Iwcf temp 2018
•
0 likes•70 views
Ahmed Ibrahim Ahmed Elbanouby successfully completed the Drilling Well Control Programme Surface BOP Stack Level 4 examination at GESCO Group Centre Number 563 on July 21, 2016. This temporary certificate is valid for 90 days until October 19, 2016. The certificate number is T-563-00037862.
Report
Share
Report
Share
Download to read offline
Recommended
IWCF Drilling Well Control Programme - Surface BOP Stack - Level 2 - 12-2015 
Mohamed Alaaeldin Farouk Mahmoud Fahmy successfully completed the Drilling Well Control Programme Surface BOP Stack Level 2 examination on December 17, 2015 at Oil and Gas Skills Centre. This temporary certificate is valid for 90 days until March 16, 2016, and any questions about its authenticity or validity should be directed to IWCF.
IWCF Temporary Certificate
This temporary certificate confirms that Charles Chiemeziem Ahamefule successfully completed the Drilling Well Control Programme Combined Surface and Subsea BOP Stack Level 3 examination on June 26, 2015 at JC International Limited Centre Number 691. The certificate will remain valid for 90 days until September 24, 2015.
iwcf certificate
This temporary certificate confirms that PARSHAW JYOTI NEOG successfully completed the Drilling Well Control Programme Surface BOP Stack Level 3 examination on July 15, 2016 at Oil India Limited Centre Number 842. The certificate will remain valid for 90 days until October 13, 2016. Should any clarification regarding the authenticity or validity of this certificate be required, please contact IWCF.
IWCF
This Temporary Certificate confirms that Mohamed Hassan Ebrahim Mousa successfully completed the Drilling Well Control Programme Surface BOP Stack Level 3 at Intertek Consulting & Training Randy Smith Well Control Centre Number: 424 on February 26, 2015. The certificate will remain valid for 90 days until its expiry on May 27, 2015.
AC-LE-IAA - Mohamed Baioumy Fahmy El Gamal
Mohamed Baioumy Fahmy El Gamal has been approved by IWCF to instruct the following programs:
- Drilling Well Control Programme at Levels 2, 3, and 4 for Surface BOP and Combined Surface/Subsea BOP. Approval expires March 13, 2017.
- Well Intervention Pressure Control Programme at Levels 2, 3, and 4 for Wireline Operations and Coiled Tubing Operations. Approval expires September 9, 2017.
The letter from Rae Archibald at IWCF confirms Mohamed Baioumy Fahmy El Gamal's instructor approval and provides contact information should any queries arise regarding the approval.
CR-695700
Nirmal Dutta successfully completed the Drilling Well Control Programme Surface BOP Stack Level 4 examination at Oil India Limited Centre Number 842 on December 9, 2016. This temporary certificate is valid for 90 days until March 9, 2017. The International Well Control Forum issued the certificate and any questions about its authenticity or validity should be directed to their certification department.
CERTIFICATE OF TRAINING AND EXAMINATION
Daryl Andrew Leong has successfully completed an 80 hour Welding Inspector Level 1 training course from June 20, 2016 to July 1, 2016 at the African NDT Centre in Centurion, South Africa. He received a certificate on July 1, 2016 acknowledging his passing of the BINDT approved examination with scores of 86% on practical examination and 95% on general theory examination to qualify as a Welding Inspector Level 1. The training was conducted according to the training scheme of QP-TRG-1045 and examination was to the standard of PCN WI Annex A.
BRANDO
This certificate certifies that Brando Rhoda completed a Health & Safety Representative training from July 20, 2015 to July 20, 2015 and was assessed as competent. The certificate was issued on July 20, 2015 and recommends a refresher date of July 20, 2017.
Recommended
IWCF Drilling Well Control Programme - Surface BOP Stack - Level 2 - 12-2015
Mohamed Alaaeldin Farouk Mahmoud Fahmy successfully completed the Drilling Well Control Programme Surface BOP Stack Level 2 examination on December 17, 2015 at Oil and Gas Skills Centre. This temporary certificate is valid for 90 days until March 16, 2016, and any questions about its authenticity or validity should be directed to IWCF.
