Jesse Draper_Resume_191115
•Download as DOCX, PDF•
1 like•97 views
Jesse Draper has over 5 years of experience in mechanical engineering and product development. He has worked as a product development engineer at Ford Motor Company since 2015 where he tests hybrid powertrains and verifies software functionality. Previously, he held internships at Volvo Powertrain/Mack Truck where he designed test equipment, assisted with cost improvement projects, and executed vehicle tests. Draper also has experience in entrepreneurship, racing formula cars, and starting his own 3D printing design service company. He is proficient in various engineering software programs and coding languages.
Report
Share
Report
Share
Recommended
Cody Litzenberg Resume
Cody Michael Litzenberg is seeking a design engineering position where he can contribute to a company's mission while expanding his engineering and leadership skills. He has over 5 years of experience as a Design/Process Engineer at Subaru of Indiana Automotive where he led new car model launches and ensured vehicle accuracy. As a co-op, he completed impactful projects at Harley-Davidson and Therma-Tru Door Company, obtaining problem-solving certifications. Litzenberg holds a B.S. in Mechanical Engineering from Purdue University Fort Wayne and specialized training from the United States Marine Corps where he achieved the rank of E-5.
Noreen Resume 9-19-16
Trenton Noreen is a skilled design engineer with over 10 years of experience designing heavy equipment transmissions and drive trains at Caterpillar, Inc. He has extensive experience leading projects, developing innovative processes, and collaborating across departments. Noreen has competency in various design software and has a Bachelor's degree in Mechanical Engineering. Throughout his career at Caterpillar, he has been responsible for designing and testing new transmission components and systems, resolving issues to improve efficiency and reduce costs.
Resume_NingLiu_VD
Ning Liu is seeking a full-time position as a Vehicle Dynamic Engineer with over 5 years of experience in vehicle suspension systems, hydraulic hybrid powertrain design and simulation, and CAD design. He has a Master's degree in Mechanical Engineering from Purdue University and Bachelor's degree in Vehicle Engineering from Hunan University. His experience includes generating vehicle dynamic models in Matlab/Simulink, designing hydraulic systems, and leading a suspension team for Formula SAE competitions.
Gokula_Gopinath_Resume
Gokul Gopinath is a mechanical engineer with over 13 years of experience in automotive design and development. He currently works as a Technical Lead at Geometric Ltd. in Bangalore, where he manages projects from concept to launch. Previously he has worked for companies like American Axles, Dana India, Anz International, and Sakthi Auto Components in roles like senior product engineer, project leader, and design engineer. He has expertise in areas like vehicle integration, driveline technology, product design, analysis, testing and validation.
Accenture - Aug 2015
This career profile summarizes the experience of a Solution Architect and Build Lead with expertise in data migration, ETL solution design, and technical documentation. Over a 10 year career, roles have included Siebel consultant, application designer, team lead, change request manager, and senior developer working on CRM, billing, and telecom projects. Technical skills include Oracle, Siebel, PL/SQL, EIM, and Ab Initio. Responsibilities have involved requirement gathering, solution design, code development, testing, and ensuring high quality deliverables.
Resume-Shrikant Kumbhar-2
This document provides a professional profile for Shrikant Kumbhar, summarizing his 27+ years of experience in vehicle design and development. It outlines his responsibilities managing new product development projects, including body-in-white structure and chassis design. It also lists his skills in areas like styling reviews, vehicle layout preparation, component costing, and digital mockup systems. His career history includes roles at various automotive companies, and he has extensive experience leading projects and coordinating cross-functional teams.
Robert Slevnik Resume' 2016
Robert Slevnik has experience with CAD design, CNC machining, and manufacturing engineering. He received a Bachelor's degree in Mechanical Engineering Technology from Purdue University Calumet where he specialized in CAD programs like SolidWorks. As president of Purdue's SAE Baja team, he led the engineering and fabrication of an all-terrain vehicle. He has worked as a manufacturing engineer and engineering instructor/lab supervisor developing products, improving processes, and assisting with student design projects.
Akant SAP ABAP Technical Architect
Akant Tewari has over 8 years of experience in SAP ABAP development and technical architecture. He has worked as a delivery coordinator, technical architect, and SAP PLog MM-WM technical lead. Some of his responsibilities have included preparing technical designs, developing custom ABAP solutions, managing teams, and providing guidance to clients. He has successfully delivered several SAP projects and solutions for companies like Nestle, Cepheid, and Teva.
Recommended
Cody Litzenberg Resume
Cody Michael Litzenberg is seeking a design engineering position where he can contribute to a company's mission while expanding his engineering and leadership skills. He has over 5 years of experience as a Design/Process Engineer at Subaru of Indiana Automotive where he led new car model launches and ensured vehicle accuracy. As a co-op, he completed impactful projects at Harley-Davidson and Therma-Tru Door Company, obtaining problem-solving certifications. Litzenberg holds a B.S. in Mechanical Engineering from Purdue University Fort Wayne and specialized training from the United States Marine Corps where he achieved the rank of E-5.
