Memcon Micchp 120-hand-press-1
•
0 likes•74 views
This document provides information on an integrated crimp connector hand press tool and the various die sets available for crimping 2 to 28 ways. The MICCHP-120 hand press is designed for fast, efficient crimping of MICC connectors to membranes and flexible circuits. It can crimp from 2 to 28 ways in a single operation and allows for easy changing of dies to change the number of crimped ways. Six dies are supplied initially with the ability to order additional dies as needed. The press provides repeatable, consistent crimps each time and weighs 18kg with dimensions of 40 by 33 by 57 cm.
Report
Share
Report
Share
Download to read offline
Recommended
Duct Repairs Kit - Polypipe Cable Ducting
This document provides information about various plastic parts for cable TV duct systems, including bends, repair kits, couplings, and swept tees of different sizes, materials, and angles. Dimensions listed are nominal. Items are made to order and subject to lead times. Repair kits are supplied in 0.5m lengths for easy repair of damaged ducts.
Duet
This document is a spare parts list for a Duet Card Cutter plotter technology. It contains over 50 individual part descriptions and quantities needed. The parts include components like the paper feed bar, control box, pen head travel limiter, carriage assembly, various circuit boards, solenoids, wheels, belts, switches and other mechanical and electrical parts. Spare and replacement parts are listed to repair or service the Duet Card Cutter plotter.
Planta de processamento do mineral ilmenite elaborado por ecton boa
This document provides a flowsheet for an ilmenite magnetic separation circuit. It lists various process equipment including conveyors, dryers, screens, magnets, heaters, and machines. It also provides flow directions and references between different pieces of equipment. The flowsheet aims to separate ilmenite into three product bins, with rejects sent to a collection conveyor. Equipment is identified by tags like CV5002 and DM5321-23. Flow rates and capacities are provided for some units.
Case cx290 crawler excavator parts catalogue manual
This document contains a parts catalogue for a CX290 Case crawler excavator. It lists part numbers, descriptions and quantities of parts for the engine mounting, air filtration, exhaust, radiator, cab air conditioning compressor mounting, drive belt guard and ventilator, and water pump systems. The parts are grouped by subsystem and referenced in multiple sections.
Alroc PG HTA Outer Sheath Stripping Pliers - Alroc Cable Stripping Tools for ...
Alroc PG HTA Outer Sheath Stripping Pliers - Alroc Cable Stripping Tools for ...Thorne & Derrick International
Alroc PG HTA Outer Sheath Stripping Pliers - Alroc Cable Stripping Tools for Sheath Removal from LV HV Cables 11kV-33kVAlroc PG BT Sheath Stipping Pliers - LV Twisted Arial - Outer Sheath Removal ...
Alroc PG BT Sheath Stipping Pliers - LV Twisted Arial - Outer Sheath Removal ...Thorne & Derrick International
The document provides contact information for ALROC, a French foundry company, and describes their PG BT Twisted aerial pliers. The pliers allow for longitudinal and circular cutting to remove cable outer sheaths. They offer sheath removal and are speedy and light. The pliers come in three models to accommodate different sheath diameters and weights range from 430g to 600g.Alroc CW18-60 Bonded Semi-Con Stripping & Removal Tool (11kV-33kV)
The document describes a CWB/18-60-FEP tool that allows for the swift removal of bonded semi-conductors while creating a chamfer. It can remove semi-conductors from 18 to 60mm in diameter without lubrication. The depth of cutting can be set from 0.4 to 1.8mm in 0.1mm increments, and it creates a 13 degree chamfer.
IEC Switchgear_Vt's configuration ed04
The document provides information on primary and secondary connections for voltage transformers (VTs) assembled on various Siemens nxair family switchgears. It lists the VT models, circuit breaker versions, and connection types used for different voltage ratings of the nxair M and P models. Diagrams illustrate examples of screw, integrated fuse, and encapsulated wire connections. The document is intended to clarify the VT configuration and notes that any mismatches should be reported to the specified contact.
Recommended
Duct Repairs Kit - Polypipe Cable Ducting
This document provides information about various plastic parts for cable TV duct systems, including bends, repair kits, couplings, and swept tees of different sizes, materials, and angles. Dimensions listed are nominal. Items are made to order and subject to lead times. Repair kits are supplied in 0.5m lengths for easy repair of damaged ducts.
Duet
This document is a spare parts list for a Duet Card Cutter plotter technology. It contains over 50 individual part descriptions and quantities needed. The parts include components like the paper feed bar, control box, pen head travel limiter, carriage assembly, various circuit boards, solenoids, wheels, belts, switches and other mechanical and electrical parts. Spare and replacement parts are listed to repair or service the Duet Card Cutter plotter.
