Kennards Hire is a family-owned Australian company that has been in the equipment hire business for over 65 years. It has grown from a single outlet to become one of Australia's leading hire companies with over 900 employees across more than 160 hire centers nationally. The document discusses Kennards Hire's rail division, which provides equipment hire specifically for rail maintenance and construction projects. This includes a wide range of equipment such as clipping machines, rail drills, tampers, welders, and lighting, suited to different rail gauges across Australia. Kennards Hire Rail aims to offer expert advice, tailored solutions, well-trained staff with rail industry experience, and reliable, well-maintained equipment to help customers complete
Carter’s Xtenda Series stainless steel needle bearings are available in both standard and custom sizes. You can order Cam Followers from stock in sizes 1/2 thru 2 1/2 and cam yoke rollers from 3/4 thru 2 1/2,with custom designs available for virtually any special application. For More Information please Visit: http://www.carterbearings.co.uk/wp-content/themes/default/downloads/carter/Carter_catalogue.pdf
Carter’s Xtenda Series stainless steel needle bearings are available in both standard and custom sizes. You can order Cam Followers from stock in sizes 1/2 thru 2 1/2 and cam yoke rollers from 3/4 thru 2 1/2,with custom designs available for virtually any special application. For More Information please Visit: http://www.carterbearings.co.uk/wp-content/themes/default/downloads/carter/Carter_catalogue.pdf
2013 Masters Thesis Project at Umeå Institute of Design in collaboration with Volvo Group, Sweden. Duration: 17 weeks
--
Indian Railways has grown 10-fold in the last 50 years, but rail track length has only increased 1.4 times & construction methods have hardly changed. The aim was to design the future of railway-track construction in developing countries.
Volvo LINK 500 is a vehicle which lays prefabricated concrete slabs cyclically along a GPS mapped route. Minimizing operator error & increasing efficiency. Manual workforce is still involved in the rough work of placing dowels, which serve as GPS locators/slab guides.
BENEFITS Unlike traditional excavators, the structure of this vehicle allows it to pass over a material-carrying train. It is cheaper, easier to assemble & transport than current solutions, & requires no auxiliary track because it uses pneumatic tyres.
A brand new in-ground up-lighter from HESS, Germany for outdoor illumination. LED, but glare free. Homogeneous wall washing. Asymmetrical or symmetrical light distribution. Round or linear versions. State of the art reflector technolgy.
En un hecho sin precedentes, el Gobierno del Perú presidido por el Comandante Ollanta Humala Tasso, a través de PROBNABEC, inició la Maestría en Ciencias de Educación, cuyos beneficiarios han sido seleccionados mediante una evaluación meritocrática y rigurosa.
ip-label recrute !
Nous recherchons un Ingénieur Support Client pour nous accompagner dans notre développement international. Consultez notre fiche de poste !
2013 Masters Thesis Project at Umeå Institute of Design in collaboration with Volvo Group, Sweden. Duration: 17 weeks
--
Indian Railways has grown 10-fold in the last 50 years, but rail track length has only increased 1.4 times & construction methods have hardly changed. The aim was to design the future of railway-track construction in developing countries.
Volvo LINK 500 is a vehicle which lays prefabricated concrete slabs cyclically along a GPS mapped route. Minimizing operator error & increasing efficiency. Manual workforce is still involved in the rough work of placing dowels, which serve as GPS locators/slab guides.
BENEFITS Unlike traditional excavators, the structure of this vehicle allows it to pass over a material-carrying train. It is cheaper, easier to assemble & transport than current solutions, & requires no auxiliary track because it uses pneumatic tyres.
A brand new in-ground up-lighter from HESS, Germany for outdoor illumination. LED, but glare free. Homogeneous wall washing. Asymmetrical or symmetrical light distribution. Round or linear versions. State of the art reflector technolgy.
En un hecho sin precedentes, el Gobierno del Perú presidido por el Comandante Ollanta Humala Tasso, a través de PROBNABEC, inició la Maestría en Ciencias de Educación, cuyos beneficiarios han sido seleccionados mediante una evaluación meritocrática y rigurosa.
ip-label recrute !
Nous recherchons un Ingénieur Support Client pour nous accompagner dans notre développement international. Consultez notre fiche de poste !
OAASIS Group, a DistributionNOW company, is a leading distributor of PPE and MRO equipment, supporting clients worldwide.
Strategically located in Great Yarmouth and Aberdeen with facilities in Lowestoft, OAASIS operates an extensive industrial distribution network to support on and offshore energy sectors by supplying essential and specialist PPE and MRO equipment.
Browse through our 2015 company booklet and visit www.oaasisgroup.com for more information.
Sapcor is an Algerian company based in the oilfield area of Hassi Messaoud for the provision of various services to oil and gas companies such as rig moves, equipment rental, transportation, lifting and handling...
HENDERSON provides turn-key rig services, capital equipment repair and overhaul, and high and low pressure piping manufacturing. HENDERSON is a values-driven company who is committed to providing our customers with unparalleled customer service through responsiveness, transparency, and fair and competitive pricing. To learn more, please visit our website at www.hendersonrigs.com.
2. In 1948, my grandfather created Kennards Hire by opening
one small outlet in Bathurst. Today, we’re still a family-owned
business, despite having grown into one of Australia’s leading
hire companies, and we proudly employ over 900 Australians.
Our heritage spans more than 65 years in the hire industry
and we have an enviable reputation for quality, reliability,
value for money and service.
Angus Kennard
Kennards Hire
Kennards Hire has been an iconic brand for many years in
the hire industry, and it is a privilege for me to have joined an
organisation that is not only known for being a premium hire
brand, but that is also known for having an amazing family
culture with staff that love serving customers and work to create
a delightful hire experience.
An Australian family-owned company with a proud history,
today Kennards Hire have more than one hundred and sixty
hire centres nationally, but we still retain the personal touch that
sets us apart from other hire companies. When you hire from
Kennards, you can expect friendly service that is second to none
– whether it’s an urgent delivery to your job site or after hours
help when you need it.
As CEO, my main objective is to support our team in delivering
outstanding service to you, our customers, at every opportunity.
Whether you are a professional tradesperson, a project, site or
construction manager or a renovation enthusiast, delivering
the latest equipment and excellent quality, reliability and value
is our priority.
We have substantially expanded our business to include specialist
hire centres with purpose built equipment and highly trained
staff who understand your needs and offer round the clock
support. We’ve partnered with leading suppliers to offer you
more tools and equipment to make your job easy. We’ve sought
and implemented world’s best practice to improve our service
and ensure our equipment is always in good working order.
LETTER FROM THE CEO
Liz Ward
CEO
Our hire centres are conveniently located in the places you need
them, close to your work site or your daily commute. These are
just some of the ways we’re determined to add more value to your
hiring experience.
So whether it’s the assistance that we offer or the extensive range of
equipment that we provide, you can be confident that Kennards Hire
will help you get the job done. We look forward to seeing you soon.
Our people are a fundamental reason
for our success – without them we
would be just another hire company.
Their passion and commitment to
making your job easy is what sets us
apart from our competition.
Kennards has always been at the forefront of the equipment
hire industry. Our operations are regarded as the benchmark to
emulate, both here in Australia and overseas. So you can be
confident that with Kennards on the job, you’re in good hands.
3. CLIPPING EQUIPMENT 5
TRACK GEOMETRY & RAIL TESTING 11
RAIL GRINDERS 13
TRACK HAND TOOLS 15
TRACK JACKS 21
LIGHTING 23
MATERIAL HANDLING 27
TAMPERS & TENSORS 33
DRILLS 37
PUSH TROLLEYS 41
WELD SHEARS 43
WELDING EQUIPMENT 45
CONTENTS
THE HIRE
STANDARD
Easy. We think that’s how life should be for all
Australians. And by opening up new branches
around the country,we’re helping make this a
reality – whether you’re a professional tradie
or DIY home improver.
With over 65 years’ experience,we’re always
expanding our range of equipment and
services to suit the needs of our customers.
We also have a range of specialist divisions –
like Concrete Care,Lift & Shift,Traffic,Test &
Measure and Rail.So when you come into any
Kennards Hire branch inAustralia or New
Zealand,no matter what you need – our job is
to make your job easy.
1
RAIL
There is an estimated 44,000 kilometres of
rail network acrossAustralia,all requiring
constant upgrading and maintenance.To
serve the varying needs of rail maintenance
crews,Kennards Hire Australia’s largest and
most respected family owned Hire Company
with over 160 branches nationwide,has
established Kennards Hire Rail.
Located in 4 strategic locations including
Rutherford,Dubbo,Brendale and Brooklyn,
each facility features a large storage
warehouse and yard plus a designated training
area.This allows operators to become familiar
with equipment while attaining competency
on specific machinery,a new industry
requirement,introduced in 2013.
4. WELCOME TO
KENNARDS HIRE RAIL
To ensure the highest standard
of customer service is met and
maintained, Kennards Hire Rail
has developed an accomplished
team with extensive rail
industry knowledge.
