of-demand/138168/
Cobalt - https://www.linkedin.com/posts/mahmut-karada%C5%9F-a2b7a5151_china-exportrestrictions-gallium-activity-7082603182589157376-Zrty/?trk=public_profile_like_view
Nickel https://www.eureporter.co/business/2023/09/15/stanislav-kondrashov-from-telf-ag-nickel-prices-outlook-remains-positive/
Iron-ore - https://www.brecorder.com/news/40263584/sgx-iron-ore-set-for-best-week-in-3-months
TD Bank / Metals - https://www.tdsecurities.com/ca/en/setting-the-stage-for-gold-outlook
Biodiversity / Mining - https://worldcrunch.com/green/lithium-green-energy-argentina-indigenous
ESG - https://iriscarbon.com/the-added-value-of-integrated-esg-reporting-a-threefold-framework/
Manufacturing Sector – United States – August 2023.pptx
Blog – Manufacturing Shipments and Orders – The United States – August 2023
Summary:
New orders for manufacturing technology in the United States totaled $353.9 million in July 2023, as per the latest report by AMT – The Association For Manufacturing Technology. This figure marked a 12.4% decline from June 2023 but remained only 10.5% lower than July 2022. Year-to-date orders amounted to $2.83 billion, reflecting a 12.7% decrease compared to the same period the previous year.
Douglas K. Woods, President of AMT, noted that July is typically a slower month for manufacturing technology orders, so a slight drop was expected. However, he pointed out a notable trend: over the last two months, the year-to-date order gap has narrowed during historically slow periods. While job shops have seen decreased orders, other industries that benefited from reshoring or government investments have helped fill the gap.
Among specific sectors, job shops, the largest customer segment, placed their lowest total monthly orders since August 2020. In contrast, metal valve manufacturers recorded their third-highest monthly order value on record, last seen in September 2018, making up nearly 5% of the total manufacturing technology order value for July 2023. Manufacturers of motor vehicle transmissions continued to order machinery at an elevated pace. However, the aerospace industry continued to order below its early 2022 peaks, with hopes that recent projects like the federal government's $1.5 billion investment in communications satellites might reverse this trend.
Source: https://www.sme.org/technologies/articles/2023/september/u.s.-manufacturing-technology-orders-dip-in-july-but-show-resilience-amid-economic-uncertainty
Stock Market Analysis and Commentary for WE September 15 2023.pptx
Blog – Analysis and Commentary – Stock Market – WE September 15 2023
Summary:
Stocks fell Friday as investors wrap up a volatile week ahead of the Federal Reserve's policy meeting.
The Dow Jones Industrials tumbled 288.87 points to close out Friday and the week at 34,618.24. At its lows, it completely wiped out Thursday's 332-point rally.
The S&P 500 index sank 54.78 points, or 1.2%, to 4,450.32.
The NASDAQ index plunged 217.72 points, or 1.6%, to 13,708.33.
The Dow held onto a winning week. The S&P 500 and NASDAQ both closed out the week with losses.
Information technology was the worst-performing sector in the S&P 500, down nearly 2%. Adobe shares fell more than 4% even after the software firm posted better-than-expected quarterly results. Shares of Arm Holdings were lower one day after its successful public debut.
Auto stocks General Motors and Stellantis N.V. were higher Friday, while Ford Motor was about flat. Thousands of members of the United Auto Workers went on strike after failing to reach a deal with the automakers Thursday night.
Elsewhere, Lennar shares slid 3%. The home construction firm posted third-quarter results that beat on the top and bottom lines.
On the economic front, the University of Michigan's consumer sentiment survey showed one-year inflation expectations dropped to 3.1% in
September, tied for the lowest since January 2021. Also, the five-year outlook fell to 2.7%, matching its lowest since December 2020.
Manufacturing Sector – Canada – September 2023.pptx
- Canadian manufacturing sales increased 1.6% in July, led by higher sales in food products, petroleum and coal products, and transportation equipment. Paper and plastics sales decreased the most.
- Inventory levels increased slightly while unfilled orders decreased, pointing to a potential slowdown.
- The manufacturing sector in Canada will continue to face challenges such as global economic uncertainty, rising costs, supply chain issues, climate change risks, and skills shortages.