Noreen Resume 9-19-16
Trenton Noreen is a skilled design engineer with over 10 years of experience designing heavy equipment transmissions and drive trains at Caterpillar, Inc. He has extensive experience leading projects, developing innovative processes, and collaborating across departments. Noreen has competency in various design software and has a Bachelor's degree in Mechanical Engineering. Throughout his career at Caterpillar, he has been responsible for designing and testing new transmission components and systems, resolving issues to improve efficiency and reduce costs.
Resume_NingLiu_VD
Ning Liu is seeking a full-time position as a Vehicle Dynamic Engineer with over 5 years of experience in vehicle suspension systems, hydraulic hybrid powertrain design and simulation, and CAD design. He has a Master's degree in Mechanical Engineering from Purdue University and Bachelor's degree in Vehicle Engineering from Hunan University. His experience includes generating vehicle dynamic models in Matlab/Simulink, designing hydraulic systems, and leading a suspension team for Formula SAE competitions.
Gokula_Gopinath_Resume
Gokul Gopinath is a mechanical engineer with over 13 years of experience in automotive design and development. He currently works as a Technical Lead at Geometric Ltd. in Bangalore, where he manages projects from concept to launch. Previously he has worked for companies like American Axles, Dana India, Anz International, and Sakthi Auto Components in roles like senior product engineer, project leader, and design engineer. He has expertise in areas like vehicle integration, driveline technology, product design, analysis, testing and validation.
Accenture - Aug 2015
This career profile summarizes the experience of a Solution Architect and Build Lead with expertise in data migration, ETL solution design, and technical documentation. Over a 10 year career, roles have included Siebel consultant, application designer, team lead, change request manager, and senior developer working on CRM, billing, and telecom projects. Technical skills include Oracle, Siebel, PL/SQL, EIM, and Ab Initio. Responsibilities have involved requirement gathering, solution design, code development, testing, and ensuring high quality deliverables.
Resume-Shrikant Kumbhar-2
This document provides a professional profile for Shrikant Kumbhar, summarizing his 27+ years of experience in vehicle design and development. It outlines his responsibilities managing new product development projects, including body-in-white structure and chassis design. It also lists his skills in areas like styling reviews, vehicle layout preparation, component costing, and digital mockup systems. His career history includes roles at various automotive companies, and he has extensive experience leading projects and coordinating cross-functional teams.
Robert Slevnik Resume' 2016
Robert Slevnik has experience with CAD design, CNC machining, and manufacturing engineering. He received a Bachelor's degree in Mechanical Engineering Technology from Purdue University Calumet where he specialized in CAD programs like SolidWorks. As president of Purdue's SAE Baja team, he led the engineering and fabrication of an all-terrain vehicle. He has worked as a manufacturing engineer and engineering instructor/lab supervisor developing products, improving processes, and assisting with student design projects.
Akant SAP ABAP Technical Architect
Akant Tewari has over 8 years of experience in SAP ABAP development and technical architecture. He has worked as a delivery coordinator, technical architect, and SAP PLog MM-WM technical lead. Some of his responsibilities have included preparing technical designs, developing custom ABAP solutions, managing teams, and providing guidance to clients. He has successfully delivered several SAP projects and solutions for companies like Nestle, Cepheid, and Teva.
DINESH GAUR RESUME CAD DESIGNER MECHANICAL1
Dinesh Kumar Gaur has over 25 years of experience in mechanical draughting for power projects. He is currently a Senior Designer at General Electric where he is responsible for designing equipment layouts, piping diagrams, and plant layouts using AutoCAD and other specialized software. Prior to GE, he held draughting and design roles at various engineering companies such as Alstom India Limited, Triveni Engineering, and The Indure Private Limited. Gaur has a diploma in mechanical engineering as well as draughting certifications and is proficient in AutoCAD, AUCOPLAN, EMS, PDMS, Adobe Standard, and COMOS.
Punya_Resume
Punyasloka Rout is a mechanical design engineer with over 9 years of experience in designing exhaust and cooling systems for automobiles. He is currently a senior design engineer at Tata Technologies. Some of his responsibilities include developing exhaust system designs, creating 2D drawings and 3D models, coordinating with suppliers and clients, and leading teams of engineers. He has a BE in Mechanical Engineering from North Odisha University and has worked for several automotive companies in both India and Germany.
Pradeep Kumar C resume
Pradeep Kumar C is seeking a position in design and analysis with his 5 years of experience in the field. He has worked at QuEST Global as both a senior engineer and consultant. Previously, he was deputed from Sheeba Computers to Aeronautical Development Agency. He has extensive experience with CAD software including UG NX, Team Centre, Catia V5, Enovia, and AutoCAD. Some of his project experience includes cost optimization of wind turbine components, modeling and drafting of locomotive parts, optimization of design drawings for fuel system components, qualification testing of fuel system parts, and analysis of a transfer system to meet naval aircraft requirements. He has a B.E. in Mechanical Engineering with 73
Gradent solftware
The document describes software designed by Christopher Russell to help driverless cars select the optimal gear for upcoming hills by detecting the gradient of the terrain. The software analyzes map and sensor data to determine the hill's grade and automatically changes the car's gearing accordingly to improve fuel efficiency. It aims to fulfill customer needs for efficient driverless vehicles by linking its ability to adjust gearing based on terrain to savings on petrol.