To ensure the highest standard of customer service is met
and maintained, Kennards Hire Rail has built a team with
rail industry knowledge. These rail specialists offer valuable
advice and tailored solutions that are flexible, time and cost-
efficient, adding true value to your project.
Meeting your Needs:
Each team member has undergone a rigorous training
program run by our suppliers. Our Rail Team possesses their
(RIW) Rail Industry workers cards, along with specific track
owner accreditation.
Each team member has been trained on our range of
equipment with intensive on the job training. This ensures
they not only understand your needs but the equipment
provided is the most suitable for your project.
Compounding the difference in track gauges even further
is the variation of track fasteners used across the states. In
some areas timber and steel sleepers are still being used.
Kennards Hire Rail carry clipping equipment to manage
these assorted track fastening systems.
Today all equipment that runs on rail is considered ‘rolling
stock’ and as such is viewed the same as a locomotive. This
equipment is required to have the same safety equipment,
such as a mechanical brake under RISBB.
Being aware of the differences has enabled Kennards Hire
Rail to accommodate these requirements into the range of
equipment and negate compatibility or compliance issues.
This makes Kennards Hire Rail a national supplier of rail
maintenance equipment.
The Kennards Hire Rail Product Range
Kennards Hire Rail has a complete range of life cycle
solutions for track maintenance along the line, in stations
and in depot.
Our equipment includes:
· Clipping Machines
· Push Trolleys
· Rail Drills and Rail Saws
· 70 & 120 tonne Tensors
· Railtech®
and Thermit®
Weld Kits for Light Rail and Heavy Rail
· Weld Shears for rail, crane and tram
· Portable Lighting suitable for the rail corridor
· Rail Clamps
· Track Hand Tools
· Track Geometry Testing Equipment
· Rail Benders
· Rail Head Grinders and Switch Grinders
· Hand Tampers, Vortok rollers and Rail Safety Barriers.
All equipment is tagged with a QR code, which provides
instant access via smartphone app to a host of information.
This incorporates service history for that specific piece of
equipment; operator manuals; risk assessment; insurance
details and all other relevant information.
32
5. CLIPPINGEQUIPMENT
CLIPPINGEQUIPMENT
Kennards Hire Rail equipment adds to productivity with its walk behind
clipping machines to suit 1067mm (narrow gauge), 1435mm (standard
gauge) and 1600mm (broad gauge) enabling fast insertion and extraction
of rail track fastenings.
HIGH OUTPUT CLIPPING MACHINE 6
ECLIP INSERTING & EXTRACTING MACHINE 6
FASTCLIP INSERTING & EXTRACTING MACHINE 7
FASTCLIP HANDY CLIPPERS 8
MANUAL CLIPPING HAND TOOLS 9
5
• Full service history
• Certificate of Test and Examination
• Operator’s manual
• Risk assessment
• Pre-delivery checklist
• Online operator safety checks
• User guide
• Equipment videos
• Maintenance schedule
• Insurance details
• Safety alerts
BE IN THE KNOW
WITH QR CODESA FIRST FOR THE HIRE INDUSTRY
What’s more, now ‘Online Operator Safety Checks’
can be recorded straight into the Plant Portal itself.
On-site or Off-site you have instant access to all the
right information. QR codes are an industry first, and
are just one way we try and make your job easier!
4
A lot of work goes on in the background to make a
piece of equipment 'Ready For Hire'. Scanning the QR
code with your handheld device or your desktop and
using the plant number as reference, you gain access
to valuable information relating to that particular piece
of equipment via the Kennards Hire plant portal.
Enter the equipment’s plant number into
www.kennards.com.au/plantportal, or scan the QR
code on it’s Ready for Hire label, and you’ll get the
inside scoop on it’s:
6. CLIPPINGEQUIPMENT
CLIPPINGEQUIPMENT
7
Product code 9002476 9002477 9002478
Gauges (mm) 1067 1435 1600
Length x Width x Height (mm) 1900 x 700 x 1000 1900 x 700 x 1000 1900 x 700 x 1000
Weight 260kg 260kg 260kg
Power 4-stroke-petrol engine 4-stroke-petrol engine 4-stroke-petrol engine
Walk behind clipping and unclipping machine for track fasteners suited to various gauge rails. Quick set up in less than one minute,
ergonomic design, excellent centre of gravity and low weight make for a comfortable and easy operator experience.
Features
• Auto run function.
• Fail safe braking system.
• 6.6kW at 3800rpm.
• Variable gauge trolley.
• Lifts sleepers.
Benefits
• Efficient.
• Powerful.
• Portable.
FASTCLIPINSERTING&EXTRACTING(PETROL)-ROSENQVIST®
MODELONLY
FASTCLIPINSERTING&EXTRACTING(DIESEL&PETROL)-ROBEL®
MODELONLY
Product code 9002479 9002480 9002481
Gauges (mm) 1067 1435 1600
Length x Width x Height (mm) 2300 x 2120 x 120 2300 x 2120 x 120 2300 x 2120 x 120
Weight 260kg 260kg 260kg
Power Diesel & Petrol Diesel & Petrol Diesel & Petrol
Walk behind clipping and unclipping machine for track fasteners suited to various gauge rails. Quick set up in less than one minute,
ergonomic design, excellent centre of gravity and low weight make for a comfortable and easy operator experience.
Features
• Push button start.
• Ergonomically optimised design.
• Flick between insert and extract in less than one minute.
• Variable gauge trolley.
Benefits
• Optimal view of working area.
• Saves time.
• Easy for operator to use.
• Fail safe braking system.
CLIPPINGEQUIPMENT
6
HIGHOUTPUTCLIPPINGMACHINE
The Rosenqvist® CD500 high out put clipping machine is capable of walking onto the track on its own via a remote control system
controlled by the operator standing next to the machine. A single seated operator can simultaneously extract or install four (4) clips on a
sleeper in one action. The CD500 is capable of approx. 4.5km/hour in work mode. It can handle Fastclip®, eClip® and Safe Lok fasteners.
Product code 9002631
Length (mm) Max - 4930 Min - 3870
Width (mm) Max - 2380 Min - 1860
Height (mm) Max - 2540 Min - 1810
Working Width Max - 2380 Min - 1860
Weight 4500kg
Power Diesel
ECLIPINSERTING&EXTRACTING(PETROL)-ROSENQVIST®
MODELONLY
Product code 9002658 9002659 9002660
Gauges (mm) 1067 1435 1600
Length x Width x Height (mm) 2300 x 2120 x 120 2300 x 2120 x 120 2300 x 2120 x 120
Weight 260kg 260kg 260kg
Power 4-stroke-petrol engine 4-stroke-petrol engine 4-stroke-petrol engine
Walk behind clipping and unclipping machine for track fasteners suited to various gauge rails. Quick setup, ergonomic design, excellent
centre of gravity and low weight make for a comfortable and easy operator experience.
Features
• 2 clips per cycle. Clipping: 2 and Declipping: 2.
• Auto run function.
• Minimal hand arm vibration.
• Light for night work.
• Key start.
• Variable gauge trolley.
Benefits
• Optimal view of working area.
• Saves time.
• Easy for operator to use and set up.
• Fail safe breaking system.
Features & Benefits
• Hydraulically manoeuvred legs enable fast and easy
“On and Off tracking”.
• Built-in guiding rollers ensure accurate rail centering.
• Clips and de-clips.
• Rail lift.
• Sleeper lifting unit for low lying sleepers, features
sideways adjustment of + or – 35 mm.
• Hammer for striking the rail during de-stressing.
• Operator training available just ask us how.
CLIPPINGEQUIPMENT
ROSENQVIST®
MODEL SHOWN
ROSENQVIST®
MODEL SHOWN
7. 9
CLIPPINGEQUIPMENT
CLIPPINGEQUIPMENT
ECLIPPANSETTERHAND53KGTO60KG
This hand held pan setter is designed to simplify installation of Pandrol® eClips®
and insulates by ‘centralising’ the rail and lifting low sleepers. Features all steel
construction, spray painted finish.
Features
• All steel construction.
• T-bar handles.
Product code 1050147
Length x Width x Height (mm) 1150 x 270 x 120
Weight 7.5kg
Power Manual
Benefits
• Simplifies eClip and insulator
installation.
• Saves time.
• Lightweight.
8
CLIPPINGEQUIPMENT
ECLIPPANSETTERHAND41KG/47KGTO50KG
This hand held pan setter is designed to simplify installation of Pandrol® eClips®
and insulators by ‘centralising’ the rail and lifting low sleepers. Features all steel
construction, spray painted finish.
Features
• All steel construction.
• T-bar handles.
Product code 1050096
Length x Width x Height (mm) 1150 x 270 x 120
Weight 6.5kg
Power Manual
Benefits
• Portable.
• Robust construction.
• Easy grip.