Electricity Analysis - Canada and the OECD - June 2023.pptx
Summary:
Over three-quarters of the world’s total coal-generated electricity is consumed in just three countries. China is the top user of coal, making up 53.3% of global coal demand, followed by India at 13.6%, and the U.S. at 8.9%.
Burning coal—for electricity, as well as metallurgy and cement production—is the world’s single largest source of CO2 emissions. Nevertheless, its use in electricity generation has actually grown 91.2% since 1997, the year when the first global climate agreement was signed in Kyoto, Japan.
However, even as non-renewables enjoy their time in the sun, their days could be numbered.
In 2022, renewables, such as wind, solar, and geothermal, represented 14.4% of total electricity generation with an extraordinary annual growth rate of 14.7%, driven by big gains in solar and wind. Non-renewables, by contrast, only managed an anemic 0.4%.
The authors of the Statistical Review do not include hydroelectric in their renewable calculations, even though many others, including the International Energy Agency, consider it a “well-established renewable power technology.”
With hydroelectric moved into the renewable column, together they accounted for over 29.3% of all electricity generated in 2022, with an annual growth rate of 7.4%.
Source - https://energynow.ca/2023/09/infographic-what-electricity-sources-power-the-world-see-them-here-visual-capitalist/
Logistics Warehousing Transportation and Distrbution Analysis and Commentary ...
The document provides an overview of key metrics and trends in the logistics, warehousing, distribution, and transportation sector. It includes data on consumer price index, diesel fuel costs, freight indexes, e-commerce sales, retail sales, class 8 truck sales, EPA emissions standards, trailer sales, and tonnage. It also discusses supply chain management solutions like planning analytics, blockchain, and AI assistants. Finally, it touches on topics like infrastructure spending, automation, and ESG reporting.
Retail Sales and Consumer Spending Analysis and Commentary - United States - ...
United States retail sales rose 0.6% in August despite flat sales at internet retailers after Amazon Prime Day. Most of the increase was due to higher gasoline prices. While consumer spending has been strong, higher interest rates and a slowdown in hiring are expected to restrain purchases in the coming months. Forecasters predict the 2023 holiday shopping season could be the weakest in five years due to economic challenges facing consumers. The retail sector continues facing inventory management challenges and social governance issues.
How to improve the Governance Model for the Public Sector - United States - S...
This document provides a summary of strategies to improve governance in government. It discusses factors that impact governance like transparency and accountability. It recommends using performance audits to assess key performance indicators and ensure recommendations are implemented. Other strategies include improving data ethics and literacy, mitigating geopolitical risks, adopting ESG reporting, and using technology like audit analytics and AI to enhance governance. The overall goal is for government to deliver programs and tax policies with value for money and transparency.
What is next for Agriculture Sector - August 2023.pptx
This document provides an analysis of the agriculture output and equipment sector for August 2023. It includes discussions of commodity prices, crop estimates, energy prices, food prices, farming incomes, top farming states, food processors, and the role of technology and government in farming. Key points covered include rising input costs challenging farmers, preliminary crop estimates for Canada, volatility in oil and diesel prices impacting farm expenses, and opportunities for data and automation to help address issues in the agriculture industry.
Biotech Pharmaceutical Medical Equipment and Supplies - Analysis - September ...
This document provides an overview and agenda for a presentation on the biotech, pharmaceutical, and healthcare sector. It includes:
- An introduction and biography of presenter Paul Young CPA CGA
- An agenda covering topics like vaccine production, drug discovery, innovation in areas like storage and AI, and the life sciences strategy
- Links and summaries of information on these topics, including the top vaccine manufacturers, regulations in Canada, and growth in the pharmaceutical market
The presentation aims to discuss key areas of the biotech/pharmaceutical sector including vaccine development and production, drug discovery, innovation, and strategies for the life sciences industry. Links and outside sources are provided to support the topics in the agenda.
Better Public Safety Management using Analytics - September 2023.pptx
This document discusses using analytics to improve public safety management. It outlines rising public safety costs for governments and key issues facing policing like complex crimes and accountability. The document presents crime rate data for Canada and discusses building machine learning models in SPSS and dashboards in Cognos Analytics to analyze police data and forecast expenses. Finally, it lists potential next steps for crime in Canada like bail and corrections reforms, gun control, and increased police oversight.
