This document provides instructions for repairing an inflatable stand up paddleboard (SUP) in 6 steps: 1. Get the necessary tools and clean the area with MEK or acetone solvent. 2. Drill to release air, cut open the board, and apply three layers of glue and hardener with 10 minutes between each layer. 3. Press firmly to remove air bubbles, reinflate to check for bubbles, deflate and drill if needed, then let rest for 48 hours. 4. Precut new PVC and draw patterns on the repair area. 5. Apply three more layers of glue and hardener with 10 minutes between layers. 6. Let dry for another 48 hours