ECLIPPULLERHAND(5HOLE)
Product code 1050148
Length x Width x Height (mm) 1500 x 350 x 150
Weight 6.5kg
Power Manual
The 5 hole eClip® puller is a robust hand tool for the manual insertion and extraction
of Pandrol® eClips. Features all steel construction, spray painted finish and handles.
Features
• All steel construction.
• T-bar handles.
• Adjustable pulling head.
Benefits
• Simplifies eClips as well as insulator
installation and extraction.
• Saves time and is lightweight.
• Suitable for concrete wooden sleepers.
ECLIPPULLERSINGLEHOLE
Product code 1050149
Length x Width x Height (mm) 1500 x 150 x 80
Weight 8.7kg
Power Manual
A robust manual hand tool used for inserting and extracting Pandrol® eClips® on
concrete sleepers.
Features
• All steel construction.
• T-bar handles.
• Adjustable pulling head.
Benefits
• Simplifies eClip and insulator installation.
• Saves time.
• Lightweight.
• Suitable for concrete wooden sleepers.
FASTCLIPHANDYCLIPPER
The ergonomical handy clipper cilpping head is ideal for smaller jobs. Features its own power supply, weight bearing wheel to prevent
back injuries, a quick connect interface to couple quickly and lifts sleepers up to 10mm.
Features
• Own power supply.
• Weight bearing wheel.
• Lifts sleepers up to 10mm if required.
• Interchargeable heads for clip and declip.
Product code 1050152
Length x Width x Height (mm) 560 x 190 x 370
Weight 24kg
Power Petrol
Benefits
• Prevents back injuries.
• Ideal for small clipping / declipping jobs.
• Allows the Fastclip® to be pushed out into the ‘park’ position without damaging
the insulator.
CLIPPINGEQUIPMENT
8. TRACKGEOMETRYRAILTESTING
TRACKGEOMETRYRAILTESTING
VERSE SFT MEASUREMENT 12
TRACK GEOMETRY 12
11
Eliminate the need for destructive testing. Achieve highly accurate rail
stress assessment to reduce the risk of buckling and fracturing with
the VERSE, a non-destructive method of Stress Free Temperature (SFT)
Measurement.
10
CLIPPINGEQUIPMENT
CLIPPINGEQUIPMENT
FASTCLIPINSERTIONHAND(NARROW)
This hand tool is a manual device for specifically inserting Pandrol® wide and narrow
Fastclips®.
Features
• Inserts track fasteners.
• Manual tool.
• Suitable for Pandrol Fastclips.
Product code 1050094
Length x Width x Height (mm) 1500 x 150 x 80
Weight 8.5kg
Power Manual
Benefits
• Portable.
• Effective.
• Easy to use.
FASTCLIPEXTRACTIONHAND(WIDE)
This hand tool is a manual device for extracting track fasteners such as Pandrol®
Fastclips®.
Features
• Manual tool.
• Suitable for Pandrol Fastclips.
Benefits
• Portable.
• Effective.
• Easy to use.
Product code 1050095
Length x Width x Height (mm) 1500 x 150 x 80
Weight 8.2kg
Power Manual
FASTCLIPINSERTIONHAND(WIDE)
Hand held tool used for inserting track fasteners for rail work – specifically, wide
Fastclips®.
Features
• Hand held.
• Suitable for Pandrol® wide Fastclips.
• Robust construction.
Product code 1050142
Length x Width x Height (mm) 1267 x 270 x 200
Weight 9.4kg
Power Manual
Benefits
• Portable.
• Efficient.
• Durable.
FASTCLIPEXTRACTIONHAND(NARROW)
Hand held tool used for extracting track fasteners for rail work – specifically, narrow
Fastclips®.
Features
• Hand held.
• Suitable for narrow Fastclips.
• Robust construction.
Benefits
• Portable.
• Efficient.
• Durable.
Product code 1050146
Length x Width x Height (mm) 1500 x 150 x 80
Weight 8.9kg
Power Manual
9. RAILGRINDERS
RAILGRINDERS
SMALL PROFILE GRINDER 14
LARGE PROFILE GRINDER 14
SWITCH GRINDER 14
FROG GRINDER 14
13
User-friendly and ergonomically designed grinding equipment from
Kennards Hire Rail. It is compact and light weight, providing efficient
grinding of welds, crossovers, switches and deburring to a finish point.
TRACKGEOMETRYRAILTESTING
12
TRACKGAUGEONEPIECE
A lightweight, digital tool for quick readings of track gauge, track cant, grooves and guide rail dimensions. One piece – electrically
insulated, metric or inch measurements at operator's choice.
Features
• One piece.
• Lightweight.
• Variable gauges.
Gauges (mm) 1067 / 1435 / 1600
Length x Width x Height (mm) 1614 x 102 x 163
Weight 2.5kg
Power Manual
Benefits
• Easy to read.
• Accurate measurements.
VERSESFTMEASUREMENTEQUIPMENT
Product code 9002185
Length x Width x Height (mm) 1100 x 600 x 450
Weight 50kg
Power Battery powered
Rail stress measurement equipment which enables you to test without cutting the rail. 20-30mins per measurement with excellent
accuracy. Reduces the risk of buckling and fracturing. Portable and offers exportable readings via VERSE handheld device.
Features
• Reduces risk of buckling and fracturing.
• Exportable readings.
• Lightweight.
Benefits
• No rail cutting needed.
• Highly accurate.
• Portable.
• Downloadable data.
TRACKGEOMETRYRAILTESTING
10. TRACKHANDTOOLS
TRACKHANDTOOLS
TRACK HAND TOOLS 16
15
Eliminate the expense of purchasing tools. Tamping picks, drift punch,
sledge hammers, ballast forks and turning bars are just some of the
comprehensive range of sundry hand tools available from Kennards
Hire Rail.
RAILGRINDERS
14
GRINDER-RAILSWITCHDEBURRING
GRINDER-RAILPROFILESMALL
This rail profile grinder features guiding rollers which guarantee a fine grinding
from horizontal to vertical positions. Light yet rigid alloy frame. Safe to operate and
ergonomically designed.
Features
• Precisely controlled grindstone.
• Light alloy frame.
• Long roller base.
Product code 1050035
Length x Width x Height (mm) 1120 x 760 x 800
Weight 89kg
Power Robin diesel pull start
Benefits
• Safe.
• Comfortable to use.
• Ensures a first class reference for grinding.
Product code 1050158 1050158
Gauges (mm) 1435 1600
Length x Width x Height (mm) Various Various
Weight 99kg 99kg
Power Petrol Petrol
A switch grinding and deburring machine for 1435mm and 1600mm gauge rails, for
grinding welds on switch blades, crossing frogs, stock check rails. Offers the highest
grinding quality with a good view of the grinding area.
Features
• Grinding angle set by clamp
mechanism.
• Fail safe braking system fitted.
• Dustproof friction bearings.
• Also suitable for 1600mm gauge rails.
Benefits
• Wide working range.
• Highest grinding quality.
• Good view of grinding area.
GRINDER-RAILPROFILELARGE
A compact machine that is easily lifted onto track by two operatives. Powered by a
Honda® GX270 petrol engine, it is extremely efficient at grinding welds. Operators
stand upright and require very little effort to grind any rail weld to finish point.
Features
• Dead Man's Handle.
• The shell-type grindstone protections
pivot to suit either rail side.
• Fine grinding of the web includes the
transition onto rail foot and under rail head.
Benefits
• Requires very little effort from operator.
• Safe.
• Prevents 'hollow' grinding when set correctly.
Product code 1050036
Length x Width x Height (mm)
L - without foldable handles: 1500. With foldable handles: 1840
W - 570 H - 865
Weight Weight: 99.5kg Weight Outrigger: 25kg
Power 4-stroke-petrol engine
FROGGRINDER(INCLUDESRAILHYDRAULIC40LTRPOWERPACK)
Product code 9002823 9002419
Length x Width x Height (mm) 900 x 400 x 750 863.3 x 609.9 x 609.9
Weight 45kg 142kg
Power Hydraulic Diesel
The hydraulic profile grinder is a light weight, precision grinding machine. The grinder
is designed for finishing grinding of welds. The rollover feature makes ergonomic
grinding of the rail to the original profile easy. Using the detachable frog grinding
outrigger (with extension optional) is great for grinding the wing of the frog.
Benefits
• Lightweight.
• Multi-function.
• Quick set up.
• Precision grinding.
• Variable flow rate.
Features
• 40L Hydraulic power pack.
• Variable grind angle adjustments.
• 1200mm and 1800mm grinder work rails.
• Squat rails for grinding out defects in headstock of rail.
• Takes 4” cupstones and 8” grinding stones.
RAILGRINDERS
11. TRACKHANDTOOLS
TRACKHANDTOOLS
17
BALLASTFORK(WOODENHANDLE)
A steel headed, wooden handled ballast fork, used by railway operators to move
roadbed ballast, while allowing dirt to fall through the forks.
Features
• Steel head.
