This document presents a framework for Performance-Based Hurricane Engineering (PBHE) that accounts for the multi-hazard nature of hurricanes. The framework disaggregates risk assessment into components including hazard analysis, structural characterization, environment-structure interaction analysis, structural analysis, damage analysis, and loss analysis. It considers the separate and interacting effects of hurricane wind, flood, windborne debris, and rainfall hazards. The framework characterizes uncertainties from the environment, structural system, and their interaction. It provides a basis for probabilistic risk assessment and design of structures subjected to multi-hazard hurricane scenarios.
In recent years more and more demanding structures are designed, built and operated
to satisfy the increasing needs of the Society. This kind of structures can be denoted
as complex ones. Among large constructions arrangements, Offshore Wind Turbines
(OWT) are definitely complex structural systems, being this complexity related to
different aspects such as hard nonlinearities, wide uncertainties and strong
interactions, either among the single parts or between the whole structure and the
design environment.
On the whole, the quality of a complex system is denoted by the idea of
dependability, while for a structure the performances are connected to the property of
structural integrity, considered as the completeness and consistency of the structural
configuration. Even if these concepts have been originally developed, respectively, in
computer science and for aerospace applications they can be applied to other high
performance systems as OWT.
The present paper will show some specific aspects of the modern approach
for the design and the analysis of complex structural systems. In the first part of the
paper, the general aspects are recalled like the System Engineering approach and the
Performance-based Design. Attention is devoted to some important aspects, such as
the structure breakdown and the safety and performance allocations. In the second
part of the paper, a basic application of the concepts introduced is presented.
Genetic algorithms for the dependability assurance in the design of a long sp...Franco Bontempi
A long-span suspension bridge is a complex
structural system that interacts with the surrounding
environment and the users. The environmental actions
and the corresponding loads (wind, temperature, rain,
earthquake, etc.) together with the live loads (railway
traffic, highway traffic), have a strong influence on the
dynamic response of the bridge, and can significantly
influence the structural behavior and alter its geometry,
thus limiting the serviceability performance even up to a
partial closure. This article will present some general considerations
and operative aspects of the activities related
to the analysis and design of such a complex structural
system. Specific reference is made to the dependability assessment
and the performance requirements of the whole
system, while focus is given on methods for handling the
completeness and the uncertainty in the assessment of the
load scenarios. Aiming at the serviceability assessment,
a method based on the combined application of genetic
algorithms and a finite element method (FEM) investigation
is proposed and applied.
In recent years, structural integrity monitoring has become increasingly important in structural engineering and construction management. It represents an important tool for the assessment of the dependability of existing complex structural systems as it integrates, in a unified perspective, advanced engineering analyses and experimental data processing. In the first part of this work
the concepts of dependability and structural integrity are
discussed and it is shown that an effective integrity assessment
needs advanced computational methods. For this purpose, soft computing methods have shown to be very useful. In particular, in this work the neural networks model is chosen and successfully improved by applying the Bayesian inference at four hierarchical levels: for training, optimization of the regularization terms, databased model selection, and evaluation of the relative importance of different inputs. In the second part of the article,
Bayesian neural networks are used to formulate a
multilevel strategy for the monitoring of the integrity of long span bridges subjected to environmental actions: in a first level the occurrence of damage is detected; in a following level the specific damaged element is recognized and the intensity of damage is quantified.
Causal models for the forensic investigation of structural failuresFranco Bontempi
The structural collapses are rare events that are characterized by complex dynamics: the identification
of their causes and the explanation of their developments are not straightforward processes and depend on numerous different factors. A fundamental aspect is that, even if sometimes it is possible to identify the trigger that have materially caused the collapse, usually there is a complex background of situations that have made the event possible and that need to be accurately analyzed. The investigation of the interrelated aspects and concurrent
causes is a fundamental task to assign conveniently the civil and criminal responsibilities. Starting from these considerations, the aim of this paper is to present some concepts that, in the Authors’ opinion, constitute a basis for the framework of the investigation activities. In the first part of thework two concepts are discussed. The first one is the concept of structural complexity, which is an attribute of the civil constructions that are characterized
by significant interactions, strong nonlinearities, and large uncertainties. The second concept regards the extension to the Civil Engineering field of a model for the development of failures proposed by Reason (Swiss Cheese Model, 1990). In the second part of the paper some operational approaches are briefly introduced: the breakdown of the problem and the analysis of the timeline; they are essential tools for the assignment of the various responsibility profiles.At the end of the contribution, the concept of structural dependability is recalled as an antidote to avoid failures providing high-quality structural design.
This paper deals with the general framework for the development and the maintenance of complex structural systems. In the first part, starting with a semantic analysis of the term ‘structure’, the traditional approach to structural problem solving has been reconsidered. Consequently, a systemic approach for the formulation of the different kinds of direct and inverse problems has been framed, particularly with regards to structural design and
maintenance. The overall design phase is defined with the aid of the performance-based design (PBD) philosophy, emphasizing the concepts of dependability and enlightening the role of structural identification. The second part of the present work analyses structural health monitoring (SHM) in the systemic way previously introduced. Finally, the techniques related to the implementation of the monitoring process are introduced and a synoptic overview of methods and instruments for structural health monitoring is
presented, with particular attention to the ones necessary for structural damage identification.
Fragility analysis for the Performance-Based Design of cladding wall panels s...StroNGER2012
This paper presents a probabilistic method to support the design of cladding wall systems subjected to blast loads. The proposed method is based on the broadly adopted fragility analysis method (conditional approach), widely used in Performance-Based Design procedures for structures subjected to natural hazards like earthquake and wind. The cladding wall system under investigation is composed by non-load bearing precast concrete wall panels. From the blast design point of view, these wall panels must protect people and equipment from external detonations. The aim of this research is to compute both the fragility curves and the limit states exceedance probability of a typical precast concrete cladding wall panel considering the detonations of vehicle borne improvised explosive devices. Moreover, the limit states exceedance probability of the cladding wall panel is estimated by Monte Carlo simulation (unconditional approach) in order to validate the proposed fragility curves.
In recent years more and more demanding structures are designed, built and operated
to satisfy the increasing needs of the Society. This kind of structures can be denoted
as complex ones. Among large constructions arrangements, Offshore Wind Turbines
(OWT) are definitely complex structural systems, being this complexity related to
different aspects such as hard nonlinearities, wide uncertainties and strong
interactions, either among the single parts or between the whole structure and the
design environment.
On the whole, the quality of a complex system is denoted by the idea of
dependability, while for a structure the performances are connected to the property of
structural integrity, considered as the completeness and consistency of the structural
configuration. Even if these concepts have been originally developed, respectively, in
computer science and for aerospace applications they can be applied to other high
performance systems as OWT.
The present paper will show some specific aspects of the modern approach
for the design and the analysis of complex structural systems. In the first part of the
paper, the general aspects are recalled like the System Engineering approach and the
Performance-based Design. Attention is devoted to some important aspects, such as
the structure breakdown and the safety and performance allocations. In the second
part of the paper, a basic application of the concepts introduced is presented.
Genetic algorithms for the dependability assurance in the design of a long sp...Franco Bontempi
A long-span suspension bridge is a complex
structural system that interacts with the surrounding
environment and the users. The environmental actions
and the corresponding loads (wind, temperature, rain,
earthquake, etc.) together with the live loads (railway
traffic, highway traffic), have a strong influence on the
dynamic response of the bridge, and can significantly
influence the structural behavior and alter its geometry,
thus limiting the serviceability performance even up to a
partial closure. This article will present some general considerations
and operative aspects of the activities related
to the analysis and design of such a complex structural
system. Specific reference is made to the dependability assessment
and the performance requirements of the whole
system, while focus is given on methods for handling the
completeness and the uncertainty in the assessment of the
load scenarios. Aiming at the serviceability assessment,
a method based on the combined application of genetic
algorithms and a finite element method (FEM) investigation
is proposed and applied.
In recent years, structural integrity monitoring has become increasingly important in structural engineering and construction management. It represents an important tool for the assessment of the dependability of existing complex structural systems as it integrates, in a unified perspective, advanced engineering analyses and experimental data processing. In the first part of this work
the concepts of dependability and structural integrity are
discussed and it is shown that an effective integrity assessment
needs advanced computational methods. For this purpose, soft computing methods have shown to be very useful. In particular, in this work the neural networks model is chosen and successfully improved by applying the Bayesian inference at four hierarchical levels: for training, optimization of the regularization terms, databased model selection, and evaluation of the relative importance of different inputs. In the second part of the article,
Bayesian neural networks are used to formulate a
multilevel strategy for the monitoring of the integrity of long span bridges subjected to environmental actions: in a first level the occurrence of damage is detected; in a following level the specific damaged element is recognized and the intensity of damage is quantified.
Causal models for the forensic investigation of structural failuresFranco Bontempi
The structural collapses are rare events that are characterized by complex dynamics: the identification
of their causes and the explanation of their developments are not straightforward processes and depend on numerous different factors. A fundamental aspect is that, even if sometimes it is possible to identify the trigger that have materially caused the collapse, usually there is a complex background of situations that have made the event possible and that need to be accurately analyzed. The investigation of the interrelated aspects and concurrent
causes is a fundamental task to assign conveniently the civil and criminal responsibilities. Starting from these considerations, the aim of this paper is to present some concepts that, in the Authors’ opinion, constitute a basis for the framework of the investigation activities. In the first part of thework two concepts are discussed. The first one is the concept of structural complexity, which is an attribute of the civil constructions that are characterized
by significant interactions, strong nonlinearities, and large uncertainties. The second concept regards the extension to the Civil Engineering field of a model for the development of failures proposed by Reason (Swiss Cheese Model, 1990). In the second part of the paper some operational approaches are briefly introduced: the breakdown of the problem and the analysis of the timeline; they are essential tools for the assignment of the various responsibility profiles.At the end of the contribution, the concept of structural dependability is recalled as an antidote to avoid failures providing high-quality structural design.
This paper deals with the general framework for the development and the maintenance of complex structural systems. In the first part, starting with a semantic analysis of the term ‘structure’, the traditional approach to structural problem solving has been reconsidered. Consequently, a systemic approach for the formulation of the different kinds of direct and inverse problems has been framed, particularly with regards to structural design and
maintenance. The overall design phase is defined with the aid of the performance-based design (PBD) philosophy, emphasizing the concepts of dependability and enlightening the role of structural identification. The second part of the present work analyses structural health monitoring (SHM) in the systemic way previously introduced. Finally, the techniques related to the implementation of the monitoring process are introduced and a synoptic overview of methods and instruments for structural health monitoring is
presented, with particular attention to the ones necessary for structural damage identification.
Fragility analysis for the Performance-Based Design of cladding wall panels s...StroNGER2012
This paper presents a probabilistic method to support the design of cladding wall systems subjected to blast loads. The proposed method is based on the broadly adopted fragility analysis method (conditional approach), widely used in Performance-Based Design procedures for structures subjected to natural hazards like earthquake and wind. The cladding wall system under investigation is composed by non-load bearing precast concrete wall panels. From the blast design point of view, these wall panels must protect people and equipment from external detonations. The aim of this research is to compute both the fragility curves and the limit states exceedance probability of a typical precast concrete cladding wall panel considering the detonations of vehicle borne improvised explosive devices. Moreover, the limit states exceedance probability of the cladding wall panel is estimated by Monte Carlo simulation (unconditional approach) in order to validate the proposed fragility curves.
