Mauro Sergio da Silva has over 25 years of experience in the coatings industry. He holds an MBA in Project Management and has worked as a Development Chemist and Formulator for several major companies including PPG, BASF, and DuPont, where he was responsible for formulating materials for many automotive manufacturers. He has extensive experience with solvent-based basecoats, primers, and clearcoats, as well as analytical techniques, process development, quality control, and project management.
An innovative and enthusiastic Coating inspector having 14 years + of experience in
Coating industry of new ship building and ship repair projects. With the strong blasting and coating back ground, innovative thinking, leadership abilities, personnel drive-concentration in applications - confidant of achieving and contributing to corporate goals in time.
I have recently returned to Scotland after competing an assignment with GE Oil & Gas in USA.
I am looking for a new challenge or opportunity. I have a strong engineering and business development background and I have specialized in providing technical support to the sales teams on new and innovative product solutions. I have extensive experience developing commercial opportunities in UK and worldwide, in the downhole technology business development sector.
I have considerable experience in the design and manufacture in the oil service sector. My experience covers manufacture, design and post-sales support. My previous roles also involved technical sales duties such as presentations and customer visits.
In my previous roles I provided technical support to customers and the sales managers, which was instrumental in securing large orders. I supported and visited customers worldwide, and the customers varied from small service companies to major oilfield companies in North and South America, Europe, Russia, China and SE Asia. I developed long term respectful relationships with many manufacturers and therefore I have many contacts to develop business opportunities
I have developed many worldwide business contacts in the oil service sector with extensive and varied product knowledge.
I have been involved in various manufacturing projects in the GE Oil & Gas “Center of Excellence” in Houston. My duties involved bringing new products from development stage to achieving high value orders at the commercial level.
In addition, as I have previous experience in a design role, I can apply my knowledge and experience in various aspects, such as Engineering; Technology; post sales customer support; product quality assurance; Technical sales; field testing and bringing new products to commercial viability.
I also have experience in managing project engineering and large sales orders whilst working at Cameron Iron Works in Aberdeen, UK and I am accustomed to becoming expert on new products or systems applying self-motivation and my engineering background.
Please find my resume attached with relevant history
regards James Taylor
An innovative and enthusiastic Coating inspector having 14 years + of experience in
Coating industry of new ship building and ship repair projects. With the strong blasting and coating back ground, innovative thinking, leadership abilities, personnel drive-concentration in applications - confidant of achieving and contributing to corporate goals in time.
I have recently returned to Scotland after competing an assignment with GE Oil & Gas in USA.
I am looking for a new challenge or opportunity. I have a strong engineering and business development background and I have specialized in providing technical support to the sales teams on new and innovative product solutions. I have extensive experience developing commercial opportunities in UK and worldwide, in the downhole technology business development sector.
I have considerable experience in the design and manufacture in the oil service sector. My experience covers manufacture, design and post-sales support. My previous roles also involved technical sales duties such as presentations and customer visits.
In my previous roles I provided technical support to customers and the sales managers, which was instrumental in securing large orders. I supported and visited customers worldwide, and the customers varied from small service companies to major oilfield companies in North and South America, Europe, Russia, China and SE Asia. I developed long term respectful relationships with many manufacturers and therefore I have many contacts to develop business opportunities
I have developed many worldwide business contacts in the oil service sector with extensive and varied product knowledge.
I have been involved in various manufacturing projects in the GE Oil & Gas “Center of Excellence” in Houston. My duties involved bringing new products from development stage to achieving high value orders at the commercial level.
In addition, as I have previous experience in a design role, I can apply my knowledge and experience in various aspects, such as Engineering; Technology; post sales customer support; product quality assurance; Technical sales; field testing and bringing new products to commercial viability.
I also have experience in managing project engineering and large sales orders whilst working at Cameron Iron Works in Aberdeen, UK and I am accustomed to becoming expert on new products or systems applying self-motivation and my engineering background.
Please find my resume attached with relevant history
regards James Taylor
Extensive and global experience as Quality executive in the aeronautical industry, multicultural and international environment.
Permanently rolled-up sleeves as representative of a confident, focused and practical leader.
Ability to handle complex projects and interpersonal situations under time pressure and financial constraints.
Mechanical engineer with 13 years of experience in global products development, five in Automotive (Powertrain driveline AWD / 4x4 systems) and eight in Oil&Gas industry (Offshore umbilicals, onshore reinforced thermoplastic pipes and flexible tubing), Experience in quality improvements, cost reduction and new products development from basic design up to launch on the market. Umbilical project engineering and installation expert.
Skills: Product development, Design and release, Design Verification Plan, 6 Sigma Green Belt, Quality improvement, Cost Reduction, Automotive engineering specialist, AWD/4x4 Driveline systems, Powertrain, Subsea Umbilicals, RTP, flexible tubing, ISO-13628-5, API 17J, API 15S, Subsea Umbilical Design, Global Offshore and onshore installation processes, Solidworks 2015, AutoCAD 2017, SAE Baja.
Extensive and global experience as Quality executive in the aeronautical industry, multicultural and international environment.
Permanently rolled-up sleeves as representative of a confident, focused and practical leader.
Ability to handle complex projects and interpersonal situations under time pressure and financial constraints.
Mechanical engineer with 13 years of experience in global products development, five in Automotive (Powertrain driveline AWD / 4x4 systems) and eight in Oil&Gas industry (Offshore umbilicals, onshore reinforced thermoplastic pipes and flexible tubing), Experience in quality improvements, cost reduction and new products development from basic design up to launch on the market. Umbilical project engineering and installation expert.