Varun Kumar-Design Engineer_new
Varun Kumar is a mechanical engineer with experience in automotive engine design and product development seeking a design engineer position. He has a Master's degree in Mechanical Engineering from Clemson University and a Bachelor's from Birla Institute of Technology in India. His past work includes internships at ZF Transmissions identifying waste management solutions and problem solving issues. He previously worked at Mahindra and Mahindra on engine design projects, achieving cost reductions and optimizing components through value engineering. His technical skills include CAD, FEA, optimization and other engineering software. He has led several academic and industrial design projects focused on engine components.
Ben Herzog Resume
Benjamin Herzog is seeking a mechanical engineering position and has a BS in Mechanical Engineering from Michigan Technological University with a 3.87 GPA. He has internship experience at Manitowoc Cranes and MI-Tech Services performing engineering tasks such as design work, stress analysis, modeling, and technical drawings. At Michigan Tech, he was involved in projects including designing cars for supermileage competitions and an avalanche rescue robot. He has leadership experience through honor societies and as chief financial officer of the supermileage team.
Karthik Resume NPD
This document is a resume for M V Sai Karthik summarizing his professional experience and qualifications. He has over 3 years of experience in new product development, fabrication process, and production engineering. Some of his responsibilities include design reviews, coordinating production trials, maintaining quality documents, and ensuring project milestones are met. He has received several awards for his work and undergone relevant training programs. Currently he works as a Line Leader for new product development at Tata Toyo Radiator Ltd. in Pune, India.
Resume_Inthiyaz_02AUG2016
This document provides a summary of a product engineer with over 8 years of experience in automotive seating and interior components design. Key responsibilities include mechanical design, project management, tolerance analysis, and supporting products from concept to mass production. Strengths include CAD skills in CATIA V5 and experience in various technical areas such as sheet metal processing, tolerance stackup analysis, and regulatory compliance.
Nitin Mandloi
Mr. Nitin Mandloi has over 4 years of experience in vehicle integration and aggregates. He currently works as an Assistant Manager at International Tractors Ltd, where he is responsible for vehicle integration tasks such as layout preparation, design coordination, testing, and issue resolution. Previously he has worked on vehicle integration projects for companies like Hi-Tech Gears and Param Technologies. He has expertise in CAD tools like NX, Pro/E, CATIA, and SolidWorks as well as PDM/PLM systems. He holds a Bachelor's degree in Mechanical Engineering.
RichardStephensResume2
Richard S. Stephens is an engineering professional with over 25 years of experience in drafting, engineering design, checking, and analysis in the manufacturing industry. He currently works as a Checking Analyst at Caterpillar, Inc. where he checks and releases drawings and ensures compliance with engineering standards. He has expertise in various design, analysis, and CAD software and focuses on project management, product improvement, and cost reduction initiatives.
resume
Julianne Lumadilla is seeking a CAD operator position and has experience in that role at Modern Tech and Design Publication. She has a Bachelor's degree in Industrial Technology majoring in drafting. Her responsibilities as a CAD operator included generating technical drawings using AutoCAD, drafting and plotting conceptual plans, organizing and maintaining files for facilities and projects. Currently she works monitoring and validating inventories at Universal Paint H-chem Industries.
Resume_Yin_Xia
Yin Xia has over 10 years of experience in the automotive industry working for General Motors and Alpine Electronics of America. He is currently an Assistant Program Engineering Manager at GM, where he is responsible for major engineering projects and issue resolution. Previously, he held positions in manufacturing engineering, design, and project engineering. Xia is pursuing his MBA from Oakland University.
Resume Mm Brach Chronological 8.0
Margaret Brach has over 25 years of experience as a project manager and engineer in the automotive industry. She has managed numerous product development programs from design through launch across multiple companies, including Ford, Mazda, and CODA Automotive. Her skills include program management, engineering analysis, team leadership, quality control, and continuous process improvement. Brach holds a BS in Mechanical Engineering and is working towards an MS in International Administration.
Prabhakaran T
Prabhakaran T is a mechanical engineer with over 2 years of experience in automotive technical publication and design. He is currently working as an Animator & Technical Illustrator at Sree Krishna Power Engineering & Consultancy Pvt Ltd, where he creates repair manuals, maintenance manuals, and 3D repair animations for clients such as Mahindra & Mahindra. Prior to this, he worked as an Application Engineer at SIM Technologies Private Ltd, where he designed parts and assemblies using SOLIDWORKS and generated technical documentation. He holds a B.E. in Mechanical Engineering and is proficient in software such as CATIA Composer, SOLIDWORKS, Adobe Illustrator, and Arbor
Ermias e lemma resume 5 17-15
Ermias E. Lemma is seeking a mechanical engineering position. He has a Bachelor's degree in Mechanical Engineering from the University of Kentucky. During his studies, he completed four engineering internships in manufacturing, HVAC design, and research. His experience includes mechanical design, manufacturing engineering, HVAC design using various software programs. He also has leadership experience through involvement with student organizations like NSBE where he held various officer positions planning programs and events.
