Jamur
•Download as RTF, PDF•
0 likes•1,413 views
This document outlines a microbiology lab practical on examining fungi. The objectives are to observe fungi microscopically, see fungal growth on Sabouraud agar, and prepare and stain fungal specimens. Students are tasked with preparing slides from provided fungal specimens, staining with Gram and LPCB stains, and drawing samples of Candida and fungal growth on agar. The lab aims to identify fungi and differentiate them from bacteria microscopically.
Report
Share
Report
Share
Recommended
Parrafo #2 rise aseptic technique and gram stain
This lab document outlines techniques used to analyze two unknown bacteria samples, including streak plating to isolate individual colonies, preparing smears to examine cell morphology, Gram staining to identify if cells are Gram-positive or Gram-negative based on whether they retain a purple or pink color, and a spore staining method to check for endospores. The student expresses enjoyment of gaining experience with these new laboratory techniques.
Practical lab 2-dr saleh
This document provides instructions for performing a Gram stain procedure. The Gram stain allows bacteria to be classified as either Gram-positive or Gram-negative based on differences in their cell wall structure and how they interact with stain reagents. The procedure involves staining a bacterial smear with crystal violet, applying Gram's iodine as a mordant, decolorizing with ethanol or acetone, and counterstaining with safranin. Gram-positive bacteria appear purple or violet while Gram-negative bacteria appear pink or red. The document provides step-by-step instructions for performing the Gram stain and interpreting results under the microscope.
Microbilog ypractical
This document provides lab instructions and procedures for microbiology techniques including specimen collection and processing, media preparation, staining methods, biochemical identification of common organisms, antibiotic sensitivity testing, mycology examinations, and serology tests. Proper handling of equipment like microscopes, autoclaves, centrifuges, and incubators is covered as well as maintenance and cleaning. Collection methods are described for specimens such as blood, urine, stool, sputum, and swabs for microbiology analysis.
Dadan zaenudin (4083007)
UKM Jamur Tiram berlokasi di Kp. Cukang Kawung, Cimahi, memproduksi dan menjual jamur tiram serta memberikan pelatihan budidaya. Awalnya hanya mengandalkan promosi sederhana, namun setelah dibantu pemasaran lewat sosial media, penjualan dan konsumennya meningkat. Kendala saat ini adalah fasilitas produksi yang kurang memadai.
Mycobacteriology Update 2023
This document provides an overview of mycobacteriology. It discusses acid-fast bacilli (AFB) staining and taxonomy. Laboratory safety level 3 is required for working with mycobacteria. Diagnostic testing includes the tuberculin skin test, interferon-gamma release assays, and molecular detection of TB from respiratory specimens. Culture media like Middlebrook and Lowenstein-Jensen are used to grow mycobacteria. Identification has transitioned to methods like MALDI-TOF mass spectrometry from older biochemical techniques. Common pathogens include Mycobacterium tuberculosis and non-tuberculous mycobacteria.
Mycobacteriology 2016
This document provides an overview of mycobacteriology and techniques used for tuberculosis screening and diagnosis. It discusses the PPD skin test and IGRAs for TB screening, as well as acid-fast staining and culture techniques used to identify mycobacteria in clinical specimens. Key points covered include the characteristics of the mycobacteria genus, the Runyon classification system for grouping nontuberculous mycobacteria, and the multi-step process for decontaminating, staining, and culturing specimens to diagnose mycobacterial infections.
Online conference undip indonesia
Eight fungal isolates were obtained from sponges in mangrove ecosystems. SPMKF1 and SPMKF6 showed amylase activity, SPMKF4 and SPMKF5 showed anti-MRSA activity, and SPMKF8 demonstrated antimicrobial activity against several pathogens and produced amylase. SPMKF1 was identified as Cladosporium tenuissimum, SPMKF4 as Eutypella sp., SPMKF5 as Lasiodiplodia theobromae, SPMKF6 as Fusarium keratoplasticum, and SPMKF8 as Fusarium solani. The α-amylase gene was detected in SPMKF1
Biol3400 labmanual
This document is a laboratory manual for a microbiology course at the University of Lethbridge. It provides details on the course schedule, grading breakdown, safety guidelines, and 10 laboratory exercises covering topics like microscopy, bacterial morphology, nitrogen fixation, the Ames test, biochemical tests, yeast fermentation and virology. Appendices provide additional instructions on microscope use, aseptic technique, media preparation and laboratory notebook expectations. The manual aims to guide students through hands-on learning of key microbiology principles and techniques over the course of the semester.