Guidelines for Design of Protective Structures Subjected To Unconfined Explos...IRJESJOURNAL
ABSTRACT:- In recent times, terrorist attacks are happening at major locations that pose significant threat to human life and infrastructure. The terrorist attack, especially the bomb explosion, causes catastrophic damage on structures, leading to loss of life and damage to assets. Thus, protection of structures against such extreme events or loading conditions is of prime importance. The loss of life and damage of the structure can be minimized by implementing suitable mitigation measures in both structural and non-structural design. The objective of this paper is to discuss on the guidelines for analysis and design of structural components of protective structures against blast pressure for an unconfined explosion. This paper covers in detail about the protection categories, risk assessment, Level of protection and damage, blast phenomenon and methods to predicting blast pressure, dynamic analysis, design and detailing
Multi-Hazard Assessment of Bridges in Case of Hazard Chain: State of Play and...Franco Bontempi
This study focuses on multi-hazard analysis for bridges, following a two-tier approach.
First, it identifies relevant open issues and recent literature developments in the field, presenting data in a meaningful manner, with specific focus on the issues related with the analysis of hazard chain scenario treated as low probability–high consequence events.
Second, it describes a practically useful and sufficiently generic approach for efficient computational investigation of hazard chain scenarios in highway bridges.
Following that, the applicability of the approach is exemplified in an appealing and commonly encountered in real-life hazard chain scenario, in which a multilevel modeling strategy is adopted to assess the structural response under hazard chain scenarios of a highway viaduct. Among the considered scenarios is the impact of a heavy vehicle (tank truck) on the bridge pier, and the fire spread following the collision due to the
presence of inflammable materials. The bridge structure is a typical 189-m-long multispan composite highway viaduct. The impact is modeled with a non-linear transient dynamic analysis that accounts the inertial effect of the global structure, while the
fire modeling is performed with non-linear quasi static dynamic analysis focusing on local behavior with a substructured model. Then different impact and fire scenarios are considered, including different impact velocities of the truck.
An overarching process to evaluate risks associated with infrastructure netwo...Infra Risk
International Conference Analysis and Management of Changing Risks for Natural Hazards. November 18-19, 2014, Padua, Italy.
‘An overarching process to evaluate risks associated with infrastructure networks due to natural hazards’ (extended abstract)
Hackl, J., Adey, B.T., Heitzler, M., Iosifescu, I., Hurni, L.
Basis of design and numerical modeling of offshore wind turbinesFranco Bontempi
Offshore wind turbines are relatively complex structural and mechanical systems located in a
highly demanding environment. In the present paper the fundamental aspects and the major issues related
to the design of these special structures are outlined. Particularly, a systemic approach is proposed for a
global design of such structures, in order to handle coherently their different parts: the decomposition of
these structural systems, the required performance and the acting loads are all considered under this
philosophy. According to this strategy, a proper numerical modeling requires the adoption of a suitable
technique in order to organize the qualitative and quantitative assessments in various sub-problems, which
can be solved by means of sub-models at different levels of detail, for both structural behavior and loads
simulation. Specifically, numerical models are developed to assess the safety performances under
aerodynamic and hydrodynamic actions. In order to face the problems of the actual design of a wind farm
in the Mediterranean Sea, in this paper, three schemes of turbines support structures have been considered
and compared: the mono pile, the tripod and the jacket support structure typologies.
Evaluation of the constructive state of conservation of historical structures...IJERA Editor
The conservation status assessment of historical traditional architecture on extended range increasingly requires analysis tools, which allow to synthesize and process parameters of interest for the formulation of an evaluation on their state of conservation. An appropriate prevention strategy development of, based on the loss risk assessment, seems the most appropriate way to address the management problem of similar structures. This approach requires simplified analysis tools, which allow to synthesize and process parameters of interest for the formulation of a current state evaluation of these structures, that can ensure, in a coordinated manner, an immediate conservation status assessment. This paper shows the first results of use of a protocol named ANVIV which allows acquisition and interpolation of constructive and decay information for masonry buildings with different geometric configuration in plan and elevation. It has been developed as part of a research project, and is able to quickly show the physical conservation state of these buildings, both locally and globally, highlighting critical issues and planning appropriate intervention programs
Ph.D. Thesis project of Paolo E. Sebastiani PBEE - Mala Rijeka ViaductFranco Bontempi
The case study bridge "Mala Rijeka" is one of the most important bridges on the Belgrade - Bar International Line. The bridge was built in 1973 as the highest railway bridge in the World (Worlds Record Lists) and it is a continuous fivespan steel frame carried by six piers of which the middle ones have heights ranging from 50 to 137.5 m measured from the foundation interface. The main steel truss bridge structure consists in a continuous girder with a total length L=498.80 m. Static truss height is 12.50 m, and the main beams are not parallel, but are radially spread, in order to adjust to the route line.
Performance-based earthquake engineering (PBEE) consists of the evaluation, design and construction of structures to meet seismic performance objectives (expressed in terms of repair costs, downtime, and casualties) that are specified by stakeholders (owners, society, etc.).
It is based on the premise that performance can be predicted and evaluated with quantifiable confidence to make, together with the client, intelligent and informed trade-offs based on life-cycle considerations rather than
construction costs alone.
Building occupants’ comfort assessment in the PBWE frameworkFranco Bontempi
This research deals with the problem of the comfort assessment of high-rise building occupants under wind
action. Also if the problem has been studied by the researchers and by the civil engineering industry during last thirty years, appropriate methods to handling the design of high-rise buildings in order to avoid wind-induced occupant discomfort has not been defined yet, mainly due to the high uncertainties involved in the determination of both the demand and the sensitivity of the building occupants to wind-induced vibrations. The main issues related with this problem are first summarized, then the growing, pioneering performance-based wind engineering (PBWE) approach is proposed as tool to handle the problem. The required analyses are presented and discussed on both the conceptual and operational point of view. A case-study is then presented in order to demonstrate the effectiveness of the proposed approach. In the PBWE view, the contribution of the work is focused on the procedural step identified as “damage analysis”, something that, in authors’ knowledge, has not been yet developed in the literature.
Structural robustness analysis of RC frames under seismic and blast chained l...Franco Bontempi
In this paper the structural robustness assessment of concrete frame buildings under blast and under earthquake blast hazard chain scenarios is investigated. A deterministic methodology for connecting
the robustness with the blast hazard intensity and for conducting the robustness analysis under earthquake-triggered blast is presented and applied to a 3D RC frame building by implementing nonlinear time history analyses considering both plastic behavior and large displacements.
A preliminary sensitivity analysis on a 2D frame is conducted to identify the critical analysis
parameters influencing the results. The robustness curves (residual structural capacity versus the level of damage occurring in the structure), evaluated both for the blast-only and for the earthquake-blast chained cases, are compared by considering different explosion locations inside the building (location of the blast-induced structural damage). Results show that neglecting the chained load scenarios would lead to the identification of an erroneous location as critical for the
structural robustness performance.
Sustainability Concepts in the Design of High-Rise buildings: the case of Dia...StroNGER2012
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
Sustainability Concepts in the Design of High-Rise buildings: the case of Dia...Franco Bontempi
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
Assessment of risk on road projects in nigeria construction industryResearchWap
The aim of this research is to examine the impact of risk on road projects in Nigerian construction industry. The specific objectives are to;
i. Identify and assess the various risk factors associated with road project in Nigerian construction industry.
ii. Determine the effect of risk factors on cost of road project in the study area.
iii. Determine the effect of risk factors on completion time of road project in the study area.
Multi-level structural modeling of an offshore wind turbineFranco Bontempi
Offshore wind turbines are complex structural and mechanical systems located in a highly
demanding environment. This paper proposes a multi-level system approach for studying the structural
behavior of the support structure of an offshore wind turbine. In accordance with this approach, a proper
numerical modeling requires the adoption of a suitable technique in order to organize the qualitative and
quantitative assessment in various sub-problems, which can be solved by means of sub-models at different
levels of detail, both for the structural behavior and for the simulation of loads. Consequently, in a first
place, the effects on the structural response induced by the uncertainty of the parameters used to describe
the environmental actions and the finite element model of the structure are inquired. After that, a mesolevel
FEM model of the blade is adopted in order to obtain the detailed load stress on the blade/hub
connection.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
More Related Content
Similar to “Performance-Based Hurricane Engineering (PBHE) framework”. Structural Safety, 45, 24-35. DOI: 10.1016/j.strusafe.2013.07.002
Guidelines for Design of Protective Structures Subjected To Unconfined Explos...IRJESJOURNAL
ABSTRACT:- In recent times, terrorist attacks are happening at major locations that pose significant threat to human life and infrastructure. The terrorist attack, especially the bomb explosion, causes catastrophic damage on structures, leading to loss of life and damage to assets. Thus, protection of structures against such extreme events or loading conditions is of prime importance. The loss of life and damage of the structure can be minimized by implementing suitable mitigation measures in both structural and non-structural design. The objective of this paper is to discuss on the guidelines for analysis and design of structural components of protective structures against blast pressure for an unconfined explosion. This paper covers in detail about the protection categories, risk assessment, Level of protection and damage, blast phenomenon and methods to predicting blast pressure, dynamic analysis, design and detailing
Multi-Hazard Assessment of Bridges in Case of Hazard Chain: State of Play and...Franco Bontempi
This study focuses on multi-hazard analysis for bridges, following a two-tier approach.
First, it identifies relevant open issues and recent literature developments in the field, presenting data in a meaningful manner, with specific focus on the issues related with the analysis of hazard chain scenario treated as low probability–high consequence events.
Second, it describes a practically useful and sufficiently generic approach for efficient computational investigation of hazard chain scenarios in highway bridges.
Following that, the applicability of the approach is exemplified in an appealing and commonly encountered in real-life hazard chain scenario, in which a multilevel modeling strategy is adopted to assess the structural response under hazard chain scenarios of a highway viaduct. Among the considered scenarios is the impact of a heavy vehicle (tank truck) on the bridge pier, and the fire spread following the collision due to the
presence of inflammable materials. The bridge structure is a typical 189-m-long multispan composite highway viaduct. The impact is modeled with a non-linear transient dynamic analysis that accounts the inertial effect of the global structure, while the
fire modeling is performed with non-linear quasi static dynamic analysis focusing on local behavior with a substructured model. Then different impact and fire scenarios are considered, including different impact velocities of the truck.
An overarching process to evaluate risks associated with infrastructure netwo...Infra Risk
International Conference Analysis and Management of Changing Risks for Natural Hazards. November 18-19, 2014, Padua, Italy.
‘An overarching process to evaluate risks associated with infrastructure networks due to natural hazards’ (extended abstract)
Hackl, J., Adey, B.T., Heitzler, M., Iosifescu, I., Hurni, L.
Basis of design and numerical modeling of offshore wind turbinesFranco Bontempi
Offshore wind turbines are relatively complex structural and mechanical systems located in a
highly demanding environment. In the present paper the fundamental aspects and the major issues related
to the design of these special structures are outlined. Particularly, a systemic approach is proposed for a
global design of such structures, in order to handle coherently their different parts: the decomposition of
these structural systems, the required performance and the acting loads are all considered under this
philosophy. According to this strategy, a proper numerical modeling requires the adoption of a suitable
technique in order to organize the qualitative and quantitative assessments in various sub-problems, which
can be solved by means of sub-models at different levels of detail, for both structural behavior and loads
simulation. Specifically, numerical models are developed to assess the safety performances under
aerodynamic and hydrodynamic actions. In order to face the problems of the actual design of a wind farm
in the Mediterranean Sea, in this paper, three schemes of turbines support structures have been considered
and compared: the mono pile, the tripod and the jacket support structure typologies.