IWCF Temporary Certificate
This temporary certificate confirms that Charles Chiemeziem Ahamefule successfully completed the Drilling Well Control Programme Combined Surface and Subsea BOP Stack Level 3 examination on June 26, 2015 at JC International Limited Centre Number 691. The certificate will remain valid for 90 days until September 24, 2015.
iwcf certificate
This temporary certificate confirms that PARSHAW JYOTI NEOG successfully completed the Drilling Well Control Programme Surface BOP Stack Level 3 examination on July 15, 2016 at Oil India Limited Centre Number 842. The certificate will remain valid for 90 days until October 13, 2016. Should any clarification regarding the authenticity or validity of this certificate be required, please contact IWCF.
IWCF
This Temporary Certificate confirms that Mohamed Hassan Ebrahim Mousa successfully completed the Drilling Well Control Programme Surface BOP Stack Level 3 at Intertek Consulting & Training Randy Smith Well Control Centre Number: 424 on February 26, 2015. The certificate will remain valid for 90 days until its expiry on May 27, 2015.
AC-LE-IAA - Mohamed Baioumy Fahmy El Gamal
Mohamed Baioumy Fahmy El Gamal has been approved by IWCF to instruct the following programs:
- Drilling Well Control Programme at Levels 2, 3, and 4 for Surface BOP and Combined Surface/Subsea BOP. Approval expires March 13, 2017.
- Well Intervention Pressure Control Programme at Levels 2, 3, and 4 for Wireline Operations and Coiled Tubing Operations. Approval expires September 9, 2017.
The letter from Rae Archibald at IWCF confirms Mohamed Baioumy Fahmy El Gamal's instructor approval and provides contact information should any queries arise regarding the approval.
CR-695700
Nirmal Dutta successfully completed the Drilling Well Control Programme Surface BOP Stack Level 4 examination at Oil India Limited Centre Number 842 on December 9, 2016. This temporary certificate is valid for 90 days until March 9, 2017. The International Well Control Forum issued the certificate and any questions about its authenticity or validity should be directed to their certification department.
CERTIFICATE OF TRAINING AND EXAMINATION
Daryl Andrew Leong has successfully completed an 80 hour Welding Inspector Level 1 training course from June 20, 2016 to July 1, 2016 at the African NDT Centre in Centurion, South Africa. He received a certificate on July 1, 2016 acknowledging his passing of the BINDT approved examination with scores of 86% on practical examination and 95% on general theory examination to qualify as a Welding Inspector Level 1. The training was conducted according to the training scheme of QP-TRG-1045 and examination was to the standard of PCN WI Annex A.
BRANDO
This certificate certifies that Brando Rhoda completed a Health & Safety Representative training from July 20, 2015 to July 20, 2015 and was assessed as competent. The certificate was issued on July 20, 2015 and recommends a refresher date of July 20, 2017.
WORK SAFELY at HEIGHTS
Alvin Rigby has attained the unit Work Safely at Heights according to a Statement of Attainment issued by Driveway Training Pty Ltd. A Statement of Attainment is awarded when an individual completes one or more units of a nationally recognized qualification, and this statement confirms Alvin Rigby successfully completed the safety training on May 24, 2015.
Apmp bid_and_proposal_management_foundation_2021_badge20210424-58-tysrgz
This certificate confirms that Steve Payne passed the Foundation Examination on April 24, 2021, demonstrating knowledge of managing bids and proposals. The certificate remains the property of APM Group Ltd and must be returned upon request. APM Group Ltd is located in High Wycombe, England and is the global authority for professionals who win business through proposals, bids, tenders, and presentations.
Overall_Certificates
This document is a diploma certifying that M.M.H. Elsayed passed the Safety for Operational Supervisors VCA examination. The diploma was issued on April 27, 2014 in Zevenbergschen Hoek, Netherlands and is valid for 10 years. It certifies that M.M.H. Elsayed successfully completed the exam, which was composed according to the attainment targets and testing targets specified by the CCVD-VCA. The exam was administered in English under supervision of the Dutch Foundation Stichting Examenkamer.