Recommended
Parrafo #2 rise aseptic technique and gram stain
This lab document outlines techniques used to analyze two unknown bacteria samples, including streak plating to isolate individual colonies, preparing smears to examine cell morphology, Gram staining to identify if cells are Gram-positive or Gram-negative based on whether they retain a purple or pink color, and a spore staining method to check for endospores. The student expresses enjoyment of gaining experience with these new laboratory techniques.
Practical lab 2-dr saleh
This document provides instructions for performing a Gram stain procedure. The Gram stain allows bacteria to be classified as either Gram-positive or Gram-negative based on differences in their cell wall structure and how they interact with stain reagents. The procedure involves staining a bacterial smear with crystal violet, applying Gram's iodine as a mordant, decolorizing with ethanol or acetone, and counterstaining with safranin. Gram-positive bacteria appear purple or violet while Gram-negative bacteria appear pink or red. The document provides step-by-step instructions for performing the Gram stain and interpreting results under the microscope.
Microbilog ypractical
This document provides lab instructions and procedures for microbiology techniques including specimen collection and processing, media preparation, staining methods, biochemical identification of common organisms, antibiotic sensitivity testing, mycology examinations, and serology tests. Proper handling of equipment like microscopes, autoclaves, centrifuges, and incubators is covered as well as maintenance and cleaning. Collection methods are described for specimens such as blood, urine, stool, sputum, and swabs for microbiology analysis.
Dadan zaenudin (4083007)
UKM Jamur Tiram berlokasi di Kp. Cukang Kawung, Cimahi, memproduksi dan menjual jamur tiram serta memberikan pelatihan budidaya. Awalnya hanya mengandalkan promosi sederhana, namun setelah dibantu pemasaran lewat sosial media, penjualan dan konsumennya meningkat. Kendala saat ini adalah fasilitas produksi yang kurang memadai.
Mycobacteriology Update 2023
This document provides an overview of mycobacteriology. It discusses acid-fast bacilli (AFB) staining and taxonomy. Laboratory safety level 3 is required for working with mycobacteria. Diagnostic testing includes the tuberculin skin test, interferon-gamma release assays, and molecular detection of TB from respiratory specimens. Culture media like Middlebrook and Lowenstein-Jensen are used to grow mycobacteria. Identification has transitioned to methods like MALDI-TOF mass spectrometry from older biochemical techniques. Common pathogens include Mycobacterium tuberculosis and non-tuberculous mycobacteria.
Mycobacteriology 2016
This document provides an overview of mycobacteriology and techniques used for tuberculosis screening and diagnosis. It discusses the PPD skin test and IGRAs for TB screening, as well as acid-fast staining and culture techniques used to identify mycobacteria in clinical specimens. Key points covered include the characteristics of the mycobacteria genus, the Runyon classification system for grouping nontuberculous mycobacteria, and the multi-step process for decontaminating, staining, and culturing specimens to diagnose mycobacterial infections.
Online conference undip indonesia
Eight fungal isolates were obtained from sponges in mangrove ecosystems. SPMKF1 and SPMKF6 showed amylase activity, SPMKF4 and SPMKF5 showed anti-MRSA activity, and SPMKF8 demonstrated antimicrobial activity against several pathogens and produced amylase. SPMKF1 was identified as Cladosporium tenuissimum, SPMKF4 as Eutypella sp., SPMKF5 as Lasiodiplodia theobromae, SPMKF6 as Fusarium keratoplasticum, and SPMKF8 as Fusarium solani. The α-amylase gene was detected in SPMKF1
Biol3400 labmanual
This document is a laboratory manual for a microbiology course at the University of Lethbridge. It provides details on the course schedule, grading breakdown, safety guidelines, and 10 laboratory exercises covering topics like microscopy, bacterial morphology, nitrogen fixation, the Ames test, biochemical tests, yeast fermentation and virology. Appendices provide additional instructions on microscope use, aseptic technique, media preparation and laboratory notebook expectations. The manual aims to guide students through hands-on learning of key microbiology principles and techniques over the course of the semester.
