The document provides instructions for parts books, including definitions of column headings in parts number pages and notes about country codes. It then provides a sample page from a parts book for a G4200H product that lists over 200 individual part numbers, descriptions, quantities, serial number ranges, interchangeability, remarks and weights.
DESIGN AND OPTIMIZATION OF “KLANN MECHANISM” USING OCTO-POD ROBOTNikhil Koli
This project highlights the reduction in jerk-imparted to the robot by improving the root gait profile of "KLANN Mechanism" used for locomotion in robot.
DESIGN AND OPTIMIZATION OF “KLANN MECHANISM” USING OCTO-POD ROBOTNikhil Koli
This project highlights the reduction in jerk-imparted to the robot by improving the root gait profile of "KLANN Mechanism" used for locomotion in robot.
Electric Vehicles in India: Challenges & Opportunities Nitin Sukh
Electric vehicles (EVs) are no longer science fiction. Scientific achievements in this space have led to the mainstreaming of EVs in the United States, Israel and some European countries. India isn’t far behind either with Mahindra-Reva, Hero Electric and other domestic OEMs leading the front. Durable lithium ion batteries, fast charging networks, efficient chassis design and electric drive trains are key links in the EV value chain and extensive technological progress has been made in all these areas. However, for EVs to truly lead GhG reduction in Indian Industry and have a positive impact on the country’s energy security, the integration of smart grids and renewable energy feeds into these grids are a must. In fact, without these two critical components, the introduction of EVs into the current ecosystem would be an ecological burden and lead to greater GhG emissions since energy will be derived from a predominantly coal powered and inefficient energy grid.
Therefore, this study undertaken by YES BANK and TERI-BCSD critically analyses the EV value chain, identifying hidden triple bottom line risks and highlighting innovative clean technologies and business models that mitigate those risks, thereby making the value chain more attractive from lending and investment perspectives. The paper also concludes with a sobering and pragmatic analysis of the current and projected EV scenario in India versus the internal combustion engine.
Speed Control of DC Motor using PID Controller for Industrial Applicationijtsrd
This paper is to design PID controller to supervise and control the speed response of the DC motor and MATLAB program is used for industrial application . PID controllers are widely used in a industrial plants because of their simplicity and robustness. The results obtained from simulation are approximately similar to that obtained by practical. Also the dynamic behavior is studied. Manoj Kumar Ranwa | Ameen Uddin Ahmad "Speed Control of DC Motor using PID Controller for Industrial Application" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26599.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26599/speed-control-of-dc-motor-using-pid-controller-for-industrial-application/manoj-kumar-ranwa
-- Graduation Project 2017
-- Faculty of engineering university , Electrical Engineering Department , Power & Machines Section
-- Our project is Electric car
-- This link of our book :
https://drive.google.com/file/d/0B1-PUweW3orNc2R6YWFWSzRJeDQ/view?usp=sharing
-- This presentation contain
1- Introduction
History Of Electric Car
Difference Between Engine and Electric Car
Why Electric Car and Why not?
Types Of Electric Car
How It Works?
2. Main Components Of Electric Car
Motor
Controller
Batteries
Transmission
Braking
Steering
Electric cars are automobiles, which are powered by the electric engine and electric energy. The development of the electric vehicles is a very perspective and important process. Scientists and engineers managed to create electric engines which are no less effective than the ordinary engines used today. It is obvious that electric cars are more ecologically safe and require less energy for work. EVs provide fast acceleration by delivering power instantly to the wheels by providing high torque at low speeds; they give a feel of smooth and quick responsiveness (Technology).
• Plug-in Hybrid-Electric Vehicles (PHEVs), are hybrids with high capacity batteries that can be charged by plugging them into an electrical outlet or charging station. They can store enough electricity to significantly reduce their petroleum use under typical driving conditions
This PPT will give you a detail about the self-balancing scooters and safety concerns. Visit here: http://theselfbalancingscooters.com/reviews/powerboard-by-hoverboard-2-wheel-self-balancing-scooter-review/
Hydrogen as a Transport Fuel: The Key to Reducing UK Oil Dependence?