Evaluation of the constructive state of conservation of historical structures...IJERA Editor
The conservation status assessment of historical traditional architecture on extended range increasingly requires analysis tools, which allow to synthesize and process parameters of interest for the formulation of an evaluation on their state of conservation. An appropriate prevention strategy development of, based on the loss risk assessment, seems the most appropriate way to address the management problem of similar structures. This approach requires simplified analysis tools, which allow to synthesize and process parameters of interest for the formulation of a current state evaluation of these structures, that can ensure, in a coordinated manner, an immediate conservation status assessment. This paper shows the first results of use of a protocol named ANVIV which allows acquisition and interpolation of constructive and decay information for masonry buildings with different geometric configuration in plan and elevation. It has been developed as part of a research project, and is able to quickly show the physical conservation state of these buildings, both locally and globally, highlighting critical issues and planning appropriate intervention programs
Ph.D. Thesis project of Paolo E. Sebastiani PBEE - Mala Rijeka ViaductFranco Bontempi
The case study bridge "Mala Rijeka" is one of the most important bridges on the Belgrade - Bar International Line. The bridge was built in 1973 as the highest railway bridge in the World (Worlds Record Lists) and it is a continuous fivespan steel frame carried by six piers of which the middle ones have heights ranging from 50 to 137.5 m measured from the foundation interface. The main steel truss bridge structure consists in a continuous girder with a total length L=498.80 m. Static truss height is 12.50 m, and the main beams are not parallel, but are radially spread, in order to adjust to the route line.
Performance-based earthquake engineering (PBEE) consists of the evaluation, design and construction of structures to meet seismic performance objectives (expressed in terms of repair costs, downtime, and casualties) that are specified by stakeholders (owners, society, etc.).
It is based on the premise that performance can be predicted and evaluated with quantifiable confidence to make, together with the client, intelligent and informed trade-offs based on life-cycle considerations rather than
construction costs alone.
Building occupants’ comfort assessment in the PBWE frameworkFranco Bontempi
This research deals with the problem of the comfort assessment of high-rise building occupants under wind
action. Also if the problem has been studied by the researchers and by the civil engineering industry during last thirty years, appropriate methods to handling the design of high-rise buildings in order to avoid wind-induced occupant discomfort has not been defined yet, mainly due to the high uncertainties involved in the determination of both the demand and the sensitivity of the building occupants to wind-induced vibrations. The main issues related with this problem are first summarized, then the growing, pioneering performance-based wind engineering (PBWE) approach is proposed as tool to handle the problem. The required analyses are presented and discussed on both the conceptual and operational point of view. A case-study is then presented in order to demonstrate the effectiveness of the proposed approach. In the PBWE view, the contribution of the work is focused on the procedural step identified as “damage analysis”, something that, in authors’ knowledge, has not been yet developed in the literature.
Structural robustness analysis of RC frames under seismic and blast chained l...Franco Bontempi
In this paper the structural robustness assessment of concrete frame buildings under blast and under earthquake blast hazard chain scenarios is investigated. A deterministic methodology for connecting
the robustness with the blast hazard intensity and for conducting the robustness analysis under earthquake-triggered blast is presented and applied to a 3D RC frame building by implementing nonlinear time history analyses considering both plastic behavior and large displacements.
A preliminary sensitivity analysis on a 2D frame is conducted to identify the critical analysis
parameters influencing the results. The robustness curves (residual structural capacity versus the level of damage occurring in the structure), evaluated both for the blast-only and for the earthquake-blast chained cases, are compared by considering different explosion locations inside the building (location of the blast-induced structural damage). Results show that neglecting the chained load scenarios would lead to the identification of an erroneous location as critical for the
structural robustness performance.
Sustainability Concepts in the Design of High-Rise buildings: the case of Dia...StroNGER2012
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
Sustainability Concepts in the Design of High-Rise buildings: the case of Dia...Franco Bontempi
One of the evocative structural design solutions for sustainable tall buildings is embraced by the diagrid (diagonal grid) structural scheme. Diagrid, with a perimeter structural configuration characterized by a narrow grid of diagonal members involved both in gravity and in lateral load resistance, has emerged as a new design trend for tall-shaped complex structures, and is becoming increasingly popular due to aesthetics and structural performance. Since it requires less structural steel than a conventional steel frame, it provides for a more sustainable structure. This study focuses on the structural performance of a steel tall building, using FEM nonlinear analyses. Numerical comparisons between a traditional outrigger system and different diagrid configurations (with three different diagrid inclinations) are presented for a building of 40 stories, with a total height of 160m, and a footprint of 36m x 36m. The sustainability of the building (in terms of structural steel weight saving) is assessed, together with the structural behavior.
Assessment of risk on road projects in nigeria construction industryResearchWap
The aim of this research is to examine the impact of risk on road projects in Nigerian construction industry. The specific objectives are to;
i. Identify and assess the various risk factors associated with road project in Nigerian construction industry.
ii. Determine the effect of risk factors on cost of road project in the study area.
iii. Determine the effect of risk factors on completion time of road project in the study area.
Multi-level structural modeling of an offshore wind turbineFranco Bontempi
Offshore wind turbines are complex structural and mechanical systems located in a highly
demanding environment. This paper proposes a multi-level system approach for studying the structural
behavior of the support structure of an offshore wind turbine. In accordance with this approach, a proper
numerical modeling requires the adoption of a suitable technique in order to organize the qualitative and
quantitative assessment in various sub-problems, which can be solved by means of sub-models at different
levels of detail, both for the structural behavior and for the simulation of loads. Consequently, in a first
place, the effects on the structural response induced by the uncertainty of the parameters used to describe
the environmental actions and the finite element model of the structure are inquired. After that, a mesolevel
FEM model of the blade is adopted in order to obtain the detailed load stress on the blade/hub
connection.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
1. Structural Safety 45 (2013) 24–35
Contents lists available at ScienceDirect
Structural Safety
journal homepage: www.elsevier.com/locate/strusafe
Performance-Based Hurricane Engineering (PBHE) framework
Michele Barbatoa,* , Francesco Petrinib , Vipin U. Unnikrishnana , Marcello Ciampolib
a
b
Louisiana State University and A&M College, Civil & Env. Eng. Dept., 3418 PFTH, Baton Rouge, LA 70803, USA
Sapienza University of Rome, Struct. & Geotech. Eng. Dept., via Eudossiana 18, Rome 00184, Italy
a r t i c l e
i n f o
Article history:
Received 20 November 2012
Received in revised form 23 May 2013
Accepted 17 July 2013
Keywords:
Performance-Based Engineering
Hurricane engineering
Multiple hazards
Windborne debris
Hurricane wind
Residential buildings
a b s t r a c t
This paper presents an innovative fully-probabilistic Performance-Based Hurricane Engineering (PBHE)
framework for risk assessment of structural systems located in hurricane-prone regions. The proposed
methodology is based on the total probability theorem and disaggregates the risk assessment into elementary
components, namely hazard analysis, structural characterization, environment–structure interaction analysis, structural analysis, damage analysis, and loss analysis. This methodology accounts for the multi-hazard
nature of hurricane events by considering both the separate effects of and the interaction among hurricane
wind, flood, windborne debris, and rainfall hazards. A discussion on the different sources of hazard is provided, and vectors of intensity measures for hazard analyses are proposed. Suggestions on the selection of
appropriate parameters describing the interaction between the environmental actions and the structure, the
structural response, and the resulting damage are also provided. The proposed PBHE framework is illustrated
through an application example consisting of the performance assessment of a residential building subjected
to windborne debris and hurricane strong winds. The PBHE framework introduced in this paper represents
a step toward a rational methodology for probabilistic risk assessment and design of structures subjected to
multi-hazard scenarios.
c 2013 Elsevier Ltd. All rights reserved.
1. Introduction
Performance-Based Engineering (PBE) is a general methodology
that (1) defines the performance objectives for structural systems
during their design life, (2) provides criteria and methods for verifying the achievement of the performance objectives, and (3) offers
appropriate methodologies to improve the design of structural systems. In the last two decades, significant research efforts have been
devoted to the development of PBE in earthquake engineering [1,2],
and have led, e.g., to the Performance-Based Earthquake Engineering
(PBEE) framework implemented by the Pacific Earthquake Engineering Research (PEER) Center [2,3]. More recently, the civil engineering
community has shown significant interest toward the possible development and extension of PBE to other subfields of structural engineering [4]. In particular, Performance-Based Blast Engineering has
received considerable attention in the US after the terrorist attacks
of September 11, 2001 [5]. Other PBE examples are PerformanceBased Fire Engineering [6], Performance-Based Tsunami Engineering
[7], and Performance-Based Wind Engineering (PBWE) [8,9]. In earthquake engineering, modern design codes have gradually substituted
prescriptive approaches with PBEE procedures for the design of new
facilities and the retrofit of existing ones [10,11]. PBEE has been shown
* Corresponding author. Tel.: +1 225 578 8719; fax: +1 225 578 4945.
E-mail addresses: mbarbato@lsu.edu (M. Barbato) francesco.petrini@uniroma1.it
(F. Petrini) vunnik1@lsu.edu (V.U. Unnikrishnan) marcello.ciampoli@uniroma1.it (M.
Ciampoli).
0167-4730/$ - see front matter c 2013 Elsevier Ltd. All rights reserved.
http://dx.doi.org/10.1016/j.strusafe.2013.07.002
to facilitate design and construction of structural systems based on a
realistic and reliable assessment of the risk associated with seismic
hazard, thus leading to a more efficient use of resources for construction, maintenance, and retrofit of structures [12,13].
The advantages demonstrated by a PBE approach to civil engineering provide a strong motivation to develop a PBE methodology
for structures subjected to hurricanes. The need for assessing and
improving the resilience of the built environment subjected to hurricane hazard is widely recognized. Some initial interest in PBE has
been expressed in hurricane engineering [14–16], but a complete and
rigorous framework is still needed.
The development of a Performance-Based Hurricane Engineering (PBHE) methodology presents several additional challenges when
compared to other existing PBE methodologies. In fact, while other
PBE methodologies focus on single hazards, the landfall of a hurricane
involves different hazard sources (wind, windborne debris, flood, and
rain) that interact to generate the hazard scenario for a given structure and to determine its global risk. Thus, hurricanes can be viewed,
and must be analyzed, as multi-hazard scenarios. In addition, monetary losses due to structural and non-structural damage assume more
relevance for hurricane events than for other types of hazard (e.g.,
earthquakes) for which no (or very short) warning is available. Therefore, for hurricane hazard, performance levels related to limitation
of the monetary losses due to damage may be required for a large
portion of existing or newly designed structures.
During the last decade, significant attention has been also devoted to multi-hazard scenarios [17–19]. Multi-hazard scenarios raise
2. M. Barbato et al. / Structural Safety 45 (2013) 24–35
non-trivial issues mainly related to the following three problems: (1)
modeling the interaction among concurrent sources of hazard; (2)
calibrating design values having comparable occurrence rates for different hazards; and (3) balancing the design in order to attain similar
safety levels with regard to multi-hazard scenarios implying hazards
that, if taken separately, would drive design solutions in different
(and even opposite) directions (e.g., increasing the elevation of the
structure as a safe guard against flood may result in increased wind
loads).