Planas Resume
Raymond Planas is a mechanical engineer with experience in HVAC design, solar PV design, and CAD drafting. He has a bachelor's degree in mechanical engineering from UNLV with a GPA of 3.64. He is proficient in various engineering software programs and holds a Nevada Certified Engineer Intern certification. Planas seeks to utilize his diverse skills and quality focus as a mechanical engineer.
1 17 W Flynn Resume
William Flynn has over 30 years of experience in engineering, quality management, and project management. He has held roles at several major companies including ATCO, Swagelok, General Motors, Delphi, and the United States Census Bureau. He has a background in quality control, process improvement, product launches, and overseeing teams.
Resume
Srinivas Kumar has over 11 years of experience in design engineering, product development, research and development. He has expertise in Pro-E, CREO, Ansys and AutoCAD. Some of his projects include cylinder block and cylinder head design, turbocharger component design, and lubricating oil pump design for diesel engines. He is looking for a senior level role in design engineering or product development, preferably in the automobile industry.
Resume_Linkedin
Shashank Johari is seeking a position as a construction manager. He has a Masters in Civil Engineering from Texas A&M University and a Bachelors in Civil Engineering from Maulana Azad National Institute of Technology in India. His resume outlines professional experience including internships with Walt Disney Imagineering, Ansal Properties and Infrastructure Ltd, Madhya Pradesh Road Development Corporation, and Larsen & Toubro Construction Division. He provides details on the size, budget, and schedule of each project. Shashank also lists technical skills with scheduling, estimating, and BIM software, as well as leadership positions held and academic projects completed.
resume
Matthew Jacob Sowa has over 5 years of experience as a product engineer designing and testing suspension and powertrain components for military vehicles. He has held product engineer roles at Loc Performance Products and TRW Automotive where he designed components, tested designs, and incorporated feedback to improve designs. Sowa has a B.S. in Mechanical Engineering from Oakland University and a B.A. in Physics and Mathematics from Albion College.
Jurnet Anthropometri Gelombang 2 2014
Dokumen ini berisi daftar 10 judul jurnal internet tentang ergonomi dan perancangan sistem kerja yang direkam di Laboratorium Ergonomi dan Perancangan Sistem Kerja. Jurnal-jurnal tersebut berasal dari tahun 2013 hingga 2014 dan terkait dengan modul antropometri reguler dan ekstensi serta program studi gelar II.
Fases del proceso tecnológico
El documento describe las 6 fases del proceso tecnológico: 1) búsqueda de información, 2) diseño, 3) planificación, 4) construcción, 5) verificación y evaluación, 6) divulgación. En la fase de búsqueda de información se busca información escrita, oral o a través del análisis de objetos tecnológicos. En la fase de diseño se realizan bocetos y planos del diseño elegido. La fase de planificación implica listar los materiales, herramientas
More Related Content
What's hot
DINESH GAUR RESUME CAD DESIGNER MECHANICAL1
Dinesh Kumar Gaur has over 25 years of experience in mechanical draughting for power projects. He is currently a Senior Designer at General Electric where he is responsible for designing equipment layouts, piping diagrams, and plant layouts using AutoCAD and other specialized software. Prior to GE, he held draughting and design roles at various engineering companies such as Alstom India Limited, Triveni Engineering, and The Indure Private Limited. Gaur has a diploma in mechanical engineering as well as draughting certifications and is proficient in AutoCAD, AUCOPLAN, EMS, PDMS, Adobe Standard, and COMOS.
Punya_Resume
Punyasloka Rout is a mechanical design engineer with over 9 years of experience in designing exhaust and cooling systems for automobiles. He is currently a senior design engineer at Tata Technologies. Some of his responsibilities include developing exhaust system designs, creating 2D drawings and 3D models, coordinating with suppliers and clients, and leading teams of engineers. He has a BE in Mechanical Engineering from North Odisha University and has worked for several automotive companies in both India and Germany.
Pradeep Kumar C resume
Pradeep Kumar C is seeking a position in design and analysis with his 5 years of experience in the field. He has worked at QuEST Global as both a senior engineer and consultant. Previously, he was deputed from Sheeba Computers to Aeronautical Development Agency. He has extensive experience with CAD software including UG NX, Team Centre, Catia V5, Enovia, and AutoCAD. Some of his project experience includes cost optimization of wind turbine components, modeling and drafting of locomotive parts, optimization of design drawings for fuel system components, qualification testing of fuel system parts, and analysis of a transfer system to meet naval aircraft requirements. He has a B.E. in Mechanical Engineering with 73
Gradent solftware
The document describes software designed by Christopher Russell to help driverless cars select the optimal gear for upcoming hills by detecting the gradient of the terrain. The software analyzes map and sensor data to determine the hill's grade and automatically changes the car's gearing accordingly to improve fuel efficiency. It aims to fulfill customer needs for efficient driverless vehicles by linking its ability to adjust gearing based on terrain to savings on petrol.