• Wooden handle.
• 2.7kg.
Benefits
• Portable.
• Easy to use.
• Lightweight.
Product code 1050114
Length x Width x Height (mm) 800 x 400 x 30
Weight 2.7kg
Power Manual
SWITCHBROOMWITHHANDLE
A sturdy switch broom to use for rail work on switch and frogs to remove snow, ice
and dirt to extend service life. Designed to work in all temperatures, in one rugged unit.
Features
• Polypropylene bristles.
• Lightweight.
• Use in all temperatures.
Product code 1050115
Length x Width x Height (mm) 1200 x 200 x 30
Weight 1.1kg
Power Manual
Benefits
• Extends service life.
• Durable.
• Portable.
STEELSHEETSHOVELWITHHANDLE
This multi-purpose steel sheet shovel is versatile and highly durable, with wooden
handle.
Features
• Steel sheet construction.
• Wooden handle.
• Ergonomic design.
Benefits
• Durable.
• Portable.
• Versatile.
Product code 1050125
Length x Width x Height (mm) 850 x 400 x 40
Weight 1.9kg
Power Manual
COLDCHISELWITHHANDLE
A 1.7kg head cold chisel with handle, used to cut rivets, to split nuts or bolts that
refuse to come loose.
Features
• 1.7kg head.
• Wooden handle.
• Hand Tool.
Product code 1050117
Length x Width x Height (mm) 350 x 50 x 50
Weight 1.7kg
Power Manual
Benefits
• Portable.
• Easy to use.
• Lightweight.
TRACKHANDTOOLS
16
ADZEWITHHANDLE
SLEDGEHAMMERINSULATED
DRIFTPUNCH
Drift punch with hickory handle, used as an aid in aligning bolts or rivet holes, prior
to inserting a fastener.
Features
• Hickory handle.
• 1.7kg.
• Use to align bolts or rivet holes.
Product code 1050111
Length x Width x Height (mm) 200 x 30 x 30
Weight 1.7kg
Power Manual
TAMPINGPICKWITHHANDLE
Product code 1050113
Length x Width x Height (mm) 900 x 70 x 70
Weight 4.2kg
Power Manual
Benefits
• Portable.
• Easy to use.
• Increases accuracy.
For heavy duty striking tasks where maximum safety is required. Strong polyfibre shaft
with excellent insulation and shock absorbency properties. Integrated hand stop helps
prevent the user's hand slipping onto the metal head.
Features
• Polyfibre shaft.
• Integrated hand stop.
• Insulated.
Product code 1050116
Length x Width x Height (mm) 850 x 50 x 50
Weight 1.5kg
Power Manual
Product code 1050124
Length x Width x Height (mm) 850 x 68 x 68
Weight 7.5kg
Power Manual
Benefits
• Maximum safety.
• Shock absorbent.
• Prevents users hand from slipping onto the
metal head.
Railroad adze, with an elongated blade head end. Designed to allow the blade to
come into contact with a railway sleeper earlier in the swing.
Features
• Elongated blade head.
• Steel blade.
• Wooden handle.
Benefits
• Extends service life.
• Durable.
• Portable.
A wide, flat headed pick used to drive ballast under railroad ties.
Features
• Wide flat head.
• Hand tool.
• 4.2kg.
Benefits
• Portable.
• Easy to use.
• Lightweight.
TRACKHANDTOOLS
12. 19
TURNINGBAREND53KGTO60KG
Rail turning bar for flat bottomed rails between 53kg to 60kg.
Features
• Steel construction.
• Suitable for 53kg - 60kg rail.
• For flat bottomed rails.
Benefits
• Durable.
• Portable.
• Versatile.
Product code 1050128
Length x Width x Height (mm) 1100 x 100 x 30
Weight 9.8kg
Power Manual
18
SPIKEPULLINGBAR
Pry up heavy timber or pull spikes with this steel spike pulling bar, designed for rail work and similar applications.
Features
• Steel.
• Fully forged.
• Approx 9.5kg.
Product code 1050122
Length x Width x Height (mm) 1200 x 150 x 30
Weight 9.5kg
Power Manual
Benefits
• Robust.
• Easy to use.
• Portable.
TURNINGBAREND47KGTO49KGNIPPINGBAR
This nipping bar has a flat plate attached at the head of the bar to give platform base
for leverage on rail ballast.
Features
• Flat plate attached at head of bar.
• Gives platform base for leverage on rail ballast.
• Steel construction.
Product code 1050119
Length x Width x Height (mm) 1800 x 150 x 30
Weight 8.2kg
Power Manual
Benefits
• Robust.
• Easy to use.
• Portable.
TRACKHANDTOOLS
TRACKHANDTOOLS
TRACKHANDTOOLS
TRACKHANDTOOLS
Rail turning bar for flat bottomed rails between 47kg to 49kg.
Features
• Steel construction.
• Suitable for 47 - 49kg rail.
• For flat bottomed rails.
Product code 1050129
Length x Width x Height (mm) 560 x 190 x 370
Weight 9.8kg
Power Manual
Benefits
• Durable.
• Portable.
• Versatile.
13. TRACKJACKS
TRACKJACKS
S 10T TOE JACK 22
LS 10T TOE JACK 22
21
Versatile, compact and robust, these 10 tonne hydraulic toe jacks are well-
suited to a range of applications. With minimal clearance required, get in
and under the rail. Allows you to effortlessly lift equipment or track.
20
TRACKHANDTOOLS
TRACKHANDTOOLS
LIFTINGTONGS(SLEEPERHANDLIFT)
A hand lift for manoeuvring timber sleepers for rail.
Features
• Hand lift.
• Handles a range of sleeper profiles.
• Robust steel construction.
Benefits
• Safe.
• Quickly picks up sleepers.
• Robust.
Product code 1050033
Length x Width x Height (mm) 570 x 40 x 800
Weight 5kg
Power Manual
SPIKINGHAMMER
The spike hammer is used for small maintenance and repair operations on rail track. A
specialised sledge hammer with a flat heavy head, designed to deliver a great amount
of force to the top of a rail spike.
Features Benefits
• Ergonomic design.
• Easily handled.
• Nupla handle.
• Narrow head for precision driving.
Product code 1050130
Length x Width x Height (mm) 900 x 70 x 300
Weight 5kg
Power Manual
PELICANPICK
Product code 1050120
Length x Width x Height (mm) 830 x 400 x 30
Weight 2kg
Power Manual
This quality, steel-headed pelican pick is designed to pick and scrape loose surfaces
and move loose ground materials in rail applications. Features hardened and tempered
point for strength and durability.
Features
• 2.5mm high quality steel head
bolted to handle assembly.
• Hardened and tempered point.
• Lacquer-sealed, premium hardwood handle.
Benefits
• Durable.
• Prevents splintering.
• Portable.
PIGSFOOTBAR
For removal of dog spikes on timber sleepers. Strong and durable.
Product code Short Long
Product code 1050121 9002635
Length x Width x Height (mm) 350 x 84 x 80 1800 x 60 x 60
Weight 4.5kg 7.5kg
Power Manual Manual
14. LIGHTING
LIGHTING
RAL CONFINED SPACE 24
RAL LED 7FT 24
RAL 4 HEADS 24
LINKLITE 24
GENERATORS 25
TRANSFORMERS 25
SOFT LIGHTS 26
23
Site safety is enhanced with the vast range of lighting solutions from
Kennards Hire Rail. Link lighting is a lighting system that allows up to
approx. 300m of linear lighting using a single 110V, 4kW generator. Ideal
for lighting up the rail corridor. Area soft lights produce a 360 degree
light dispersion which is telescopic and multi-directional. Portable LED
lights provide the perfect option in confined spaces.
TRACKJACKS
TRACKJACKS
JACK-TOE 10T(S)RAIL
JACK-TOE 10T(LS)RAIL
Product code 1050143
Length x Width x Height (mm) 572 x 5156 x 1524
Weight 26.3kg
Power Hydraulic with hand pump
Product code 1050144
Length x Width x Height (mm) 508 x 3937 x 1524
Weight 18.6kg
Power Hydraulic with hand pump
22
Features
• Exclusive overhead protection from load shifts.
• Solid cast base provides more surface contact area.
• Large grooved toe provides stable jacking.
• Inverted hard chrome piston design keeps water
and dirt out, extending jack life.
• Anti-kickback design, reduces risk of injury if load
is accidently released.
• Can lift from toe or cap.
Benefits
• Small and compact.
• Durable.
• Easily transportable by hand.
• Light weight.
Features
• Exclusive overhead protection from load shifts.
• Solid cast base provides more surface contact area.
• Large grooved toe provides stable jacking.
• Inverted hard chrome piston design keeps water
and dirt out, extending jack life.
• Anti-kickback design, reduces risk of injury if load
is accidently released.
• Can lift from toe or cap.
Benefits
• Small and compact.
• Durable.
• Easily transportable by hand.
• Light weight.
For lifting rail track.