Planta de processamento do mineral ilmenite elaborado por ecton boa
This document provides a flowsheet for an ilmenite magnetic separation circuit. It lists various process equipment including conveyors, dryers, screens, magnets, heaters, and machines. It also provides flow directions and references between different pieces of equipment. The flowsheet aims to separate ilmenite into three product bins, with rejects sent to a collection conveyor. Equipment is identified by tags like CV5002 and DM5321-23. Flow rates and capacities are provided for some units.
Case cx290 crawler excavator parts catalogue manual
This document contains a parts catalogue for a CX290 Case crawler excavator. It lists part numbers, descriptions and quantities of parts for the engine mounting, air filtration, exhaust, radiator, cab air conditioning compressor mounting, drive belt guard and ventilator, and water pump systems. The parts are grouped by subsystem and referenced in multiple sections.
Alroc PG HTA Outer Sheath Stripping Pliers - Alroc Cable Stripping Tools for ...
Alroc PG HTA Outer Sheath Stripping Pliers - Alroc Cable Stripping Tools for ...Thorne & Derrick International
Alroc PG HTA Outer Sheath Stripping Pliers - Alroc Cable Stripping Tools for Sheath Removal from LV HV Cables 11kV-33kVAlroc PG BT Sheath Stipping Pliers - LV Twisted Arial - Outer Sheath Removal ...
Alroc PG BT Sheath Stipping Pliers - LV Twisted Arial - Outer Sheath Removal ...Thorne & Derrick International
The document provides contact information for ALROC, a French foundry company, and describes their PG BT Twisted aerial pliers. The pliers allow for longitudinal and circular cutting to remove cable outer sheaths. They offer sheath removal and are speedy and light. The pliers come in three models to accommodate different sheath diameters and weights range from 430g to 600g.Alroc CW18-60 Bonded Semi-Con Stripping & Removal Tool (11kV-33kV)
The document describes a CWB/18-60-FEP tool that allows for the swift removal of bonded semi-conductors while creating a chamfer. It can remove semi-conductors from 18 to 60mm in diameter without lubrication. The depth of cutting can be set from 0.4 to 1.8mm in 0.1mm increments, and it creates a 13 degree chamfer.
IEC Switchgear_Vt's configuration ed04
The document provides information on primary and secondary connections for voltage transformers (VTs) assembled on various Siemens nxair family switchgears. It lists the VT models, circuit breaker versions, and connection types used for different voltage ratings of the nxair M and P models. Diagrams illustrate examples of screw, integrated fuse, and encapsulated wire connections. The document is intended to clarify the VT configuration and notes that any mismatches should be reported to the specified contact.
idclamping_en-webseite.pdf
Fixture elements
I.D. CLAMPING
from SMW-AUTOBLOK
HIGH PRECISION
Standard and special solutions.
Application/customer benefi ts
• For turning, milling, grinding and gear cutting operations
• High accuracy and torque transmission
• Clamping of very short workpieces on the front section of the sleeve possible
• FP: With axial pull down for best face run out.
Technical features
• Large expansibility 0.6 - 1.2 mm depending on size
• Power operated / manual lubrication
• Flange mounting
• Very rigid design
• Vulcanized expanding sleeve for protection from the penetration of chips (option)
• Preparation for air sensing
Standard equipment
Basic mandrel with draw bolt for power operation
Mounting bolts
Masafi Powertech Private Limited, Chennai, Electrical Supplies
We are manufactures of Cable Cleat, Cable Lugs and Link Boxes, we have wide range and varieties of these items in the brand name of MAICO. All our products are designed by experienced engineers and tested at renowned organization CPRI. All these products are manufactured in our own manufacturing unit located at Chennai using our own dies and patterns. Our manufacturing, testing, packing, despatch and delivery process adhere to international quality standards.
hydratight-machining-catalog
The company started with one product and a dream to become a world leader in field machining equipment. It now offers a full line of patented clamshells, boring bars, and other portable machining solutions. As the product line grew, so did the company's reputation as a world leader providing the highest quality equipment and support. The document provides an overview of the company and invites the reader to learn more about their products and services.
Brochure 958a Compact Housing Brochure
The 958A embedded linear displacement transducer provides accurate position feedback for automation applications. It features a rugged, compact design that can be installed inside hydraulic cylinders, protecting it from harsh conditions. The transducer uses proven magnetostrictive technology to measure position within 0.04% accuracy over programmable measurement ranges from 2 to 100 inches or millimeters. It is designed to withstand extreme vibration, shock, pressures, and temperatures from -40 to 105°C. The 958A provides various analog output options and connectors to interface with automation equipment.