Varun Kumar-Design Engineer_new
Varun Kumar is a mechanical engineer with experience in automotive engine design and product development seeking a design engineer position. He has a Master's degree in Mechanical Engineering from Clemson University and a Bachelor's from Birla Institute of Technology in India. His past work includes internships at ZF Transmissions identifying waste management solutions and problem solving issues. He previously worked at Mahindra and Mahindra on engine design projects, achieving cost reductions and optimizing components through value engineering. His technical skills include CAD, FEA, optimization and other engineering software. He has led several academic and industrial design projects focused on engine components.
Ben Herzog Resume
Benjamin Herzog is seeking a mechanical engineering position and has a BS in Mechanical Engineering from Michigan Technological University with a 3.87 GPA. He has internship experience at Manitowoc Cranes and MI-Tech Services performing engineering tasks such as design work, stress analysis, modeling, and technical drawings. At Michigan Tech, he was involved in projects including designing cars for supermileage competitions and an avalanche rescue robot. He has leadership experience through honor societies and as chief financial officer of the supermileage team.
Karthik Resume NPD
This document is a resume for M V Sai Karthik summarizing his professional experience and qualifications. He has over 3 years of experience in new product development, fabrication process, and production engineering. Some of his responsibilities include design reviews, coordinating production trials, maintaining quality documents, and ensuring project milestones are met. He has received several awards for his work and undergone relevant training programs. Currently he works as a Line Leader for new product development at Tata Toyo Radiator Ltd. in Pune, India.
Resume_Inthiyaz_02AUG2016
This document provides a summary of a product engineer with over 8 years of experience in automotive seating and interior components design. Key responsibilities include mechanical design, project management, tolerance analysis, and supporting products from concept to mass production. Strengths include CAD skills in CATIA V5 and experience in various technical areas such as sheet metal processing, tolerance stackup analysis, and regulatory compliance.
Nitin Mandloi
Mr. Nitin Mandloi has over 4 years of experience in vehicle integration and aggregates. He currently works as an Assistant Manager at International Tractors Ltd, where he is responsible for vehicle integration tasks such as layout preparation, design coordination, testing, and issue resolution. Previously he has worked on vehicle integration projects for companies like Hi-Tech Gears and Param Technologies. He has expertise in CAD tools like NX, Pro/E, CATIA, and SolidWorks as well as PDM/PLM systems. He holds a Bachelor's degree in Mechanical Engineering.
RichardStephensResume2
Richard S. Stephens is an engineering professional with over 25 years of experience in drafting, engineering design, checking, and analysis in the manufacturing industry. He currently works as a Checking Analyst at Caterpillar, Inc. where he checks and releases drawings and ensures compliance with engineering standards. He has expertise in various design, analysis, and CAD software and focuses on project management, product improvement, and cost reduction initiatives.
resume
Julianne Lumadilla is seeking a CAD operator position and has experience in that role at Modern Tech and Design Publication. She has a Bachelor's degree in Industrial Technology majoring in drafting. Her responsibilities as a CAD operator included generating technical drawings using AutoCAD, drafting and plotting conceptual plans, organizing and maintaining files for facilities and projects. Currently she works monitoring and validating inventories at Universal Paint H-chem Industries.
Resume_Yin_Xia
Yin Xia has over 10 years of experience in the automotive industry working for General Motors and Alpine Electronics of America. He is currently an Assistant Program Engineering Manager at GM, where he is responsible for major engineering projects and issue resolution. Previously, he held positions in manufacturing engineering, design, and project engineering. Xia is pursuing his MBA from Oakland University.
Resume Mm Brach Chronological 8.0
Margaret Brach has over 25 years of experience as a project manager and engineer in the automotive industry. She has managed numerous product development programs from design through launch across multiple companies, including Ford, Mazda, and CODA Automotive. Her skills include program management, engineering analysis, team leadership, quality control, and continuous process improvement. Brach holds a BS in Mechanical Engineering and is working towards an MS in International Administration.
Prabhakaran T
Prabhakaran T is a mechanical engineer with over 2 years of experience in automotive technical publication and design. He is currently working as an Animator & Technical Illustrator at Sree Krishna Power Engineering & Consultancy Pvt Ltd, where he creates repair manuals, maintenance manuals, and 3D repair animations for clients such as Mahindra & Mahindra. Prior to this, he worked as an Application Engineer at SIM Technologies Private Ltd, where he designed parts and assemblies using SOLIDWORKS and generated technical documentation. He holds a B.E. in Mechanical Engineering and is proficient in software such as CATIA Composer, SOLIDWORKS, Adobe Illustrator, and Arbor
Ermias e lemma resume 5 17-15
Ermias E. Lemma is seeking a mechanical engineering position. He has a Bachelor's degree in Mechanical Engineering from the University of Kentucky. During his studies, he completed four engineering internships in manufacturing, HVAC design, and research. His experience includes mechanical design, manufacturing engineering, HVAC design using various software programs. He also has leadership experience through involvement with student organizations like NSBE where he held various officer positions planning programs and events.