For lifting rail track.
15. LIGHTING
LIGHTING
25
LIGHT-GENERATOR110V(SUITLINKLITEONLY)DIESEL
Powerful generator for the Linklite® system. Lights up to 280m and is suited to use in the rail corridor or with the Linklite 110V lighting
system for perimeter lighting. Petrol Diesel available. Steel construction with anti-vibration mounts.
Features
• Petrol Diesel versions available.
• Steel construction.
• Anti-vibration mounts.
• Meets Australian standards
Product code 9002146
Length x Width x Height (mm) 1850 x 969 x 1348
Weight 58kg
Power 4kW (5kVA)
Benefits
• Suitable for rail corridor work.
• Powerful.
• One generator provides 280m of light.
LIGHT-TRANSFORMERSTOSUITLINKLITE
Step down transformer can be used from generator or mains, hard wired and can run
up to 28 Linklite® or give 280m of light.
Features
• Meets Australian standards.
• Coverts 240V power to 110V
lighting requirements.
Product code 9002393
Length x Width x Height (mm) 430 x 360 x 500
Weight 50kg
Power Electrical
Benefits
• Can run off mains power 240V.
• Removes need for generator.
LIGHT-GENERATOR110V(SUITLINKLITEONLY)PETROL
This generator is suitable for use in the rail environment works with the Linklite® 110V
lighting system for perimeter lighting or within the rail corridor. Can light up 280m
from one generator. Petrol Diesel versions available.
Features
• For use with 110V Link Lite lighting system.
• Lights up to 280m from one generator.
• Use for perimeter lighting or within
rail corridor.
• Meets Australian standards.
Product code 9002095
Length x Width x Height (mm) 685 x 510 x 540
Weight 58kg
Power 4.0kW (5.0kVA)
Benefits
• Effective lighting from one generator.
• Powerful.
• Versatile.
LIGHTING
LIGHTING
24
LIGHT-RAILRALLED7FT
A remote area lighting system ideal for rail use, such as lighting rail access points,
walkways and work areas. Easily carried, quickly extended up to 7ft high and offers
considerable light coverage (2400 lumens) in areas where generator lights can't go.
Features
• Portable and lightweight.
• Extendable battery life up to 15 hours.
Benefits
• Easy to set up.
• Easily recharged - mains car.
• Variable power settings.
Product code 1050004
Length x Width x Height (mm)
L - Head Length: 200. Closed Length: 950.
W - Head W: 200. Closed W: 200. Deployed Dimensions 910
H - Deployed Dimensions: 2158.
Weight 7.3kg
Power Rechargeable batteries
LIGHT-RAILRALLEDKITFOURHEADS
Four powerful, telescopic, multi-directional LED Lights offering up to 7 hrs of peak
brightness with a variety of extended run times. Self contained, easy to transport and set
up. No exhaust, silent operation and offers up to 12,000 lumens of variable LED light.
Features
• Four swivelling telescoping LED light heads.
• Cool operating temperatures.
• No exhaust.
Benefits
• Regulate the intensity of the light.
• Easy ground transport.
• Versatile swivelling head design.
Product code 1050170
Length x Width x Height (mm)
L - Head L: 165. Closed L: 630. Retracted Cord L: 350
W - Head Width: 200. Closed Width: 497
H - Closed Height: 303. Extended Mast Height: 1850
Weight 47.17kg
Power Rechargeable batteries
LIGHT-RAILRALLED(PELICAN9430)
With 3000 lumens of brightness provides daylight lighting conditions for up to 10 hrs.
Tough design, ideal for confined spaces and is intrinsically safe. Features a telescopic,
multi-directional mast and 360 degree rotating LED head for extra flexibility.
Features
• 360 degree rotating LED head.
• 3000 lumens.
• 10 hrs run life.
Benefits
• Flexible and portable.
• Can be used hand held.
• Intrinsically safe.
Product code 1050005
Length x Width x Height (mm)
L - Head L: 165. Closed L: 400. Retracted Cord L: 350
W - Head Width: 200. Closed Width: 200.
H - Closed Height: 230. Extended Mast Height: 820
Weight 10.27kg
Power Rechargeable batteries
LIGHT-LINKLITE(SETOF7)
Set of 7 Linklites for use with the Linklite® generator - provides approx. 70m of
lighting. Offers improved light output and reliability and is an ideal choice for rail and
perimeter lighting. Great for residential areas, tunnels, bridge work and removes the
need for lighting towers.
Features
• 7 lights covers 70m.
• Watertight fittings.
• Easy tube replacement.
• Ability to run 28 lights to cover 280m.
Benefits
• Great for residential work.
• Ideal for tunnels and bridges.
• One generator can provide up to
280m of light.
Product code 9002096
Length x Width x Height (mm)
Pole Min - 1650, Max - 2840. Head - 730. Base - 450
Head - 280. Base - 500
Weight 8kg
Power Generator or mains
16. MATERIALHANDLING
MATERIALHANDLING
IRONMAN 28
LIFTING TONGS 28
HORIZONTAL RAIL BENDER 28
RAIL CLAMPS 29
TORQUE WRENCH 30
PUSH TROLLEY 700KG SWL 30
PUSH TROLLEY 1.2T SWL 31
PUSH TROLLEY 2T SWL 31
STRESSING ROLLERS 32
27
Add to site and personnel safety with specialised material handling
equipment from Kennards Hire Rail. Material hoists, rail clamps and lifting
tongs allow crews to lift, manoeuvre and precisely position rail lengths.
LIGHTING
LIGHTING
26
SOFTLIGHT(LED)
Features
• Aluminium extrusion designed for maximum convection cooling.
• 4 high density polyethylene lenses.
• 2.6kW operation giving a non blinding 360º light source.
• Weatherproof and durable IP66 rating cooled by a heat sink centre core which
doesn’t require fan cooling.
• Instant illumination, no warm up or cool down required.
Product code 280035
Length x Width x Height (mm) 2690 x 2630 x 9010
Weight 933kg - Unfuelled, 1050kg Fuelled
Power 5.5kVA auxiliary generator power
The soft light gives a non blinding 360° light solution for lighting rail corridors.
POWER LIGHT/SOFT LIGHT MODEL SHOWN (NOT LED)
17. MATERIALHANDLING
MATERIALHANDLING
29
CLAMPLONG50KG(BROWN)
These rail clamps are used for temporarily joining two rail ends securely with a tight
fit or for securing rail breaks. It features a compact design, is user friendly, safe and
enables traffic to pass over cut rail at slow speeds.
Features
• Only one rail clamp needed by rail joint.
• Enables traffic to pass over cut rail at slow speeds.
• Little maintenance required.
• Approved for temporary joining of rail joints.
• Annually certified.
Benefits
• Compact.
• Safe.
• User friendly.
• Fast application.
Product code 1050026
Length x Width x Height (mm) 190 x 280 x 130
Weight 21.5kg
Power Manual
CLAMPLONG53KGTO60KG(WHITE)
These clamps are used to temporarily connect two rail ends, utilising a fishplate (not
included). Can also be used for temporary repair to broken rail or weld, allowing slow
speed rail traffic to pass over. Calibrated torque wrench also available for use with clamps.
Features
• For flat-bottomed rails S 49, S 54 and UIC 60 as
well as for all similar rail profiles.
• Enables traffic to pass over cut rail at slow speeds.
• Approved for temporary joining of rail joints.
• Annually certified.
Benefits
• Compact.
• Safe.
• User friendly.
• Fast application.
Product code 1050027
Length x Width x Height (mm) 190 x 280 x 130
Weight 21.5kg
Power Manual
HORIZONTALRAILBENDER
A hydraulic rail bender for bending and straightening flat bottomed rails up to 60kg
and grooved rails up to 55kg. Features changeable claws and a lever action, resulting
in less cylinder effort and reduced weight. Easy to operate in any position.
Product code 1050153
Length x Width x Height (mm) 1150 x 1150 x 500
Weight 69kg
Power Hydraulic hand pump
Features
• Lever action.
• Powered by hand pump or
high pressure power pack.
• Changeable claws.
Benefits
• Easy to use.
• Easy to position on track with
lighter components.
• Less cylinder effort.
DRAGCLAMPS12TWLLINCLUDINGSHACKLES2MCHAIN
The 12T drag clamp is for fitting over the head of the rail and is a means of dragging
or pulling lengths of track.
Features
• Annually certified.
Product code 9002418
Length x Width x Height (mm) 2490 x 890 x 585
Weight 25kg
Power Manual
MATERIALHANDLING
MATERIALHANDLING
28
MATERIALHOIST-RAILIRONMAN1.5T
The ironman is designed to be used in pairs, for the lifting, transporting and transposing
of rail lengths, or parts of points and crossings. Requires two people for set up and is
easily dismantled for storage and transportation.
Features
• Strong construction.
• Able to move 110m of rail.
• SWL 1500kgs.