TAE 2015
This certificate certifies that Botros Reda Mikhaeil Bishai has completed the requirements for a Certificate IV in Training and Assessment. The certificate was issued by Westvic Staffing Solutions on January 21, 2015. Westvic Staffing Solutions is a registered training organization located in Warrnambool, Victoria that provides nationally recognized training programs.
T.S.Harriman NEBOSH Certificate
Terry Harriman has been awarded a Level 3 Certificate in Occupational Health and Safety (NEBOSH National General Certificate) by the National Examination Board in Occupational Safety and Health. The certificate confirms that Terry Harriman satisfied the examiners' requirements and was awarded this certificate on August 4, 2006. The National Examination Board in Occupational Safety and Health oversees qualifications and curriculum in occupational safety and health in the UK.
Level 7 Diploma - Hospitality and Tourism Management
Eric Borda has successfully completed the Qualifi Level 7 Diploma in Hospitality and Tourism Management. He earned a total of 120 credits for achieving the learning outcomes of 4 units, including Strategic Planning Facets in Hospitality and Tourism, Marketing Approaches in Hospitality and Tourism, Tourism Policy in International Context and Development, and The Culture and Society in Tourism. The qualification was awarded on August 3, 2020 by the London School of International Business.
Certificate IV in Customer Contact
Michael Shafik has fulfilled the requirements for a Certificate IV in Customer Contact. He achieved this through an Australian apprenticeship training scheme registered in Victoria. The certificate was issued on January 21, 2011 and competency was achieved on December 9, 2010. The qualification is recognized within the Australian Qualifications Framework and develops employability skills.
ICBA Membership Certificate
Matthew Edward Bulmer was admitted as a Certified Technical Financial Accountant by the Institute of Certified Bookkeepers and Accountants on May 7, 2012. His certificate is valid until December 31, 2016 and was reissued on April 18, 2016 under the seal of the Institute of Certified Bookkeepers and Accountants in South Africa.
Vessie CV
Sylvester van Niekerk provides his curriculum vitae detailing his personal and employment history. He has worked in various roles involving mechanical fitting, welding, spray painting, and hydraulic and boilermaking duties. His most recent position was as a foreman for Hydraulic Refreshment from July 2013 to August 2014. Currently he does contract boilermaking work and has various technical skills including welding.
Sanlam Accreditation Certificate Echelon
Henry Barnard has been accredited by Echelon Private Client Insurance for one year. The accreditation certificate confirms he meets their standards and is valid until September 16, 2017. It was signed by Mario Bailey on behalf of Echelon to certify his accreditation.
Company Presentation
Globo Consulting is a global leader in international staffing and payroll services. They provide services such as benefits management, payroll, taxes, and ensuring regulatory compliance across different countries. They have offices worldwide to offer local expertise and solutions to clients. Their services are customized for different worker types, including expatriates, national employees, contractors, and those working in locations without standard employment laws. Globo also assists with work visas and permits to help people and companies comply with local regulations.
Haithm Helmy CV
This document contains a resume for Haithm Helmy Abdou El-Said. It includes his contact information, education history, qualifications, work experience, skills, and hobbies. He has a Bachelor's Degree in Commerce from Suez Canal University and over 10 years of experience working at Oriental Petrochemicals Company as a Technical Operator in their polypropylene production facility. His roles included operating and monitoring various units like reactors, vent recovery, nitrogen generation, and purification. He also has skills in Microsoft Office, computer operating systems, and communication.
Assessor
This document confirms that Simon Mshiane's assessor registration with TETA has been extended to include additional qualifications and unit standards. His registration is now valid until November 2015. It lists the new qualification and 30 unit standards that Mr. Mshiane is now registered to assess. He is responsible for renewing his registration three months before it expires in November 2015. TETA congratulates Mr. Mshiane on his achievement.
VCDINGO CSC RESULT
Mr. Vonryan C. Diango passed the Career Service Examination - Paper and Pencil Test (Professional Level) held on May 03, 2015 in an unspecified location, with an overall rating of 80.19. His ratings in the competency areas were: Verbal - 82.53, Analytical - 75.19, Numerical - 79.99, and General Info - 86.53. The notice informs Mr. Diango that he must claim his official Certificate of Eligibility in person at the CSC office where he took the exam by presenting valid ID, application receipt, passport photo with nametag, and accomplished CS Form E6.
