Larry May has over 40 years of experience in instrumentation and control engineering, working on projects involving chemical manufacturing processes, power plants, and waste treatment. He has designed and implemented multiple distributed control systems, replacing older systems, and is proficient in MicroStation and various Microsoft software.
Mark Austin has over 30 years of experience in electronics manufacturing, installation, and quality assurance. He has specialized experience in the manufacturing and testing of resist management systems and etch chambers for semiconductor customers. Most recently, he worked as a manufacturing and field support technician for Canon Nanotechnologies, where he supported resist management systems, worked closely with engineering, and was certified in shipping dangerous goods internationally.
Alexia Levite, LLC renovated an existing office building to house relocated county government administrative offices, printing facilities, and maintenance facilities. This included converting a parking garage into a mail room and shop, and designing a new printing facility. The renovation upgraded facilities to meet ADA, energy, and building code requirements by replacing mechanical systems, finishes, fire/sprinkler systems, and refurbishing elevators. Alexia Levite performed surveys of existing conditions, prepared drawings and reports, and worked with county representatives and officials on code and ADA compliance.
Robert Gerrish has over 40 years of experience in electrical engineering, including roles as Site Electrical Manager, Control Systems Manager, and Shift Manager at Cadbury UK. He has extensive experience managing electrical systems, control systems, IT infrastructure, and capital projects. He is proficient in PLCs, instrumentation, HV equipment, and software like Rockwell and Satchwell. Gerrish holds qualifications in electrical engineering, food hygiene, and health and safety management.
Pepe Ramnath is a licensed master electrician with over 20 years of experience in commercial and residential electrical work. He has worked as an electrician for several companies in Florida and New York, taking on both residential and commercial projects. Ramnath is knowledgeable in all areas of the national electrical code and excels at analyzing and solving problems. He is looking for work as an electrician in Orlando, FL.
This resume is for Rickie J. Bill, an electrical engineer with experience in research, design, development, testing, and installation of electrical equipment, components, and systems. He has over 20 years of experience in various engineering roles, including as an EE technician, technical manager, systems integrator, and test technician. He has competencies in areas like customer service, leadership, troubleshooting, and soldiering.
Charles Benoit has over 20 years of experience in HVAC installation, maintenance, and repair. He has worked for several companies in Louisiana providing heating, ventilation, air conditioning, and refrigeration services to both residential and commercial customers. Benoit has extensive expertise in equipment service, installation, troubleshooting, preventative maintenance, and customer service. He holds EPA and NATE certifications and keeps his skills up to date through ongoing professional development activities.
Khwaja S. Haque has over 30 years of experience in nuclear power plant I&C engineering. He has designed digital and analog upgrades for safety and non-safety systems at multiple plants. Currently, he provides I&C engineering support and has authored design change packages involving digital upgrades, procedure revisions, and component replacements and installations.
David M. Kalmes has over 20 years of experience in mechanical engineering, project management, and marketing. He holds a Bachelor's degree in Mechanical Engineering from Drexel University and an Associate's degree from Burlington County College. His career includes roles in marketing, project engineering, design engineering, and production management for companies in industries such as power generation, wastewater treatment, aerospace, and manufacturing.
Mark Austin has over 30 years of experience in electronics manufacturing, installation, and quality assurance. He has specialized experience in the manufacturing and testing of resist management systems and etch chambers for semiconductor customers. Most recently, he worked as a manufacturing and field support technician for Canon Nanotechnologies, where he supported resist management systems, worked closely with engineering, and was certified in shipping dangerous goods internationally.
Alexia Levite, LLC renovated an existing office building to house relocated county government administrative offices, printing facilities, and maintenance facilities. This included converting a parking garage into a mail room and shop, and designing a new printing facility. The renovation upgraded facilities to meet ADA, energy, and building code requirements by replacing mechanical systems, finishes, fire/sprinkler systems, and refurbishing elevators. Alexia Levite performed surveys of existing conditions, prepared drawings and reports, and worked with county representatives and officials on code and ADA compliance.