Bolting tools
Powermaster manufacturer of bolting tools and bolting products, Hydraulic Torque Wrenches, Hydraulic Bolt Tensioners, Pneumatic Torque Wrenches, Backup Wrenches, Mechanical Torque Wrenches and others.
Electrical Crimping
As a technique, crimping can produce long-lasting joints, efficiently and easily with very little training. Nowadays, Crimping has taken the place of soldering in many electrical applications and now is the most extensively used way for connections. When crimped properly, the strands remain individual even upon entering the insulation crimp, making the chances of strands breaking low,which ensure mechanically stability and corrosion-resistance. The proper crimping requires the contact, corresponding wire, and the most essential part--a suitable crimping tool.
IWISS with its sub-brand iCrimp offers crimping tools for virtually all types of electrical connections in the market, non-insulated, insulated, battery lug,open barrel, closed barrel, etc.
1.Made of high-quality steel, durable enough for long term service.
2.Accurate jaw design guarantees perfect crimping every time
3.Upgraded structure brings an effortless and stable operation
In the past decades, our team committed to R&D and released various new style crimping tools to make the crimping more efficiently and easily. To meet requirements in different countries, we also made the tools in both metric and imperial standards.
IWISS tools are designed to create more efficient power to make perfect crimping. We keep working to fulfill our commitment to providing every customer with high-quality tools for electrical applications.
Cylinder-and-synchronous-lifting-system.pdf
TorcStark® is a professional manufacturer and supplier of hydraulic equipment. Mainly produce hydraulic torque wrenches, hydraulic bolt tensioners, hydraulic torque/tensioner pumps and other products.
Cylinder and synchronous lifting system
This document provides information about Pingyuan Jingke Hydraulic Co., Ltd, a manufacturer of hydraulic bolting tools and solutions. It summarizes several hydraulic bolting systems they produce including synchronous lifting systems, variable frequency control systems, three dimensional lifting systems, and walking type lifting systems. It also provides technical specifications and parameters for hydraulic cylinders and components.
Manual conversor dc siemens
The document provides an overview of the SIMOREG 6RA70 DC MASTER product line. It describes the power section and cooling features, as well as the parameterization devices, software structure, closed-loop control functions, monitoring and diagnosis functions, and interfaces. The converters are fully digital, compact units that supply armature and field circuits of variable-speed DC drives. They have rated DC currents from 15A to 3000A. The overview discusses the design, control features, options, planning guide, retrofitting capabilities, and protection devices. It provides guidance on selecting the appropriate converter and includes dimensional drawings and documentation.
Manufacturing slick090517
Craig Technologies Aerospace Solutions (CTAS) supports your projects from concept to real-world
application or at any scalable solution in-between. CTAS takes pride in responding to the everchanging
needs of our customers by placing an emphasis on evaluating our manufacturing
processes and making continual improvements. Our small business flexibility, lean management
team and industry-leading employee benefits help us deliver exceptional customer-driven solutions
and a quick and cost-effective solution to any priority need.
Dyadics scn5 datasheet
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- Models range from $295 to $695 and provide thrusts from 10-50kg with strokes from 50-300mm.
- Features include integrated motor, encoder and drive for precision; optimized screw and nut mechanism for accuracy and longevity.
- Models include basic, standard, dust-proof, and slider types for different environments and applications.
CUTTING TABLES MCV: stations and cutters
This document provides information about cutting tables and accessories from MCV. It includes specifications for different models of cutting tables that vary in length from 2000mm to 6000mm and width from 600mm to 1000mm. It also describes various optional cutting and forming stations that can be added, such as vertical and round cutting stations, dough folding, marking, and collecting stations. The document provides detailed specifications for cutting rollers used in the vertical cutting station, including dimensions, materials, and example products they can be used to manufacture.
Belimo lm
The document provides information on the LM Series direct coupled actuators from Belimo, including the LM24-3 US and LM24-SR-2.0 US models. It describes the actuators as being small yet powerful, with a minimum 35 in-lb torque allowing control of damper areas up to 8 square feet. The LM24-3 US is for on-off/floating point control using 24V power, while the LM24-SR-2.0 US provides proportional control via a 2-10VDC or 4-20mA input signal and includes electronic angle limiting from 20-100% rotation. Installation and operation instructions are included along with specifications, dimensions, accessories and agency listings for the actu
Applied motion products si5580 datasheet
This document provides information on the Si5580 Programmable Step Motor Drive from Applied Motion Products, including its features, specifications, and recommended NEMA 23 and 34 stepper motors to use with the drive. The Si5580 allows software control of motor current, resolution, idle current reduction, and has 8 programmable inputs and 3 outputs. It can drive 4, 6, or 8 lead stepper motors and includes programming software.