Pglo Lab Report
The document describes a lab experiment that tests how the addition of a pGLO plasmid affects the growth and characteristics of E. coli bacteria. The experiment involves transforming E. coli bacteria with the pGLO plasmid by adding it to a solution containing the bacteria. One solution receives the pGLO plasmid (+pGLO) while the other does not (-pGLO). The bacteria are then observed under UV light and incubated under various conditions to analyze effects on growth and gene expression.
Mycobacteriology 2022
This document provides information about mycobacteria, including their classification, identification, laboratory safety protocols, and diagnostic testing. It discusses the taxonomy and characteristics of mycobacteria species, with a focus on Mycobacterium tuberculosis. Methods covered include acid-fast staining, automated detection systems, PCR, and interferon gamma release assays for diagnosis of tuberculosis.
Mycobacteriology 2021
This document provides an overview of mycobacteriology and the identification and diagnosis of mycobacteria species. It discusses the characteristics of acid-fast bacilli, current identification methods including genetic sequencing and mass spectrometry, mycobacteria taxonomy and disease-causing species. It also summarizes specimen collection and processing, culture methods, acid-fast staining, and molecular detection of tuberculosis.
Lab Report: Isolation of Pure Culture, Gram-staining, and Microscopic Observa...
A Lab Report under the subject of Microbiology. Done as a lab session in Josai University, Japan during a twinning program on 2014.
Created by: Annisa Hayatunnufus
Bachelor of Pharmacy
Management & Science University
Website mycobacteriology 2017 update
This document summarizes information about mycobacteriology and tuberculosis. It discusses the PPD skin test and IGRAs for detecting TB infection. It describes acid-fast staining and characteristics of the mycobacteria genus. The document outlines the specimen processing, culture, and identification of mycobacteria, including M. tuberculosis. It also summarizes tuberculosis disease characteristics and methods for direct detection of M. tuberculosis from respiratory specimens.
Characterization of Bacteria Isolated from Tropical Soils of Puerto Rico
This document summarizes a student research project that aimed to characterize bacteria isolated from soils in Puerto Rico. Soil samples were collected and bacteria were isolated on agar plates before being purified through restreaking. Gram staining identified the bacteria as either gram-positive or gram-negative. Genomic DNA was extracted and amplified via PCR. However, when tested on indicator plates, the isolated bacteria did not show any antibiotic production against E. coli or M. luteus as hypothesized. While full characterization was not completed due to time constraints, the student plans future work identifying the bacteria through DNA sequencing.
Characterization of antifungal metabolite from serendipitiously isolated bact...
The document describes the isolation and characterization of an antifungal metabolite from a bacterium. A bacterium was isolated serendipitously from a contaminated agar plate that showed antifungal activity. It was identified as a novel strain of Pseudomonas tolaasii based on 16S rRNA gene sequencing. The bacterium showed activity against various fungi in agar assays. The active metabolite was extracted using ammonium sulfate precipitation and dialysis, and showed activity based on MODA assays. FTIR analysis identified functional groups matching lipodepsipeptides. Further studies are needed to purify and characterize the antifungal molecule.
7.ann&2.ramon bacteriareportofficial
This research aimed to characterize bacteria isolated from soils in Puerto Rico. Two soil samples were collected and various tests were performed on the isolated bacteria, including Gram staining, DNA purification and amplification, and testing for antibiotic production. One isolated bacterium (S15UPRC-RISEAMGP30SP01A1) was identified as a gram-positive cocci resembling Staphylococcus and did not produce antibiotics. The other (S15UPRC-RISERBCR30P01A2) was a gram-positive Bacillus but did not produce antibiotics. Neither bacterium could be fully characterized due to negative PCR results, failing to confirm the hypothesis of positive antibiotic production. Further tests are needed to fully characterize the
Food Standards Australia New Zealand
The student was given an unknown mixed culture and used quadrant streaking to isolate a pure colony. A Gram stain showed the isolated bacteria was Gram positive. Motility tests found it was non-motile. A series of metabolic tests for properties like citrate utilization, carbohydrate fermentation, and catalase presence were done. By comparing the results to database entries, the unknown bacteria was identified as Staphylococcus.