In this paper, the PBE approach is formally extended to develop
a fully-probabilistic PBHE methodology. The interaction among the
multiple hazards is discussed, and a scheme for representing the uncertainties from all pertinent sources and their propagation through a
probabilistic performance assessment analysis is proposed. Analytical
models of the relevant environmental phenomena generated by hurricane events are briefly described. The paper includes suggestions
for candidate parameters for the probabilistic characterization of: (1)
the interaction between the structure and the hazard sources; (2)
the structural response; (3) the resulting structural damage; and (4)
the consequences of the structural damage. The proposed approach is
illustrated through an application focused on the performance assessment of a residential building subjected to both wind and windborne
debris hazard.
2. Proposed PBHE framework
In a PBE approach, the structural risk is conventionally measured
by the probability of exceeding (within a given reference period usually taken as one year) a specified value of a decision variable, DV, corresponding to a target performance. Each DV is a measurable attribute
of a specific structural performance and can be defined in terms of
cost/benefit for the users and/or the society (e.g., loss of human lives,
economic losses, exceedance of safety/serviceability limit states). An
assessment based on PBE provides a probabilistic description of the
appropriate DV for different design choices in order to allow a rational
decision among different design options.
A PBE procedure for structures subject to hurricane hazard can
be decomposed into elementary phases that must be carried out in
sequence. Perhaps the most important expected feature of the procedure is the qualitative independence of each phase from the others
(i.e., the choice of the parameters that are characteristic for a given
phase is independent from the parameters adopted in the previous
phases). The PBHE framework proposed in this paper is based on the
total probability theorem, similar to the PEER PBEE and the PBWE
frameworks. The structural risk is defined in terms of a given DV as
follows
G (DV) =
G (DV DM) · f (DM EDP)
· f (EDP IM, IP, SP) · f (IP IM, SP) · f (IM)
· f (SP) · dDM · dEDP · dIP · dIM · dSP
(1)
where G(·) = complementary cumulative distribution function, and
G(·|·) = conditional complementary cumulative distribution function;
f(·) = probability density function, and f(·|·) = conditional probability
density function; DM = damage measure (i.e., a parameter describing
the physical damage to the structure); EDP = engineering demand parameter (i.e., a parameter describing the structural response for the
performance evaluation); IM = vector of intensity measures (i.e., the
parameters characterizing the environmental hazard); SP = vector
of structural parameters (i.e., the parameters describing the relevant
properties of the structural system and non-environmental actions);
and IP = vector of interaction parameters (i.e., the parameters describing the interaction phenomena between the environment and
the structure). In Eq. (1), IM and SP are assumed as uncorrelated and
independent of IP, while IP is dependent on both IM and SP. The extension to the case of vectors of DM and EDP is straightforward.
25
By means of Eq. (1), the problem of risk assessment is disaggregated into the following tasks (see Fig. 1): (1) hazard analysis,
(2) structural characterization, (3) interaction analysis, (4) structural
analysis, (5) damage analysis, and (6) loss analysis. Detailed explanation of steps (1), (4), (5), and (6) can be found in the PBEE literature
[2], while steps (2) and (3) have been introduced in PBWE to rigorously model the effects on the structural response of the interaction
between the structural system and the environment (e.g., the aerodynamic effects, see [20]). In particular, the probabilistic hazard analysis
phase (i.e., the probabilistic characterization of IM) can be performed
by using the (joint) probability density function f(IM). The IM should
be chosen as strictly independent on the investigated structure. Thus,
the probabilistic information about IM should be provided by meteorologists, climatologists, and other experts in atmospheric sciences,
while the engineers have the task of clarifying what information is
needed.
3. Characterization of uncertainties
The PBHE framework described in the previous section requires
the identification of the uncertainties that affect the structural performance and the evaluation of the interaction phenomena occurring
among the different hazards and the structure. It is noted here that uncertainties can be classified into two different categories, i.e., aleatoric
uncertainties, which are due to natural variability of physical, geometrical, and mechanical properties, and epistemic uncertainties, which
are due to lack of knowledge, imprecise modeling, and limited statistical information [21]. Aleatoric uncertainties are inherent in nature
and, thus, are virtually irreducible. On the contrary, epistemic uncertainties can and should be reduced as much as possible, e.g., by
implementing more accurate and realistic models. While epistemic
uncertainties can significantly affect the confidence on the end results
of the PBHE framework proposed in this study, their detailed study is
beyond the scope of this paper.
This paper focuses on the characterization of the hazard for a single
structure located in a hurricane-prone region. Three different zones
can be distinguished [20] (see Fig. 2):
1. The environment, i.e., the space surrounding the structure but sufficiently far from it, where the parameters describing the wind
field and the other hurricane-related environmental actions are
not influenced by the presence of the structure itself.
2. The exchange zone, i.e., the space immediately surrounding the
structure, where the structural configuration and the environmental action are strongly correlated, and the interaction between the
structure and the environmental agents, as well as the presence
of adjacent structures, cannot be disregarded.
3. The structural system, which includes the structure (characterized
by a set of uncertain parameters collected in a vector S) as well
as the non-environmental actions and/or elements that can modify the structural behaviour (characterized by a set of uncertain
parameters collected in a vector A).
Hereinafter, the uncertain basic parameters of interest describing the environmental actions in the environment are collected in
the vector IM; the uncertain basic parameters describing the structural system and non-environmental actions or devices applied to the
structure are collected in the vector SP; and the uncertain (usually
derived) parameters of interest in the exchange zone are collected in
the vector IP (Fig. 2). Examples of IP are the aerodynamic and hydrodynamic coefficients, as well as the parameters defining the impact
energy of windborne debris. The uncertain parameters IP describing
the exchange zone can be chosen so that they do not affect directly
the uncertain parameters characterizing both the environment (IM)
and the structural system (SP). Instead, uncertainty propagation from
the structural system and the environment to the exchange zone is
3. 26
M. Barbato et al. / Structural Safety 45 (2013) 24–35
Fig. 1. Probabilistic analysis components in the proposed PBHE framework.
Fig. 2. Identification of the uncertain parameters needed to describe the interaction between environment and structure in PBHE.
likely (e.g., the integrity of the building envelope affects the values of
the wind pressure acting on the building surfaces).
In Fig. 2, the different sources of uncertainties corresponding to
the environment, the structural system, and the exchange zone are
shown, and the different hazard sources and their interaction identified. The environmental hazard due to a hurricane event in a specified
geographic region is generated by the following four main sources of
hazard:
2. Water bodies (described by the uncertain vector F), which can
produce flood damage (flood hazard).
3. Sources of windborne debris (described by the uncertain vector D),
which can produce windborne debris damage (windborne debris
hazard).
4. Rainfall rates (described by the uncertain parameter vector RA),
which can induce flash flooding and direct damage to the interiors
of building when the building envelope has been breached (rainfall
hazard).
1. Hurricane strong winds (described by the uncertain vector W),
which can produce wind damage (wind hazard).
These various sources of hazard usually interact to produce the
actual hurricane hazard for a given structure. Typical examples are
4. M. Barbato et al. / Structural Safety 45 (2013) 24–35
the interaction between wind and waves in offshore sites, or the interaction between storm surge and wind in coastal regions. A set of
uncertain parameters included in vectors W, F, D, and RA must be
selected in order to describe the multiple hazards using IM. This set
must accurately describe all pertinent hazard sources and must be
as small as possible in order to be both “sufficient” and “efficient”
[22]. An analogous selection operation (for vectors A and S) is needed
to describe the structural behavior by SP. To derive the probabilistic
characterization of the hurricane actions on a structural system, the
proposed PBHE methodology also requires the identification of the
vector IP of the stochastic parameters describing the interaction between the environment and the structural system in the exchange
zone.
4. Multi-hazard characterization of hurricane events
Unlike other existing PBE engineering methodologies, in which
only a single hazard source is considered (e.g., PBEE and PBWE, which
consider earthquake and wind hazard only, respectively), the proposed PBHE framework innovatively accounts for concurrent and interacting hazard sources, i.e., storm surge and water bodies that can
cause flooding, windborne debris, rainfall, and strong winds. It also
accounts for the possible sequential effects of these distinct hazards.
The multi-hazard nature of the phenomena related to hurricanes and
their effects on the built environment can manifest in the following
three different modalities [23]:
1. Independent hazards, when different hazards affect the structure
independently. For example, windborne debris and flood hazard
can be considered as independent of each other because no mutual
interaction between the two hazards has the effect of modifying
the intensity of the corresponding actions. These hazards can occur
individually or simultaneously.
2. Interacting hazards, when the actions produced on a structure by
different hazards are interdependent (e.g., wind and windborne
debris hazards).
3. Hazard chains, when the effects of some hazards modify sequentially the effects of other hazards. For example, the actions on a
structure due to windborne debris can damage the structural envelope and increases the vulnerability of the structure to strong
winds.
In the proposed framework, the first two cases (i.e., independent
and interacting hazards) are treated within the hazard analysis, by
assuming proper interaction models between the hazards (e.g., by
using a proper joint probability distribution function to describe the
variability of the IM for different hazards [24,25]). The study of hazard chains requires modeling the structural system configuration and
properties as a function of the level of structural damage caused by
the different hazards. In particular, the presence of a hazard chain implies that the SP can change as a consequence of DM exceeding certain
thresholds. Thus, structural characterization, interaction analysis, and
structural analysis cannot be carried out without any information or
assumption on the values of DM. It is noteworthy that the proposed
probabilistic approach is consistent with the state-of-the-art in hurricane hazard and loss modeling, which can be identified with the
HAZUS® methodology [26].
However, the proposed PBHE framework presents the following
major differences when compared with the HAZUS methodology:
27
By contrast, the proposed PBHE framework is specifically developed to account for the characteristics of an individual building.
Thus, it has the potential to provide more accurate results.
2. HAZUS is not intended for use as a structural design tool. On
the contrary, the proposed PBHE framework is the first step toward a performance-based design methodology, which includes
the performance-based assessment procedure described in this
paper.
3. HAZUS approximates the multi-hazard nature of the hurricane
events as a simple superposition of various effects produced by
different sources of hazards, i.e., wind, windborne debris, flood
and rainfall. The proposed PBHE framework directly models the
multi-hazard nature of hurricanes by taking into account also the
effects due to the interaction between different hazard sources.
4. The proposed PBHE framework is significantly more flexible than
HAZUS, since it is based on the total probability theorem, which allows for independence of the different analysis components. This
property permits to take advantage of the state-of-the-art knowledge in the research subfields involved in the assessment and
design of structures located in hurricane prone regions, e.g., in
climatology, structural analysis, structural design, material technology, and loss analysis.
5. Performance expectations
In PBE, several performance expectation levels are defined based
on the severity of structural and non-structural damage and the corresponding losses (e.g., see [8,14,27]). Commonly, two main performance expectation levels with each level having different performance objectives are identified [8,20], i.e., a high level performance expectation (related to serviceability requirements) and a low
level performance expectation (related to structural safety and/or integrity). For the PBHE framework proposed in this paper, additional
considerations are needed to account for the fact that early warning of
the population is possible in case of hurricane hazard, in contrast with
other hazards (like the seismic hazard) for which warning is impossible or very limited. Thus, empty buildings during the hurricane transit
are not rare. In this situation, significant losses due to the damage to
non-structural components (e.g., building envelope, interiors of the
building) can occur without problems for people (because occupants
left the building) or for the structural integrity (because the structural parts do not suffer damages). In view of this consideration, an
additional intermediate performance level related to non-structural
damage is introduced.