Stock Market Analysis and Commentary for WE September 9 2023.pptx
What did the markets tell us this week?
1. Housing supply and costs continue to plague countries around the world.
2. Gasoline prices are on the rise that puts pressure on central banks ability to hit their core inflation targets.
3. ESG adoption by both the private and public sector is leading to both funding concerns and the overall cost of implementing ESG policies.
4. Adopting technology as part of increasing food production is facing both capital and operational funding concerns.
5. Strike at LNG facility in Australia is leading to concerns around a supply chain disruption of natural gas for EMEA and Asia.
6. The threat of China dumping batteries into markets - https://www.ft.com/content/b6038e51-7b5b-4f97-a5da-9202e71562fc
7. Adoption of generative AI has been facing many challenges related to security, privacy, and ethical issues.
8. Lack of biodiversity planning as part of the overall climate mitigation including sustainable mining, forestry, oil, gas, agriculture, and housing
9. Geopolitical issues continue to impact supply chain.
10. The concerns of recession continue to plague both the private and public sector.
11. Productivity issues continue to plague governments around the world.
Workforce Planning and Employment Analysis - August 2023.pptx
The document discusses workforce planning and employment analysis. It provides an overview of employment statistics in the United States, Canada, and Australia. It then discusses Sysco's workforce planning model and the role of the CFO in workforce planning. Finally, it defines autonomous finance as the automation of financial operations through software and algorithms, and provides some key statistics on its adoption.
Global Automotive - Analysis and Commentary - August 2023.pptx
This presentation provides an overview of key trends in the global automotive sector in August 2023. It discusses 1) sales trends in Canada, the US and globally, 2) the growth of electric vehicles and focus on reducing emissions, and 3) ongoing transformation in the industry through automation, connectivity and new technologies. Sources included discuss topics like electric vehicle production and adoption, public safety issues regarding EV fires, gasoline and car prices, supply chain challenges, and green transitions in transportation.
Global (Mining Oil and Gas Forestry and Agriculture) Analysis and Commentary ...
The mining, oil, gas, agriculture, forestry, and mining continue to face environmental, social, and governance policy review including reporting of key metrics as part of ESG reporting cycle.
There is more focus on profitability and investment returns as part of the integrated planning and reporting cycle.
World Merchandise Trade – September 2023.pptx
Summary:
The global economy faces what at least one forecaster is calling a mild trade recession as shipments from China slump and German factories downshift.
China’s export declines extended into August, though there were signs that the worst of a world trade slowdown may be over for the leading exporter.
Overseas shipments from China fell 8.8% in dollar terms from a year earlier while imports contracted 7.3%, both better than economists’ estimates and significantly less severe than July’s downturn.
Other data have suggested trade may be stabilizing after weakening for most of this year. Exports from South Korea also declined at a more moderate pace in August than the previous month.
Source: https://www.bloomberg.com/news/newsletters/2023-09-07/supply-chain-latest-world-trade-faces-a-shallow-recession?srnd=economics-v2
Additional sources and links:
Lithium - https://source.benchmarkminerals.com/article/falling-lithium-prices-challenge-potential-cost-advantages-of-sodium-batteries
Oil Production - https://www.cnn.com/2023/09/06/business/oil-price-goldman-sachs/index.html
Natural gas - https://www.fxstreet.com/news/natural-gas-holds-up-as-markets-in-limbo-over-strikes-202309070956
Lumber - https://www.fastmarkets.com/insights/sawmill-capacity-closures-reshape-us-lumber-supply
Critical metals - https://www.wasterecyclingmag.ca/feature/how-recycling-could-solve-the-shortage-of-minerals-essential-to-clean-energy/
Agriculture - https://www.morningagclips.com/economists-forecast-positive-end-of-year-crop-outlook-despite-warmer-midwestern-climate/
ESG - https://www.skadden.com/insights/publications/2023/09/the-informed-board/the-eus-new-esg-disclosure-rules
Ports - https://www.marketscreener.com/quote/stock/HAPAG-LLOYD-AG-24857717/news/Hapag-Lloyd-chief-warns-of-rougher-seas-ahead-for-container-shipping-44789017/
Top destination for reshoring - https://www.thenationalnews.com/business/economy/2023/08/29/uae-in-top-10-most-powerful-passports-for-investment-opportunity/
Global Trade - https://phys.org/news/2023-09-opinion-broke-global-climate-finish.html
What is next for the Forestry Sector and Lumber Production - September 2023.pptx
Lumber production in Canada continues to face many hurdles
Canada forest management practices are some of the bests in the world
Canada planted over 440M in seedlings back in 2018. It is now 2022 which means close 2M seedlings have been planted.