Karadautocomponentscompanypfofile
arad Auto Components has two Sister Concerns Also, 1) Excellence Castings Pvt. Ltd. . 2) Abhishek Enterprises. Karad Auto Components was incepted in 1999 with a vision of manufacturing high quality Machined Components and Shock Ab-sobers and Suspention
Semiconductor equipment parts in stock-SSe-0141
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
10304634
This document provides an overview and technical specifications for Siemens tiastar Motor Control Centers (MCCs). It describes the key features and benefits of standard tiastar MCCs, arc resistant tiastar MCCs, and smart tiastar MCCs. It also includes sections on codes and standards, estimated weights, wiring classes and types, heat dissipation, altitude ratings, structure and bussing options, units, and other technical details.
Empowering Grid Stability: Schneider Micom P127's Advanced Overcurrent Solutions
Empowering Grid Stability: Schneider Micom P127's Advanced Overcurrent SolutionsDigital and Smart Grid Enterprises
Schneider Micom P127 relay is part of MiCOM P12x, a range of directional and non-directional overcurrent relays from single-phase or earth fault up to the multifunctional three-phase P127 numerical relay with voltage protection functions.
Open manipulator x-assembly_guide_ver1913
ROS対応ロボットアームキット OpenMANIPULATOR-X RM-X52-TNMのハードウェア組立マニュアルです。
商品ページ
https://e-shop.robotis.co.jp/product.php?id=265
チュートリアル
https://emanual.robotis.com/docs/en/platform/openmanipulator_x/overview/
CNC machine
This presentation summarizes the key characteristics of CNC machines. It describes how CNC machines are automated machine tools controlled by programmed commands stored on a computer. The history of CNC is outlined from its origins in the 1950s to become widely used today. The main types of CNC machines are identified as turning centers, milling centers, vertical machining centers, horizontal machining centers, drilling machines, EDM machines, and laser cutting machines. Programming codes like G-codes and M-codes are discussed as well as how CNC machines work through precise positioning coordinates.
Memcon 0603 ultra thin smd leds ml197 series
This document provides specifications for 0603 chip size surface mount LEDs that are ideal for applications requiring an ultra-thin device, such as membrane switches, flexible circuits, and LCD backlighting. The LEDs come in various colors on 8mm tape and reel compatible with automated placement equipment, with 3,000 pieces per reel. They are moisture resistant and RoHS and Pb-free compliant.
Memcon Tactile Metal Domes Range
This document provides information about metal domes for membrane switches and flexible circuits available from MEMCON. It lists various sizes and weight options for round, round with dimple, round with dimple and feet, triangle with dimple and feet, and 4 leg oblong dome styles. The document also mentions other dome and dome array styles are available and provides contact information for sample requests and quotations.
More Related Content
Similar to Memcon Micchp 120-hand-press-1
idclamping_en-webseite.pdf
Fixture elements
I.D. CLAMPING
from SMW-AUTOBLOK
HIGH PRECISION
Standard and special solutions.
Application/customer benefi ts
• For turning, milling, grinding and gear cutting operations
• High accuracy and torque transmission
• Clamping of very short workpieces on the front section of the sleeve possible
• FP: With axial pull down for best face run out.
Technical features
• Large expansibility 0.6 - 1.2 mm depending on size
• Power operated / manual lubrication
• Flange mounting
• Very rigid design
• Vulcanized expanding sleeve for protection from the penetration of chips (option)
• Preparation for air sensing
Standard equipment
Basic mandrel with draw bolt for power operation
Mounting bolts
Masafi Powertech Private Limited, Chennai, Electrical Supplies
We are manufactures of Cable Cleat, Cable Lugs and Link Boxes, we have wide range and varieties of these items in the brand name of MAICO. All our products are designed by experienced engineers and tested at renowned organization CPRI. All these products are manufactured in our own manufacturing unit located at Chennai using our own dies and patterns. Our manufacturing, testing, packing, despatch and delivery process adhere to international quality standards.
hydratight-machining-catalog
The company started with one product and a dream to become a world leader in field machining equipment. It now offers a full line of patented clamshells, boring bars, and other portable machining solutions. As the product line grew, so did the company's reputation as a world leader providing the highest quality equipment and support. The document provides an overview of the company and invites the reader to learn more about their products and services.