Robert Gerrish has over 40 years of experience in electrical engineering, including roles as Site Electrical Manager, Control Systems Manager, and Shift Manager at Cadbury UK. He has extensive experience managing electrical systems, control systems, IT infrastructure, and capital projects. He is proficient in PLCs, instrumentation, HV equipment, and software like Rockwell and Satchwell. Gerrish holds qualifications in electrical engineering, food hygiene, and health and safety management.
Pepe Ramnath is a licensed master electrician with over 20 years of experience in commercial and residential electrical work. He has worked as an electrician for several companies in Florida and New York, taking on both residential and commercial projects. Ramnath is knowledgeable in all areas of the national electrical code and excels at analyzing and solving problems. He is looking for work as an electrician in Orlando, FL.
This resume is for Rickie J. Bill, an electrical engineer with experience in research, design, development, testing, and installation of electrical equipment, components, and systems. He has over 20 years of experience in various engineering roles, including as an EE technician, technical manager, systems integrator, and test technician. He has competencies in areas like customer service, leadership, troubleshooting, and soldiering.
Charles Benoit has over 20 years of experience in HVAC installation, maintenance, and repair. He has worked for several companies in Louisiana providing heating, ventilation, air conditioning, and refrigeration services to both residential and commercial customers. Benoit has extensive expertise in equipment service, installation, troubleshooting, preventative maintenance, and customer service. He holds EPA and NATE certifications and keeps his skills up to date through ongoing professional development activities.
Khwaja S. Haque has over 30 years of experience in nuclear power plant I&C engineering. He has designed digital and analog upgrades for safety and non-safety systems at multiple plants. Currently, he provides I&C engineering support and has authored design change packages involving digital upgrades, procedure revisions, and component replacements and installations.
David M. Kalmes has over 20 years of experience in mechanical engineering, project management, and marketing. He holds a Bachelor's degree in Mechanical Engineering from Drexel University and an Associate's degree from Burlington County College. His career includes roles in marketing, project engineering, design engineering, and production management for companies in industries such as power generation, wastewater treatment, aerospace, and manufacturing.
Dennie R Parsons has over 40 years of experience in electrical engineering and control systems design. He holds a Bachelor of Science degree in Electrical Engineering Technology from Youngstown State University. Most recently, he worked as a consulting engineer and previously spent 27 years with DuPont, where he specialized in designing and maintaining computerized control systems for manufacturing facilities. He is interested in continuing his career focused on computerized control systems.
Albert Donald Freeland is an experienced Electrical Engineer with over 30 years of experience in the electric utility industry. He has held various leadership roles at Nashville Electric Service including Rates Supervisor, Distribution Planning Engineer, and System Planning Engineer. In these roles, he performed rate studies, cost of service studies, load forecasting, budgeting, and oversaw construction projects. Currently, he works as an independent contractor assisting with documentation and specifications for a customer information system.
Daniel deFluiter has over 30 years of experience in electronics, electrical systems, and computer maintenance and repair. He has worked as an electronics technician for United Space Alliance, maintaining airfield navigational aids and communications equipment. Prior to that, he worked as an independent cable technician and for Chrysler as an automotive design technician. He has associates degrees in computer technology and communications engineering from Brevard Community College.
Robert E. Hershberger has over 30 years of experience in production and test engineering, research, and product design. He has worked for companies such as TRW, Pyramid Technology, Echelon Corp, Oregon State University, and the University of Oregon. His skills include technical writing, existing and new product development, equipment specification, custom apparatus design, vendor management, manufacturing technologies, product reliability, training, and team meetings. He has proficiency in programming languages, test equipment, and software tools. He holds a Master of Science in Physics from the University of Oregon and a Bachelor of Science in Electronic Engineering from Cal Poly, San Luis Obispo. He has authored several peer-reviewed publications.
Robert C. Thompson has over 50 years of experience in IT, with expertise in technical writing, systems analysis, programming, and management. He has worked in a variety of industries including banking, insurance, manufacturing, and retail. His background provides strengths in understanding processes, documenting them clearly, and adding value to business environments.