LNG Carriers and FSRUs
This document provides information about an upcoming energy conference on LNG carriers and floating storage and regasification units (FSRUs) to be held in Shanghai, China from June 17-20, 2014. The conference will include presentations from senior representatives from Chinese and Japanese shipyards and LNG carrier owners. Topics will include the growing demand for LNG carriers and FSRUs, opportunities in the LNG shipbuilding market in China, and technologies for LNG carrier propulsion systems. The document provides registration details such as fees, discounts for group registration, and payment options. It also lists contact information for the host hotel, the Grand Hyatt Shanghai.
Ahmed (cv)
Ahmed Hassanien Essayed Mohammed is seeking an accounting position in Cairo, Egypt. He has a diploma in tax accounting from Ain Shams University and a bachelor's degree in commerce also from Ain Shams University. He has work experience preparing financial statements and tax declarations for several companies at Elmeniawy office for accounting and auditing and is currently working at Baker tilly WAG office for auditing. In his free time, he enjoys reading, watching documentaries, and weight lifting.
KI Exam
A certificate certifies that Ericka Geldenhuys, with ID number 6506290110089, successfully completed the First Level Regulatory Examination for Financial Service Providers and Key Individuals in Categories I, II, IIA, III and IV. The examination was held on June 27, 2012 at the Durban Musgrave Centre.
senior trader
Mohamed El Sebaie has over 10 years of experience working in brokerage roles for various firms in Egypt. He currently works as a senior broker for HSBC Securities Egypt, where his responsibilities include providing execution services for customers, complying with all relevant rules and regulations, and implementing compliance policies. El Sebaie holds a B.S. in foreign trade from Helwan University and is a licensed broker and certified portfolio manager. In his free time, he enjoys surfing the internet and reading.
Cert IV in Project Management
This document certifies that Jane Doe has successfully completed the requirements for a Certificate IV in Project Management as of May 1, 2012. It was awarded by the Australian College of Project Management and verifies that Jane earned 28 professional development units for the course. The qualification is recognized within the Australian Qualifications Framework.
Cgspl
The document is an invitation from Candid Guard Services Private Limited looking for partners to join their ISO 9001:2000 certified organization. It outlines the infrastructure, staffing, capital expenditure, return on investment, duties, and competitive advantages of becoming a partner. Partners would initially work from home identifying and securing customers. Candid would provide guidance, marketing support, training, and technical assistance, while partners would earn monthly profits from their customer contracts and have the opportunity to significantly grow their earnings by adding new clients over time.
Karem Yosri Ahmed Akl (2)
Karem Yosri Ahmed Akl successfully completed the Drilling Well Control Programme Combined Surface and Subsea BOP Stack Level 4 examination on November 19, 2015 at GTSC Centre Number 487. This temporary certificate is valid for 90 days until February 17, 2016. The certificate confirms Karem Akl passed the exam and completed the required training.
CR-407690
Mohammed Qasim Mahdi Al-Battat successfully completed the Drilling Well Control Programme Surface BOP Stack Level 4 examination on January 14, 2017 at GTSC Centre Number 936. This temporary certificate is valid for 90 days until April 14, 2017. The certificate was issued by IWCF and any questions regarding its authenticity or validity should be directed to IWCF.
More Related Content
What's hot
WORK SAFELY at HEIGHTS
Alvin Rigby has attained the unit Work Safely at Heights according to a Statement of Attainment issued by Driveway Training Pty Ltd. A Statement of Attainment is awarded when an individual completes one or more units of a nationally recognized qualification, and this statement confirms Alvin Rigby successfully completed the safety training on May 24, 2015.
Apmp bid_and_proposal_management_foundation_2021_badge20210424-58-tysrgz
This certificate confirms that Steve Payne passed the Foundation Examination on April 24, 2021, demonstrating knowledge of managing bids and proposals. The certificate remains the property of APM Group Ltd and must be returned upon request. APM Group Ltd is located in High Wycombe, England and is the global authority for professionals who win business through proposals, bids, tenders, and presentations.