Speaker: Prof. Kevin Kendall (Birmingham University, School of Chemical Engineering)
Professor Kevin Kendall has been researching hydrogen and fuel cells for 30 years. He was responsible for the first hydrogen filling station in England, which has fuelled hydrogen vehicles running on the Birmingham University campus since 2008. But what is the full potential of hydrogen as a transport fuel? When can we expect affordable mass production of fuel cell vehicles to occur? How can large quantities of hydrogen be produced cleanly? Prof. Kendall will address these issues and take questions from the floor.
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine e is connected to a dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic energy into electrical energy. The generated power can be stored in the battery and then this electric power has loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and the air tank has pressure relief valve to control the pressure in the tank . The air tank supplies the compressed pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a double acting cylinder which converts hydraulic energy into linear moti on.
Electric Vehicles in India: Challenges & Opportunities Nitin Sukh
Electric vehicles (EVs) are no longer science fiction. Scientific achievements in this space have led to the mainstreaming of EVs in the United States, Israel and some European countries. India isn’t far behind either with Mahindra-Reva, Hero Electric and other domestic OEMs leading the front. Durable lithium ion batteries, fast charging networks, efficient chassis design and electric drive trains are key links in the EV value chain and extensive technological progress has been made in all these areas. However, for EVs to truly lead GhG reduction in Indian Industry and have a positive impact on the country’s energy security, the integration of smart grids and renewable energy feeds into these grids are a must. In fact, without these two critical components, the introduction of EVs into the current ecosystem would be an ecological burden and lead to greater GhG emissions since energy will be derived from a predominantly coal powered and inefficient energy grid.
Therefore, this study undertaken by YES BANK and TERI-BCSD critically analyses the EV value chain, identifying hidden triple bottom line risks and highlighting innovative clean technologies and business models that mitigate those risks, thereby making the value chain more attractive from lending and investment perspectives. The paper also concludes with a sobering and pragmatic analysis of the current and projected EV scenario in India versus the internal combustion engine.
Speed Control of DC Motor using PID Controller for Industrial Applicationijtsrd
This paper is to design PID controller to supervise and control the speed response of the DC motor and MATLAB program is used for industrial application . PID controllers are widely used in a industrial plants because of their simplicity and robustness. The results obtained from simulation are approximately similar to that obtained by practical. Also the dynamic behavior is studied. Manoj Kumar Ranwa | Ameen Uddin Ahmad "Speed Control of DC Motor using PID Controller for Industrial Application" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26599.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26599/speed-control-of-dc-motor-using-pid-controller-for-industrial-application/manoj-kumar-ranwa
-- Graduation Project 2017
-- Faculty of engineering university , Electrical Engineering Department , Power & Machines Section
-- Our project is Electric car
-- This link of our book :
https://drive.google.com/file/d/0B1-PUweW3orNc2R6YWFWSzRJeDQ/view?usp=sharing
-- This presentation contain
1- Introduction
History Of Electric Car
Difference Between Engine and Electric Car
Why Electric Car and Why not?
Types Of Electric Car
How It Works?
2. Main Components Of Electric Car
Motor
Controller
Batteries
Transmission
Braking
Steering
Electric cars are automobiles, which are powered by the electric engine and electric energy. The development of the electric vehicles is a very perspective and important process. Scientists and engineers managed to create electric engines which are no less effective than the ordinary engines used today. It is obvious that electric cars are more ecologically safe and require less energy for work. EVs provide fast acceleration by delivering power instantly to the wheels by providing high torque at low speeds; they give a feel of smooth and quick responsiveness (Technology).
• Plug-in Hybrid-Electric Vehicles (PHEVs), are hybrids with high capacity batteries that can be charged by plugging them into an electrical outlet or charging station. They can store enough electricity to significantly reduce their petroleum use under typical driving conditions
This PPT will give you a detail about the self-balancing scooters and safety concerns. Visit here: http://theselfbalancingscooters.com/reviews/powerboard-by-hoverboard-2-wheel-self-balancing-scooter-review/
Hydrogen as a Transport Fuel: The Key to Reducing UK Oil Dependence?
Speaker: Prof. Kevin Kendall (Birmingham University, School of Chemical Engineering)
Professor Kevin Kendall has been researching hydrogen and fuel cells for 30 years. He was responsible for the first hydrogen filling station in England, which has fuelled hydrogen vehicles running on the Birmingham University campus since 2008. But what is the full potential of hydrogen as a transport fuel? When can we expect affordable mass production of fuel cell vehicles to occur? How can large quantities of hydrogen be produced cleanly? Prof. Kendall will address these issues and take questions from the floor.
