MECH SEAL is a South African company established in 2013 that specializes in fluid sealing products such as mechanical seals, gland packing, gasketing, shaft couplings, valves, bearings, and mechanical seal and pump reconditioning. The company aims to serve as a cost-effective alternative to expensive imported seals while delivering outstanding customer service to reduce downtime. MECH SEAL strives for growth through customer referrals and adheres to B-BBEE legislation and affirmative action initiatives.
We are manufacturer & exporter of Collets & collets Chucks that are compatible with the OEM standards. Our collets can also be custom manufactured as per client's needs.
Sapparts - Manufacturers, Suppliers Mechanical face Sealssapparts
An end face mechanical seal, also known as a mechanical face seal but usually simply as a mechanical seal, is a type of seal utilised in rotating equipment, such as pumps, mixers, blowers, and compressors.
We are manufacturer & exporter of Collets & collets Chucks that are compatible with the OEM standards. Our collets can also be custom manufactured as per client's needs.
Sapparts - Manufacturers, Suppliers Mechanical face Sealssapparts
An end face mechanical seal, also known as a mechanical face seal but usually simply as a mechanical seal, is a type of seal utilised in rotating equipment, such as pumps, mixers, blowers, and compressors.
Mechanical Seals Distributor & Manufacturer of Mechanical seals and pump sealing Single Cartridge & Double Cartidge
Seals ! - Replicas of seals from SEALS
Chesterton, Durametallic, Metal
Bellows Seals, Borg Warner, Anchor,
and Robco, just to name a few. We
also offer spilt seals !!! http://www.sealsales.com
Centrifugal pumps are machines which use centrifugal force to move liquids. In this program, you will learn the principles, parts, and general operation of these pumps, what pump efficiency is, and how head and pressure are calculated.
7 3/8-10K Safety Head (Compact Cutting Device) - WOM Groupwomgroup
WOM's 7-3/8 – 10K Compact Cutting Device (CCD) designed with opposing horizontal hydraulically actuated gate valves made to shear coiled tubing, drill pipe, and wire line of a given specification in the wellbore and seal from below.
Magnum Subsea Dual Block - Worldwide Oilfield Machinewomgroup
WOM's Magnum Subsea Dual Block has a unique bi-directional sealing design providing a thru-conduit, upstream and downstream seal which creates a pressure-energized balance between the slab gate and seat assemblies when subjected to line pressure.
7 3/8-10K High Angle Release (HAR) Connector - WOM Groupwomgroup
Worldwide Oilfield Machine (WOM) developed a High Angle release Connector (HAR). The connector connects EDP package to the LRP by latching on to the re-entry mandrel.
X-Mas Tree for Mudline Suspension System - Worldwide Oilfield Machinewomgroup
WOM offers X-Mas Trees to be used on shallow water completions for marginal fields. Typically used along with jack up completion in shallow water operations. A cost-effective solution for shallow water completions coupled with WOM’s MLS Wellhead.
Magnum Subsea Gate Valve - Worldwide Oilfield Machinewomgroup
WOM's all Magnum Subsea Gate Valves are designed, manufactured, and tested to API 6A and 17G.Unique bi-directional sealing design provides a thru-conduit, upstream and downstream seal which creates a pressure-energized balance between the slab gate and seat assemblies when subjected to line pressure.
WOM has developed 7-3/8”–10K Wireline Cutting Valve based on gate valve concept to cut and seal wireline/Slickline. The wireline cutting valve is equipment with hydraulically actuated gate made to shear and seal wireline/slickline of a given specification in the wellbore.
Worldwide Oilfield Machine has developed a 7-3/8”–10K Coil Cutting Valve based on gate valve concept to cut and seal coil tubing. The Coil cutting valve is equipped with horizontal hydraulically actuated single gate made to shear and seal coiled tubing and wire line of a given specification in the wellbore.
Vertical X-Mas Subsea Trees, Injection Subsea Trees - WOM Groupwomgroup
WOM offers Production & Injection Subsea Trees for both shallow water and deep-water applications. Vertical subsea trees are available in mono-bore and dual bore configurations.
WOM Group manufactures Jumpers that are used as an interface between subsea wells, manifolds, riser bases, and flowlines while accommodating significant static and dynamic loads.
Riser Base, Riser Base Subsea Manifolds - Worldwide Oilfield Machinewomgroup
WOM Group provides Riser base, a subsea support structure used to tie-in a pipeline at one end and provide vertical flange connection to facilities to connect riser jumper at the other.
WOM has major areas of expertise in the design and construction of Subsea Manifolds, PLETs and PLEMs. We provide detail engineering and project management to our clients to ensure successful completion of these structures.
Mud mats provide a foundation for subsea equipment. According to the soil’s untrained shear strength and the supported equipment’s loading conditions, a mud mat may vary in overall size and skirt depth to prove the bearing capacity, overturning and sliding & torsion capability of subsea equipment.