Phillip L. Ursery has over 20 years of experience as an electrical and instrumentation engineer for Kimberly-Clark Corporation, working on both domestic and international projects. He has expertise in PLCs, drives, sensors, electrical systems, and more. Some of his responsibilities include specification writing, design, procurement, construction oversight, and safety reviews. He has delivered projects on time and under budget, such as saving $630,000 on a project in Georgia.
Jennifer Jackson seeks a position that utilizes her 22 years of experience in electronics and technical fields. She has a diverse background including experience maintaining test equipment, tracking repairs, and providing customer support. Her goal is to combine technical and interpersonal skills to advance her professional abilities.
Gordon N. Mayer is an experienced mechanical engineer and avionics technician seeking a new position. He has over 30 years of experience in electronics maintenance, mechanical engineering, system integration, and operations management. Most recently, he served as Maintenance Manager for Union Tank Car Company, where he oversaw a staff of over 25 personnel and $100M in assets. Prior to that, he spent 18 years as Senior Engineer and Task Order Leader for DCS Corporation, managing avionics integration projects with annual budgets over $2M. He has a B.S. in Mechanical Engineering and certifications in avionics maintenance.
Paul V. Arnold has over 35 years of experience in information technology, law enforcement, emergency medical services, and mining. He has held roles such as Chief Information Officer, Police Officer, Detective, EMT, and Network Engineer. He has education and certifications in various technical fields, law enforcement, fire safety, emergency medical services, and boating safety.
This document is a resume for Kim Roderick Huffman, an electrical engineer with over 35 years of experience designing power systems for various industries. It summarizes his roles as an electrical engineer and manager at several companies, where he designed electrical systems ranging from 120V to 35kV, including power distribution, lighting, controls, and motor systems. His experience includes projects in petroleum, power generation, cement plants, railcars, manufacturing, nuclear facilities, mining, and more. He holds a Bachelor's degree in Electrical/Electronic Engineering Technology.
This document provides a summary of Patrick T. Fitzgerald's experience and education. He has over 30 years of experience in automation, instrumentation, electrical and control systems for the petroleum and pipeline industries. Currently, he works as an automation commissioning consultant in Kazakhstan. Previously, he held various roles with Chevron, Chevron Oronite, Sunbelt Refining, All-American Pipeline Company, and Mid America Pipeline Company, where he supported DCS, PLC, and SCADA systems. He has an Associate's degree in Electronics Engineering Technology and has taken numerous training courses related to automation systems.
Michael Osvath is seeking a project management position utilizing over 25 years of experience in controls engineering, manufacturing engineering, and project engineering. He has extensive experience managing projects from start to completion, including bid development, scheduling, installation, and testing. Osvath is proficient in various automation and design software and has worked on numerous automation projects in the automotive industry.
Terence Anderson is an experienced electrical engineer and project manager with over 35 years of experience managing electrical projects and systems. He has extensive experience managing electrical operations and maintenance projects for the Department of Defense and Social Security Administration. Currently he is the Facility Transition and Warranty Manager for a large DOD data center. Previously he was the Lead Project Engineer for a $60 million telecommunications project after the 9/11 attack on the Pentagon. He holds an MBA and BS in Electrical Engineering.
Raymond "Ken" Gates has over 20 years of experience in instrument engineering including DCS systems, analyzers, problem solving, writing instrument specifications, organizational skills, project planning, control valve technology, vibration technology, and SAP. He has a BS in Industrial Engineering from the University of Houston and an AA in Applied Science from San Jacinto College. His professional accomplishments include converting boilers from one DCS system to another on a fast track project with limited space and reducing downtime on other projects. He has worked for various engineering companies as a senior or control system engineer on projects for Dow Chemical, BP, BASF, and others.
David A. Daraskevich is an experienced electrical and computer engineer with experience leading projects involving software development, integration, and system administration. He has 18 years of experience in roles such as ESB and Application Services Lead, Agile Administrator, Computer Technologist and Office Manager, and Senior Systems Analyst. Daraskevich also has a background in electronics, avionics, and electrical engineering with a B.S. in Electrical Engineering and B.A. in Computer Science.