Brochure 958a Compact Housing Brochure
The 958A embedded linear displacement transducer provides accurate position feedback for automation applications. It features a rugged, compact design that can be installed inside hydraulic cylinders, protecting it from harsh conditions. The transducer uses proven magnetostrictive technology to measure position within 0.04% accuracy over programmable measurement ranges from 2 to 100 inches or millimeters. It is designed to withstand extreme vibration, shock, pressures, and temperatures from -40 to 105°C. The 958A provides various analog output options and connectors to interface with automation equipment.
Bolting tools
Powermaster manufacturer of bolting tools and bolting products, Hydraulic Torque Wrenches, Hydraulic Bolt Tensioners, Pneumatic Torque Wrenches, Backup Wrenches, Mechanical Torque Wrenches and others.
Electrical Crimping
As a technique, crimping can produce long-lasting joints, efficiently and easily with very little training. Nowadays, Crimping has taken the place of soldering in many electrical applications and now is the most extensively used way for connections. When crimped properly, the strands remain individual even upon entering the insulation crimp, making the chances of strands breaking low,which ensure mechanically stability and corrosion-resistance. The proper crimping requires the contact, corresponding wire, and the most essential part--a suitable crimping tool.
IWISS with its sub-brand iCrimp offers crimping tools for virtually all types of electrical connections in the market, non-insulated, insulated, battery lug,open barrel, closed barrel, etc.
1.Made of high-quality steel, durable enough for long term service.
2.Accurate jaw design guarantees perfect crimping every time
3.Upgraded structure brings an effortless and stable operation
In the past decades, our team committed to R&D and released various new style crimping tools to make the crimping more efficiently and easily. To meet requirements in different countries, we also made the tools in both metric and imperial standards.
IWISS tools are designed to create more efficient power to make perfect crimping. We keep working to fulfill our commitment to providing every customer with high-quality tools for electrical applications.
Cylinder-and-synchronous-lifting-system.pdf
TorcStark® is a professional manufacturer and supplier of hydraulic equipment. Mainly produce hydraulic torque wrenches, hydraulic bolt tensioners, hydraulic torque/tensioner pumps and other products.
Cylinder and synchronous lifting system
This document provides information about Pingyuan Jingke Hydraulic Co., Ltd, a manufacturer of hydraulic bolting tools and solutions. It summarizes several hydraulic bolting systems they produce including synchronous lifting systems, variable frequency control systems, three dimensional lifting systems, and walking type lifting systems. It also provides technical specifications and parameters for hydraulic cylinders and components.
Manual conversor dc siemens
The document provides an overview of the SIMOREG 6RA70 DC MASTER product line. It describes the power section and cooling features, as well as the parameterization devices, software structure, closed-loop control functions, monitoring and diagnosis functions, and interfaces. The converters are fully digital, compact units that supply armature and field circuits of variable-speed DC drives. They have rated DC currents from 15A to 3000A. The overview discusses the design, control features, options, planning guide, retrofitting capabilities, and protection devices. It provides guidance on selecting the appropriate converter and includes dimensional drawings and documentation.
Manufacturing slick090517
Craig Technologies Aerospace Solutions (CTAS) supports your projects from concept to real-world
application or at any scalable solution in-between. CTAS takes pride in responding to the everchanging
needs of our customers by placing an emphasis on evaluating our manufacturing
processes and making continual improvements. Our small business flexibility, lean management
team and industry-leading employee benefits help us deliver exceptional customer-driven solutions
and a quick and cost-effective solution to any priority need.
Dyadics scn5 datasheet
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- Models range from $295 to $695 and provide thrusts from 10-50kg with strokes from 50-300mm.
- Features include integrated motor, encoder and drive for precision; optimized screw and nut mechanism for accuracy and longevity.
- Models include basic, standard, dust-proof, and slider types for different environments and applications.
CUTTING TABLES MCV: stations and cutters
This document provides information about cutting tables and accessories from MCV. It includes specifications for different models of cutting tables that vary in length from 2000mm to 6000mm and width from 600mm to 1000mm. It also describes various optional cutting and forming stations that can be added, such as vertical and round cutting stations, dough folding, marking, and collecting stations. The document provides detailed specifications for cutting rollers used in the vertical cutting station, including dimensions, materials, and example products they can be used to manufacture.