Mechanical Seals Distributor & Manufacturer of Mechanical seals and pump sealing Single Cartridge & Double Cartidge
Seals ! - Replicas of seals from SEALS
Chesterton, Durametallic, Metal
Bellows Seals, Borg Warner, Anchor,
and Robco, just to name a few. We
also offer spilt seals !!! http://www.sealsales.com
Centrifugal pumps are machines which use centrifugal force to move liquids. In this program, you will learn the principles, parts, and general operation of these pumps, what pump efficiency is, and how head and pressure are calculated.
7 3/8-10K Safety Head (Compact Cutting Device) - WOM Groupwomgroup
WOM's 7-3/8 – 10K Compact Cutting Device (CCD) designed with opposing horizontal hydraulically actuated gate valves made to shear coiled tubing, drill pipe, and wire line of a given specification in the wellbore and seal from below.
Magnum Subsea Dual Block - Worldwide Oilfield Machinewomgroup
WOM's Magnum Subsea Dual Block has a unique bi-directional sealing design providing a thru-conduit, upstream and downstream seal which creates a pressure-energized balance between the slab gate and seat assemblies when subjected to line pressure.
7 3/8-10K High Angle Release (HAR) Connector - WOM Groupwomgroup
Worldwide Oilfield Machine (WOM) developed a High Angle release Connector (HAR). The connector connects EDP package to the LRP by latching on to the re-entry mandrel.
X-Mas Tree for Mudline Suspension System - Worldwide Oilfield Machinewomgroup
WOM offers X-Mas Trees to be used on shallow water completions for marginal fields. Typically used along with jack up completion in shallow water operations. A cost-effective solution for shallow water completions coupled with WOM’s MLS Wellhead.
Magnum Subsea Gate Valve - Worldwide Oilfield Machinewomgroup
WOM's all Magnum Subsea Gate Valves are designed, manufactured, and tested to API 6A and 17G.Unique bi-directional sealing design provides a thru-conduit, upstream and downstream seal which creates a pressure-energized balance between the slab gate and seat assemblies when subjected to line pressure.
WOM has developed 7-3/8”–10K Wireline Cutting Valve based on gate valve concept to cut and seal wireline/Slickline. The wireline cutting valve is equipment with hydraulically actuated gate made to shear and seal wireline/slickline of a given specification in the wellbore.
Worldwide Oilfield Machine has developed a 7-3/8”–10K Coil Cutting Valve based on gate valve concept to cut and seal coil tubing. The Coil cutting valve is equipped with horizontal hydraulically actuated single gate made to shear and seal coiled tubing and wire line of a given specification in the wellbore.
Vertical X-Mas Subsea Trees, Injection Subsea Trees - WOM Groupwomgroup
WOM offers Production & Injection Subsea Trees for both shallow water and deep-water applications. Vertical subsea trees are available in mono-bore and dual bore configurations.
WOM Group manufactures Jumpers that are used as an interface between subsea wells, manifolds, riser bases, and flowlines while accommodating significant static and dynamic loads.
Riser Base, Riser Base Subsea Manifolds - Worldwide Oilfield Machinewomgroup
WOM Group provides Riser base, a subsea support structure used to tie-in a pipeline at one end and provide vertical flange connection to facilities to connect riser jumper at the other.
WOM has major areas of expertise in the design and construction of Subsea Manifolds, PLETs and PLEMs. We provide detail engineering and project management to our clients to ensure successful completion of these structures.
Mud mats provide a foundation for subsea equipment. According to the soil’s untrained shear strength and the supported equipment’s loading conditions, a mud mat may vary in overall size and skirt depth to prove the bearing capacity, overturning and sliding & torsion capability of subsea equipment.
Riser Base, Riser Base Oilfield Equipment - WOM Groupwomgroup
WOM's Riser Bases are subsea support structures used to tie-in a pipeline at one end and provide vertical flange connection to facilities to connect riser jumper at the other.
WOM's Vertical Flowline connectors are one of the most critical parts of any subsea system, as they are required to seal under heavy loads. Subsea connectors use hydraulically actuated Collet segments or lock rings to connect to the hub and generate pre-load.
WOM’s Pipe Line End Manifolds (PLEM’s) and Pipe Line End Terminations (PLET’s) utilize Magnum Dual Block Valves (ROV Operated) and Magnum Subsea Gate Valves.