The document provides a summary of Joshua Miller's qualifications and experience in electrical and mechanical maintenance and engineering over 20 years. He has extensive experience in maintenance, troubleshooting, and process improvement. His background includes roles as a maintenance lead, engineering technician, and installer and trainer of automated equipment.
The document is a resume for Armindo G. Fonseca. It summarizes his extensive experience over 35+ years in manufacturing, R&D, electronics, and technical roles. His background includes troubleshooting, design, documentation, project management, and training. His most recent role was as a Senior Production Tech/Senior R&D Tech at Medtronic Ablation Frontiers, where he developed, tested, and repaired cardiac ablation generators. He seeks a role as a Manufacturing or R&D Technician where he can apply his experience and skills.
Mel E. Loga II is an experienced senior electrical engineering student seeking a challenging position in engineering. He has a 3.2 GPA and 3.5 GPA in his major of electrical engineering from Louisiana State University. His experience includes electrical engineering internships programming PLCs and HMIs for water purification systems and configuring wiring schematics and motor protection relays. He also has experience as a technical manager, webmaster, and aviation electronics technician and quality assurance inspector in the US Navy, where he received several honors and awards.
This document provides a summary of Philip A. Schoenthal's work experience and qualifications. Schoenthal has over 25 years of experience working with electronic equipment, including experience maintaining and repairing systems for railcars, broadcast stations, medical devices, and more. He has extensive knowledge of electronic test equipment and holds several licenses related to radio operation.
Wayne McKelvey is seeking a position utilizing his experience in clean room operations and maintenance of semiconductor manufacturing equipment. He has over 30 years of experience in roles such as technician, engineer, and manager maintaining equipment for photo lithography, metrology, die bonding, and more. His background includes positions at various semiconductor and defense companies.
Dennie R Parsons has over 40 years of experience in electrical engineering and control systems design. He holds a Bachelor of Science degree in Electrical Engineering Technology from Youngstown State University. Most recently, he worked as a consulting engineer and previously spent 27 years with DuPont, where he specialized in designing and maintaining computerized control systems for manufacturing facilities. He is interested in continuing his career focused on computerized control systems.
Albert Donald Freeland is an experienced Electrical Engineer with over 30 years of experience in the electric utility industry. He has held various leadership roles at Nashville Electric Service including Rates Supervisor, Distribution Planning Engineer, and System Planning Engineer. In these roles, he performed rate studies, cost of service studies, load forecasting, budgeting, and oversaw construction projects. Currently, he works as an independent contractor assisting with documentation and specifications for a customer information system.
Daniel deFluiter has over 30 years of experience in electronics, electrical systems, and computer maintenance and repair. He has worked as an electronics technician for United Space Alliance, maintaining airfield navigational aids and communications equipment. Prior to that, he worked as an independent cable technician and for Chrysler as an automotive design technician. He has associates degrees in computer technology and communications engineering from Brevard Community College.
Robert E. Hershberger has over 30 years of experience in production and test engineering, research, and product design. He has worked for companies such as TRW, Pyramid Technology, Echelon Corp, Oregon State University, and the University of Oregon. His skills include technical writing, existing and new product development, equipment specification, custom apparatus design, vendor management, manufacturing technologies, product reliability, training, and team meetings. He has proficiency in programming languages, test equipment, and software tools. He holds a Master of Science in Physics from the University of Oregon and a Bachelor of Science in Electronic Engineering from Cal Poly, San Luis Obispo. He has authored several peer-reviewed publications.
Robert C. Thompson has over 50 years of experience in IT, with expertise in technical writing, systems analysis, programming, and management. He has worked in a variety of industries including banking, insurance, manufacturing, and retail. His background provides strengths in understanding processes, documenting them clearly, and adding value to business environments.
Phillip L. Ursery has over 20 years of experience as an electrical and instrumentation engineer for Kimberly-Clark Corporation, working on both domestic and international projects. He has expertise in PLCs, drives, sensors, electrical systems, and more. Some of his responsibilities include specification writing, design, procurement, construction oversight, and safety reviews. He has delivered projects on time and under budget, such as saving $630,000 on a project in Georgia.