All levels need to put more focus on urban and rural planning solutions
More work including spending on wildfire and forest fire mitigation
Canada and USA need to find a path forward to resolve the softwood lumber dispute
There needs to a better balanced between climate change policies and growing the economy in a sustainable way
3D printing for housing needs to become mainstream
More protection needs to happen with key ecosystems like wetlands, forest, and peatlands.
There is a risk of debt default if interest rates are hike over the next few months
More from paul young cpa, cga (20)
Retail Sales and Consumer Spending Analysis and Commentary - July 2023.pptx
Retail Sales and Consumer Spending Analysis and Commentary - July 2023.pptx
Addressing issues with the Public Sector Governance Model.pptx
Addressing issues with the Public Sector Governance Model.pptx
Global Housing Market Analysis and Commentary- September 2023.pptx
Global Housing Market Analysis and Commentary- September 2023.pptx
Manufacturing Sector – United States – August 2023.pptx
Manufacturing Sector – United States – August 2023.pptx
Stock Market Analysis and Commentary for WE September 15 2023.pptx
Stock Market Analysis and Commentary for WE September 15 2023.pptx
Manufacturing Sector – Canada – September 2023.pptx
Manufacturing Sector – Canada – September 2023.pptx
Electricity Analysis - Canada and the OECD - June 2023.pptx
Electricity Analysis - Canada and the OECD - June 2023.pptx
Logistics Warehousing Transportation and Distrbution Analysis and Commentary ...
Logistics Warehousing Transportation and Distrbution Analysis and Commentary ...
Retail Sales and Consumer Spending Analysis and Commentary - United States - ...
Retail Sales and Consumer Spending Analysis and Commentary - United States - ...
How to improve the Governance Model for the Public Sector - United States - S...
How to improve the Governance Model for the Public Sector - United States - S...
What is next for Agriculture Sector - August 2023.pptx
What is next for Agriculture Sector - August 2023.pptx
Biotech Pharmaceutical Medical Equipment and Supplies - Analysis - September ...
Biotech Pharmaceutical Medical Equipment and Supplies - Analysis - September ...
Better Public Safety Management using Analytics - September 2023.pptx
Better Public Safety Management using Analytics - September 2023.pptx
Stock Market Analysis and Commentary for WE September 9 2023.pptx
Stock Market Analysis and Commentary for WE September 9 2023.pptx
Workforce Planning and Employment Analysis - August 2023.pptx
Workforce Planning and Employment Analysis - August 2023.pptx
Global Automotive - Analysis and Commentary - August 2023.pptx
Global Automotive - Analysis and Commentary - August 2023.pptx
Global (Mining Oil and Gas Forestry and Agriculture) Analysis and Commentary ...
Global (Mining Oil and Gas Forestry and Agriculture) Analysis and Commentary ...
What is next for the Forestry Sector and Lumber Production - September 2023.pptx
What is next for the Forestry Sector and Lumber Production - September 2023.pptx
Recently uploaded
1. Elemental Economics - Introduction to mining.pdf
After this first you should: Understand the nature of mining; have an awareness of the industry’s boundaries, corporate structure and size; appreciation the complex motivations and objectives of the industries’ various participants; know how mineral reserves are defined and estimated, and how they evolve over time.
^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Duba...