The three performance expectation levels can be further subdivided in sub-levels or performance levels, e.g., the high performance
expectation level for a building can be related to occupant comfort (higher) and/or continued occupancy (lower). Moreover, different performance expectation levels need to be defined for different
structural typologies (e.g., buildings, bridges). A possible list of performance expectations for buildings and their short description are
provided in Table 1.
6. Description of the analysis steps
This section presents a brief description of the analysis steps of
the PBHE framework. Particular emphasis is given to the differences
between the PBHE framework and other existing PBE frameworks.
6.1. Hazard analysis
1. HAZUS is a GIS-based natural hazard assessment software used
for the regional risk and loss assessment of structures. Although it
is possible to use the HAZUS software for individual buildings, the
corresponding results can only estimate the average loss for the
class of buildings that are similar to the one under consideration.
The hazard analysis provides the probabilistic description of the
intensity measures IM. A comprehensive vector IM is obtained by
considering the components of the basic random parameter vectors
W, F, D, and RA that describe the different sources of hurricane hazard
5. 28
M. Barbato et al. / Structural Safety 45 (2013) 24–35
Table 1
Classification of building performance expectation for PBHE.
Category
Level
Description
Damage level
High: comfort and safety of occupants
Occupant comfort
No or little discomfort to the building
occupants
No threat to safety of building
occupants, small economic losses
No threat to safety of building
occupants, some economic losses
Safety of building occupants is
jeopardized, significant economic
losses
Structural integrity is jeopardized,
reduced safety
Visible signs of structural distress,
structure is not safe
No damage
Continued occupancy
Intermediate: damage to
non-structural elements
Limited damage to envelope/content
Extensive damage to envelope/content
Low: structural integrity
Structural damage
Extensive structural damage
(Fig. 2). It is noteworthy that, for a specific structure s and a specific
performance objective p, the elements of IM that do not represent a
relevant hazard for s and/or have small influence on p can be neglected
or treated as deterministic. The reduced vector IM(s,p) (i.e., the vector
IM specialized for the structure s and the performance p) can be used
more efficiently than the vector IM at a negligible loss of sufficiency.
For example, the flooding hazard can be neglected in the case of
structures that are sufficiently far from water bodies.
The selection of the IM components strictly depends on the choice
of the (usually deterministic) models used to describe the environmental phenomena related to the various hazards, as illustrated in
the available technical literature. In general, the key parameters of
these models are treated as stochastic variables. In this paper, the
IM components are identified by selecting state-of-the-art models for
hurricane-related environmental phenomena. While the selected IM
depend on the specific models, the approach proposed here to identify
IM is general and can also be applied to different hazard models.
6.1.1. Wind field and wind hazard characterization
A model of the wind field associated with a hurricane is needed to
characterize the wind hazard. The following three methodologies (of
increasing complexity) can be adopted to define the hurricane wind
field and the corresponding hazard [26]:
1. The statistical description of the gust wind velocity, V, at the structural location is directly derived from existing data by fitting a
proper probability distribution [28].
2. The site specific statistics of some fundamental hurricane parameters are obtained, and a Monte Carlo approach is used to sample these parameters from the statistical information. Using the
sampled values, a mathematical representation of the hurricane
is obtained, and the statistics of the parameters that describe the
hurricane actions are evaluated for the structure of interest at its
specific location [29].
3. The full track of the hurricane is modelled, from its initiation over
the ocean until final dissipation [30]. Several tracks are simulated.
The statistics of the parameters describing the hurricane actions
are estimated from the parameter values in each simulated track
for the structure of interest at its specific location.
The different methodologies provide different vectors IM. In particular, the first methodology gives W = V, while the other two
methodologies give [15]:
Minor exterior damage, no interior damage
Exterior damage, minor interior damage
Significant exterior and interior damage
Structural components and/or connections
are damaged
Loss of integrity of structural components,
significant reduction or loss of bearing load
capacity
central pressure deficit; B = Holland parameter [31]; H* = atmospheric boundary layer height; z0 = terrain roughness length; and
the superscript T denotes the matrix transpose operator.
6.1.2. Flood hazard characterization
The flood hazard due to the presence of water bodies surrounding the structure depends on the total water surface elevation with
respect to the mean surface, ηtot , and on the flooding water velocity,
Vwater (i.e., the value of the component of the water velocity orthogonal to the flooding barriers). These two parameters allow for the computation of the volumetric rate of flow and can be used as synthetic
indicators of the flood intensity. The basic parameters characterizing
these indicators can be selected as the components of F.
Three main natural phenomena cause water level increase and
contribute to flood hazard: the astronomical tide (ηtide ), the waves
(ηwave ), and the storm surge (ηsurge ). The total water surface elevation
is the sum of the three contributions at the same instant of time, i.e.,
ηtot = ηtide + ηwave + ηsurge . The flooding water velocity, Vwater , can
be assumed, as a first approximation, equal to the highest velocity
for each of the three considered phenomena (Vtide , Vwave , and Vsurge ,
respectively). Specific basic parameters subvectors can be defined for
each of the three contribution (i.e., Ftide , Fwave , Fsurge ), and the vector
F obtained as the union of the three subvectors.
The flood hazard due to the astronomical tide can be characterized
by the two random variables ηtide and Vtide , i.e., Ftide = [ηtide Vtide ]T .
The individual characterizations of the flood hazard due to waves and
storm surge require more detailed considerations. The water level,
ηwave , and the wave speed, Vwave , can be directly related to: the water depth, d; the wave height, H; the wave length, L; and the wave
period, T. The last three quantities can be obtained by propagating
in space and time [32] the waves corresponding to a given wave energy density spectrum (e.g., JONSWAP [33]) valid for the sea waves
as determined by the wind field (i.e., RMW, Vc , Δpc , and B), as well
as by other parameters [32]. A storm surge is defined as the water
surface response to wind-induced surface shear stress and pressure
fields. Storm surges can produce considerable short-term increases
in water level. Current storm surge models are based on the depthaveraged momentum and continuity equations for steady long waves
under the hypothesis of incompressible water [34].
Based on the existing literature, the following vector F is suggested
for a suitable flood hazard characterization
F = [RMW Vc
pc B H ∗ z0 ηtide Vtide d U curr zb ]T
(3)
(2)
where Ucurr = current velocity, and zb = sea bottom friction roughness.
where RMW = radius of maximum wind (defined as the radial distance between the storm center and the maximum wind location);
Vc = translational speed of the center of the storm; Δpc = hurricane
6.1.3. Windborne debris hazard characterization
The vector D of intensity measures for windborne debris hazard
describes the intensity of the wind field (needed to determine the
W = [RMW
Vc
pc
B
H∗
z0 ]T
6. M. Barbato et al. / Structural Safety 45 (2013) 24–35
impact wind speed), and the characteristics of the windborne debris
that could affect the structure. The additional parameters needed to
describe the debris are: the density of upwind buildings with respect
to the investigated structure, nbuildings ; the properties of the different
(potential) debris types, e.g., Md = mass per unit area of the debris,
CD,d = drag coefficient of the debris (and/or other parameters describing the debris flight characteristics), and Ad = reference area of the
debris; and the resistance model for the missile sources (which contributes to determine the number of windborne debris). The following
vector D is suggested in this study:
D = RMW Vc
pc B H ∗ z0 nbuildings Md C D,d Ad
T
(4)
6.1.4. Rainfall hazard characterization
The high rainfall rate associated with hurricane events can induce
significant damage to the interior of buildings when the building envelope has been breached [35]. To the best of the authors’ knowledge,
no analytical rainfall hazard model is available in the technical literature. However, several models based on the interpolation of statistical
data define the correlation between the rainfall rate and other fundamental hurricane parameters. One of the more widely accepted and
used models is the one implemented in HAZUS® [26,36], which is
valid for tropical cyclones. The estimates of rainfall rates resulting
from this model are employed in HAZUS® to evaluate the amount of
water that enters the buildings through broken windows and glass
doors, while they are not used to assess the risk associated with inland flash flooding. Consistently with HAZUS® , this study does not
consider inland flash flooding hazard. The proposed vector RA of basic
random parameters is given by
RA = [RMW
Vc
pc
B
H∗
z0
pc ]T
˙
(5)
˙
where p c is the first time derivative of the hurricane central pressure.
6.2. Structural characterization
The step of structural characterization in the PBHE framework
provides the probabilistic description of the components of SP, which
define the geometrical and/or mechanical properties of the structure that characterize its response to environmental and man-made
loading. Uncertainties affecting SP are well-known and have been
extensively investigated in the past decades for ordinary buildings
[37,38]. They are usually identified as the parameters determining
the structural resistance and stiffness [39]. However, parameters describing shape, size, and orientation of structural components can
also be considered, since they can affect the load acting on the structure. In addition to the above parameters, robustness, connectivity,
and redundancy are also critical in the analysis of wind-induced effects on structures. Robustness implies the property of a structure
not to respond disproportionately to either abnormal events or initial
local failure [40]. A general framework, based on the total probability theorem, was proposed in the literature to assess probabilistically
the robustness of systems subject to structural damage [41,42]. This
framework is consistent with the proposed PBHE framework, e.g., by
using as DV the robustness index [41]. However, the computation of
the robustness index for structures subjected to hurricane hazard requires significant research and implementation work, and is outside
the scope of this paper.
Particular attention is needed when a hazard chain is possible or
likely. The probabilistic description of SP (e.g., the first- and secondorder statistics, as well as the distribution type) needs to be expressed
as a function of the damage parameter DM. A typical example of
this situation occurs when the behavior of buildings subjected to
windborne debris hazard is considered [43]. If windows or doors break
due to windborne debris impact, the characteristics of the building
29
envelope (described by SP) vary, causing a change in the internal
pressure coefficients and in the loads acting on the structure [44].
6.3. Interaction analysis
The interaction parameters IP describe the physical interaction
between structure and environment, which influences the structural
response and performance, as well as the intensity and distributions
of the environmental actions as a result of the interaction between
the structure and the environment. Typical examples of IP are the
aerodynamic pressure coefficients and the aerodynamic derivatives
for dynamic wind actions, the rate of water flow impacting the structure for flooding actions, the kinetic energy and linear momentum of
the impacting missile for windborne debris, the wind pressure on the
internal and external building surfaces for wind actions on a building
envelope, and the rate of water intrusion in a building under strong
rain for rainfall action [45].
In other words, the IP are parameters that influence the intensity
of the environmental actions on the structure, and that depend simultaneously on IM and SP, as well as on their variability (e.g., the
aerodynamic derivatives of a bridge depend both on wind direction
and velocity, which are components of IM, and on structural damping,
which is a component of SP). In deterministic terms, this dependency
is described by a mechanistic model of the IP as functions of the IM
and SP (e.g., see Fig. 3(a)).
In a probabilistic analysis, the uncertainty of both IM and SP must
be taken into account in order to obtain the probability distributions
of IP, which can be derived by using probability distributions conditional to IM and SP. The propagation of uncertainties from IM and SP to
IP can be performed, e.g., by characterizing the IP via parametric probabilistic distributions whose parameters are deterministic functions
of IM and SP (see [9]). The conceptual separation of the interaction
analysis from others analysis steps carried out in PBE approaches is an
aspect of novelty of the proposed PBHE framework with respect to the
original PEER approach. This clear separation between independent
parameters (IM and SP) and derived parameters (IP) has also the merit
of highlighting the correct direction of uncertainty propagation.