Planas Resume
Raymond Planas is a mechanical engineer with experience in HVAC design, solar PV design, and CAD drafting. He has a bachelor's degree in mechanical engineering from UNLV with a GPA of 3.64. He is proficient in various engineering software programs and holds a Nevada Certified Engineer Intern certification. Planas seeks to utilize his diverse skills and quality focus as a mechanical engineer.
1 17 W Flynn Resume
William Flynn has over 30 years of experience in engineering, quality management, and project management. He has held roles at several major companies including ATCO, Swagelok, General Motors, Delphi, and the United States Census Bureau. He has a background in quality control, process improvement, product launches, and overseeing teams.
Resume
Srinivas Kumar has over 11 years of experience in design engineering, product development, research and development. He has expertise in Pro-E, CREO, Ansys and AutoCAD. Some of his projects include cylinder block and cylinder head design, turbocharger component design, and lubricating oil pump design for diesel engines. He is looking for a senior level role in design engineering or product development, preferably in the automobile industry.
Resume_Linkedin
Shashank Johari is seeking a position as a construction manager. He has a Masters in Civil Engineering from Texas A&M University and a Bachelors in Civil Engineering from Maulana Azad National Institute of Technology in India. His resume outlines professional experience including internships with Walt Disney Imagineering, Ansal Properties and Infrastructure Ltd, Madhya Pradesh Road Development Corporation, and Larsen & Toubro Construction Division. He provides details on the size, budget, and schedule of each project. Shashank also lists technical skills with scheduling, estimating, and BIM software, as well as leadership positions held and academic projects completed.
resume
Matthew Jacob Sowa has over 5 years of experience as a product engineer designing and testing suspension and powertrain components for military vehicles. He has held product engineer roles at Loc Performance Products and TRW Automotive where he designed components, tested designs, and incorporated feedback to improve designs. Sowa has a B.S. in Mechanical Engineering from Oakland University and a B.A. in Physics and Mathematics from Albion College.
What's hot (20)
Viewers also liked
Jurnet Anthropometri Gelombang 2 2014
Dokumen ini berisi daftar 10 judul jurnal internet tentang ergonomi dan perancangan sistem kerja yang direkam di Laboratorium Ergonomi dan Perancangan Sistem Kerja. Jurnal-jurnal tersebut berasal dari tahun 2013 hingga 2014 dan terkait dengan modul antropometri reguler dan ekstensi serta program studi gelar II.
Fases del proceso tecnológico
El documento describe las 6 fases del proceso tecnológico: 1) búsqueda de información, 2) diseño, 3) planificación, 4) construcción, 5) verificación y evaluación, 6) divulgación. En la fase de búsqueda de información se busca información escrita, oral o a través del análisis de objetos tecnológicos. En la fase de diseño se realizan bocetos y planos del diseño elegido. La fase de planificación implica listar los materiales, herramientas
Readme
This document provides installation instructions for a DLL file downloaded from a website. It instructs the user to extract the DLL file to the program directory requesting it or the system directory, depending on the operating system. It also advises placing the DLL in the SysWOW64 directory for 64-bit Windows and overwriting any existing files after making a backup. Finally, it mentions using regsvr32 from the Run command to register the DLL if issues persist and provides a link for additional support.
Saber Guardian 2014 Communication Plan
Brief summary of planned communication efforts for exercise Saber Gaurdian 2014 from U.S. Army Europe Public Affairs. For more on the exercise, see http://www.eur.army.mil/saberguardian
Pp shooting schedule_template (1)
This shooting schedule template from Salford City College outlines the filming of various scenes on May 14th, 2014 for the creative media production project "Objects of Desire". The schedule lists the scene number, shot type, location, and completion status for 8 scenes shot for the film "Lloyds TSB" directed by Shannon for client Zip associates. Comments indicate that most shots went well and hit the director's brief, while one could have been more focused.
Company of heroes
The document describes a scene from the real-time strategy game Company of Heroes set during World War 2 in a forest near Carpiquet. It analyzes the sounds used at different times in the scene to set the mood, including recorded birds, a piano, guns firing, and planes landing that were digitally altered. As an RTS game, it would be expected to have environmental sounds and background music, which this scene does through recorded nature noises. Dialogue between German and British soldiers features different accents recorded by native speakers.
Viewers also liked (10)
Similar to Jesse Draper_Resume_191115
Resume functional automotive
Hector Rodriguez is an experienced automotive project manager with over 15 years of experience. He has managed projects with budgets over $10 million at General Motors. He has a master's degree in project management and is PMP certified. Hector has extensive experience leading cross-functional teams and implementing lean project management practices.