Whatsapp (+971581248768) Buy Abortion Pills In Dubai/ Qatar/Kuwait/Doha/Abu Dhabi/Alain/RAK City/Satwa/Al Ain/Abortion Pills For Sale In Qatar, Doha. Abu az Zuluf. Abu Thaylah. Ad Dawhah al Jadidah. Al Arish, Al Bida ash Sharqiyah, Al Ghanim, Al Ghuwariyah, Qatari, Abu Dhabi, Dubai.. WHATSAPP +971)581248768 Abortion Pills / Cytotec Tablets Available in Dubai, Sharjah, Abudhabi, Ajman, Alain, Fujeira, Ras Al Khaima, Umm Al Quwain., UAE, buy cytotec in Dubai– Where I can buy abortion pills in Dubai,+971582071918where I can buy abortion pills in Abudhabi +971)581248768 , where I can buy abortion pills in Sharjah,+97158207191 8where I can buy abortion pills in Ajman, +971)581248768 where I can buy abortion pills in Umm al Quwain +971)581248768 , where I can buy abortion pills in Fujairah +971)581248768 , where I can buy abortion pills in Ras al Khaimah +971)581248768 , where I can buy abortion pills in Alain+971)581248768 , where I can buy abortion pills in UAE +971)581248768 we are providing cytotec 200mg abortion pill in dubai, uae.Medication abortion offers an alternative to Surgical Abortion for women in the early weeks of pregnancy. Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman Fujairah Ras Al Khaimah%^^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Dubai Abu Dhabi Sharjah Deira Ajman
South Dakota State University degree offer diploma Transcript
办理美国SDSU毕业证书制作南达科他州立大学假文凭定制Q微168899991做SDSU留信网教留服认证海牙认证改SDSU成绩单GPA做SDSU假学位证假文凭高仿毕业证GRE代考如何申请南达科他州立大学South Dakota State University degree offer diploma Transcript
Bridging the gap: Online job postings, survey data and the assessment of job ...
Bridging the gap: Online job postings, survey data and the assessment of job ...Labour Market Information Council | Conseil de l’information sur le marché du travail
OJP data from firms like Vicinity Jobs have emerged as a complement to traditional sources of labour demand data, such as the Job Vacancy and Wages Survey (JVWS). Ibrahim Abuallail, PhD Candidate, University of Ottawa, presented research relating to bias in OJPs and a proposed approach to effectively adjust OJP data to complement existing official data (such as from the JVWS) and improve the measurement of labour demand.Using Online job postings and survey data to understand labour market trends
Using Online job postings and survey data to understand labour market trendsLabour Market Information Council | Conseil de l’information sur le marché du travail
[4:55 p.m.] Bryan Oates
OJPs are becoming a critical resource for policy-makers and researchers who study the labour market. LMIC continues to work with Vicinity Jobs’ data on OJPs, which can be explored in our Canadian Job Trends Dashboard. Valuable insights have been gained through our analysis of OJP data, including LMIC research lead
Suzanne Spiteri’s recent report on improving the quality and accessibility of job postings to reduce employment barriers for neurodivergent people.
Decoding job postings: Improving accessibility for neurodivergent job seekers
Improving the quality and accessibility of job postings is one way to reduce employment barriers for neurodivergent people.How Does CRISIL Evaluate Lenders in India for Credit Ratings
CRISIL evaluates lenders in India by analyzing financial performance, loan portfolio quality, risk management practices, capital adequacy, market position, and adherence to regulatory requirements. This comprehensive assessment ensures a thorough evaluation of creditworthiness and financial strength. Each criterion is meticulously examined to provide credible and reliable ratings.
STREETONOMICS: Exploring the Uncharted Territories of Informal Markets throug...
Delve into the world of STREETONOMICS, where a team of 7 enthusiasts embarks on a journey to understand unorganized markets. By engaging with a coffee street vendor and crafting questionnaires, this project uncovers valuable insights into consumer behavior and market dynamics in informal settings."
Economic Risk Factor Update: June 2024 [SlideShare]
May’s reports showed signs of continued economic growth, said Sam Millette, director, fixed income, in his latest Economic Risk Factor Update.
For more market updates, subscribe to The Independent Market Observer at https://blog.commonwealth.com/independent-market-observer.
Solution Manual For Financial Accounting, 8th Canadian Edition 2024, by Libby...