Anti-Microbial Activity of probiotic Lactobacilli and Optimization of Bacteri...
The present study is about the anti-microbial activity of the bacteriocin producing lactobacilli and optimization of bacteriocin production. Bacteriocin was extracted by solvent extraction with chloroform and the antimicrobial activity was tested against 5 different pathogens by agar spotting method. Optimization of bacteriocin production was done for 4 different parameters such as pH, Temperature, Carbon source and Nitrogen source and the anti-microbial activity was tested against the following 5 different pathogens and the results were observed and diameter of the zone of inhibition was measured and tabulated. From the results of the study it was found that bacteriocin produced from lactobacilli has good antimicrobial activity.The present study is about the anti-microbial activity of the bacteriocin producing lactobacilli and optimization of bacteriocin production. Bacteriocin was extracted by solvent extraction with chloroform and the antimicrobial activity was tested against 5 different pathogens by agar spotting method. Optimization of bacteriocin production was done for 4 different parameters such as pH, Temperature, Carbon source and Nitrogen source and the anti-microbial activity was tested against the following 5 different pathogens and the results were observed and diameter of the zone of inhibition was measured and tabulated. From the results of the study it was found that bacteriocin produced from lactobacilli has good antimicrobial activity.
Mycobacteriology
This document provides an overview of mycobacteriology, including Mycobacterium tuberculosis and other mycobacteria. It discusses the PPD skin test and newer interferon gamma release assays for detecting TB infection. It describes the Runyon classification system for grouping mycobacteria based on pigment production. Key aspects of processing specimens, staining, culturing, and identifying mycobacteria are summarized, along with the most common mycobacteria that can cause disease. The document emphasizes the importance of safety protocols when working with mycobacteria in the laboratory.
Application of microbiology in pharmaceuticals
Thank you for the presentation. Microbiology plays an important role in ensuring pharmaceutical quality and safety.
MicroPRO, A Rapid Microbiology Method Based on Flow Cytometry
This document provides information on disruptive technologies and rapid microbiology products represented by the company. It summarizes their product range including instruments for biological sample preparation, dissolution/formulation, physico-chemistry analysis, and rapid microbiology detection. It also discusses their markets in pharmaceutical, personal care, fermentation, and more. The MicroPRO instrument allows detection of bacteria, yeast and mold from various samples within 24 hours.
Gram Staining Paper
This lab report summarizes a gram staining experiment performed to classify bacteria samples as either gram-positive or gram-negative. Five bacterial samples were obtained from an incubated petri dish and smeared onto slides. The slides were gram stained using the crystal violet, iodine, decolorizer, and safranin dye method. Observations of each bacteria's color, shape, and cellular arrangement were recorded to determine if they were gram-positive or gram-negative. The purpose was to narrow down bacteria identification and aid in diagnosis using this staining classification technique.
Mycobacteriology 2020
1) Mycobacteria are acid-fast bacilli with a thick cell wall containing mycolic acids, contributing to their hardiness. Identification methods have advanced from biochemical reactions to genetic analysis using probes, mass spectrometry, and sequencing.
2) There are over 170 mycobacterial species split into two groups - the TB complex and non-tuberculous mycobacteria. Identification and classification systems have evolved from the Runyon system based on pigmentation and growth rate.
3) Proper handling and processing of specimens is important for recovery of mycobacteria, including decontamination to remove competing bacteria and centrifugation to pellet the acid-fast bacilli for staining and culture.
Abdominal Tuberculosis – How Far are Our Diagnostics Illuminating?
1) Abdominal tuberculosis can involve many abdominal organs and sites, with the ileocaecal region being most common. Diagnosis is dependent on correct identification and drug sensitivity testing of Mycobacterium tuberculosis.
2) Various diagnostic methods are available including AFB smear, culture, molecular tests like PCR and NAAT, and antigen/antibody tests. Culture remains the gold standard but newer automated non-radiometric systems like MGIT960 can provide faster results.