Product code 1050006
Length x Width x Height (mm) 1085 x 194 x 141
Weight 141kg
Power Manual
Benefits
• Easy to set up.
• Safe.
• Enables you to work in pairs.
LIFTINGTONGS3.3T
These 3.3T lifting tongs are used to handle and position rail using an excavator, or
similar. Opens automatically when lowered onto rail. Forged from high strength steel
with a 5x safety factor and designed to handle all rail profiles.
Features
• Automatically opens when lowered onto
head of rail.
• Forged from high strength alloy steel.
• Designed to handle all rail profiles.
• Annually certified.
Benefits
• Very safe and robust.
• Quickly picks up rail.
• Suitable for up to 68kg
rail.
Product code 1050031
Length x Width x Height (mm) 70 x 240 x 250
Weight 6.82kg
Power Manual
CLAMPLONG41KGTO47KG(BLUE)
These clamps are used to temporarily connect two rail ends, utilising a fishplate (not
included). Can also be used for temporary repair to broken rail or weld, allowing slow
speed rail traffic to pass over. Calibrated torque wrench also available for use with clamps.
Features
• Only one rail clamp needed per rail joint.
• Enables traffic to pass over cut rail at slow speeds.
• Little maintenance required.
• Annually certified.
Benefits
• Compact.
• Safe.
• User friendly.
• Fast application.
Product code 1050025
Length x Width x Height (mm) 190 x 280 x 130
Weight 21.5kg
Power Manual
LIFTINGTONGS5T
These 5T lifting tongs are used to handle and position rail using a wheel loader, or
similar. Opens automatically when lowered onto rail. Forged from high strength steel
with a 5x safety factor and designed to handle all rail profiles.
Features
• Automatically opens when lowered onto
head of rail.
• Forged from high strength alloy steel.
• Designed to handle all rail profiles.
• Annually certified.
Product code 1050032
Length x Width x Height (mm) 400 x 150 x 550
Weight 23.65kg
Power Manual
Benefits
• Very safe and robust.
• Quickly picks up rail.
• Suitable for up to 68kg
rail.
18. MATERIALHANDLING
MATERIALHANDLING
3130
MATERIALHANDLING
MATERIALHANDLING
TORQUEWRENCH
This 26kg light track rail trolley is designed for moving and transporting up to 700kg of materials on track. It is light-weight but sturdy,
with perforated aluminium plates with a slip resistant platform. No water or dirt accumulations.
Features
• Fail-safe breaking system and lightweight.
• No water or dirt accumulations
on bed due to perforated finish.
• Carrying handles at the sides.
• Suitable for Australian rail gauges.
• Annually certified.
For tensioning and removal of nuts.
Features
• Available in: ½ inch, ¾ inch, 1 inch, 1 ½ inch drives.
• Annually certified.
• Sockets available in various sizes.
Product code 1050012
Length x Width x Height (mm) 1940 x 1800 x (335 without handles) 150
Weight 26kg
Power Manual - push trolley
Product code 1011802
Size ¾ inch
Length x Width x Height (mm) 1100 x 100 x 60
Weight 6.2kg
Power Manual
Benefits
• Easy to carry.
• Easy to transport.
• Robust design.
• Nylon wheels.
This type B link trolley has been designed to be split into two halves to aid handling and transporting to and from site. Each trolley
is equipped with a fail-safe braking system and detachable brake and push handles.
Features
• Splits into two halves.
• Fail-safe braking system.
• Suitable for Australian rail gauges.
• Annually certified.
• Optional cage assembly also available.
Benefits
• Safe.
• Robust.
• Easier to transport.
PUSHTROLLEY-RAIL700KGSWL
A 1.2T, manually propelled link trolley. Use as a stand-alone load-bearing rolling platform on-track. Equipped with a fail-safe braking
system and supplied with detachable brake and push handles. Connect up to three link trolleys together.
Product name 1067mm Narrow Gauge 1435mm Standard Gauge 1600mm Broad Gauge
Product code 1005009 1050011 9002070
Length x Width x Height (mm) 800 x 1670 x (218 without handles)
Weight 57kg
Power Manual - push trolley
Product name 1067mm Narrow Gauge 1435mm Standard Gauge 1600mm Broad Gauge
Product code 1050010 1050013 310012
Length x Width x Height (mm) 1940 x 1800 x (335 without handles) 157
Weight 138kg
Power Manual - push trolley
Features
• Fail-safe breaking system.
• Detachable brake and push handles.
• Connect up to 3 together.
• Suitable for Australian rail gauges.
• Annually certified.
Benefits
• Heavy duty.
• Safe.
• Versatile.
PUSHTROLLEY-RAIL1.2TSWL
PUSHTROLLEY-RAIL2TSWL
19. 33
TAMPERSTENSORS
TAMPERSTENSORS
70T TENSOR 34
120T TENSOR 34
PETROL TAMPER 35
TAMPER/BREAKER ATTACHMENTS 36
33
Streamline rail track repair with the easily transportable hydraulic rail
tensor puller designed for stress relief of Continuous Welded Rails (CWR).
Operated primarily with a hydraulic power pack it is able to join and
maintain a constant gap between the two rail ends. Kennards Hire Rail
have two options available for you; 70T and 120T.
32
MATERIALHANDLING
MATERIALHANDLING
ROLLERFASTCLIPANDECLIP(STRESSINGROLLER)
The most productive and safest roller system in the world, the VSR reduces installation and removal time by 44%, replaces 3 pieces of
equipment with a single device and reduces manpower by 50%.
Features
• Supplied in stackable lightweight crates.
• More even stress distribution.
• Makes handling faster and safer.
• Suitable models for both eClip® and Fastclip®.
Benefits
• Reduces installation and removal time by 44%.
• Simplifies the process by replacing 3 pieces of equipment with a single device.
• Reduces manpower requirement by approximately 50%.
• Fast and simple to use.
Product name Mustard - eClip® Gold - Fastclip®
Product code 1050022 1050021
Length x Width x Height (mm) 150 x 15 x 40 200 x 15 x 20
Weight 2-3kg (For 60kg rail) 2-3kg (For 60kg rail)
Power Manual Manual
STRESSINGSIDEROLLER
Features Benefits
• For use in turnouts and curves.
• Suitable for Pandrol® eClips® and Fastclip® fasteners.
Product name Roller Fastclip® (side roller) Roller eClip® (side roller)
Product code 1050019 1050020
Length x Width x Height (mm) 200 x 150 x 210 150 x 150 x 210
Weight 1.3kg 1.3kg
20. TAMPERSTENSORS
TAMPERSTENSORS
35
TAMPERSTENSORS
TAMPERSTENSORS
34
COBRATT-TAMPER/BREAKER(P)
The Cobra TT is specifically designed for tie tampering. It is portable and its flexibility makes it a usual tool for track maintenance gangs.
The Cobra TT can also be used for spiking; as a tamper; or as a breaker.
Features Benefits
• Easy to transport.
• Quick setup.
• HAPS (Hand and Arm Protection System).
• Low emissions.
• Low noise.
• Multiple attachments, tamper tie, dog knocker, moils, asphalt cutter and drive pad.
Product code 1050041
Length x Width x Height (mm) 950 x 600 x 350
Weight 25kg
Power Petrol 2 stroke
70TTENSOR-WITHHYDRAULICPOWERPACK
Product code 1050045
Product Name
Tensor - Rail Hydraulic Power
Pack Hand Pump
Tensor - Rail 120T Clamp
Ram Assy
Length x Width x Height (mm) 850 x 610 x 670 2515 x 864 x 432
Weight 754kg (combined weight)
Power Petrol/diesel Hydraulic
Product code 1050044
Product Name Tensor - Rail Hydraulic Power Pack Hand Pump Tensor - Rail 120T Clamp Ram Assy 1.2MT
Length x Width x Height (mm) 650 x 470 x 540 2500 x 550 x 350
Weight 395kg (combined weight)
Power Petrol Hydraulic
This tensor set features a 4 stroke Honda® engine and is used to adjust the gap between rail ends for rail stressing, rail welding and
repairing rail. Quiet operation and 1.2 litre petrol tank capacity for longer operation.
Features
• Hydraulic assembly.
• Hoses are annually certified.
• Pulls apart for easy transportation.
• Stroke of jacks 380mm.
Benefits
• Quiet operation.
• Powerful.
• Versatile.
120TTENSOR-WITHHYDRAULICPOWERPACK
Used to adjust the gap between rail ends for rail stressing, rail welding and repairing
rail. Kennards Hire Rail have two models available The Matweld™ Geismar®.
Features Benefits
• The Matweld is a hydraulic actuated 120T rail tensor which comes in one piece, it
is lifted into position ready to go.
• It uses a dual circuit 40L hydraulic power pack (PGN9002419).
• The Geismar requires setting up as its components are assembled by clevis pins.
• Once in place it is obstruction less and therefore allows free running of trains.