Belimo lm
The document provides information on the LM Series direct coupled actuators from Belimo, including the LM24-3 US and LM24-SR-2.0 US models. It describes the actuators as being small yet powerful, with a minimum 35 in-lb torque allowing control of damper areas up to 8 square feet. The LM24-3 US is for on-off/floating point control using 24V power, while the LM24-SR-2.0 US provides proportional control via a 2-10VDC or 4-20mA input signal and includes electronic angle limiting from 20-100% rotation. Installation and operation instructions are included along with specifications, dimensions, accessories and agency listings for the actu
Applied motion products si5580 datasheet
This document provides information on the Si5580 Programmable Step Motor Drive from Applied Motion Products, including its features, specifications, and recommended NEMA 23 and 34 stepper motors to use with the drive. The Si5580 allows software control of motor current, resolution, idle current reduction, and has 8 programmable inputs and 3 outputs. It can drive 4, 6, or 8 lead stepper motors and includes programming software.
Karadautocomponentscompanypfofile
arad Auto Components has two Sister Concerns Also, 1) Excellence Castings Pvt. Ltd. . 2) Abhishek Enterprises. Karad Auto Components was incepted in 1999 with a vision of manufacturing high quality Machined Components and Shock Ab-sobers and Suspention
Semiconductor equipment parts in stock-SSe-0141
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
10304634
This document provides an overview and technical specifications for Siemens tiastar Motor Control Centers (MCCs). It describes the key features and benefits of standard tiastar MCCs, arc resistant tiastar MCCs, and smart tiastar MCCs. It also includes sections on codes and standards, estimated weights, wiring classes and types, heat dissipation, altitude ratings, structure and bussing options, units, and other technical details.
Empowering Grid Stability: Schneider Micom P127's Advanced Overcurrent Solutions
Empowering Grid Stability: Schneider Micom P127's Advanced Overcurrent SolutionsDigital and Smart Grid Enterprises
Schneider Micom P127 relay is part of MiCOM P12x, a range of directional and non-directional overcurrent relays from single-phase or earth fault up to the multifunctional three-phase P127 numerical relay with voltage protection functions.
Open manipulator x-assembly_guide_ver1913
ROS対応ロボットアームキット OpenMANIPULATOR-X RM-X52-TNMのハードウェア組立マニュアルです。
商品ページ
https://e-shop.robotis.co.jp/product.php?id=265
チュートリアル
https://emanual.robotis.com/docs/en/platform/openmanipulator_x/overview/
CNC machine
This presentation summarizes the key characteristics of CNC machines. It describes how CNC machines are automated machine tools controlled by programmed commands stored on a computer. The history of CNC is outlined from its origins in the 1950s to become widely used today. The main types of CNC machines are identified as turning centers, milling centers, vertical machining centers, horizontal machining centers, drilling machines, EDM machines, and laser cutting machines. Programming codes like G-codes and M-codes are discussed as well as how CNC machines work through precise positioning coordinates.
Similar to Memcon Micchp 120-hand-press-1 (20)
Masafi Powertech Private Limited, Chennai, Electrical Supplies
Masafi Powertech Private Limited, Chennai, Electrical Supplies
Empowering Grid Stability: Schneider Micom P127's Advanced Overcurrent Solutions
Empowering Grid Stability: Schneider Micom P127's Advanced Overcurrent Solutions
More from Phil Heft
Memcon 0603 ultra thin smd leds ml197 series
This document provides specifications for 0603 chip size surface mount LEDs that are ideal for applications requiring an ultra-thin device, such as membrane switches, flexible circuits, and LCD backlighting. The LEDs come in various colors on 8mm tape and reel compatible with automated placement equipment, with 3,000 pieces per reel. They are moisture resistant and RoHS and Pb-free compliant.
Memcon Tactile Metal Domes Range
This document provides information about metal domes for membrane switches and flexible circuits available from MEMCON. It lists various sizes and weight options for round, round with dimple, round with dimple and feet, triangle with dimple and feet, and 4 leg oblong dome styles. The document also mentions other dome and dome array styles are available and provides contact information for sample requests and quotations.
Memcon 1.27mm crimp height guidelines
MEMCON provides guidelines for acceptable crimp heights when crimping electrical connections. The crimp height for tails including stiffeners between 0.125mm and 0.35mm thick should be between 0.7mm and 0.85mm. The crimp height alone should not be used to reject or accept a crimping but should indicate need for further inspection. A crimp height outside this range could mean a gap between contact and tail for ones too high, or cracking of the conductor for ones too low.
Memcon Metal dome oblong double sided pcb layout
This document provides contact and location information for Memcon, an electronics manufacturing company with offices in Hong Kong, the United Kingdom, and the United States. It also includes a table with specifications for double sided printed circuit board layouts, including body lengths, hole diameters, and plate thicknesses.