Examples of interaction analysis in structural engineering subfields other than hurricane engineering are: soil–structure interaction
analysis in earthquake engineering, fluid–structure interaction analysis in offshore engineering and wind engineering, and heat-transfer
analysis in fire engineering.
6.4. Structural analysis and damage analysis
The structural analysis phase provides the probabilistic description of a proper EDP, which concisely represents the essential aspects
of the structural response for damage and performance evaluation.
Examples of EDP are: axial force, shear force, bending moment, and
stress state in structural and non-structural elements; response quantities describing the structural motion (deflections, velocities, and accelerations of selected points); structural deformation indices (e.g.,
interstory or global drift ratio and beam chord rotation).
The damage analysis provides the probabilistic description of DM
conditional to the values of EDP. The results of a probabilistic damage analysis are commonly expressed in terms of fragility curves as
shown in many recent applications in hurricane engineering [28,46–
48]. For example, for low-rise wood residential construction, the damage states of interest relate to those components that are essential to
maintain the integrity of the building envelope, i.e., roofs, windows,
and doors, since the building envelope is the residential construction component that is most vulnerable to hurricane-induced damage
[46].
In some applications, it is convenient to assume DM = EDP, e.g.,
in the case of low rise gable roof structures, in which the number
7. 30
M. Barbato et al. / Structural Safety 45 (2013) 24–35
Fig. 3. Different representations of fragility curves in case of interaction between two hazards: (a) relation between IP and IM, (b) fragility curve as a function of IP, and (c) fragility
curves as functions of IM.
of lost roof panels due to the uplift pressure generated by hurricane winds can be chosen as both DM and EDP. The hurricane wind
fragility is then expressed as the cumulative probability distribution
conditional to the uplift pressure (IP) or to the wind gust velocity (IM).
In case of hazard chains (e.g., if wind and windborne debris hazards
are considered), the representation of the fragility as the probability
of DM conditional to IM, namely P(DM|IM), can be used to assess the
effects of the interaction, e.g., based on the differences between the
functions P(DM|IM) obtained by considering undamaged or broken
windows (e.g., after a missile impact).
Fig. 3 shows two alternative representations of the fragility curve
for the roof panel uplift limit state, i.e., P(DM|IP) and P(DM|IM), in the
case of low-rise gable-roof buildings under the chain-effect of wind
and windborne debris hazards. In this example, the wind velocity
V is assumed as IM, the uplift pressure p is assumed as IP, and the
number of roof panels that are lost due to wind is assumed as DM.
The damage scenario corresponding to the loss of the first roof panel
(DM = 1) is considered. The relation between uplift pressure and
wind velocity (i.e., IP = IP(IM)) is different for the cases “broken” and
“unbroken” windows (see, e.g., ASCE standard as shown in Fig. 3(a)).
In fact, this relation must take into account the internal pressurization
of the building caused, e.g., by the failure of a door/window due to
windborne debris impact (i.e., the chain effect). The fragility curves
obtained from the technical literature in the form P(DM|IP) are the
same for the two case of “broken” or “unbroken” windows, since
they depend only on the properties of the roof panels (see Fig. 3(b)).
Two different IP values (identified in Fig. 3(a) and (b) as p1 broken and
p1 unbroken ) correspond to a given IM value (V1 in Fig. 3(a) and (c)).
Thus, two different fragility curves P(DM|IM) can be built for the two
cases of “broken” or “unbroken” windows, which highlight the effects
of considering the interaction between wind and windborne debris
hazard. In the case of vector IM and IP, the fragility can be represented
through appropriate fragility surfaces [49].
6.5. Loss analysis
The loss analysis step gives the estimate of the annual probability
of exceedance of DV, G(DV), where DV can be used as an indicator for
structural risk. Hurricanes are among the most costly natural hazards
to impact residential construction in the southeast coastal area of
the United States [46]; thus, DV is usually expressed in monetary
terms. It is noteworthy that, from a loss-based design perspective,
non-structural and structural damage are both losses; moreover, in
addition to direct losses, hurricanes can lead to social disruption for
extended periods of time, including the need to relocate building
inhabitants [25].
DV can be chosen as the repair cost related to the hurricane induced damage, or a percentage of the insured value, or the lifetime
cost of the structural system, evaluated by taking into account the
construction and maintenance costs, the repair costs after an event,
the economic losses due to damage (also to building contents), and
the loss of functionality [50]. Even in the simplest cases, repair costs
are highly uncertain, and updated data from insurance companies are
needed to obtain an appropriate probabilistic description of repair
costs.
In addition, both ethic and technical problems arise when the DV
is related to the loss of human life and/or to a life quality index for
the structure subjected to the hurricane. Further research is needed
to overcome the technical challenges related to the inclusion of these
aspects in evaluating the losses associated with the structural damages and failures due to the hurricanes. In addition, a constructive
dialogue is needed among different stakeholders to determine a consensus on when and how to consider life quality indices and costs
associated with loss of life into hurricane risk assessment.
8. M. Barbato et al. / Structural Safety 45 (2013) 24–35
31
Table 2
Probabilistic characterization of external and internal pressure coefficients.
Location/
condition
GCp
Roof (near
ridge)
Roof (away
from ridge)
Windward wall
Leeward wall
Side wall
GCpi
Enclosed
Breached
Mean
COV
Distribution
−0.855
0.12
Normal
−1.615
0.12
Normal
0.95
−0.76
−1.045
0.12
0.12
0.12
Normal
Normal
Normal
0.15
0.46
0.33
0.33
Normal
Normal
and windborne debris hazard. A study of sufficiency and efficiency of
different potential IM [22], albeit important, is out of the scope of this
study.
Among the wind occurrence models available in the literature
[46,52], the Weibull distribution is adopted here to describe the hurricane wind speed variability [28]. The two-parameter Weibull cumulative distribution function, F(V), is given by:
F (V ) = 1 − exp −
Fig. 4. Plan view of the benchmarck residential development.
7. Application example
The proposed PBHE framework is illustrated through the risk analysis for a building belonging to a hypothetical residential development, located near the coast in South Florida and composed by 30
identical concrete block gable roof structures (see Fig. 4). This application example seems sufficiently advanced to display some of the
specific critical issues of the PBHE framework, and highlights the importance of the interaction between different hazards in a hurricane
risk analysis. However, it is also simple enough to avoid the complexities of more realistic applications, thereby maintaining the focus of
this paper on the illustration of the PBHE framework.
The risk analysis is performed for the building identified as “Target” in Fig. 4. The interaction of wind and windborne debris hazards
is taken into account. Roof covers are considered as debris sources,
whereas the windows and glass doors are considered as debris impact
vulnerable components [51].
7.1. Hazard analysis and structural characterization
In the present study, the 3-second hurricane wind speed V
recorded at 10 m above the ground is used as the only component
of W for characterizing the wind hazard. For the sake of simplicity,
the wind direction variability has been neglected by assuming that
the maximum local winds generated by hurricanes act only in the
most unfavorable direction for windborne debris hazard (i.e., in the X
direction in Fig. 4).
For windborne debris hazard, the considered intensity measures
(IM) are: the wind speed, V; the debris area, Ad ; and the mass per unit
area of debris, Md . It is assumed that the buildings in the benchmark
residential development are the only windborne debris source affecting the target structure. Thus, the parameter nbuildings (i.e., the density
of upwind buildings with respect to the investigated structure) can
be excluded from the D vector. All windborne debris are assumed
of sheet type with flight characteristics described by deterministic
parameters. The choice of IM is based on damage analysis results
available in the literature, which show a strong correlation between
the selected parameters and the structural damage produced by wind
V
a
b
(6)
The two shape parameters a and b are site specific and are determined
by fitting the hurricane wind speed records provided by the National
Institute of Standards and Technology (NIST) to a Weibull distribution.
The NIST wind speed records contain data sets of simulated 1-minute
hurricane wind speeds at 10 m above the ground in an open terrain
near the coastline for locations ranging from milepost 150 (near Port
Isabel, TX) to milepost 2850 (near Portland, ME), spaced at 50 nautical
mile intervals (92,600 m). Considering South Florida as the location
for the case study, the dataset corresponding to milepost 1400 is used
for fitting the distribution. The 1-minute hurricane wind speed (V )
dataset is converted into 3-second wind speed as V = 1.77V [37,44].
The two parameter Weibull distribution function is fitted using the
converted wind speeds, and the parameters are a = 25.2447 m/s and
b = 1.6688, respectively. The area and mass per unit area of debris
are assumed to follow a uniform distribution in the range [0.108,
0.184] m2 and [10.97, 23.35] kg/m2 , respectively [27].
The considered structural parameters (SP) are: the wind pressure
exposure factor (evaluated at the height h of the roof of the target
building), Kh ; the external pressure coefficient, GCp ; and the internal
pressure coefficient, GCpi . The pressure coefficients include the effects
of the gust factor G. The topographic factor, Kzt , the wind directionality factor, Kd , are modeled as deterministic and assumed equal to
one; whereas the total vulnerable area on each side of each building
is assumed equal to 20% of the total wall area. The wind pressure
exposure factor Kh is assumed as normally distributed with a mean
value of 0.71 and a coefficient of variation (COV) of 0.19 [39]. The
characterization of the external and internal pressure coefficients is
given in Table 2 [46,52].
7.2. Interaction analysis
The choice of the interaction parameters (IP) is crucially dependent
on the performance levels of interest and the corresponding monitored responses of the structural and non-structural elements. The
main parameters controlling the effects of windborne debris impact
are the impact linear momentum, Ld , the impact kinetic energy, Ed ,
and the number of impacting debris, nd . It is known from the literature
that the impact linear momentum is well correlated with damage for
envelope components with a brittle behavior (e.g., doors, windows,
see [53,54]), whereas the impact kinetic energy is better correlated
9. 32
M. Barbato et al. / Structural Safety 45 (2013) 24–35
position), and is given by [51]
√
ud = V · 1 − exp − 2 · C · K · x
(8)
where x = g·X = dimensionless horizontal flight distance of the deV2
bris. The debris is assumed to hit the target building if the debris flight
distance is larger than the distance between the source and the target
building and, at the same time, the landing position falls within the
angle of hit (see Fig. 4).
Finally, the debris impact model uses the horizontal component of
the missile velocity (obtained from the debris trajectory model) and
data related to the missile size and mass (obtained from the debris
generation model) to compute the impact linear momentum of the
missile (i.e., the linear momentum corresponding to the windborne
debris velocity component orthogonal to the impacted surface, conditional to the event of at least one impact on windows). In this study,
the debris impact model gives the impact linear momentum as
L d = Md · Ad · ud
Fig. 5. Interaction analysis for windborne debris hazard.
with damage to envelope components with a ductile behavior (e.g.,
aluminum storm panels, see [48]). Hereinafter, it is assumed that the
glass windows and doors are unprotected and have a brittle behavior.
Based on this assumption, the IP selected in this study are: (1) the linear momentum of the debris at impact, Ld , for the windborne debris
hazard; and (2) the wind pressure acting on the walls and roof, pw ,
for the wind hazard.