Ting Hung Yu Resume
Ting Hung Yu is seeking an engineering internship or full-time position where he can utilize his skills in mechanical engineering, CAD software, fabrication techniques, and project management. He has a B.S. in Mechanical Engineering from UC Irvine and experience leading multiple engineering projects involving vehicle and drone design and fabrication using CAD software, 3D printing, and CNC machining. His resume highlights experience managing a large Formula SAE racing team where he designed vehicle components, led manufacturing processes, and delivered business proposals to potential sponsors.
VirendraResume (1)
Virendrasingh Yadav is seeking a position in mechanical design or R&D. He has over 5 years of experience as a Design Engineer at Geometric Limited, where he has worked on projects involving CAD migration, product testing, and data organization. He is proficient in CAD software including Onshape, Autodesk Inventor, CATIA, and Pro-E. He holds a Bachelor's degree in Mechanical Engineering and is pursuing a Master's degree in Product Design and Development.
DamonLacovicresume122016noADDNew
This document provides a summary of an engineering professional's experience including 20 years in vehicle systems and electrical design engineering. Key skills include electrical design, test equipment development, interdisciplinary technical abilities, and business knowledge. Specialized expertise is demonstrated in various communication protocols, sensors, and design/documentation. Professional experience highlights leadership roles managing integration and testing of automotive systems at major automotive suppliers.
Resume_RyanMuller_2
Ryan Muller is seeking full-time employment as a Mechanical Engineering graduate. He will graduate from Clarkson University in May 2015 with a Bachelor of Science in Mechanical Engineering and a minor in Mathematics. He has work experience at Roush, General Motors, and Bob Johnson Chevrolet in roles involving design, manufacturing, and supervision. Muller also has experience leading student design teams and competitions. He is proficient in CAD software including Catia V5, NX 9.0, SolidWorks, Autodesk Inventor, and has taken classes in MATLAB and Simulink.
Ravi resume
Venkata Ravi Teja Kossireddy is seeking a position as an engineer where he can learn, innovate, and build his career. He has skills in CAD software, PLM tools, statistical tools, and office tools from his education and project experience. This includes projects in optimization, product development, quality management, and computer aided manufacturing at Wayne State University. He has a Master's in Industrial Engineering from Wayne State University and a Bachelor's in Mechanical Engineering from JNTU Hyderabad, India.
RajendraJResume
This document provides a summary of an individual's skills and experience in CAD/PLM solutions and consulting. Over 27 years of experience includes:
- Expertise in implementing Dassault Systemes' 3DExperience Platform, CATIA V6 and CATIA V5 with extensive technical skills.
- Experience managing end-to-end projects for clients in automotive and other industries, including requirement gathering, solution design, testing and support.
- Strong background in CAD tools like CATIA V5 and V4, and PLM tools including Enovia and SmarTeam.
- History of roles such as technical consultant, project manager, and technical sales consultant for companies including Dassault Syst
Marwan Shehata-CV.pdf
Mechanical Design Engineer with 5 years of experience in custom machinery, robotic grippers, and precision machines while maintaining DFx principles.
ESantavicca Resume March-2016
Edward Santavicca has over 14 years of experience in project management. He is a certified PMP with experience managing projects across multiple industries. Some of his areas of expertise include project planning, risk management, cost control, and establishing project management offices. He is currently a principal consultant providing project management services to clients.
Devaraj_SethuMadhavan_CV
Devaraj has over 14 years of experience in embedded systems for automotive applications. He has led teams of up to 40 members developing software for displays, transmissions, and other vehicle subsystems. Currently he aspires to take on a people and project management role to provide leadership on embedded software projects.
DansResume 12-02-16
Danny DeBurger has over 30 years of experience in engineering design, project management, and CAD modeling. He has extensive experience designing components for heavy trucks, diesel engines, jet engines, and aerospace projects. DeBurger is skilled in multiple CAD programs including Unigraphics NX, CATIA, and SolidWorks. He has worked as a project manager, design engineer, and CAD modeler for companies such as Rolls-Royce, Caterpillar, and International Trucks.
Suresh resume
Suresh R has over 3 years of experience in product development and design, specializing in front axle design. He currently works as a Catia Software Engineer at Renault Nissan Technology and Business Centre India, where he helps manage their global single access PDM database. Previously he worked at Ashok Leyland as a Design Associate, focusing on front axle design and field failure resolution. He has expertise in CAD tools like CATIA V5/V6 and UG-NX, as well as PLM tools including ENOVIA, Teamcenter, and LEAP. Suresh holds a Bachelor's degree in Mechanical Engineering from DR. M.G.R University and is proficient in English,
CV_NEW
This document contains a summary of Abu-Bakr Saleh's qualifications and experience as a Mechanical Engineer. He has over 5 years of experience in sales, service engineering, quality control, and mechanical design. His areas of expertise include manufacturing processes, fabrication, CNC machining, and assembly line implementation. He is currently working as a Sales & Service Engineer at Atlas Honda Limited, where he helps improve product quality and implements new bike and car models.