21. DRILLS
DRILLS
DRILLS 38
SLEEPER DRILL 38
CRIMPER 38
HYDRAULIC PUMP 38
SIGNAL DRILL 39
37
Add to project efficiency with specialised drills from Kennards Hire Rail.
Petrol powered rail drill, sleeper drill and petrol powered signalling drill
complete with rail shoes and templates to achieve identical drill hole
diameters.
TAMPERSTENSORS
TAMPERSTENSORS
36
COBRATT-ATTACHMENTS
Product name Dog Knocker Tie Short Tie Long Tamping Stem Drive Pad
Product code 9002147 1050042 1050043 9002369 9002370
Length x Width x Height (mm) 350 x 80 x 80 400 x 100 x 40 580 x 100 x 40 235 x 40 x 30 180 x 180 x 30
Weight 3.5kg 4.5kg 5.0kg 3.6kg 7.5kg
Power Accessory Accessory Accessory Accessory Accessory
DOG KNOCKER TIE SHORT TIE LONG
TAMPING STEMDRIVE PAD
22. DRILLS
DRILLS
39
HYDRAULICPUMP(CEMBRERAILPRESS)
Suitable for installing electrical contact bush for railway industry applications.
Product code 9002071
Length x Width x Height (mm) 845 x 130 x 48
Weight 3kg
Power Hydraulic Manual
Features Benefits
• Simple operation.
• Carry handle.
DRILLS
DRILLS
38
DRILL-RAILPETROL
CRIMPERHYDRAULICHANDHELD12T
This is the world's most powerful and reliable 4-stroke petrol powered rail drill and is
specifically designed to drill rail at the centre of the web. Features a quill feed arbor
with through-the-tool cooling and 10 point clamping system.
Features
• Balanced handle.
• 4 stroke petrol motor.
• Quill feed arbor.
• Supplied with coolant bottle.
This manual 12T hydraulic crimper features a two stage rapid advance pumping
system and a jaw opening of 42mm to accept larger cables and connections. 8kg
in weight, 180 degree swivel head and twist handle pressure release for ease of use.
Features
• Twist handle release.
• Fibreglass handles.
• 180 degree swivel head.
• 16mm to 300mm dies available .
Product code 180109
Length x Width x Height (mm) 825 x 350 x 535
Weight 18.6kg
Power 4 stroke petrol
Product code 9002072
Length x Width x Height (mm) 200 x 110 x 750
Weight 8kg
Power Reservoir capacity 200 cc force at die face 118 kN
Benefits
• Easy to transport.
• Powerful motor.
• Cools bits.
• Complete in carry case.
DRILL-RAILPETROLSIGNALLING(CEMBRELD42-P)
A specialised drill for rail applications, allowing consistent holes to be cut into the rail. Comes with rail shoes templates to suit
application. Compact size saves time by allowing direct operation.
Product code 9002039
Length x Width x Height (mm) 600 x 25 x 450
Weight 19.5kg
Power 4-stroke-petrol engine 1kW
Features
• Compact size.
• Consistent 7mm holes.
• Rail shoes templates included.
• Suits up to 73kg rail.
• Timber drill bits in various sizes available.
Benefits
• Saves time.
• Improves accuracy.
• Ideal for one man operation.
DRILL-RAILSLEEPER
A powerful one man sleeper drill for drilling holes into timber sleepers, for the dog
and/or lock spikes. Lightweight construction and anti-vibration system.
Product code 1050038
Length x Width x Height (mm) 400 x 530 x 740
Weight Without Cutter 12.5kg
Power Petrol
Features
• Powerful 2-stroke motor.
• Light-weight.
• Extension shaft with trouser guard.
• Timber drill bits in various sizes available.
Benefits
• Work in areas where there is no
electrical power.
• Improve efficiency.
• Comfortable operation.
Benefits
• Larger jaw accepts larger connections.
• Durable.
• Portable.
23. PUSHTROLLEYS
PUSHTROLLEYS
41
Relocate essential equipment efficiently and effortlessly with Kennards Hire Rail
push trolleys. Light weight and robust with a slip resistant platform, the link
trolleys feature a fail-safe braking system with the ability to connect up to
three link trolleys together.
PUSH TROLLEY 700KG SWL 42
PUSH TROLLEY 1.2T SWL 42
PUSH TROLLEY 2T SWL 42
• Full service history
• Certificate of Test and Examination
• Operator’s manual
• Risk assessment
• Pre-delivery checklist
• Online operator safety checks
• User guide
• Equipment videos
• Maintenance schedule
• Insurance details
• Safety alerts
BE IN THE KNOW
WITH QR CODESA FIRST FOR THE HIRE INDUSTRY
What’s more, now ‘Online Operator Safety Checks’
can be recorded straight into the Plant Portal itself.
On-site or Off-site you have instant access to all the
right information. QR codes are an industry first, and
are just one way we try and make your job easier!
40
A lot of work goes on in the background to make a
piece of equipment 'Ready For Hire'. Scanning the QR
code with your handheld device or your desktop and
using the plant number as reference, you gain access
to valuable information relating to that particular piece
of equipment via the Kennards Hire plant portal.
Enter the equipment’s plant number into
www.kennards.com.au/plantportal, or scan the QR
code on it’s Ready for Hire label, and you’ll get the
inside scoop on it’s:
24. WELDSHEARS
WELDSHEARS
SHEARS LIGHT RAIL 44
SHEARS HEAVY RAIL 44
SHEARS CRANE RAIL 44
43
Our weld shears, which come complete with hand pump and blades,
are lightweight and highly efficient with a spring centred flow control
valve that permits safe and precise shearing of an aluminothermic weld.
Correctly applied the adjustable hold downs are self-locking and will
assure a safe clean cut.
PUSHTROLLEYS
42
PUSHTROLLEY-RAIL700KGSWL
This 26kg light track rail trolley is designed for moving and transporting up to 700kg
of materials on track. It is light-weight but sturdy, with perforated aluminium plates
with a slip resistant platform. No water or dirt accumulations.
Features
• Fail-safe breaking system and lightweight.
• No water or dirt accumulations
on bed due to perforated finish.
• Carrying handles at the sides.
• Suitable for Australian rail gauges.
• Annually certified.
Product code 1050012
Length x Width x Height (mm) 1940 x 1800 x (335 without handles) 150
Weight 26kg
Power Manual - push trolley
Benefits
• Easy to carry.
• Easy to transport.
• Robust design.
• Nylon wheels.
PUSHTROLLEY-RAIL2TSWL
This type B link trolley has been designed to be split into two halves to aid handling
and transporting to and from site. Each trolley is equipped with a fail-safe braking
system and detachable brake and push handles.
Features
• Splits into two halves.
• Fail-safe braking system.
• Suitable for Australian rail gauges.
• Annually certified.
• Optional cage assembly also available.
Benefits
• Safe.
• Robust.
• Easier to transport.
PUSHTROLLEY-RAIL1.2TSWL
A 1.2T, manually propelled link trolley. Use as a stand-alone load-bearing rolling
platform on-track. Equipped with a fail-safe braking system and supplied with
detachable brake and push handles. Connect up to three Link Trolleys together.
Product name 1067mm Narrow Gauge 1435mm Standard Gauge 1600mm Broad Gauge
Product code 1005009 1050011 9002070
Length x Width x Height (mm) 800 x 1670 x (218 without handles)
Weight 57kg
Power Manual - push trolley
Product name 1067mm Narrow Gauge 1435mm Standard Gauge 1600mm Broad Gauge
Product code 1050010 1050013 310012
Length x Width x Height (mm) 1940 x 1800 x (335 without handles) 157
Weight 138kg
Power Manual - push trolley
Features
• Fail-safe breaking system.
• Detachable brake and push handles.
• Connect up to 3 together.
• Suitable for Australian rail gauges.
• Annually certified.
Benefits
• Heavy duty.
• Safe.
• Versatile.
PUSHTROLLEYS
25. WELDINGEQUIPMENT
WELDINGEQUIPMENT
ALUMINOTHERMIC WELDING SYSTEM 46
WELDER RAIL KIT 46
A FRAME ALIGNERS 47
WELDING TENT 47
STRAIGHT EDGE 47
45
Railtech Thermit weld kits available from Kennards Hire Rail can be
pre-loaded onto vehicles along with other requested equipment and be
ready to drive out as a weld truck tailored to customer requirements. Ask
us about our ‘tick ’n’ flick’ sheets for Light and Heavy Rail applications.
WELDSHEARS
44
WELDSHEARS
Weld shear for shearing of aluminothermic welds. Capable of shearing the weld and the mould in one continuous pass.
Features
• 30-45 seconds to shear a weld.
• Adjustable hold downs are self locking.
• Include blades.
Note: Any crane rail above 115mm head width speak to your local branch.
Type Product code Rail Size or Head Width
Light Rail Check with your Rail branch Blades shear to a max. 120mm rail head width
Heavy Rail 1050139 Blades shear rail 31kg to 60kg
Crane Rail 9002074 Blades shear to a max. 115mm rail head width
Benefits
• Ensures a safe cut.