The procedure proposed here for the interaction analysis corresponding to windborne debris hazard is summarized in the flowchart
shown in Fig. 5. The input of the interaction analysis for windborne
debris hazard is obtained from the hazard analysis and the structural
characterization steps. A debris generation model provides the number and type of windborne debris that can affect the structure under
consideration. The debris generation model used in this study is that
employed by the Florida Public Hurricane Loss Model (FPHLM), in
which the mean percentage of damage to roof covers is based on the
simulation results from a component-based pressure induced damage model, and is expressed as a function of the wind speed [27]. The
number of debris generated from each source house is calculated considering the percentage of roof cover damage at a given wind speed
and the geometry of the house [27,51].
The results of the debris generation model, derived according to
the geometry of the considered example case (i.e., density and relative position of debris sources with respect to the target structure),
are taken as input for the debris trajectory model [55–57]. The debris
trajectory model is used to assess if and at which impact velocity a
given windborne debris hits the building. In this study, the debris
trajectory model provides the landing position of the debris, which is
identified by the random variables X = along-wind flight distance and
Y = across-wind flight distance. The random variables are modeled
using a two-dimensional Gaussian distribution described by the following parameters: μX = mean along-wind flight distance; μY = mean
across-wind flight distance = 0 m; σ X = σ Y = 0.35μX = standard deviation of the along-wind and across-wind flight distances, respectively
[52]. The parameter μX is computed as:
μX =
2Md
1
˜
C · K ·T
·
ρa
2
2
˜
+ c1 · K · T
3
˜
+ c2 · K · T
where ρ a = 1.225 kg/m3 = air density; K =
4
˜
+ c3 · K · T
ρa ·V 2
2Md ·g
5
(7)
= Tachikawa num-
˜
ber; T = g·T = normalized time; g = gravity constant; T = flight time
V
in seconds; and C, c1 , c2 , and c3 = non-dimensional coefficients that
depend on the shape of the debris.
The flight time is assumed to follow a uniform distribution in the
interval [1, 2.5] s. For the sheet-type debris considered in this study,
C = 0.91, c1 = −0.148, c2 = 0.024, and c3 = −0.0014. The debris
horizontal velocity at impact, ud , is a function of the wind velocity
and the distance travelled by the debris (determined by its landing
(9)
The interaction analysis for the wind hazard provides the statistical characterization of the wind pressure, pw . For the sake of simplicity, in this study, the wind pressure is computed as
pw = qh · (G C p − G C pi )
(10)
where the wind velocity pressure at a quote h, qh , is given by
qh = 0.613 · K h · K zt · K d · V 2 · I
(11)
I = importance factor (assumed here equal to 1). In Eq. (11), V is
measured in m/s and qh is measured in N/m2 . It is noted here that
the simplified approach used in this study to perform the interaction
analysis for the wind hazard is appropriate for the simple and small
structures considered in the example application. However, larger
and more complex structures may require a more rigorous approach
based on the use of stochastic processes, random fields, and computational fluid dynamics to evaluate the wind effects on the structure.
7.3. Structural analysis and damage analysis
In this example application, the structural analysis step is not
needed explicitly because the engineering demand parameters (EDP)
can be assumed to coincide with the IP. The strengths of glass windows, glass doors, and roof (which are assumed to be the only components that can be damaged) are obtained from empirical relations
available in the literature and directly compared to the corresponding IP. Following a procedure commonly used in PBEE, the physical
damage conditions are represented using a limit state function g for
each damage limit state, i.e.,
g = DM − IP
(12)
where the demand measure (DM) corresponds to the limit state capacity for the given damage limit state. The damage limit states considered here are (1) the breaking of annealed glass windows/doors,
and (2) the uplift of the roof sheathings. The statistics of the damage
limit state capacities for different components and limit states are
provided in Table 3 [52,54].
7.4. Loss analysis
In this study, the decision variable (DV) is taken as the repair cost
of the building, RC, expressed as a percentage of the total cost of the
building. The complementary cumulative distribution of DV can be
used for informed risk-management decision [58] and is computed as
the convolution integral of the conditional probability of DV given DM
and the derivative of the complementary cumulative density function
of DM [4,59]. Since the repair costs associated with the different component limit states are not independent, the computation of G(DV)
10. M. Barbato et al. / Structural Safety 45 (2013) 24–35
33
Table 3
Statistics of limit state capacities.
Component
Limit state
Parameter
Mean (unit)
COV
Distribution
Roof
Windows
Windows
Uplift
Pressure
Impact
Rroof
RM
Rwindow
2762.7 (N/m2 )
4998.7 (N/m2 )
4.72 (kg m/s)
0.20
0.20
0.23
Normal
Normal
Lognormal
Table 4
Summary of parameters used in the risk assessment analysis.
Analysis step
Parameters
Symbol
Definition
Hazard analysis
IM
V
3-Second gust wind
speed
Area of debris
Mass of debris per
unit area
Wind pressure
exposure factor
External pressure
coefficient
Internal pressure
coefficient
Impact linear
momentum
Wind pressure on
the surface
Strength for
pressure (window)
Strength for uplift
(roof)
Strength for impact
(window)
Repair cost (% of
total cost)
Ad
Md
Structural
characterization
SP
Kh
GCp
GCpi
Interaction
analysis
IP
Ld
pw
Damage
analysis
DM
Rwindow
Rroof
RM
Loss analysis
DV
RC
requires the joint probability density function of the repair costs of all
component limit states, which is very difficult to obtain. To overcome
this difficulty, a very efficient multilayered Monte Carlo simulation
(MCS) approach is used in this study to estimate the loss hazard curve
[60]. The multilayered MCS approach is able to account for the uncertainty in the various parameters involved in the risk assessment
methodology (i.e., IM, IP, DM, and DV), which are summarized in Table
4.
The probabilistic hurricane loss analysis is performed for three different scenarios: (1) considering only the losses due to windborne debris hazard (the debris-only scenario); (2) considering only the losses
due to wind hazard (the wind-only scenario); and (3) considering the
losses due to windborne debris and wind hazards, and the effects
of their interaction (the interaction scenario). In the debris-only scenario, the repair cost is associated to the failure of a glass door or a
window due to the windborne debris impact (i.e., Ld ≥ RM ). No chain
reaction is considered, because the failure of a door or a window does
not affect the impact linear momentum of the other missiles. In the
wind-only scenario, the repair cost is associated to the failure of a
glass door and/or a window, as well as to the uplift of the roof due
to the wind pressure (i.e., pw ≥ Rwindow and/or pw ≥ Rroof ). In this
case, a chain reaction is possible because the failure of a glass door
or a window produces an internal pressurization of the building and
modifies the wind pressure acting on the other doors and windows
and on the roof (through the modification of the GCpi parameter from
enclosed to breached building, see Table 2). The interaction scenario
considers the failure of glass doors and windows due to both debris
impact and wind pressure, as well as the roof uplift due to the wind
pressure. In this case, two types of hazard chains are possible, corresponding to the internal pressurization of the building caused by
the failure of a door/window due to the windborne debris impact or
to the wind pressure. Thus, the two scenarios considering wind-only
and debris-only can be obtained as particular cases of the interaction
case by neglecting the wind pressure damage on the doors/windows
and roof for the debris-only scenario, and the damage on the doors/
windows due to windborne debris impact for the wind-only scenario.
Fig. 6 shows the flowchart of the multilayered MCS approach [60]
used for considering the interaction between wind and windborne
debris hazards. The number of hurricanes in each year is simulated
according to a Poisson random occurrence model with annual occurrence rate obtained from the NIST database. For each generated hurricane, a peak wind speed, V, is generated according to the Weibull
distribution. For each value of V, the value of the wind pressure on
the doors/windows and the roof is simulated using the pressure coefficients corresponding to the condition of enclosed buildings. The
linear momentum is also computed for each debris impact. If the
impact linear momentum and/or the wind pressure assume values
larger than the corresponding limit state capacity of the glass on any
of the four walls, the building envelope is considered to be breached
and the internal pressure is modified. The undamaged building components (doors/windows and roof) are checked for further damage
due to the modified pressure. A repair cost is then generated for each
damaged component according to an appropriate probability distribution. For the sake of simplicity, it is assumed that the repair cost
for the breakage of the windows on any side of the building or the
uplift of the roof can be represented by a lognormal random variable
with mean equal to 20% of the total cost of the building and COV
equal to 20%. The total repair cost for the single hurricane simulation
is equal to the sum of all the simulated component repair costs, with
a maximum value of 100% (total failure of the building). It is also assumed that the building is fully repaired after each hurricane event.
The single-year simulation is repeated a large number of times (in the
example, 10,000 samples are used) to estimate the annual probability
of exceedance (which coincides with the complementary cumulative
distribution function of DV) of the total repair cost.
The annual probabilities of exceedance of the repair cost for the
target building for the three different scenarios are shown in Fig. 7,
using a semi-logarithmic scale. A strong interaction is observed between the wind and the windborne debris hazards. This observation
suggests that the multi-hazard nature of hurricane must be taken into
account for accurate probabilistic loss analyses.
8. Conclusions
In this paper, a Performance-Based Hurricane Engineering (PBHE)
framework is proposed and illustrated. The methodology, that can be
used to evaluate the structural risk associated with facilities located
in hurricane-prone regions, is based on the total probability theorem
and builds on techniques already developed and used in other civil
engineering subfields. The problem of risk assessment is disaggregated into the following basic probabilistic components: (1) hazard
analysis, (2) structural characterization, (3) interaction analysis, (4)
structural analysis, (5) damage analysis, and (6) loss analysis. Each
of the analysis steps is briefly discussed in this paper. Particular emphasis is given to the differences between PBHE and other existing
performance-based engineering frameworks, e.g., the multi-hazard
nature of hurricane events, the presence of interacting hazard, and
the focus on high, intermediate, and low performance levels.
The feasibility of the proposed framework is demonstrated
through an application example consisting in the risk assessment
11. 34
M. Barbato et al. / Structural Safety 45 (2013) 24–35
Fig. 6. Multilayered MCS approach for probabilistic hurricane loss estimation.
Annual mean upcrossing rate
10
10
10
10
-2
-3
Debris-only scenario
Wind-only scenario
Interaction scenario
-4
-5
0
10
20
30
40
50
60
70
80
90
100
Repair cost (% of building cost)
Fig. 7. Annual probability of exceedance of repair cost for different hazard scenarios.
for a target building in a hypothetical residential development under
three different hazard scenarios. It is observed that the interaction
between wind and windborne debris hazard can affect significantly
the value of the annual probability of exceedance of repair cost. This
observation suggests the need to consider the multi-hazard nature of
hurricane events for accurate probabilistic loss analysis.
Acknowledgements
The authors gratefully acknowledge support by: (1) the Louisiana
Board of Regents through the Pilot Funding for New Research Program
under Award No. NSF(2008)-PFUND-86; (2) the LSU Council on Research through the 2009–2010 Faculty Research Grant Program; (3)
the Longwell’s Family Foundation through the Fund for Innovation in
Engineering Research (FIER) Program; and (4) the Italian Ministry for
Education, University and Research – MIUR, which partially financed
the Wi-POD Research Project (2008–2010). Fruitful discussions with
Dr. Sauro Manenti (University of Pavia) are gratefully acknowledged.
Any opinions, findings, conclusions or recommendations expressed
in this publication are those of the authors and do not necessarily
reflect the views of the sponsors.
References
[1] Ellingwood BR. Earthquake risk assessment of building structures. Reliab Eng
Syst Saf 2001;74:251–62.