Jennifer Jackson seeks a position that utilizes her 22 years of experience in electronics and technical fields. She has a diverse background including experience maintaining test equipment, tracking repairs, and providing customer support. Her goal is to combine technical and interpersonal skills to advance her professional abilities.
Gordon N. Mayer is an experienced mechanical engineer and avionics technician seeking a new position. He has over 30 years of experience in electronics maintenance, mechanical engineering, system integration, and operations management. Most recently, he served as Maintenance Manager for Union Tank Car Company, where he oversaw a staff of over 25 personnel and $100M in assets. Prior to that, he spent 18 years as Senior Engineer and Task Order Leader for DCS Corporation, managing avionics integration projects with annual budgets over $2M. He has a B.S. in Mechanical Engineering and certifications in avionics maintenance.
Paul V. Arnold has over 35 years of experience in information technology, law enforcement, emergency medical services, and mining. He has held roles such as Chief Information Officer, Police Officer, Detective, EMT, and Network Engineer. He has education and certifications in various technical fields, law enforcement, fire safety, emergency medical services, and boating safety.
This document is a resume for Kim Roderick Huffman, an electrical engineer with over 35 years of experience designing power systems for various industries. It summarizes his roles as an electrical engineer and manager at several companies, where he designed electrical systems ranging from 120V to 35kV, including power distribution, lighting, controls, and motor systems. His experience includes projects in petroleum, power generation, cement plants, railcars, manufacturing, nuclear facilities, mining, and more. He holds a Bachelor's degree in Electrical/Electronic Engineering Technology.
This document provides a summary of Patrick T. Fitzgerald's experience and education. He has over 30 years of experience in automation, instrumentation, electrical and control systems for the petroleum and pipeline industries. Currently, he works as an automation commissioning consultant in Kazakhstan. Previously, he held various roles with Chevron, Chevron Oronite, Sunbelt Refining, All-American Pipeline Company, and Mid America Pipeline Company, where he supported DCS, PLC, and SCADA systems. He has an Associate's degree in Electronics Engineering Technology and has taken numerous training courses related to automation systems.
Michael Osvath is seeking a project management position utilizing over 25 years of experience in controls engineering, manufacturing engineering, and project engineering. He has extensive experience managing projects from start to completion, including bid development, scheduling, installation, and testing. Osvath is proficient in various automation and design software and has worked on numerous automation projects in the automotive industry.
Terence Anderson is an experienced electrical engineer and project manager with over 35 years of experience managing electrical projects and systems. He has extensive experience managing electrical operations and maintenance projects for the Department of Defense and Social Security Administration. Currently he is the Facility Transition and Warranty Manager for a large DOD data center. Previously he was the Lead Project Engineer for a $60 million telecommunications project after the 9/11 attack on the Pentagon. He holds an MBA and BS in Electrical Engineering.
Raymond "Ken" Gates has over 20 years of experience in instrument engineering including DCS systems, analyzers, problem solving, writing instrument specifications, organizational skills, project planning, control valve technology, vibration technology, and SAP. He has a BS in Industrial Engineering from the University of Houston and an AA in Applied Science from San Jacinto College. His professional accomplishments include converting boilers from one DCS system to another on a fast track project with limited space and reducing downtime on other projects. He has worked for various engineering companies as a senior or control system engineer on projects for Dow Chemical, BP, BASF, and others.
David A. Daraskevich is an experienced electrical and computer engineer with experience leading projects involving software development, integration, and system administration. He has 18 years of experience in roles such as ESB and Application Services Lead, Agile Administrator, Computer Technologist and Office Manager, and Senior Systems Analyst. Daraskevich also has a background in electronics, avionics, and electrical engineering with a B.S. in Electrical Engineering and B.A. in Computer Science.
The document provides a summary of Joshua Miller's qualifications and experience in electrical and mechanical maintenance and engineering over 20 years. He has extensive experience in maintenance, troubleshooting, and process improvement. His background includes roles as a maintenance lead, engineering technician, and installer and trainer of automated equipment.