CustomerCopy (1)
This profile summary highlights the individual's experience in program management, new product development, quality management, and vendor management. Over 9 years of experience is outlined, including current roles as Program Manager at Ashok Leyland International Operations in the UAE and previous roles in program management, new product development, and design engineering at Mahindra & Mahindra and TVS Motor Company in India. Relevant technical skills, academic qualifications, and personal details are also provided.
Battery Experience
The candidate has over 15 years of experience in battery design, development, and validation for various automotive OEMs. As a product engineer, the candidate led the design and testing of batteries according to industry standards and worked closely with battery suppliers. The candidate also has experience in program management and led engineering teams to ensure vehicle integration and regulatory compliance.
Alex_Ranum_resume_SD
Alex Ranum graduated from the University of Colorado Boulder in 2015 with a B.S. in Mechanical Engineering. He has experience as an engineering intern at United Technologies Aerospace Systems where he supported engine nacelle design and developed engineering tools. Ranum also has experience as a teaching assistant for SolidWorks and has worked on senior design projects for Ford including designing an oil conditioning system. His other experiences include instructional sailing, volunteer English teaching in Spain, and competitions in cycling, triathlon, and sailing.
Jacob Daniel Resume
The document is a resume for Jacob Daniel, a mechanical engineer with 5 years of experience in design, project management, and product development in various industries including oil and gas. His experience includes designing tools for pressure controlled environments, managing lean projects, and working with vendors. He has a Master's degree in engineering management and a Bachelor's in mechanical engineering. His current role is as a mechanical engineer at Halliburton where he designs downhole completion tools and provides technical support to other teams.
Brendan_Salmond_Resume_2015_V4
Brendan is a mechanical engineer with experience in the automotive industry, having worked at Bosch for over 3 years developing software simulation tools. He has skills in MATLAB, Simulink, vehicle dynamics, mechanical design, software, electronics systems and programming languages like C and Visual Basic. Brendan is looking to specialize in one field and make a meaningful contribution.
Wpf resume-formal-eng-current-design-5
Warren P. Faeth is a results-driven mechanical engineering and project management professional with over 30 years of experience. He has held several senior engineering roles developing products for industries such as automotive, trucking, and petroleum. He has experience leading R&D projects, negotiating contracts, developing new products, and managing teams. He has a Bachelor's degree in Mechanical Engineering Technology and holds 8 US patents.
Resume_Mechanical Design Engineer_6.10 years experience
CAD designer offering 6.10 years of industrial experience, of which, 4.5 years in Mechanical Design and Manufacturing, 9 months in Production, and 1.8 years in Metal Fabrication.
Similar to Jesse Draper_Resume_191115 (20)
Resume_Mechanical Design Engineer_6.10 years experience
Resume_Mechanical Design Engineer_6.10 years experience
Jesse Draper_Resume_191115
- 1. Jesse L. Draper 15917 Falling Run Rd. • Sharpsburg, MD 21782 • 240-625-5921 • jessedraper8@gmail.com Education Universityof Maryland; College Park, MD B.S. Mechanical Engineering, December 2014 GPA: 3.2 Technical Experience Ford Motor Company Product Development Engineer, Summer 2015 - Present • Plan and perform testingon all aspectsof hybrid powertrains, evaluate test results • Utilize software tools to obtain data, modify calibrations, and verify software functionality • Manage prototype development through several departments Volvo Powertrain/Mack Truck Technical Development Lab Internship, Summer 2014 • Created a 3D CAD model of Volvo’s engine durability test cells(plus manyother CAD projects) • Designed an emissions (NOx) sensor test rig • Optimized the design of a custom fuel flow meter and created CAD model Volvo Powertrain/Mack Truck Project Management Engineering Internship, Summer 2013 • Designed and developed an oil pump testingrig for use at Volvo Powertrain North America • Assisted in the implementation of a cost improvement workshop and evaluated ideasgenerated Volvo Powertrain/Mack Truck Test Engineering Internship, Summer 2012 • Designed, organized, and executed tests on various truck systems(performance, emissions,etc.) • Evaluated test results and wrote engineeringreports • Utilized ATI Vision to flash truck ECUs, performed software release verification testing University of Maryland Entrepreneurship in Engineering Product Creation Project, Fall 2014 • Invented a new product for the consumer market • Followed product development process to create a functional prototype • Created a businessplan, performed a market analysis, pitched product to potential investors Terps Racing Formula SAE, Fall 2011 – Spring 2015 • Test driver – evaluate vehicle performance and translate issuesinto engineeringsolutions • Designed parts for manufacturingand gained machine working experience • Worked on high performance vehicle design projectswith hard deadlineswithin a sub-team Entrepreneurial Venture Draper’s 3D Printing Design Service • Invested in a 3D printer in order to manufacture automotive parts • Designed, 3D printed, and sold interior components for various vehicles Computer Skills Programs: ATI Vision, CANalyzer, MATLAB, Inventor, Solidworks, Creo, ANSYS and AutoCAD Languages: Java, C/C++ References David Smith – EngineeringLab Development Manager at Volvo Powertrain (301) 790-5647, david.r.smith@volvo.com