[2] Porter KA. An overview of PEER’s performance-based earthquake engineering
methodology. In: Proceedings of the ninth international conference on applications of statistics and probability in civil engineering (ICASP9), 2003 July 6–9,
San Francisco, USA. Rotterdam: Millpress; 2003, pp. 973–80.
[3] Cornell CA, Krawinkler H. Progress and challenges in seismic performance assessment. PEER Center News 2000;3(2).
[4] Augusti G, Ciampoli M. Performance-based design in risk assessment and reduction. Probab Eng Mech 2008;23:496–508.
[5] Hamburger RO, Whittaker AS. Considerations in performance-based blast resistant design of steel structures. In: Proceedings of AISC-SINY symposium on
resisting blast and progressive collapse. Dec. 4–5, 2003, New York, USA. 2003.
[6] Lamont S, Rini D. Performance-based structural fire engineering for modern
building design. Struct Congr 2008:1–12.
[7] Riggs HR, Robertson IN, Cheung KF, Pawlak G, Young YL, Yim SCS. Experimental simulation of tsunami hazards to buildings and bridges. In: Proceedings of
the 2008 NSF engineering research and innovation conference. 2008 Jan 7–10,
Knoxville, USA. 2008.
[8] Petrini F. A probabilistic approach to Performance-Based Wind Engineering
(PBWE). [Ph.D. dissertation]. Rome, Italy: University of Rome “La Sapienza";
2009.
[9] Ciampoli M, Petrini F. Performance-based aeolian risk assessment and reduction
for tall buildings. Probab Eng Mech 2012;28:75–84.
[10] Applied Technology Council (ATC). NEHRP guidelines for the seismic rehabilitation of buildings. Final report. Report no.: FEMA 273. Washington, DC: Federal
Emergency Management Agency (US); 1997
12. M. Barbato et al. / Structural Safety 45 (2013) 24–35
[11] Applied Technology Council (ATC). Development of next-generation
performance-based seismic design procedures for new and existing buildings.
Report no.: ATC-58. Redwood City, CA: Applied Technology Council; 2005.
[12] Krishnan S, Ji C, Komatitsch D, Tromp J. Performance of two 18-Story steel
moment-frame buildings in Southern California during two large simulated San
Andreas earthquakes. Earthquake Spectra 2006;22:1035–61.
[13] Stojadinovic B, Mackie KR, Wong J-M. Seismic risk evaluation for the baseline
PEER bridge testbed. TCLEE 2009:1–12.
[14] Van de Lindt J, Dao T. Performance-based wind engineering for wood-frame
buildings. J Struct Eng 2009;135:169–77.
[15] Barbato M, Ciampoli M, Petrini F. A preliminary proposal for a probabilistic performance-based hurricane engineering framework. Struct Congr
2011:1618–29.
[16] Kareem A, McCullough MC. A framework for performance-based engineering in
multi-hazard coastal environments. Struct Congr 2011:1961–72.
[17] Wen YK. Minimum lifecycle cost design under multiple hazards. Reliab Eng Syst
Saf 2001;73:223–31.
[18] Whittaker AS, Hamburger RO, Mahoney M. Performance-based engineering of
buildings and infrastructure for extreme loadings. In: Proceedings of the AISCSINY symposium on resisting blast and progressive collapse, 2003 Dec 4–5, New
York, USA.
[19] Li Y, Ellingwood B. Framework for multihazard risk assessment and mitigation
for wood-frame residential construction. J Struct Eng 2009;135:159–68.
[20] Ciampoli M, Petrini F, Augusti G. Performance-based wind engineering: towards
a general procedure. Struct Saf 2011;33:367–78.
[21] Melchers RE. Structural reliability analysis and prediction. 2nd ed. John Wiley
and Sons; 2002.
[22] Luco N, Cornell CA. Structure-specific scalar intensity measures for near-source
and ordinary earthquake ground motions. Earthquake Spectra 2007;23:357–92.
[23] Petrini F, Palmeri A. Performance-based design of bridge structures subjected
to multiple hazards: a review. Bridge Maintenance, Safety, Management, Resilience and Sustainability. In: Proceedings of the sixth international conference on bridge maintenance, safety and management (IABMAS2012). 2012, pp.
2040–7.
[24] Toro GR, Resio DT, Divoky D, Niedoroda AW, Reed C. Efficient joint-probability
methods for hurricane surge frequency analysis. Ocean Eng 2010;37:125–34.
[25] Li Y, Van de Lindt J, Dao T, Bjarnadottir S, Ahuja A. Loss analysis for combined
wind and surge in hurricanes. Nat Hazard Rev 2012;13:1–10.
[26] Federal Emergency Management Administration (FEMA). Multi-hazard estimation methodology – hurricane model. Report No.: HAZUS-MH-MR4 technical
manual. Washington, DC: Federal Emergency Management Agency (US), Department of Homeland Security; 2007.
[27] Gurley K, Pinelli JP, Subramanian C, Cope A, Zhang L, Murphree J, et al. Florida
Public Hurricane Loss Projection Model (FPHLPM) engineering team final report, volume II: predicting the vulnerability of typical residential buildings to
hurricane damage. Miami, FL: Florida International University, International
Hurricane Research Center; 2005.
[28] Li Y. Fragility methodology for Performance-Based Engineering of wood-frame
residential construction. [Ph.D. dissertation]. Atlanta, GA: Georgia Institute of
Technology; 2005.
[29] Vickery P, Twisdale L. Wind-field and filling models for hurricane wind-speed
predictions. J Struct Eng 1995;121:1700–9.
[30] Jakobsen F, Madsen H. Comparison and further development of parametric
tropical cyclone models for storm surge modelling. J Wind Eng Ind Aerodyn
2004;92:375–91.
[31] Vickery PJ, Masters FJ, Powell MD, Wadhera D. Hurricane hazard modeling: the
past, present, and future. J Wind Eng Ind Aerodyn 2009;97:392–405.
[32] Dean RG, Dalrymple RA. Water wave mechanics for engineers and scientists:
advanced series on ocean engineering, vol. 2. New Jersey: World Scientific;
2004.
[33] Hasselmann K. Measurements of wind-wave growth and swell decay during the
Joint North Sea Wave Project (JONSWAP). Hamburg: Deutsches Hydrographisches Institut; 1973.
[34] Bode Hardy. Progress and recent developments in storm surge modeling. J Hydraul Eng 1997;123:315–31.
[35] Huang Z, Rosowsky DV, Sparks PR. Hurricane simulation techniques for the evaluation of wind-speeds and expected insurance losses. J Wind Eng Ind Aerodyn
2001;89:605–17.
35
[36] Vickery P, Lin J, Skerlj P, Twisdale L, Huang K. HAZUS-MH hurricane model
methodology. I: hurricane hazard, terrain, and wind load modeling. Nat Hazard
Rev 2006;7:82–93.
[37] Lungu D, Rackwitz R. Joint committee on structural safety – probabilistic
model code, part 2: loads. Available from: <http://www.jcss.byg.dtu.dk/upload/
subsites/jcss/publications/pmc/part ii. pd f >; 2001.
[38] Koh C, See L. Identification and uncertainty estimation of structural parameters.
J Eng Mech 1994;120:1219–36.
[39] Lee KH, Rosowsky DV. Fragility assessment for roof sheathing failure in high
wind regions. Eng Struct 2005;27:857–68.
[40] Arangio S. Reliability based approach for structural design and assessment:
performance criteria and indicators in current European codes and guidelines.
Int J Life Cycle Perform Eng 2012;1(1):64–91.
[41] Baker JW, Schubert M, Faber MH. On the assessment of robustness. Struct Saf
2008;30(3):253–67.
¨
[42] Izzuddin BA, Pereira M, Kuhlmann U, Rolle L, Vrouwenvelder T, Leira BJ. Application of probabilistic robustness framework: risk assessment of multi-storey
buildings under extreme loading. Struct Eng Int 2012;22(1):79–85.
[43] Pinelli JP, Gurley KR, Subramanian CS, Hamid SS, Pita GL. Validation of a probabilistic model for hurricane insurance loss projections in Florida. Reliab Eng Syst
Saf 2008;93:1896–905.
[44] American Society of Civil Engineers (ASCE). ASCE 7-10: minimum design loads
for buildings and other structures. Reston, VA: American Society of Civil Engineers; 2010.
[45] Dao T, Van de Lindt J. Loss analysis for wood frame buildings during hurricanes.
I: structure and hazard modeling. J Perform Constr Facil 2012;26(6):729–38.
[46] Li Y, Ellingwood BR. Hurricane damage to residential construction in the US: importance of uncertainty modeling in risk assessment. Eng Struct 2006;28:1009–
18.
[47] Shanmugam B. Probabilistic assessment of roof uplift capacities in low-rise
residential construction. [Ph.D. dissertation]. Clemson, SC: Clemson University;
2011.
[48] Herbin AH, Barbato M. Fragility curves for building envelope components subject to windborne debris impact. J Wind Eng Ind Aerodyn 2012;107–108:285–
98.
[49] Seyedi DM, Gehl P, Douglas J, Davenne L, Mezher N, Ghavamian S. Development of seismic fragility surfaces for reinforced concrete buildings by means of
nonlinear time–history analysis. Earthquake Eng Struct Dyn 2010;39:91–108.
[50] Bjarnadottir S, Li Y, Stewart MG. A probabilistic-based framework for impact
and adaptation assessment of climate change on hurricane damage risks and
costs. Struct Saf 2011;33:173–85.
[51] Lin N, Vanmarcke E. Windborne debris risk assessment. Probab Eng Mech
2008;23:523–30.
[52] Yau SC. Wind hazard risk assessment and management for structures. [Ph.D.
dissertation]. Princeton, NJ: Princeton University; 2011.
[53] National Association of Home Builders (NAHB) Research Center. Wind-borne
debris impact resistance of residential glazing. Final report: cooperative agreement H-21172CA. Washington, DC: US Department of Housing and Urban Development, Office of Policy Development and Research; 2002.
[54] Masters FJ, Gurley KR, Shah N, Fernandez G. The vulnerability of residential
window glass to lightweight windborne debris. Eng Struct 2010;32:911–21.
[55] Holmes JD. Trajectories of spheres in strong winds with application to windborne debris. J Wind Eng Ind Aerodyn 2004;92:9–22.
[56] Baker CJ. The debris flight equations. J Wind Eng Ind Aerodyn 2007;95:329–53.
[57] Lin N, Holmes J, Letchford C. Trajectories of wind-borne debris in horizontal
winds and applications to impact testing. J Struct Eng 2007;133:274–82.
[58] Mitrani-Reiser J, Haselton C, Goulet C, Porter K, Beck J, Deierlein G. Evaluation of
the seismic performance of a code-conforming reinforced-concrete frame building – part II: loss estimation. In: Proceedings of the 8th U.S. national conference
on earthquake engineering (NCEE), 2006 Apr 18–22, San Francisco, USA.
[59] Yang TY, Moehle JP, Stojadinovic B. Performance evaluation of innovative steel
braced frames: report No.: PEER 2009/103. Berkeley, CA: Pacific Earthquake
Engineering Research Center, University of California, Berkeley; 2009.
[60] Conte JP, Zhang Y. Performance based earthquake engineering: Application to
an actual bridge-foundation-ground system. In: Proceedings of the 12th Italian
national conference on earthquake engineering, Pisa, Italy, 2007.