The document is a resume for Armindo G. Fonseca. It summarizes his extensive experience over 35+ years in manufacturing, R&D, electronics, and technical roles. His background includes troubleshooting, design, documentation, project management, and training. His most recent role was as a Senior Production Tech/Senior R&D Tech at Medtronic Ablation Frontiers, where he developed, tested, and repaired cardiac ablation generators. He seeks a role as a Manufacturing or R&D Technician where he can apply his experience and skills.
Mel E. Loga II is an experienced senior electrical engineering student seeking a challenging position in engineering. He has a 3.2 GPA and 3.5 GPA in his major of electrical engineering from Louisiana State University. His experience includes electrical engineering internships programming PLCs and HMIs for water purification systems and configuring wiring schematics and motor protection relays. He also has experience as a technical manager, webmaster, and aviation electronics technician and quality assurance inspector in the US Navy, where he received several honors and awards.
This document provides a summary of Philip A. Schoenthal's work experience and qualifications. Schoenthal has over 25 years of experience working with electronic equipment, including experience maintaining and repairing systems for railcars, broadcast stations, medical devices, and more. He has extensive knowledge of electronic test equipment and holds several licenses related to radio operation.
Wayne McKelvey is seeking a position utilizing his experience in clean room operations and maintenance of semiconductor manufacturing equipment. He has over 30 years of experience in roles such as technician, engineer, and manager maintaining equipment for photo lithography, metrology, die bonding, and more. His background includes positions at various semiconductor and defense companies.
1. Larry A. May 1979 Kirby Parkway Memphis, TN 38119 Ph. 901-288-5004
Email: larryamay@bellsouth.net
Summary
Instrumentation & Control Design Engineering
Electronic Systems Maintenance Engineering and Management
Summary Experience
Senior Principal Designer, E. I. Dupont, Inc., Memphis, TN Jan 2014 to Present. On
contract from Technical Staffing Associates, A KBR company. Instrumentation and Control
Design Engineering for chemical manufacturing processes. Designed installation of a Honeywell
Distributed Control System with installation in parallel with, then replacing, an existing
production unit Fisher DCS.
Site Services Engineer, Experitec, Inc. Brunswick, TN Jan 2013 to Jun 2013. On
contract to Arkema, Inc., Memphis, TN. Designed installation of a Fisher Delta-V Distributed
Control System with operation in parallel with, then replacing, an existing Fisher Provox DCS.
Senior Instrumentation and Control Engineer, E. I. Dupont, Inc., Memphis, TN Nov
2009 to Mar 2012. On contract from Aker Kvaerner Plant Engineering Services. Instrumentation
and Control Design Engineering for chemical manufacturing processes. Designed installation of
a Honeywell Distributed Control System with installation in parallel with, then replacing, an
existing production unit Fisher DCS.
Instrumentation & Control Engineer, E. I. Dupont, Inc., Memphis, TN Sep 1994 to
Dec 2008. On contract from Allstates Technical Services, LLC., Newark, DE. Instrumentation
and Control Design Engineering for chemical manufacturing, power and waste treatment
processes. Designed, sized, specified and requisitioned instrumentation and equipment for
process measurement and control, including replacing four Distributed Control Systems.
Prepared drawings using MicroStation, project authorization papers, estimates and
documentation using Microsoft Access, Excel, and Word, Adobe PDF’s, etc. Created
Engineering Project Database/Report System, Plant Drawing and Loop Device Database
Applications.
Instrumentation & Control Engineer, Logical Systems, Inc., Bartlett, TN Oct 1993
to Sep 1994. Developed instrumentation sizing, specifications, and basis data for a refinery
DCS conversion. Designed, specified, and programmed A-B SLC-5/03 system controlling a
public potable water treatment plant.
Project Engineer, E. I. Dupont, Inc., Memphis, TN Jul 1986 to Oct 1993. On contract
from Midwest Technical Inc., Oak Ridge, TN Instrumentation and Control Design Engineering
for chemical manufacturing, power and waste treatment processes. Developed scopes of work,
specified equipment, supervised design and drafting, prepared estimates, appropriation requests,
allocations and write-offs. Jobs ranged from single control loops and PLC's, to DCS systems.