3) Molecular tests like nested PCR and NAAT provide very rapid results within hours but are used as supplements to culture. IFN-γ release assays and ADA levels in ascitic fluid also provide supportive diagnostic information. Proper diagnostic method selection
Dr. A. Sumathi - Question Bank_Third Semester - Pharmaceutical Microbiology
Dr. A. Sumathi - Question Bank - Third Semester B.Pharm - Pharmaceutical Microbiology - Microbes, Bacteria, Virus, Fungi & Biochemical Tests
Bacterial identification
The document discusses methods for identifying bacteria, including phenotypic, immunological, and genetic techniques. Phenotypic methods examine bacterial morphology, staining characteristics, and biochemical reactions. Tests like Gram staining, colony morphology, and catalase can provide initial identification. Further tests of carbohydrate use, enzyme production, and sensitivity to inhibitors allow identification to the species level. Immunological methods detect bacterial antigens, while genetic techniques like PCR and nucleic acid analysis provide accurate identification by examining microbial DNA. Both traditional and molecular methods are used to fully characterize unknown bacteria.
Environmental Microbiology - Screening of Producer strain
This document provides information about screening techniques used to isolate industrially important microorganisms. It discusses primary screening techniques like the crowded plate technique, indicator dye technique, and enrichment culture technique. These techniques are used to initially isolate microbes from environmental sources like soil that exhibit desired properties. The document then gives examples of using these techniques to isolate antibiotic-producing microbes and describes factors considered for selecting an optimal producer strain for industrial applications.
Bacteria Identification Tests.pdf
The document discusses various methods used to identify bacteria after isolation, including staining, motility testing, biochemical tests, serology, phage typing, identification discs, and automated systems. Staining is the first step and differentiates bacteria as gram positive or negative. Biochemical tests like catalase, oxidase, indole, citrate, and urease provide further information on bacterial metabolism. Serology detects antigens to identify bacteria like Salmonella and Vibrio cholerae. Phage typing uses bacteriophages to distinguish bacterial strains. Identification discs and automated systems can also identify bacteria and test antibiotic susceptibility.
More Related Content
Similar to Jamur
Pglo Lab Report
The document describes a lab experiment that tests how the addition of a pGLO plasmid affects the growth and characteristics of E. coli bacteria. The experiment involves transforming E. coli bacteria with the pGLO plasmid by adding it to a solution containing the bacteria. One solution receives the pGLO plasmid (+pGLO) while the other does not (-pGLO). The bacteria are then observed under UV light and incubated under various conditions to analyze effects on growth and gene expression.
Mycobacteriology 2022
This document provides information about mycobacteria, including their classification, identification, laboratory safety protocols, and diagnostic testing. It discusses the taxonomy and characteristics of mycobacteria species, with a focus on Mycobacterium tuberculosis. Methods covered include acid-fast staining, automated detection systems, PCR, and interferon gamma release assays for diagnosis of tuberculosis.
Mycobacteriology 2021
This document provides an overview of mycobacteriology and the identification and diagnosis of mycobacteria species. It discusses the characteristics of acid-fast bacilli, current identification methods including genetic sequencing and mass spectrometry, mycobacteria taxonomy and disease-causing species. It also summarizes specimen collection and processing, culture methods, acid-fast staining, and molecular detection of tuberculosis.
Lab Report: Isolation of Pure Culture, Gram-staining, and Microscopic Observa...
A Lab Report under the subject of Microbiology. Done as a lab session in Josai University, Japan during a twinning program on 2014.
Created by: Annisa Hayatunnufus
Bachelor of Pharmacy
Management & Science University
Website mycobacteriology 2017 update
This document summarizes information about mycobacteriology and tuberculosis. It discusses the PPD skin test and IGRAs for detecting TB infection. It describes acid-fast staining and characteristics of the mycobacteria genus. The document outlines the specimen processing, culture, and identification of mycobacteria, including M. tuberculosis. It also summarizes tuberculosis disease characteristics and methods for direct detection of M. tuberculosis from respiratory specimens.
Characterization of Bacteria Isolated from Tropical Soils of Puerto Rico
This document summarizes a student research project that aimed to characterize bacteria isolated from soils in Puerto Rico. Soil samples were collected and bacteria were isolated on agar plates before being purified through restreaking. Gram staining identified the bacteria as either gram-positive or gram-negative. Genomic DNA was extracted and amplified via PCR. However, when tested on indicator plates, the isolated bacteria did not show any antibiotic production against E. coli or M. luteus as hypothesized. While full characterization was not completed due to time constraints, the student plans future work identifying the bacteria through DNA sequencing.