Skills: Product development, Design and release, Design Verification Plan, 6 Sigma Green Belt, Quality improvement, Cost Reduction, Automotive engineering specialist, AWD/4x4 Driveline systems, Powertrain, Subsea Umbilicals, RTP, flexible tubing, ISO-13628-5, API 17J, API 15S, Subsea Umbilical Design, Global Offshore and onshore installation processes, Solidworks 2015, AutoCAD 2017, SAE Baja.
1. Mauro Sergio da Silva - Professional Resume
1
Silva, Mauro Sergio
Brazilian, +5511 975615792
mauro.s.silva@hotmail.com / mauro_s_silva@yahoo.com.br
Academic Background
MBA in Project Management at FGV Brazil (Scheduled for completion October, 2016)
Improvement in Science and Engineering Materials – Polymers - USP - SP - Brazil (2008)
MBA in Strategic Business Management at Oswaldo Cruz - SP - Brazil (2005)
Bachelor degree in Chemistry at Oswaldo Cruz – SP – Brazil (1999)
Chemical Technician at São Paulo Technical School (1991 to 1994)
Main Qualifications
Work as Formulator for OEM Coatings (Body and Bumper);
Good knowledge of analytical techniques;
Familiarity with ISO 9001, ISO 14001 and ISO TS;
High safety awareness level and implementing safety policy;
Prepare technical reports on studies carried out in the Laboratory;
Train and develop Laboratory Technicians on operation of new analytical equipment;
Large experience with Solvent Base Basecoat, Primer and Clearcoat (1K and 2K technologies);
Support to the customers at line;
Support to Manufacturing and Quality Control;
Support to Color Development;
Development of raw materials;
Leading process of FLC;
SAP System user;
Six Sigma - Green Belt Certification;
Large knowledge in Industrial Process and Chemical Process;
Good interpersonal skills inside and outside the company;
Performing DOE studies.
Professional Background
PPG (Feb/2011 to current)
Position: Development Chemist
Main Responsibilities:
• Responsible to formulate materials to the customers below:
NISSAN / FIAT / VW / APA / GM. Also responsible for give lab support at those lines.
• Large experience with Solvent Base Basecoat, Primer and Clearcoat (1K and 2K technologies);
• Support to Manufacturing and Quality Control;
• Root Cause Analysis;
• Support to Color Development;
• Development of raw materials;
• Performing DOE studies.
BASF (Nov/2008 to Jan/2011)
2. Mauro Sergio da Silva - Professional Resume
2
Position: Clearcoat Coordinator / Development Chemist
Main Responsibilities:
• Responsible to formulate materials to the customers below:
FIAT / VW / SCANIA / AYMESA / GM / Daimlerchrysler. Also responsible for give lab support for those
lines.
• Large experience with Solvent Base Basecoat, Primer and Clearcoat (1K and 2K technologies);
• Support to Manufacturing and Quality Control;
• Support to Color Development;
• Development of raw materials;
• Work with FCR;
• SAP user;
• Performing DOE studies.
DUPONT (Oct/1993 to Nov/2008)
Position: Development Chemist
Main Responsibilities:
• Responsible to formulate materials to the customers below:
HONDA Motorcycle; YAMAHA Motorcycle; TOYOTA / VW.
• Large experience with Solvent Base Basecoat, Primer and Clearcoat (1K and 2K technologies);
• Large experience with ABS, PP, NYLON, ASA polymers;
• Support to Manufacturing and Quality Control;
• Performing DOE studies;
• Development of coatings for ABS, PP, ASA;
• Support to Color Development;
• Development of raw materials;
• Work with FCR;
• SAP user;
• Performing DOE studies;
EMOPLAS – Flexible Packaging (Jan/1990 to Sep/1993)
Position: Printing machine operator
Main Responsibilities:
Operator of rotogravure machines
Operator Flexographic machines
Polyethylene of high and low density Analysis
Extrusion process control for LDPE / HDPE
Car makers visited to give support
NISSAN – Rio de Janeiro – Brazil
PLASCAR – Pindamonhangaba – Brazil
PLASTIC OMNIUM – Taubaté - Brazil
HONDA Motorcycle – Manaus – Brazil
YAMAHA Motorcycle – Manaus – Brazil
VW – São Paulo – Brazil
VW – Pacheco – Argentina
FIAT – Betim – Brazil
SCANIA – São Paulo – Brazil
GM – São Paulo – Brazil
3. Mauro Sergio da Silva - Professional Resume
3
GM – Porto Alegre – Brazil
GM – Quito – Ecuador
AYMESA – Quito – Ecuador
COZZUOL – Buenos Aires – Argentina
PSA – Buenos Aires – Argentina
RENAULT – Cordoba – Argentina
PPG Facilities Visited
San Juan del Rio – Mexico
Visiting to the development area and manufacturing area
Development of LBC Basecoats for Bumpers – NISSAN
Homologation of all color pallets for plastic parts – NISSAN
Monitoring the production of the first batch to provide to Brazil
Cleveland – USA
Visiting to the development area and manufacturing area
Training course in LBC formulation practices
Performing homologation tests to LBC Technology
Giving support to solve development issues
Oak Creek – USA
Visiting to the development area and manufacturing area
Training course in Adhesion Promoter for plastic parts
Languages
• Portuguese — Native Language
• English — Fluent
• Spanish — Advanced Knowledge