Overall_Certificates
This document is a diploma certifying that M.M.H. Elsayed passed the Safety for Operational Supervisors VCA examination. The diploma was issued on April 27, 2014 in Zevenbergschen Hoek, Netherlands and is valid for 10 years. It certifies that M.M.H. Elsayed successfully completed the exam, which was composed according to the attainment targets and testing targets specified by the CCVD-VCA. The exam was administered in English under supervision of the Dutch Foundation Stichting Examenkamer.
TAE 2015
This certificate certifies that Botros Reda Mikhaeil Bishai has completed the requirements for a Certificate IV in Training and Assessment. The certificate was issued by Westvic Staffing Solutions on January 21, 2015. Westvic Staffing Solutions is a registered training organization located in Warrnambool, Victoria that provides nationally recognized training programs.
T.S.Harriman NEBOSH Certificate
Terry Harriman has been awarded a Level 3 Certificate in Occupational Health and Safety (NEBOSH National General Certificate) by the National Examination Board in Occupational Safety and Health. The certificate confirms that Terry Harriman satisfied the examiners' requirements and was awarded this certificate on August 4, 2006. The National Examination Board in Occupational Safety and Health oversees qualifications and curriculum in occupational safety and health in the UK.
Level 7 Diploma - Hospitality and Tourism Management
Eric Borda has successfully completed the Qualifi Level 7 Diploma in Hospitality and Tourism Management. He earned a total of 120 credits for achieving the learning outcomes of 4 units, including Strategic Planning Facets in Hospitality and Tourism, Marketing Approaches in Hospitality and Tourism, Tourism Policy in International Context and Development, and The Culture and Society in Tourism. The qualification was awarded on August 3, 2020 by the London School of International Business.
Certificate IV in Customer Contact
Michael Shafik has fulfilled the requirements for a Certificate IV in Customer Contact. He achieved this through an Australian apprenticeship training scheme registered in Victoria. The certificate was issued on January 21, 2011 and competency was achieved on December 9, 2010. The qualification is recognized within the Australian Qualifications Framework and develops employability skills.
ICBA Membership Certificate
Matthew Edward Bulmer was admitted as a Certified Technical Financial Accountant by the Institute of Certified Bookkeepers and Accountants on May 7, 2012. His certificate is valid until December 31, 2016 and was reissued on April 18, 2016 under the seal of the Institute of Certified Bookkeepers and Accountants in South Africa.
Vessie CV
Sylvester van Niekerk provides his curriculum vitae detailing his personal and employment history. He has worked in various roles involving mechanical fitting, welding, spray painting, and hydraulic and boilermaking duties. His most recent position was as a foreman for Hydraulic Refreshment from July 2013 to August 2014. Currently he does contract boilermaking work and has various technical skills including welding.
Sanlam Accreditation Certificate Echelon
Henry Barnard has been accredited by Echelon Private Client Insurance for one year. The accreditation certificate confirms he meets their standards and is valid until September 16, 2017. It was signed by Mario Bailey on behalf of Echelon to certify his accreditation.
Company Presentation
Globo Consulting is a global leader in international staffing and payroll services. They provide services such as benefits management, payroll, taxes, and ensuring regulatory compliance across different countries. They have offices worldwide to offer local expertise and solutions to clients. Their services are customized for different worker types, including expatriates, national employees, contractors, and those working in locations without standard employment laws. Globo also assists with work visas and permits to help people and companies comply with local regulations.
Haithm Helmy CV
This document contains a resume for Haithm Helmy Abdou El-Said. It includes his contact information, education history, qualifications, work experience, skills, and hobbies. He has a Bachelor's Degree in Commerce from Suez Canal University and over 10 years of experience working at Oriental Petrochemicals Company as a Technical Operator in their polypropylene production facility. His roles included operating and monitoring various units like reactors, vent recovery, nitrogen generation, and purification. He also has skills in Microsoft Office, computer operating systems, and communication.