Memcon Micc integrated crimp connector tin cross reference guide
This document provides a cross-reference guide for MICC integrated crimp connectors with tin plating that lists the MICC part numbers, descriptions, and equivalent FCI Berg Clincher part numbers for connectors with 2 to 25 connections.
Situational analysis
The document outlines a company's situational analysis and goals. It lists increasing visibility, developing new products and a sales organization, commitment to research and development, and responsiveness as areas for improvement. The goals are to grow market share in military/aerospace and high-end industries, displace flexible circuit competitors, and maximize profits from existing membrane switch and indicator products.
Memcon Conflict minerals-statement
The document is a conflict minerals statement from Memcon Limited. It summarizes the Dodd-Frank Act requirements for publicly traded companies to report on "conflict minerals" such as tin, tantalum, tungsten and gold sourced from conflict areas. The act aims to promote transparency in mineral supply chains and prevent the extraction and trade of minerals from becoming a source of conflict or human rights abuses. Memcon works with its suppliers to ensure they are aware of this policy and sources materials from socially and ethically responsible sources.
Memcon Mhfbh housing-series-with-blanked-out-hole-specification
Memcon MHFBH Housings blank out a hole for polarization. A unique solution saving time and cost over using a polarization pin
Memcon 1.27mm Mptbwrd series-double-row-thru-hole-right-angle
New from Memcon -- increasing Male PCB Header offering at industry standard 1.27mm pitch. This 2 Row Right angle offering in addition to the Vertical provides up to 100 position.
Memcon Mpsbwr series-single-row-right-angle-smt
New PCB Header from Memcon. Single Row Surface Mount Right Angle completing a full offering to mate to industry standard latching connectors. Experience the Memcon difference - committed to top quality and service but saving you cost
Memcon Mpsbws series single row 1.27mm straight vertical smt
Memcon 1.27mm pitch SMT Headers. New vertical and right angle series - industry standard. From Memcon - Your Resource
Memcon Mpsbws 1.27mm series-single-row-straight-vertical-smt
Memcon MPSBWS Series Male PCB Header - 1.27mm pitch, Vertical Mount SMT. Industry Standard with Memcon Difference.
New Expanded offering
Memcon MPTBWR series-single-row-thru-hole-right-angle
This document provides specifications for MPTBWR Series single row through hole right angle walled latching pin headers, including current rating, withstanding voltage, voltage rating, temperature range, ways available, mating connector, recommended PCB layout, and outline dimensions. Key features are a current rating of 2A AC, withstanding voltage of 900VRMS, voltage rating of 300VRMS, temperature range of -40°C to +125°C, and availability in 4 to 50 ways.
Memcon Mcs540 ag silver conductive ink - perfect for ITO Applications
This document provides information on MCS-540AG, a silver conductive screen printable ink formulated for use in flexible applications like electro luminescence sheets. It has excellent adhesion to substrates like ITO, polyester, and polymide. The ink possesses good conductivity, abrasion resistance, and printability due to a unique combination of silver flake and resin technology. It can be used for manual and semi-automatic printing and offers a long residence time on screens. Safety precautions are provided for handling the ink.
Memcon Mhfbh series housings with blanked out hole
Memcon MHFBH blanks out a hole, avoiding need for polarizing pin. Another great idea from Your Resource for PEMS
Memcon Mh937 housing-series-specification - 1.27mm 2 row latching
This 3 sentence summary provides the high level information about the document:
The document contains proprietary technical characteristics for a polarized and locking housing including the material, classification, color, number of ways, pitch, and compliance with RoHS standards. It specifies the housing is made of thermoplastic with glass fiber, classified as UL94VO, and is black as standard with other colors available upon request. The technical drawing shows dimensions for an 8 to 100 way housing with a 1.27mm pitch.
Memcon 4 leg-dome-with-hole - NEW 14mm Offering
Memcon tactile metal domes -- huge selection of sizes, shapes, activation forces and styles. NEW 14mm 4 Legged Dome with a Hole
Memcon Tape reel-metal-domes-2-pages
This document provides specifications for metal dome switches available in various sizes from 8.4mm to 20mm. The dome switches are available with nickel or gold plating, with or without dimples, and can be supplied on reels of various quantities. They are compliant with RoHS standards and have operating temperatures from -55°C to 125°C.