Characterization of antifungal metabolite from serendipitiously isolated bact...
The document describes the isolation and characterization of an antifungal metabolite from a bacterium. A bacterium was isolated serendipitously from a contaminated agar plate that showed antifungal activity. It was identified as a novel strain of Pseudomonas tolaasii based on 16S rRNA gene sequencing. The bacterium showed activity against various fungi in agar assays. The active metabolite was extracted using ammonium sulfate precipitation and dialysis, and showed activity based on MODA assays. FTIR analysis identified functional groups matching lipodepsipeptides. Further studies are needed to purify and characterize the antifungal molecule.
7.ann&2.ramon bacteriareportofficial
This research aimed to characterize bacteria isolated from soils in Puerto Rico. Two soil samples were collected and various tests were performed on the isolated bacteria, including Gram staining, DNA purification and amplification, and testing for antibiotic production. One isolated bacterium (S15UPRC-RISEAMGP30SP01A1) was identified as a gram-positive cocci resembling Staphylococcus and did not produce antibiotics. The other (S15UPRC-RISERBCR30P01A2) was a gram-positive Bacillus but did not produce antibiotics. Neither bacterium could be fully characterized due to negative PCR results, failing to confirm the hypothesis of positive antibiotic production. Further tests are needed to fully characterize the
Food Standards Australia New Zealand
The student was given an unknown mixed culture and used quadrant streaking to isolate a pure colony. A Gram stain showed the isolated bacteria was Gram positive. Motility tests found it was non-motile. A series of metabolic tests for properties like citrate utilization, carbohydrate fermentation, and catalase presence were done. By comparing the results to database entries, the unknown bacteria was identified as Staphylococcus.
Anti-Microbial Activity of probiotic Lactobacilli and Optimization of Bacteri...
The present study is about the anti-microbial activity of the bacteriocin producing lactobacilli and optimization of bacteriocin production. Bacteriocin was extracted by solvent extraction with chloroform and the antimicrobial activity was tested against 5 different pathogens by agar spotting method. Optimization of bacteriocin production was done for 4 different parameters such as pH, Temperature, Carbon source and Nitrogen source and the anti-microbial activity was tested against the following 5 different pathogens and the results were observed and diameter of the zone of inhibition was measured and tabulated. From the results of the study it was found that bacteriocin produced from lactobacilli has good antimicrobial activity.The present study is about the anti-microbial activity of the bacteriocin producing lactobacilli and optimization of bacteriocin production. Bacteriocin was extracted by solvent extraction with chloroform and the antimicrobial activity was tested against 5 different pathogens by agar spotting method. Optimization of bacteriocin production was done for 4 different parameters such as pH, Temperature, Carbon source and Nitrogen source and the anti-microbial activity was tested against the following 5 different pathogens and the results were observed and diameter of the zone of inhibition was measured and tabulated. From the results of the study it was found that bacteriocin produced from lactobacilli has good antimicrobial activity.
Mycobacteriology
This document provides an overview of mycobacteriology, including Mycobacterium tuberculosis and other mycobacteria. It discusses the PPD skin test and newer interferon gamma release assays for detecting TB infection. It describes the Runyon classification system for grouping mycobacteria based on pigment production. Key aspects of processing specimens, staining, culturing, and identifying mycobacteria are summarized, along with the most common mycobacteria that can cause disease. The document emphasizes the importance of safety protocols when working with mycobacteria in the laboratory.
Application of microbiology in pharmaceuticals
Thank you for the presentation. Microbiology plays an important role in ensuring pharmaceutical quality and safety.
MicroPRO, A Rapid Microbiology Method Based on Flow Cytometry
This document provides information on disruptive technologies and rapid microbiology products represented by the company. It summarizes their product range including instruments for biological sample preparation, dissolution/formulation, physico-chemistry analysis, and rapid microbiology detection. It also discusses their markets in pharmaceutical, personal care, fermentation, and more. The MicroPRO instrument allows detection of bacteria, yeast and mold from various samples within 24 hours.