Assessor
This document confirms that Simon Mshiane's assessor registration with TETA has been extended to include additional qualifications and unit standards. His registration is now valid until November 2015. It lists the new qualification and 30 unit standards that Mr. Mshiane is now registered to assess. He is responsible for renewing his registration three months before it expires in November 2015. TETA congratulates Mr. Mshiane on his achievement.
VCDINGO CSC RESULT
Mr. Vonryan C. Diango passed the Career Service Examination - Paper and Pencil Test (Professional Level) held on May 03, 2015 in an unspecified location, with an overall rating of 80.19. His ratings in the competency areas were: Verbal - 82.53, Analytical - 75.19, Numerical - 79.99, and General Info - 86.53. The notice informs Mr. Diango that he must claim his official Certificate of Eligibility in person at the CSC office where he took the exam by presenting valid ID, application receipt, passport photo with nametag, and accomplished CS Form E6.
LNG Carriers and FSRUs
This document provides information about an upcoming energy conference on LNG carriers and floating storage and regasification units (FSRUs) to be held in Shanghai, China from June 17-20, 2014. The conference will include presentations from senior representatives from Chinese and Japanese shipyards and LNG carrier owners. Topics will include the growing demand for LNG carriers and FSRUs, opportunities in the LNG shipbuilding market in China, and technologies for LNG carrier propulsion systems. The document provides registration details such as fees, discounts for group registration, and payment options. It also lists contact information for the host hotel, the Grand Hyatt Shanghai.
Ahmed (cv)
Ahmed Hassanien Essayed Mohammed is seeking an accounting position in Cairo, Egypt. He has a diploma in tax accounting from Ain Shams University and a bachelor's degree in commerce also from Ain Shams University. He has work experience preparing financial statements and tax declarations for several companies at Elmeniawy office for accounting and auditing and is currently working at Baker tilly WAG office for auditing. In his free time, he enjoys reading, watching documentaries, and weight lifting.
KI Exam
A certificate certifies that Ericka Geldenhuys, with ID number 6506290110089, successfully completed the First Level Regulatory Examination for Financial Service Providers and Key Individuals in Categories I, II, IIA, III and IV. The examination was held on June 27, 2012 at the Durban Musgrave Centre.
senior trader
Mohamed El Sebaie has over 10 years of experience working in brokerage roles for various firms in Egypt. He currently works as a senior broker for HSBC Securities Egypt, where his responsibilities include providing execution services for customers, complying with all relevant rules and regulations, and implementing compliance policies. El Sebaie holds a B.S. in foreign trade from Helwan University and is a licensed broker and certified portfolio manager. In his free time, he enjoys surfing the internet and reading.
Cert IV in Project Management
This document certifies that Jane Doe has successfully completed the requirements for a Certificate IV in Project Management as of May 1, 2012. It was awarded by the Australian College of Project Management and verifies that Jane earned 28 professional development units for the course. The qualification is recognized within the Australian Qualifications Framework.
Cgspl
The document is an invitation from Candid Guard Services Private Limited looking for partners to join their ISO 9001:2000 certified organization. It outlines the infrastructure, staffing, capital expenditure, return on investment, duties, and competitive advantages of becoming a partner. Partners would initially work from home identifying and securing customers. Candid would provide guidance, marketing support, training, and technical assistance, while partners would earn monthly profits from their customer contracts and have the opportunity to significantly grow their earnings by adding new clients over time.
What's hot (20)
Apmp bid_and_proposal_management_foundation_2021_badge20210424-58-tysrgz
Apmp bid_and_proposal_management_foundation_2021_badge20210424-58-tysrgz
Level 7 Diploma - Hospitality and Tourism Management
Level 7 Diploma - Hospitality and Tourism Management
Similar to Iwcf temp 2018
Karem Yosri Ahmed Akl (2)
Karem Yosri Ahmed Akl successfully completed the Drilling Well Control Programme Combined Surface and Subsea BOP Stack Level 4 examination on November 19, 2015 at GTSC Centre Number 487. This temporary certificate is valid for 90 days until February 17, 2016. The certificate confirms Karem Akl passed the exam and completed the required training.