Plem Plet, Plem Plet Oilfield Equipments - WOM Group
Mech Seal Company Profile
1. COMPANY PROFILE
SPECIALISTS IN FLUID SEALING PRODUCTS
Mechanical Seals
Gland Packing
Gasketing
Shaft Couplings
Valves
Bearings
Mechanical Seal and Pump Reconditioning
Design, Manufacturing, Installation and Reconditioning of all mechanical seals and related sealing products
Design, Manufacturing, Supply and Reconditioning of Swivel Joints
Reconditioning of Centrifugal Pumps
Various Shaft Couplings
CNC Machining
Neil Engelbrecht
CEO / Director - Sales
Telephone: +27 76 717 8883
Email: neil@mech-seal.co.za
Website: www.mech-seal.co.za
Reg. no. 2014/191592/07
Vat. No. 4620270183
2. MECH SEAL was established in 2013 to service the mechanical seal needs of the greater
Midrand and Centurion areas of Pretoria in Gauteng South Africa and has since expanded to
cover virtually the entire South Africa, servicing clients from Limpopo to the Western Cape.
With a combined experience of more than half a century, our manufacturing and engineering
team has the necessary expertise to develop mechanical seals to satisfy every customers’
unique requirements and specifications.
Vision Statement
As a proudly South African company, MECH SEAL provides a cost effective yet equal quality
alternative to the expensive branded imported seals dominating the market at present.
We strive to be the “go-to” guys of the industry, through hard work and dedication to all our
customers; each customer will be treated as if they are the only customer, large or small.
Mission Statement
We strive to reduce downtime and get our customers back up and running in as short a time
frame as possible, so that they can get back to doing what they do best.
Values
MECH SEAL applies to the following core values to our operations:
We conduct business honestly and fairly,
With a strong stance against corruption
Dishonesty shall not be tolerated
There is no substitute for hard work
We do not negotiate on quality to reduce the price
Business Goals & Objectives
Our main goal is to serve our loyal customers and become a brand that customers can rely
on. Our objective is to position the MECH SEAL brand in the fluid control industry as the
experts to call regarding your fluid sealing requirements.
Growth Strategy
MECH SEAL has stepped out of the conventions of past decades and embraced the modern
age with a large footprint in the social and online media sector. This has vastly increased our
audience from a select few customers that specifically need our services, to tens of
thousands of people that see what we do and have the ability to speak to an employer about
our services.
We aim to generate growth via word of mouth by delivering an outstanding service to our
customers and in that way generate referrals.
3. Affirmative Action Initiatives
MECH SEAL adheres to the prescribed B-BBEE Legislation and have the following
initiatives in place to further improve our Employment Equity status:
i. The advancement of woman and people of color up to board of director level.
ii. Equity ownership of woman and people of color.
iii. Procurement of work and maintenance contracts from Black-owned businesses.
B-BBEE
MECH SEAL is a level 4 B-BBEE rated company with 30% Black ownership
PRODUCTS AND SERVICES
Mechanical Seal
An end face mechanical seal uses both rigid and flexible elements that maintain contact at a
sealing interface and slide on each other, allowing a rotating element to pass through a
sealed case. The elements are both hydraulically and mechanically loaded with a spring or
other device to maintain contact.
Gland Packing
When a pump operates, the liquid could leak out of the pump between the rotating shaft and
the stationary pump casing. Since the shaft rotates, preventing this leakage can be difficult.
Earlier pump models used mechanical packing (otherwise known as Gland Packing) to seal
the shaft. Since World War II, mechanical seals have replaced packing in many
applications.
4. Gasketing
A gasket is a mechanical seal which fills the space between two or more mating surfaces,
generally to prevent leakage from or into the joined objects while under compression.
Shaft Couplings
The primary purpose of couplings is to join two pieces of rotating equipment while permitting
some degree of misalignment or end movement or both. By careful selection, installation
and maintenance of couplings, substantial savings can be made in reduced maintenance
costs and downtime.
Valves
A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids,
fluidized solids, or slurries) by opening, closing, or partially obstructing various
passageways. Valves are technically valves fittings, but are usually discussed as a separate
category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
5. Swivel Joint
A swivel joint for a pipe is often a threaded connection in between which at least one of the
pipes is curved, often at an angle of 45 or 90 degrees. The connection is tightened enough
to be water- or air-tight and then tightened further so that it is in the correct position.
Bearings
A bearing is a machine element that constrains relative motion to only the desired motion,
and reduces friction between moving parts . The design of the bearing may, for example,
provide for free linear movement of the moving part or for free rotation around a fixed axis;
or, it may prevent a motion by controlling the vectors of normal forces that bear on the
moving parts.
CNC Machining
In modern CNC systems, end-to-end component design is highly automated using
computer-aided design (CAD) and computer-aided manufacturing (CAM) programs. The
programs produce a computer file that is interpreted to extract the commands needed to
operate a particular machine via a post processor, and then loaded into the CNC machines
for production. Since any particular component might require the use of a number of
different tools – drills, saws, etc., modern machines often combine multiple tools into a
single "cell". In other installations, a number of different machines are used with an external
controller and human or robotic operators that move the component from machine to
machine. In either case, the series of steps needed to produce any part is highly automated
and produces a part that closely matches the original CAD design