• Saves time.
• Efficient one-pass cuts.
WELDSHEARS
26. 47
WELDINGEQUIPMENT
WELDINGEQUIPMENT
WELDERRAILKIT
The Railtech® welding kit is a complete solution for welding rail ends (excl. gas/
consumables). Molten steel (a product of iron oxide and aluminium reacting) is cast at
temperatures exceeding 3500F, to complete an aluminothermic weld in under 15 mins.
Features
• Both Railtech and Thermit® brands.
• All hardware required to carry
out welding of rail track.
• Annually certified regulators.
Product code 1050055 Railtech® 9002930 Thermit®
Length x Width x Height (mm) 1150 x 1150 x 800 1150 x 1150 x 800
Weight 80kg 80kg
Power Various Various
Benefits
• Recognised and approved process within
rail sector.
• Easily portable.
46
WELDINGEQUIPMENT
WELDINGEQUIPMENT
WELDER-ESABRAILTECHWELDINGSYSTEM
The Railtrac™ BVR100 welding system is light-weight making it easy to manoeuvre and position around the track.
Features Benefits
• Ideal for frog and switch repairs.
• Ideal for squat repairs and hard facing.
• Programming weld patters.
• Adjustable to many facets of rail.
• Training available.
Product code 9002405
Length x Width x Height (mm) 1150 x 1150 x 800
Weight 50kg
Power Max 80 Watt
AFRAMEALIGNERS
Ensures accurate twist and lateral alignment of rail ends and guarantees quality
thermic welding. An A frame aligner is set on each side of the weld on the second
sleeper. Suitable for all kinds of flat bottom rails.
Features
• Heavy duty construction.
• Light weight.
• Alloy A-Frame Aligners.
Product code 1050056
Length x Width x Height (mm) 570 x 160 x 600
Weight 18kg
Power Manual
Benefits
• Allows exact alignment of rails.
• Eliminates twist.
• Welds quickly and reliably.
• Removes need for wedges.
WELDER-WELDINGTENT
Reinforced PVC, track welding tent. Protects welders from inclement weather. Fabric
is ideally weighted for stability and strength in operation, versus other lighter products
which are prone to being blown away.
Features
• No loose components.
• Under rail poles.
• Set up in minutes.
Benefits
• Maintain productivity in poor
weather.
• Enhanced safety for public.
• Easy set up.
Product code 1050173
Length x Width x Height (mm) 2500 x 2500 x 2000
Weight 23kg
Power Not applicable
STRAIGHTEDGE1M(0.5MMAND1.8MM)
This item is used to check track rail from any deflections before and after welding.
Features
• Annually calibrated.
Product 1m straight edge with cut out
Product 1m straight edge with 0.5mm nib
Product 1m straight edge with 1.8mm nib
Product code 9002374
Product code 9002649
Product code 9002648
27. 49
NOTES
NOTES
TRAINING
COMPETENCY
TRAINING IS THE KEY TO SUCCESS IN
ANY ORGANISATION.
48
In conjunction with Kennards Hire Rail, GoTrain work
closely with the Rail industry to offer training on our entire
equipment range.
In line with legislative requirements, for rail operatives to
be competent in the use of equipment, this nationally
recognised training will take place at our Specialist Branches
by arrangement, under the umbrella of an RTO and by a
qualified trainer/assessor.
To support the lifestyles of rail operatives our courses can
be offered online and/or face to face and are varied to
ensure we provide the right rail industry knowledge.
Examples of courses available include:
• Training on clipping equipment
• Training on rail saws, drills and impact wrenches
• Manual handling and hand tools training
• Rail Industry Welding
• Cert. II in Rail infrastructure
• Cert. III in Rail Infrastructure
If you would like further information on training or
competency tickets: Contact your local branch or email
to: railtraining@kennards.com.au
28. LIFT
SHIFT
It’s true many hands make light work, but our
equipment can make it even lighter. Whatever the
job, whether it’s a small project at home or a large
commercial construction, we’ve got the tools to
help you do it.
Visit our Lift Shift branch to pick up everything
from stair trolleys and skates, hoists, conveyors
and glass handlers, to 30 tonne chain blocks,
winches, cranes and even self-contained breathing
and safety equipment.
CONCRETE
CARE
Concrete’s tough, but we can certainly make it
easier to work with. Our Concrete Care Branches
hire out equipment for residential, industrial
and commercial concrete surface preparation,
cleaning, repair and maintenance. We also stock a
wide range of diamond products.
So if you’re getting up to any concrete cutting,
sawing, drilling, cleaning, demolition, placement or
surface preparation, there’s only one place to go.
51
THE CENTRES
OF ATTENTION
Our specialist branches are the place to go for more
specialised and specific hire equipment. And as a
matter of course, all our equipment is backed by
24/7 service and support and on-site delivery.
5050
29. WE’LLMAKE
IT HAPPEN
If you think your job is our number one priority,
you think wrong. The most important thing to us
is your safety. That’s why our equipment comes
with safety accessories and/or a Kennards Hire
personal protection pack.
When you hire something, we’ll be sure to give
you all the details on how best to use it. And when
you return it, we’ll put it through our extensive
servicing and maintenance procedure. So you’ll
not only know how to use our equipment, but
that it’ll be in perfect working condition, too.
53
TEST
MEASURE
We don’t have to tell you how important testing
and measuring is, even Santa checks his list twice.
Kennards Hire Test Measure is our newest
specialist offer with an extensive range of testing,
safety and data analysis solutions.
Our team of industry experts provide customers
in the oil gas and mining industry, sewer and
water mains construction, electrical data and
communications and plumbing industries with
innovative and leading-edge test and measurement
equipment.
We know how important the little things are. This
gear can be complicated and technical. But our
team will help you down to the finest of details,
andmake your job easy.
TRAFFIC
Bad traffic can have the same affect on a work
site as it does on a road – it’ll stop you getting
anywhere. So before that happens, take a trip to a
Kennards Hire Traffic Centre.
Set up to meet the needs of civil and government
construction, roadwork and local council projects,
you can hire everything you need to create a safe
and organised work zone.
Think attenuators, VMS message and arrow
boards, pedestrian and traffic barriers, safety and
directional signs, cones, road plates, portable light-
ing towers and self powered solar traffic signals.
Finding the job draining? Or maybe you’re out of
energy? Just head into a Kennards Hire Pump
Power branch. There you’ll find generators ranging
from the compact and portable to the silent and
powerful, all the way from 20kVA up to 1250kVA.
We carry distribution boards, leads, cable ramps
and stands, too.
You can also hire a broad selection of sludge, slurry,
drainage, contractor and submersible pumps.
Durable, dependable, and suitable for everything
from waste to fresh water, our pumps are perfect
for the building, construction, mining, agricultural,
municipal and marine industries. What’s more,
we can get them to you no matter where you
are in Australia.
PUMP
POWER
52
30. A NETWORK THAT WORKS
CAN’TVISITUS?
THEN WE’LL
COME TO
YOU
Kennards Hire Site Solutions (KHSS) is an onsite
hire equipment management solution for planned
shutdowns and or project critical path works.
Drawing on over 65 years of experience in the
hire industry, the KHSS team will partner with
any project that requires tailored packages for
shutdowns or planned maintenance.
The purpose-built tool stores on site can be
manned by Kennards Hire Staff if needed and
operational 24/7, complete with specialist tooling
and equipment specific for any scope of works.
We’ve all been there. You need another machine
to do the work, but you can’t justify buying one.
Or you’re in the middle of the job, and your tool
decides to call it quits. That’s why we’re
here – and it’s why so many professionals
just like you hire from us every day.
You don’t have to go far.
Our branches are all over Australia –
and we’re still opening more. We’ve
even got thirteen branches in NZ
– nine in Auckland, one in Wellington
and three in Christchurch. So no matter
where you’re working, we’re bound
to be close by.
WE’VE ALL
BEEN THERE.
55
BETREATED
LIKEFAMILY
EASY
We see our customers as part of the Kennards Hire
family. And everyone knows that family comes
first. From fully understanding your needs and
greeting you with a smile, to getting an urgent
delivery to your site or giving you after hours help,
we’ll never let you down.
And of course, family members can be honest
with each other. So if there’s anything you think
we can work on, we’re all ears.
ACCESS 24/7.
32. Kennards recommends the use of safety equipment
at all times. No further liability can be taken.
TRANSPORT
SAFETY LEGENDS
Hard/Safety hat
Appropriate/Suitable eye protection
Appropriate/Suitable protective mask
Operator may require workcover
certification
Operator may require calibration
certification
Operator may require Australian
drivers licence to operate
Protective gloves
Safety harness
Suitable protective clothing
Hearing protection
Earth leakage unit
Heavy use lifting aid
Gas monitor required
Laser in use
Car
Station wagon
Will tow behind car
Ute
Truck
Will tow behind truck
Truck with tilt tray
We’ll deliver or use your own truck