Gram Staining Paper
This lab report summarizes a gram staining experiment performed to classify bacteria samples as either gram-positive or gram-negative. Five bacterial samples were obtained from an incubated petri dish and smeared onto slides. The slides were gram stained using the crystal violet, iodine, decolorizer, and safranin dye method. Observations of each bacteria's color, shape, and cellular arrangement were recorded to determine if they were gram-positive or gram-negative. The purpose was to narrow down bacteria identification and aid in diagnosis using this staining classification technique.
Mycobacteriology 2020
1) Mycobacteria are acid-fast bacilli with a thick cell wall containing mycolic acids, contributing to their hardiness. Identification methods have advanced from biochemical reactions to genetic analysis using probes, mass spectrometry, and sequencing.
2) There are over 170 mycobacterial species split into two groups - the TB complex and non-tuberculous mycobacteria. Identification and classification systems have evolved from the Runyon system based on pigmentation and growth rate.
3) Proper handling and processing of specimens is important for recovery of mycobacteria, including decontamination to remove competing bacteria and centrifugation to pellet the acid-fast bacilli for staining and culture.
Abdominal Tuberculosis – How Far are Our Diagnostics Illuminating?
1) Abdominal tuberculosis can involve many abdominal organs and sites, with the ileocaecal region being most common. Diagnosis is dependent on correct identification and drug sensitivity testing of Mycobacterium tuberculosis.
2) Various diagnostic methods are available including AFB smear, culture, molecular tests like PCR and NAAT, and antigen/antibody tests. Culture remains the gold standard but newer automated non-radiometric systems like MGIT960 can provide faster results.
3) Molecular tests like nested PCR and NAAT provide very rapid results within hours but are used as supplements to culture. IFN-γ release assays and ADA levels in ascitic fluid also provide supportive diagnostic information. Proper diagnostic method selection
Dr. A. Sumathi - Question Bank_Third Semester - Pharmaceutical Microbiology
Dr. A. Sumathi - Question Bank - Third Semester B.Pharm - Pharmaceutical Microbiology - Microbes, Bacteria, Virus, Fungi & Biochemical Tests
Bacterial identification
The document discusses methods for identifying bacteria, including phenotypic, immunological, and genetic techniques. Phenotypic methods examine bacterial morphology, staining characteristics, and biochemical reactions. Tests like Gram staining, colony morphology, and catalase can provide initial identification. Further tests of carbohydrate use, enzyme production, and sensitivity to inhibitors allow identification to the species level. Immunological methods detect bacterial antigens, while genetic techniques like PCR and nucleic acid analysis provide accurate identification by examining microbial DNA. Both traditional and molecular methods are used to fully characterize unknown bacteria.
Environmental Microbiology - Screening of Producer strain
This document provides information about screening techniques used to isolate industrially important microorganisms. It discusses primary screening techniques like the crowded plate technique, indicator dye technique, and enrichment culture technique. These techniques are used to initially isolate microbes from environmental sources like soil that exhibit desired properties. The document then gives examples of using these techniques to isolate antibiotic-producing microbes and describes factors considered for selecting an optimal producer strain for industrial applications.
Bacteria Identification Tests.pdf
The document discusses various methods used to identify bacteria after isolation, including staining, motility testing, biochemical tests, serology, phage typing, identification discs, and automated systems. Staining is the first step and differentiates bacteria as gram positive or negative. Biochemical tests like catalase, oxidase, indole, citrate, and urease provide further information on bacterial metabolism. Serology detects antigens to identify bacteria like Salmonella and Vibrio cholerae. Phage typing uses bacteriophages to distinguish bacterial strains. Identification discs and automated systems can also identify bacteria and test antibiotic susceptibility.
Similar to Jamur (20)
Lab Report: Isolation of Pure Culture, Gram-staining, and Microscopic Observa...
Lab Report: Isolation of Pure Culture, Gram-staining, and Microscopic Observa...
Characterization of Bacteria Isolated from Tropical Soils of Puerto Rico
Characterization of Bacteria Isolated from Tropical Soils of Puerto Rico
Characterization of antifungal metabolite from serendipitiously isolated bact...
Characterization of antifungal metabolite from serendipitiously isolated bact...
Anti-Microbial Activity of probiotic Lactobacilli and Optimization of Bacteri...
Anti-Microbial Activity of probiotic Lactobacilli and Optimization of Bacteri...