Research & Development Engineer, Southern Systems, Inc., Memphis, TN Dec 1985
to Jul 1986. Designed, developed and patented a portable conveyor chain tension measurement,
R.F. telemetry and data acquisition system. Designed and started up conveyor PLC controls.
Project Engineer, E. I. DuPont Inc., Memphis, TN Mar 1985 to Oct 1985. On contract
from George-Par Inc., Memphis, TN. Instrumentation and Control Design Engineering for
chemical manufacturing processes. Designs involved level, flow, temperature, pH, pressure,
weight, analytical measurements and machine control.
Field Service Manager, Digital Switch Corporation, Richardson, TX Jun 1982 to Mar
1985. Supervised a national organization of field service engineers, and a technical assistance
center supporting telecommunications products.
Page 1
2. Larry A. May 1979 Kirby Parkway Memphis, TN 38119 Ph. 901-288-5004
Email: larryamay@bellsouth.net
Maintenance Supervisor, International Harvester, Inc., Memphis, TN Feb 1979 to
Jun 1982. Supervised plant electronics maintenance on computerized warehouse systems, NC
and CNC machines, instrumentation and inspection systems. Designed and applied for patents
on an electromagnetic machined part ejection system.
Associate Industrial Engineer, Raytheon Co. Missile Systems Div., Bristol, TN. Jan
1976 to Feb 1979. Supervised electronics maintenance, including NC, CNC, process
instrumentation, and plant security systems. Designed an energy management system with both
consumption and demand rate control.
Owner/Operator EEM Company, Jonesborough, TN Mar 1975 to Jan 1976. Designed,
built, and serviced industrial machine and process controls including numerical control
machines.
Product Engineer, Weldynamics, Inc., Greeneville, TN Aug 1974 to Mar 1975.
Designed SCR firing angle, motor speed controls and P.C. boards for industrial welding machine
products. Provided technical support to production.
Project Engineer, Keene Corporation, Greeneville, TN Jul 1967 to Aug 1974 Designed
self-service gasoline dispensing controls. Patented a cash operated, vending system using CMOS
IC's and an electromagnetic logic control system. Provided technical support to production.
Electronics Maintenance Technician, Magnavox, Inc., of TN, Greeneville, TN. Jul
1964 to Jul 1967 Maintained consumer electronics production test equipment, signal generating
and distribution systems.
Military: U.S. Navy, Aviation Electronics Technician (E5), Radar, Jun 1960 to May
1964. Honorable discharge, good conduct and many service commendations. Served as squadron
electronics quality control Petty Officer.
Patents Awarded:
4,803,886 -Conveyor tension acquisition via R.F. telemetry
3,895,268 -Fuel dispensing system remote control console
3,858,758 -Post-pay fuel dispensing system
3,735,897 -Self service dispensing remote control system
3,587,808 -Magnetically biased reed relay logic
Licenses Certifications & Activities: FCC Commercial General Radiotelephone License
with ship's radar endorsement. Amateur Radio Operator-Extra Class License, NESDA Certified
Electronics Technician Reg. No. TN-37, Numerical Control Society Certified Numerical Control
Manager, Instrument Society of America Memphis Chapter, Served as Chairman of Show
Committee, President, V.P. and Secretary. Participated in professional and service organizations.
Education Steed College, Johnson City, TN.-Associate in Science in Management, May
1976 East Tennessee State University, Johnson City, TN. Continuing Education, Bristol-Sullivan
Tech., Designing with Micro-Processors, U.S.Navy Electronics Schools: Aviation Electronics
Technician, Radar, Doppler, IFF, TACAN, Radar Altimeter, Radio communications, Industry
Schools: Allen Bradley PLC-2, Texas Instruments TI-530 PLC, Jones & Lamson Numerical
Control, Fisher "Provox" DCS configuration, Giddings & Lewis Numerical Control, Boston
Digital CNC, Universal Instruments CNC, Honeywell Flame safeguard Controls, DEC: RSX
11M, PDP 11 Assembly, Macro 11 Programming and Numerous in-house seminars.
Page 2