The aim is to design and to develop an air brake system based on exhaust gas is called “fabrication of air brake system using engine exhaust gas”. The main aim of this project is to reduce the workloads of the engine drive to operate the air compressor, because here the compressor is not operated by the engine drive.
Here we are placing a turbine in the path of exhaust from the engine. The turbine e is connected to a dynamo by means of coupling, which is used to generate power. Depending upon the airflow the turbine will start rotating, and then the dynamo will also starts to rotate. A dynamo is a device which is used to convert the kinetic energy into electrical energy. The generated power can be stored in the battery and then this electric power has loaded to the D.C compressor. The air compressor compresses the atmospheric air and it stored in the air tank and the air tank has pressure relief valve to control the pressure in the tank . The air tank supplies the compressed pneumatic power to the pneumatic actuator through solenoid valve to apply brake. The pneumatic actuator is a double acting cylinder which converts hydraulic energy into linear moti on.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
1. Instructions for Parts Books
The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part
numbers.
Definition of column headings on part number pages:
REF.No à The number refering to the part on the picture page of the parts book.
Part No. à The number assigned to this part at the time of printing the parts book.
Description àDiscription of part.
Q'ty à Quanity of part used on that page.
S.No. à Serial number range of the equipment that this part will fit.
>= Your serial number should be greater than or equal to the number shown.
<= Your serial number should be lesser than or equal to the serial number shown.
I/C à Interchangeability of part shown.
ß
ßà
à The part shown will work for the older and later serial number.
# The part shown is not interchangable with the other serial number.
ß new for old
à old for new
Remarks à Notes about this particulart part. Sometimes this may say except [FR] or [CA]
Note about Country Codes:
The parts books we use in the United States of America may also contain information about a part that would be
different in another country. It is important that you are aware of the country codes in some instances.
Symbol Country
A United States of America
CA Canada
FR France
GR Greece
PO Portugal
AU Australia
If the remarks column says for example EXCEPT [FR] this part works in all countries except France.
That means it will work here in the USA.
2. |ALL PRODUCT INDEX
G4200H
Ref. G4200H Page 22010
ENGINE
FUEL SYSTEM
COOLING WATER SYSTEM
ELECTRICAL SYSTEM
TRANSMISSION
SPEED CHANGE
REAR AXLE/REAR WHEEL
BRAKE
FRONT AXLE/FRONT WHEEL
STEERING
HYDRAULIC SYSTEM
MOWER LINK/DRIVE BELT
BONNET/HOOD/CHASSIS
LABELS
ACCESSORIES
3. Ref. G4200H Page 22010
Item Part No. Description Book
ENGINE 01E01 CRANKCASE 100K0077
01E02 OIL PAN 100K0077
01E03 CYLINDER HEAD 100K0077
01E04 GEAR CASE 100K0077
01E05 MAIN BEARING CASE 100K0077
01E06 CYLINDER HEAD COVER 100K0077
01E07 MANIFOLD 100K0077
01E08 VALVE/ROCKER ARM 100K0077
01E09 CAMSHAFT 100K0077
01E10 PISTON/CRANKSHAFT 100K0077
01E11 FLYWHEEL 100K0077
01E12 NOZZLE HOLDER 100K0077
01E13 INJECTION PUMP 100K0077
01E14 IDLING APPARATUS 100K0077
01E15 GOVERNOR 100K0077
01E16 SPEED CONTROL PLATE 100K0077
01E17 DYNAMO 100K0077
01E18 WATER FLANGE 100K0077
01E19 WATER PUMP 100K0077
01E39 NOZZLE HOLDER (SECTION PARTS) 100K0077
01E40 INJECTION PUMP (SECTION PARTS) 100K0077