MicroPRO, A Rapid Microbiology Method Based on Flow Cytometry
MicroPRO, A Rapid Microbiology Method Based on Flow Cytometry
Abdominal Tuberculosis – How Far are Our Diagnostics Illuminating?
Abdominal Tuberculosis – How Far are Our Diagnostics Illuminating?
Dr. A. Sumathi - Question Bank_Third Semester - Pharmaceutical Microbiology
Dr. A. Sumathi - Question Bank_Third Semester - Pharmaceutical Microbiology
Environmental Microbiology - Screening of Producer strain
Environmental Microbiology - Screening of Producer strain
Jamur
- 1. LEMBAR KERJA PRAKTIKUM PEMERIKSAAN JAMUR TUJUAN Mengamati gambaran mikroskopik jamur dan membedakannya dari bakteri Mengamati gambaran biakan jamur pada agar Sabouraud Memahami dan mengerjakan pembuatan preparat dan pengecatan jamur dengan cat Gram dan LPCB, dari spesimen jamur yang telah disediakan. DASAR TEORI Tulislah dasar teori berdasarkan pustaka sebanyak 150-200 kata. ALAT Mikroskop Gelas obyek Deck glass Ose bulat Kertas label BAHAN Spesimen untuk pemeriksaan jamur Contoh preparat mikroskopik Candida sp Contoh biakan jamur pada agar Sabouraud : C. albicans, Rhizopus sp, Trichophyton sp, Trichophyton rubrum, Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger Cat Gram A, B, C dan D Cat LPCB KOH 10-20 % SKEMA KERJA Pemeriksaan Jamur 0100090000038d00000002001c00000000000400000003010800050000000b02000000 00050000000c02740c3208040000002e0118001c000000fb021000070000000000bc02 000000000102022253797374656d007628fcb608dc9d2800cc031f7640912276d84db5 08e89d2800040000002d010000040000002d01000004000000020101001c000000fb02 d2ff0000000000009001000000000440002243616c69627269000000000000000000000 00000000000000000000000000000040000002d010100040000002d010100040000002 d010100050000000902000000020d000000320a2c00000001000400000000003408740 c20001b0005000000090200000002040000002d010000040000002d010000030000000 000 Laboratorium Mikrobiologi FK UII 1
- 2. * Pengecatan LPCB 0100090000038d00000002001c00000000000400000003010800050000000b02000000 00050000000c02740c3208040000002e0118001c000000fb021000070000000000bc02 000000000102022253797374656d007628fcb608dc9d2800cc031f7640912276d84db5 08e89d2800040000002d010000040000002d01000004000000020101001c000000fb02 d2ff0000000000009001000000000440002243616c69627269000000000000000000000 00000000000000000000000000000040000002d010100040000002d010100040000002 d010100050000000902000000020d000000320a2c00000001000400000000003408740 c20001b0005000000090200000002040000002d010000040000002d010000030000000 000 Membuat mikrokultur (slide culture) 0100090000038d00000002001c00000000000400000003010800050000000b02000000 00050000000c02740c3208040000002e0118001c000000fb021000070000000000bc02 000000000102022253797374656d007628fcb608dc9d2800cc031f7640912276d84db5 08e89d2800040000002d010000040000002d01000004000000020101001c000000fb02 d2ff0000000000009001000000000440002243616c69627269000000000000000000000 00000000000000000000000000000040000002d010100040000002d010100040000002 d010100050000000902000000020d000000320a2c00000001000400000000003408740 c20001b0005000000090200000002040000002d010000040000002d010000030000000 000 Tugas praktikan : Membuat preparat dari spesimen jamur yang tersedia (2 spesimen) Melakukan pengecatan preparat dengan cat Gram dan LPCB Menggambar hasil contoh preparat mikroskopik Candida sp Menggambar hasil contoh biakan jamur pada agar Sabouroud: C. Albicans, Rhizopus
- 3. sp, Trichophyton sp, Trichophyton rubrum, Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger HASIL Laboratorium Mikrobiologi FK UII 3
- 4. PEMBAHASAN
- 5. KESIMPULAN Yogyakarta, 20... Mengetahui dosen/asisten, Praktikan ( ) ( ) Laboratorium Mikrobiologi FK UII 5