Memcon Mccm475 long-square-male-contact-crimping-machine
This document provides information about the Memcon Long Square Male Contact Crimping Machine MCCM475. The machine is designed for fast, efficient, and easy crimping of crimp contacts to membrane switches, flat flexible circuits, touch screens, and textile ribbons. It can crimp 1-25 ways in one operation using a long square male die and is suitable for crimping MSMC410 and MRSMC756 contacts. The graduated hand feeder ensures a repeatable and consistent crimp quality each time. Dimensions and weight specifications for the machine and shipping crate are provided.
Memcon 2.54mm flexible flat copper cable
FFC Cable - 2.54mm pitch specification. Used for Memcon Terminated Jumper Cables - Male/Female/Soldertab callouts in all pin out and lengths
More from Phil Heft (20)
Memcon Micc integrated crimp connector tin cross reference guide
Memcon Micc integrated crimp connector tin cross reference guide
Memcon Mhfbh housing-series-with-blanked-out-hole-specification
Memcon Mhfbh housing-series-with-blanked-out-hole-specification
Memcon 1.27mm Mptbwrd series-double-row-thru-hole-right-angle
Memcon 1.27mm Mptbwrd series-double-row-thru-hole-right-angle
Memcon Mpsbws series single row 1.27mm straight vertical smt
Memcon Mpsbws series single row 1.27mm straight vertical smt
Memcon Mpsbws 1.27mm series-single-row-straight-vertical-smt
Memcon Mpsbws 1.27mm series-single-row-straight-vertical-smt
Memcon MPTBWR series-single-row-thru-hole-right-angle
Memcon MPTBWR series-single-row-thru-hole-right-angle
Memcon Mcs540 ag silver conductive ink - perfect for ITO Applications
Memcon Mcs540 ag silver conductive ink - perfect for ITO Applications
Memcon Mhfbh series housings with blanked out hole
Memcon Mhfbh series housings with blanked out hole
Memcon Mh937 housing-series-specification - 1.27mm 2 row latching
Memcon Mh937 housing-series-specification - 1.27mm 2 row latching
Memcon Mccm475 long-square-male-contact-crimping-machine
Memcon Mccm475 long-square-male-contact-crimping-machine
Recently uploaded
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSLA HUG - Video Testimonials with Chynna Morgan - June 2024
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
Understanding User Needs and Satisfying Them
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Recently uploaded (20)
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Training my puppy and implementation in this story
Training my puppy and implementation in this story
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
LA HUG - Video Testimonials with Chynna Morgan - June 2024
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...
Memcon Micchp 120-hand-press-1
- 1. Integrated Crimp Connector MICCHP-120 Hand Press MICCMD-102 2 Way MICCMD-103 3 Way MICCMD-104 4 Way MICCMD-105 5 Way MICCMD-106 6 Way MICCMD-107 7 Way MICCMD-108 8 Way MICCMD-109 9 Way MICCMD-110 10 Way MICCMD-111 11 Way MICCMD-112 12 Way MICCMD-113 13 Way MICCMD-114 14 Way MICCMD-115 15 Way MICCMD-116 16 Way MICCMD-117 17 Way MICCMD-118 18 Way MICCMD-119 19 Way MICCMD-120 20 Way MICCMD-121 21 Way MICCMD-122 22 Way MICCMD-123 23 Way MICCMD-124 24 Way MICCMD-125 25 Way MICCMD-126 26 Way MICCMD-127 27 Way MICCMD-128 28 Way Die Set Part Number/No of Ways Designed for fast, efficient and easy crimping of MICC Connectors to Membrane Switches and Flat Flexible Circuits Crimps 2-28 Ways in one operation Fast and easy changing of Dies to change Number of Ways Supplied with Six Dies, other Dies can be ordered as and when required Mass crimping ensures a repeatable, consistant quality of crimp each time Net Weight 18Kgs Gross Weight 29Kgs Dimensions: 40 (L) x 33 (W) x 57 (H) cm Shipping Crate: 58 (L) x 30 (W) x 46 (H) cm Compass House Vision Park Chivers Way HISTON Cambridge CB24 9AD United Kingdom T +44 1223 257724 F +44 1223 257800 www.memcon.eu sales@memcon.eu Limited 6000 Red Arrow Hwy Unit I Stevensville Michigan 49127 USA T +1 269 281 0478 F +1 269 593 5952 www.memcon.net sales@memcon.net North America MEMCON is a registered trade mark of Memcon LimitedR GB Issue 4 Units 5/6 6/F Westley Square 48 Hoi Yuen Rd Kwun Tong Hong Kong T +852 3741 1411 F +852 3747 8980 www.memcon.asia sales@memcon.asia (Asia) Limited