01E41 DYNAMO (SECTION PARTS) 100K0077
HYDRAULIC SYSTEM 01I09 HYDRAULIC OUTLET (OPTION) 100K0077
01I10 AUX CONTROL VALVE (OPTION) 100K0077
01I11 3-POINT LINKAGE (OPTION) 100K0077
MOWER LINK/DRIVE BELT 01I12 REAR PTO (OPTION) 100K0077
HYDRAULIC SYSTEM 01I13 HYDRAULIC LIFT (OPTION) 100K0077
TRANSMISSION 01T01 TRANSMISSION CASE 100K0077
01T02 PROPELLER SHAFT 100K0077
01T03 4TH SHAFT 100K0077
01T04 5TH SHAFT 100K0077
01T05 DIFFERENTIAL 100K0077
REAR AXLE/REAR WHEEL 01T06 REAR AXLE 100K0077
BRAKE 01T0701 BRAKE 100K0077
01T0702 BRAKE 100K0077
TRANSMISSION 01T08 PTO SHAFT 100K0077
01T09 TENSION PULLEY 100K0077
01T10 PTO LEVER 100K0077
01T11 H.S.T. 100K0077
HYDRAULIC SYSTEM 01T12 HYDRAULIC PIPE 100K0077
STEERING 01T15 STEERING 100K0077
BRAKE 01T16 BRAKE PEDAL 100K0077
SPEED CHANGE 01T17 ACCEL.LEVER 100K0077
01T18 SPEED CHANGE LEVER 100K0077
01T19 ENGINE STOP WIRE 100K0077
MOWER LINK/DRIVE BELT 01T2001 LIFT LEVER 100K0077
01T21 LIFT LINK 100K0077
BONNET/HOOD/CHASSIS 01T2201 SEAT 100K0077
01T2202 SEAT 100K0077
LABELS 01T23 LABEL 100K0077
BONNET/HOOD/CHASSIS 01T24 FRAME 100K0077
01T25 FENDER 100K0077
COOLING WATER SYSTEM 01T26 RADIATOR 100K0077
FUEL SYSTEM 01T27 FUEL TANK 100K0077
BONNET/HOOD/CHASSIS 01T28 PANEL COVER 100K0077
01T29 RADIATOR NET 100K0077
4. Ref. G4200H Page 22010
Item Part No. Description Book
BONNET/HOOD/CHASSIS 01T30 HOOD 100K0077
ELECTRICAL SYSTEM 01T31 ELECTRICAL SYSTEM 100K0077
01T32 BATTERY 100K0077
FRONT AXLE/FRONT WHEEL 01T33 FRONT AXLE 100K0077
ENGINE 01T34 MUFFLER 100K0077
01T35 AIR CLEANER 100K0077
FUEL SYSTEM 01T36 FUEL PUMP 100K0077
01T37 FUEL FILTER 100K0077
01T38 FUEL PIPE 100K0077
ELECTRICAL SYSTEM 01T39 STARTER 100K0077
FUEL SYSTEM 01T42 FUEL FILTER (SECTION PARTS) 100K0077
ELECTRICAL SYSTEM 01T43 STARTER (SECTION PARTS) 100K0077
BONNET/HOOD/CHASSIS 01T45 SEAT SUSPENTION KIT (OPTION) 100K0077
ELECTRICAL SYSTEM 01T46 COMBI.METER KIT (OPTION) 100K0077
ENGINE 01T47 EXHUST PIPE KIT (OPTION) 100K0077
ACCESSORIES 01T48 ACCESSORIES AND SERVICE PARTS 100K0077
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
![Instructions for Parts Books
The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part
numbers.
Definition of column headings on part number pages:
REF.No à The number refering to the part on the picture page of the parts book.
Part No. à The number assigned to this part at the time of printing the parts book.
Description àDiscription of part.
Q'ty à Quanity of part used on that page.
S.No. à Serial number range of the equipment that this part will fit.
>= Your serial number should be greater than or equal to the number shown.
<= Your serial number should be lesser than or equal to the serial number shown.
I/C à Interchangeability of part shown.
ß
ßà
à The part shown will work for the older and later serial number.
# The part shown is not interchangable with the other serial number.
ß new for old
à old for new
Remarks à Notes about this particulart part. Sometimes this may say except [FR] or [CA]
Note about Country Codes:
The parts books we use in the United States of America may also contain information about a part that would be
different in another country. It is important that you are aware of the country codes in some instances.
Symbol Country
A United States of America
CA Canada
FR France
GR Greece
PO Portugal
AU Australia
If the remarks column says for example EXCEPT [FR] this part works in all countries except France.
That means it will work here in the USA.](https://image.slidesharecdn.com/kubotag4200hlawnmowerpartscataloguemanual-210518095049/85/Kubota-g4200-h-lawn-mower-parts-catalogue-manual-1-320.jpg)
