Komvision is Komatsu's solution to ISO 5006:2017 and improves the operators field of view in a range of Komatsu excavators. If you require further information please visit: https://marubeni-komatsu.co.uk/contact-us/general-enquiry/ and enter any questions you may have and a member of our team will be in touch.

1. KOMATSU CRAWLER
EXCAVATOR - KOMVISION
Komatsu’s solution to ISO 5006:2017

2. ISO 5006:2017
2
• Previously, visibility and vision map testing was carried out only in one position:
travel position (1).
• ISO5006 requires full vision availability during all operations.
Testing is now required in 3 positions: (1,2,3)

3. KomVision
• Excavators will have
3 or 4 cameras
factory fitted
depending on the
model of the
machine.
3
1 2
3
4
Komatsu’s solution to improving operators field of view.

4. How is the “birds eye” view created?
• The birds eye view is created
by taking the individual
signals from each camera and
“stitching” them together to
create a seamless overhead
view of the machine.
• The overlap areas of the
cameras is enough to ensure
a clean transfer from one
camera to the next.
4
Single Camera area
Overlapping Camera area

5. Why is KomVision not a 360 camera system?
• For crawler and wheeled excavators the working area visibility directly in front of the
operators cab is excellent – no need to be covered by an extra camera.
• Incorporating the working area in front of the machine into KomVision would mean
including the work equipment which is constantly moving during working – this
could distract the operator.
• The operator should be concentrating on his operation and the constant movement
of the work equipment on the monitor can be distracting.
• Also constant movement on the monitor panel can desensitise the operator from
movement in more critical areas around the machine.
5
Work equipment:
In View
Out of View

6. Extra safety features
• Camera image automatically changes to the default screen when
any hydraulic controls are activated.
• This is NOT a requirement of ISO 5006:2017.
6
Any control movement will activate the
monitor default screen
e.g. F6 to select options.
If PPC or travel levers are activated
the monitor will return to the default
image.
Default Screen Image:
Bird’s eye view, rear view
camera and gauges.

7. Default in cab screen
7
Birds eye view
incorporates input from
all cameras and creates
a bird’s eye view.
Default screen
shows rear view
camera image.

8. Operator selectable views:
8
Default screen,
Images & gauges
F4 to select a
camera image
(Birds eye view
remains)
Default screen,
Images & gauges
F3 for full
screen image
F3 to select full screen
rear view camera
F4 to select different
camera image

9. 9
Need more information?
Call 01527 512 512
www.marubeni-komatsu.co.uk