Solution Manual For Financial Accounting, 8th Canadian Edition 2024, by Libby, Hodge, Verified Chapters 1 - 13, Complete Newest Version Solution Manual For Financial Accounting, 8th Canadian Edition by Libby, Hodge, Verified Chapters 1 - 13, Complete Newest Version Solution Manual For Financial Accounting 8th Canadian Edition Pdf Chapters Download Stuvia Solution Manual For Financial Accounting 8th Canadian Edition Ebook Download Stuvia Solution Manual For Financial Accounting 8th Canadian Edition Pdf Solution Manual For Financial Accounting 8th Canadian Edition Pdf Download Stuvia Financial Accounting 8th Canadian Edition Pdf Chapters Download Stuvia Financial Accounting 8th Canadian Edition Ebook Download Stuvia Financial Accounting 8th Canadian Edition Pdf Financial Accounting 8th Canadian Edition Pdf Download Stuvia
Who Is the Largest Producer of Soybean in India Now.pdf
This blog explores the current largest producer of soybean in India and the factors contributing to their dominance.
Tdasx: Unveiling the Trillion-Dollar Potential of Bitcoin DeFi
Tdasx: Unveiling the Trillion-Dollar Potential of Bitcoin DeFi
快速办理(SMU毕业证书)南卫理公会大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(SMU毕业证书)南卫理公会大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Detailed power point presentation on compound interest and how it is calculated
Detailed information about compund interest
Earn a passive income with prosocial investing
Invest in prosocial funds that earn you an income while improving the world
The state of welfare Resolution Foundation Event
How has Britain’s safety net changed since 2010 and what comes next?
5 Tips for Creating Standard Financial Reports
Well-crafted financial reports serve as vital tools for decision-making and transparency within an organization. By following the undermentioned tips, you can create standardized financial reports that effectively communicate your company's financial health and performance to stakeholders.
falcon-invoice-discounting-a-premier-investment-platform-for-superior-returns...
falcon-invoice-discounting-a-premier-investment-platform-for-superior-returns...Falcon Invoice Discounting
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.International Sustainability Standards Board
Issb standards
New standard for reporting sustainability on lines of tcfd
Ending stagnation: How to boost prosperity across Scotland
A toxic combination of 15 years of low growth, and four decades of high inequality, has left Britain poorer and falling behind its peers. Productivity growth is weak and public investment is low, while wages today are no higher than they were before the financial crisis. Britain needs a new economic strategy to lift itself out of stagnation.
Scotland is in many ways a microcosm of this challenge. It has become a hub for creative industries, is home to several world-class universities and a thriving community of businesses – strengths that need to be harness and leveraged. But it also has high levels of deprivation, with homelessness reaching a record high and nearly half a million people living in very deep poverty last year. Scotland won’t be truly thriving unless it finds ways to ensure that all its inhabitants benefit from growth and investment. This is the central challenge facing policy makers both in Holyrood and Westminster.
What should a new national economic strategy for Scotland include? What would the pursuit of stronger economic growth mean for local, national and UK-wide policy makers? How will economic change affect the jobs we do, the places we live and the businesses we work for? And what are the prospects for cities like Glasgow, and nations like Scotland, in rising to these challenges?
Fabular Frames and the Four Ratio Problem
Digital, interactive art showing the struggle of a society in providing for its present population while also saving planetary resources for future generations. Spread across several frames, the art is actually the rendering of real and speculative data. The stereographic projections change shape in response to prompts and provocations. Visitors interact with the model through speculative statements about how to increase savings across communities, regions, ecosystems and environments. Their fabulations combined with random noise, i.e. factors beyond control, have a dramatic effect on the societal transition. Things get better. Things get worse. The aim is to give visitors a new grasp and feel of the ongoing struggles in democracies around the world.
Stunning art in the small multiples format brings out the spatiotemporal nature of societal transitions, against backdrop issues such as energy, housing, waste, farmland and forest. In each frame we see hopeful and frightful interplays between spending and saving. Problems emerge when one of the two parts of the existential anaglyph rapidly shrinks like Arctic ice, as factors cross thresholds. Ecological wealth and intergenerational equity areFour at stake. Not enough spending could mean economic stress, social unrest and political conflict. Not enough saving and there will be climate breakdown and ‘bankruptcy’. So where does speculative design start and the gambling and betting end? Behind each fabular frame is a four ratio problem. Each ratio reflects the level of sacrifice and self-restraint a society is willing to accept, against promises of prosperity and freedom. Some values seem to stabilise a frame while others cause collapse. Get the ratios right and we can have it all. Get them wrong and things get more desperate.
