The document describes a product called the Slicknut, which is a patented connector that fits all brands of connectors. It can be used as a ground bushing, pull bushing, locknut, or all three functions. Installing a Slicknut on every connector before pulling wire allows the wire to pull freely with less fatigue, eliminates ground faults, and prevents damage to wires. The Slicknut is made in the USA, UL approved, and provides multiple benefits over traditional methods for pulling and terminating wires.

1. RADIUS ON
SLICKNUT
ALLOW WIRE
TO PULL
FREELY
PULL
BUSHING
LESS FATIGUE.
NO MORE
GROUND
FAULTS.
FIND
OUT
MORE
WWW.KISTCORP.COM
US Approved
CUL Approved
File #360209
File #E335817
US Patent # 7868252-82
Made in the USA
(630) 332-5223
INSTALL A SLICKNUT
ON EVERY
CONNECTOR
BEFORE PULLING WIRE
FITS ALL
CONNECTORS
• Patented rounded edge with serrated bottom to
ensure poisitve bonding.
• Has 3 holes to choose from grounding and
bonding.
• Approved as a locknut. Ground bushing and
Pull bushing.
• Split Insulator UL Approved 1/2"-4" 105C Rated.
•Fits all brands of connectors, heavy wall and thin
wall connectors.
•Threadless versions fit heavy wall or thin wall pipes.
High/ Volatge / Low
Voltage
Panels, Junction Boxes
1900 Boxes, 11B Boxes
CT Cabinets
Main Distribution Panels
Camera Systems
Solar Systems
Fire, Alarm & Surveilence
GROUND
BUSHING
THREADLESS
GROUND
BUSHING
THREADLESS
PULL BUSHING
1229 CAPITOL DRIVE ADDISON, IL 60101 • (630) 332-5223
The first
connector
that pay's
you back
Intended Uses:

2. VERY
FATIGUED
EMPLOYEES
LESS
PRODUCTION
$500
NEVER BREAK ANOTHER LOCKNUT AGAIN (NO LOCK
NUT NEEDED BELOW, UL APPROVED AS LOCKNUT)
NEVER FAIL AN ELECTRICAL INSPECTION DUE TO
LOOSE CONNECTIONS (HAS SERATED TEETH TO
PREVENT FROM LOOSENING UP)
CAN BE USED FOR HIGH VOLTAGE, OR LOW VOLTAGE
MADE WITH ZINC, HAS VERY GOOD RUST PROTECTION
PROPERTIES.
ALLOWS MULTIPLE SIZE OF LUG’S TO BE MOUNTED
HAS 3 POSITIONS FOR LUG AND SET SCREW TO BE
MOUNTED
CAN BE USED ON ALL BRANDS OF CONNECTORS
100% MADE IN USA
NEVER HAVE TO STRAIN YOUR SELF TO CONTROL
GUIDANCE OF WIRES WHEN PASSING THROUGH OUR
BUSHING.
NEVER DAMAGE YOU ROPE’S OR FISH TAPES AGAIN.
CAN BE USED AS GROUND BUSHING, PULL
BUSHING,LOCKNUT,ALL IN ONE
CAN BE USED AS PULL BUSHING, LOCKNUT.
ALSO AVAILABLE IN THREADLESS VERSIONS WHICH FITS
HEAVY WALL AND THIN WALL WITHOUT THE USE OF A
CONNECTOR BELOW.
YOU'LL WISH YOU HAD THIS A LONG TIME AGO.
NEVER DAMAGE ANOTHER CONDUCTOR’S INSULATION
AGAIN (SMOOTH ROUNDED EDGE)
LABOR SAVER 1 MAN CAN PULL WIRES, TWO MEN IS
ALWAY’S SAFER
NEVER FORGET TO INSTALL GROUND BUSHING AGAIN
(AVOIDS DISCONNECTING ALL TERMINATED WIRING
OR PURCHASING EXPENSIVE SPLIT BOLT GROUND
BUSHINGS)
NEVER BREAK PLASTIC INSULATOR AGAIN
(INSTALLS AFTER THE PULL)
NEVER GET FINGER OR HAND PULLED BY OTHERS INTO
1900 BOXE’S OR CONNECTORS AGAIN (ROUNDED EDGE
IS SMOOTH)
NEVER HAVE TO UNTANGLE WIRE’S AGAIN
(CONTINIOUSLY PULL THROUGH J BOXES)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
used $2,200 of
Slicknut products
No searching for ground faults
No more tangled wires
Less fatigued employees
SIX STORY STORAGE FACILITY
SAVED $4,200