CR-407690
Mohammed Qasim Mahdi Al-Battat successfully completed the Drilling Well Control Programme Surface BOP Stack Level 4 examination on January 14, 2017 at GTSC Centre Number 936. This temporary certificate is valid for 90 days until April 14, 2017. The certificate was issued by IWCF and any questions regarding its authenticity or validity should be directed to IWCF.
Tem Certificate - NICHOLAS UDOH
Nicholas Peter Udoh successfully completed the Well Intervention Pressure Control Programme Level 4 including Wireline Operations at Rikline International Limited Centre Number 702 on April 25, 2016. This temporary certificate is valid for 90 days until July 24, 2016. The certificate number is T-702-00033025.
Tem Certificate - NICHOLAS UDOH
Nicholas Peter Udoh successfully completed the Well Intervention Pressure Control Programme Level 4 including Wireline Operations at Rikline International Limited Centre Number 702 on April 25, 2016. This temporary certificate is valid for 90 days until July 24, 2016. The certificate number is T-702-00033025.
Santhosh kumar A -CR-295966
Santhosh Kumar A successfully completed the Drilling Well Control Programme Surface BOP Stack Level 2 examination on November 4, 2016 at Maersk Training India PVT.LTD Centre Number: 699. This temporary certificate is valid for 90 days until February 2, 2017. The International Well Control Forum can be contacted to verify the authenticity or validity of the certificate.
AC-LE-PAA - Juan Gabriel Plazas Quiroga
The document is a letter from IWCF confirming that Juan Gabriel Plazas Quiroga has been granted full accreditation as a practical assessor for drilling well control programs at levels 2, 3, and 4 for surface BOP and confirming the expiry date of his approval. It was sent to Edwin Ritchie of Canadian Drilling School Inc and signed by Rae Archibald, IWCF's Training Quality Supervisor.
AC-LE-PPCA-V00 Provisional Primary Centre Approval - Soliman Well Control School
AC-LE-PPCA-V00 Provisional Primary Centre Approval - Soliman Well Control SchoolSoleman for training and Consulting
The document provides provisional approval and accreditation to Soliman Well Control School (SWCS) in Cairo, Egypt as a primary training center by the International Well Control Forum (IWCF). SWCS is granted provisional accreditation until November 2018 to offer IWCF certification programs in drilling well control at levels 2 through 4. Full accreditation requires an audit in November 2014 to ensure any non-conformances are addressed. The letter specifies training room and test session capacity limits and requirements for conducting practical assessments and written tests at the accredited location according to IWCF standards.Smarp OY ISMS 2016-01-2
This certificate confirms that Smarp OY, located in Helsinki, Finland, has met the requirements of ISO/IEC 27001:2013 for its provision of a software-as-a-service platform for communication and collaboration, as described in its statement of applicability dated March 14, 2016. The certificate is issued by Exova (UK) Ltd and is valid from April 5, 2016 to April 4, 2019.
Similar to Iwcf temp 2018 (8)
AC-LE-PPCA-V00 Provisional Primary Centre Approval - Soliman Well Control School
AC-LE-PPCA-V00 Provisional Primary Centre Approval - Soliman Well Control School
Recently uploaded
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaTechnical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recently uploaded (20)
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Iwcf temp 2018
- 1. Temporary Certificate This Temporary Certificate confirms that Ahmed Ibrahim Ahmed Elbanouby Date of Birth: 07 Nov 1979 successfully completed the Drilling Well Control Programme Surface BOP Stack Level 4 at GESCO Group Centre Number: 563 Examination Date: 21 Jul 2016 This certificate will remain valid for a period of 90 days Expiry Date: 19 Oct 2016 Should any clarification regarding the authenticity or validity of this certificate be required, please contact IWCF at certification@iwcf.org Certificate Number: T-563-00037862 Chief Executive Officer: Inchbraoch House South Quay Montrose Angus DD10 9UA United Kingdom Telephone: +44 1674 678120 Fax : +44 1674 678125 IWCF is a non-profit association (Stichting), registered at the Dutch Chamber of Commerece, The Hague, No. 411157732. International Well Control Forum Candidate ID: CR-870716