Recently uploaded (20)
1. Elemental Economics - Introduction to mining.pdf
1. Elemental Economics - Introduction to mining.pdf
^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Duba...
^%$Zone1:+971)581248768’][* Legit & Safe #Abortion #Pills #For #Sale In #Duba...
South Dakota State University degree offer diploma Transcript
South Dakota State University degree offer diploma Transcript
Bridging the gap: Online job postings, survey data and the assessment of job ...
Bridging the gap: Online job postings, survey data and the assessment of job ...
Using Online job postings and survey data to understand labour market trends
Using Online job postings and survey data to understand labour market trends
How Does CRISIL Evaluate Lenders in India for Credit Ratings
How Does CRISIL Evaluate Lenders in India for Credit Ratings
STREETONOMICS: Exploring the Uncharted Territories of Informal Markets throug...
STREETONOMICS: Exploring the Uncharted Territories of Informal Markets throug...
Economic Risk Factor Update: June 2024 [SlideShare]
Economic Risk Factor Update: June 2024 [SlideShare]
Solution Manual For Financial Accounting, 8th Canadian Edition 2024, by Libby...
Solution Manual For Financial Accounting, 8th Canadian Edition 2024, by Libby...
Who Is the Largest Producer of Soybean in India Now.pdf
Who Is the Largest Producer of Soybean in India Now.pdf
Tdasx: Unveiling the Trillion-Dollar Potential of Bitcoin DeFi
Tdasx: Unveiling the Trillion-Dollar Potential of Bitcoin DeFi
Detailed power point presentation on compound interest and how it is calculated
Detailed power point presentation on compound interest and how it is calculated
falcon-invoice-discounting-a-premier-investment-platform-for-superior-returns...
falcon-invoice-discounting-a-premier-investment-platform-for-superior-returns...
Ending stagnation: How to boost prosperity across Scotland
Ending stagnation: How to boost prosperity across Scotland
Metal fabrication - Canada and United states - November 2017
- 1. METAL FABRICATION – CANADA AND UNITED STATES – NOVEMBER 2017 BY: PAUL YOUNG, CPA, CGA DATE: DECEMBER 20, 2017
- 2. DISCLAIMER • This presentation looks at the metal fabrication market for Canada and United States
- 3. PAUL YOUNG - BIO • CPA, CGA • Academia (PF1, FA4, FN2, MU1 and MS2) • SME – Risk Management • SME – Close, Consolidate and Reporting • SME – Public Policy • SME – Emerging Technology • SME – Financial Solutions • SME – Business Process Change • SME – Supply Chain Management Contact information: Paul_Young_CGA@Hotmail.com
- 4. AGENDA • Commodity Index • Automotive • AG Equipment Monthly % Change • Class 8 Trucks Sales vs Freight Index • Steel Production Monthly % Change • Metal Processing Center Monthly % Change
- 5. COMMODITY INDEX Source - http://www.gbm.scotiabank.com/scpt/gbm/scotiaeconomics63/SCPI_2017-12-20.pdf
- 6. AUTOMOTIVE / NORTH AMERICA Source - http://www.gbm.scotiabank.com/scpt/gbm/scotiaeconomics63/GAR_2017-12-06.pdf
- 7. AGRICULTURE EQUIPMENT SALES % VS COMMODITY INDEX % CHANGE Source – BMO and Association of Equipment Manufacturers
- 8. CLASS 8 TRUCK SALES VS FREIGHT INDEX • The Trucker and https://www.bts.gov/newsroom/october-2017-freight-transportation-services-index-tsi-0
- 9. STEEL PRODUCTION Source - https://www.worldsteel.org/en/dam/jcr:20a37c1c-b50c-478e-bd28-b25402456aad/November+2017+Crude+Steel+Production+Table.pdf
- 10. STEEL PROCESSING CENTER Source - http://www.americanmachinist.com/news/setback-us-metals-center-shipments